#!/bin/sh # IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html #------------------------------------------------------------------------------- #=head1 syslog #=head2 syslog command that setsup the syslogd for MS, SV and nodes. # On MS, it makes sure all the xCAT messages goes to /var/log/messages file, # it enables syslogd receving logs from remote machies. # On MS, it sends all the messages to MS, # it enables syslogd receving logs from remote nodes. # On node, it sends all the messages its master. # Input: none, it takes the following environment variables: # OSVER: possible values are sles10, fedora8, redhat5, aix etc. #=cut #------------------------------------------------------------------------------- master=$MASTER conf_file="/etc/syslog.conf" sysconfig="/etc/sysconfig/syslog" init="/etc/init.d/syslog" ng=0 isSN=0 isLinux=1 isRsyslog=0 isC3=0 systemdEnabled=0 # pmatch determines if 1st argument string is matched by 2nd argument pattern pmatch () { case $1 in $2) return 0;; # zero return code means string matched by pattern esac return 1 # non-zero return code means string not matched by pattern } # is_lsb_ubuntu exit status indicates whether system appears to be Ubuntu. # Using required /etc/lsb-release file, instead of optional lsb_release command. is_lsb_ubuntu () { awk ' (match($0, "^[ \t]*DISTRIB_ID=") == 1) { # A DISTRIB_ID line id = substr($0, RLENGTH + 1) # Save its value } END { # Examine last DISTRIB_ID value to see if Ubuntu indicated if (match(id, "^(Ubuntu|\"Ubuntu\")[ \t]*$") == 1) { exit 0 # Ubuntu } exit 1 # Not Ubuntu } ' /etc/lsb-release >/dev/null 2>&1 # Routine exit status is exit status of the last command -- the awk script. # # Note: if /etc/lsb-release does not exist, the exit status indicates # failure (not Ubuntu), which is the correct outcome. } config_Rsyslog_C3() { isReceiving=0 isLocal=$1 if [ -f /etc/xCATMN ] || [ $isSN -eq 1 ] then isReceiving=1 fi if [ ! -f $2.XCATORIG ]; then cp -f $2 $2.XCATORIG else cat $2 > $2.XCATORIG fi grep "xCAT settings" $conf_file 2>&1 1> /dev/null if [ $? -eq 0 ]; then sed "/# xCAT settings/,$ d" $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 fi echo "# xCAT settings" >> $2 #enable to receive remote logging if [ $isReceiving -eq 1 ]; then sed 's/^\#\(\s\)*\$ModLoad\(\s\)*imudp/\$ModLoad imudp/' $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 sed 's/^\#\(\s\)*\$UDPServerRun/\$UDPServerRun/' $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 fi #enable to send the logging to master if [ $isLocal -eq 1 ]; then #enable the MN to log all the logs from CN and MN itself sed 's/\(^[^\#].*\/var\/log\/messages\)/\#\1/g' $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 echo "*.debug /var/log/messages" >> $2 touch /var/log/messages else sed 's/^\(\*\..*\)/\#\1/' $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 sed 's/^\(news\|local7\|mail\|authpriv\|cron\|kern\)\./\#\1\./' $2 >/tmp/sed.tmp cat /tmp/sed.tmp >$2 echo "*.* @$master" >> $2 fi } #echo "NTYPE=$NTYPE,OSVER=$OSVER,OSTYPE=$OSTYPE" if [ "$NTYPE" = service ]; then isSN=1 fi if [ -e /etc/systemd ]; then systemdEnabled=1 fi if [ "$(uname -s)" = "Linux" ]; then if ( pmatch $OSVER "fedora*" ) || ( pmatch $OSVER "rhels5*" ) || ( pmatch $OSVER "rhel6*" ) || ( pmatch $OSVER "rhels6*" ) || [ -f /etc/fedora-release ] || [ -f /etc/redhat-release ] || ( pmatch $OSVER "ubuntu*" ) || ( is_lsb_ubuntu ) || ( pmatch $OSVER "debian*" ); then if [ -e /etc/rsyslog.conf ]; then conf_file="/etc/rsyslog.conf" sysconfig="/etc/sysconfig/rsyslog" init="/etc/init.d/rsyslog" if [ $systemdEnabled -eq 1 ]; then init="rsyslog" fi isRsyslog=1 if ( pmatch $OSVER "ubuntu*" ) || ( is_lsb_ubuntu ) || ( pmatch $OSVER "debian*" ); then sysconfig="/etc/default/rsyslog" fi fi else if ( pmatch $OSVER "sles*" ) || ( pmatch $OSVER "suse*" ) || [ -f /etc/SuSE-release ]; then #find out which syslog is used for SLES, syslog or syslog-ng result=`grep "^SYSLOG_DAEMON=" $sysconfig 2>&1` if ( pmatch $result "*syslog-ng*" ); then conf_file="/etc/syslog-ng/syslog-ng.conf" ng=1 fi fi fi else sysconfig= #AIX does not have this file isLinux=0; fi #echo "isSN=$isSN, isLinux=$isLinux, ng=$ng" #echo "sysconfig=$sysconfig, confgile=$conf_file" #handle sysconfig file to make remote loggling possible if [ $isLinux -eq 1 ] && [ -e $sysconfig ]; then if [ ! -f "$sysconfig.XCATORIG" ]; then cp -f $sysconfig $sysconfig.XCATORIG fi #check if it is ryslog version 3, it has totally different settings in /etc/syslog.cong if [ $isRsyslog -eq 1 ]; then grep "SYSLOGD_OPTIONS" $sysconfig | grep -e "[\-c 3|\-c3|\-c4|\-c 4]" 2>&1 1> /dev/null if [ $? -eq 0 ]; then isC3=1 fi fi #no need to change anything for rsyslog version 3 for /etc/sysconf/rsyslog if [ $isC3 -eq 0 ]; then if [ -f /etc/xCATMN ]; then #on MN: make the syslogd be able to receive remote logs awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) { if ($0 !~ /-r/) {sub(/-/, "-r -", $0)} if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)} print $0} else { print $0}}' $sysconfig > $sysconfig.tmp else if [ $isSN -eq 1 ]; then #on SN: make the syslog be able to receive and forward remote logs awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) { if ($0 !~ /-r/) {sub(/-/, "-r -", $0)} if ($0 !~ /-h/) {sub(/-/, "-h -", $0)} if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)} print $0} else { print $0}}' $sysconfig > $sysconfig.tmp else ##turn off the time marker on all awk '{if($0 ~ /^SYSLOGD_OPTIONS=|^SYSLOGD_PARAMS=/) { if (($0 !~ /-m0/) && ($0 !~/-m 0/)) { sub(/-/, "-m 0 -", $0)} print $0} else {print $0}}' $sysconfig > $sysconfig.tmp fi fi mv -f $sysconfig.tmp $sysconfig fi fi #syslog-ng has different way of enabling log forwarding if [ $ng -eq 1 ]; then if [ $isSN -eq 1 -o -f /etc/xCATMN ]; then if [ ! -f $conf_file.XCATORIG ]; then cp -f $conf_file $conf_file.XCATORIG fi sed 's/#udp(ip("0.0.0.0/udp(ip("0.0.0.0/' $conf_file >/tmp/sed.tmp cat /tmp/sed.tmp >$conf_file fi fi #now handling where the logs go goLocal=0; if [ -f /etc/xCATMN ]; then goLocal=1 else if [ $isSN -eq 1 ]; then if [ -n "$SVLOGLOCAL" ] && [ $SVLOGLOCAL -eq 1 ]; then goLocal=1 fi fi fi if [ $isC3 -eq 1 ]; then config_Rsyslog_C3 $goLocal $conf_file else if [ $goLocal -eq 1 ]; then #making sure all the messages goes to /var/log/messages touch /var/log/messages if [ $ng -eq 0 ]; then if [ ! -f $conf_file.XCATORIG ]; then cp -f $conf_file $conf_file.XCATORIG fi grep "xCAT settings" $conf_file 2>&1 1> /dev/null if [ $? -eq 0 ]; then sed "/# xCAT settings/,$ d" $conf_file >/tmp/sed.tmp cat /tmp/sed.tmp >$conf_file fi if [ $isLinux -eq 0 ]; then # aix echo "# xCAT settings" >> $conf_file echo "*.debug /var/log/messages rotate 1024K files 5" >> $conf_file fi else # enable the settings that will log to local files in syslog-ng sed -i '/destination messages/s/^#*//' $conf_file sed -i '/destination(messages)/s/^#*//' $conf_file sed -i '/destination warn/s/^#*//' $conf_file sed -i '/destination(warn)/s/^#*//' $conf_file fi #Ubuntu doesn't have sysconfig # so configuring the MN to receive UDP connections here. if ( pmatch $OSVER "ubuntu*" ) || ( is_lsb_ubuntu ) || ( pmatch $OSVER "debian*" ); then egrep \('^\$UDPServerRun 514'\|'^\$ModLoad imudp'\) $conf_file > /dev/null 2>&1; if [ $? -eq 1 ]; then echo "\$ModLoad imudp" >> $conf_file; echo "\$UDPServerRun 514" >> $conf_file; fi fi else #now make the syslogd fowarding the messages to the the master if [ $ng -eq 1 ]; then if [ ! -f $conf_file.XCATORIG ]; then cp -f $conf_file $conf_file.XCATORIG fi grep "xCAT settings" $conf_file 2>&1 1> /dev/null if [ $? -eq 0 ]; then sed "/# xCAT settings/,$ d" $conf_file >/tmp/sed.tmp cat /tmp/sed.tmp >$conf_file fi echo "# xCAT settings" >> $conf_file echo "destination loghost { udp(\"$master\"); };" >> $conf_file echo 'log { source(src); destination(loghost); };' >> $conf_file # remove the settings that will log to local files sed -i '/destination messages/s/^/#/' $conf_file sed -i '/destination(messages)/s/^/#/' $conf_file sed -i '/destination warn/s/^/#/' $conf_file sed -i '/destination(warn)/s/^/#/' $conf_file else if [ -f $conf_file.XCATORIG ]; then rm -f $conf_file else mv -f $conf_file $conf_file.XCATORIG fi echo "# xCAT settings" > $conf_file if [ $isLinux -eq 0 ]; then echo "*.debug @$master" >> $conf_file else if ( pmatch $OSVER "ubuntu*" ) || ( is_lsb_ubuntu ) || ( pmatch $OSVER "debian*" ); then echo "\$ModLoad imuxsock" >> $conf_file echo "*.* @$master" >> $conf_file else echo "*.* @$master" >> $conf_file fi fi fi fi fi #restart the syslog daemon to take the new conf file settings if [ $isLinux -eq 0 ]; then PARSE_SRC_STATE="-e1d;s/.* \([a-zA-Z0-9]*\)$/\1/" state=$(LC_ALL=C lssrc -s syslogd | LC_ALL=C sed "$PARSE_SRC_STATE") if [ -n "$state" ] && [ "$state" = "active" ]; then stopsrc -s syslogd fi #wait for syslogd to fully started RETRY_LIMIT=30 # number of 2 second retry intervals (60 second total) i=$RETRY_LIMIT while : do ret=`LC_ALL=C startsrc -s syslogd 2>&1` if ( pmatch $ret "*PID*" ); then break fi i=$((i - 1)) if [ $i -gt 0 ]; then sleep 2 else break fi done else if [ $systemdEnabled -eq 1 ]; then systemctl restart $init.service else $init restart fi fi #keep a record logger -t xCAT -p local4.info "Install: syslog setup" exit 0