f8f04294fb
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@1270 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
331 lines
7.4 KiB
Plaintext
331 lines
7.4 KiB
Plaintext
=head1 NAME
|
|
|
|
B<rspconfig> - remote power control of nodes
|
|
|
|
=head1 SYNOPSIS
|
|
|
|
B<rspconfig> I<noderange> {B<alert>|B<snmpdest>|B<community>}
|
|
|
|
B<rspconfig> I<noderange> B<alert>={B<on>|B<enable>|B<off>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<snmpdest>=I<snmpmanager-IP>
|
|
|
|
B<rspconfig> I<noderange> B<community>={B<public>|I<string>}
|
|
|
|
B<rspconfig> [B<-h>|B<--help>|B<-v>|B<--version>]
|
|
|
|
=head2 BMC specific:
|
|
|
|
B<rspconfig> I<noderange> {B<ip>|B<netmask>|B<gateway>|B<backupgateway>|B<garp>}
|
|
|
|
B<rspconfig> I<noderange> B<garp>={I<time>}
|
|
|
|
=head2 MPA specific:
|
|
|
|
B<rspconfig> I<noderange> {B<sshcfg>|B<snmpcfg>|B<build>|B<pd1>|B<pd2>|B<network>|B<swnet>|B<ntp>}
|
|
|
|
B<rspconfig> I<noderange> B<sshcfg>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<snmpcfg>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
B<rspconfig> I<noderange> B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
B<rspconfig> I<noderange> B<network>={[B<ip>],[B<host>],[B<gateway>],[B<netmask>]|B<*>}
|
|
|
|
B<rspconfig> I<noderange> B<swnet>={[B<ip>],[B<gateway>],[B<netmask>]}
|
|
|
|
B<rspconfig> I<noderange> B<ntp>={[B<ntpenable>],[B<ntpserver>],[B<frequency>],[B<v3>]}
|
|
|
|
=head2 PPC specific:
|
|
|
|
B<rspconfig> I<noderange> {B<autopower>|B<iocap>|B<decfg>|B<memcfg>|B<procdecfg>|B<time>|B<date>|B<spdump>|B<sysdump>}
|
|
|
|
B<rspconfig> I<noderange> B<shcfg>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<snmpcfg>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
B<rspconfig> I<noderange> B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
B<rspconfig> I<noderange> B<autopower>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<iocap>={B<enable>|B<disable>}
|
|
|
|
B<rspconfig> I<noderange> B<time>={B<hh:mm:ss>}
|
|
|
|
B<rspconfig> I<noderange> B<date>={B<mm:dd:yyyy>}
|
|
|
|
B<rspconfig> I<noderange> B<decfg>={B<enable|disable>:B<policyname,...>}
|
|
|
|
B<rspconfig> I<noderange> B<procdecfg>={B<configure|deconfigure>:B<processingunit>:B<id,...>}
|
|
|
|
B<rspconfig> I<noderange> B<memdecfg>={B<configure|deconfigure>:B<processingunit>:B<unit|bank>:B<id,...>>}
|
|
|
|
=head1 DESCRIPTION
|
|
|
|
B<rspconfig> configures various settings in the nodes' service processors. If only a keyword is
|
|
specified, without the B<=>, it displays the current value.
|
|
|
|
=head1 OPTIONS
|
|
|
|
=over 4
|
|
|
|
=item B<alert>={I<on>|I<enable>|I<off>|I<disable>}
|
|
|
|
Turn on or off SNMP alerts.
|
|
|
|
=item B<autopower>={I<enable>|I<disable>}
|
|
|
|
Select the policy for auto power restart. If enabled, the system will boot automatically once power is restored after a power disturbance.
|
|
|
|
=item B<backupgateway>
|
|
|
|
Get the BMC backup gateway ip address.
|
|
|
|
=item B<build>
|
|
|
|
Get the MPA firmware build ID.
|
|
|
|
=item B<community>={B<public>|I<string>}
|
|
|
|
Get or set the SNMP commmunity value. The default is I<public>.
|
|
|
|
=item B<date>={I<mm:dd:yyy>}
|
|
|
|
Enter the current date.
|
|
|
|
=item B<decfg>={I<enable|disable>:I<policyname,...>}
|
|
|
|
Enables or disables deconfiguration policies.
|
|
|
|
=item B<frequency>
|
|
|
|
The NTP update frequency (in minutes).
|
|
|
|
=item B<garp>=I<time>
|
|
|
|
Get or set Gratuitous ARP generation interval. The unit is number of 1/2 second.
|
|
|
|
=item B<gateway>
|
|
|
|
The gateway ip address.
|
|
|
|
=item B<iocap>={I<enable>|I<disable>}
|
|
|
|
Select the policy for I/O Adapter Enlarged Capacity. This option controls the size of PCI memory space allocated to each PCI slot.
|
|
|
|
=item B<ip>
|
|
|
|
The ip address.
|
|
|
|
=item B<memdecfg>={I<configure|deconfigure>:I<processingunit>:I<unit|bank>:I<id,...>}
|
|
|
|
Select whether each memory bank should be enabled or disabled. State changes take effect on the next platform boot.
|
|
|
|
=item B<netmask>
|
|
|
|
The subnet mask.
|
|
|
|
=item B<network>={[I<ip>],[I<host>],[I<gateway>],[I<netmask>]|*}
|
|
|
|
Get or set the MPA network parameters. If '*' is specified, all parameters are read from the xCAT database.
|
|
|
|
=item B<nonred>
|
|
|
|
Allows loss of redundancy.
|
|
|
|
=item B<ntp>={[I<ntpenable>],[I<ntpserver>],[I<frequency>],[I<v3>]}
|
|
|
|
Get or set the MPA Network Time Protocol (NTP) parameters.
|
|
|
|
=item B<ntpenable>
|
|
|
|
Enable or disable NTP (enable|disable).
|
|
|
|
=item B<ntpserver>
|
|
|
|
Get or set NTP server IP address or name.
|
|
|
|
=item B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
Power Domain 1 - determines how an MPA responds to a loss of redundant power.
|
|
|
|
=item B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}
|
|
|
|
Power Domain 2 - determines how an MPA responds to a loss of redundant power.
|
|
|
|
=item B<procdecfg>={I<configure|deconfigure>:I<processingunit>:I<id,...>}
|
|
|
|
Selects whether each processor should be enabled or disabled. State changes take effect on the next platform boot.
|
|
|
|
=item B<redwoperf>
|
|
|
|
Prevents components from turning on that will cause loss of power redundancy.
|
|
|
|
=item B<redwperf>
|
|
|
|
Power throttles components to maintain power redundancy and prevents components from turning on that will cause loss of power redundancy.
|
|
|
|
=item B<snmpcfg>={I<enable>|I<disable>}
|
|
|
|
Enable or disable SNMP on MPA.
|
|
|
|
=item B<snmpdest>=I<snmpmanager-IP>
|
|
|
|
Get or set where the SNMP alerts should be sent to.
|
|
|
|
=item B<spdump>
|
|
|
|
Performs a service processor dump.
|
|
|
|
=item B<sshcfg>={I<enable>|I<disable>}
|
|
|
|
Enable or disable SSH on MPA.
|
|
|
|
=item B<swnet>={[I<ip>],[I<gateway>],[I<netmask>]}
|
|
|
|
Set the Switch network parameters.
|
|
|
|
=item B<sysdump>
|
|
|
|
Performs a system dump.
|
|
|
|
=item B<time>={I<hh:mm:ss>}
|
|
|
|
Enter the current time in UTC (Coordinated Universal Time) format.
|
|
|
|
=item B<v3>
|
|
|
|
Enable or disable v3 authentication (enable|disable).
|
|
|
|
=item B<-h>|B<--help>
|
|
|
|
Prints out a brief usage message.
|
|
|
|
=item B<-v>, B<--version>
|
|
|
|
Display the version number.
|
|
|
|
=back
|
|
|
|
|
|
=head1 EXAMPLES
|
|
|
|
=over 3
|
|
|
|
=item *
|
|
|
|
To turn on SNMP alerts for node5:
|
|
|
|
B<rspconfig> I<node5> B<alert>=B<on>
|
|
|
|
node5: Alerts: enabled
|
|
|
|
=item *
|
|
|
|
To display the destination setting for SNMP alerts for node4:
|
|
|
|
B<rspconfig> I<node4 snmpdest>
|
|
|
|
node4: BMC SNMP Destination 1: 9.114.47.227
|
|
|
|
=item *
|
|
|
|
To display the MPA network parameters for mm01:
|
|
|
|
B<rspconfig> I<mm01 network>
|
|
|
|
mm01: MM IP: 192.168.1.47
|
|
mm01: MM Hostname: MM001125C31F28
|
|
mm01: Gateway: 192.168.1.254
|
|
mm01: Subnet Mask: 255.255.255.224
|
|
|
|
=item *
|
|
|
|
To change the MPA network parameters with the values in the xCAT database for mm01:
|
|
|
|
B<rspconfig> I<mm01 network=*>
|
|
|
|
mm01: MM IP: 192.168.1.47
|
|
mm01: MM Hostname: mm01
|
|
mm01: Gateway: 192.168.1.254
|
|
mm01: Subnet Mask: 255.255.255.224
|
|
|
|
=item *
|
|
|
|
To change only the gateway parameter for the MPA network mm01:
|
|
|
|
B<rspconfig> I<mm01 network=,,192.168.1.1,>
|
|
|
|
mm01: Gateway: 192.168.1.1
|
|
|
|
=item *
|
|
|
|
To get the current power redundancy mode for power domain 1 on mm01:
|
|
|
|
B<rspconfig> I<mm01 pd1>
|
|
|
|
mm01: Redundant without performance impact
|
|
|
|
=item *
|
|
|
|
To change the current power redundancy mode for power domain 1 on mm01 to non-redundant:
|
|
|
|
B<rspconfig> I<mm01 pd1=nonred>
|
|
|
|
mm01: nonred
|
|
|
|
=item *
|
|
|
|
To enable NTP with an NTP server address of 192.168.1.1, an update frequency of 90 minutes, and with v3 authentication enabled on mm01:
|
|
|
|
B<rspconfig> I<mm01 ntp=enable,192.168.1.1,90,enable>
|
|
|
|
mm01: NTP: disabled
|
|
mm01: NTP Server: 192.168.1.1
|
|
mm01: NTP: 90 (minutes)
|
|
mm01: NTP: enabled
|
|
|
|
=item *
|
|
|
|
To disable NTP v3 authentication only on mm01:
|
|
|
|
B<rspconfig> I<mm01 ntp=,,,disable>
|
|
|
|
mm01: NTP v3: disabled
|
|
|
|
=item *
|
|
|
|
To disable Predictive Failure and L2 Failure deconfiguration policies on mm01:
|
|
|
|
B<rspconfig> I<mm01 decfg=disable:predictive,L3>
|
|
|
|
mm01: Success
|
|
|
|
=item *
|
|
|
|
To deconfigure processors 4 and 5 of Processing Unit 0 on mm01:
|
|
|
|
B<rspconfig> I<mm01 procedecfg=deconfigure:0:4,5>
|
|
|
|
mm01: Success
|
|
|
|
=item *
|
|
|
|
To deconfigure memory bank 9 and 10 of Processing Unit 0 on mm01:
|
|
|
|
B<rspconfig> I<mm01 memdecfg=deconfigure:bank:0:9,10>
|
|
|
|
mm01: Success
|
|
|
|
=back
|
|
|
|
|
|
=head1 SEE ALSO
|
|
|
|
noderange(3), rpower(1), rcons(1), rinv(1), rvitals(1), rscan(1)
|
|
|