/**
* Execute when the DOM is fully loaded
*/
$(document).ready(function() {
// Load utility scripts (if any)
});
/**
* Constructor
*
* @return Nothing
*/
var ipmiPlugin = function() {
};
/**
* Steps for hardware discovery wizard
*
* @return Discovery steps
*/
ipmiPlugin.prototype.getStep = function(){
return ['Basic patterns', 'Switches', 'Network', 'Services', 'Power on hardware'];
};
/**
* return steps's init function for hardware discovery wizard
*
* @return Nothing
*/
ipmiPlugin.prototype.getInitFunction = function(){
return [idataplexInitBasic, idataplexInitSwitch, idataplexInitNetwork, idataplexInitService, idataplexInitPowerOn];
};
ipmiPlugin.prototype.getNextFunction = function(){
return [idataplexCheckBasic, undefined, idataplexCheckNetwork, undefined, undefined];
};
/**
* Clone node (service page)
*
* @param node
* Node to clone
* @return Nothing
*/
ipmiPlugin.prototype.serviceClone = function(node) {
};
/**
* Load provision page (service page)
*
* @param tabId
* Tab ID where page will reside
* @return Nothing
*/
ipmiPlugin.prototype.loadServiceProvisionPage = function(tabId) {
};
/**
* Show node inventory (service page)
*
* @param data
* Data from HTTP request
* @return Nothing
*/
ipmiPlugin.prototype.loadServiceInventory = function(data) {
};
/**
* Load node inventory
*
* @param data
* Data from HTTP request
* @return Nothing
*/
ipmiPlugin.prototype.loadInventory = function(data) {
var args = data.msg.split(',');
var tabId = args[0].replace('out=', '');
var node = args[1].replace('node=', '');
// Get node inventory
var inv = data.rsp;
// Remove loader
$('#' + tabId).find('img').remove();
// Create division to hold inventory
var invDiv = $('<div></div>');
// Create a fieldset
var fieldSet = $('<fieldset></fieldset>');
var legend = $('<legend>Hardware</legend>');
fieldSet.append(legend);
var oList = $('<ol></ol>');
fieldSet.append(oList);
invDiv.append(fieldSet);
// Loop through each line
var item;
for (var k = 0; k < inv.length; k++) {
// Remove node name
var attr = inv[k].replace(node + ': ', '');
attr = jQuery.trim(attr);
// Append attribute to list
item = $('<li></li>');
item.append(attr);
oList.append(item);
}
// Append to inventory form
$('#' + tabId).append(invDiv);
};
/**
* Load clone page
*
* @param node
* Source node to clone
* @return Nothing
*/
ipmiPlugin.prototype.loadClonePage = function(node) {
// Get nodes tab
var tab = getNodesTab();
var newTabId = node + 'CloneTab';
// If there is no existing clone tab
if (!$('#' + newTabId).length) {
// Create info bar
var infoBar = createInfoBar('Not supported');
// Create clone form
var cloneForm = $('<div class="form"></div>');
cloneForm.append(infoBar);
// Add clone tab
tab.add(newTabId, 'Clone', cloneForm, true);
}
tab.select(newTabId);
};
/**
* Load provision page
*
* @param tabId
* The provision tab ID
* @return Nothing
*/
ipmiPlugin.prototype.loadProvisionPage = function(tabId) {
// Get OS image names
$.ajax( {
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'tabdump',
tgt : '',
args : 'osimage',
msg : ''
},
success : setOSImageCookies
});
// Get groups
$.ajax( {
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'extnoderange',
tgt : '/.*',
args : 'subgroups',
msg : ''
},
success : setGroupsCookies
});
// Get provision tab instance
var inst = tabId.replace('ipmiProvisionTab', '');
// Create provision form
var provForm = $('<div class="form"></div>');
// Create info bar
var infoBar = createInfoBar('Provision an iDataPlex. This will install an operating system onto the iDataPlex.');
provForm.append(infoBar);
// Append to provision tab
$('#' + tabId).append(provForm);
// Create provision existing node division
var provExisting = createIpmiProvisionExisting(inst);
provForm.append(provExisting);
};
/**
* Load resources
*/
ipmiPlugin.prototype.loadResources = function() {
// Get resource tab ID
var tabId = 'ipmiResourceTab';
// Remove loader
$('#' + tabId).find('img').remove();
// Create info bar
var infoBar = createInfoBar('Not yet supported');
// Create resource form
var resrcForm = $('<div class="form"></div>');
resrcForm.append(infoBar);
$('#' + tabId).append(resrcForm);
};
/**
* Add node range
*/
ipmiPlugin.prototype.addNode = function() {
var dialog = $('<div id="addIdplx" class="form"></div>');
var info = createInfoBar('Add a iDataPlex node');
dialog.append(info);
// Create node inputs
dialog.append($('<div><label>Node:</label><input name="node" type="text"/></div>'));
dialog.append($('<div><label>IP address:</label><input name="ip" type="text"/></div>'));
dialog.append($('<div><label>MAC address:</label><input name="mac" type="text"/></div>'));
dialog.append($('<div><label>Groups:</label><input name="groups" type="text"/></div>'));
dialog.dialog({
title: 'Add node',
modal: true,
width: 400,
close: function(){$(this).remove();},
buttons: {
"OK" : function(){addIdataplex();},
"Cancel": function(){$(this).dialog('close');}
}
});
};
/**
* Add iDataPlex node range
*/
function addIdataplex(){
var attr, args;
var errorMessage = '';
// Remove existing warnings
$('#addIdplx .ui-state-error').remove();
// Return input border colors to normal
$('#addIdplx input').css('border', 'solid #BDBDBD 1px');
// Check node attributes
$('#addIdplx input').each(function(){
attr = $(this).val();
if (!attr) {
errorMessage = "Please provide a value for each missing field!";
$(this).css('border', 'solid #FF0000 1px');
}
});
// Show error message (if any)
if (errorMessage) {
$('#addIdplx').prepend(createWarnBar(errorMessage));
return;
}
// Create loader
$('#addIdplx').append(createLoader());
// Change dialog buttons
$('#addIdplx').dialog('option', 'buttons', {
'Close':function(){
$('#addIdplx').dialog('close');
}
});
// Generate chdef arguments
args = '-t;node;-o;' + $('#addIdplx input[name="node"]').val()
+ ';ip=' + $('#addIdplx input[name="ip"]').val()
+ ';mac=' + $('#addIdplx input[name="mac"]').val()
+ ';groups=' + $('#addIdplx input[name="groups"]').val()
+ ';mgt=ipmi;netboot=xnba;nodetype=osi;profile=compute';
$.ajax({
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'chdef',
tgt : '',
args : args,
msg : ''
},
success: function(data) {
// Update /etc/hosts
$.ajax({
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'makehosts',
tgt : '',
args : '',
msg : ''
}
});
// Remove loader
$('#addIdplx img').remove();
// Get return message
var message = '';
for (var i in data.rsp) {
message += data.rsp[i] + '<br/>';
}
// Show return message
if (message)
$('#addIdplx').prepend(createInfoBar(message));
}
});
}
/**
* Create provision existing node division
*
* @param inst
* Provision tab instance
* @return Provision existing node division
*/
function createIpmiProvisionExisting(inst) {
// Create provision existing division
var provExisting = $('<div></div>');
// Create node fieldset
var nodeFS = $('<fieldset></fieldset>');
var nodeLegend = $('<legend>Node</legend>');
nodeFS.append(nodeLegend);
var nodeAttr = $('<div style="display: inline-table; vertical-align: middle; width: 85%; margin-left: 10px;"></div>');
nodeFS.append($('<div style="display: inline-table; vertical-align: middle;"><img src="images/provision/computer.png"></img></div>'));
nodeFS.append(nodeAttr);
// Create image fieldset
var imgFS = $('<fieldset></fieldset>');
var imgLegend = $('<legend>Image</legend>');
imgFS.append(imgLegend);
var imgAttr = $('<div style="display: inline-table; vertical-align: middle;"></div>');
imgFS.append($('<div style="display: inline-table; vertical-align: middle;"><img src="images/provision/operating_system.png"></img></div>'));
imgFS.append(imgAttr);
provExisting.append(nodeFS, imgFS);
// Create group input
var group = $('<div></div>');
var groupLabel = $('<label for="provType">Group:</label>');
group.append(groupLabel);
// Turn on auto complete for group
var dTableDivId = 'ipmiNodesDatatableDIV' + inst; // Division ID where nodes datatable will be appended
var groupNames = $.cookie('groups');
if (groupNames) {
// Split group names into an array
var tmp = groupNames.split(',');
// Create drop down for groups
var groupSelect = $('<select></select>');
groupSelect.append('<option></option>');
for ( var i in tmp) {
// Add group into drop down
var opt = $('<option value="' + tmp[i] + '">' + tmp[i] + '</option>');
groupSelect.append(opt);
}
group.append(groupSelect);
// Create node datatable
groupSelect.change(function() {
// Get group selected
var thisGroup = $(this).val();
// If a valid group is selected
if (thisGroup) {
createNodesDatatable(thisGroup, dTableDivId);
} // End of if (thisGroup)
});
} else {
// If no groups are cookied
var groupInput = $('<input type="text" name="group"/>');
group.append(groupInput);
}
nodeAttr.append(group);
// Create node input
var node = $('<div></div>');
var nodeLabel = $('<label for="nodeName">Nodes:</label>');
var nodeDatatable = $('<div id="' + dTableDivId + '" style="display: inline-block; max-width: 800px;"><p>Select a group to view its nodes</p></div>');
node.append(nodeLabel);
node.append(nodeDatatable);
nodeAttr.append(node);
// Create boot method drop down
var method = $('<div></div>');
var methodLabel = $('<label for="method">Boot method:</label>');
var methodSelect = $('<select id="bootMethod" name="bootMethod"></select>');
methodSelect.append('<option value=""></option>'
+ '<option value="boot">boot</option>'
+ '<option value="install">install</option>'
+ '<option value="iscsiboot">iscsiboot</option>'
+ '<option value="netboot">netboot</option>'
+ '<option value="statelite">statelite</option>'
);
method.append(methodLabel);
method.append(methodSelect);
imgAttr.append(method);
// Create operating system input
var os = $('<div></div>');
var osLabel = $('<label for="os">Operating system:</label>');
var osInput = $('<input type="text" name="os"/>');
osInput.one('focus', function() {
var tmp = $.cookie('osvers');
if (tmp) {
// Turn on auto complete
$(this).autocomplete({
source: tmp.split(',')
});
}
});
os.append(osLabel);
os.append(osInput);
imgAttr.append(os);
// Create architecture input
var arch = $('<div></div>');
var archLabel = $('<label for="arch">Architecture:</label>');
var archInput = $('<input type="text" name="arch"/>');
archInput.one('focus', function() {
var tmp = $.cookie('osarchs');
if (tmp) {
// Turn on auto complete
$(this).autocomplete({
source: tmp.split(',')
});
}
});
arch.append(archLabel);
arch.append(archInput);
imgAttr.append(arch);
// Create profile input
var profile = $('<div></div>');
var profileLabel = $('<label for="profile">Profile:</label>');
var profileInput = $('<input type="text" name="profile"/>');
profileInput.one('focus', function() {
var tmp = $.cookie('profiles');
if (tmp) {
// Turn on auto complete
$(this).autocomplete({
source: tmp.split(',')
});
}
});
profile.append(profileLabel);
profile.append(profileInput);
imgAttr.append(profile);
/**
* Provision existing
*/
var provisionBtn = createButton('Provision');
provisionBtn.bind('click', function(event) {
// Remove any warning messages
$(this).parents('.ui-tabs-panel').find('.ui-state-error').remove();
var ready = true;
var errorMessage = '';
// Get provision tab ID
var thisTabId = 'ipmiProvisionTab' + inst;
// Get nodes that were checked
var dTableId = 'ipmiNodesDatatable' + inst;
var tgts = getNodesChecked(dTableId);
if (!tgts) {
errorMessage += 'You need to select a node. ';
ready = false;
}
// Check booth method
var boot = $('#' + thisTabId + ' select[name=bootMethod]');
if (!boot.val()) {
errorMessage += 'You need to select a boot method. ';
boot.css('border', 'solid #FF0000 1px');
ready = false;
} else {
boot.css('border', 'solid #BDBDBD 1px');
}
// Check operating system image
var os = $('#' + thisTabId + ' input[name=os]');
if (!os.val()) {
errorMessage += 'You need to select a operating system image. ';
os.css('border', 'solid #FF0000 1px');
ready = false;
} else {
os.css('border', 'solid #BDBDBD 1px');
}
// Check architecture
var arch = $('#' + thisTabId + ' input[name=arch]');
if (!arch.val()) {
errorMessage += 'You need to select an architecture. ';
arch.css('border', 'solid #FF0000 1px');
ready = false;
} else {
arch.css('border', 'solid #BDBDBD 1px');
}
// Check profile
var profile = $('#' + thisTabId + ' input[name=profile]');
if (!profile.val()) {
errorMessage += 'You need to select a profile. ';
profile.css('border', 'solid #FF0000 1px');
ready = false;
} else {
profile.css('border', 'solid #BDBDBD 1px');
}
// If all inputs are valid, ready to provision
if (ready) {
// Disable provision button
$(this).attr('disabled', 'true');
// Prepend status bar
var statBar = createStatusBar('ipmiProvisionStatBar' + inst);
statBar.append(createLoader(''));
statBar.prependTo($('#' + thisTabId));
// Disable all inputs
var inputs = $('#' + thisTabId + ' input');
inputs.attr('disabled', 'disabled');
// Disable all selects
var selects = $('#' + thisTabId + ' select');
selects.attr('disabled', 'disabled');
/**
* (1) Set operating system
*/
$.ajax( {
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'nodeadd',
tgt : '',
args : tgts + ';noderes.netboot=xnba;nodetype.os=' + os.val() + ';nodetype.arch=' + arch.val() + ';nodetype.profile=' + profile.val() + ';nodetype.provmethod=' + boot.val(),
msg : 'cmd=nodeadd;out=' + inst
},
success : updateIpmiProvisionExistingStatus
});
} else {
// Show warning message
var warn = createWarnBar(errorMessage);
warn.prependTo($(this).parent().parent());
}
});
provExisting.append(provisionBtn);
return provExisting;
}
/**
* Update the provision existing node status
*
* @param data
* Data returned from HTTP request
* @return Nothing
*/
function updateIpmiProvisionExistingStatus(data) {
// Get ajax response
var rsp = data.rsp;
var args = data.msg.split(';');
// Get command invoked
var cmd = args[0].replace('cmd=', '');
// Get provision tab instance
var inst = args[1].replace('out=', '');
// Get provision tab and status bar ID
var statBarId = 'ipmiProvisionStatBar' + inst;
var tabId = 'ipmiProvisionTab' + inst;
/**
* (2) Remote install
*/
if (cmd == 'nodeadd') {
// Write ajax response to status bar
var prg = writeRsp(rsp, '');
$('#' + statBarId).find('div').append(prg);
// Get parameters
var os = $('#' + tabId + ' input[name="os"]').val();
var profile = $('#' + tabId + ' input[name="profile"]').val();
var arch = $('#' + tabId + ' input[name="arch"]').val();
// Get nodes that were checked
var dTableId = 'ipmiNodesDatatable' + inst;
var tgts = getNodesChecked(dTableId);
// Begin installation
$.ajax( {
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'webrun',
tgt : '',
args : 'rinstall;' + os + ';' + profile + ';' + arch + ';' + tgts,
msg : 'cmd=rinstall;out=' + inst
},
success : updateIpmiProvisionExistingStatus
});
}
/**
* (3) Done
*/
else if (cmd == 'rinstall') {
// Write ajax response to status bar
var prg = writeRsp(rsp, '');
$('#' + statBarId).find('div').append(prg);
$('#' + statBarId).find('img').remove();
// If installation was successful
if (prg.html().indexOf('Error') == -1) {
$('#' + statBarId).find('div').append('<pre>It will take several minutes before the nodes are up and ready. Use nodestat to check the status of the install.</pre>');
}
}
}
/**
* step 2: init the idataplex basic pattern
*
* @param
*
* @return
*/
function idataplexInitBasic(){
var tempip = '';
$('#discoverContentDiv').empty();
$('.tooltip').remove();
var showString = '<div style="min-height:360px" id="patternDiv"><h2>' + steps[currentStep] + '</h2>';
showString += '<table><tbody>';
//nodes title
showString += '<tr><td><h3>Nodes:</h3></td></tr>';
//nodes name range
showString += '<tr><td>Name Range:</td><td><input type="text" title="node[1-167] or node1-node167" ' +
'name="idataplexnodename" value="' + getDiscoverEnv('idataplexnodename') + '"></td>';
//nodes start ip
if (getDiscoverEnv('idataplexnodeip')){
tempip = getDiscoverEnv('idataplexnodeip');
}
else{
tempip = '172.30.20.1';
}
showString += '<td>Start IP:</td><td><input type="text" title="Format: XXX.XXX.XXX.1, last number must be 1.<br/> 172.30.20.1 is suggested." ' +
'name="idataplexnodeip" value="' + tempip + '"></td></tr>';
//num-nodes-per-frame
showString += '<tr><td>Nodes number <br/>per Frame:</td><td><input type="text" title="84: Each frame contains 84 nodes.<br/>Valide Number:20,21,40,41,42,84." '+
'name="idataplexperframe" value="' + getDiscoverEnv('idataplexperframe') + '"></td><td></td><td></td></tr>';
//bmc title
showString += '<tr><td><h3>BMCs:</h3></td></tr>';
//bmc name range
showString += '<tr><td>Name Range:</td><td><input type="text" title="bmc[1-167] or bmc1-bmc167" ' +
'name="idataplexbmcname" value="' + getDiscoverEnv('idataplexbmcname') + '"></td>';
//bmc start ip
if (getDiscoverEnv('idataplexbmcip')){
tempip = getDiscoverEnv('idataplexbmcip');
}
else{
tempip = '172.30.120.1';
}
showString += '<td>Start IP:</td><td><input type="text" title="Format: XXX.XXX.XXX.1, last number must be 1.<br/>172.30.120.1 is suggested." ' +
'name="idataplexbmcip" value="' + tempip + '"></td></tr>';
//switches title
showString += '<tr><td><h3>Switches:</h3></td></tr>';
//switches name range
showString += '<tr><td>Name Range:</td><td><input type="text" title="switch[1-4] or switch1-switch4" ' +
'name="idataplexswitchname" value="' + getDiscoverEnv('idataplexswitchname') + '"></td>';
//switches start ip
if (getDiscoverEnv('idataplexswitchip')){
tempip = getDiscoverEnv('idataplexswitchip');
}
else{
tempip = '172.30.10.1';
}
showString += '<td>Start IP:</td><td><input type="text" title="Format: XXX.XXX.XXX.1, last number must be 1.<br/>172.30.10.1 is suggested." ' +
'name="idataplexswitchip" value="' + tempip + '"></td></tr>';
//nodes per switch
showString += '<tr><td>Nodes number <br/>per Switch:</td><td><input type="text" title="42: Each switch connect 42 nodes.<br/>Valide Number:20,21,40,41,42."' +
'name="idataplexperswitch" value="' + getDiscoverEnv('idataplexperswitch') + '"></td><td></td><td></td></tr>';
showString += '</tbody></table></div>';
$('#discoverContentDiv').append(showString);
$('#discoverContentDiv [title]').tooltip({
position: "center right",
offset: [-2, 10],
effect: "fade",
opacity: 1
});
createDiscoverButtons();
}
/**
* step 2: collect and check the basic pattern input on page.
*
* @param
*
* @return false: the input contains error, can not go to next step
* true : the input are correct, go to the next step
*/
function idataplexCheckBasic(operType){
collectInputValue();
//click back button, do not need check, only collect input value is ok.
if ('back' == operType){
return true;
}
$('#patternDiv .ui-state-error').remove();
var errMessage = '';
var nodename = getDiscoverEnv('idataplexnodename');
var nodeip = getDiscoverEnv('idataplexnodeip');
var bmcname = getDiscoverEnv('idataplexbmcname');
var bmcip = getDiscoverEnv('idataplexbmcip');
var switchname = getDiscoverEnv('idataplexswitchname');
var switchip = getDiscoverEnv('idataplexswitchip');
var nodesperswitch = getDiscoverEnv('idataplexperswitch');
var nodesperframe = getDiscoverEnv('idataplexperframe');
//all fields should input
if (!nodename){
errMessage += 'Input the Nodes name.<br/>';
}
if (!verifyIp(nodeip)){
errMessage += 'Input valid Nodes start ip.<br/>';
}
if (!bmcname){
errMessage += 'Input the BMC name.<br/>';
}
if (!verifyIp(bmcip)){
errMessage += 'Input valid BMC start ip.<br/>';
}
if (!switchname){
errMessage += 'Input the switch name.<br/>';
}
if (!verifyIp(switchip)){
errMessage += 'Input valid switch start ip.<br/>';
}
if (!nodesperswitch){
errMessage += 'Input the nodes number per switch.<br/>';
}
if (!nodesperframe){
errMessage += 'Input the nodes number per frame.<br/>';
}
if ('' != errMessage){
var warnBar = createWarnBar(errMessage);
$('#patternDiv').prepend(warnBar);
return false;
}
//check the relations among nodes, bmcs and switches
var nodeNum = expandNR(nodename).length;
var bmcNum = expandNR(bmcname).length;
var switchNum = expandNR(switchname).length;
var tempNumber = 0;
//nodes number and bmc number
if (nodeNum != bmcNum){
errMessage += 'The number of Node must equal the number of BMC.<br/>';
}
//nodes' number calculate by switches
tempNumber += Number(nodesperswitch) * switchNum;
if (tempNumber < nodeNum){
errMessage += 'Input the node number per switch correctly.<br/>';
}
if ('' != errMessage){
var warnBar = createWarnBar(errMessage);
$('#patternDiv').prepend(warnBar);
return false;
}
return true;
}
/**
* step 3: tell users to configure the switches.
*
* @param
*
* @return
*/
function idataplexInitSwitch(){
$('#discoverContentDiv').empty();
$('.tooltip').remove();
var switchArray = expandNR(getDiscoverEnv('idataplexswitchname'));
var switchIp = getDiscoverEnv('idataplexswitchip');
var showString = '<div style="min-height:360px" id="switchDiv"><h2>' + steps[currentStep] + '</h2>';
showString += '<p>You defined ' + switchArray.length +' switches in last step. Configure them manually please:<br/>';
showString += '<ul><li>1. Start IP address: ' + switchIp + ', and the IPs must be continuous.</li>';
showString += '<li>2. Enable the SNMP agent on switches.</li>';
showString += '<li>3. If you want to use the SNMP V3, the user/password and AuthProto (default is \'md5\') should be set in the switches table.</li>';
showString += '<li>4. Click the next button.</li>';
showString += '</p>';
$('#discoverContentDiv').append(showString);
createDiscoverButtons();
}
/**
* step 4: init the interface and dhcp dynamic range for hardware discovery page.
*
* @param
*
* @return
*/
function idataplexInitNetwork(){
$('#discoverContentDiv').empty();
$('.tooltip').remove();
var startIp = '172.30.200.1';
var endIp = '172.30.255.254';
var showDiv = $('<div style="min-height:360px" id="networkDiv"><h2>' + steps[currentStep] + '</h2>');
var infoBar = createInfoBar('Make sure the discovery NIC\'s IP, start IP addresses and DHCP dynamic IP range are in the same subnet.');
showDiv.append(infoBar);
//init the ip range by input
if (getDiscoverEnv('idataplexIpStart')){
startIp = getDiscoverEnv('idataplexIpStart');
}
if (getDiscoverEnv('idataplexIpEnd')){
endIp = getDiscoverEnv('idataplexIpEnd');
}
var showString = '<table><tbody>';
showString += '<tr><td>DHCP Dynamic Range:</td><td><input type="text" name="idataplexIpStart" value="' + startIp +
'" title="A start Ip address for DHCP dynamic range.<br/>172.30.200.1 is suggested.">-<input type="text" name="idataplexIpEnd" value="' +
endIp + '" title="This IP must larger than start IP, and the range must large than the number of nodes and bmcs.<br/>172.30.255.254 is suggested."></td></tr>';
showString += '</tbody></table>';
showDiv.append(showString);
$('#discoverContentDiv').append(showDiv);
$('#discoverContentDiv [title]').tooltip({
position: "center right",
offset: [-2, 10],
effect: "fade",
opacity: 1
});
createDiscoverButtons();
}
/**
* step 4: check the dynamic range for dhcp
*
* @param
*
* @return
*/
function idataplexCheckNetwork(operType){
collectInputValue();
//click back button, do not need check, only collect input value is ok.
if ('back' == operType){
return true;
}
$('#networkDiv .ui-state-error').remove();
var startIp = getDiscoverEnv('idataplexIpStart');
var endIp = getDiscoverEnv('idataplexIpEnd');
var errMessage = '';
if(!verifyIp(startIp)){
errMessage += 'Input the correct start IP address.<br/>';
}
if(!verifyIp(endIp)){
errMessage += 'Input the correct end IP address.<br/>';
}
if ('' != errMessage){
var warnBar = createWarnBar(errMessage);
$('#networkDiv').prepend(warnBar);
return false;
}
if (ip2Decimal(endIp) <= ip2Decimal(startIp)){
var warnBar = createWarnBar('the end IP must larger than start IP.<br/>');
$('#networkDiv').prepend(warnBar);
return false;
}
return true;
}
/**
* step 5: configure service by xcat command and restart
*
* @param
*
* @return
*/
function idataplexInitService(operType){
$('#discoverContentDiv').empty();
$('.tooltip').remove();
var showStr = '<div style="min-height:360px" id="serviceDiv"><h2>' + steps[currentStep] + '</h2>';
showStr += '<ul>';
showStr += '<li id="fileLine"><span class="ui-icon ui-icon-wrench"></span>Create configure file for xcatsetup.</li>';
showStr += '<li id="setupLine"><span class="ui-icon ui-icon-wrench"></span>Wrote Objects into xCAT database by xcatsetup.</li>';
showStr += '<li id="hostsLine"><span class="ui-icon ui-icon-wrench"></span>Configure Hosts.</li>';
showStr += '<li id="dnsLine"><span class="ui-icon ui-icon-wrench"></span>Configure DNS.</li>';
showStr += '<li id="dhcpLine"><span class="ui-icon ui-icon-wrench"></span>Configure DHCP.</li>';
showStr += '<li id="conserverLine"><span class="ui-icon ui-icon-wrench"></span>Configure Conserver.</li>';
showStr += '</ul>';
showStr += '</div>';
$('#discoverContentDiv').append(showStr);
if ('back' == operType){
createDiscoverButtons();
return;
}
idataplexCreateSetupFile();
}
/**
* step 5: create the stanza file for xcatsetup
*
* @param
*
* @return
*/
function idataplexCreateSetupFile(){
var fileContent = '';
//add the waiting loader on page
$('#fileLine').append(createLoader());
//site
fileContent += "xcat-site:\n" +
" domain = cluster.com\n" +
" cluster-type = idataplex\n";
//xcat-service-lan
fileContent += "xcat-service-lan:\n" +
" dhcp-dynamic-range = " + getDiscoverEnv('idataplexIpStart') + "-" + getDiscoverEnv('idataplexIpEnd') + "\n";
//xcat-switch
fileContent += "xcat-switches:\n" +
" hostname-range = " + getDiscoverEnv('idataplexswitchname') + "\n" +
" starting-ip = " + getDiscoverEnv('idataplexswitchip') + "\n";
//xcat-node
fileContent += "xcat-nodes:\n" +
" hostname-range = " + getDiscoverEnv('idataplexnodename') + "\n" +
" starting-ip = " + getDiscoverEnv('idataplexnodeip') + "\n" +
" num-nodes-per-switch = " + getDiscoverEnv('idataplexperswitch') + "\n" +
" num-nodes-per-frame = " + getDiscoverEnv('idataplexperframe') + "\n";
//xcat-bmc
fileContent += "xcat-bmcs:\n" +
" hostname-range = " + getDiscoverEnv('idataplexbmcname') + "\n" +
" starting-ip = " + getDiscoverEnv('idataplexbmcip') + "\n";
$.ajax({
url : 'lib/systemcmd.php',
dataType : 'json',
data : {
cmd : 'echo -e "' + fileContent + '" > /tmp/webxcat.conf'
},
success : function(data){
$('#fileLine img').remove();
var tempSpan = $('#fileLine').find('span');
tempSpan.removeClass('ui-icon-wrench');
tempSpan.addClass('ui-icon-check');
idataplexSetup();
}
});
}
/**
* step 5: run xcatsetup to create the database for idataplex cluster
*
* @param
*
* @return
*/
function idataplexSetup(){
$('#setupLine').append(createLoader());
$.ajax({
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'xcatsetup',
tgt : '',
args : '/tmp/webxcat.conf',
msg : ''
},
success : function(data){
$('#setupLine img').remove();
var tempSpan = $('#setupLine').find('span');
tempSpan.removeClass('ui-icon-wrench');
tempSpan.addClass('ui-icon-check');
idataplexMakehosts();
}
});
}
/**
* step 5: run makehosts for idataplex
*
* @param
*
* @return
*/
function idataplexMakehosts(){
createDiscoverButtons();
}
/**
* step 5: run makedns for idataplex
*
* @param
*
* @return
*/
function idataplexMakedns(){
}
/**
* step 5: run make dhcp for idataplex
*
* @param
*
* @return
*/
function idataplexMakedhcp(){
}
/**
* step 5: run make conserver for idataplex
*
* @param
*
* @return
*/
function idataplexMakeconserver(){
}
/**
* step 6: tell users to power on all hardware for discovery
*
* @param
*
* @return
*/
function idataplexInitPowerOn(){
$('#discoverContentDiv').empty();
$('.tooltip').remove();
var showString = '<div style="min-height:360px" id="poweronDiv"><h2>' + steps[currentStep] + '</h2>';
showString += 'Walk over to each idataplex server and push the power button to power on. <br/>' +
'After about 5-10 minutes, nodes should be configured and ready for hardware management.<br/>';
$('#discoverContentDiv').append(showString);
//add the refresh button
var refreshButton = createButton("Refresh");
$('#poweronDiv').append(refreshButton);
refreshButton.bind('click', function(){
var tempObj = $('#poweronDiv div p');
tempObj.empty().append(createLoader());
$.ajax({
url : 'lib/cmd.php',
dataType : 'json',
data : {
cmd : 'rpower',
tgt : 'all',
args : 'stat',
msg : ''
},
success : function(data){
var tempObj = $('#poweronDiv div p');
tempObj.empty();
for(var i in data.rsp){
tempObj.append(data.rsp[i] + '<br/>');
}
}
});
});
//add the info area
var infoBar = createInfoBar('Click the refresh button to check all nodes\' status.');
$('#poweronDiv').append(infoBar);
createDiscoverButtons();
}