3277 lines
106 KiB
Perl
3277 lines
106 KiB
Perl
#!/usr/bin/env perl
|
|
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
|
|
#
|
|
|
|
package xCAT::LparNetbootExp;
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
=head1 LparNetbootExp
|
|
Usage: Install partition
|
|
lpar_netboot [-v] [-x] [-f] [-w set_boot_order] [-A -D | [-D] | [-D] -m macaddress] -t ent -s speed -d duplex
|
|
-S server -G gateway -C client hostname profile managed_system lparid remote_host
|
|
|
|
Usage: Return macaddress
|
|
lpar_netboot -M -n [-v] -t ent [-f] [-x] [-D -s speed -d duplex -S server -G gateway -C client] hostname profile managed_system lparid remote_host
|
|
|
|
-n Do not boot partition
|
|
-t Specifies network type ent
|
|
-D Perform ping test, use adapter that successfully ping the server
|
|
-s Network adapter speed
|
|
-d Network adapter duplex
|
|
-S Server IP address
|
|
-G Gateway IP address
|
|
-C Client IP address
|
|
-m MAC Address
|
|
-v Verbose output
|
|
-x Debug output
|
|
-f Force close virtual terminal session
|
|
-w Set boot device order
|
|
0: Don't set boot device order
|
|
1: Set network as boot device
|
|
2: Set network as 1st boot device, disk as 2nd boot device
|
|
3: Set disk as 1st boot device, network as 2nd boot device
|
|
4: set disk as boot device
|
|
-M Discovery ethernet adapter mac address and location code
|
|
--help Prints this help
|
|
|
|
|
|
=cut
|
|
|
|
BEGIN
|
|
{
|
|
$::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : '/opt/xcat';
|
|
$::XCATDIR = $ENV{'XCATDIR'} ? $ENV{'XCATDIR'} : '/etc/xcat';
|
|
}
|
|
|
|
|
|
use lib "$::XCATROOT/lib/perl";
|
|
use xCAT::Utils;
|
|
use Getopt::Long;
|
|
use xCAT::MsgUtils;
|
|
use Expect;
|
|
use strict;
|
|
use Data::Dumper;
|
|
my $adapter_found = 0;
|
|
my @adap_type;
|
|
my @full_path_name_array;
|
|
my @phandle_array;
|
|
my $macaddress;
|
|
my $phys_loc;
|
|
my $client_ip;
|
|
my $gateway_ip;
|
|
my $device_type;
|
|
my $server_ip;
|
|
|
|
# List supported network adapters here. dev_pat is an array of regexp patterns
|
|
# the script searches for in the device tree listing. dev_type is the type
|
|
# of device displayed in the output.
|
|
my @dev_pat = (
|
|
"ethernet",
|
|
"token-ring",
|
|
"fddi"
|
|
);
|
|
my @dev_type = (
|
|
"ent",
|
|
"tok",
|
|
"fddi"
|
|
);
|
|
my $dev_count = scalar(@dev_type); #number of supported device type
|
|
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 nc_msg
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to write status/error messages
|
|
We do it this way so that if /var is full (or some other error occurs)
|
|
we can trap it in a common section of code.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
sub nc_msg
|
|
{
|
|
my $verbose = shift;
|
|
my $msg = shift;
|
|
my $rsp;
|
|
|
|
if ( $verbose eq 1 ) {
|
|
$rsp->{data}->[0] = $msg;
|
|
xCAT::MsgUtils->message("I", $rsp ,$::CALLBACK);
|
|
}
|
|
|
|
if ( $verbose eq 2 ) {
|
|
$rsp->{data}->[0] = $msg;
|
|
xCAT::MsgUtils->message("E", $rsp ,$::CALLBACK);
|
|
}
|
|
}
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 run_lssyscfg
|
|
|
|
Procedure to run the rpower command
|
|
test its return code and capture its output
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
sub run_lssyscfg
|
|
{
|
|
my $req = shift;
|
|
if (($req) && ($req =~ /xCAT::/))
|
|
{
|
|
$req = shift;
|
|
}
|
|
my $verbose = shift;
|
|
my $node = shift;
|
|
my $cmd;
|
|
my $out;
|
|
|
|
$out = xCAT::Utils->runxcmd(
|
|
{
|
|
command => ['rpower'],
|
|
node => [$node],
|
|
arg => ['state']
|
|
},
|
|
$req, 0, 1);
|
|
if ($::RUNCMD_RC != 0) {
|
|
nc_msg($verbose, "Unable to run rpower $node state.\n");
|
|
return undef;
|
|
}
|
|
my $output = join ',', @$out;
|
|
nc_msg($verbose, "Status: run_lssyscg : partition status : $output\n");
|
|
|
|
nc_msg($verbose, "####msg:$output#########\n" );
|
|
|
|
|
|
###################################################################
|
|
# Slow down the requests speed to hcp, so that hcp will not busy on
|
|
# query. Instead, hcp should put more time on other activities.
|
|
# Another reason to set this sleep is giving some time to the lpars
|
|
# to be more stable.
|
|
###################################################################
|
|
sleep 4;
|
|
|
|
return $output;
|
|
}
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 usage
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to write usage message and exit
|
|
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
sub usage {
|
|
|
|
my $msg = "Usage: Install partition \
|
|
\n\t \[-v\] \[-x\] \[-f\] \[-w set_boot_order\] \[-A -D | \[-D\] | \[-D\] -m macaddress\] -t ent -s speed -d duplex \
|
|
\n\t\t-S server -G gateway -C client hostname profile managed_system lparid remote_host\
|
|
\n \
|
|
\nUsage: Return macaddress \
|
|
\n\t -M -n \[-v\] -t ent \[-f] \[-x] \[-D -s speed -d duplex -S server -G gateway -C client\] hostname profile managed_system lparid remote_host\
|
|
\n \
|
|
\n\t-n\tDo not boot partition \
|
|
\n\t-t\tSpecifies network type ent \
|
|
\n\t-D\tPerform ping test, use adapter that successfully ping the server \
|
|
\n\t-s\tNetwork adapter speed \
|
|
\n\t-d\tNetwork adapter duplex \
|
|
\n\t-S\tServer IP address \
|
|
\n\t-G\tGateway IP address \
|
|
\n\t-C\tClient IP address \
|
|
\n\t-m\tMAC Address \
|
|
\n\t-v\tVerbose output \
|
|
\n\t-x\tDebug output \
|
|
\n\t-f\tForce close virtual terminal session \
|
|
\n\t-w\tSet boot device order \
|
|
\n\t\t\t0: Don't set boot device order \
|
|
\n\t\t\t1: Set network as boot device \
|
|
\n\t\t\t2: Set network as 1st boot device, disk as 2nd boot device \
|
|
\n\t\t\t3: Set disk as 1st boot device, network as 2nd boot device \
|
|
\n\t\t\t4: set disk as boot device \
|
|
\n\t-M\tDiscovery ethernet adapter mac address and location code \
|
|
\n\t--help\tPrints this help\n";
|
|
nc_msg(1, $msg);
|
|
|
|
return 0;
|
|
}
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 ck_args
|
|
|
|
PROCEDURE
|
|
|
|
Check command line arguments
|
|
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub ck_args {
|
|
|
|
my $opt = shift;
|
|
if (($opt) && ($opt =~ /xCAT::/))
|
|
{
|
|
$opt = shift;
|
|
}
|
|
my $verbose = shift;
|
|
my $node = $opt->{node};
|
|
my $mtms = $opt->{fsp};
|
|
my $hcp = $opt->{hcp};
|
|
my $lparid = $opt->{id};
|
|
my $profile = $opt->{pprofile};
|
|
|
|
if (exists( $opt->{D}) and (!exists ($opt->{s}) or !exists ($opt->{d} ))) {
|
|
nc_msg($verbose, "Speed and duplex required\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if (exists ($opt->{D}) and !exists ($opt->{C})) {
|
|
nc_msg($verbose, "Client IP is required\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
if (exists( $opt->{D}) and !exists($opt->{S})) {
|
|
nc_msg($verbose, "Server IP is required\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if (exists( $opt->{D}) and !exists($opt->{G})) {
|
|
nc_msg($verbose, "Gateway IP is required\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
unless($node) {
|
|
nc_msg($verbose, "Node is required\n");
|
|
usage;
|
|
return 1;
|
|
} else {
|
|
nc_msg($verbose, "Node is $node\n");
|
|
}
|
|
|
|
unless($mtms) {
|
|
nc_msg($verbose, "Managed system is required\n");
|
|
usage;
|
|
return 1;
|
|
} else {
|
|
nc_msg($verbose, "Managed system is $mtms.\n");
|
|
}
|
|
|
|
unless ($hcp) {
|
|
nc_msg($verbose, "Hardware control point address is required\n");
|
|
usage;
|
|
return 1;
|
|
} else {
|
|
nc_msg($verbose, "Hardware control point address is $hcp.\n");
|
|
}
|
|
|
|
unless ($lparid) {
|
|
nc_msg($verbose, "Lpar Id is required.\n");
|
|
usage;
|
|
return 1;
|
|
} else {
|
|
nc_msg($verbose, "LPAR Id is $lparid.\n");
|
|
}
|
|
|
|
unless ($profile) {
|
|
nc_msg($verbose, "Profile is required.\n");
|
|
usage;
|
|
return 1;
|
|
} else {
|
|
nc_msg($verbose, "profile $profile.\n");
|
|
}
|
|
|
|
if ($opt->{M} and $opt->{g}) {
|
|
nc_msg($verbose, "Can not specify -M and -g flags together.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
if ($opt->{M} and ($opt->{m} or $opt->{l})) {
|
|
nc_msg($verbose, "Can not specify -M and -l or -m flags together.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{m} and $opt->{l}) {
|
|
nc_msg($verbose, "Can not specify -l and -m flags together.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{A} and ($opt->{m} or $opt->{l})) {
|
|
nc_msg($verbose, "Can not specify -A and -m or -l flags together.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{A} and !exists($opt->{D}) and !exists($opt->{n})) {
|
|
nc_msg($verbose, "Flag -A must be specify with flag -D for booting.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{M} and $opt->{D} and (!exists($opt->{S}) or !exists($opt->{G}) or !exists($opt->{C}) or !exists( $opt->{s}) or !exists($opt->{d}))) {
|
|
nc_msg($verbose, "Flag -M with -D require arguments for -C, -S, -G, -s and -d.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{M} and !exists($opt->{D}) and (!exists($opt->{S}) or !exists($opt->{G}) or !exists($opt->{C}) or !exists($opt->{s}) or !exists($opt->{d}))){
|
|
nc_msg($verbose, "Flag -M with arguments for -C, -S, -G, -s and -d require -D flag.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($opt->{M} and !exists($opt->{n})) {
|
|
nc_msg($verbose, "-M flag requires -n.\n");
|
|
usage;
|
|
return 1;
|
|
}
|
|
|
|
if ($node =~ /(\[ ]+)-/) {
|
|
nc_msg($verbose, "Error : $node, node is required\n");
|
|
return 1;
|
|
}
|
|
|
|
if ($mtms =~ /(\[ ]+)-/) {
|
|
nc_msg($verbose, "Error : $mtms, Managed system is required\n");
|
|
return 1;
|
|
}
|
|
|
|
#if ($profile =~ /(\[ ]+)-/) {
|
|
# nc_msg($verbose, "Error : $profile, profile is required\n");
|
|
# return 1;
|
|
#}
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 send_command
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to send commands slowly. This is needed because
|
|
some bytes are missed by the service processor when sent at top speed.
|
|
The sleep was needed because a command was sent sometimes before the
|
|
results of the previous command had been received.
|
|
|
|
The Open Firmware is constrained on how quickly it can process input streams.
|
|
The following code causes expect to send 10 characters and then wait 1 second
|
|
before sending another 10 bytes.
|
|
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
sub send_command {
|
|
my $verbose = shift;
|
|
my $rconsole = shift;
|
|
my $cmd = shift;
|
|
nc_msg($verbose, "sending commands $cmd to expect \n");
|
|
my $msg;
|
|
|
|
$msg = $rconsole->send($cmd);
|
|
sleep 1;
|
|
return $msg;
|
|
|
|
}
|
|
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 get_phandle
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to parse the full device tree that is displayed as a result
|
|
of an ls command. The information needed is the phandle and full device name
|
|
of a supported network card found in the device tree. The phandle is used in
|
|
other procedures to get and change properties of the network card. The full
|
|
device name is used to network boot from the network adapter.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
sub get_phandle {
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $timeout = 30;
|
|
my $done = 0;
|
|
my @result;
|
|
my $expect_out;
|
|
my $retry_count;
|
|
my %path;
|
|
my $rc = 0;
|
|
|
|
|
|
# This is the first procedure entered after getting to the ok prompt. On entry
|
|
# the current device is not root. The command 'dev /' is sent to get to the
|
|
# root of the device tree. There is no output from the dev command. The expected
|
|
# output is the ok prompt ('>').
|
|
#
|
|
# The pwd command can be used to determine what the current device is.
|
|
#
|
|
|
|
send_command($verbose, $rconsole, "dev /\r");
|
|
|
|
@result = $rconsole->expect(
|
|
$timeout,
|
|
[qr/ok/=>
|
|
sub {
|
|
nc_msg($verbose, "Status: at root\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout =>
|
|
sub {
|
|
$rconsole->send("\r");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return 1 if ($rc eq 1);
|
|
# Next, the 'ls' command is sent. The result is a display of the entire
|
|
# device tree. The code then looks at the
|
|
# output from the ls command one line at a time, trying to match it with the
|
|
# regexp pattern in dev_pat, an array that contains all the supported network
|
|
# adapters. When found, the adapter type, the phandle and path name are saved
|
|
# in array variables.
|
|
#
|
|
# The complicated part is that the full path name may be spread over more than
|
|
# one line. Each line contains information about a node. If the supported
|
|
# network adapter is found on an nth level node, the full path name is the
|
|
# concatenation of the node information from the 0th level to the nth level.
|
|
# Hence, the path name from each level of the device tree needs to be saved.
|
|
#
|
|
# The pattern "\n(\[^\r]*)\r" is worth a second look. It took
|
|
# many hours of debug and reading the expect book to get it right. When more
|
|
# than one line of data is returned to expect at once, it is tricky getting
|
|
# exactly one line of data to look at. This pattern works because it looks
|
|
# for a newline(\n), any character other than a carriage return(\[^\r]*), and
|
|
# then for a carriage return. This causes expect to match a single line.
|
|
# If (.*) is used instead of (\[^\r]*), multiple lines are matched. (that was
|
|
# attempt number 1)
|
|
#
|
|
# Once a single line is found, it tries to determine what level in the device
|
|
# tree this line is.
|
|
# searching through subsequent lines and subsequent levels until an
|
|
# adapter is found.
|
|
# The level of the current line, which
|
|
# is calculated based on the assumption of "Level = (Leading Spaces - 1)/2".
|
|
# Leading Spaces is the number of spaces between the first colon ':' and the
|
|
# first non-space character of each line.
|
|
#
|
|
# Using the -d flag helped a lot in finding the correct pattern.
|
|
#
|
|
|
|
send_command($verbose, $rconsole, "ls \r");
|
|
|
|
$timeout = 60;
|
|
$done = 0;
|
|
while (!$done) {
|
|
# this expect call isolates single lines
|
|
# This code uses the tcl regexp to parse the single line
|
|
# isolated by expect.
|
|
#
|
|
# When the ok prompt ('>') is matched, this indicates the end of
|
|
# the ls output, at which point the done variable is set, to break
|
|
# out of the loop.
|
|
#
|
|
# All other lines are ignored.
|
|
#
|
|
@result = ();
|
|
@result = $rconsole->expect(
|
|
$timeout,
|
|
[qr/(\n)([^\r]*)(\r)/=>
|
|
sub {
|
|
nc_msg($verbose, "Parsing network adapters... \n");
|
|
#$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[qr/>/=>
|
|
sub {
|
|
nc_msg($verbose, "finished \n");
|
|
$rconsole->clear_accum();
|
|
$done = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout isolating single line of ls output\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return 1 if ($rc eq 1);
|
|
if ($result[2] =~ /(\w*)\:(\s*)\/(\S*)/) {
|
|
|
|
my $x1 = $1;
|
|
my $x2 = $2; #number of space
|
|
my $x3 = $3; #device
|
|
# Each level is inspected for a match
|
|
my $level = (length($x2)-1)/2;
|
|
$path{$level} = $x3;
|
|
my $j = 0;
|
|
|
|
for ($j = 0; $j < $dev_count; $j++) {
|
|
if ($x3 =~ /$dev_pat[$j]/) {
|
|
if ( $x3 =~ /hfi-ethernet/ and $dev_pat[$j] eq "ethernet" ){
|
|
next;
|
|
}
|
|
my $i = 0;
|
|
for ($i = 0; $i <= $level; $i++)
|
|
{
|
|
$full_path_name_array[$adapter_found] .= "/" . $path{$i};
|
|
}
|
|
$phandle_array[$adapter_found] = $x1;
|
|
$adap_type[$adapter_found] = $dev_type[$j];
|
|
$adapter_found ++;
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
# Did we find one or more adapters?
|
|
if ( $adapter_found > 0 ) {
|
|
return 0;
|
|
} else {
|
|
nc_msg($verbose, "No network adapters found\n" );
|
|
return 1;
|
|
}
|
|
|
|
}
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 get_adap_prop
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to obtain the list of valid adapter connector properties
|
|
from the adapter card. Connector types can be rj45, sc, 9pin, aui,
|
|
bnc, or mic. Speeds can be 10, 100, or 1000. Duplex can be half or
|
|
full. This procedure will use the "supported-network-types"
|
|
argument to the get-package-property command to get the list of
|
|
properties for the given adapter.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub get_adap_prop {
|
|
my $phandle = shift;
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $timeout = 120;
|
|
my $rc = 0;
|
|
my $state = 0;
|
|
my @cmd;
|
|
my @done;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my @result;
|
|
my @adap_prop_array;
|
|
my $nw_type;
|
|
my $nw_speed;
|
|
my $nw_conn;
|
|
my $nw_duplex;
|
|
|
|
nc_msg($verbose, " Status: get_adap_prop start\n");
|
|
|
|
# state 0, stack count 0
|
|
$done[0] = 0;
|
|
$cmd[0] = "\" supported-network-types\" " . $phandle . " get-package-property\r";
|
|
$msg[0] = "Status: rc and all supported network types now on stack\n";
|
|
#$pattern[0] = "(.*)3 >(.*)";
|
|
$pattern[0] = "3 >";
|
|
$newstate[0] = 1;
|
|
|
|
# state 1, return code and string on stack
|
|
$done[1] = 0;
|
|
$cmd[1] = ".\r";
|
|
$msg[1] = "Status: All supported network types now on stack\n";
|
|
#$pattern[1] = "(.*)2 >(.*)";
|
|
$pattern[1] = "2 >";
|
|
$newstate[1] = 2;
|
|
|
|
# state 2, data ready to decode
|
|
$done[2] = 0;
|
|
$cmd[2] = "decode-string\r";
|
|
$msg[2] = "Status: supported network type isolated on stack\n";
|
|
#$pattern[2] = "(.*)ok(.*)4 >(.*)";
|
|
$pattern[2] = "4 >";
|
|
$newstate[2] = 3;
|
|
|
|
# state 3, decoded string on stack
|
|
$done[3]= 0;
|
|
$cmd[3] = "dump\r";
|
|
$msg[3] = "Status: supported network type off stack\n";
|
|
#$pattern[3] = ".*:.*:(.*):.*:.*:(.*):.*(2 >)(.*)";
|
|
$pattern[3] = "ok";
|
|
$newstate[3] = 4;
|
|
|
|
# state 4, need to check for more data to decode
|
|
$done[4] = 0;
|
|
$cmd[4] = ".s\r";
|
|
$msg[4] = "Status: checking for more supported network types\n";
|
|
#$pattern[4] = ".s (\[0-9a-f]* )(.*)>";
|
|
$pattern[4] = "ok";
|
|
$newstate[4]= 5;
|
|
|
|
# state 5, done decoding string, clear stack
|
|
$done[5] = 0;
|
|
$cmd[5] = ".\r";
|
|
$msg[5] = "Status: one entry on stack cleared\n";
|
|
#$pattern[5] = "(.*)ok(.*)1 >(.*)";
|
|
$pattern[5] = "ok";
|
|
$newstate[5] = 6;
|
|
|
|
# state 6, finish clearing stack, choose correct adapter type
|
|
$done[6]= 0;
|
|
$cmd[6] = ".\r";
|
|
$msg[6] = "Status: finished clearing stack\n";
|
|
#$pattern[6] = "(.*)ok(.*)0 >(.*)";
|
|
$pattern[6] = "ok";
|
|
$newstate[6]= 7;
|
|
|
|
# state 7, done
|
|
$done[7] = 1;
|
|
|
|
while($done[$state] eq 0) {
|
|
nc_msg($verbose, "Status: command is $cmd[$state]\n");
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
@result = ();
|
|
@result = $rconsole->expect(
|
|
$timeout,
|
|
[ qr/$pattern[$state]/i,
|
|
sub {
|
|
nc_msg($verbose, $msg[$state]);
|
|
$state = $newstate[$state];
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[ qr/]/,
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ qr/(.*)DEFAULT(.*)/,
|
|
sub {
|
|
nc_msg($verbose, " Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout in getting adapter properpties\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
]
|
|
);
|
|
return 1 if ($rc eq 1);
|
|
# After state 3, the network type is parsed and the connector
|
|
# type extracted. If the type hasn't been found, add it to
|
|
# the list of supported connector types.
|
|
if ( $state eq 4 ) {
|
|
# Build the adapter properties from the string
|
|
#regexp .*,(.*),(.*),(.*) $nw_type dummy nw_speed nw_conn nw_duplex
|
|
#set adap_prop "$nw_speed,$nw_conn,$nw_duplex"
|
|
#nc_msg "Status: Adapter properties are $adap_prop\n"
|
|
|
|
# if it's not in the list, add it, otherwise continue
|
|
if ( $result[3] =~ /(\w*):(.*):(\w*)\,(\w*)\,(\w*):/) {
|
|
$nw_type = $3;
|
|
$nw_speed = $4;
|
|
$nw_conn = $5;
|
|
nc_msg($verbose, "nwtype is $3, nwspeed is $4, nwconn is $5\n");
|
|
}
|
|
if ( $result[3] =~ /(\w*):(.*):(\w*)\,(\w*):/) {
|
|
$nw_duplex = $4;
|
|
nc_msg($verbose, "nwduplex is $4\n");
|
|
}
|
|
}
|
|
|
|
#push @adap_prop_array, $nw_type.",".$nw_speed.",".$nw_conn.",".$nw_duplex;
|
|
push @adap_prop_array, $nw_speed.",".$nw_conn.",".$nw_duplex;
|
|
nc_msg($verbose, "Status: Adding adapter properties to list\n");
|
|
|
|
# After state 4, a test is done to see if all of the supported
|
|
# network types have been decoded. If they have been, the
|
|
# state variable is left alone. if not, the state variable is
|
|
# set to 2, causing a loop back to the step where the
|
|
# decode-string command is sent.
|
|
if ( $state eq 5 ) {
|
|
if ($result[3] =~/2 > \.s \w+ (\w*)/) {
|
|
$state = 2 if ($1 != 0);
|
|
}
|
|
}
|
|
}
|
|
if (scalar(@adap_prop_array) != 0) {
|
|
return \@adap_prop_array;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 get_mac_addr
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to obtain the ethernet or mac address property from the
|
|
ethernet card.
|
|
|
|
3 commands lines containing a total of 6 commands are used.
|
|
|
|
The get-package-property command is an example of a command
|
|
that takes it's arguments off the stack and puts the results back onto the
|
|
stack. Because of this, the arguments for the get-package-property command
|
|
are in front of the command verb.
|
|
|
|
|
|
The only reason this procedure is implemented in a loop is to avoid coding
|
|
3 expect commands.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub get_mac_addr {
|
|
my $phandle = shift;
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $timeout = 60;
|
|
my $state = 0;
|
|
my @result;
|
|
my $mac_rc;
|
|
my @cmd;
|
|
my @done;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my $mac_address;
|
|
my $rc = 0;
|
|
|
|
|
|
nc_msg($verbose, "Status: get_mac_addr start\n");
|
|
|
|
# cmd(0) could have been sent as 3 commands. " mac-address" (tcl forces
|
|
# the use of \") is the first command on this line. The result of entering
|
|
# " mac-address" is that 2 stack entries are created, and address and a length.
|
|
#
|
|
# The next command in cmd(0) is the phandle with no quotes. This results in
|
|
# one stack entry because the phandle is an address.
|
|
#
|
|
# the third command in cmd(0) is get-package-property. After this command, there
|
|
# are 3 stack entries (return code, address and length of mac-address).
|
|
# state 0, stack count 0, send command
|
|
$done[0] = 0;
|
|
$cmd[0] = "\" local-mac-address\" ". $phandle . " get-package-property\r";
|
|
$msg[0] = "Status: return code and mac-address now on stack\n";
|
|
$pattern[0] = "local-mac-address.*ok";#"\s*3 >";
|
|
$newstate[0] = 1;
|
|
|
|
# cmd(1) is a dot (.). This is a stack manipulation command that removes one
|
|
# thing from the stack. pattern(1) is looking for a prompt with the 2 indicating
|
|
# that there are 2 things left on the stack.
|
|
# state 1, return code and mac-address on stack
|
|
$done[1]= 0;
|
|
$cmd[1] = ".\r";
|
|
$msg[1] = "Status: mac-address now on stack\n";
|
|
#$pattern[1] = "(.*)2 >(.*)";
|
|
$pattern[1] = "ok"; #"2 >";
|
|
$newstate[1]= 2;
|
|
|
|
# cmd(2) is the dump command. This takes an address and a length off the stack
|
|
# and displays the contents of that storage in ascii and hex. The long pattern
|
|
# puts the hex into the variable expect_out(3,string). The tcl verb 'join' is
|
|
# used to eliminate the spaces put in by the dump command.
|
|
# state 2, mac-address on stack
|
|
$done[2] = 0;
|
|
$cmd[2] = ": dump-mac ( prop-addr prop-len -- ) \
|
|
cr \
|
|
dup decode-bytes 2swap 2drop ( data-addr data-len ) \
|
|
( data-len ) 0 ?do \
|
|
dup c@ 2 u.r ( data-addr ) \
|
|
char+ ( data-addr' ) \
|
|
loop \
|
|
drop \
|
|
cr \
|
|
; \r";
|
|
$msg[2] = "Status: set command\n";
|
|
$pattern[2] = "ok";
|
|
$newstate[2]= 3;
|
|
|
|
$done[3]= 0;
|
|
$cmd[3] = "dump-mac\r";
|
|
$msg[3] = "Status: mac-address displayed, stack empty\n";
|
|
$pattern[3] = "dump-mac(\\s*)(\\w*)(\\s*)ok";
|
|
$newstate[3] = 4 ;
|
|
|
|
|
|
# state 4, all done
|
|
$done[4] = 1;
|
|
|
|
while($done[$state] eq 0) {
|
|
@result = ();
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
@result = $rconsole->expect(
|
|
$timeout,
|
|
[qr/$pattern[$state]/=>
|
|
sub {
|
|
nc_msg($verbose, $msg[$state]);
|
|
$state = $newstate[$state];
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[qr/1 > /=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
if( $state eq 0 ) {
|
|
# An error occurred while obtaining the mac address. Log the error,
|
|
# but don't quit nodecond. instead, return NA for the address
|
|
#
|
|
send_command($verbose, $rconsole, ".\r");
|
|
$rconsole->expect(
|
|
$timeout,
|
|
#[ qr/(-*\[0-9\]*) ok(.*)0 >(.*)/i,
|
|
[ qr/0 >/i,
|
|
sub {
|
|
#$mac_rc = $expect_out;
|
|
nc_msg($verbose, "Status: Error getting MAC address for phandle=$phandle. RC=$mac_rc.\n");
|
|
nc_msg($verbose, "Could not obtain MAC address; setting MAX to NA\n" );
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout when getting mac address\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ eof =>
|
|
sub {
|
|
nc_msg($verbose, " Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
]
|
|
);
|
|
}
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout in getting mac address\n");
|
|
nc_msg($verbose, "timeout state is $state\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return undef if ($rc eq 1);
|
|
}
|
|
# if the state is 0, 1, or 2, an error occurred and the join will fail
|
|
if ($state eq 4) {
|
|
if ($result[2] =~ /dump-mac\s*(\w*)\s*ok/) {
|
|
$mac_address = $1;
|
|
}
|
|
return $mac_address;
|
|
} else {
|
|
return undef;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 get_adaptr_loc
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to obtain the list of ethernet adapters, their physical
|
|
location codes and MAC addresses.
|
|
|
|
The get-package-property command is an example of a command
|
|
that takes it's arguments off the stack and puts the results back onto the
|
|
stack. Because of this, the arguments for the get-package-property command
|
|
are in front of the command verb.
|
|
|
|
The only reason this procedure is implemented in a loop is to avoid coding
|
|
3 expect commands.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub get_adaptr_loc {
|
|
my $phandle = shift;
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my @cmd;
|
|
my @done;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my $state = 0;
|
|
my $timeout = 60; # shouldn't take long
|
|
my @result;
|
|
my @path;
|
|
my $loc_code;
|
|
my $rc = 0;
|
|
|
|
nc_msg($verbose, "Status: get_adaptr_loc start\n");
|
|
# cmd(0) could have been sent as 3 commands. " ibm,loc-code" (tcl forces
|
|
# the use of \") is the first command on this line. The result of entering
|
|
# " ibm,loc-code" is that 2 stack entries are created, and address and a length.
|
|
#
|
|
# The next command in cmd(0) is the phandle with no quotes. This results in
|
|
# one stack entry because the phandle is an address.
|
|
#
|
|
# the third command in cmd(0) is get-package-property. After this command, there
|
|
# are 3 stack entries (return code, address and length of mac-address).
|
|
# state 0, stack count 0, send command
|
|
$done[0] = 0;
|
|
$cmd[0] = "\" ibm,loc-code\" $phandle get-package-property\r";
|
|
$msg[0] = "Status: return code and loc-code now on stack\n";
|
|
#$pattern[0] = "(.*)3 >(.*)";
|
|
$pattern[0] = "3 >";
|
|
$newstate[0] = 1;
|
|
|
|
# cmd(1) is a dot (.). This is a stack manipulation command that removes one
|
|
# thing from the stack. pattern(1) is looking for a prompt with the 2 indicating
|
|
# that there are 2 things left on the stack.
|
|
# state 1, return code and loc-code on stack
|
|
$done[1]= 0;
|
|
$cmd[1] = ".\r";
|
|
$msg[1] = "Status: loc-code now on stack\n";
|
|
#$pattern[1] = "(.*)2 >(.*)";
|
|
$pattern[1] = "ok"; #"2 >";
|
|
$newstate[1]= 2;
|
|
|
|
# state 2, loc-code on stack
|
|
$done[2]= 0;
|
|
$cmd[2] = "dump\r";
|
|
$msg[2] = "Status: loc-code displayed, stack empty\n";
|
|
#$pattern[2] = "(.*)(: )(.*)( :)(.*)(\.: ok)";
|
|
$pattern[2] = "ok";
|
|
$newstate[2]= 3;
|
|
|
|
# state 3, all done
|
|
$done[3] = 1;
|
|
|
|
while($done[$state] eq 0) {
|
|
@result = ();
|
|
nc_msg($verbose, "PROGRAM Status: command is $cmd[$state]\n");
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
@result = $rconsole->expect(
|
|
$timeout,
|
|
[qr/$pattern[$state]/=>
|
|
sub {
|
|
nc_msg($verbose, $msg[$state]);
|
|
$rconsole->clear_accum();
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
[qr/1 >/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
my $exp = shift;
|
|
if($state eq 0) {
|
|
send_command($verbose, $rconsole, ".\r");
|
|
$exp->expect(
|
|
#[qr/(-*\[0-9\]*) ok(.*)0 >(.*)/=>
|
|
[qr/0 >/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
my $loc_rc = shift;
|
|
nc_msg($verbose, "Error getting adapter physical location.\n");
|
|
nc_msg($verbose, "Status: Error getting physical location for phandle=$phandle. RC=$loc_rc.\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Timeout when openning console\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Cannot connect to the $node\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
|
|
}
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Timeout when openning console\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Cannot connect to the $node\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return undef if ($rc eq 1);
|
|
}
|
|
# Did we find one or more adapters?
|
|
|
|
if ($result[3] =~ /(\w*):(.*):(\w*\.\w*\.\w*):/) {
|
|
$loc_code = $3;
|
|
}else {
|
|
return undef;
|
|
}
|
|
}
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 ping_server
|
|
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to obtain the list of valid adapter connector properties
|
|
from the adapter card. Connector types can be rj45, sc, 9pin, aui,
|
|
bnc, or mic. Speeds can be 10, 100, or 1000. Duplex can be half or
|
|
full. This procedure will use the "supported-network-types"
|
|
argument to the get-package-property command to get the list of
|
|
properties for the given adapter.
|
|
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub ping_server{
|
|
my $phandle = shift;
|
|
my $full_path_name = shift;
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $mac_address = shift;
|
|
my $verbose = shift;
|
|
my $adap_speed = shift;
|
|
my $adap_duplex = shift;
|
|
my $list_type = shift;
|
|
my $server_ip = shift;
|
|
my $client_ip = shift;
|
|
my $gateway_ip = shift;
|
|
my $adap_prop_list_array;
|
|
#my %env = shift;
|
|
my $command;
|
|
my $linklocal_ip;
|
|
my @result;
|
|
my @done;
|
|
my @cmd;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my $state = 0;
|
|
my $timeout;
|
|
|
|
nc_msg($verbose, "Status: ping_server start\n");
|
|
|
|
#if (exists($env{'FIRMWARE_DUMP'})) {
|
|
# $full_path_name = Firmware_Dump($phandle);
|
|
#}
|
|
my $j = 0;
|
|
my $tty_do_ping = 0;
|
|
my $stack_level = 0;
|
|
my $properties_matched = 0;
|
|
my $adap_conn;
|
|
my $speed_list;
|
|
my $duplex_list;
|
|
my @adap_conn_list;
|
|
my $i;
|
|
my $ping_debug;
|
|
my $ping_rc;
|
|
my $rc = 0;
|
|
|
|
# If the adapter type chosen is ethernet, need to set the speed and duplex
|
|
# of the adapter before we perform the ping. If token ring or fddi,
|
|
# this is not required, so begin with state 2.
|
|
#
|
|
# cmd(0) sets the given adapter as active, to allow setting of speed
|
|
# and duplex
|
|
#
|
|
# cmd(1) writes the settings to the current adapter
|
|
#
|
|
# cmd(2) selects the /packages/net node as the active package to access the
|
|
# ping command.
|
|
#
|
|
# The next command in cmd(3) is the ping command. This places the return code
|
|
# on the stack. A return code of 0 indicates success.
|
|
#
|
|
# state 0, set the current adapter
|
|
$done[0] = 0;
|
|
$cmd[0] = "dev $full_path_name\r";
|
|
$msg[0] = "Status: selected $full_path_name as the active adapter\n";
|
|
#$pattern[0] = ".*dev(.*)0 >(.*)";
|
|
$pattern[0] = "0 >";
|
|
$newstate[0] = 1;
|
|
|
|
# state 1, send property command to $selected type;
|
|
$done[1] = 0;
|
|
$cmd[1] = "\" ethernet,$adap_speed,$adap_conn,$adap_duplex\" encode-string \" chosen-network-type\" property\r";
|
|
$msg[1] = "Status: chosen network type set\n";
|
|
#$pattern[1] =".*ethernet(.*)0 >(.*)";
|
|
$pattern[1] ="0 >";
|
|
$newstate[1]= 2;
|
|
|
|
# state 2, activate /packages/net
|
|
$done[2] = 0;
|
|
$cmd[2] = "dev /packages/net\r";
|
|
$msg[2] = "Status: selected the /packages/net node as the active package\n";
|
|
$pattern[2] = ".*dev.*packages.*net(.*)ok(.*)0 >(.*)";
|
|
#$pattern[2] = "ok";
|
|
$newstate[2]= 3;
|
|
|
|
# state 3, ping the server
|
|
$done[3] = 0;
|
|
$msg[3] = "Status: ping return code now on stack\n";
|
|
$newstate[3] = 4;
|
|
|
|
#IPv6
|
|
if ( $server_ip =~ /:/ ) {
|
|
#::1, calculate link local address
|
|
if ($client_ip eq "::1") {
|
|
my $command = "/opt/xcat/share/xcat/tools/mac2linklocal -m $mac_address";
|
|
$linklocal_ip = $rconsole->send($command);
|
|
} else {
|
|
$linklocal_ip = $client_ip;
|
|
}
|
|
$cmd[3] = "ping $full_path_name:ipv6,$server_ip,$linklocal_ip,$gateway_ip\r";
|
|
} else {
|
|
$cmd[3] = "ping $full_path_name:$server_ip,$client_ip,$gateway_ip\r";
|
|
}
|
|
$pattern[3] = ".*ping(.*)ok(.*)0 >(.*)";
|
|
|
|
# state 4, all done
|
|
$done[4] = 0;
|
|
$cmd[4] = "0 to my-self\r";
|
|
$msg[4] = "Status: resetting pointer\n";
|
|
#$pattern[4] = "(.*)ok(.*)0 >(.*)";
|
|
$pattern[4] = "ok";
|
|
$newstate[4] = 5;
|
|
|
|
# state 5, all done
|
|
$done[5] = 1;
|
|
|
|
|
|
# for ping, only need to set speed and duplex for ethernet adapters
|
|
#
|
|
if ( $list_type eq "ent" ) {
|
|
$state = 0;
|
|
|
|
# Get the list of properties for this adapter
|
|
#
|
|
$adap_prop_list_array = get_adap_prop($phandle, $rconsole, $node, $verbose);
|
|
if ( $adap_prop_list_array eq 1 ) {
|
|
nc_msg($verbose, "ERROR return from get_adap_prop\n");
|
|
return 1;
|
|
}
|
|
|
|
if ( $adap_prop_list_array eq 0 ) {
|
|
nc_msg($verbose, "No properties found for adapter '$full_path_name'\n");
|
|
return 1;
|
|
}
|
|
|
|
# Now need to verify that the network params we were passed are valid for
|
|
# the given adapter
|
|
#
|
|
my $a_speed;
|
|
my $a_conn;
|
|
my $a_duplex;
|
|
for my $prop (@$adap_prop_list_array) {
|
|
if( $prop =~ /(.*),(.*),(.*)/) {
|
|
$a_speed = $1;
|
|
$a_conn = $2;
|
|
$a_duplex = $3;
|
|
if ( ( $a_speed eq $adap_speed ) && ( $a_duplex eq $adap_duplex ) ) {
|
|
$properties_matched = 1;
|
|
if ( grep {$_ eq $a_conn } @adap_conn_list) {
|
|
push @adap_conn_list, $a_conn;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ( $properties_matched eq 0 ) {
|
|
$adap_speed = $a_speed;
|
|
$adap_duplex = $a_duplex;
|
|
$properties_matched = 1;
|
|
push @adap_conn_list, $a_conn;
|
|
}
|
|
|
|
$i = scalar(@adap_conn_list);
|
|
|
|
if ( $properties_matched eq 0 ) {
|
|
nc_msg($verbose, "'$adap_speed/$adap_duplex' settings are not supported on this adapter\n");
|
|
return 1;
|
|
}
|
|
} else {
|
|
$state = 2;
|
|
}
|
|
|
|
$timeout = 300;
|
|
while ( $done[$state] eq 0 ) {
|
|
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
@result = $rconsole->expect(
|
|
|
|
$timeout,
|
|
[qr/$pattern[$state]/s=>
|
|
sub {
|
|
nc_msg($verbose, $msg[$state]);
|
|
$rconsole->clear_accum();
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout when openning console\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof=>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to the $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
|
|
return 1 if ($rc eq 1);
|
|
|
|
if ( $state eq 1 ) {
|
|
$adap_conn = $adap_conn_list[$j];
|
|
$cmd[1] = "\" ethernet,$adap_speed,$adap_conn,$adap_duplex\" encode-string \" chosen-network-type\" property\r";
|
|
nc_msg($verbose, "Status: Trying connector type $adap_conn\n");
|
|
$j++;
|
|
}
|
|
if ((($tty_do_ping eq 1) && ($state eq 4)) || ($tty_do_ping != 1) && ($state eq 3) ) {
|
|
$ping_debug = $result[2];
|
|
}
|
|
if ( ( ($tty_do_ping eq 1) && ($state eq 5) ) || ($tty_do_ping != 1) && ($state eq 4) ) {
|
|
if ( ($tty_do_ping eq 1) && ($state eq 5) ) {
|
|
#$ping_rc = $result[2];
|
|
$stack_level = length($result[4]);
|
|
} elsif ( ($state eq 4) && ($tty_do_ping != 1) && ($result[2] =~ /PING SUCCESS/)) {
|
|
$ping_rc = 0;
|
|
#} elsif ( $result[2] =~ /unknown word/ ) {
|
|
# nc_msg($verbose, "Status: try tty-do-ping.\n");
|
|
# $ping_rc = 1;
|
|
# $tty_do_ping = 1;
|
|
# $state = 3 ;
|
|
# $cmd[3] = "\"" . $full_path_name . ":" . $client_ip . "," . $server_ip . "," . $gateway_ip . "\" tty-do-ping\r";
|
|
# $pattern[3] = "(.*)ok(.*)(\[1-2\]) >(.*)";
|
|
#
|
|
# # state 4, get the return code off the stack
|
|
# $done[4] = 0;
|
|
# $cmd[4] = ".\r";
|
|
# $msg[4] = "Status: return code displayed, stack empty\n";
|
|
# $pattern[4] = "(\[0-9\]*) ok(.*)(\[0-1\]) >(.*)";
|
|
# $newstate[4] = 5;
|
|
#
|
|
# # this command is used to work around a default catch problem in open
|
|
# # firmware. Without it, a default catch occurs if we try to set
|
|
# # adapter properties again after a ping
|
|
# #
|
|
# # state 5, re$pointer
|
|
# $done[5] = 0;
|
|
# $cmd[5] = "0 to my-self\r";
|
|
# $msg[5] = "Status: resetting pointer\n" ;
|
|
# $pattern[5] = "(.*)ok(.*)0 >(.*)";
|
|
# $newstate[5] = 6 ;
|
|
#
|
|
# # state 6, all done
|
|
# $done[6] = 1;
|
|
} else {
|
|
$ping_rc = 1;
|
|
}
|
|
|
|
if ( $ping_rc eq 0 ) {
|
|
nc_msg($verbose, "# $full_path_name ping successful.\n");
|
|
} elsif ( $ping_rc eq 1 ) {
|
|
nc_msg($verbose, "# $full_path_name ping unsuccessful.\n");
|
|
nc_msg($verbose, "# $full_path_name ping unsuccessful.\n");
|
|
nc_msg($verbose, "$ping_debug\n");
|
|
|
|
# An unsuccessful return may leave another item on the stack to
|
|
# be removed. Check for it, and remove if necessary
|
|
my $matchexp = 0;
|
|
my @exp_out;
|
|
while ( $stack_level != 0 ) {
|
|
@exp_out = ();
|
|
send_command($verbose, $rconsole, ".\r");
|
|
@exp_out = $rconsole->expect(
|
|
[qr/(\[0-9\]*) ok(.*)(\[0-1\]) >(.*)/s=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
$matchexp = 1;
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout in ping server\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
if ($matchexp) {
|
|
$matchexp = 0;
|
|
$stack_level = length($exp_out[4]);
|
|
nc_msg($verbose, "Status: stack_level is <$stack_level>\n");
|
|
}
|
|
}
|
|
# Check if there are any more adapter connector types
|
|
# to try
|
|
#
|
|
if ( ( $list_type eq "ent" ) && ( $j < $i ) ) {
|
|
$adap_conn = $adap_conn_list[$j];
|
|
nc_msg($verbose, "Status: Trying connector type $adap_conn\n");
|
|
$j++;
|
|
|
|
# Need to work around a default catch problem in open
|
|
# firmware by sending a "0 to my-self" instruction
|
|
# following the ping. To make sure this happens in
|
|
# this rare case where we have an adapter with multiple connectors,
|
|
# we have to force the instruction into the 0th slot in
|
|
# the array. This is OK, since we only set the current
|
|
# adapter once, upon entering this procedure.
|
|
#
|
|
$done[0] = 0;
|
|
$cmd[0] = "0 to my-self\r";
|
|
$msg[0] = "Status: resetting pointer\n";
|
|
$pattern[0] = "(.*)ok(.*)0 >(.*)";
|
|
$newstate[0] = 1;
|
|
|
|
$state = 0;
|
|
}
|
|
} else {
|
|
nc_msg($verbose, "Unexpected ping return code\n");
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
return $ping_rc;
|
|
}
|
|
|
|
|
|
#-------------------------------------------------------------------------------
|
|
|
|
=head3 set_disk_boot
|
|
|
|
|
|
|
|
PROCEDURE
|
|
|
|
Declare procedure to obtain the list of valid adapter connector properties
|
|
from the adapter card. Connector types can be rj45, sc, 9pin, aui,
|
|
bnc, or mic. Speeds can be 10, 100, or 1000. Duplex can be half or
|
|
full. This procedure will use the "supported-network-types"
|
|
argument to the get-package-property command to get the list of
|
|
properties for the given adapter.
|
|
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub set_disk_boot {
|
|
my @expect_out = shift;
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $x0;
|
|
my $x1;
|
|
my $x2;
|
|
my $command;
|
|
my @done;
|
|
my @cmd;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my $timeout;
|
|
my $state;
|
|
my $rc = 0;
|
|
|
|
# state 0, get SMS screen
|
|
$done[0] = 0;
|
|
if($expect_out[0] =~ /(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Select Boot Options(\r)/){
|
|
$x0 = $1;
|
|
$x1 = $2;
|
|
$x2 = $3;
|
|
$command = $4;
|
|
}
|
|
$cmd[0] = "$command\r";
|
|
$msg[0] = "Status: sending return to repaint SMS screen\n";
|
|
$pattern[0] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Configure Boot Device Order(\r)";
|
|
$newstate[0] = 1;
|
|
|
|
# state 1, Multiboot
|
|
$done[1] = 0;
|
|
$msg[1] = "Status: Multiboot\n";
|
|
$pattern[1] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Select 1st Boot Device(\r)";
|
|
$newstate[1] = 2;
|
|
|
|
# state 2, Configure Boot Device Order
|
|
$done[2] = 0;
|
|
$msg[2] = "Status: Configure Boot Device Order";
|
|
$pattern[2] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Hard Drive(.*)";
|
|
$newstate[2] = 3;
|
|
|
|
# state 3, Select Device Type
|
|
$done[3] = 0;
|
|
$msg[3] = "Status: Select Device Type";
|
|
$pattern[3] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)SCSI(.*)";
|
|
$newstate[3] = 4;
|
|
|
|
# state 4, Select Media Type
|
|
$done[4] = 0;
|
|
$msg[4] = "Status: Select Media Type";
|
|
$pattern[4] = "(\n)(\[ ])(\[1])(\[.])(\[ ]+)(\\S+)(.*)";
|
|
$newstate[4] = 5 ;
|
|
|
|
# state 5, Select Media Adapter
|
|
$done[5] = 0;
|
|
$msg[5] = "Status: Select Media Adapter";
|
|
$pattern[5] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)(\\S)(\[ ]+)SCSI (\[0-9]+) MB Harddisk(.*)loc=(.*)\[)]";
|
|
$newstate[5] = 6;
|
|
|
|
# state 6, Select Device
|
|
$done[6] = 0;
|
|
$msg[6] = "Status: Select Device";
|
|
$pattern[6] = "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Set Boot Sequence(.*)";
|
|
$newstate[6] = 7;
|
|
|
|
# state 7, Select Task
|
|
$done[7] = 0;
|
|
$msg[7] = "Status: Select Task";
|
|
$pattern[7] = "(.*)Current Boot Sequence(.*)";
|
|
$newstate[7] = 8 ;
|
|
|
|
# state 8, Return to Main Menu
|
|
$done[8] = 0;
|
|
$cmd[8] = "M";
|
|
$msg[8] = "Status: Restored Default Setting.\n" ;
|
|
$pattern[8] = "(.*)Navigation key(.*)";
|
|
$newstate[8] = 9;
|
|
|
|
# state 9, Getting to SMS Main Menu
|
|
$done[9] = 0;
|
|
$cmd[9] = "0\r";
|
|
$msg[9] = "Status: Getting to SMS Main Menu.\n";
|
|
$pattern[9] = "(.*)Exit SMS(.*)Prompt?(.*)";
|
|
$newstate[9] = 10;
|
|
|
|
# state 10, Exiting SMS
|
|
$done[10] = 0;
|
|
$cmd[10] = "Y";
|
|
$msg[10] = "Status: Exiting SMS.\n";
|
|
$pattern[10] = "(.*)ok(.*)0 >(.*)";
|
|
$newstate[10] = 11;
|
|
|
|
# state 11, all done
|
|
$done[11] = 1;
|
|
|
|
$timeout = 30;
|
|
$state = 0;
|
|
|
|
while ( $done[$state] eq 0 ) {
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
$rconsole->expect(
|
|
[qr/$pattern[$state]/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
if ( $state eq 4 ) {
|
|
if ( $expect_out[6] eq "None" ) {
|
|
$state = 8;
|
|
}
|
|
}
|
|
$state = $newstate[$state];
|
|
if ( ($state != 8) && ($state != 9) && ($state != 10) ) {
|
|
$cmd[$state] = "$expect_out[3]\r";
|
|
}
|
|
}
|
|
],
|
|
[qr/THE SELECTED DEVICES WERE NOT DETECTED IN THE SYSTEM/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, " Status: THE hard disk WERE NOT DETECTED IN THE SYSTEM!\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout =>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Timeout in settin boot order\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Cannot connect to $node\n");
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
if ($rc eq 1) {
|
|
return 1;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
###################################################################
|
|
#
|
|
# PROCEDURE
|
|
#
|
|
# Declare procedure to boot the system from the selected ethernet card.
|
|
#
|
|
# This routine does the following:
|
|
# 1. Initiates the boot across the network. (state 0 or 1)
|
|
#
|
|
# state 99 is normal exit and state -1 is error exit.
|
|
###################################################################
|
|
sub boot_network {
|
|
my $rconsole = shift;
|
|
if (($rconsole) && ($rconsole =~ /xCAT::/))
|
|
{
|
|
$rconsole = shift;
|
|
}
|
|
my $full_path_name = shift;
|
|
my $speed = shift;
|
|
my $duplex = shift;
|
|
my $chosen_adap_type = shift;
|
|
my $server_ip = shift;
|
|
my $client_ip = shift;
|
|
my $gateway_ip = shift;
|
|
my $netmask = shift;
|
|
my $dump_target = shift;
|
|
my $dump_lun = shift;
|
|
my $dump_port = shift;
|
|
my $verbose = shift;
|
|
my $extra_args = shift;
|
|
my $node = shift;
|
|
my $set_boot_order = shift;
|
|
my @net_device;
|
|
my @pattern;
|
|
my @cmd;
|
|
my @msg;
|
|
my @newstate;
|
|
my @done;
|
|
my $state = 0;
|
|
my $timeout;
|
|
my $boot_device_bk;
|
|
my $rc = 0;
|
|
|
|
|
|
nc_msg($verbose, "Status: boot_network start\n");
|
|
###################################################################
|
|
# Variables associated with each of the commands sent by this routine
|
|
# are defined below.
|
|
#
|
|
# The done variable is flag that is set to 1 to break out of the loop
|
|
#
|
|
# The cmd variable is the command to be sent to the chrp interface.
|
|
# In one case it set in the special processing code because the
|
|
# ihandle is not available then this code is executes.
|
|
#
|
|
# The msg variable contains the message sent after a successful pattern match
|
|
#
|
|
# The pattern variable is the pattern passed to expect
|
|
#
|
|
# The newstate variable indicates what command is to be issued next
|
|
###################################################################
|
|
|
|
# If the install adapter is Ethernet or Token Ring, set the speed and
|
|
# duplex during boot.
|
|
# state 0, stack count 0
|
|
$done[0] = 0;
|
|
if ($dump_target ne "") {
|
|
$net_device[0] = "$full_path_name:iscsi,ciaddr=$client_ip,subnet-mask=$netmask,itname=dummy,iport=$dump_port,ilun=$dump_lun,iname=$dump_target,siaddr=$server_ip,2";
|
|
$pattern[0] = "iSCSI";
|
|
} else {
|
|
if ($extra_args ne "" ) {
|
|
if ( $server_ip =~ /:/ ) { #ipv6
|
|
$net_device[0] = "$full_path_name:ipv6,speed=$speed,duplex=$duplex,siaddr=$server_ip,ciaddr=$client_ip,giaddr=$gateway_ip,filename=$node,$extra_args";
|
|
} else {
|
|
$net_device[0] = "$full_path_name:speed=$speed,duplex=$duplex,bootp,$server_ip,,$client_ip,$gateway_ip $extra_args";
|
|
}
|
|
} else {
|
|
if ( $server_ip =~ /:/ ) { #ipv6
|
|
$net_device[0] = "$full_path_name:ipv6,speed=$speed,duplex=$duplex,siaddr=$server_ip,ciaddr=$client_ip,giaddr=$gateway_ip,filename=$node";
|
|
} else {
|
|
$net_device[0] = "$full_path_name:speed=$speed,duplex=$duplex,bootp,$server_ip,,$client_ip,$gateway_ip";
|
|
}
|
|
}
|
|
$pattern[0] = "BOOTP";
|
|
}
|
|
|
|
$cmd[0] = "boot $net_device[0]\r";
|
|
$msg[0] = "Status: network boot initiated\n";
|
|
$newstate[0] = 99;
|
|
|
|
# If the install adapter is FDDI, don't set the speed and duplex
|
|
# state 1
|
|
$done[1] = 0;
|
|
$net_device[1] = "$full_path_name:bootp,$server_ip,,$client_ip,$gateway_ip";
|
|
$cmd[1] = "boot $net_device[1]\r";
|
|
$msg[1] = "Status: network boot initiated\n";
|
|
$pattern[1] = "BOOTP";
|
|
$newstate[1] = 99;
|
|
|
|
# state 99, all done
|
|
$done[99] = 1;
|
|
|
|
# state -1, all done
|
|
$done[100] = 1; #-1???
|
|
|
|
if ($chosen_adap_type eq "fddi" ) {
|
|
$state = 1;
|
|
} else {
|
|
if ($speed eq "" || $duplex eq "" ) {
|
|
nc_msg($verbose, "Cannot set speed or duplex for network boot\n");
|
|
return 1;
|
|
}
|
|
$state = 0;
|
|
}
|
|
##################################################################
|
|
# Set the boot device order.
|
|
##################################################################
|
|
if ( $set_boot_order > 0 ) {
|
|
$done[2] = 0;
|
|
$msg[2] = "Status: read original boot-device\n";
|
|
$cmd[2] = "printenv boot-device\r";
|
|
$pattern[2] = ".*boot-device\\s+(\\S+)(.*)ok(.*)";
|
|
$newstate[2] = 3;
|
|
|
|
$done[3] = 0;
|
|
$msg[3] = "Status: set the environment variable boot-device\n";
|
|
$pattern[3] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
if ( $state eq 0 ) {
|
|
$newstate[3] = 0;
|
|
} else {
|
|
$newstate[3] = 1;
|
|
}
|
|
$state = 2;
|
|
}
|
|
|
|
$timeout = 30; # shouldn't take long
|
|
while ( $done[$state] eq 0 ) {
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
$rconsole->expect(
|
|
[qr/$pattern[$state]/=>
|
|
sub {
|
|
$rconsole->clear_accum();
|
|
my @expect_out = shift;
|
|
if ( $state eq 2 ) {
|
|
if ( $set_boot_order eq 1 ) {
|
|
########################################
|
|
# Set network as boot device
|
|
########################################
|
|
$cmd[3] = "setenv boot-device $net_device[$newstate[3]]\r";
|
|
} elsif ( $set_boot_order eq 2 ) {
|
|
########################################
|
|
# Set network as 1st boot device,disk as 2nd boot device
|
|
########################################
|
|
$boot_device_bk = $expect_out[1];
|
|
$cmd[3] = "setenv boot-device $net_device[$newstate[3]] $boot_device_bk\r";
|
|
} elsif ( $set_boot_order eq 3 ) {
|
|
########################################
|
|
# Set disk as 1st boot device,network as 2nd boot device
|
|
########################################
|
|
$boot_device_bk = $expect_out[1];
|
|
$cmd[3] = "setenv boot-device $boot_device_bk $net_device[$newstate[3]]\r";
|
|
} elsif ( $set_boot_order eq 4 ) {
|
|
########################################
|
|
# set disk as boot device
|
|
########################################
|
|
$boot_device_bk = $expect_out[1];
|
|
$cmd[3] = "setenv boot-device $boot_device_bk\r";
|
|
}
|
|
}
|
|
nc_msg($verbose, $msg[$state]);
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
[qr/----/=>
|
|
sub {
|
|
nc_msg ($verbose, $msg[$state]);
|
|
$rconsole->clear_accum();
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
# For some old firmware, does not output "----"
|
|
[qr/BOOTP/=>
|
|
sub {
|
|
nc_msg ($verbose, $msg[$state]);
|
|
$rconsole->clear_accum();
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout when openning console\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof=>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to the $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return 1 if ($rc eq 1);
|
|
}
|
|
return 0;
|
|
}
|
|
#
|
|
# PROCEDURE
|
|
#
|
|
#
|
|
sub Boot {
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
#my @expect_out = shift;
|
|
my $rc = 0;
|
|
my $timeout;
|
|
my $state;
|
|
|
|
nc_msg($verbose, "Status: waiting for the boot image to boot up.\n");
|
|
|
|
$timeout = 1200; # could take a while depending on configuration
|
|
$rconsole->expect(
|
|
[qr/RESTART-CMD/=>
|
|
sub {
|
|
# If we see a "problem doing RESTART-CMD" message, we re-hit the OPEN-DEV
|
|
# issue after firmware rebooted itself and we need to retry the netboot once more
|
|
nc_msg($verbose, "The network boot ended in an error.\nError : RESTART-CMD\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
#[!(qr/[0-9A-F]+/)=>
|
|
# sub {
|
|
# nc_msg($verbose, "The network boot ended in an error.\n");
|
|
# #nc_msg($verbose, $expect_out[buffer]);
|
|
# $rc = 1;
|
|
# }
|
|
#],
|
|
[qr/BOOTP/=> #-ex
|
|
sub {
|
|
nc_msg($verbose, "# Network boot proceeding - matched BOOTP, exiting.\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
# Welcome to AIX - some old firmware does not output BOOTP or ----
|
|
[qr/Welcome/=> #-ex
|
|
sub {
|
|
nc_msg($verbose, "# Network boot proceeding - matched Welcome, exiting.\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
# tftp file download - some old firmware does not output BOOTP or ----
|
|
[qr/FILE/=> #-ex
|
|
sub {
|
|
nc_msg($verbose, "# Network boot proceeding - matched FILE.\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
# some old firmware does not output BOOTP or ----
|
|
[qr/Elapsed/=> #-ex
|
|
sub {
|
|
nc_msg($verbose, "# Network boot proceeding - matched Elapsed, exiting.\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[qr/------/=> #-ex
|
|
sub {
|
|
nc_msg($verbose, "# Network boot proceeding, exiting.\n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
my $mins = $timeout/60;
|
|
nc_msg($verbose, "Timeout waiting for the boot image to boot up. \
|
|
\n waited '$mins' minutes for the boot image to boot. \
|
|
\nEither the boot up has taken longer than expected or \
|
|
\nthere is a problem with system boot. Check the boot \
|
|
\nof the node to determine if there is a problem.\n");
|
|
$rconsole->clear_accum();
|
|
#nc_msg($verbose, $expect_out[buffer]);
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof=>
|
|
sub {
|
|
nc_msg($verbose, "Port closed waiting for boot image to boot.\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return $rc;
|
|
}
|
|
|
|
|
|
###################################################################
|
|
#
|
|
# PROCEDURE
|
|
#
|
|
# Create multiple open-dev function in Open Firmware to try open
|
|
# a device. The original problem is a firmware issue which fails
|
|
# to open a device. This procedure will create multiple sub
|
|
# function in firmware to circumvent the problem.
|
|
#
|
|
###################################################################
|
|
sub multiple_open_dev {
|
|
my $rconsole = shift;
|
|
if (($rconsole) && ($rconsole =~ /xCAT::/))
|
|
{
|
|
$rconsole = shift;
|
|
}
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $expect_out;
|
|
my $command;
|
|
my $timeout;
|
|
my $rc = 0;
|
|
|
|
send_command($verbose, $rconsole, "dev /packages/net \r");
|
|
send_command($verbose, $rconsole, "FALSE value OPEN-DEV_DEBUG \r");
|
|
|
|
if (exists $ENV{'OPEN_DEV_DEBUG'}) {
|
|
send_command($verbose, $rconsole, "TRUE to OPEN-DEV_DEBUG \r");
|
|
}
|
|
|
|
$command = ": new-open-dev ( str len -- true|false ) \
|
|
open-dev_debug if cr .\" NEW-OPEN-DEV: Entering, Device : \" 2dup type cr then \
|
|
{ _str _len ; _n } \
|
|
0 -> _n \
|
|
get-msecs dup d# 60000 + ( start timeout ) \
|
|
begin \
|
|
( start timeout ) get-msecs over > if \
|
|
open-dev_debug if \
|
|
( start timeout ) drop get-msecs swap - \
|
|
cr .\" FAILED TO OPEN DEVICE\" \
|
|
cr .\" NUMBER OF TRIES \" _n .d \
|
|
cr .\" TIME ELAPSED \" ( time ) .d .\" MSECONDS\" cr \
|
|
else \
|
|
( start timout ) 2drop \
|
|
then \
|
|
false exit \
|
|
else \
|
|
true \
|
|
then \
|
|
while \
|
|
( start timeout ) \
|
|
_n 1 + -> _n \
|
|
_str _len open-dev ( ihandle|false ) ?dup if \
|
|
-rot ( ihandle start timeout ) \
|
|
open-dev_debug if \
|
|
( start timeout ) drop get-msecs swap - \
|
|
cr .\" SUCCESSFULLY OPENED DEVICE\" \
|
|
cr .\" NUMBER OF TRIES \" _n .d \
|
|
cr .\" TIME ELAPSED \" ( time ) .d .\" MSECONDS\" cr \
|
|
else \
|
|
( start timeout ) 2drop \
|
|
then \
|
|
( ihandle ) exit \
|
|
then \
|
|
( start timeout ) \
|
|
repeat \
|
|
; \r";
|
|
send_command($verbose, $rconsole, $command);
|
|
|
|
$timeout = 30;
|
|
$rconsole->expect(
|
|
$timeout,
|
|
[qr/new-open-dev(.*)ok/=>
|
|
#[qr/>/=>
|
|
sub {
|
|
nc_msg($verbose, "Status: at End of multiple_open_dev \n");
|
|
$rconsole->clear_accum();
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout =>
|
|
sub {
|
|
send_user(2, "Timeout\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
send_user(2, "Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
|
|
$command = "patch new-open-dev open-dev net-ping \r";
|
|
send_command($verbose, $rconsole, $command);
|
|
|
|
$rconsole->expect(
|
|
$timeout,
|
|
[qr/patch new-open-dev(.*)ok/=>
|
|
#[qr/>/=>
|
|
sub {
|
|
nc_msg($verbose, "Status: at End of multiple_open_dev \n");
|
|
$rconsole->clear_accum();
|
|
return 0;
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout =>
|
|
sub {
|
|
send_user(2, "Timeout\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
send_user(2, "Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
|
|
return $rc;
|
|
}
|
|
###################################################################
|
|
#
|
|
# PROCEDURE
|
|
#
|
|
# Declare procedure to get additional firmware debug statement.
|
|
#
|
|
###################################################################
|
|
sub Firmware_Dump {
|
|
my $rconsole = shift;
|
|
my $node = shift;
|
|
my $verbose = shift;
|
|
my $device_path = shift;
|
|
my $phandle = shift;
|
|
my $expect_out;
|
|
my @done;
|
|
my @cmd;
|
|
my @msg;
|
|
my @pattern;
|
|
my @newstate;
|
|
my $timeout;
|
|
my $state = 0;
|
|
my $rc = 0;
|
|
|
|
nc_msg($verbose,"Status: Firmware_Dump start\n");
|
|
|
|
# state 0
|
|
$done[0] = 0;
|
|
$cmd[0] = "dev /packages/obp-tftp\r";
|
|
$msg[0] = "Status: selected /packages/obp_tftp\n";
|
|
$pattern[0] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[0] = 1;
|
|
|
|
# state 1
|
|
$done[1] = 0;
|
|
$cmd[1] = ": testing1 .\" OBP-TFTP entry\" cr init-nvram-adptr-parms ;\r";
|
|
$msg[1] = "Status: running test - OBP-TFTP entry\n";
|
|
$pattern[1] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[1] = 2;
|
|
|
|
# state 2
|
|
$done[2] = 0;
|
|
$cmd[2] = ": testing2 .\" OBP-TFTP exit, TRUE\" cr true ;\r";
|
|
$msg[2] = "Status: running test - OBP-TFTP exit\n";
|
|
$pattern[2] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[2] = 3;
|
|
|
|
# state 3
|
|
$done[3] = 0;
|
|
$cmd[3] = "patch testing1 init-nvram-adptr-parms open\r";
|
|
$msg[3] = "Status: running test - patch testing1\n";
|
|
$pattern[3] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[3] = 4;
|
|
|
|
# state 4
|
|
$done[4] = 0;
|
|
$cmd[4] = "patch testing2 true open\r";
|
|
$msg[4] = "Status: running test - patch testing2\n";
|
|
$pattern[4] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[4] = 5;
|
|
|
|
# state 5
|
|
$done[5] = 0;
|
|
$cmd[5] = "dev $device_path\r";
|
|
$msg[5] = "Status: running test - dev $device_path\n";
|
|
$pattern[5] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[5] = 6;
|
|
|
|
# state 6
|
|
$done[6] = 0;
|
|
$cmd[6] = "true to debug-init\r";
|
|
$msg[6] = "Status: running test - true to debug-init\n";
|
|
$pattern[6] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[6] = 7;
|
|
|
|
# state 7
|
|
$done[7] = 0;
|
|
$cmd[7] = "true to debug-error\r";
|
|
$msg[7] = "Status: running test - true to debug-error\n";
|
|
$pattern[7] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[7] = 8;
|
|
|
|
# state 8
|
|
$done[8] = 0;
|
|
$cmd[8] = "$phandle to active-package\r";
|
|
$msg[8] = "Status: running $phandle to active-package\n";
|
|
$pattern[8] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[8] = 9;
|
|
|
|
# state 9
|
|
$done[9] = 0;
|
|
$cmd[9] = ".properties\r";
|
|
$msg[9] = "Status: running .properies\n";
|
|
$pattern[9] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[9] = 10;
|
|
|
|
# state 10
|
|
$done[10] = 0;
|
|
$cmd[10] = "clear\r";
|
|
$msg[10] = "Status: running clear\n";
|
|
$pattern[10] = "(.*)ok(.*)(\[0-9]) >(.*)";
|
|
$newstate[10] = 11;
|
|
|
|
# state 11, all done
|
|
$done[11] = 1;
|
|
|
|
$state = 0;
|
|
$timeout = 30; # shouldn't take long
|
|
while ($done[$state] == 0) {
|
|
send_command($verbose, $rconsole, $cmd[$state]);
|
|
$rconsole->expect(
|
|
[qr/$pattern[$state]/ =>
|
|
sub {
|
|
nc_msg($verbose, $msg[$state]);
|
|
$rconsole->clear_accum();
|
|
$state = $newstate[$state];
|
|
}
|
|
],
|
|
[qr/]/=>
|
|
sub {
|
|
nc_msg($verbose, "Unexpected prompt\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/(.*)DEFAULT(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, "Default catch error\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
nc_msg($verbose, "Timeout\n");
|
|
nc_msg($verbose, "Status: timeout state is $state\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return 1 if ($rc eq 1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
=head3 lparnetbootexp
|
|
|
|
Function:
|
|
Same function as the lpar_netboot.exp
|
|
|
|
Return:
|
|
0 - good
|
|
1 - abort
|
|
2 - usage error
|
|
|
|
=cut
|
|
#-----------------------------------------------------------------------------
|
|
sub lparnetbootexp
|
|
{
|
|
my $opt = shift;
|
|
if (($opt) && ($opt =~ /xCAT::/))
|
|
{
|
|
$opt = shift;
|
|
}
|
|
my $CONSOLEBIN = "/opt/xcat/bin/rcons";
|
|
my $PROGRAM = "lpar_netboot";
|
|
my $noboot = 0; #default is to boot
|
|
my $Boot_timeout = 3000;
|
|
my @expect_out;
|
|
my $req = shift;
|
|
my $cmd;
|
|
my $timeout;
|
|
my $output;
|
|
my $done;
|
|
my $retry_count;
|
|
my $query_count;
|
|
my $match_pat;
|
|
my $loc_code;
|
|
my $ping_rc;
|
|
my $ping_result;
|
|
my $chosen_adap_type;
|
|
my $i;
|
|
my $phandle;
|
|
my $match;
|
|
my $list_type;
|
|
my $sysoutput;
|
|
my $exp_internal;
|
|
# Flags and initial variable
|
|
my $discovery = 0;
|
|
my $discover_all = 0;
|
|
my $verbose = 0;
|
|
my $discover_macaddr = 0;
|
|
my $rc = 0;
|
|
my $debug_flag = 0;
|
|
my $rmvterm_flag = 0;
|
|
my $immed_flag = 0;
|
|
my $from_of = 0;
|
|
my $dev_type_found = 0;
|
|
my $list_physical = 0;
|
|
my $set_boot_order = 0;
|
|
my $colon = 0;
|
|
my $choice = 0;
|
|
my $full_path_name;
|
|
my $adap_speed;
|
|
my $adap_duplex;
|
|
my $client_ip;
|
|
my $server_ip;
|
|
my $gateway_ip;
|
|
my $extra_args;
|
|
my $macaddress;
|
|
my $netmask;
|
|
my $dump_target;
|
|
my $dump_lun;
|
|
my $dump_port;
|
|
my $phys_loc;
|
|
my $userid;
|
|
my $passwd;
|
|
my $prompt = "\\\$ \$";
|
|
my $ssh_spawn_id = 0;
|
|
my $mac_address;
|
|
my @outputarray;
|
|
my $outputarrayindex = 0;
|
|
|
|
$::CALLBACK = $req->{callback};
|
|
#
|
|
# Log the process id
|
|
#
|
|
my $proc_id = getppid;
|
|
nc_msg($verbose, "$PROGRAM Status: process id is $proc_id\n");
|
|
|
|
#
|
|
#
|
|
# Process command line options and parameters
|
|
#
|
|
#
|
|
#done==
|
|
|
|
if ( exists ($opt->{A})) {
|
|
$discover_all = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{C})) {
|
|
$client_ip = $opt->{C};
|
|
}
|
|
|
|
if ( exists ($opt->{D})) {
|
|
$discovery = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{G})) {
|
|
$gateway_ip = $opt->{G};
|
|
}
|
|
|
|
if ( exists ($opt->{P})) {
|
|
$list_physical = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{M})) {
|
|
$discover_macaddr = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{N})) {
|
|
$netmask = $opt->{N};
|
|
}
|
|
|
|
if ( exists ($opt->{S})) {
|
|
$server_ip = $opt->{S};
|
|
}
|
|
|
|
if ( exists ($opt->{c})) {
|
|
$colon = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{d})) {
|
|
$adap_duplex = $opt->{d};
|
|
}
|
|
|
|
if ( exists ($opt->{f})) {
|
|
$rmvterm_flag = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{g})) {
|
|
$extra_args = $opt->{g};
|
|
}
|
|
|
|
if ( exists ($opt->{i})) {
|
|
$immed_flag = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{o})) {
|
|
$from_of = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{w})) {
|
|
$set_boot_order = $opt->{w};
|
|
}
|
|
if ( exists ($opt->{L})) {
|
|
$dump_lun = $opt->{L};
|
|
}
|
|
|
|
if ( exists ($opt->{l})) {
|
|
$phys_loc = $opt->{l};
|
|
}
|
|
|
|
if ( exists ($opt->{m})) {
|
|
$macaddress = $opt->{m};
|
|
}
|
|
|
|
if ( exists ($opt->{n})) {
|
|
$noboot = 1;
|
|
}
|
|
|
|
if ( exists ($opt->{p})) {
|
|
$dump_port = $opt->{p};
|
|
}
|
|
|
|
if ( exists ($opt->{s})) {
|
|
$adap_speed = $opt->{s};
|
|
}
|
|
|
|
if ( exists ($opt->{T})) {
|
|
$dump_target = $opt->{T};
|
|
}
|
|
|
|
if ( exists ($opt->{t})) {
|
|
$list_type = $opt->{t};
|
|
if ( $list_type eq "hfi-ent" ) {
|
|
$dev_pat[0] = "hfi-ethernet";
|
|
$dev_type[0] = "hfi-ent";
|
|
}
|
|
#
|
|
# Validate the argument
|
|
#
|
|
$dev_type_found = 0;
|
|
foreach my $dev (@dev_type) {
|
|
if ( $dev eq $list_type) {
|
|
$dev_type_found = 1;
|
|
last;
|
|
}
|
|
}
|
|
|
|
if ( $dev_type_found eq 0 ) {
|
|
nc_msg($verbose, "$PROGRAM:$dev_type_found, '$list_type' is not a valid adapter choice\n");
|
|
return [1];
|
|
}
|
|
}
|
|
|
|
if ( exists ($opt->{v})) {
|
|
$verbose = 1;
|
|
} else {
|
|
$verbose = 0;
|
|
}
|
|
if ( exists ($opt->{x})) {
|
|
$debug_flag = 1;
|
|
}
|
|
if ( exists ($opt->{help})) {
|
|
usage;
|
|
}
|
|
#set arg0 [lindex $argv 0]
|
|
#set arg1 [lindex $argv 1]
|
|
#if ( scalar(%$opt) > 10 ) {
|
|
# nc_msg($verbose, "$PROGRAM: Extraneous parameter(s)\n");
|
|
# usage;
|
|
#}
|
|
|
|
if ( $list_physical eq 0 ) {
|
|
$dev_pat[3] = "l-lan";
|
|
$dev_type[3] = "ent";
|
|
$dev_count = scalar(@dev_pat);
|
|
} else {
|
|
$dev_pat[3] = "";
|
|
$dev_type[3] = "";
|
|
$dev_count = scalar(@dev_pat);
|
|
}
|
|
|
|
if ( $set_boot_order > 1 ) {
|
|
$dev_pat[4] = "scsi";
|
|
$dev_type[4] = "disk";
|
|
$dev_count = scalar(@dev_pat);
|
|
}
|
|
my $node = $opt->{node};
|
|
my $profile = $opt->{pprofile};
|
|
my $manage = $opt->{fsp};
|
|
my $lparid = $opt->{id};
|
|
my $hcp = $opt->{hcp};
|
|
|
|
|
|
|
|
if ($dev_type_found) { nc_msg($verbose, "$PROGRAM Status: List only $list_type adapters\n"); }
|
|
if ($noboot) { nc_msg($verbose, "$PROGRAM Status: -n (no boot) flag detected\n"); }
|
|
if ($discovery) { nc_msg($verbose, "$PROGRAM Status: -D (discovery) flag detected\n"); }
|
|
if ($discover_all) { nc_msg($verbose, "$PROGRAM Status: -A (discover all) flag detected\n" ); }
|
|
if ($verbose) { nc_msg($verbose, "$PROGRAM Status: -v (verbose debug) flag detected\n"); }
|
|
if ($discover_macaddr) { nc_msg($verbose, "$PROGRAM Status: -M (discover mac address) flag detected\n"); }
|
|
if ($immed_flag) { nc_msg($verbose, "$PROGRAM Status: -i (force immediate shutdown) flag detected\n"); }
|
|
if ($list_physical) { nc_msg($verbose, "$PROGRAM Status: -P (list only phsical network) flag detected\n");}
|
|
if ($colon) { nc_msg($verbose, "$PROGRAM Status: -c (list colon separated ) flag detected\n" ); }
|
|
if ($debug_flag) {
|
|
nc_msg($verbose, "$PROGRAM Status: -d (debug) flag detected\n");
|
|
#$exp_internal = 1;
|
|
#$log_user = 1;
|
|
}
|
|
if ($discovery and $adap_speed ) { nc_msg($verbose, "$PROGRAM Status: using adapter speed of $adap_speed\n" ); }
|
|
if ($discovery and $adap_duplex ) { nc_msg($verbose, "$PROGRAM Status: using adapter duplex of $adap_duplex\n" ); }
|
|
if ($discovery and $server_ip ) { nc_msg($verbose, "$PROGRAM Status: using server IP address of $server_ip\n"); }
|
|
if ($discovery and $client_ip) { nc_msg($verbose, "$PROGRAM Status: using client IP address of $client_ip\n" ); }
|
|
if ($discovery and $gateway_ip) { nc_msg($verbose, "$PROGRAM Status: using gateway IP address of $gateway_ip\n"); }
|
|
if ($discovery and $macaddress) { nc_msg($verbose, "$PROGRAM Status: using macaddress of $macaddress\n" ); }
|
|
if ($discovery and $phys_loc ) { nc_msg($verbose, "$PROGRAM Status: using physical location code of $phys_loc\n"); }
|
|
nc_msg($verbose, "node:".$node);
|
|
####################################
|
|
# process the arguments
|
|
####################################
|
|
$rc = xCAT::LparNetbootExp->ck_args($opt, $node, $verbose);
|
|
if ($rc != 0) {
|
|
nc_msg($verbose, "ck_args failed. \n");
|
|
return [1];
|
|
}
|
|
|
|
####################################
|
|
# decide if need to do the connect
|
|
####################################
|
|
|
|
|
|
####################################
|
|
# open the console
|
|
####################################
|
|
nc_msg($verbose, "open port\n");
|
|
$cmd = $::XCATROOT . '/bin/rcons ' . $node . ' -f';
|
|
my $rconsole = Expect->new;
|
|
##################################################
|
|
# raw_pty() disables command echoing and CRLF
|
|
# translation and gives a more pipe-like behaviour.
|
|
# Note that this must be set before spawning
|
|
# the process. Unfortunately, this does not work
|
|
# with AIX (IVM). stty(qw(-echo)) will at least
|
|
# disable command echoing on all platforms but
|
|
# will not suppress CRLF translation.
|
|
##################################################
|
|
#$rconsole->raw_pty(1);
|
|
#$rconsole->slave->stty(qw(sane -echo)); #hidden information return from rcons
|
|
|
|
##################################################
|
|
# exp_internal(1) sets exp_internal debugging
|
|
# to STDERR.
|
|
##################################################
|
|
#$rconsole->exp_internal( $verbose ); #hidden information return from rcons
|
|
|
|
##################################################
|
|
# log_stdout(0) disables logging to STDOUT.
|
|
# This corresponds to the Tcl log_user variable.
|
|
##################################################
|
|
#$rconsole->log_stdout( $verbose ); #hidden information return from rcons
|
|
$rconsole->log_stdout(0); #hidden information return from rcons
|
|
|
|
my $consolefork = $rconsole->spawn($cmd);
|
|
#$rconsole->log_file("/tmp/consolelog");
|
|
my $console_pid = $rconsole->pid;
|
|
unless ($console_pid) {
|
|
nc_msg($verbose, "Unable to open console.\n");
|
|
return [1];
|
|
}
|
|
nc_msg($verbose, "spawn_id is $console_pid.\n");
|
|
####################################
|
|
#kill the process after received the signal
|
|
####################################
|
|
|
|
####################################
|
|
# check the result of rcons
|
|
####################################
|
|
nc_msg($verbose, "Connecting to the $node.\n");
|
|
sleep 3;
|
|
$timeout = 10;
|
|
$rconsole->expect(
|
|
$timeout,
|
|
[ qr/Enter.* for help.*/i =>
|
|
sub {
|
|
$rc = 0;
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Connected.\n");
|
|
}
|
|
],
|
|
[ timeout =>
|
|
sub {
|
|
$rc = 1;
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Timeout waiting for console connection.\n");
|
|
}
|
|
],
|
|
[ eof =>
|
|
sub {
|
|
$rc = 2;
|
|
$rconsole->clear_accum();
|
|
nc_msg($verbose, "Please make sure rcons $node works.\n");
|
|
}
|
|
],
|
|
);
|
|
|
|
unless ($rc eq 0) {
|
|
return [1];
|
|
}
|
|
####################################
|
|
# check the node state
|
|
####################################
|
|
nc_msg($verbose, "Checking for power off.\n");
|
|
my $subreq = $req->{subreq};
|
|
$output = xCAT::LparNetbootExp->run_lssyscfg($subreq, $verbose, $node);
|
|
if ($output =~ /Not Available/) {
|
|
nc_msg($verbose, "LPAR is Not Available. Please make sure the CEC's state.\n");
|
|
return [1];
|
|
} else {
|
|
nc_msg($verbose, "The lpar state is $output.\n");
|
|
}
|
|
|
|
if ($from_of) {
|
|
unless($output =~ /open firmware/i){
|
|
nc_msg(2, "You are using the -o option. Please make sure the LPAR's initial state is open firmware.\n");
|
|
return [1];
|
|
}
|
|
|
|
}
|
|
|
|
####################################
|
|
# if -o is not used, power node of
|
|
####################################
|
|
unless ($from_of) {
|
|
if (($output =~ /^off$/i) or ($output =~ /Not Activated/i) ) {
|
|
nc_msg($verbose, "# Power off complete.\n");
|
|
} else {
|
|
nc_msg($verbose, "# Begin to Power off the node.\n");
|
|
$sysoutput = xCAT::Utils->runxcmd(
|
|
{
|
|
command => ['rpower'],
|
|
node => [$node],
|
|
arg => ['off']
|
|
},
|
|
$subreq, 0, 1);
|
|
$output = join ',', @$sysoutput;
|
|
if ($::RUNCMD_RC != 0) { #$::RUNCMD_RC will get its value from runxcmd_output
|
|
nc_msg($verbose, "Unable to run rpower $node off.\n");
|
|
return [1];
|
|
}
|
|
|
|
unless ($output =~ /Success/) {
|
|
nc_msg($verbose, "Power off failed.\n");
|
|
return [1];
|
|
} else {
|
|
nc_msg($verbose, "Wait for power off.\n");
|
|
}
|
|
|
|
$done = 0;
|
|
$query_count = 0;
|
|
while (!$done) {
|
|
$output = xCAT::LparNetbootExp->run_lssyscfg($subreq, $verbose, $node);
|
|
if (($output =~ /^off$/i) or ($output =~ /Not Activated/)) {
|
|
nc_msg($verbose, "Power off complete.\n");
|
|
$done = 1;
|
|
next;
|
|
}
|
|
$query_count++;
|
|
if ($query_count > 300) {
|
|
nc_msg($verbose, "Power off failed.\n");
|
|
return [1];
|
|
}
|
|
sleep 1;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#################################################
|
|
# if set_boot_order is set, set the boot order
|
|
# if not set, power the node to open firmware
|
|
#################################################
|
|
$done = 0;
|
|
$retry_count = 0;
|
|
if ($set_boot_order > 1) {
|
|
nc_msg($verbose, "Power on $node to SMS.\n");
|
|
while (!$done) {
|
|
$sysoutput = xCAT::Utils->runxcmd(
|
|
{
|
|
command => ['rpower'],
|
|
node => [$node],
|
|
arg => ['sms']
|
|
},
|
|
$subreq, 0, 1);
|
|
$output = join ',', @$sysoutput;
|
|
nc_msg($verbose, "Waiting for power on...\n");
|
|
|
|
if ($::RUNCMD_RC != 0) {
|
|
nc_msg($verbose, "Unable to run rpower $node sms\n");
|
|
return [1];
|
|
}
|
|
unless ($output =~ /Success/) {
|
|
if ($retry_count eq 3) {
|
|
nc_msg($verbose, "Power off failed, msg is $output.\n");
|
|
return [1];
|
|
}
|
|
sleep 1;
|
|
$retry_count ++;
|
|
} else {
|
|
$done = 1;
|
|
}
|
|
}
|
|
} else {
|
|
nc_msg($verbose, "Power on the $node to the Open Firmware.\n");
|
|
while (!$done) {
|
|
$sysoutput = xCAT::Utils->runxcmd(
|
|
{
|
|
command => ['rpower'],
|
|
node => [$node],
|
|
arg => ['of']
|
|
},
|
|
$subreq, 0, 1);
|
|
$output = join ',', @$sysoutput;
|
|
nc_msg($verbose, "Waiting for power on...\n");
|
|
|
|
if ($::RUNCMD_RC != 0) {
|
|
nc_msg($verbose, "Unable to run rpower $node open firmware.\n");
|
|
return [1];
|
|
}
|
|
unless ($output =~ /Success/) {
|
|
if ($retry_count eq 3) {
|
|
nc_msg($verbose, "Power off failed, msg is $output.\n");
|
|
return [1];
|
|
}
|
|
sleep 1;
|
|
$retry_count ++;
|
|
} else {
|
|
$done = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
###########################
|
|
# Check the node state
|
|
###########################
|
|
$done = 0;
|
|
$query_count = 0;
|
|
$timeout = 1;
|
|
nc_msg($verbose, "Check the node state again;");
|
|
while(!$done) {
|
|
$output = xCAT::LparNetbootExp->run_lssyscfg($subreq, $verbose, $node);
|
|
nc_msg($verbose, "The node state is $output.\n");
|
|
if ($output =~ /Open Firmware/i) {
|
|
nc_msg($verbose, "Power on complete.\n");
|
|
$done = 1;
|
|
next;
|
|
}
|
|
|
|
$query_count++;
|
|
# if the node is not in openfirmware state, just wait for it
|
|
my @result = $rconsole->expect(
|
|
$timeout,
|
|
[ qr/(.*)elect this consol(.*)/=>
|
|
sub {
|
|
$rconsole->send("0\r");
|
|
$rconsole->clear_accum();
|
|
#$rconsole->exp_continue();
|
|
}
|
|
],
|
|
);
|
|
|
|
if ($query_count > 300 ) {
|
|
nc_msg($verbose, "Timed out waiting for power on of $node");
|
|
nc_msg($verbose, "error from rpower command : \"$output\" \n");
|
|
return [1];
|
|
}
|
|
sleep 1;
|
|
}
|
|
}
|
|
|
|
|
|
##############################
|
|
# Check for active console
|
|
##############################
|
|
nc_msg($verbose, "Check for active console.\n");
|
|
$done = 0;
|
|
$retry_count = 0;
|
|
|
|
$timeout = 10;
|
|
|
|
while (!$done) {
|
|
my @result = $rconsole->expect(
|
|
$timeout,
|
|
#[qr/ok(.*)0 >/=>
|
|
[qr/0(.*)ok/=>
|
|
sub {
|
|
nc_msg($verbose, " at ok prompt\n");
|
|
$rconsole->clear_accum();
|
|
$done = 1;
|
|
}
|
|
],
|
|
[qr/(.*)elect this consol(.*)/=>
|
|
sub {
|
|
nc_msg($verbose, " selecting active console\n");
|
|
$rconsole->clear_accum();
|
|
$rconsole->send("0\r");
|
|
}
|
|
],
|
|
[qr/English|French|German|Italian|Spanish|Portuguese|Chinese|Japanese|Korean/=>
|
|
sub {
|
|
nc_msg($verbose, "Languagae Selection Panel received\n");
|
|
$rconsole->clear_accum();
|
|
$rconsole->send("2\r");
|
|
}
|
|
],
|
|
[qr/admin/=>
|
|
sub {
|
|
nc_msg($verbose, "No password specified\n");
|
|
$rconsole->soft_close();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/Invalid Password/=>
|
|
sub {
|
|
nc_msg($verbose, "FSP password is invalid.\n");
|
|
$rconsole->soft_close();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[qr/SMS(.*)Navigation Keys/=>
|
|
sub {
|
|
nc_msg($verbose, "SMS\n");
|
|
$rconsole->clear_accum();
|
|
$done = 1;
|
|
}
|
|
],
|
|
[timeout=>
|
|
sub {
|
|
$rconsole->send("\r");
|
|
$retry_count++;
|
|
if ($retry_count eq 9) {
|
|
nc_msg($verbose, "Timeout waiting for ok prompt; exiting.\n");
|
|
$rconsole->soft_close();
|
|
$rc = 1;
|
|
}
|
|
}
|
|
],
|
|
[eof =>
|
|
sub {
|
|
nc_msg($verbose, "Cannot connect to $node");
|
|
$rconsole->soft_close();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
);
|
|
return [1] if ($rc eq 1);
|
|
}
|
|
|
|
|
|
|
|
|
|
##############################
|
|
# Set the node boot order
|
|
##############################
|
|
if ($set_boot_order) { #rnetboot node will not go here
|
|
nc_msg($verbose, "begin to set disk boot");
|
|
my $result = set_disk_boot( $rconsole, $node, $verbose);#@expect_out, $rconsole, $node, $verbose);
|
|
unless( $result ) {
|
|
nc_msg($verbose, "Unable to set $node boot order");
|
|
}
|
|
}
|
|
|
|
sleep 1;
|
|
|
|
##############################
|
|
# Call get_phandle to gather
|
|
# information for all the
|
|
# supported network adapters
|
|
# in the device tree.
|
|
##############################
|
|
$done = 0;
|
|
$retry_count = 0;
|
|
nc_msg($verbose, "begin to run get_phandle");
|
|
while (!$done) {
|
|
my $result = get_phandle($rconsole, $node, $verbose);
|
|
if ( $result eq 1) {
|
|
$retry_count++;
|
|
$rconsole->send("\r");
|
|
if ( $retry_count eq 3) {
|
|
nc_msg($verbose, "Unable to obtain network adapter information. Quitting.\n");
|
|
return [1];
|
|
}
|
|
} else {
|
|
$done = 1;
|
|
}
|
|
}
|
|
|
|
|
|
##############################
|
|
# Call multiple_open_dev to
|
|
# circumvent firmware OPEN-DEV
|
|
# failure
|
|
##############################
|
|
nc_msg($verbose, "begin to run multiple_open_dev");
|
|
my $result = xCAT::LparNetbootExp->multiple_open_dev($rconsole, $node, $verbose);
|
|
if ( $result eq 1) {
|
|
nc_msg($verbose, "Unable to obtain network adapter information. Quitting.\n");
|
|
return [1];
|
|
}
|
|
|
|
##############################
|
|
#
|
|
##############################
|
|
nc_msg($verbose, "begin to process opt-discovery");
|
|
if ($discovery) { #rnetboot node will not go here
|
|
nc_msg($verbose, "# Client IP address is $client_ip\n");
|
|
nc_msg($verbose, "# Server IP address is $server_ip\n");
|
|
nc_msg($verbose, "# Gateway IP address is $gateway_ip\n");
|
|
}
|
|
|
|
|
|
##############################
|
|
# Display information for all
|
|
# supported adapters
|
|
##############################
|
|
if ($noboot) { #if not do net boot
|
|
if ($list_type) {
|
|
$match_pat = $list_type;
|
|
} else {
|
|
$match_pat = ".*";
|
|
}
|
|
|
|
|
|
if($colon) {
|
|
nc_msg($verbose, "#Type:Location_Code:MAC_Address:Full_Path_Name:Ping_Result:Device_Type:Size_MB:OS:OS_Version:\n");
|
|
$outputarrayindex++; # start from 1, 0 is used to set as 0
|
|
$outputarray[$outputarrayindex] = "#Type:Location_Code:MAC_Address:Full_Path_Name:Ping_Result:Device_Type:Size_MB:OS:OS_Version:";
|
|
} else {
|
|
nc_msg($verbose, "# Type \tLocation Code \tMAC Address\t Full Path Name\t Ping Result\n");
|
|
$outputarrayindex++;
|
|
$outputarray[$outputarrayindex] = "# Type \tLocation Code \tMAC Address\t Full Path Name\t Ping Result";
|
|
}
|
|
|
|
if ( $discover_all ) { #getmacs here
|
|
for( $i = 0; $i < $adapter_found; $i++) {
|
|
if ($adap_type[$i] =~ /$match_pat/) {
|
|
if (!($adap_type[$i] eq "hfi-ent")) {
|
|
$mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
|
|
$loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
|
|
}
|
|
$ping_result = "";
|
|
if ($discovery) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
nc_msg($verbose, "ping_server returns $ping_rc\n");
|
|
unless( $ping_rc eq 0) {
|
|
$ping_result = "unsuccessful";
|
|
} else {
|
|
$ping_result = "successful";
|
|
}
|
|
}
|
|
|
|
if ( $adap_type[$i] eq "hfi-ent") {
|
|
$mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
|
|
$loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
|
|
}
|
|
|
|
if ($full_path_name_array[$i] =~ /vdevice/) {
|
|
$device_type = "virtual";
|
|
} else {
|
|
$device_type = "physical";
|
|
}
|
|
|
|
if($colon) {
|
|
nc_msg($verbose, "$adap_type[$i]\:$loc_code\:$mac_address\:$full_path_name_array[$i]\:$ping_result\:$device_type\:\:\:\:\n");
|
|
$outputarrayindex++;
|
|
$outputarray[$outputarrayindex] = "$adap_type[$i]\:$loc_code\:$mac_address\:$full_path_name_array[$i]\:$ping_result\:$device_type\:\:\:\:";
|
|
} else {
|
|
nc_msg($verbose, "$adap_type[$i] $loc_code $mac_address $full_path_name_array[$i] $ping_result $device_type\n");
|
|
$outputarrayindex++;
|
|
$outputarray[$outputarrayindex] = "$adap_type[$i] $loc_code $mac_address $full_path_name_array[$i] $ping_result $device_type";
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
for( $i = 0; $i < $adapter_found; $i++) {
|
|
if ($adap_type[$i] =~ /$match_pat/) {
|
|
if (!($adap_type[$i] eq "hfi-ent")) {
|
|
$mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
|
|
$loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
|
|
}
|
|
$ping_result = "";
|
|
if ($discovery) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
nc_msg($verbose, "ping_server returns $ping_rc\n");
|
|
unless( $ping_rc eq 0) {
|
|
$ping_result = "unsuccessful";
|
|
} else {
|
|
$ping_result = "successful";
|
|
}
|
|
}
|
|
|
|
if ( $adap_type[$i] eq "hfi-ent") {
|
|
$mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
|
|
$loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
|
|
}
|
|
|
|
if ($full_path_name_array[$i] =~ /vdevice/) {
|
|
$device_type = "virtual";
|
|
} else {
|
|
$device_type = "physical";
|
|
}
|
|
|
|
if($colon) {
|
|
nc_msg($verbose, "$adap_type[$i]\:$loc_code\:$mac_address\:$full_path_name_array[$i]\:$ping_result\:$device_type\:\:\:\:\n");
|
|
} else {
|
|
nc_msg($verbose, "$adap_type[$i] $loc_code $mac_address $full_path_name_array[$i] $ping_result $device_type\n");
|
|
}
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
if ($from_of != 1) {
|
|
nc_msg($verbose, "power off the node after noboot eq 1\n");
|
|
$sysoutput = xCAT::Utils->runxcmd(
|
|
{
|
|
command => ['rpower'],
|
|
node => [$node],
|
|
arg => ['off']
|
|
},
|
|
$subreq, 0, 1);
|
|
$output = join ',', @$sysoutput;
|
|
if ($::RUNCMD_RC != 0) {
|
|
nc_msg($verbose, "Unable to run rpower $node sms.\n");
|
|
nc_msg($verbose, "Status: error from rpower command\n");
|
|
nc_msg($verbose, "Error : $output\n");
|
|
return [1];
|
|
}
|
|
}
|
|
} else { # Do a network boot
|
|
# Loop throught the adapters and perform a ping test to discover an
|
|
# adapter that pings successfully, then use that adapter to network boot.
|
|
if ($discover_all) { #rnetboot should not use -A
|
|
for ($i = 0; $i < $adapter_found; $i++) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
|
|
|
|
if ( $ping_rc eq 0) {
|
|
$phandle = $phandle_array[$i];
|
|
$full_path_name = $full_path_name_array[$i];
|
|
$chosen_adap_type = $adap_type[$i];
|
|
last;
|
|
}
|
|
}
|
|
} elsif ( $macaddress ne "" ) { #rnetboot here
|
|
$match = 0;
|
|
for ($i = 0; $i < $adapter_found; $i++) {
|
|
if ($adap_type[$i] =~ /hfi-ent/) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
}
|
|
$mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
|
|
if ( $macaddress =~ /$mac_address/ ) {
|
|
if ($discovery eq 1) {
|
|
unless ( $adap_type[$i] eq "hfi-ent" ) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
}
|
|
unless ( $ping_rc eq 0) {
|
|
nc_msg($verbose, "Unable to boot network adapter.\n" );
|
|
return [1];
|
|
}
|
|
}
|
|
$phandle = $phandle_array[$i];
|
|
$full_path_name = $full_path_name_array[$i];
|
|
$chosen_adap_type = $adap_type[$i];
|
|
$match = 1;
|
|
last;
|
|
}
|
|
}
|
|
unless($match) {
|
|
nc_msg($verbose, "Can not find mac address '$macaddress'\n");
|
|
return [1];
|
|
}
|
|
} elsif ( $phys_loc ne "") {
|
|
$match = 0;
|
|
for ($i = 0; $i < $adapter_found; $i++) {
|
|
$loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
|
|
if ($loc_code =~ /$phys_loc/) {
|
|
if ($discovery) {
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
unless ($ping_rc eq 0) {
|
|
nc_msg($verbose, "Unable to boot network adapter.\n");
|
|
return [1];
|
|
}
|
|
}
|
|
$phandle = $phandle_array[$i];
|
|
$full_path_name = $full_path_name_array[$i];
|
|
$chosen_adap_type = $adap_type[$i];
|
|
$match = 1;
|
|
last;
|
|
}
|
|
}
|
|
if (!$match) {
|
|
nc_msg($verbose, "Can not find physical location '$phys_loc'\n");
|
|
return [1];
|
|
}
|
|
} else {
|
|
#
|
|
# Use the first ethernet adapter in the
|
|
# device tree.
|
|
#
|
|
for ($i = 0; $i < $adapter_found; $i++) {
|
|
nc_msg($verbose, " begint to boot from first adapter in the device tree \n");
|
|
if ($adap_type[$i] eq $list_type ) {
|
|
if ( $discovery eq 1 ){
|
|
$ping_rc = ping_server($phandle_array[$i], $full_path_name_array[$i], $rconsole, $node, $mac_address, $verbose, $adap_speed, $adap_duplex, $list_type, $server_ip, $client_ip, $gateway_ip);
|
|
unless ($ping_rc eq 0) {
|
|
return [1];
|
|
}
|
|
}
|
|
$phandle = $phandle_array[$i];
|
|
$full_path_name = $full_path_name_array[$i];
|
|
$chosen_adap_type = $adap_type[$i];
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
my $result;
|
|
if ($full_path_name eq "") {
|
|
nc_msg($verbose, "Unable to boot network adapter.\n");
|
|
return [1];
|
|
} else {
|
|
nc_msg($verbose, "# Network booting install adapter.\n");
|
|
$result = xCAT::LparNetbootExp->boot_network($rconsole, $full_path_name, $adap_speed, $adap_duplex , $chosen_adap_type, $server_ip, $client_ip, $gateway_ip, $netmask, $dump_target, $dump_lun, $dump_port, $verbose, $extra_args, $node, $set_boot_order );
|
|
}
|
|
|
|
|
|
if ($result eq 0) {
|
|
nc_msg($verbose, "bootp sent over netowrk.\n");
|
|
my $res = Boot($rconsole, $node, $verbose);#, @expect_out);
|
|
unless ($res eq 0) {
|
|
nc_msg($verbose, "Can not boot, result = $res. \n");
|
|
}
|
|
} else {
|
|
nc_msg($verbose, "return code $result from boot_network\n");
|
|
}
|
|
|
|
###########################################################################
|
|
# Need to retry network boot because of intermittant network failure
|
|
# after partition reboot. Force partition to stop at Open Firmware prompt.
|
|
###########################################################################
|
|
if ($result eq 5) {
|
|
|
|
$timeout = 300;
|
|
$rconsole->expect(
|
|
$timeout,
|
|
[ qr/keyboard/i,
|
|
sub {
|
|
$rconsole->send("8\r");
|
|
$rconsole->clear_accum();
|
|
sleep 10;
|
|
}
|
|
],
|
|
[ qr/timeout/i,
|
|
sub {
|
|
nc_msg($verbose, "Timeout; exiting.\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[ eof =>
|
|
sub {
|
|
nc_msg($verbose, "cannot connect to $node.\n");
|
|
$rconsole->clear_accum();
|
|
$rc = 1;
|
|
}
|
|
],
|
|
[
|
|
sub {
|
|
nc_msg($verbose, "# Network booting install adapter.\n");
|
|
nc_msg($verbose, "Retrying network-boot from RESTART-CMD error.\n");
|
|
$done = 0;
|
|
while (! $done ) {
|
|
my $res = xCAT::LparNetbootExp->boot_network($node,);
|
|
if ($res eq 0) {
|
|
$done = 1;
|
|
} else {
|
|
sleep 10;
|
|
}
|
|
}
|
|
}
|
|
],
|
|
);
|
|
return [1] if ($rc eq 1);
|
|
nc_msg($verbose, "# bootp sent over network.\n");
|
|
$rc = Boot($rconsole, $node, $verbose);#, @expect_out);
|
|
unless ($rc eq 0) {
|
|
nc_msg($verbose, "Can't boot here. \n");
|
|
}
|
|
}
|
|
}
|
|
|
|
################################################
|
|
# mission accomplished, beam me up scotty.
|
|
#################################################
|
|
unless ($noboot) { #if do the rnetboot, just return
|
|
if ( $rc eq 0) {
|
|
nc_msg($verbose, "# Finished.\n" );
|
|
$outputarrayindex++;
|
|
$outputarray[$outputarrayindex] = "Finished.";
|
|
} else {
|
|
nc_msg($verbose, "# Finished in an error.\n");
|
|
$outputarrayindex++;
|
|
$outputarray[$outputarrayindex] = "Finished in an error.";
|
|
}
|
|
} else { #if not rnetboot, for example, getmacs, power off the node
|
|
$done = 0;
|
|
$query_count = 0;
|
|
while(!$done) {
|
|
$output = xCAT::LparNetbootExp->run_lssyscfg($subreq, $verbose, $node);
|
|
|
|
##############################################
|
|
# separate the nodename from the query status
|
|
##############################################
|
|
if ($from_of != 1) {
|
|
if (( $output =~ /^off$/i ) or ($output =~ /Not Activated/i)) {
|
|
$done = 1;
|
|
}
|
|
} else {
|
|
if ( $output =~ /firmware/i ) {
|
|
$done = 1;
|
|
}
|
|
}
|
|
$query_count++;
|
|
if ( $query_count > 60 ){
|
|
$done = 1;
|
|
}
|
|
sleep 1;
|
|
}
|
|
}
|
|
$cmd = "~.";
|
|
send_command($verbose, $rconsole, $cmd);
|
|
|
|
$outputarray[0] = 0;
|
|
return \@outputarray;
|
|
|
|
}
|
|
|