d9d192de53
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@13740 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
157 lines
3.5 KiB
Plaintext
157 lines
3.5 KiB
Plaintext
=head1 NAME
|
|
|
|
B<chhypervisor> - Configure the virtualization hosts.
|
|
|
|
=head1 SYNOPSIS
|
|
|
|
B<RHEV specific :>
|
|
|
|
=over 2
|
|
|
|
B<chhypervisor> I<noderange> [B<-a>]
|
|
|
|
B<chhypervisor> I<noderange> [B<-n>]
|
|
|
|
B<chhypervisor> I<noderange> [B<-p>]
|
|
|
|
B<chhypervisor> I<noderange> [B<-e>]
|
|
|
|
B<chhypervisor> I<noderange> [B<-d>]
|
|
|
|
=back
|
|
|
|
=head1 DESCRIPTION
|
|
|
|
The B<chhypervisor> command can be used to configure the RHEV-h host.
|
|
|
|
The rhev-h host will register to the rhev-m automatically, but admin needs to
|
|
approve the host can be added to the 'cluster' with B<-a> flag .
|
|
|
|
After registering, the network interfaces of host need to be added to the 'network' of
|
|
RHEV. And the power management for the host should be configured so that
|
|
rhev-m could make proper decision when certain host encountered error.
|
|
|
|
For each host, an entry should be added to the hypervisor table:
|
|
|
|
The columns of hypervisor table:
|
|
|
|
=over 2
|
|
|
|
B<hypervisor.node> - rhev-h host name.
|
|
|
|
B<hypervisor.type> - Must be set to 'rhevh'.
|
|
|
|
B<hypervisor.mgr> - The rhev manager (The FQDN of rhev-m server) for the host.
|
|
|
|
B<hypervisor.interface> - The configuration for the nics. Refer to B<-n>.
|
|
|
|
B<hypervisor.cluster> - The cluster that the host will be added to. The
|
|
default is 'Default' cluster if not specified.
|
|
|
|
=back
|
|
|
|
=head1 OPTIONS
|
|
|
|
=over 2
|
|
|
|
=item B<-a>
|
|
Approve the host that to be added to cluster.
|
|
|
|
Before approve, the status of the host must be 'pending_approval'.
|
|
|
|
=item B<-n>
|
|
Configure the network interfaces for the host.
|
|
|
|
Note: This operation only can be run when host is in 'maintenance mode'.
|
|
Use B<-d> to switch the host to 'maintenance' mode.
|
|
|
|
The interfaces which configured in hypervisor.interface will be added
|
|
to the network of RHEV.
|
|
|
|
The format of hypervisor.interface is multiple [network:interfacename:
|
|
protocol:IP:netmask:gateway] sections separated with '|'. For example:
|
|
[rhevm2:eth0:static:10.1.0.236:255.255.255.0:0.0.0.0].
|
|
|
|
=over 2
|
|
|
|
B<network> - The logic network which has been created by 'cfgve -t nw'
|
|
or the default management network 'rhevm'.
|
|
|
|
B<interfacename> - Physical network name: 'eth0','eth1'...
|
|
|
|
B<protocol> - To identify which boot protocol to use for the interface: dhcp
|
|
or static.
|
|
|
|
B<IP> - The IP address for the interface.
|
|
|
|
B<netmask> - The network mask for the interface.
|
|
|
|
B<gateway> - The gateay for the interface. This field only can be set when
|
|
the interface is added to 'rhevm' network.
|
|
|
|
=back
|
|
|
|
=item B<-p>
|
|
Configure the power management for the host.
|
|
|
|
The power management must be configured for the rhev-h host to make the
|
|
rhev-m to monitor the power status of the host, so that when certain host
|
|
failed to function, rhev-m will fail over certain role like SPM to other active host.
|
|
|
|
For rack mounted server, the bmc IP and user:password need to be set for the
|
|
power management (These parameters are gotten from ipmi table). rhev-m uses the
|
|
ipmi protocol to get the power status of the host.
|
|
|
|
=item B<-e>
|
|
To activate the host.
|
|
|
|
=item B<-d>
|
|
To deactivate the host to maintenance mode.
|
|
|
|
=item B<-h>
|
|
Display usage message.
|
|
|
|
=back
|
|
|
|
=head1 RETURN VALUE
|
|
|
|
0 The command completed successfully.
|
|
|
|
1 An error has occurred.
|
|
|
|
=head1 EXAMPLES
|
|
|
|
=over 2
|
|
|
|
=item 1.
|
|
To approve the host 'host1', enter:
|
|
|
|
chhypervisor host1 -a
|
|
|
|
=item 2.
|
|
To configure the network interface for the host 'host1', enter:
|
|
|
|
chhypervisor host1 -n
|
|
|
|
=item 3.
|
|
To configure the power management for the host 'host1', enter:
|
|
|
|
chhypervisor host1 -p
|
|
|
|
=item 4.
|
|
To activate the host 'host1', enter:
|
|
|
|
chhypervisor host1 -e
|
|
|
|
=item 5.
|
|
To deactivate the host 'host1', enter:
|
|
|
|
chhypervisor host1 -d
|
|
|
|
=back
|
|
|
|
=head1 FILES
|
|
|
|
/opt/xcat/bin/chhypervisor
|
|
|