e5e7e4687d
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/branches/2.8@16904 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
800 lines
30 KiB
Perl
Executable File
800 lines
30 KiB
Perl
Executable File
#!/usr/bin/perl
|
|
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
|
|
|
|
# xCAT post script for configuring additional ethernet nics. Information is
|
|
# retreieved from nics table. Environment variables are set in the postscript
|
|
# The nic (i.e. eth1, en1) is passed as the only argument.
|
|
# Environment variables are set in the postscript in the mypostscript.tmpl
|
|
# file on the management node:
|
|
#
|
|
#
|
|
# NICNODE - the name of the node minus the NICHOSTNAMESUFFIXES
|
|
# NICIPS - the ip address for this nic
|
|
# NICTYPES - for configeth - this must be ethernet
|
|
# NICCUSTOMSCRIPTS - parsed in confignics to invoke this script if set. (not used here)
|
|
# NICNETWORKS - the network this nic is attached to. Must also verify this network is
|
|
# set in the networks table.
|
|
|
|
use strict;
|
|
use Socket;
|
|
|
|
#process arguments. Currently supported arguments are:
|
|
# -c nics_to_configure,
|
|
# -u nics_to_unconfigure
|
|
# Both arguments are comma separated list of nics, i.e. eth0,eth1,ib0,ib1
|
|
# it is possible that only -u may be specified to unconfigure nics and there will be no
|
|
# nics to configure. Likewise, there may be nics to configure but not nics to unconfigure.
|
|
my $nics = '';
|
|
my $rm_nics = '';
|
|
my $a;
|
|
while ($a = shift(@ARGV)) {
|
|
if ($a eq "-c") {
|
|
$a = shift(@ARGV);
|
|
if (!$a || $a=~/^-/) {
|
|
# no arg specified for -c
|
|
system("logger -t xcat -p local4.err 'configeth: No argument specified for -c flag'");
|
|
exit 1;
|
|
}
|
|
else {
|
|
$nics = $a;
|
|
}
|
|
}
|
|
elsif ($a eq "-u") {
|
|
$a = shift(@ARGV);
|
|
if (!$a || $a=~/^-/) {
|
|
# no arg specified for -c
|
|
system("logger -t xcat -p local4.err 'configeth: No argument specified for -c flag'");
|
|
exit 1;
|
|
}
|
|
else {
|
|
$rm_nics = $a;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ( !$nics && !$rm_nics ) {
|
|
system("logger -t xcat -p local4.err 'configeth: incorrect argument specified for -c flag'");
|
|
exit 1;
|
|
}
|
|
|
|
my $nicips = $ENV{NICIPS};
|
|
my $nicnetworks = $ENV{NICNETWORKS};
|
|
my $nicnode = $ENV{NICNODE};
|
|
my $net_cnt = $ENV{NETWORKS_LINES};
|
|
|
|
my $cfg_nic_ref_hash = {}; # set from get_install_nic
|
|
|
|
my $netmask ='';
|
|
my $ipaddr = '';
|
|
my $nic_num = '';
|
|
my $subnet = '';
|
|
my $gateway = ''; # this is only used for ipv6, ipv4 gateway is assigned by dhcp
|
|
my $ipv4nic = 0;
|
|
my $nic_net = '';
|
|
my $net_name = '';
|
|
my @nic_nets_all = (); # array of all networks for this nic
|
|
my @nic_nets4 = (); # array of ipv4 networks for this nic
|
|
my @nic_nets6 = (); # array of ipv6 networks for this nic
|
|
my @nic_ips_all =(); # array of all ip addresses for this nic
|
|
my @nic_ips4 =(); # array of ipv4 addresses for this nic
|
|
my @nic_ips6 =(); # array of ipv6 addresses for this nic
|
|
my @networks = (); # array of all networks from networks table.
|
|
# { network_name, subnet, netmask }
|
|
|
|
system("logger -t xcat -p local4.err 'configeth: NICS: $nics'");
|
|
system("logger -t xcat -p local4.err 'configeth: REMOVE_NICS: $rm_nics'");
|
|
system("logger -t xcat -p local4.err 'configeth: NICNETWORKS: $nicnetworks'");
|
|
system("logger -t xcat -p local4.err 'configeth: NICIPS: $nicips'");
|
|
|
|
# First process nics that need to be removed.
|
|
if ($rm_nics) {
|
|
my $i;
|
|
my @nics_rm = split(/,/, $rm_nics);
|
|
for ($i=0; $i < (scalar @nics_rm); $i++) {
|
|
if ($^O =~ /^aix/i) {
|
|
# Still need to figure out AIX command ifconfig down and remove (chdev ?) interface
|
|
# Start by looking at the same command that configures.
|
|
}
|
|
elsif (($ENV{OSVER} && ($ENV{OSVER} =~ /sles|suse/i)) || (-f "/etc/SuSE-release")) {
|
|
# on suse/sles ip aliases go in the same file as the base. Need to remove lines
|
|
# specific to the aliases after taking the interface down.
|
|
|
|
runcmd("ifdown $nics_rm[$i]");
|
|
|
|
# update or remove config file.
|
|
my $dir = "/etc/sysconfig/network";
|
|
# just move nic file to file.old
|
|
`mv $dir/ifcfg-$nics_rm[$i] $dir/ifcfg-$nics_rm[$i].old`;
|
|
|
|
}
|
|
else {
|
|
# OS is redhat.
|
|
# Note that the ifdown command will fail if the configuration file does not exist
|
|
# in the /etc/sysconfig/network-scripts directory. Therefore check that the
|
|
# nic config file exists prior to ifdown. Otherwise the nic is already deconfigured.
|
|
|
|
my $dir = "/etc/sysconfig/network-scripts";
|
|
if (-e "$dir/ifcfg-$nics_rm[$i]") {
|
|
|
|
runcmd("ifdown $nics_rm[$i]");
|
|
|
|
# For now remove all aliased files - i.e. nic_name:1)
|
|
my $aliases = "$dir/ifcfg-$nics_rm[$i]:*";
|
|
my @files = glob($aliases);
|
|
unlink @files;
|
|
|
|
# Remove base config file.
|
|
$aliases = "$dir/ifcfg-$nics_rm[$i]";
|
|
@files = glob($aliases);
|
|
unlink @files;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# create array of network info. Needed in case where there are
|
|
# more than one ip address per nic and shouldn't be many networks.
|
|
my $net_info;
|
|
my $cnt = 1;
|
|
|
|
while ( $cnt <= $net_cnt ) {
|
|
$net_info = $ENV{"NETWORKS_LINE$cnt"};
|
|
$net_info =~ /^netname=([^\|]*)\|\|/;
|
|
$net_name = $1;
|
|
$net_info =~ /net=([^\|]*)\|\|/;
|
|
$subnet = $1;
|
|
$net_info =~ /mask=([^\|]*)\|\|/;
|
|
$netmask = $1;
|
|
$net_info =~ /gateway=([^\|]*)\|\|/;
|
|
$gateway = $1;
|
|
push @{ $networks[$cnt-1] }, ($net_name, $subnet, $netmask, $gateway);
|
|
$cnt +=1;
|
|
}
|
|
|
|
|
|
# Start processing of nics to install here.
|
|
|
|
my $j;
|
|
|
|
my @nics_to_install = split(/,/, $nics);
|
|
for ($j=0; $j < (scalar @nics_to_install); $j++) {
|
|
my $nic = $nics_to_install[$j];
|
|
# reset some variables inside this loop
|
|
@nic_ips4 = ();
|
|
@nic_ips6 = ();
|
|
@nic_nets4 = ();
|
|
@nic_nets6 = ();
|
|
|
|
#get current ips on this nic
|
|
my $str_ret = `ip addr show dev $nic 2>/dev/null | grep inet | grep -v link | grep -v dynamic | awk '{print \$2}'`;
|
|
my $bool_config_flag = 0;
|
|
my %hash_oldips;
|
|
if ($str_ret) {
|
|
foreach (split /\n/, $str_ret){
|
|
$hash_oldips{$_} = 1;
|
|
}
|
|
$bool_config_flag = 1;
|
|
}
|
|
|
|
# get network or networks for this nic from NICNETWORKS:
|
|
# eth0:1_0_0_0-255_255_0_0|network2,eth1:1_1_0_0
|
|
# create array of networks for this nic
|
|
foreach my $nic_networks (split(/,/,$nicnetworks)) {
|
|
my @net = ();
|
|
if ( $nic_networks =~ /!/ ) {
|
|
@net = split(/!/,$nic_networks);
|
|
} else {
|
|
@net = split(/:/,$nic_networks);
|
|
}
|
|
if ($net[0] eq $nic) {
|
|
@nic_nets_all = split(/\|/,$net[1]);
|
|
last;
|
|
}
|
|
}
|
|
|
|
# Put all ipv4 nets into nic_nets4,
|
|
# put all ipv6 nets into nic_nets6.
|
|
my $i = 0;
|
|
for ($i=0; $i < (scalar @nic_nets_all) ; $i++ ) {
|
|
# The network name itself does not indicate ipv4 or ipv6
|
|
# should use the subnet to determine.
|
|
# Do not use foreach (@networks), needs to keep the order of nets and ips
|
|
my $net = $nic_nets_all[$i];
|
|
foreach my $netinfo (@networks)
|
|
{
|
|
if ($netinfo->[0] eq $net)
|
|
{
|
|
if ($netinfo->[1] =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/)
|
|
{
|
|
push @nic_nets4, $net;
|
|
} elsif ($netinfo->[1] =~ /:/) {
|
|
push @nic_nets6, $net;
|
|
} else {
|
|
system("logger -t xcat -p local4.err 'The subnet $net is not valid.'");
|
|
}
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
# get all nic ipaddress from $nicips: i.e. eth0:1.0.0.1|2.0.0.1,eth1:1.1.1.1
|
|
# Then get all ips for this specific nic, i.e. eth0.
|
|
foreach my $ips (split(/,/,$nicips)) {
|
|
my @ip = ();
|
|
if ( $ips =~ /!/ ) {
|
|
@ip = split(/!/,$ips);
|
|
} else {
|
|
@ip = split(/:/,$ips);
|
|
}
|
|
if ($ip[0] eq $nic ) {
|
|
@nic_ips_all = split(/\|/,$ip[1]);
|
|
}
|
|
}
|
|
|
|
# Put all ipv4 addresses in @nic_ips4,
|
|
# put all ipv6 addresses in @nic_ips6.
|
|
# Do not use forach, needs to keep the order of networks and ips
|
|
for ($i=0; $i < (scalar @nic_ips_all) ; $i++ ) {
|
|
my $ip = $nic_ips_all[$i];
|
|
# ipv4 address
|
|
if ($ip =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) {
|
|
push @nic_ips4, $ip;
|
|
} elsif ($ip =~ /:/) { # ipv6
|
|
push @nic_ips6, $ip;
|
|
} else {
|
|
system("logger -t xcat -p local4.err 'configeth: The ip address $ip is not valid.'");
|
|
}
|
|
}
|
|
|
|
for ($i=0; $i < (scalar @nic_ips4) ; $i++ ) {
|
|
|
|
# ipv6 configuration needs to know if this nic as ipv4 configured
|
|
$ipv4nic = 1;
|
|
|
|
# Time to create the interfaces.
|
|
# loop through the nic networks, find the matching networks to get the
|
|
# subnet and netmask and then create the appropriate ifcfg file for linux
|
|
# or invoke correct AIX command.
|
|
my $specific_nic = $nic;
|
|
if ($i > 0) {
|
|
$specific_nic = $nic . ":" . ($i);
|
|
}
|
|
|
|
$cnt = 0;
|
|
$subnet = "";
|
|
$netmask = "";
|
|
$net_name = "";
|
|
while ( $cnt < $net_cnt ) {
|
|
if ( $networks[$cnt][0] eq $nic_nets4[$i] ) {
|
|
|
|
$subnet = $networks[$cnt][1];
|
|
$netmask = $networks[$cnt][2];
|
|
$cnt = $net_cnt; # found match - get out.
|
|
}
|
|
else {
|
|
$cnt++;
|
|
}
|
|
}
|
|
|
|
# check that there is a subnet and netmask set
|
|
if ( !(length($subnet) > 0) || !(length($netmask) > 0) ) {
|
|
system("logger -t xcat -p local4.err 'configeth: network subnet or netmask not set.'");
|
|
exit 1;
|
|
}
|
|
|
|
if ($bool_config_flag) {
|
|
my $num_masklength = 32;
|
|
if ($netmask =~ /\d+\.\d+\.\d+\.\d+/){
|
|
my $maskn = unpack("N", inet_aton($netmask));
|
|
my $bin = unpack ("B32", pack("N", $maskn));
|
|
my @dup = ( $bin =~ /(1{1})0*/g);
|
|
$num_masklength = scalar ( @dup );
|
|
}
|
|
else {
|
|
$num_masklength = $netmask
|
|
}
|
|
|
|
my $str_ipmask = $nic_ips4[$i] . "/" . $num_masklength;
|
|
if ($hash_oldips{$str_ipmask}) {
|
|
delete $hash_oldips{$str_ipmask};
|
|
}
|
|
}
|
|
#should delete the old alias configure ( like ifcfg-eth0:1 )before new configure
|
|
#only do this operation on redaht/sl/centos
|
|
if ( -f "/etc/sysconfig/network-scripts/ifcfg-$nic:1" ){
|
|
`rm -f /etc/sysconfig/network-scripts/ifcfg-$nic:*`;
|
|
}
|
|
|
|
if ($^O =~ /^aix/i) {
|
|
if ($i == 0) {
|
|
if ($nic_ips4[$i] =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) {
|
|
runcmd("chdev -l '$nic' -a netaddr=$nic_ips4[$i] -a netmask=$netmask -a state='up'");
|
|
# } else { #ipv6
|
|
# runcmd("autoconf6 -6i en$nic_num");
|
|
}
|
|
} else {
|
|
if ($nic_ips4[$i] =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) {
|
|
runcmd("chdev -l '$nic' -a alias4=$nic_ips4[$i],$netmask");
|
|
# } else { #ipv6
|
|
# runcmd("autoconf6 -6i en$nic_num");
|
|
}
|
|
}
|
|
}
|
|
elsif (($ENV{OSVER} && ($ENV{OSVER} =~ /sles|suse/i)) || (-f "/etc/SuSE-release")) {
|
|
# Write the info to the ifcfg file
|
|
my $dir = "/etc/sysconfig/network";
|
|
|
|
if ($i == 0 ) {
|
|
if (!open(FILE, ">$dir/ifcfg-$nic")) { system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic.'"); exit 1; }
|
|
# Not sure what is really REQUIRED from below -- copied the eth file from
|
|
# the system
|
|
print FILE "DEVICE=\'$nic\'\n";
|
|
print FILE "BOOTPROTO=\'static\'\n";
|
|
print FILE "NM_CONTROLLED=\'no\'\n";
|
|
print FILE "BROADCAST=\'\'\n";
|
|
print FILE "ETHTOOL_OPTIONS=\'\'\n";
|
|
print FILE "IPADDR=\'".$nic_ips4[$i]."\'\n";
|
|
print FILE "MTU=\'\'\n";
|
|
print FILE "NAME=\'\'\n";
|
|
print FILE "NETMASK=\'".$netmask."\'\n";
|
|
print FILE "NETWORK=\'".$subnet."\'\n";
|
|
print FILE "REMOTE_IPADDR=\'\'\n";
|
|
print FILE "STARTMODE=\'onboot\'\n";
|
|
print FILE "UNIQUE=\'\'\n";
|
|
print FILE "USERCONTROL=\'no\'\n";
|
|
print FILE "_nm_name=\'static-0\'\n";
|
|
|
|
} else {
|
|
# on suse/sles the ip alias info goes into the same file as the base ip info.
|
|
# open ifconfig-eth file and append additional info.
|
|
if (!open(FILE, ">>$dir/ifcfg-$nic")) { system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic for appending ip alias info'"); exit 1; }
|
|
|
|
print FILE "IPADDR_$i=\'".$nic_ips4[$i]."\'\n";
|
|
print FILE "NETMASK_$i=\'".$netmask."\'\n";
|
|
print FILE "NETWORK_$i=\'".$subnet."\'\n";
|
|
print FILE "LABEL_$i=\'".$i."\'\n";
|
|
}
|
|
close FILE;
|
|
runcmd("ifup $nic");
|
|
}
|
|
elsif ( -f "/etc/debian_version" ) {
|
|
preParse_Debian();
|
|
if ($i == 0) {
|
|
if (!open(FILE, ">/etc/network/interfaces.d/$nic")){
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open /etc/network/interfaces.d/$nic for appending ip alias info'");
|
|
exit 1;
|
|
}
|
|
|
|
print FILE "auto $nic\n";
|
|
print FILE "iface $nic inet static\n";
|
|
print FILE " address $nic_ips4[$i]\n";
|
|
print FILE " netmask $netmask\n";
|
|
print FILE " network $subnet\n";
|
|
}
|
|
else {
|
|
if (!open(FILE, ">>/etc/network/interfaces.d/$nic")){
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open /etc/network/interfaces.d/$nic for appending ip alias info'");
|
|
exit 1;
|
|
}
|
|
|
|
print FILE "auto $nic:$i\n";
|
|
print FILE "iface $nic:$i inet static\n";
|
|
print FILE " address $nic_ips4[$i]\n";
|
|
print FILE " netmask $netmask\n";
|
|
print FILE " network $subnet\n";
|
|
}
|
|
close FILE;
|
|
}
|
|
else {
|
|
# Write the info to the ifcfg file for redhat
|
|
my $dir = "/etc/sysconfig/network-scripts";
|
|
if (!open(FILE, ">$dir/ifcfg-$specific_nic")) { system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$specific_nic.'"); exit 1; }
|
|
print FILE "DEVICE=$specific_nic\n";
|
|
print FILE "BOOTPROTO=none\n";
|
|
print FILE "NM_CONTROLLED=no\n";
|
|
print FILE "IPADDR=$nic_ips4[$i]\n";
|
|
print FILE "NETMASK=$netmask\n";
|
|
#if (defined($gateway)) { print FILE "GATEWAY=$gateway\n"; }
|
|
print FILE "ONBOOT=yes\n";
|
|
close FILE;
|
|
|
|
runcmd("$dir/ifup $specific_nic");
|
|
}
|
|
# system("logger -t xcat -p local4.info 'configeth: successfully configured $specific_nic.'");
|
|
}
|
|
|
|
|
|
# ipv6 configuration
|
|
# ipv6 address does not use the nic alias like eth0:1,
|
|
# should use the main nic like eth0
|
|
my $configured = 0;
|
|
for ($i=0; $i < (scalar @nic_ips6) ; $i++ )
|
|
{
|
|
# Get the network information: netname, subnet, netmask
|
|
my $found = 0;
|
|
my $subnet;
|
|
my $prefixlen;
|
|
my $ipv6gateway;
|
|
my $ip6addr = $nic_ips6[$i];
|
|
my $net = $nic_nets6[$i];
|
|
foreach my $netinfo (@networks)
|
|
{
|
|
if ($netinfo->[0] eq $net)
|
|
{
|
|
$found = 1;
|
|
$subnet = $netinfo->[1];
|
|
$prefixlen = $netinfo->[2];
|
|
$ipv6gateway = $netinfo->[3];
|
|
}
|
|
# Remove the postfix like /64 from subnet
|
|
if ($subnet && ($subnet =~ /\//)) {
|
|
$subnet =~ s/\/.*$//;
|
|
}
|
|
|
|
# Remove the "/" from prefixlen
|
|
if ($prefixlen && ($prefixlen =~ /^\//))
|
|
{
|
|
$prefixlen =~ s/^\///;
|
|
}
|
|
}
|
|
if ($found == 0)
|
|
{
|
|
system("logger -t xcat -p local4.err 'configeth: Could not find network entry for ip address $ip6addr'");
|
|
next;
|
|
}
|
|
|
|
if ($bool_config_flag) {
|
|
my $str_ipmask = $ip6addr . '/' . $prefixlen;
|
|
if ($hash_oldips{$str_ipmask}){
|
|
delete $hash_oldips{$str_ipmask};
|
|
}
|
|
}
|
|
|
|
if ($^O =~ /^aix/i) {
|
|
if (!$configured)
|
|
{
|
|
runcmd("chdev -l en0 -a netaddr6=$ip6addr -a prefixlen=$prefixlen -a state=up");
|
|
$configured = 1;
|
|
} else {
|
|
runcmd("chdev -l en0 -a alias6=$ip6addr/$prefixlen");
|
|
}
|
|
} elsif (($ENV{OSVER} && ($ENV{OSVER} =~ /sles|suse/i)) || (-f "/etc/SuSE-release")) {
|
|
my $dir = "/etc/sysconfig/network";
|
|
# If there are only ipv6 addresses on this nic,
|
|
# needs to flush the ifcfg-$nic file when configuring the first ipv6 addr,
|
|
# to avoid duplicate entries when run confignics/configeth multiple times.
|
|
if (!$ipv4nic && !$configured)
|
|
{
|
|
if (!open(FILE, ">$dir/ifcfg-$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic.'");
|
|
exit 1;
|
|
}
|
|
print FILE "DEVICE=$nic\n";
|
|
print FILE "BOOTPROTO=static\n";
|
|
print FILE "NM_CONTROLLED=no\n";
|
|
print FILE "STARTMODE=onboot\n";
|
|
} else {
|
|
if (!open(FILE, ">>$dir/ifcfg-$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic.'");
|
|
exit 1;
|
|
}
|
|
}
|
|
# Use the label=ipv6$i in ifcfg-ethx file, like ipv60, ipv61
|
|
print FILE "LABEL_ipv6$i=ipv6$i\n";
|
|
print FILE "IPADDR_ipv6$i=$ip6addr\n";
|
|
print FILE "PREFIXLEN_ipv6$i=$prefixlen\n";
|
|
close FILE;
|
|
if ($ipv6gateway && $ipv6gateway !~ /xcatmaster/) {
|
|
# Do not add duplicate entries
|
|
`grep -E "default\\s+$ipv6gateway\\s+" /etc/sysconfig/network/routes 2>&1 1>/dev/null`;
|
|
if ($? != 0) {
|
|
`echo "default $ipv6gateway - -" >> /etc/sysconfig/network/routes`;
|
|
}
|
|
}
|
|
runcmd("ifup $nic");
|
|
}
|
|
elsif ( -f "/etc/debian_version" ){
|
|
if (!$ipv4nic && !$configured){
|
|
if (!open(FILE, ">/etc/network/interfaces.d/$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open /etc/network/interface.d/$nic.'");
|
|
exit 1;
|
|
}
|
|
print FILE "auto $nic\n";
|
|
}
|
|
else {
|
|
if (!open(FILE, ">>/etc/network/interfaces.d/$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open /etc/network/interface.d/$nic.'");
|
|
exit 1;
|
|
}
|
|
}
|
|
|
|
if (!$configured){
|
|
print FILE "pre-up modprobe ipv6\n";
|
|
print FILE "iface $nic inet6 static\n";
|
|
print FILE " address $ip6addr\n";
|
|
print FILE " netmask $prefixlen\n";
|
|
if ( $ipv6gateway && $ipv6gateway !~ /xcatmaster/ ){
|
|
print FILE " gateway $ipv6gateway\n";
|
|
}
|
|
$configured = 1;
|
|
}
|
|
else {
|
|
print FILE " post-up /sbin/ifconfig $nic inet6 add $ip6addr/$prefixlen\n";
|
|
print FILE " pre-down /sbin/ifconfig $nic inet6 del $ip6addr/$prefixlen\n";
|
|
}
|
|
close FILE;
|
|
}
|
|
else {
|
|
# Ubuntu TODO
|
|
my $dir = "/etc/sysconfig/network-scripts";
|
|
# If there are only ipv6 addresses on this nic,
|
|
# needs to flush the ifcfg-$nic file when configuring the first ipv6 addr,
|
|
# to avoid duplicate entries when run confignics/configeth multiple times.
|
|
if (!$ipv4nic && !$configured)
|
|
{
|
|
if (!open(FILE, ">$dir/ifcfg-$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic.'");
|
|
exit 1;
|
|
}
|
|
print FILE "DEVICE=$nic\n";
|
|
print FILE "BOOTPROTO=none\n";
|
|
print FILE "NM_CONTROLLED=no\n";
|
|
print FILE "ONBOOT=yes\n";
|
|
} else {
|
|
if (!open(FILE, ">>$dir/ifcfg-$nic")) {
|
|
system("logger -t xcat -p local4.err 'configeth: cannot open $dir/ifcfg-$nic.'");
|
|
exit 1;
|
|
}
|
|
}
|
|
if (!$configured) {
|
|
print FILE "IPV6INIT=yes\n";
|
|
print FILE "IPV6ADDR=$ip6addr/$prefixlen\n";
|
|
$configured = 1;
|
|
} else {
|
|
print FILE "IPV6ADDR_SECONDARIES=$ip6addr/$prefixlen\n";
|
|
}
|
|
if ($ipv6gateway && $ipv6gateway !~ /xcatmaster/) {
|
|
print FILE "IPV6_DEFAULTGW=$ipv6gateway\n";
|
|
}
|
|
close FILE;
|
|
runcmd("$dir/ifup-ipv6 $nic");
|
|
}
|
|
}
|
|
|
|
#still contains old ips, should ifdown the nic and then ifup
|
|
if ($^O =~ /linux/i){
|
|
my $ret = `ip addr show dev $nic | grep $nic | grep -i ,up`;
|
|
if ($ret) {
|
|
my $num_oldnums = scalar(keys %hash_oldips);
|
|
#need delete the ip address or first time configure
|
|
if (($num_oldnums > 0) || ($bool_config_flag == 0) ){
|
|
`ifdown $nic;ifup $nic`;
|
|
}
|
|
elsif ( -f "/etc/debian_version"){
|
|
`ifdown $nic;ifup $nic`;
|
|
}
|
|
else {
|
|
`ifup $nic`;
|
|
}
|
|
}
|
|
else {
|
|
`ifup $nic`;
|
|
}
|
|
}
|
|
}
|
|
exit 0;
|
|
|
|
|
|
sub runcmd {
|
|
my $cmd = shift @_;
|
|
$cmd .= ' 2>&1';
|
|
my @output = `$cmd`;
|
|
my $rc = $? >> 8;
|
|
if ($rc) {
|
|
system("logger -t xcat -p local4.err 'configeth: command $cmd failed with rc $rc: " . join('',@output) . "'");
|
|
my $errout= "configeth: command $cmd failed with rc $rc.";
|
|
`echo $errout`;
|
|
exit $rc;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
sub get_current_nics {
|
|
my @ip_addr_array = `ip addr show`;
|
|
|
|
my $nic_name;
|
|
my $nic_type;
|
|
my $nic_state;
|
|
my $nic_slave;
|
|
my $nic_mac;
|
|
my $bridgednics;
|
|
my $a_len = scalar(@ip_addr_array);
|
|
|
|
my %nics;
|
|
|
|
my $i = 0;
|
|
while ( $i < scalar(@ip_addr_array)) {
|
|
#print "array index $i: @ip_addr_array[$i]\n";
|
|
# check if line starts with "number: text:"
|
|
# if so then it is the start of a nic stanza which looks like:
|
|
# 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
|
|
# link/ether 5c:f3:fc:a8:bb:93 brd ff:ff:ff:ff:ff:ff
|
|
# inet 9.114.34.232/24 brd 9.114.34.255 scope global eth1
|
|
# inet6 fd55:faaf:e1ab:336:5ef3:fcff:fea8:bb93/64 scope global dynamic
|
|
# valid_lft 2591627sec preferred_lft 604427sec
|
|
# inet6 fd56::214:5eff:fe15:849b/64 scope global
|
|
# valid_lft forever preferred_lft forever
|
|
# inet6 fe80::5ef3:fcff:fea8:bb93/64 scope link
|
|
# valid_lft forever preferred_lft forever
|
|
|
|
if ( $ip_addr_array[$i] =~ /^(\d+): / ) {
|
|
# get nic name
|
|
$ip_addr_array[$i] =~ /^\d+: ([^:].*):/;
|
|
$nic_name = $1;
|
|
|
|
# get state of nic either "UP" if different, such as DOWN, not configured
|
|
# then assume state is DOWN.
|
|
if ($ip_addr_array[$i] =~ /,UP/ ) {
|
|
$nic_state = "UP";
|
|
}
|
|
else {
|
|
$nic_state = "DOWN";
|
|
}
|
|
|
|
# Check if this nic is part of a bridge or bonded interface. If bonded on
|
|
# redhat then "SLAVE" or "MASTER" will be in the first line of stanza
|
|
# inside <>.
|
|
#
|
|
# A bridged interface is a little different. The command, "brctl show", is used
|
|
# to show information about bridged interfaces. The subroutine get_bridged_nics()
|
|
# writes out $bridgednics which is a comma separated strings of bridged nics.
|
|
# If $nic_name matches a bridgednic then set nic_slave=1 for now to lump them
|
|
# with bonded nics for now since we will not unconfigure bridged or bonded nics.
|
|
#
|
|
$nic_slave = 0; # default to 0
|
|
if ($ip_addr_array[$i] =~ /SLAVE/ ) {
|
|
$nic_slave = 1;
|
|
}
|
|
if ($ip_addr_array[$i] =~ /MASTER/ ) {
|
|
$nic_slave = 1;
|
|
}
|
|
if ($nic_name =~ /$bridgednics/) {
|
|
$nic_slave = 1;
|
|
}
|
|
|
|
# example output shows type is "link/ether" for ethernet or
|
|
# "link/infiniband" for ib. Look ahead to next line for this.
|
|
$ip_addr_array[$i+1] =~ /^\s+link\/([a-z]+) /;
|
|
$nic_type = $1;
|
|
|
|
$i++;
|
|
|
|
# CHECK: it looks like there could be a usb nic ethernet adapter. Need to investigate
|
|
# if more needs to be done for that such as it is handled differently.
|
|
# If value is not "ether" or "infiniband" then continue on to next stanza
|
|
if ($nic_type ne "ether" && $nic_type ne "infiniband") {
|
|
next;
|
|
}
|
|
|
|
my @line = split(' ', $ip_addr_array[$i]);
|
|
$nic_mac = $line[1];
|
|
|
|
# move on to next line and loop through all lines for additional information or
|
|
# and until the line is the start of a new stanza.
|
|
# This is where things get dicey and may need enhancements:
|
|
# inet 70.0.0.182/24 brd 70.0.0.255 scope global eth5
|
|
# indicates an ipv4 address with a netmask of /24, a broadcast address,
|
|
# scope global nicname (eth5). If this was an aliased ip then nicname would be eth5:1 or such.
|
|
# inet6 fd55:faaf:e1ab:336:3640:b5ff:fe89:66c4/64 scope global dynamic
|
|
# it appears that valid ips have "scope global"
|
|
|
|
$i++;
|
|
# print "NIC: $nic_name, TYPE: $nic_type, MAC: $nic_mac SLAVE: $nic_slave, STATE: $nic_state \n";
|
|
$nics{$nic_name} = {};
|
|
$nics{$nic_name}->{state} = $nic_state;
|
|
$nics{$nic_name}->{mac} = $nic_mac;
|
|
$nics{$nic_name}->{slave} = $nic_slave;
|
|
$nics{$nic_name}->{type} = $nic_type;
|
|
$nics{$nic_name}->{ips} = [];
|
|
|
|
while ($i < scalar(@ip_addr_array) && !($ip_addr_array[$i] =~ /^(\d+): / ) ) {
|
|
# $ip_proto - is either inet or inet6
|
|
# $ip_mask is "ipaddr or ipv6addr"/netmask and possibly "brd broadcastip"
|
|
# $scope has the scope (global, link, site, host) if global or site then
|
|
# only data after scope is the nic "label", i.e. eth0, eth5:1.
|
|
# note that "tentative" may appear but is not a label.
|
|
# On RH for an ip alias with same netmask/subnet then line will be:
|
|
# inet 11.0.0.80/16 brd 11.0.255.255 scope global secondary eth2:1
|
|
|
|
my ($ip_proto, $ip_mask, $scope) =
|
|
$ip_addr_array[$i]=~/\s+(inet|inet6)\s+(.+)\s+scope\s+(.+)$/;
|
|
|
|
if ( $ip_proto =~ /inet/ ) { # line contains inet or inet6. Process info
|
|
my ($nic_ip_mask, $junk) = split(' ', $ip_mask);
|
|
my ($nic_ip, $nic_mask) = split('\/', $nic_ip_mask);
|
|
my ($sc, $label, $more_label) = split(' ', $scope);
|
|
if ( $sc ne "link" ) { # this is a valid one to keep
|
|
|
|
if ($label eq "secondary") {
|
|
$label = $more_label;
|
|
}
|
|
#print "\tPROTO: $ip_proto, IP: $nic_ip, MASK: $nic_mask, SCOPE: $sc, LABEL:$label\n";
|
|
push @{$nics{$nic_name}->{ips}},{ip => $nic_ip, netmask => $nic_mask, label => $label };
|
|
}
|
|
}
|
|
$i++;
|
|
}
|
|
next; # next nic stanza or end of file.
|
|
}
|
|
$i++;
|
|
}
|
|
return \%nics;
|
|
}
|
|
|
|
#before modify the configuration on ubuntu/debian, should preparse the interface file
|
|
#By default, All nics configuration are saved into /etc/network/interfaces, it is difficult for xcat to configure nic
|
|
#So only use source /etc/network/interfaces.d/* in "/etc/network/interfaces"
|
|
#create files under /etc/network/interfaces.d/ for each nic, then it is similar with the readhat and sles
|
|
sub preParse_Debian{
|
|
my $configfile;
|
|
|
|
open(FH, "<", "/etc/network/interfaces");
|
|
my @lines = <FH>;
|
|
close(FH);
|
|
|
|
if ($lines[0] =~ /XCAT_CONFIG/i){
|
|
return;
|
|
}
|
|
|
|
unless ( -e "/etc/network/interfaces.bak" ){
|
|
copy ("/etc/network/interfaces", "/etc/network/interfaces.bak");
|
|
}
|
|
|
|
unless ( -d "/etc/network/interfaces.d" ){
|
|
mkpath( "/etc/network/interfaces.d" );
|
|
}
|
|
|
|
open(FH, ">", "/etc/network/interfaces");
|
|
print FH "#XCAT_CONFIG\n";
|
|
print FH "source /etc/network/interfaces.d/* \n";
|
|
close(FH);
|
|
|
|
foreach my $line ( @lines ){
|
|
if ( $line =~ /^\s*$/){
|
|
next;
|
|
}
|
|
|
|
if ( $line =~ /^#.*/ ){
|
|
next;
|
|
}
|
|
|
|
my @attr = split /\s+/, $line;
|
|
if ( $attr[0] =~ /auto|allow-hotplug/){
|
|
my $i = 1;
|
|
while ( $i < @attr ){
|
|
open(SFH, ">", "/etc/network/interfaces.d/$attr[$i]");
|
|
print SFH "$attr[0] $attr[$i]\n";
|
|
close(SFH);
|
|
print FH "source /etc/network/interfaces.d/$attr[$i] \n";
|
|
$i = $i + 1;
|
|
}
|
|
}
|
|
elsif ($attr[0] =~ /mapping|iface/){
|
|
$configfile = "/etc/network/interfaces.d/$attr[1]";
|
|
open(SFH, ">>", $configfile);
|
|
unless ( -e $configfile){
|
|
print SFH "auto $attr[1] \n";
|
|
}
|
|
print SFH $line;
|
|
close(SFH);
|
|
}
|
|
else{
|
|
open(SFH, ">>", $configfile);
|
|
print SFH $line;
|
|
close(SFH);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|