xcat-core/xCAT/postscripts/syslog

258 lines
7.4 KiB
Bash
Executable File

#!/bin/sh
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
#-------------------------------------------------------------------------------
#=head1 syslog
#=head2 syslog command that setsup the syslogd for MS, SV and nodes.
# On MS, it makes sure all the xCAT messages goes to /var/log/messages file,
# it enables syslogd receving logs from remote machies.
# On MS, it sends all the messages to MS,
# it enables syslogd receving logs from remote nodes.
# On node, it sends all the messages its master.
# Input: none, it takes the following environment variables:
# OSVER: possible values are sles10, fedora8, redhat5, aix etc.
#=cut
#-------------------------------------------------------------------------------
master=$MASTER
conf_file="/etc/syslog.conf"
sysconfig="/etc/sysconfig/syslog"
init="/etc/init.d/syslog"
ng=0
isSN=0
isLinux=1
isRsyslog=0
isC3=0
config_Rsyslog_C3()
{
isReceiving=0
isLocal=$1
if [ -f /etc/xCATMN ] || [ $isSN -eq 1 ]
then
isReceiving=1
fi
if [ ! -f $2.XCATORIG ]; then
cp -f $2 $2.XCATORIG
else
cat $2 > $2.XCATORIG
fi
grep "xCAT settings" $conf_file 2>&1 1> /dev/null
if [ $? -eq 0 ]; then
sed "/# xCAT settings/,$ d" $2 >/tmp/sed.tmp
cat /tmp/sed.tmp >$2
fi
echo "# xCAT settings" >> $2
#enable to receive remote logging
if [ $isReceiving -eq 1 ]; then
sed 's/^\#\(\s\)*\$ModLoad\(\s\)*imudp.so/\$ModLoad imudp.so/' $2 >/tmp/sed.tmp
cat /tmp/sed.tmp >$2
sed 's/^\#\(\s\)*\$UDPServerRun/\$UDPServerRun/' $2 >/tmp/sed.tmp
cat /tmp/sed.tmp >$2
fi
#enable to send the logging to master
if [ $isLocal -eq 1 ]; then
touch /var/log/messages
else
sed 's/^\(\*\..*\)/\#\1/' $2 >/tmp/sed.tmp
cat /tmp/sed.tmp >$2
sed 's/^\(news\|local7\|mail\|authpriv\|cron\|kern\)\./\#\1\./' $2 >/tmp/sed.tmp
cat /tmp/sed.tmp >$2
echo "*.* @$master" >> $2
fi
}
#echo "NTYPE=$NTYPE,OSVER=$OSVER,OSTYPE=$OSTYPE"
if [[ $NTYPE = service ]]; then
isSN=1
fi
if [[ $OSTYPE = linux* ]]; then
if [[ $OSVER = fedora* ]] || [[ $OSVER = rhels5* ]] || [[ $OSVER = rhel6* ]] || [[ $OSVER = rhels6* ]] || [[ -f /etc/fedora-release ]] || [[ -f /etc/redhat-release ]]; then
if [ -e /etc/rsyslog.conf ]; then
conf_file="/etc/rsyslog.conf"
sysconfig="/etc/sysconfig/rsyslog"
init="/etc/init.d/rsyslog"
isRsyslog=1
fi
else
if [[ $OSVER = sles* ]] || [[ $OSVER = suse* ]] || [[ -f /etc/SuSE-release ]]; then
#find out which syslog is used for SLES, syslog or syslog-ng
result=`grep "^SYSLOG_DAEMON=" $sysconfig 2>&1`
if [[ $result = *syslog-ng* ]]; then
conf_file="/etc/syslog-ng/syslog-ng.conf"
ng=1
fi
fi
fi
else
sysconfig= #AIX does not have this file
isLinux=0;
fi
#echo "isSN=$isSN, isLinux=$isLinux, ng=$ng"
#echo "sysconfig=$sysconfig, confgile=$conf_file"
#handle sysconfig file to make remote loggling possible
if [ $isLinux -eq 1 ] && [ -a $sysconfig ]; then
if [[ ! -f "$sysconfig.XCATORIG" ]]; then
cp -f $sysconfig $sysconfig.XCATORIG
fi
#check if it is ryslog version 3, it has totally different settings in /etc/syslog.cong
if [ $isRsyslog -eq 1 ]; then
grep "SYSLOGD_OPTIONS" $sysconfig | grep -e "[\-c 3|\-c3|\-c4|\-c 4]" 2>&1 1> /dev/null
if [ $? -eq 0 ]; then
isC3=1
fi
fi
#no need to change anything for rsyslog version 3 for /etc/sysconf/rsyslog
if [ $isC3 -eq 0 ]; then
if [ -f /etc/xCATMN ]; then
#on MN: make the syslogd be able to receive remote logs
awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) {
if ($0 !~ /-r/) {sub(/-/, "-r -", $0)}
if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)}
print $0}
else { print $0}}' $sysconfig > $sysconfig.tmp
else
if [ $isSN -eq 1 ]; then
#on SN: make the syslog be able to receive and forward remote logs
awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) {
if ($0 !~ /-r/) {sub(/-/, "-r -", $0)}
if ($0 !~ /-h/) {sub(/-/, "-h -", $0)}
if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)}
print $0}
else { print $0}}' $sysconfig > $sysconfig.tmp
else
##turn off the time marker on all
awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) {
if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)}
print $0}
else {print $0}}' $sysconfig > $sysconfig.tmp
fi
fi
mv -f $sysconfig.tmp $sysconfig
fi
fi
#syslog-ng has different way of enabling log forwarding
if [ $ng -eq 1 ]; then
if [ $isSN -eq 1 -o -f /etc/xCATMN ]; then
if [ ! -f $conf_file.XCATORIG ]; then
cp -f $conf_file $conf_file.XCATORIG
fi
sed 's/#udp(ip("0.0.0.0/udp(ip("0.0.0.0/' $conf_file >/tmp/sed.tmp
cat /tmp/sed.tmp >$conf_file
fi
fi
#now handling where the logs go
goLocal=0;
if [ -f /etc/xCATMN ]; then
goLocal=1
else
if [ $isSN -eq 1 ]; then
if [[ $SVLOGLOCAL -eq 1 ]]; then
goLocal=1
fi
fi
fi
if [ $isC3 -eq 1 ]; then
config_Rsyslog_C3 $goLocal $conf_file
else
if [ $goLocal -eq 1 ]; then
#making sure all the messages goes to /var/log/messages
touch /var/log/messages
if [ $ng -eq 0 ]; then
if [ ! -f $conf_file.XCATORIG ]; then
cp -f $conf_file $conf_file.XCATORIG
fi
grep "xCAT settings" $conf_file 2>&1 1> /dev/null
if [ $? -eq 0 ]; then
sed "/# xCAT settings/,$ d" $conf_file >/tmp/sed.tmp
cat /tmp/sed.tmp >$conf_file
fi
if [ $isLinux -eq 0 ]; then # aix
echo "# xCAT settings" >> $conf_file
echo "*.debug /var/log/messages rotate 1024K files 5" >> $conf_file
fi
fi
else
#now make the syslogd fowarding the messages to the the master
if [ $ng -eq 1 ]; then
if [ ! -f $conf_file.XCATORIG ]; then
cp -f $conf_file $conf_file.XCATORIG
fi
grep "xCAT settings" $conf_file 2>&1 1> /dev/null
if [ $? -eq 0 ]; then
sed "/# xCAT settings/,$ d" $conf_file >/tmp/sed.tmp
cat /tmp/sed.tmp >$conf_file
fi
echo "# xCAT settings" >> $conf_file
echo "destination loghost { udp(\"$master\"); };" >> $conf_file
echo 'log { source(src); destination(loghost); };' >> $conf_file
else
if [ -f $conf_file.XCATORIG ]; then
rm -f $conf_file
else
mv -f $conf_file $conf_file.XCATORIG
fi
echo "# xCAT settings" > $conf_file
if [ $isLinux -eq 0 ]; then
echo "*.debug @$master" >> $conf_file
else
echo "*.* @$master" >> $conf_file
fi
fi
fi
fi
#restart the syslog daemon to take the new conf file settings
if [ $isLinux -eq 0 ]; then
PARSE_SRC_STATE="-e1d;s/.* \([a-zA-Z0-9]*\)$/\1/"
state=$(LC_ALL=C lssrc -s syslogd | LC_ALL=C sed "$PARSE_SRC_STATE")
if [[ -n "$state" && "$state" = "active" ]];then
stopsrc -s syslogd
fi
#wait for syslogd to fully started
RETRY_LIMIT=30 # number of 2 second retry intervals (60 second total)
let i=$RETRY_LIMIT
while :
do
ret=`LC_ALL=C startsrc -s syslogd 2>&1`
if [[ $ret == *PID* ]];then
break
fi
i=$((i - 1))
if (( i > 0 ));then
sleep 2
else
break
fi
done
else
$init restart
fi
#keep a record
logger -t xCAT "Install: syslog setup"
exit 0