=head1 NAME B - Discovers selected networked services information within the same subnet. =head1 SYNOPSIS I I I] [-V| --verbose] [-i ip[,ip..]][-w][-r|-x|-z][-n][-s BPA|MM|IVM|RSA|FSP|HMC][-t tries][-m][-I][-e command][-c [timeinterval[timeinterval,..]]][-C counts][-T timeout][--vpdtable][-M vpd|switchport][--updatehosts][-makedhcp][--resetnet]> =head1 DESCRIPTION The lsslp command discovers selected service types using the -s flag. All service types are returned if the -s flag is not specified. If a specific IP address is not specified using the -i flag, the request is sent out all available network adapters. The optional -r, -x, -z and --vpdtable flags format the output. NOTE: SLP broadcast requests will propagate only within the subnet of the network adapter broadcast IPs specified by the -i flag. =head1 OPTIONS B The nodes which the user want to discover. If the user specify the noderange, lsslp will just return the nodes in the node range. Which means it will help to add the new nodes to the xCAT database without modifying the existed definitions. But the nodes' name specified in noderange should be defined in database in advance. And please do not use noderange with the flag -s. B<-c> Convergence timeout. A value-list of 32 bit integers used as timeouts, in milliseconds, to implement the convergence algorithm. Each value specifies the time to wait before sending the next request, or until nothing new has been learned from two successive requests. A maximum of 5 comma- seperated values are allowed. Note that specifying -c with no arguments will use the timeout values last specified. Not including -c will use the hardcoded defaults of 500,750,1000,1500,2000 milliseconds. B<-i> IP(s) the command will send out (defaults to all available adapters). B<-e> Path and command name of IBM SLP slp_query (defaults to OpenSLP - slptool). An IBM proprietary implementation of SLP can be also be used. Contact IBM for details. B<-h> Display usage message. B<-m> Multicast mode (defaults to broadcast). B<--makedhcp> Issue xCAT command makedhcp internally. B<-M> Matching mode, match the pre-defined node names from vpd table or switch table. Default is using factory name if no -M specified. B<-n> Only display and write the newly discovered hardwares. B<-r> Display Raw SLP response. B<-C> The number of the nodes expected to find, specified by the user. When using this flag, lsslp will not return until the it has found all the nodes or time out. The default max time is 5 minutes. The user can use -T flag the specify the time they want to use. A short time will limite the time costing, while a long time will help to find all the nodes. B<-T> The number in seconds to limite the time costing of lsslp. Must be used with the flag -C. See the help of flag -C for more details. B<--resetnet> Login to hardwares and reset the network interfaces. This option is only valid for the nodes with different attributes: ip and otherinterfaces in hosts table. B<-s> Service type interested in discovering. B<-t> Number or service-request attempts. B<--updatehosts> Display current IP address or write the ip address into xCAT DB. Please be aware that otherinterfaces column in hosts table saved the current ip address, ip column stores the new ip address that user defined. With this option, lsslp will write the current ip to ip column also, which means the ip user wants is the same as current ip address running on hardwares. This is to avoid useless network resetting that if ip and otherinterfaces are the same, lsslp will skip the network resetting for that node. B<--vpdtable> Output the SLP response in vpdtable formatting. Easy for writting data to vpd table. B<-v> Command Version. B<-V> Verbose output. B<-w> Writes output to xCAT database. B<-x> XML format. B<-z> Stanza formated output. B<-I> Give the warning message for the nodes in database which have no SLP responses. Please note that this flag noly can be used after the database migration finished successfully. =head1 RETURN VALUE 0 The command completed successfully. 1 An error has occurred. =head1 EXAMPLES 1. To list all discovered HMC service types in tabular format with convergence timeouts of 5000,5000,2000,1000,1000 milliseconds, enter: lsslp -s HMC -c 5000,5000,2000,1000,1000 Output is similar to: device type-model serial-number ip-addresses hostname HMC 7310CR2 103F55A 1.1.1.115 2.2.2.164 3.3.3.102 hmc01 HMC 7310CR2 105369A 3.3.3.103 2.2.2.103 1.1.1.163 hmc02 HMC 7310CR3 KPHHK24 3.3.3.154 2.2.2.110 1.1.1.154 hmc03 2. list all discovered FSP service types in raw response format on subnet 30.0.0.255, enter: lsslp -i 3.0.0.255 -s FSP -r Output is similar to: (type=cec-service-processor),(serial-number=10A3AEB),(machinetype-model=9117-570),(fru-serial-number=YL11C5338102),(hostname=),(frame-number=0),(cage-number=0),(ip-address=3.0.0.94,1.1.1.147),(web-url=https://3.0.0.94:473 ), (slot=1),(bpc-machinetype-model=0),(bpc-serial-number=0),(Image=fips240/b0630a_0623.240) (type=cec-service-processor),(serial-number=10A3E2B),(machinetype-model=9117-570),(fru-serial- number=YL11C5338250),(hostname=),(frame-number=0),(cage-number=0),(ip-address=3.0.0.95,1.1.1.147), (web-url=https://3.0.0.95:473 ),(slot=1),(bpc-machinetype-model=0),(bpc-serial-number=0),(Image=fips240/b0630a_0623.240) 3. To list all discovered MM service types in XML format and write the output to the xCAT database, enter: lsslp -s MM -x -w Output is similar to: mm,all 00:14:5E:E0:CB:1E blade 029310C Server-029310C-SN100485A-A mm 9.114.47.229 100485A 4. To list all discovered service types in stanza format and write the output to the xCAT database, enter: lsslp -z -w Output is similar to: mm01: objtype=node nodetype=fsp mtm=8233-E8B serial=1000ECP side=A otherinterfaces=50.0.0.5 groups=fsp,all mgt=fsp id=0 mac=00:14:5E:F0:5C:FD ip=50.0.0.5 bpa01: objtype=node nodetype=bpa mtm=9A01-100 serial=0P1N746 side=A otherinterfaces=50.0.0.1 groups=bpa,all mgt=bpa id=0 mac=00:1A:64:54:8C:A5 ip=50.0.0.1 5. To list all discovered service types in stanza format and display the IP address, enter: lsslp -w --updatehosts Output is similar to: mm01: objtype=node nodetype=fsp mtm=8233-E8B serial=1000ECP side=A otherinterfaces=50.0.0.5 groups=fsp,all mgt=fsp id=0 mac=00:14:5E:F0:5C:FD ip=50.0.0.5 bpa01: objtype=node nodetype=bpa mtm=9A01-100 serial=0P1N746 side=A otherinterfaces=50.0.0.1 groups=bpa,all mgt=bpa id=0 mac=00:1A:64:54:8C:A5 ip=50.0.0.1 6. To list all the FSPs and reset their network interfaces to get new IP from dhcp server, enter: lsslp -s FSP --resetnet Output is similar to: Start to reset network.. Reset network failed nodes: Reset network succeed nodes: Server-8233-E8B-SN1000ECP-A,Server-9119-FHA-SN0275995-B,Server-9119-FHA-SN0275995-A, Reset network finished. device type-model serial-number side ip-addresses hostname FSP 9117-MMB 105EBEP A-1 20.0.0.138 20.0.0.138 FSP 9117-MMB 105EBEP B-1 20.0.0.139 20.0.0.139 FSP 8205-E6B 1040C7P A-1 20.0.0.141 20.0.0.141 FSP 8233-E8B 100538P A-0 20.0.0.146 20.0.0.146 FSP 9125-F2A 0262652 A-1 20.0.0.166 20.0.0.166 FSP 9125-F2A 027ACA4 A-1 20.0.0.169 20.0.0.169 7. To list all the nodes defined in database which have no SLP response. lsslp -I Output is similar to: Warning: The node Server-8204-E8 has no response. Warning: The node Server-8203-E4 has no response. device type-model serial-number side ip-addresses hostname BPA 9458-100 99201WM B-1 10.1.255.250 10.1.255.250 FSP 9125-F2A 0262652 A-0 192.168.200.16 192.168.200.16 FSP 8233-E8B 1000ECP A-0 192.168.200.19 192.168.200.19 CEC 8205-E6B 1040C7P Server-8205-E6B-SN1040C7P 8. To find the nodes within the user specified. Please make sure the noderange input have been defined in xCAT database. lsslp cec1-cec3 device type-model serial-number side ip-addresses hostname CEC 9125-F2A 0262652 A-0 192.168.200.16 cec1 CEC 8233-E8B 1000ECP A-0 192.168.200.19 cec2 CEC 8205-E6B 1040C7P A-0 192.168.200.1 cec3 =head1 FILES /opt/xcat/bin/lsslp =head1 SEE ALSO L