255cce79d4
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@9342 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
151 lines
3.7 KiB
Plaintext
151 lines
3.7 KiB
Plaintext
=head1 NAME
|
|
|
|
B<rpower> - remote power control of nodes
|
|
|
|
=head1 SYNOPSIS
|
|
|
|
B<rpower> I<noderange> [B<--nodeps>] [B<on>|B<onstandby>|B<off>|B<suspend>|B<stat>|B<state>|B<reset>|B<boot>] [B<-m> I<table.column>==I<expectedstatus> [B<-m> I<table.column>=~I<expectedstatus>]] [B<-t> I<timeout>] [B<-r> I<retrycount>]
|
|
|
|
B<rpower> [B<-h>|B<--help>|B<-v>|B<--version>]
|
|
|
|
=head2 PPC (with IVM or HMC) specific:
|
|
|
|
B<rpower> I<noderange> [B<--nodeps>] {B<of>}
|
|
|
|
=head2 PPC (with HMC) specific:
|
|
|
|
B<rpower> I<noderange> [B<onstandby>]
|
|
|
|
B<rpower> I<noderange> [B<softoff>]
|
|
|
|
=head2 CEC (using Direct FSP Management) specific:
|
|
|
|
B<rpower> I<noderange> [B<on>|B<onstandby>|B<off>|B<stat>|B<state>|B<lowpower>]
|
|
|
|
=head2 Frame (using Direct FSP Management) specific:
|
|
|
|
B<rpower> I<noderange> [B<rackstandby>|B<exit_rackstandby>|B<stat>|B<state>]
|
|
|
|
=head2 Blade specific:
|
|
|
|
B<rpower> I<noderange> [B<cycle>|B<softoff>]
|
|
|
|
=head1 DESCRIPTION
|
|
|
|
B<rpower> controls the power for a single or range of nodes, via the out-of-band path.
|
|
|
|
=head1 OPTIONS
|
|
|
|
=over 4
|
|
|
|
=item B<on>
|
|
|
|
Turn power on.
|
|
|
|
=item B<onstandby>
|
|
|
|
Turn power on to standby state
|
|
|
|
=item B<lowpower>
|
|
|
|
Turn CEC to low power state. This is a disruptive operation which requires the CEC to be powered off prior to entering low power mode.
|
|
|
|
=item B<rackstandby>
|
|
|
|
Places the rack in the rack standby state. It requires that all CECs and DE be powered off before it will run.
|
|
|
|
=item B<exit_rackstandby>
|
|
|
|
Exit Rack standby will be the default state that a rack goes into when power is initially applied to the rack. It simply moves the BPA from Rack standby to both bpa's in standby state.
|
|
|
|
=item B<softoff>
|
|
|
|
Attempt to request clean shutdown of OS (may not detect failures in completing command)
|
|
|
|
=item B<off>
|
|
|
|
Turn power off.
|
|
|
|
=item B<suspend>
|
|
|
|
Suspend the target nodes execution
|
|
|
|
=item B<stat>|B<state>
|
|
|
|
Print the current power state/status.
|
|
|
|
=item B<reset>
|
|
|
|
Send a hard reset.
|
|
|
|
=item B<boot>
|
|
|
|
If off, then power on.
|
|
If on, then hard reset.
|
|
This option is recommended over B<cycle>.
|
|
|
|
=item B<cycle>
|
|
|
|
Power off, then on.
|
|
|
|
=item B<of>
|
|
|
|
Boot the node to open firmware mode.
|
|
|
|
=item B<-m> I<table.column>==I<expectedstatus> B<-m> I<table.column>=~I<expectedstatus>
|
|
|
|
Use one or multiple B<-m> flags to specify the node attributes and the expected status for the node installation monitoring and automatic retry mechanism. The operators ==, !=, =~ and !~ are valid. This flag must be used with -t flag.
|
|
|
|
Note: if the "val" fields includes spaces or any other characters that will be parsed by shell, the "attr<oper-ator>val" needs to be quoted. If the operator is "!~", the "attr<operator>val" needs to be quoted using single quote.
|
|
|
|
=item B<--nodeps>
|
|
|
|
Do not use dependency table (default is to use dependency table). Valid only with B<on|off|boot|reset|cycle> for blade power method and B<on|off|reset|softoff> for hmc/fsp power method.
|
|
|
|
=item B<-r> I<retrycount>
|
|
|
|
specify the number of retries that the monitoring process will perform before declare the failure. The default value is 3. Setting the retrycount to 0 means only monitoring the os installation progress and will not re-initiate the installation if the node status has not been changed to the expected value after timeout. This flag must be used with -m flag.
|
|
|
|
=item B<-t> I<timeout>
|
|
|
|
Specify the the timeout, in minutes, to wait for the expectedstatus specified by -m flag. This is a required flag if the -m flag is specified.
|
|
|
|
Power off, then on.
|
|
|
|
=item B<-h>|B<--help>
|
|
|
|
Prints out a brief usage message.
|
|
|
|
=item B<-v>|B<--version>
|
|
|
|
Display the version number.
|
|
|
|
=back
|
|
|
|
|
|
=head1 EXAMPLES
|
|
|
|
=over 3
|
|
|
|
=item *
|
|
|
|
rpower node4,node5 stat
|
|
|
|
node4: on
|
|
node5: off
|
|
|
|
=item *
|
|
|
|
rpower node5 on
|
|
|
|
node5: on
|
|
|
|
=back
|
|
|
|
|
|
=head1 SEE ALSO
|
|
|
|
L<noderange(3)|noderange.3>, L<rcons(1)|rcons.1>, L<rinv(1)|rinv.1>, L<rvitals(1)|rvitals.1>, L<rscan(1)|rscan.1>
|
|
|
|
|