=head1 NAME

B<rspconfig> - remote power control of nodes

=head1 SYNOPSIS

B<rspconfig> I<noderange> {B<alert>|B<snmpdest>|B<community>}

B<rspconfig> I<noderange> B<alert>={B<on>|B<enable>|B<off>|B<disable>}

B<rspconfig> I<noderange> B<snmpdest>=I<snmpmanager-IP>

B<rspconfig> I<noderange> B<community>={B<public>|I<string>}

B<rspconfig> [B<-h>|B<--help>|B<-v>|B<--version>]

=head2 BMC specific:

B<rspconfig> I<noderange> {B<ip>|B<netmask>|B<gateway>|B<backupgateway>|B<garp>}

B<rspconfig> I<noderange> B<garp>={I<time>}
       
=head2 MPA specific:

B<rspconfig> I<noderange> {B<sshcfg>|B<snmpcfg>|B<build>|B<pd1>|B<pd2>|B<network>|B<swnet>|B<ntp>}

B<rspconfig> I<noderange> B<shcfg>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<snmpcfg>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}

B<rspconfig> I<noderange> B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}

B<rspconfig> I<noderange> B<network>={[B<ip>],[B<host>],[B<gateway>],[B<netmask>]|B<*>}

B<rspconfig> I<noderange> B<swnet>={[B<ip>],[B<gateway>],[B<netmask>]}

B<rspconfig> I<noderange> B<ntp>={[B<ntpenable>],[B<ntpserver>],[B<frequency>],[B<v3>]}

=head2 PPC specific:

B<rspconfig> I<noderange> {B<autopower>|B<iocap>|B<decfg>|B<memcfg>|B<procdecfg>|B<time>|B<date>|B<spdump>|B<sysdump>}

B<rspconfig> I<noderange> B<shcfg>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<snmpcfg>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}

B<rspconfig> I<noderange> B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}

B<rspconfig> I<noderange> B<autopower>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<iocap>={B<enable>|B<disable>}

B<rspconfig> I<noderange> B<time>={B<hh:mm:ss>}

B<rspconfig> I<noderange> B<date>={B<mm:dd:yyyy>}

B<rspconfig> I<noderange> B<decfg>={B<enable|disable>:B<policyname,...>}

B<rspconfig> I<noderange> B<procdecfg>={B<configure|deconfigure>:B<processingunit>:B<id,...>}

B<rspconfig> I<noderange> B<memdecfg>={B<configure|deconfigure>:B<processingunit>:B<unit|bank>:B<id,...>>}

=head1 DESCRIPTION

B<rspconfig> configures various settings in the nodes' service processors.  If only a keyword is
specified, without the B<=>, it displays the current value.

=head1 OPTIONS

=over 4

=item B<alert>={I<on>|I<enable>|I<off>|I<disable>}

Turn on or off SNMP alerts.

=item B<autopower>={I<enable>|I<disable>}

Select the policy for auto power restart. If enabled, the system will boot automatically once power is restored after a power disturbance.

=item B<backupgateway>

Get the BMC backup gateway ip address.

=item B<build>

Get the MPA firmware build ID.

=item B<community>={B<public>|I<string>}

Get or set the SNMP commmunity value. The default is I<public>.

=item B<date>={I<mm:dd:yyy>}

Enter the current date.

=item B<decfg>={I<enable|disable>:I<policyname,...>}

Enables or disables deconfiguration policies.

=item B<frequency>

The NTP update frequency (in minutes).

=item B<garp>=I<time>

Get or set Gratuitous ARP generation interval. The unit is number of 1/2 second.

=item B<gateway>

The gateway ip address.

=item B<iocap>={I<enable>|I<disable>}

Select the policy for I/O Adapter Enlarged Capacity. This option controls the size of PCI memory space allocated to each PCI slot.

=item B<ip>

The ip address.

=item B<memdecfg>={I<configure|deconfigure>:I<processingunit>:I<unit|bank>:I<id,...>}

Select whether each memory bank should be enabled or disabled. State changes take effect on the next platform boot.

=item B<netmask>

The subnet mask.

=item B<network>={[I<ip>],[I<host>],[I<gateway>],[I<netmask>]|*}

Get or set the MPA network parameters. If '*' is specified, all parameters are read from the xCAT database.

=item B<nonred>

Allows loss of redundancy.

=item B<ntp>={[I<ntpenable>],[I<ntpserver>],[I<frequency>],[I<v3>]}

Get or set the MPA Network Time Protocol (NTP) parameters. 

=item B<ntpenable>

Enable or disable NTP (enable|disable).

=item B<ntpserver>

Get or set NTP server IP address or name.

=item B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}

Power Domain 1 - determines how an MPA responds to a loss of redundant power.

=item B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}

Power Domain 2 - determines how an MPA responds to a loss of redundant power.

=item B<procdecfg>={I<configure|deconfigure>:I<processingunit>:I<id,...>}

Selects whether each processor should be enabled or disabled. State changes take effect on the next platform boot.

=item B<redwoperf>

Prevents components from turning on that will cause loss of power redundancy.

=item B<redwperf>

Power throttles components to maintain power redundancy and prevents components from turning on that will cause loss of power redundancy.

=item B<snmpcfg>={I<enable>|I<disable>}

Enable or disable SNMP on MPA.

=item B<snmpdest>=I<snmpmanager-IP>

Get or set where the SNMP alerts should be sent to.

=item B<spdump>

Performs a service processor dump. 

=item B<sshcfg>={I<enable>|I<disable>}

Enable or disable SSH on MPA.

=item B<swnet>={[I<ip>],[I<gateway>],[I<netmask>]}

Set the Switch network parameters.

=item B<sysdump>

Performs a system dump. 

=item B<time>={I<hh:mm:ss>}

Enter the current time in UTC (Coordinated Universal Time) format.

=item B<v3>

Enable or disable v3 authentication (enable|disable).

=item B<-h>|B<--help>

Prints out a brief usage message.

=item B<-v>, B<--version>

Display the version number.

=back


=head1 EXAMPLES

=over 3

=item *

To turn on SNMP alerts for node5:

B<rspconfig> I<node5> B<alert>=B<on>

 node5: Alerts: enabled

=item *

To display the destination setting for SNMP alerts for node4:

B<rspconfig> I<node4 snmpdest>

 node4: BMC SNMP Destination 1: 9.114.47.227

=item *

To display the MPA network parameters for mm01:

B<rspconfig> I<mm01 network>

 mm01: MM IP: 192.168.1.47 
 mm01: MM Hostname: MM001125C31F28 
 mm01: Gateway: 192.168.1.254  
 mm01: Subnet Mask: 255.255.255.224 

=item *

To change the MPA network parameters with the values in the xCAT database for mm01:

B<rspconfig> I<mm01 network=*>

 mm01: MM IP: 192.168.1.47 
 mm01: MM Hostname: mm01 
 mm01: Gateway: 192.168.1.254  
 mm01: Subnet Mask: 255.255.255.224 

=item *

To change only the gateway parameter for the MPA network mm01:

B<rspconfig> I<mm01 network=,,192.168.1.1,>

 mm01: Gateway: 192.168.1.1  

=item *

To get the current power redundancy mode for power domain 1 on mm01:

B<rspconfig> I<mm01 pd1>

 mm01: Redundant without performance impact  

=item *

To change the current power redundancy mode for power domain 1 on mm01 to non-redundant:

B<rspconfig> I<mm01 pd1=nonred>

 mm01: nonred  

=item *

To enable NTP with an NTP server address of 192.168.1.1, an update frequency of 90 minutes, and with v3 authentication enabled on mm01:

B<rspconfig> I<mm01 ntp=enable,192.168.1.1,90,enable>

 mm01: NTP: disabled  
 mm01: NTP Server: 192.168.1.1  
 mm01: NTP: 90 (minutes)  
 mm01: NTP: enabled  

=item *

To disable NTP v3 authentication only on mm01:

B<rspconfig> I<mm01 ntp=,,,disable>

 mm01: NTP v3: disabled  

=item *

To disable Predictive Failure and L2 Failure deconfiguration policies on mm01:

B<rspconfig> I<mm01 decfg=disable:predictive,L3>

 mm01: Success  

=item *

To deconfigure processors 4 and 5 of Processing Unit 0 on mm01:

B<rspconfig> I<mm01 procedecfg=deconfigure:0:4,5>

 mm01: Success  

=item *

To deconfigure memory bank 9 and 10 of Processing Unit 0 on mm01:

B<rspconfig> I<mm01 memdecfg=deconfigure:bank:0:9,10>

 mm01: Success  

=back


=head1 SEE ALSO

noderange(3), rpower(1), rcons(1), rinv(1), rvitals(1), rscan(1)