#!/usr/bin/perl # IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html package xCAT::MsgUtils; # if AIX - make sure we include perl 5.8.2 in INC path. # Needed to find perl dependencies shipped in deps tarball. if ($^O =~ /^aix/i) { use lib "/usr/opt/perl5/lib/5.8.2/aix-thread-multi"; use lib "/usr/opt/perl5/lib/5.8.2"; use lib "/usr/opt/perl5/lib/site_perl/5.8.2/aix-thread-multi"; use lib "/usr/opt/perl5/lib/site_perl/5.8.2"; } use strict; use Sys::Syslog qw (:DEFAULT setlogsock); require xCAT::Table; #use locale; use Socket; use File::Path; $::NOK = -1; $::OK = 0; #-------------------------------------------------------------------------------- =head1 xCAT::MsgUtils =head2 Package Description This program module file, supports the xcat messaging and logging =cut #-------------------------------------------------------------------------------- =head2 Package Dependancies use strict; use Fcntl qw(:flock); use File::Basename; use File::Find; use File::Path; # Provides mkpath() =cut #-------------------------------------------------------------------------------- =head1 Subroutines =cut =head3 message Display a msg STDOUT,STDERR,log a msg and/or return to callback function. Arguments: The arguments of the message() function are: If address of the callback is provided, then the message will be returned either as data to the client's callback routine or to the xcat daemon or Client.pm ( bypass) for display/logging. See flags below. If address of the callback is not provide, then the message will be displayed to STDERR or STDOUT or added to SYSLOG. See flags below. If logging (L) is requested, the message structure must be a simple string. The routine will convert it to the appropriate callback structure, if a callback is provided. Note for logging xCAT:MsgUtils->start_logging and xCAT:MstUtils->stop_logging must be used to open and close the log. For compatibility with existing code, the message routine will move the data into the appropriate callback structure, if required. See example below, if the input to the message routine has the "data" structure filled in for an error message, then the message routine will move the $rsp->{data}->[0] to $rsp->{error}->[0]. This will allow xcatd/Client.pm will process all but "data" messages. The current client code should not have to change. my %rsp; $rsp->{data}->[0] = "Job did not run. \n"; xCAT::MsgUtils->message("E", $rsp, $::CALLBACK); Here the message routine will move $rsp->{data}->[0] to $rsp->{error}->[0], to match the "E"message code. Note the message routine will only check for the data to either exist in $rsp->{error}->[0] already, or to exist in $rsp->{data}->[0]. Here's the meaning of the 1st character, if a callback specified: D - DATA this is returned to the client callback routine N - Node Data this is returned to the client callback routine E - error this is displayed/logged by daemon/Client.pm. I - informational this is displayed/logged by daemon/Client.pm. S - Message will be logged to syslog ( severe error) syslog facily (local4) and priority (err) will be used. See /etc/syslog.conf file for the destination of the messages. Note S can be combined with other flags for example SE logs message to syslog to also display the message by daemon/ Client.pm. V - verbose. This flag is not valid, the calling routine should check for verbose mode before calling the message routine and only use the I flag for the message. If V flag is detected, it will be changed to an I flag. W - warning this is displayed/logged by daemon/Client.pm. L - Log error to xCAT Log on the local machine. Routine must have setup log by calling MsgUtils->start_log routine which returns $::LOG_FILE_HANDLE. Log is closed with MsgUtils->stop_log routine. Note can be combined with other flags: LS - Log to xCAT Log and Syslog LSE/LSI - Log to xCAT Log and Syslog and display if this option is used the message must be a simple string. The message routine will format for callback based on the (D,E,I,W) flag. Here's the meaning of the 1st character, if no callback specified: D - DATA goes to STDOUT E - error. This type of message will be sent to STDERR. I - informational goes to STDOUT N - Node informational goes to STDOUT S - Message will be logged to syslog ( severe error) Note S can be combined with other flags for example SE logs message to syslog and is sent to STDERR. SA logs message to syslog and to the auditlog DB table V - verbose. This flag is not valid, the calling routine should check for verbose mode before calling the message routine and only use the I flag for the message. If V flag is detected, it will be changed to an I flag. W - warning goes to STDOUT. L - log goes to /var/log/xcat/ ( see MsgUtils->start_log) Routine must have setup log by calling MsgUtils->start_log routine which returns $::LOG_FILE_HANDLE. Log is closed with MsgUtils->stop_log routine. Note can be combined with other flags: LS - Log to xCAT Log and Syslog LSE/LSI - Log to xCAT Log and Syslog and display Returns: none Error: none Example: Use with no callback # Message to STDOUT xCAT::MsgUtils->message('I', "Operation $value1 succeeded\n"); xCAT::MsgUtils->message('N', "Node:$node failed\n"); # Message to STDERR xCAT::MsgUtils->message('E', "Operation $value1 failed\n"); # Message to Syslog xCAT::MsgUtils->message('S', "Host $host not responding\n"); # Message to Syslog and auditlog table # see tabdump -d auditlog my $rsp = {}; $rsp->{syslogdata}->[0] = "$host not responding\n"; # for syslog # the next data is for auditlog table, audittime added below $rsp->{userid} ->[0] = $user; $rsp->{clientname} -> [0] = $client; $rsp->{clienttype} -> [0] = $clienttype; $rsp->{command} -> [0] = $command; $rsp->{noderange} -> [0] = $noderange; $rsp->{args} -> [0] = $arguments; $rsp->{status} -> [0] = $status; xCAT::MsgUtils->message('SA', $rsp); # Message to Log and Syslog xCAT::MsgUtils->message('LS', "Host $host not responding\n"); # Message to Log xCAT::MsgUtils->message('L', "Host $host not responding\n"); Use with callback # Message to callback my $rsp = {}; $rsp->{data}->[0] = "Job did not run. \n"; xCAT::MsgUtils->message("D", $rsp, $::CALLBACK); my $rsp = {}; $rsp->{error}->[0] = "No hosts in node list\n"; xCAT::MsgUtils->message("E", $rsp, $::CALLBACK); my $rsp = {}; $rsp->{node}->[0]->{name}->[0] ="mynode"; $rsp->{node}->[0]->{data}->[0] ="mydata"; xCAT::MsgUtils->message("N", $rsp, $callback); my $rsp = {}; $rsp->{info}->[0] = "No hosts in node list\n"; xCAT::MsgUtils->message("I", $rsp, $::CALLBACK); my $rsp = {}; $rsp->{warning}->[0] = "No hosts in node list\n"; xCAT::MsgUtils->message("W", $rsp, $::CALLBACK); my $rsp = {}; $rsp->{error}->[0] = "Host not responding\n"; xCAT::MsgUtils->message("S", $rsp, $::CALLBACK); # Message to Syslog and callback my $rsp = {}; $rsp->{error}->[0] = "Host not responding\n"; xCAT::MsgUtils->message("SE", $rsp, $::CALLBACK); # Message to Syslog and callback my $rsp = {}; $rsp->{info}->[0] = "Host not responding\n"; xCAT::MsgUtils->message("SI", $rsp, $::CALLBACK); # Message to Log, Syslog and callback my $msg; $msg = "Host not responding\n"; xCAT::MsgUtils->message("LSI", $msg, $::CALLBACK); # Message to Log and callback my $msg; $msg = "Host not responding\n"; xCAT::MsgUtils->message("LI", $msg, $::CALLBACK); Comments: Returns: 1 for internal error ( invalid input to the routine) =cut #-------------------------------------------------------------------------------- sub message { # Process the arguments shift; # get rid of the class name my $sev = shift; my $rsp = shift; my $call_back = shift; # optional my $exitcode = shift; # optional # should be I, D, E, S, SA ,LS, W , L,N # or S(I, D, E, S, W, L,N) my $stdouterrf = \*STDOUT; my $stdouterrd = ''; if ($sev =~ /[E]/) { $stdouterrf = \*STDERR; $stdouterrd = '1>&2'; } # check for logging my $logging = 0; if ($sev =~ /[L]/) { # no log opened, we have an error if (!defined($::LOG_FILE_HANDLE)) { if ($call_back) { # build callback structure my $newrsp; my $sevkey = 'error'; my $err = "Logging requested without setting up log by calling xCAT:MsgUtils->start_logging.\n"; push @{$newrsp->{$sevkey}}, $err; push @{$newrsp->{errorcode}}, "1"; $call_back->($newrsp); # send message to daemon/Client.pm return 1; } else { print "Logging requested without setting up log by calling xCAT:MsgUtils->start_logging.\n"; return 1; } } else { $logging = 1; } } if ($sev eq 'V') { # verbose should have been handled in calling routine $sev = "I"; } if ($sev eq 'SV') { # verbose should have been handled in calling routine $sev = "SI"; } # Check that correct structure is filled in. If the data is not in the # structure corresponding to the $sev, then look for it in "data" #TODO: this is not really right for a few reasons: 1) all the fields in the # response structure are arrays, so can handle multiple lines of text. We # should not just be check the 0th element. 2) a cmd may have both error # text and data text. 3) this message() function should just take in a plain # string and put it in the correct place based on the severity. # # if a callback routine is provided # if ($call_back) { # callback routine provided my $sevkey; if ($sev =~ /D/) { $sevkey = 'data'; } elsif ($sev =~ /N/) { $sevkey = 'node'; } elsif ($sev =~ /I/) { $sevkey = 'info'; } elsif ($sev =~ /W/) { $sevkey = 'warning'; } elsif ($sev =~ /E/) { $sevkey = 'error'; if (!defined($exitcode)) { $exitcode = 1; } # default to something non-zero } else { # build callback structure my $newrsp; my $sevkey = 'error'; my $err = "Invalid or no severity code passed to MsgUtils::message().\n"; push @{$newrsp->{$sevkey}}, $err; push @{$newrsp->{errorcode}}, "1"; $call_back->($newrsp); # send message to daemon/Client.pm return 1; } # check if logging to xCAT log, must be handled # separately because message data is a simple string # if (!$logging) { if ($sevkey ne 'data') { if (!defined($rsp->{$sevkey}) || !scalar(@{$rsp->{$sevkey}})) { # did not pass the text in in the severity-specific field # so fix it if (defined($rsp->{data}) && scalar(@{$rsp->{data}})) { push @{$rsp->{$sevkey}}, @{$rsp->{data}}; # assume they passed # in the text in the data field instead @{$rsp->{data}} = (); # clear out the data field } } } # if still nothing in the array, there is nothing to print out if (!defined($rsp->{$sevkey}) || !scalar(@{$rsp->{$sevkey}})) { return; } if ($exitcode) { push @{$rsp->{errorcode}}, $exitcode; } $call_back->($rsp); # send message to daemon/Client.pm @{$rsp->{$sevkey}} = (); # clear out the rsp structure in case they use it again @{$rsp->{data}} = (); @{$rsp->{errorcode}} = (); } else # logging { # write to log print $::LOG_FILE_HANDLE $rsp; # build callback structure my $newrsp; push @{$newrsp->{$sevkey}}, $rsp; if ($exitcode) { push @{$newrsp->{errorcode}}, $exitcode; } $call_back->($newrsp); # send message to daemon/Client.pm } } else # no callback provided { if ($logging) { # print to local xcat log print $::LOG_FILE_HANDLE $rsp; } else { # print to stdout print $stdouterrf $rsp . "\n"; # print the message } } # is syslog requested my $newrsp; if ($sev eq 'SA') { # if SA then need to pull first entry from $rsp # for syslog, to preserve old interface $newrsp = $rsp; $rsp = $newrsp->{syslogdata}->[0]; } if ($sev =~ /S/) { # If they want this msg to also go to syslog, do that now eval { openlog("xCAT", '', 'local4'); setlogsock(["tcp", "unix", "stream"]); syslog("err", $rsp); closelog(); }; my $errstr = $@; if ($errstr) { print $stdouterrf "Unable to log $rsp to syslog because of $errstr\n"; } } # if write to auditlog table requested if ($sev eq 'SA') { my $auditlogentry; my $tab = xCAT::Table->new("auditlog", -create => 1, -autocommit => 0); if ($tab) { my ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time); my $currtime = sprintf("%02d-%02d-%04d %02d:%02d:%02d", $mon + 1, $mday, $year + 1900, $hour, $min, $sec); $auditlogentry->{audittime} = $currtime; $auditlogentry->{userid} = $newrsp->{userid}->[0]; $auditlogentry->{clientname} = $newrsp->{clientname}->[0]; $auditlogentry->{clienttype} = $newrsp->{clienttype}->[0]; $auditlogentry->{command} = $newrsp->{command}->[0]; $auditlogentry->{noderange} = $newrsp->{noderange}->[0]; $auditlogentry->{args} = $newrsp->{args}->[0]; $auditlogentry->{status} = $newrsp->{status}->[0]; my @ret = $tab->setAttribs(undef, $auditlogentry); if (@ret > 1) { print $stdouterrf "Unable to open auditlog\n"; eval { openlog("xCAT", '', 'local4'); setlogsock(["tcp", "unix", "stream"]); syslog("err", "Unable to write to auditlog"); closelog(); }; } else { $tab->commit; } } else { # error print $stdouterrf "Unable to open auditlog\n"; eval { openlog("xCAT", '', 'local4'); setlogsock(["tcp", "unix", "stream"]); syslog("err", "Unable to open auditlog"); closelog(); }; } } return; } #-------------------------------------------------------------------------------- =head2 xCAT Logging Routines To use xCAT Logging follow the following sample my $rc=xCAT::MsgUtils->start_logging("mylogname"); # create/open log . . . # Message to Log and callback my $msg; $msg = "Host not responding\n"; xCAT::MsgUtils->message("LI", $msg, $::CALLBACK); . . # Message to Log my $msg; $msg = "Host not responding\n"; xCAT::MsgUtils->message("L", $msg); . my $rc=xCAT::MsgUtils->stop_logging(); # close log =cut #-------------------------------------------------------------------------------- =head3 start_logging Start logging messages to a logfile. Return the log file handle so it can be used for updates and to close the file when done logging using stop_logging. Arguments: $logfilename ( just name, path is by default /var/log/xcat) Returns: $::LOG_FILE_HANDLE Globals: $::LOG_FILE_HANDLE Error: $::NOK Example: xCAT:Utils->start_logging("logname"); =cut #-------------------------------------------------------------------------------- sub start_logging { my ($class, $logfilename) = @_; my ($cmd, $rc); my $xCATLogDir = "/var/log/xcat/"; my $logfile = $xCATLogDir; $logfile .= $logfilename; xCAT::MsgUtils->backup_logfile($logfile); # create the log directory if it's not already there if (!-d $xCATLogDir) { $cmd = "mkdir -m 644 -p $xCATLogDir"; $rc = system("$cmd"); if ($rc >> 8) { xCAT::MsgUtils->message('SE', "Error running $cmd.\n"); return ($::NOK); } } # open the log file unless (open(LOGFILE, ">>$logfile")) { # Cannot open file xCAT::MsgUtils->message('SE', "Error opening $logfile.\n"); return ($::NOK); } $::LOG_FILE_HANDLE = \*LOGFILE; $::LOG_FILE_NAME = $logfile; # Print the program name and date to the top of the logfile my $sdate = `/bin/date`; chomp $sdate; my $program = $0; xCAT::MsgUtils->message('L', "$program:logging started $sdate.\n"); return ($::LOG_FILE_HANDLE); } #-------------------------------------------------------------------------------- =head3 stop_logging Turn off message logging. Routine expects to have a file handle passed in via the global $::LOG_FILE_HANDLE. Arguments: Returns: $::OK Globals: $::LOG_FILE_HANDLE Error: none Example: MsgUtils->stop_logging(); Comments: closes the logfile and undefines $::LOG_FILE_HANDLE even on error. =cut #-------------------------------------------------------------------------------- sub stop_logging { my ($class) = @_; if (defined($::LOG_FILE_HANDLE)) { # Print the date at the bottom of the logfile my $sdate = `/bin/date`; chomp $sdate; my $program = $0; xCAT::MsgUtils->message('L', "$program:logging stopped $sdate.\n"); close($::LOG_FILE_HANDLE); undef $::LOG_FILE_HANDLE; } return $::OK; } #-------------------------------------------------------------------------------- =head3 backup_logfile Backup the current logfile. Move logfile to logfile.1. Shift all other logfiles (logfile.[1-3]) up one number. The original logfile.4 is removed as in a FIFO. Arguments: $logfile ( full path) Returns: $::OK Error: undefined Example: xCAT::MsgUtils->backup_logfile($logfile); =cut #-------------------------------------------------------------------------------- sub backup_logfile { my ($class, $logfile) = @_; my ($logfile1) = $logfile . ".1"; my ($logfile2) = $logfile . ".2"; my ($logfile3) = $logfile . ".3"; my ($logfile4) = $logfile . ".4"; if (-f $logfile) { rename($logfile3, $logfile4) if (-f $logfile3); rename($logfile2, $logfile3) if (-f $logfile2); rename($logfile1, $logfile2) if (-f $logfile1); rename($logfile, $logfile1); } return $::OK; } 1;