28c39af34d
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@10482 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
101 lines
2.1 KiB
Plaintext
101 lines
2.1 KiB
Plaintext
|
|
=head1 NAME
|
|
|
|
B<rbootseq> - Persistently sets the order of boot devices for BladeCenter blades or PPC LPARs using Direct FSP Management (DFM).
|
|
|
|
=head1 SYNOPSIS
|
|
|
|
B<rbootseq> [B<-h>|B<--help>|B<-v>|B<--version>]
|
|
|
|
=head2 Blade specific:
|
|
|
|
B<rbootseq> I<noderange> {B<hd0>|B<hd1>|B<hd2>|B<hd3>|B<net>|B<iscsi>|B<iscsicrit>|B<cdrom>|B<usbflash>|B<floppy>|B<none>|B<list>|B<stat>}B<,>I<...>
|
|
|
|
=head2 PPC (using Direct FSP Management) specific:
|
|
|
|
B<rbootseq> I<noderange> B<[hfi|net]>
|
|
|
|
=head1 DESCRIPTION
|
|
|
|
For Blade specific:
|
|
|
|
B<rbootseq> sets the boot sequence (the order in which boot devices should be tried) for the specified blades.
|
|
Up to four different medium/devices can be listed, separated by commas. The boot sequence will remain
|
|
in effect for these blades until set differently.
|
|
|
|
For PPC (using Direct FSP Management) specific:
|
|
|
|
B<rbootseq> sets the net or hfi device as the first boot device for the specified PPC LPARs. The net or hfi mac address is stored in the mac table. And B<rbootseq> requires that the network information is correct in networks table as for getmacs/rnetboot.
|
|
|
|
=head1 OPTIONS
|
|
|
|
=over 7
|
|
|
|
=item B<hd0>|B<harddisk0>|B<hd>|B<harddisk>
|
|
|
|
The first hard disk.
|
|
|
|
=item B<hd1>|B<harddisk1>
|
|
|
|
The second hard disk.
|
|
|
|
=item B<hd2>|B<harddisk2>
|
|
|
|
The third hard disk.
|
|
|
|
=item B<hd3>|B<harddisk3>
|
|
|
|
The fourth hard disk.
|
|
|
|
=item B<n>|B<net>|B<network>
|
|
|
|
Boot over the network, using a PXE or BOOTP broadcast.
|
|
|
|
=item B<iscsi>
|
|
|
|
Boot to an iSCSI disk over the network.
|
|
|
|
=item B<iscsicrit>
|
|
|
|
??
|
|
|
|
=item B<cd>|B<cdrom>
|
|
|
|
The CD or DVD drive.
|
|
|
|
=item B<usbflas>|B<usb>|B<flash>
|
|
|
|
A USB flash drive.
|
|
|
|
=item B<floppy>
|
|
|
|
The floppy drive.
|
|
|
|
=item B<none>
|
|
|
|
If it gets to this part of the sequence, do not boot. Can not be specified 1st, or before any real boot devices.
|
|
|
|
=item B<list>|B<stat>
|
|
|
|
Display the current boot sequence.
|
|
|
|
=back
|
|
|
|
=head1 EXAMPLES
|
|
|
|
=over 3
|
|
|
|
=item 1.
|
|
|
|
Set blades 14-56 and 70-203 to try to boot first from the CD drive, then the floppy drive, then
|
|
the network, and finally from the 1st hard disk:
|
|
|
|
rbootseq blade[14-56],blade[70-203] c,f,n,hd0
|
|
|
|
=back
|
|
|
|
=head1 SEE ALSO
|
|
|
|
L<rsetboot(1)|rsetboot.1>
|
|
|