#!/bin/ksh ########################################################################### # # The configCECs script is written in ksh, and used to create a full # system partition for each CECs Managed by the HMC. It will use ssh to # login the HMC with the hscroot userid in order to rename the CECs based # on a certain pattern specified through command line and create full # partition for all the CECs. # Command Syntax: # configCECs -H hmc_list [-c cec_format] [-l lpar_format] [-p profile_format] # [--frame_pad_len len_number] [--node_pad_len len_number] # [--cage_pad_len len_number] # [--allocate_type always_all | always_list | conditional] # [--exclude_hw ] # [-h] # # -H hmc_list # Specifies a comma-separated list of HMC host names, IP addresses to configure CECs on. # -c cec_format # Specifies the naming format for CEC, the default format is f%Fn%N_SN%S. # -l lpar_format # Specifies the naming format for LPAR, the default format is f%Fn%N. # -p profile_format # Specifies the naming format for profile, the default format is the same with lpar_format. # --frame_pad_len len_number # Specifies the number of digits used for the frame numbers, it will be zero filled if # needed. The default value is no padding. # --node_pad_len len_number # Specifies the number of digits used for the node numbers, it will be zero filled if # needed. The default value is no padding. # --cage_pad_len len_number # Specifies the number of digits used for the cage numbers, it will be zero filled if # needed. The default value is no padding. # --allocate_type # Specifies the allocation method that is used to allocate resources to full system # partition. The supported allocation methods are always_all, always_list and conditional. # The default method is always_all. always_all indicates to always use the 'all resources' # LPAR flag; always_list indicates to always explicitly list the devices in the LPAR; and # conditional indicates to use the 'all resources' LPAR flag if not --exclude_hw is found, # otherwise use an explicit list for the hardware. # --exclude_hw # Specifies a comma-separated list of hardware names or 'device id's that do not need to # assign. The supported hardware names are RIO and 10G, RIO indicates Galaxy 1 HCA used # for RIO connection in IH nodes; 10G indicates 2-port 10G integrated adapter in IH nodes. # It can only be used with --allocate_type is always_list or conditional. # -h Display usage information. ########################################################################### ########################################################################### # # # Setup default values for the script's variables. Some of these might # # be overwritten by the commmand line arguments. # # # ########################################################################### CEC_FILE="/tmp/Rename_cecs" LPAR_FILE="/tmp/Build_lpars" CECFORMAT="f%Fn%N_SN%S" LPARFORMAT="f%Fn%N" PROFFORMAT="" NODE_PAD_LENGTH=0 # A value of '0' means no padding FRAME_PAD_LENGTH=0 # A value of '0' means no padding CAGE_PAD_LENGTH=0 # A value of '0' means no padding ALLOCATE_TYPE="always_all" COMM_LPAR_INFO_AR="lpar_id=1,lpar_env=aixlinux,all_resources=1,boot_mode=norm,conn_monitoring=0" #For "all resources" COMM_LPAR_INFO_LS="lpar_id=1,lpar_env=aixlinux,boot_mode=norm,conn_monitoring=0,proc_mode=ded,sharing_mode=keep_idle_procs" NEW_LPAR_ID='1' FULLPATH='NO' NEWLINE=' ' HAVE_PROCESSED_CAGE="" ########################################################################### # # # usage for configCECs # # # ########################################################################### usage() { echo "Usage: configCECs -H hmc_list [-c cec_format] [-l lpar_format] [-p profile_format] [--frame_pad_len len_number] [--node_pad_len len_number] [--cage_pad_len len_number] [--allocate_type always_all | always_list | conditional] [--exclude_hw ] [-h] -H hmc_list Specifies a comma-separated list of HMC host names, IP addresses to configure CECs on. -c cec_format Specifies the naming format for CEC, the default format is f%Fn%N_SN%S. -l lpar_format Specifies the naming format for LPAR, the default format is f%Fn%N. -p profile_format Specifies the naming format for profile, the default format is the same with lpar_format. --frame_pad_len len_number Specifies the number of digits used for the frame numbers, it will be zero filled if needed. The default value is no padding. --node_pad_len len_number Specifies the number of digits used for the node numbers, it will be zero filled if needed. The default value is no padding. --cage_pad_len len_number Specifies the number of digits used for the cage numbers, it will be zero filled if needed. The default value is no padding. --allocate_type Specifies the allocation method that is used to allocate resources to full system partition. The supported allocation methods are always_all, always_list and conditional. The default method is always_all. always_all indicates to always use the 'all resources' LPAR flag; always_list indicates to always explicitly list the devices in the LPAR; and conditional indicates to use the 'all resources' LPAR flag if not --exclude_hw is found, otherwise use an explicit list for the hardware. --exclude_hw Specifies a comma-separated list of hardware names or 'device id's that do not need to assign. The supported hardware names are RIO and 10G, RIO indicates Galaxy 1 HCA used for RIO connection in IH nodes; 10G indicates 2-port 10G integrated adapter in IH nodes. It can only be used with --allocate_type is always_list or conditional. -h Display usage information." } ############################################################################ # # # List all resources and exclude the resources indicated by '--exclude_hw' # # # ############################################################################ lsres() { EXCLUDE_HW=`echo $EXCLUDE_HW | sed "s/,/\|/g"` ########################################################### # # # Get the details of any HCAs in the CEC while skipping # # the Galaxy 1 adapter for the RIO (adapter_id of # # 230015ff). When allocate a HCA, a GUID is needed. First # # we try to extract this GUID from unassigned_guids # # attibute. If the unassigned_guids is null, we will try # # to extract this GUID from assigned_guids attibute. If # # this two attribute are both null, an error message will # # will be printed to indicate this device can be # # allocated. # # # ########################################################### HCA_STRING="" HCA_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r hca --level sys -F adapter_id:unassigned_guids:assigned_guids -m $CEC_NAME" TMP_HCA_LIST=`$HCA_LIST_CMD` SAVEIFS="$IFS" IFS="$NEWLINE" set -A HCA_LIST $TMP_HCA_LIST IFS="$SAVEIFS" H_INDEX=0 if [[ $HCA_LIST != "No results were found." ]]; then while (($H_INDEX < ${#HCA_LIST[*]})); do ADAPTER_ID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f1` UNASSIGNED_GUID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f2` ASSIGNED_GUID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f3` IS_EXCLUDED=`echo "$EXCLUDE_HW" | grep -q "$ADAPTER_ID" && echo yes || echo no` if [[ $IS_EXCLUDED == "yes" ]]; then ((H_INDEX=$H_INDEX+1)) continue fi if [[ "$UNASSIGNED_GUID" != "" && "$UNASSIGNED_GUID" != "none" ]]; then GUID=`echo $UNASSIGNED_GUID | cut -d ',' -f1` else if [[ "$ASSIGNED_GUID" != "" && "$ASSIGNED_GUID" != "none" ]]; then GUID=`echo $ASSIGNED_GUID | cut -d ',' -f1` else echo " ERROR: The device $ADAPTER_ID could not be allocated." ((H_INDEX=$H_INDEX+1)) continue fi fi if [[ $HCA_STRING == "" ]]; then HCA_STRING=$ADAPTER_ID'/'$GUID'/4' else HCA_STRING=${HCA_STRING}','$ADAPTER_ID'/'$GUID'/4' fi ((H_INDEX=$H_INDEX+1)) done if [[ "${HCA_STRING}" != '' ]]; then HCA_STRING=',\\\\\"hca_adapters='${HCA_STRING}'\\\\\"' fi fi ########################################################### # # # Get the location of all the I/O slots. # # # ########################################################### IO_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r io --rsubtype slot -F drc_index -m $CEC_NAME" if [[ $EXCLUDE_HW != '' ]]; then IO_LIST_CMD=${IO_LIST_CMD}" | egrep -v \"$EXCLUDE_HW\"" fi set -A IO_LIST `$IO_LIST_CMD` I_INDEX=0 if [[ $IO_LIST != "No" ]]; then while (($I_INDEX < ${#IO_LIST[*]})); do if [[ $I_INDEX == "0" ]]; then IO_STRING=${IO_LIST[$I_INDEX]}'//0' else IO_STRING=${IO_STRING}','${IO_LIST[$I_INDEX]}'//0' fi ((I_INDEX=$I_INDEX+1)) done if [[ "${IO_STRING}" != '' ]]; then IO_STRING=',\\\\\"io_slots='${IO_STRING}'\\\\\"' fi fi ########################################################### # # # Get the info on the HEAs in the CEC. # # # ########################################################### HEA_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r hea --rsubtype phys --level port -F adapter_id/port_group/phys_port_id/log_port_ids -m $CEC_NAME" set -A HEA_LIST `$HEA_LIST_CMD` IS_EXCLUDED=`echo "$EXCLUDE_HW" | grep -q "2300000c" && echo yes || echo no` if [[ $HEA_LIST != "No" ]]; then if [[ ${#HEA_LIST[*]} = '4' || $IS_EXCLUDED == "yes" ]]; then HEA_STRING='23000014/2/0/1/,23000014/2/1/2/,23000014/1/0/1/,23000014/1/1/2/' else HEA_STRING='23000014/2/0/1/,23000014/2/1/2/,23000014/1/0/1/,23000014/1/1/2/,2300000c/2/0/1/,2300000c/1/0/1/' fi HEA_STRING=',\\\\\"lhea_logical_ports='${HEA_STRING}'\\\\\"' fi ########################################################### # # # Get the maximum installed memory. # # # ########################################################### MAX_MEM=`ssh hscroot@$HMC $LSHWRES -r mem --level sys -F installed_sys_mem -m $CEC_NAME` MEM_STRING=',min_mem=4096,desired_mem='$MAX_MEM',max_mem='$MAX_MEM ########################################################### # # # Get the maximum installed CPUs. # # # ########################################################### MAX_CPU=`ssh hscroot@$HMC $LSHWRES -r proc --level sys -F installed_sys_proc_units -m $CEC_NAME` MAX_CPU=`echo $MAX_CPU | sed -e 's/\.0$//'` CPU_STRING=',min_procs=1,desired_procs='$MAX_CPU',max_procs='$MAX_CPU } ########################################################################### # # # Parse/validate the commmand line arguments. # # # ########################################################################### OS=`uname` if [[ "$OS" == "AIX" ]]; then #The getopt on AIX doesn't support long options ALLARGS=$* ALLARGS=`echo $ALLARGS | sed -e 's/ --frame_pad_len/ -F/'` ALLARGS=`echo $ALLARGS | sed -e 's/ --node_pad_len/ -N/'` ALLARGS=`echo $ALLARGS | sed -e 's/ --cage_pad_len/ -G/'` ALLARGS=`echo $ALLARGS | sed -e 's/ --allocate_type/ -A/'` ALLARGS=`echo $ALLARGS | sed -e 's/ --exclude_hw/ -E/'` echo "$ALLARGS" | grep " --" 2>&1 >/dev/null if [ $? -eq 0 ]; then strerr="Invalid options" echo "$strerr" >&2 usage exit 1 fi args=`getopt H:c:l:p:hF:N:G:A:E: $ALLARGS 2>&1` if [ $? -gt 0 ]; then strerr="Invalid options" echo "$strerr" >&2 usage exit 1 fi args=`echo $args | sed -e 's/ -F/ --frame_pad_len/'` args=`echo $args | sed -e 's/ -N/ --node_pad_len/'` args=`echo $args | sed -e 's/ -G/ --cage_pad_len/'` args=`echo $args | sed -e 's/ -A/ --allocate_type/'` args=`echo $args | sed -e 's/ -E/ --exclude_hw/'` elif [[ "$OS" == "Linux" ]]; then args=`getopt -u -l frame_pad_len:,node_pad_len:,cage_pad_len:,allocate_type:,exclude_hw: H:c:l:p:h $*` if [ $? -gt 0 ]; then strerr="Invalid options" echo "$strerr" >&2 usage exit 1 fi else echo "The system $OS is not supported." exit 1 fi set -- $args for i in $args; do case $i in -H) shift; HMC_LIST=$1; shift;; -c) shift; CECFORMAT=$1; shift;; -l) shift; LPARFORMAT=$1; shift;; -p) shift; PROFFORMAT=$1; shift;; --frame_pad_len) shift; FRAME_PAD_LENGTH=$1; if [[ `echo "$FRAME_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then echo "The parameter of --frame_pad_len should be an integer." usage exit 1 fi typeset -RZ${FRAME_PAD_LENGTH} F_NUM; shift ;; --node_pad_len) shift; NODE_PAD_LENGTH=$1; if [[ `echo "$NODE_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then echo "The parameter of --node_pad_len should be an integer." usage exit 1 fi typeset -RZ${NODE_PAD_LENGTH} N_NUM; shift;; --cage_pad_len) shift; CAGE_PAD_LENGTH=$1; if [[ `echo "$CAGE_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then echo "The parameter of --cage_pad_len should be an integer." usage exit 1 fi typeset -RZ${CAGE_PAD_LENGTH} CAGE_NUM; shift;; --allocate_type) shift; ALLOCATE_TYPE=$1; shift;; --exclude_hw) shift; EXCLUDE_HW=$1; shift;; -h) shift usage exit 0 ;; esac done if [[ "$HMC_LIST" == '' ]]; then echo "There is no HMC specified. Please use -H to specify HMC." usage exit 1 fi if [[ "$ALLOCATE_TYPE" != "always_all" ]] && [[ "$ALLOCATE_TYPE" != "always_list" ]] && [[ "$ALLOCATE_TYPE" != "conditional" ]]; then echo "The parameter of --allocate_type is incorrect." usage exit 1 fi if [[ "$ALLOCATE_TYPE" == "always_all" ]] && [[ "$EXCLUDE_HW" != '' ]]; then echo "The flag --exclude_hw can only be used with --allocate_type is always_list or conditional." usage exit 1 fi if [[ "$ALLOCATE_TYPE" == "conditional" ]] && [[ "$EXCLUDE_HW" != '' ]]; then ALLOCATE_TYPE="always_list" fi if [[ "$ALLOCATE_TYPE" == "conditional" ]] && [[ "$EXCLUDE_HW" == '' ]]; then ALLOCATE_TYPE="always_all" fi if [[ "$EXCLUDE_HW" != '' ]]; then EXCLUDE_HW=`echo $EXCLUDE_HW | awk -F, '{ for (i=1;i<=NF;i++){ if($i=="RIO") $i="230015ff"; if($i=="10G") $i="2300000c"; } print $0 }'` EXCLUDE_HW=`echo $EXCLUDE_HW | sed "s/ /,/g"` fi ########################################################################### # # # Remove any old output files from previous runs of this script. # # # ########################################################################### rm -r $CEC_FILE >/dev/null 2>&1 rm -r $LPAR_FILE >/dev/null 2>&1 ########################################################################### # # # Add the full pathname to the HMC commands if needed. # # # ########################################################################### if [[ "$FULLPATH" == "YES" ]]; then HMCPATH='/opt/hsc/bin/' else HMCPATH='' fi LSSYSCFG=${HMCPATH}'lssyscfg' MKSYSCFG=${HMCPATH}'mksyscfg' CHSYSCFG=${HMCPATH}'chsyscfg' RMSYSCFG=${HMCPATH}'rmsyscfg' LSHWRES=${HMCPATH}'lshwres' ########################################################################### # # # Main loop: For the given HMC ($HMC) list all it's frames. For each # # frame display the contents of it's cages to find it's CECs. Then for # # each CEC build the HMC commands to name the CEC and build the LPAR. # # The HMC commands are written to the two output files ($CEC_FILE and # # $LPAR_FILE). # # # ########################################################################### HMC_LIST=`echo $HMC_LIST | sed "s/,/ /g"` for HMC in $HMC_LIST; do echo "Checking HMC $HMC......" SAVEIFS="$IFS" IFS="$NEWLINE" set -A ALLFRAMES `ssh hscroot@$HMC $LSSYSCFG -r frame -F name,frame_num,serial_num,state` IFS="$SAVEIFS" if [[ ${#ALLFRAMES[*]} == "0" ]]; then echo 'ERROR: NO FRAMES WERE FOUND ON HMC' "$HMC" continue fi F_INDEX=0 while (($F_INDEX < ${#ALLFRAMES[*]})); do SAVEIFS="$IFS" IFS=',' set -A FRAMELINE ${ALLFRAMES[$F_INDEX]} IFS="$SAVEIFS" F_NAME="${FRAMELINE[0]}" F_NUM="${FRAMELINE[1]}" F_SN="${FRAMELINE[2]}" F_STATE="${FRAMELINE[3]}" ################################################################### # # # Check if the frame number is invalid (0 or non-numeric). # # # ################################################################### if [[ "$F_NAME" == "No results were found." ]]; then echo 'ERROR: NO FRAMES WERE FOUND ON HMC' "$HMC" break fi if [[ "$F_NUM" == "0" || `echo "$F_NUM" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then echo 'ERROR: Invalid Frame number for frame' "$F_NAME"":" "$F_NUM" ((F_INDEX=$F_INDEX+1)) continue fi ################################################################### # # # Check if at least one BPA is in the 'Standby' state. # # # ################################################################### if [[ `echo $F_STATE | grep -sq Standby ; echo $?` != "0" ]]; then echo 'ERROR: Frame' "$F_NAME" 'is in incorrect state -' $F_STATE ((F_INDEX=$F_INDEX+1)) continue fi ################################################################### # # # List the contents of each cage in the current frame using the # # 'lssyscfg -r cage' command and loop through each one to find the# # CECs. # # # ################################################################### N_NUM=0 SAVEIFS="$IFS" IFS="$NEWLINE" set -A ALLCAGES `ssh hscroot@$HMC $LSSYSCFG -r cage -e "$F_NAME" -F cage_num,contents,type_model_serial_num,loc_code,owner | sort -n` IFS="$SAVEIFS" CAGE_INDEX=0 while (($CAGE_INDEX < ${#ALLCAGES[*]})); do SAVEIFS="$IFS" IFS=',' set -A CAGELINE ${ALLCAGES[$CAGE_INDEX]} IFS="$SAVEIFS" CAGE_NUM="${CAGELINE[0]}" CAGE_CONTENTS="${CAGELINE[1]}" CAGE_TYPE_MODEL_SN="${CAGELINE[2]}" CAGE_LOC_CODE="${CAGELINE[3]}" CAGE_OWNER="${CAGELINE[4]}" if [[ "$CAGE_NUM" == "No results were found." ]]; then echo 'ERROR: NO CAGES WERE FOUND ON FRAME' "$F_NAME" break fi case $CAGE_CONTENTS in io) ;; ## Ignore RIO drawer 48) ;; ## Ignore Federation switch board sys) ########################################################### # # # For each CEC found validate that the frame was able to # # read it's MTMS correctly. The MTMS is the only common # # piece of data between the 'lssyscfg -r cage' and # # 'lssyscfg -r sys' commands. So, if the MTMS is invalid # # skip over this CEC since will not be able to find it in # # the 'lssyscfg -r sys' command output. The MTMS must be # # split in 2 since 'lssyscfg -r sys' uses different fields# # for the Model/Type and the Serial Number. # # # ########################################################### echo "Frame $F_NUM Cage $CAGE_NUM contains CEC $CAGE_TYPE_MODEL_SN" N_NUM=$((${N_NUM} + 1)) if [[ "$CAGE_TYPE_MODEL_SN" == "No-TMS*Data!!!" ]]; then echo " ERROR: Bad Type-Model-SN data:" "$CAGE_TYPE_MODEL_SN" else CAGE_TYPE_MODEL=`echo $CAGE_TYPE_MODEL_SN |cut -d '*' -f1` CAGE_SN=`echo $CAGE_TYPE_MODEL_SN | cut -d '*' -f2` for PREVCAGE in $HAVE_PROCESSED_CAGE; do if [[ "$PREVCAGE" == "${CAGE_TYPE_MODEL}:${CAGE_SN}" ]]; then PROCESSED=1 break fi PROCESSED=0 done if [[ $PROCESSED == 1 ]]; then echo " ERROR: ${CAGE_TYPE_MODEL}:${CAGE_SN} has already been processed." ((CAGE_INDEX=$CAGE_INDEX+1)) continue fi HAVE_PROCESSED_CAGE="${HAVE_PROCESSED_CAGE}${CAGE_TYPE_MODEL}:${CAGE_SN} " ####################################################### # # # List all the CECs on this HMC and grep for the MTMS # # that was found for the CEC in this cage. If it is # # not found or not an IH p5 then skip over this CEC. # # # ####################################################### CEC_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r sys -F name:state:power_off_policy:service_lpar_id:type_model:serial_num | grep "${CAGE_TYPE_MODEL}:${CAGE_SN}$"` SAVE_RC=$? if [[ "$SAVE_RC" != "0" ]]; then echo " ERROR: Could not find System $CAGE_TYPE_MODEL $CAGE_SN on this HMC" else ################################################### # # # Save the detail data of this CEC. # # # ################################################### CEC_NAME=`echo "$CEC_ENTRY" | cut -d ':' -f1` CEC_STATE=`echo "$CEC_ENTRY" | cut -d ':' -f2` CEC_POWER_POLICY=`echo "$CEC_ENTRY" | cut -d ':' -f3` CEC_SERV_LPAR_ID=`echo "$CEC_ENTRY" | cut -d ':' -f4` CEC_TYPE_MODEL=`echo "$CEC_ENTRY" | cut -d ':' -f5` CEC_SN=`echo "$CEC_ENTRY" | cut -d ':' -f6` ################################################### # # # Format the new CEC name. # # # ################################################### CEC_NEW_NAME='' PERCENT='no' for i in `echo $CECFORMAT | sed -e 's/./& /g'`; do if [[ $i = '%' && $PERCENT = 'no' ]]; then PERCENT='yes' else if [[ $PERCENT = 'yes' ]]; then case $i in F) CEC_NEW_NAME=${CEC_NEW_NAME}${F_NUM} ;; N) CEC_NEW_NAME=${CEC_NEW_NAME}${N_NUM} ;; S) CEC_NEW_NAME=${CEC_NEW_NAME}${CEC_SN} ;; C) CEC_NEW_NAME=${CEC_NEW_NAME}${CAGE_NUM} ;; %) CEC_NEW_NAME=${CEC_NEW_NAME}${i} ;; *) echo "Ignoring Invalid character "${i}" after a '%'." ;; esac PERCENT='no' else CEC_NEW_NAME=${CEC_NEW_NAME}${i} fi fi done ################################################### # # # If the current CEC name needs to be changed then# # build the 'chsyscfg' command and append it to # # the file. # # ################################################### if [[ "$CEC_NAME" == "$CEC_NEW_NAME" ]]; then echo " INFO: CEC NAME ($CEC_NAME) IS CORRECT." else echo " CHANGE: OLD CEC NAME:" "$CEC_NAME""." "NEW CEC NAME:" "$CEC_NEW_NAME""." echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NAME -i \"new_name=$CEC_NEW_NAME\"" >> $CEC_FILE fi ################################################### # # # Check if the CEC is powered up. If it isn't we # # have to skip over it since it needs to be up to # # do anything else other then changing the CEC # # name. # # # ################################################### if [[ "$CEC_STATE" == "Standby" || "$CEC_STATE" == "Operating" ]]; then ############################################### # # # Make sure the CEC power off policy is set to# # 1. This prevents the CEC from being powered # # off when the last LPAR is shutdown. # # # ############################################### if [[ "$CEC_POWER_POLICY" == "1" ]]; then echo " INFO: CEC POWER OFF POLICY IS SET OK ($CEC_POWER_POLICY)." else echo " CHANGE: CEC POWER OFF POLICY IS SET WRONG ($CEC_POWER_POLICY)." echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NAME -i \"power_off_policy=1\"" >> $CEC_FILE fi ############################################### # # # Format the new LPAR name. # # # ############################################### LPAR_NAME='' PERCENT='no' for i in `echo $LPARFORMAT | sed -e 's/./& /g'`; do if [[ $i = '%' && $PERCENT = 'no' ]]; then PERCENT='yes' else if [[ $PERCENT = 'yes' ]]; then case $i in F) LPAR_NAME=${LPAR_NAME}${F_NUM} ;; N) LPAR_NAME=${LPAR_NAME}${N_NUM} ;; S) LPAR_NAME=${LPAR_NAME}${CEC_SN} ;; C) LPAR_NAME=${LPAR_NAME}${CAGE_NUM} ;; %) LPAR_NAME=${LPAR_NAME}${i} ;; *) echo "Ignoring Invalid character "${i}" after a '%'." ;; esac PERCENT='no' else LPAR_NAME=${LPAR_NAME}${i} fi fi done ############################################### # # # Format the new Profile name. # # # ############################################### if [[ "$PROFFORMAT" == '' ]]; then PROF_NAME=$LPAR_NAME else PROF_NAME='' PERCENT='no' for i in `echo $PROFFORMAT | sed -e 's/./& /g'`; do if [[ $i = '%' && $PERCENT = 'no' ]]; then PERCENT='yes' else if [[ $PERCENT = 'yes' ]]; then case $i in F) PROF_NAME=${PROF_NAME}${F_NUM} ;; N) PROF_NAME=${PROF_NAME}${N_NUM} ;; S) PROF_NAME=${PROF_NAME}${CEC_SN} ;; C) PROF_NAME=${PROF_NAME}${CAGE_NUM} ;; %) PROF_NAME=${PROF_NAME}${i} ;; *) echo "Ignoring Invalid character "${i}" after a '%'." ;; esac PERCENT='no' else PROF_NAME=${PROF_NAME}${i} fi fi done fi ############################################### # # # Check if an LPAR with this name already # # exists on this CEC. # # # ############################################### LPAR_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r lpar -m $CEC_NAME -F name:lpar_id:state --filter "lpar_names=$LPAR_NAME" ` LPAR_ENTRY_RC="$?" if [[ "$LPAR_ENTRY_RC" == "0" ]]; then ########################################### # # # An LPAR with the this name exists. Now # # check if the LPAR ID and the profile are# # also correct. # # # ########################################### LPAR_ID=`echo "$LPAR_ENTRY" |cut -d ':' -f2` LPAR_STATE=`echo "$LPAR_ENTRY" |cut -d ':' -f3` if [[ "$LPAR_ID" == "$NEW_LPAR_ID" ]]; then echo " INFO: LPAR $LPAR_NAME IS ALREADY CONFIGURED AS ID 1" if [[ "$CEC_SERV_LPAR_ID" == "$NEW_LPAR_ID" ]]; then echo " INFO: SERVICE LPAR ID IS SET OK ($CEC_SERV_LPAR_ID)." else echo " CHANGE: SERVICE LPAR ID IS SET WRONG ($CEC_SERV_LPAR_ID)." echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $CEC_FILE fi else echo " ERROR: LPAR $LPAR_NAME IS CONFIGURED AS ID $LPAR_ID" fi else ########################################### # # # There is no existing LPAR with the # # requested name. # # Now verify there is no existing LPAR # # with the requested LPAR ID#. # # # ########################################### LPAR_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r lpar -m $CEC_NAME -F name:lpar_id:state --filter "lpar_ids=$NEW_LPAR_ID" ` LPAR_ENTRY_RC="$?" LPAR_INFO='' if [[ "$ALLOCATE_TYPE" == "always_all" ]]; then LPAR_INFO=${COMM_LPAR_INFO_AR} else lsres LPAR_INFO=${COMM_LPAR_INFO_LS}${CPU_STRING}${MEM_STRING}${IO_STRING}${HEA_STRING}${HCA_STRING} fi if [[ "$LPAR_ENTRY_RC" == "0" ]]; then ####################################### # # # An existing LPAR with the requested # # LPAR ID# (but different LPAR name) # # was found. # # # ####################################### echo " CHANGE: REMOVE LPAR ID $NEW_LPAR_ID" echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=none\"" >> $LPAR_FILE echo "ssh hscroot@$HMC $RMSYSCFG -r lpar -m $CEC_NEW_NAME --id $NEW_LPAR_ID" >> $LPAR_FILE CONFIG_DATA="name=${LPAR_NAME},profile_name=${PROF_NAME},${LPAR_INFO}" echo " CHANGE: CREATE LPAR $LPAR_NAME as LPAR ID 1" echo "ssh hscroot@$HMC $MKSYSCFG -r lpar -m $CEC_NEW_NAME -i \"$CONFIG_DATA\"" >> $LPAR_FILE echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $LPAR_FILE else CONFIG_DATA="name=${LPAR_NAME},profile_name=${PROF_NAME},${LPAR_INFO}" echo " CHANGE: CREATE LPAR $LPAR_NAME as LPAR ID 1" echo "ssh hscroot@$HMC $MKSYSCFG -r lpar -m $CEC_NEW_NAME -i \"$CONFIG_DATA\"" >> $LPAR_FILE echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $LPAR_FILE fi fi else echo " ERROR: CEC NOT POWERED UP. STATE IS: $CEC_STATE" fi fi fi ;; none) ;; ## Ignore empty cage in the frame *) echo " ERROR: Unknown device in cage" $CAGE_NUM ;; esac ((CAGE_INDEX=$CAGE_INDEX+1)) done ((F_INDEX=$F_INDEX+1)) done done chmod u+x $CEC_FILE >/dev/null 2>&1 chmod u+x $LPAR_FILE >/dev/null 2>&1