#!/bin/bash
#written in bash for fewest prerequisites
function get_def_interface {
    #gethostbyname on `hostname` would be helpful, but since we
    #are in bash, the best alternative is to use ping to get at it
    #don't want to grep in /etc/hosts or presume DNS
    #we are, however, presuming ipv4 for the moment
    retval=$(ping -c 1 `hostname`|head -n 1|cut -d\( -f 2|cut -d\) -f 1)
    if [ -z "$retval" -o "127.0.0.1" = "$retval" ]; then #ok, that didn't pan out, now we grab the first address that looks sane
	retval=`ifconfig|grep inet" " |grep -v addr:127.0.0.1|grep -v 'addr:169.254'|head -n 1|cut -d: -f 2|cut -d' ' -f 1`
    fi
    if [ -z "$retval" ]; then 
	echo "ERROR: Unable to reasonably guess the 'default' interface" >&2
	exit 1
    fi
    iface=`ifconfig|grep -v inet6|egrep '(Link|inet)'|grep -B1 'addr:'$retval |head -n 1|awk '{print $1}'`
    if [ -z "$iface" ]; then
	echo "ERROR: Unable to reasonably guess the default interface" >&2
	exit 1
    fi
    if brctl show | grep ^$iface >& /dev/null; then #
	OIFS=$IFS
	IFS=$'\n'
	INMATCH=0
	for brline in $(brctl show); do
	    if [ $(expr match "$brline" $iface) == $(expr length $iface) ]; then
		INMATCH=1
	    elif [ $(expr match "$brline" "	") != 1 ]; then
		INMATCH=0
	    fi
	    if [ "$INMATCH" == 1 ];  then
		if ! ethtool -i `echo $brline|awk '{print $NF}'`|grep "driver: tun" >& /dev/null; then
		    iface=`echo $brline|awk '{print $NF}'`
		    echo "$iface"
		    IFS=$OFIS
		    return
		fi
	    fi
	done
	IFS=$OFIS
    else 
	echo "$iface"
    fi
}
if [ "storageprereq" = "$1"  ]; then
    MOUNTURI="$2"
    DIRNAME=`echo $MOUNTURI|sed -e 's!nfs://!nfs_!'`
    MOUNTPATH=`echo $DIRNAME|sed -e 's!nfs_!!'|sed -e 's!/!:/!'`
    if mount|grep $MOUNTPATH > /dev/null; then
	exit 0;
    fi
    mkdir -p /var/lib/xcat/vmnt/$DIRNAME
    mount $MOUNTPATH /var/lib/xcat/vmnt/$DIRNAME
elif [ "bridgeprereq" = "$1" ]; then
    NETDESC="$2"
    if [ -z "$NETDESC" ]; then
	echo "Incorrect usage"
	exit 1
    fi
    if echo "$NETDESC"|grep ':'> /dev/null; then
	PORTS=`echo "$NETDESC"|cut -d: -f 1`
	BNAME=`echo "$NETDESC"|cut -d: -f 2`
    else 
	BNAME=$NETDESC
    fi
    if brctl showstp "$BNAME" > /dev/null; then
	echo "$BNAME"
	exit 0
    fi
    #Still here, that means we must build a bridge
    if [ -z "$PORTS" ]; then #No ports specified, default to whatever looks up
	PORTS=$(get_def_interface)
    fi
    if [ -z "$PORTS" ]; then #This has been checked many times before in theory, check again just in case
	exit 1
    fi
    #For now, we only support bridge name==network name.  This precludes
    #the config of the same vlan number on multiple fabrics, but
    #will cover that flexibility later if demanded (with 4k vlan ids, 
    #I think it would be unwise to reuse them as it could confuse anyway)
    if echo "$PORTS"|grep '&'; then #we have bonding... fun to be had
    #To be slack, going to just support one bond for now..
	modprobe bonding miimon=100 mode=4
	PORTS=`echo $PORTS |sed -e 's/&/ /'`
	ip link set bond0 up
	for p in $PORTS; do
	    #TODO: we are only going to manage the default
	    #route for now
	    saveroutes=`ip route | grep default| grep "dev $p"|grep via|sed -e 's/dev .*//'`
	    OIFS=$IFS
	    IFS=$'\n'
	    saveip=`ip addr show dev $p scope global|grep inet|grep -v dynamic|sed -e 's/inet.//'|sed -e 's/[^ ]*$//'`
	    if [ ! -z "$saveip" ]; then
	    	for line in $saveip; do 
			ip addr add dev bond0 $line
		done
	    fi
	    IFS=$OIFS
	    ifenslave bond0 $p
	    if [ ! -z "$saveroutes" ]; then
		ip route add $saveroutes
	    fi 
	done
	PORTS=bond0
    fi
    if echo "$BNAME"|egrep '^vl(an)?[0123456789]' > /dev/null; then 
	vlan="yes"
	TNAME=${BNAME##vl}
	TNAME=${TNAME##an}
	#We have a vlan... more fun
	modprobe 8021q
	vconfig add $PORTS $TNAME
	vconfig set_flag $PORTS.$TNAME 2 1 #Turn on GVRP where supported
	ip link set $PORTS.$TNAME up
	PORTS=$PORTS.$TNAME
    fi
    #Now, $PORTS is 'the' physical device to participate in a bridge
    #TODO: we are only going to manage the default
    #route for now
    brctl addbr $BNAME
    brctl setfd $BNAME 0 #fast forwarding
    ip link set $BNAME up
    saveroutes=`ip route | grep default| grep "dev $PORTS"|grep via|sed -e 's/dev .*//'`
    OIFS=$IFS
    IFS=$'\n'
    saveip=`ip addr show dev $PORTS scope global|grep inet|grep -v dynamic|sed -e 's/inet.//'|sed -e 's/[^ ]*$//'`
    #saveip=`ip addr show dev $PORTS scope global|grep inet|sed -e 's/inet.//'|sed -e 's/[^ ]*$//'`
    if [ ! -z "$saveip" ]; then
    	for line in $saveip; do 
		ip addr add dev $BNAME $line
	done
    else
        if [ ! -z "$3" ]; then
	    ip addr add dev $BNAME $3 
	fi
    fi
    brctl addif $BNAME $PORTS
    if [ ! -z "$saveip" ]; then
    	for line in $saveip; do 
		ip addr del dev $PORTS $line
	done
    fi
    if [ ! -z "$saveroutes" ]; then
	ip route add $saveroutes
    fi
    
    #now save the settings into the config files so that they will be persistent among reboots
    if [[ $OSVER = sles* ]] || [[ $OSVER = suse* ]] || [[ -f /etc/SuSE-release ]]; then
	nwdir="/etc/sysconfig/network"
	isSLES=1
    else 
	nwdir="/etc/sysconfig/network-scripts"
    fi 
    
     #write into the network configuration file
    if [[ $isSLES -eq 1 ]]; then
	cat >$nwdir/ifcfg-$PORTS <<EOF
DEVICE='$PORTS'
ONBOOT='yes'
BRIDGE='$BNAME'
EOF
	mac=`ip addr show dev $PORTS scope global|grep link|sed -e 's/link\/ether//'|sed -e 's/brd.*$//'|sed -e 's/[ ]*//'`
	if [ ! -z "$mac" ]; then
	    echo "HWADDR='$mac'" >> $nwdir/ifcfg-$PORTS
	fi
	if [ ! -z "$vlan" ]; then
	    echo "VLAN='yes'" >> $nwdir/ifcfg-$PORTS
	fi
	cat >$nwdir/ifcfg-$BNAME <<EOF	    
DEVICE='$BNAME'
TYPE='Bridge'
ONBOOT='yes'
PEERDNS='yes'
DELAY='0'
EOF
	if [ ! -z "$3" ]; then 
	    echo "IPADDR='$3'" >> $nwdir/ifcfg-$BNAME 
	    if [ ! -z "$4" ]; then
		echo "NETMASK='$4'" >> $nwdir/ifcfg-$BNAME
	    fi
	else
	    echo "BOOTPROTO=dhcp" >> $nwdir/ifcfg-$BNAME
	fi
    else
	cat >$nwdir/ifcfg-$PORTS <<EOF
DEVICE=$PORTS
ONBOOT=yes
BRIDGE=$BNAME
EOF
	mac=`ip addr show dev $PORTS scope global|grep link|sed -e 's/link\/ether//'|sed -e 's/brd.*$//'|sed -e 's/[ ]*//'`
	if [ ! -z "$mac" ]; then
	    echo "HWADDR=$mac" >> $nwdir/ifcfg-$PORTS
	fi
	if [ ! -z "$vlan" ]; then
	    echo "VLAN=yes" >> $nwdir/ifcfg-$PORTS
	fi
	cat >$nwdir/ifcfg-$BNAME <<EOF	    
DEVICE=$BNAME
TYPE=Bridge
ONBOOT=yes
PEERDNS=yes
DELAY=0
EOF
	if [ ! -z "$3" ]; then 
	    echo "IPADDR=$3" >> $nwdir/ifcfg-$BNAME 
	    if [ ! -z "$4" ]; then
		echo "NETMASK=$4" >> $nwdir/ifcfg-$BNAME
	    fi
	else
	    echo "BOOTPROTO=dhcp" >> $nwdir/ifcfg-$BNAME
	fi
    fi 
 
    ifup $BNAME
fi #END bridge config.