149 lines
6.7 KiB
Plaintext
149 lines
6.7 KiB
Plaintext
=head1 Name
|
|
|
|
B<nodeset> - set the boot state for a noderange
|
|
|
|
=head1 B<Synopsis>
|
|
|
|
B<nodeset> [I<noderange>] [I<boot>|I<install>|I<stat>|I<iscsiboot>|I<netboot>|I<statelite>|I<offline>|I<runcmd=bmcsetup>|I<osimage[=<imagename>>]]
|
|
|
|
B<nodeset> I<noderange> I<osimage=<imagename>> [I<--noupdateinitrd>] [I<--ignorekernelchk>]
|
|
|
|
B<nodeset> [I<-h>|I<--help>|I<-v>|I<--version>]
|
|
|
|
=head1 B<Description>
|
|
|
|
B<nodeset> sets the next boot state for a single or range of
|
|
nodes or groups. It tells xCAT what you want to happen the next time the
|
|
nodes are booted up. See L<noderange(3)|noderange.3>. B<nodeset> accomplishes this by
|
|
changing the network boot files. Each xCAT node always boots from the
|
|
network and downloads a boot file with instructions on what action to
|
|
take next.
|
|
|
|
B<nodeset> will manipulate the boot configuration files of yaboot and pxelinux.0.
|
|
|
|
Assume that /tftpboot is the root for tftpd (set in L<site(5)|site.5>).
|
|
|
|
B<nodeset> for pxe makes changes to /tftpboot/pxelinux.cfg/{node hex ip}
|
|
|
|
B<nodeset> for yaboot makes changes to /tftpboot/etc/{node hex ip}
|
|
|
|
B<nodeset> only sets the next boot state, but does not reboot.
|
|
|
|
B<nodeset> is called by rinstall and winstall and is also called by the
|
|
installation process remotely to set the boot state back to "boot".
|
|
|
|
A user can supply their own scripts to be run on the mn or on the service node (if a hierarchical cluster) for a node when the nodeset command is run. Such scripts are called B<prescripts>. They should be copied to /install/prescripts dirctory. A table called I<prescripts> is used to specify the scripts and their associated actions. The scripts to be run at the beginning of the nodeset command are stored in the 'begin' column of I<prescripts> table. The scripts to be run at the end of the nodeset command are stored in the 'end' column of I<prescripts> table. You can run 'tabdump prescripts -d' command for details. The following two environment variables will be passed to each script: NODES contains all the names of the nodes that need to run the script for and ACTION contains the current nodeset action. If I<#xCAT setting:MAX_INSTANCE=number> is specified in the script, the script will get invoked for each node in parallel, but no more than I<number> of instances will be invoked at at a time. If it is not specified, the script will be invoked once for all the nodes.
|
|
|
|
|
|
=head1 B<Options>
|
|
|
|
=over 7
|
|
|
|
=item B<boot>
|
|
|
|
Instruct network boot loader to be skipped, generally meaning boot to hard disk
|
|
|
|
=item B<install>|B<install=profilename>|B<install=<os-architecture-profilename>>
|
|
|
|
Prepare server for installing a node according to the table configuration. This will
|
|
typically mean an unattended install file is created (i.e. kickstart or autoyast),
|
|
install resources will be verified in tftp and the bulk transfer method (http, ftp, or nfs for example), and the boot loader configuration file will be written.
|
|
Note: this option has been deprecated and will be removed in a future release. You should change to using the osimage option instead.
|
|
|
|
|
|
=item B<netboot>|B<netboot=profilename>|B<netboot=<os-architecture-profilename>>
|
|
|
|
Prepare server for deploying diskless nodes. With the diskless solution, the os image will reside in the RAM of the node.
|
|
Note: this option has been deprecated and will be removed in a future release. You should change to using the osimage option instead.
|
|
|
|
=item B<statelite>|B<statelite=profilename>|B<statelite=<os-architecture-profilename>>
|
|
|
|
Prepare server for deploying statelite nodes. Statelite provides an efficient and flexible diskless solution because most of the OS image is NFS mounted read-only, but a configurable list of directories and files can be read-write. The read-write files can either be persistent across reboots, or volatile (restoring to pristine state after reboot). The configuration can be done through B<litefile>, B<litetree> and B<statelite> tables.
|
|
Note: this option has been deprecated and will be removed in a future release. You should change to using the osimage option instead.
|
|
|
|
=item B<offline>
|
|
|
|
Cleanup the current pxe/tftp boot configuration files for the nodes requested
|
|
|
|
=item B<osimage>|B<osimage=<imagename>>
|
|
|
|
Prepare server for installing a node using the specified os image. The os image is defined in the I<osimage> table and I<linuximage> table. If the <imagename> is omitted, the os image name will be obtained from I<nodetype.provmethod> for the node.
|
|
|
|
=item B<--noupdateinitrd>
|
|
|
|
Skip the rebuilding of initrd when the 'netdrivers', 'drvierupdatesrc' or 'osupdatename' were set for injecting new drviers to initrd. But, the geninitrd command
|
|
should be run to rebuild the initrd for new drivers injecting. This is used to improve the performance of nodeset command.
|
|
|
|
=item B<--ignorekernelchk>
|
|
|
|
Skip the kernel version checking when injecting drivers from osimage.driverupdatesrc. That means all drivers from osimage.driverupdatesrc will be injected to initrd for the specific target kernel.
|
|
|
|
=item B<runimage>=<task>>
|
|
|
|
If you would like to run a task after deployment, you can define that task with this attribute.
|
|
|
|
=item B<stat>
|
|
|
|
Display the current boot loader config file description for the nodes requested
|
|
|
|
=item B<runcmd=bmcsetup>
|
|
|
|
This instructs the node to boot to the xCAT nbfs environment and proceed to configure BMC
|
|
for basic remote access. This causes the IP, netmask, gateway, username, and password to be programmed according to the configuration table.
|
|
|
|
=item B<shell>
|
|
|
|
This instructs tho node to boot to the xCAT nbfs environment, and present a shell prompt on console.
|
|
The node will also be able to be sshed into and have utilities such as wget, tftp, scp, nfs, and cifs. It will have storage drivers available for many common systems.
|
|
|
|
=item B<-h>|B<--help>
|
|
|
|
Print help.
|
|
|
|
=item B<-v>|B<--version>
|
|
|
|
Print version.
|
|
|
|
=back
|
|
|
|
|
|
=head1 B<Files>
|
|
|
|
B<noderes> table -
|
|
xCAT node resources file. See L<noderes(5)|noderes.5> for further
|
|
details.
|
|
|
|
B<nodetype> table -
|
|
xCAT node installation type file. See L<nodetype(5)|nodetype.5> for fur-
|
|
ther details. This is used to determine the node installation
|
|
image type.
|
|
|
|
B<site> table -
|
|
xCAT main configuration file. See L<site(5)|site.5> for further
|
|
details. This is used to determine the location of the TFTP
|
|
root directory and the TFTP xCAT subdirectory. /tftpboot and
|
|
/tftpboot/xcat is the default.
|
|
|
|
=head1 B<Examples>
|
|
|
|
=over 3
|
|
|
|
=item *
|
|
|
|
To setup to install mycomputeimage on the compute node group.
|
|
|
|
nodeset compute osimage=mycomputeimage
|
|
|
|
=item *
|
|
|
|
To run http://$master/image.tgz after deployment:
|
|
|
|
nodeset $node runimage=http://$MASTER/image.tgznodeset
|
|
|
|
=back
|
|
|
|
=head1 B<See> B<Also>
|
|
|
|
L<noderange(3)|noderange.3>, L<nodels(1)|nodels.1>, L<nodestat(1)|nodestat.1>, L<rinstall(8)|rinstall.8>,
|
|
L<makedhcp(8)|makedhcp.8>, L<osimage(7)|osimage.7>
|