diff --git a/builddep.sh b/builddep.sh index 90886b986..d67b4bd74 100755 --- a/builddep.sh +++ b/builddep.sh @@ -164,6 +164,7 @@ for i in `ls *.rpm|grep -v -E '^tcl-|^tk-|^expect-|^unixODBC-|^xCAT-UI-deps|^per rpm -Uvh $opts $i done # don't try to install tcl, tk, or expect if they are already installed! +# this section about expect/tcl/tk can be removed once 2.8 releases, because 2.8 no longer requires expect lslpp -l | grep expect.base > /dev/null 2>&1 if [ $? -gt 0 ]; then if [ "$OSVER" == "5.3" ]; then diff --git a/xCAT-server/sbin/lpar_netboot.expect b/xCAT-server/sbin/lpar_netboot.expect deleted file mode 100644 index c7a0723bd..000000000 --- a/xCAT-server/sbin/lpar_netboot.expect +++ /dev/null @@ -1,2771 +0,0 @@ -#!/usr/bin/expect -- -# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html - -log_user 0 -set stm 1 - -# -# PROCEDURE -# -# Declare procedure to write status/error messages -# We do it this way so that if /var is full (or some other error occurs) -# we can trap it in a common section of code. -# -proc nc_msg { msg } { - global verbose - - if { $verbose == 1 } { - send_user $msg - } -} - -# -# PROCEDURE -# -# Define the procedure to connect to the IVM -# -proc connect {} { - - global hcp - global ssh_spawn_id - global prompt - global userid - global passwd - global PROGRAM - - if [ catch { spawn ssh $userid@$hcp} ssh_pid ] { - send_user "$PROGRAM: Unable to spawn ssh connection to $hcp\n" - exit 1 - } - set ssh_spawn_id $spawn_id - set timeout 10 - set pwd_sent 0 - # - # Look for password prompt, and reply - # - expect { - -i $ssh_spawn_id \ - -re $prompt { - - } - -re "ast login.*" { - return - } - -re "assword: $" { - if { $pwd_sent != 1 } { - set pwd_sent 1 - send -i $ssh_spawn_id "$passwd\r" - exp_continue - } - send_user "$PROGRAM: Incorrect login\n" - exit 1 - } - timeout { - send_user "$PROGRAM: Timeout waiting for password prompt\n" - exit 1 - } - eof { - send_user "$PROGRAM: ssh connection terminated unexpectedly\n" - exit 1 - } - } -} - - -# -# PROCEDURE -# -# Procedure to run the rpower command -# test its return code and capture its output -# -proc run_lssyscfg {} { - global DSPMSG - global PROGRAM - global ssh_spawn_id - global env - global manage - global msg - global node - global profile - global rc - global prompt - global tmp - global BINPATH - - set timeout 20 - - set runcmd [list exec $BINPATH/rpower $node state] - set rc [catch $runcmd msg] - nc_msg "$PROGRAM Status: run_lssyscg : partition status : $msg\n" - regexp "$node:\[ ]*(.*)" $msg tmp1 tmp - if { $tmp != "" } { - set msg $tmp - } - nc_msg "####msg:$msg#########\n" - - - # Slow down the requests speed to hcp, so that hcp will not busy on - # query. Instead, hcp should put more time on other activities. - # Another reason to set this sleep is giving some time to the lpars - # to be more stable. - sleep 4 - - if { $rc } { - send_user "$PROGRAM: Unable to determine machine state\n" - nc_msg "$PROGRAM Status: error from rpower command\n" - - - send_user "Error : $msg\n" - exit 1 - } -} - -# -# PROCEDURE -# -# Declare procedure to write usage message and exit -# -proc usage {} { - global PROGRAM - - send_user "Usage: Install partition \ - \n\t$PROGRAM \[-v\] \[-x\] \[-f\] \[-w set_boot_order\] \[-A -D | \[-D\] | \[-D\] -m macaddress\] -t ent -s speed -d duplex \ - \n\t\t-S server -G gateway -C client hostname profile managed_system lparid remote_host\ - \n \ - \nUsage: Return macaddress \ - \n\t$PROGRAM -M -n \[-v\] -t ent \[-f] \[-x] \[-D -s speed -d duplex -S server -G gateway -C client\] hostname profile managed_system lparid remote_host\ - \n \ - \n\t-n\tDo not boot partition \ - \n\t-t\tSpecifies network type ent \ - \n\t-D\tPerform ping test, use adapter that successfully ping the server \ - \n\t-s\tNetwork adapter speed \ - \n\t-d\tNetwork adapter duplex \ - \n\t-S\tServer IP address \ - \n\t-G\tGateway IP address \ - \n\t-C\tClient IP address \ - \n\t-m\tMAC Address \ - \n\t-v\tVerbose output \ - \n\t-x\tDebug output \ - \n\t-f\tForce close virtual terminal session \ - \n\t-w\tSet boot device order \ - \n\t\t\t0: Don't set boot device order \ - \n\t\t\t1: Set network as boot device \ - \n\t\t\t2: Set network as 1st boot device, disk as 2nd boot device \ - \n\t\t\t3: Set disk as 1st boot device, network as 2nd boot device \ - \n\t\t\t4: set disk as boot device \ - \n\t-M\tDiscovery ethernet adapter mac address and location code \ - \n\t--help\tPrints this help\n" - exit 1 -} - -# -# PROCEDURE -# -# Check command line arguments -# -proc ck_args {} { - global adap_speed - global adap_duplex - global client_ip - global server_ip - global gateway_ip - global node - global manage - global profile - global hcp - global lparid - global PROGRAM - global discover_macaddr - global extra_args - global macaddress - global phys_loc - global discover_all - global discovery - global noboot - global filename - - if { $discovery && ( $adap_speed == "" || $adap_duplex == "" ) } { - send_user "$PROGRAM: Speed and duplex required\n" - usage - } - - if { $discovery && $client_ip == "" } { - send_user "$PROGRAM: Client IP is required\n" - usage - } - - if { $discovery && $server_ip == "" } { - send_user "$PROGRAM: Server IP is required\n" - usage - } - - if { $discovery && $gateway_ip == "" } { - send_user "$PROGRAM: Gateway IP is required\n" - usage - } - - if { $node == "" } { - send_user "$PROGRAM: Node is required\n" - usage - } else { - nc_msg "$PROGRAM Status: node $node\n" - } - - if { $manage == "" } { - send_user "$PROGRAM: Managed system is required\n" - usage - } else { - nc_msg "$PROGRAM Status: managed system $manage\n" - } - - if { $hcp == "" } { - send_user "$PROGRAM: Hardware control point address is required\n" - usage - } else { - nc_msg "$PROGRAM Status: Hardware control point $hcp\n" - } - if { $lparid == "" } { - send_user "$PROGRAM: LPAR Id is required\n" - usage - } else { - nc_msg "$PROGRAM Status: LPAR Id is $lparid\n" - } - if { $profile == "" } { - send_user "$PROGRAM: Profile is required\n" - usage - } else { - nc_msg "$PROGRAM Status: profile $profile\n" - } - - if { $discover_macaddr && $extra_args != "" } { - send_user "$PROGRAM: Can not specify -M and -g flags together.\n" - usage - } - - if { $discover_macaddr && ( $macaddress != "" || $phys_loc != "" ) } { - send_user "$PROGRAM: Can not specify -M and -l or -m flags together.\n" - usage - } - - if { $macaddress != "" && $phys_loc != "" } { - send_user "$PROGRAM: Can not specify -l and -m flags together.\n" - usage - } - - if { $discover_all && ( $macaddress != "" || $phys_loc != "" ) } { - send_user "$PROGRAM: Can not specify -A and -m or -l flags together.\n" - usage - } - - if { $discover_all && !$discovery && !$noboot } { - send_user "$PROGRAM: Flag -A must be specify with flag -D for booting.\n" - usage - } - - if { $discover_macaddr && $discovery && - ( $server_ip == "" || $gateway_ip == "" || $client_ip == "" || $adap_speed == "" || $adap_duplex == "" ) } { - send_user "$PROGRAM: Flag -M with -D require arguments for -C, -S, -G, -s and -d.\n" - usage - } - - if { $discover_macaddr && !$discovery && - ( $server_ip != "" || $gateway_ip != "" || $client_ip != "" || $adap_speed != "" || $adap_duplex != "" ) } { - send_user "$PROGRAM: Flag -M with arguments for -C, -S, -G, -s and -d require -D flag.\n" - usage - } - - if { $discover_macaddr && !$noboot } { - send_user "$PROGRAM: -M flag requires -n.\n" - usage - } - - if { [regexp "(\[ ]+)-" $node ] } { - send_user "$PROGRAM: Error : $node\n" - send_user "$PROGRAM: Node is required\n" - exit 1 - } - - if { [regexp "(\[ ]+)-" $manage ] } { - send_user "$PROGRAM: Error : $managed\n" - send_user "$PROGRAM: Managed system is required\n" - exit 1 - } - - if { [regexp "(\[ ]+)-" $profile ] } { - send_user "$PROGRAM: Error : $profile\n" - send_user "$PROGRAM: Profile is required\n" - exit 1 - } -} - -# -# PROCEDURE -# -# Declare procedure to send commands slowly. This is needed because -# some bytes are missed by the service processor when sent at top speed. -# The sleep was needed because a command was sent sometimes before the -# results of the previous command had been received. -# -# The Open Firmware is constrained on how quickly it can process input streams. -# The following code causes expect to send 10 characters and then wait 1 second -# before sending another 10 bytes. -# -proc send_command {} { - - global command - global spawn_id_rconsole - - # sleep so that any error messages from previous command are cleared up - exec sleep 1 - send -i $spawn_id_rconsole -- $command -} - -# -# PROCEDURE -# -# Declare procedure to parse the full device tree that is displayed as a result -# of an ls command. The information needed is the phandle and full device name -# of a supported network card found in the device tree. The phandle is used in -# other procedures to get and change properties of the network card. The full -# device name is used to network boot from the network adapter. -# -proc get_phandle {} { - - global spawn_id_rconsole - global expect_out - global phandle_array - global full_path_name_array - global rc - global command - global adapter_found - global adap_type - global dev_count - global dev_pat - global dev_type - global DSPMSG - global PROGRAM - global NODENAME - - nc_msg "$PROGRAM Status: Starting to get full device name and phandle\n" - - # This is the first procedure entered after getting to the ok prompt. On entry - # the current device is not root. The command 'dev /' is sent to get to the - # root of the device tree. There is no output from the dev command. The expected - # output is the ok prompt ('>'). - # - # The pwd command can be used to determine what the current device is. - # - set timeout 30 ;# shouldn't take long - - nc_msg "$PROGRAM Status: sending dev / command\n" - set command "dev /\r" - send_command - expect { - -i $spawn_id_rconsole - -re "dev(.*)ok(.*)0 >" { - nc_msg "$PROGRAM Status: at root\n" - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - - # Next, the 'ls' command is sent. The result is a display of the entire - # device tree. The code then looks at the - # output from the ls command one line at a time, trying to match it with the - # regexp pattern in dev_pat, an array that contains all the supported network - # adapters. When found, the adapter type, the phandle and path name are saved - # in array variables. - # - # The complicated part is that the full path name may be spread over more than - # one line. Each line contains information about a node. If the supported - # network adapter is found on an nth level node, the full path name is the - # concatenation of the node information from the 0th level to the nth level. - # Hence, the path name from each level of the device tree needs to be saved. - # - # The pattern "\n(\[^\r]*)\r" is worth a second look. It took - # many hours of debug and reading the expect book to get it right. When more - # than one line of data is returned to expect at once, it is tricky getting - # exactly one line of data to look at. This pattern works because it looks - # for a newline(\n), any character other than a carriage return(\[^\r]*), and - # then for a carriage return. This causes expect to match a single line. - # If (.*) is used instead of (\[^\r]*), multiple lines are matched. (that was - # attempt number 1) - # - # Once a single line is found, it tries to determine what level in the device - # tree this line is. - # searching through subsequent lines and subsequent levels until an - # adapter is found. - # The level of the current line, which - # is calculated based on the assumption of "Level = (Leading Spaces - 1)/2". - # Leading Spaces is the number of spaces between the first colon ':' and the - # first non-space character of each line. - # - # Using the -d flag helped a lot in finding the correct pattern. - # - nc_msg "$PROGRAM Status: sending ls command\n" - set command "ls \r" - send_command - - set adapter_found 0 - set done 0 - - set timeout 60 ;# shouldn't take more than a few minutes - while { ! $done } { - # this expect call isolates single lines - # This code uses the tcl regexp to parse the single line - # isolated by expect. - # - # When the ok prompt ('>') is matched, this indicates the end of - # the ls output, at which point the done variable is set, to break - # out of the loop. - # - # All other lines are ignored. - # - expect { - -re "(\n)(\[^\r]*)(\r)" { - if { [regexp "\n(\[^\r]*):(\[ ]+)/(\[^\r]*)\r" $expect_out(0,string) x1 x2 x3 x4] } { - - # Each level is inspected for a match - set level [expr ([string length $x3]-1)/2] - set path($level) $x4 - for {set j 0} {$j < $dev_count} {incr j 1} { - if {[regexp $dev_pat($j) $x4]} { - if {[regexp "hfi-ethernet" $x4] && $dev_pat($j) == "ethernet"} { - continue - } - incr adapter_found 1 - for {set i 0} {$i <= $level} {incr i 1} { - append full_path_name_array($adapter_found) "/$path($i)" - } - set phandle_array($adapter_found) $x2 - set adap_type($adapter_found) $dev_type($j) - break - } - } - } - } - -re ">" { - set done 1 - } - timeout { - send_user "$PROGRAM: Timeout isolating single line of ls output\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - # Did we find one or more adapters? - if { $adapter_found > 0 } { - set rc 0 - } else { - send_user "$PROGRAM: No network adapters found\n" - set rc -1 - } -} - - -# -# PROCEDURE -# -# Declare procedure to obtain the list of valid adapter connector properties -# from the adapter card. Connector types can be rj45, sc, 9pin, aui, -# bnc, or mic. Speeds can be 10, 100, or 1000. Duplex can be half or -# full. This procedure will use the "supported-network-types" -# argument to the get-package-property command to get the list of -# properties for the given adapter. -# - -proc get_adap_prop { phandle } { - - global rc - global spawn_id_rconsole - global expect_out - global command - global adap_prop_list - global PROGRAM - global NODENAME - - set adap_prop_list {} - set rc 0 - set timeout 120 - set state 0 - nc_msg "$PROGRAM Status: get_adap_prop start\n" - - # state 0, stack count 0 - set done(0) 0 - set cmd(0) "\" supported-network-types\" $phandle get-package-property\r" - set msg(0) "$PROGRAM Status: rc and all supported network types now on stack\n" - set pattern(0) "(.*)3 >(.*)" - set newstate(0) 1 - - # state 1, return code and string on stack - set done(1) 0 - set cmd(1) ".\r" - set msg(1) "$PROGRAM Status: All supported network types now on stack\n" - set pattern(1) "(.*)2 >(.*)" - set newstate(1) 2 - - # state 2, data ready to decode - set done(2) 0 - set cmd(2) "decode-string\r" - set msg(2) "$PROGRAM Status: supported network type isolated on stack\n" - set pattern(2) "(.*)ok(.*)4 >(.*)" - set newstate(2) 3 - - # state 3, decoded string on stack - set done(3) 0 - set cmd(3) "dump\r" - set msg(3) "$PROGRAM Status: supported network type off stack\n" - set pattern(3) ".*:.*:(.*):.*:.*:(.*):.*(2 >)(.*)" - set newstate(3) 4 - - # state 4, need to check for more data to decode - set done(4) 0 - set cmd(4) ".s\r" - set msg(4) "$PROGRAM Status: checking for more supported network types\n" - set pattern(4) ".s (\[0-9a-f]* )(.*)>" - set newstate(4) 5 - - # state 5, done decoding string, clear stack - set done(5) 0 - set cmd(5) ".\r" - set msg(5) "$PROGRAM Status: one entry on stack cleared\n" - set pattern(5) "(.*)ok(.*)1 >(.*)" - set newstate(5) 6 - - # state 6, finish clearing stack, choose correct adapter type - set done(6) 0 - set cmd(6) ".\r" - set msg(6) "$PROGRAM Status: finished clearing stack\n" - set pattern(6) "(.*)ok(.*)0 >(.*)" - set newstate(6) 7 - - # state 7, done - set done(7) 1 - - while { $done($state) == 0 } { - nc_msg "$PROGRAM Status: command is $cmd($state)\n" - set command $cmd($state) - send_command - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - nc_msg $msg($state) - set state $newstate($state) - - # After state 3, the network type is parsed and the connector - # type extracted. If the type hasn't been found, add it to - # the list of supported connector types. - if { $state == 4 } { - set nw_type $expect_out(1,string)$expect_out(2,string) - - # Build the adapter properties from the string - regexp .*,(.*),(.*),(.*) $nw_type dummy nw_speed nw_conn nw_duplex - set adap_prop "$nw_speed,$nw_conn,$nw_duplex" - nc_msg "$PROGRAM Status: Adapter properties are $adap_prop\n" - - # if it's not in the list, add it, otherwise continue - if { [ lsearch adap_prop_list $adap_prop ] == -1 } { - lappend adap_prop_list $adap_prop - nc_msg "$PROGRAM Status: Adding adapter properties to list\n" - } - } - - # After state 4, a test is done to see if all of the supported - # network types have been decoded. If they have been, the - # state variable is left alone. if not, the state variable is - # set to 2, causing a loop back to the step where the - # decode-string command is sent. - if { $state == 5 } { - if { [ string index $expect_out(2,string) 0] != 0 } { - set state 2 - } - } - - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout in getting adapter properpties\n" - nc_msg "timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - set rc 0 - return -} - -# -# PROCEDURE -# -# Declare procedure to obtain the ethernet or mac address property from the -# ethernet card. -# -# 3 commands lines containing a total of 6 commands are used. -# -# The get-package-property command is an example of a command -# that takes it's arguments off the stack and puts the results back onto the -# stack. Because of this, the arguments for the get-package-property command -# are in front of the command verb. -# -# -# The only reason this procedure is implemented in a loop is to avoid coding -# 3 expect commands. - -proc get_mac_addr { phandle } { - - global rc - global spawn_id_rconsole - global expect_out - global command - global PROGRAM - global NODENAME - - set rc 0 - nc_msg "$PROGRAM Status: get_mac_addr start\n" - - # cmd(0) could have been sent as 3 commands. " mac-address" (tcl forces - # the use of \") is the first command on this line. The result of entering - # " mac-address" is that 2 stack entries are created, and address and a length. - # - # The next command in cmd(0) is the phandle with no quotes. This results in - # one stack entry because the phandle is an address. - # - # the third command in cmd(0) is get-package-property. After this command, there - # are 3 stack entries (return code, address and length of mac-address). - # state 0, stack count 0, send command - set done(0) 0 - set cmd(0) "\" local-mac-address\" $phandle get-package-property\r" - set msg(0) "$PROGRAM Status: return code and mac-address now on stack\n" - set pattern(0) "(.*)3 >(.*)" - set newstate(0) 1 - - # cmd(1) is a dot (.). This is a stack manipulation command that removes one - # thing from the stack. pattern(1) is looking for a prompt with the 2 indicating - # that there are 2 things left on the stack. - # state 1, return code and mac-address on stack - set done(1) 0 - set cmd(1) ".\r" - set msg(1) "$PROGRAM Status: mac-address now on stack\n" - set pattern(1) "(.*)2 >(.*)" - set newstate(1) 2 - - # cmd(2) is the dump command. This takes an address and a length off the stack - # and displays the contents of that storage in ascii and hex. The long pattern - # puts the hex into the variable expect_out(3,string). The tcl verb 'join' is - # used to eliminate the spaces put in by the dump command. - # state 2, mac-address on stack - set done(2) 0 - set cmd(2) ": dump-mac ( prop-addr prop-len -- ) \ - cr \ - dup decode-bytes 2swap 2drop ( data-addr data-len ) \ - ( data-len ) 0 ?do \ - dup c@ 2 u.r ( data-addr ) \ - char+ ( data-addr' ) \ - loop \ - drop \ - cr \ - ; \r" - set msg(2) "$PROGRAM Status: set command\n" - set pattern(2) "(.*)ok" - set newstate(2) 3 - - set done(3) 0 - set cmd(3) "dump-mac\r" - set msg(3) "$PROGRAM Status: mac-address displayed, stack empty\n" - set pattern(3) "dump-mac(.*)ok" - set newstate(3) 4 - - - # state 4, all done - set done(4) 1 - - set state 0 - set timeout 60 ;# shouldn't take long - while { $done($state) == 0 } { - nc_msg "$PROGRAM Status: command is $cmd($state)\n" - set command $cmd($state) - send_command - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - nc_msg $msg($state) - set state $newstate($state) - } - "1 > " { - if { $state == 0 } { - # An error occurred while obtaining the mac address. Log the error, - # but don't quit nodecond. instead, return NA for the address - # - set command ".\r" - send_command - expect { - -i $spawn_id_rconsole - -re "(-*\[0-9\]*) ok(.*)0 >(.*)" { - set mac_rc $expect_out(1,string) - nc_msg "$PROGRAM Status: Error getting MAC address for phandle=$phandle. RC=$mac_rc.\n" - send_user "# Could not obtain MAC address; setting MAX to NA\n" - set rc 0 - set mac_address "NA" - return $mac_address - } - timeout { - send_user "$PROGRAM: Timeout when getting mac address\n" - nc_msg "timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout in getting mac address\n" - nc_msg "timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - # if the state is 0, 1, or 2, an error occurred and the join will fail - if { $state == 4 } { - set mac_address [ join $expect_out(1,string) "" ] - set rc 0 - return $mac_address - } else { - set rc -1 - } -} - -# -# PROCEDURE -# -# Declare procedure to obtain the list of ethernet adapters, their physical -# location codes and MAC addresses. -# -# The get-package-property command is an example of a command -# that takes it's arguments off the stack and puts the results back onto the -# stack. Because of this, the arguments for the get-package-property command -# are in front of the command verb. -# -# The only reason this procedure is implemented in a loop is to avoid coding -# 3 expect commands. - -proc get_adaptr_loc { phandle } { - - global rc - global spawn_id_rconsole - global expect_out - global command - global PROGRAM - global NODENAME - - set rc 0 - nc_msg "$PROGRAM Status: get_adaptr_loc start\n" - - # cmd(0) could have been sent as 3 commands. " ibm,loc-code" (tcl forces - # the use of \") is the first command on this line. The result of entering - # " ibm,loc-code" is that 2 stack entries are created, and address and a length. - # - # The next command in cmd(0) is the phandle with no quotes. This results in - # one stack entry because the phandle is an address. - # - # the third command in cmd(0) is get-package-property. After this command, there - # are 3 stack entries (return code, address and length of mac-address). - # state 0, stack count 0, send command - set done(0) 0 - set cmd(0) "\" ibm,loc-code\" $phandle get-package-property\r" - set msg(0) "$PROGRAM Status: return code and loc-code now on stack\n" - set pattern(0) "(.*)3 >(.*)" - set newstate(0) 1 - - # cmd(1) is a dot (.). This is a stack manipulation command that removes one - # thing from the stack. pattern(1) is looking for a prompt with the 2 indicating - # that there are 2 things left on the stack. - # state 1, return code and loc-code on stack - set done(1) 0 - set cmd(1) ".\r" - set msg(1) "$PROGRAM Status: loc-code now on stack\n" - set pattern(1) "(.*)2 >(.*)" - set newstate(1) 2 - - # state 2, loc-code on stack - set done(2) 0 - set cmd(2) "dump\r" - set msg(2) "$PROGRAM Status: loc-code displayed, stack empty\n" - set pattern(2) "(.*)(: )(.*)( :)(.*)(\.: ok)" - set newstate(2) 3 - - # state 3, all done - set done(3) 1 - - set state 0 - set timeout 60 ;# shouldn't take long - while { $done($state) == 0 } { - nc_msg "$PROGRAM Status: command is $cmd($state)\n" - set command $cmd($state) - send_command - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - nc_msg $msg($state) - set state $newstate($state) - } - "1 > " { - if { $state == 0 } { - set command ".\r" - send_command - expect { - -i $spawn_id_rconsole - -re "(-*\[0-9\]*) ok(.*)0 >(.*)" { - set loc_rc $expect_out(1,string) - send_user "$PROGRAM: Error getting adapter physical location.\n" - nc_msg "$PROGRAM Status: Error getting physical location for phandle=$phandle. RC=$loc_rc.\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout when openning console\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout in openning console\n" - nc_msg "$PROGRAM Status: timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - if { $state == 3 } { - set rc 0 - if { [regexp "(.*)(: )(.*)( :)(.*)(:)" $expect_out(1,string) v1 v2 v3 v4 v5 v6 ] } { - return $v6$expect_out(5,string) - } else { - return $expect_out(5,string) - } - } else { - set rc -1 - } -} - -# -# PROCEDURE -# -# Declare procedure to ping the given server through the specified LAN adapter. -# The procedure will return 0 if the ping is successful, and 1 if the ping -# was unsuccessful. The global rc variable will be set if there's an error. -# - -proc ping_server { full_path_name phandle } { - - global spawn_id_rconsole - global expect_out - global server_ip - global client_ip - global gateway_ip - global list_type - global adap_speed - global adap_duplex - global command - global adap_prop_list - global rc - global PROGRAM - global NODENAME - global env - global mac_address - - nc_msg "$PROGRAM Status: ping_server start\n" - - if {[info exists env(FIRMWARE_DUMP)]} { - Firmware_Dump $full_path_name $phandle - } - - set j 0 - set tty_do_ping 0 - set stack_level 0 - set properties_matched 0 - set adap_conn "" - set speed_list {} - set duplex_list {} - set adap_conn_list {} - - # If the adapter type chosen is ethernet, need to set the speed and duplex - # of the adapter before we perform the ping. If token ring or fddi, - # this is not required, so begin with state 2. - # - # cmd(0) sets the given adapter as active, to allow setting of speed - # and duplex - # - # cmd(1) writes the settings to the current adapter - # - # cmd(2) selects the /packages/net node as the active package to access the - # ping command. - # - # The next command in cmd(3) is the ping command. This places the return code - # on the stack. A return code of 0 indicates success. - # - # state 0, set the current adapter - set done(0) 0 - set cmd(0) "dev $full_path_name\r" - set msg(0) "$PROGRAM Status: selected $full_path_name as the active adapter\n" - set pattern(0) ".*dev(.*)0 >(.*)" - set newstate(0) 1 - - # state 1, send property command to set selected type - set done(1) 0 - set cmd(1) "\" ethernet,$adap_speed,$adap_conn,$adap_duplex\" encode-string \" chosen-network-type\" property\r" - set msg(1) "$PROGRAM Status: chosen network type set\n" - set pattern(1) ".*ethernet(.*)0 >(.*)" - set newstate(1) 2 - - # state 2, activate /packages/net - set done(2) 0 - set cmd(2) "dev /packages/net\r" - set msg(2) "$PROGRAM Status: selected the /packages/net node as the active package\n" - set pattern(2) ".*dev(.*)ok(.*)0 >(.*)" - set newstate(2) 3 - - # state 3, ping the server - set done(3) 0 - set msg(3) "$PROGRAM Status: ping return code now on stack\n" - set newstate(3) 4 - #IPv6 - if { [regexp ":" $server_ip]!=0 } { - #::1, calculate link local address - if { [string compare "$client_ip" "::1"] == 0 } { - #set macaddr [get_mac_addr $phandle] - set linklocal_ip [exec /opt/xcat/share/xcat/tools/mac2linklocal -m $mac_address] - } else { - set linklocal_ip $client_ip - } - set cmd(3) "ping $full_path_name:ipv6,$server_ip,$linklocal_ip,$gateway_ip\r" - } else { - set cmd(3) "ping $full_path_name:$server_ip,$client_ip,$gateway_ip\r" - } - set pattern(3) ".*ping(.*)ok(.*)0 >(.*)" - - # state 4, all done - set done(4) 0 - set cmd(4) "0 to my-self\r" - set msg(4) "$PROGRAM Status: resetting pointer\n" - set pattern(4) "(.*)ok(.*)0 >(.*)" - set newstate(4) 5 - - # state 5, all done - set done(5) 1 - - # for ping, only need to set speed and duplex for ethernet adapters - # - if { $list_type == "ent" } { - set state 0 - - # Get the list of properties for this adapter - # - get_adap_prop $phandle - if { $rc != 0 } { - exit 1 - } - - if { [ llength $adap_prop_list ] == 0 } { - send_user "$PROGRAM: No properties found for adapter '$full_path_name'\n" - set rc 0 - return 1 - } - - # Now need to verify that the network params we were passed are valid for - # the given adapter - # - foreach prop $adap_prop_list { - regexp (.*),(.*),(.*) $prop dummy a_speed a_conn a_duplex - if { ( $a_speed == $adap_speed ) && ( $a_duplex == $adap_duplex ) } { - set properties_matched 1 - if { [ lsearch $adap_conn_list $a_conn ] == -1 } { - lappend adap_conn_list $a_conn - } - } - } - - if { $properties_matched == 0 } { - set adap_speed $a_speed - set adap_duplex $a_duplex - set properties_matched 1 - lappend adap_conn_list $a_conn - } - - set i [ llength $adap_conn_list ] - - if { $properties_matched == 0 } { - send_user "$PROGRAM: '$adap_speed/$adap_duplex' settings are not supported on this adapter\n" - set rc 0 - return 1 - } - } else { - set state 2 - } - - set timeout 300 - while { $done($state) == 0 } { - nc_msg "$PROGRAM Status: command is $cmd($state)\n" - set command $cmd($state) - - send_command - - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - nc_msg $msg($state) - set state $newstate($state) - - if { $state == 1 } { - set adap_conn [ lindex $adap_conn_list $j ] - set cmd(1) "\" ethernet,$adap_speed,$adap_conn,$adap_duplex\" encode-string \" chosen-network-type\" property\r" - nc_msg "$PROGRAM Status: Trying connector type $adap_conn\n" - incr j 1 - } - - if { ( ($tty_do_ping == 1) && ($state == 4) ) || ($tty_do_ping != 1) && ($state == 3) } { - set ping_debug $expect_out(buffer) - } - - - if { ( ($tty_do_ping == 1) && ($state == 5) ) || ($tty_do_ping != 1) && ($state == 4) } { - if { ($tty_do_ping == 1) && ($state == 5) } { - set ping_rc $expect_out(1,string) - set stack_level $expect_out(3,string) - } elseif { ($state == 4) && ($tty_do_ping != 1) && ([regexp "PING SUCCESS" $expect_out(buffer)]) } { - set ping_rc 0 - } elseif { [regexp "unknown word" $expect_out(buffer)] } { - nc_msg "$PROGRAM Status: try tty-do-ping.\n" - set ping_rc 1 - set tty_do_ping 1 - set state 3 - set cmd(3) "\" $full_path_name:$client_ip,$server_ip,$gateway_ip\" tty-do-ping\r" - set pattern(3) "(.*)ok(.*)(\[1-2\]) >(.*)" - - # state 4, get the return code off the stack - set done(4) 0 - set cmd(4) ".\r" - set msg(4) "$PROGRAM Status: return code displayed, stack empty\n" - set pattern(4) "(\[0-9\]*) ok(.*)(\[0-1\]) >(.*)" - set newstate(4) 5 - - # this command is used to work around a default catch problem in open - # firmware. Without it, a default catch occurs if we try to set - # adapter properties again after a ping - # - # state 5, reset pointer - set done(5) 0 - set cmd(5) "0 to my-self\r" - set msg(5) "$PROGRAM Status: resetting pointer\n" - set pattern(5) "(.*)ok(.*)0 >(.*)" - set newstate(5) 6 - - # state 6, all done - set done(6) 1 - } else { - set ping_rc 1 - } - - if { $ping_rc == 0 } { - send_user "# $full_path_name ping successful.\n" - } elseif { $ping_rc == 1 } { - send_user "# $full_path_name ping unsuccessful.\n" - nc_msg "# $full_path_name ping unsuccessful.\n" - nc_msg "$ping_debug\n" - - # An unsuccessful return may leave another item on the stack to - # be removed. Check for it, and remove if necessary - while { $stack_level != 0 } { - set command ".\r" - send_command - expect { - -i $spawn_id_rconsole - -re "(\[0-9\]*) ok(.*)(\[0-1\]) >(.*)" { - set stack_level $expect_out(3,string) - nc_msg "$PROGRAM Status: stack_level is <$stack_level>\n" - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set 1 - return - } - timeout { - send_user "$PROGRAM: Timeout in ping server\n" - set 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set 1 - return - } - } - } - # Check if there are any more adapter connector types - # to try - # - if { ( $list_type == "ent" ) && ( $j < $i ) } { - set adap_conn [ lindex $adap_conn_list $j ] - nc_msg "$PROGRAM Status: Trying connector type $adap_conn\n" - incr j 1 - - # Need to work around a default catch problem in open - # firmware by sending a "0 to my-self" instruction - # following the ping. To make sure this happens in - # this rare case where we have an adapter with multiple connectors, - # we have to force the instruction into the 0th slot in - # the array. This is OK, since we only set the current - # adapter once, upon entering this procedure. - # - set done(0) 0 - set cmd(0) "0 to my-self\r" - set msg(0) "$PROGRAM Status: resetting pointer\n" - set pattern(0) "(.*)ok(.*)0 >(.*)" - set newstate(0) 1 - - set state 0 - } - } else { - send_user "$PROGRAM: Unexpected ping return code\n" - set rc 1 - return - } - } - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout when pinging server\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } - set rc 0 - return $ping_rc -} - -# -# PROCEDURE -# -proc set_disk_boot {} { - global rc - global expect_out - global spawn_id_rconsole - global command - global PROGRAM - global NODENAME - global phandle_array - global full_path_name_array - global adapter_found - global adap_type - global sms_dev_array_loc - global sms_dev_array_name - global sms_dev_array_os - global sms_dev_array_os_ver - global colon - global list_physical - global boot_device - - # state 0, get SMS screen - set done(0) 0 - regexp "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Select Boot Options(\r)" $expect_out(0,string) x0 x1 x2 command - set cmd(0) "$command\r" - set msg(0) "$PROGRAM Status: sending return to repaint SMS screen\n" - set pattern(0) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Configure Boot Device Order(\r)" - set newstate(0) 1 - - # state 1, Multiboot - set done(1) 0 - set msg(1) "$PROGRAM Status: Multiboot\n" - set pattern(1) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Select 1st Boot Device(\r)" - set newstate(1) 2 - - # state 2, Configure Boot Device Order - set done(2) 0 - set msg(2) "$PROGRAM Status: Configure Boot Device Order" - set pattern(2) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Hard Drive(.*)" - set newstate(2) 3 - - # state 3, Select Device Type - set done(3) 0 - set msg(3) "$PROGRAM Status: Select Device Type" - set pattern(3) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)SCSI(.*)" - set newstate(3) 4 - - # state 4, Select Media Type - set done(4) 0 - set msg(4) "$PROGRAM Status: Select Media Type" - set pattern(4) "(\n)(\[ ])(\[1])(\[.])(\[ ]+)(\\S+)(.*)" - set newstate(4) 5 - - # state 5, Select Media Adapter - set done(5) 0 - set msg(5) "$PROGRAM Status: Select Media Adapter" - set pattern(5) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)(\\S)(\[ ]+)SCSI (\[0-9]+) MB Harddisk(.*)loc=(.*)\[)]" - set newstate(5) 6 - - # state 6, Select Device - set done(6) 0 - set msg(6) "$PROGRAM Status: Select Device" - set pattern(6) "(\n)(\[ ])(\[0-9])(\[.])(\[ ]+)Set Boot Sequence(.*)" - set newstate(6) 7 - - # state 7, Select Task - set done(7) 0 - set msg(7) "$PROGRAM Status: Select Task" - set pattern(7) "(.*)Current Boot Sequence(.*)" - set newstate(7) 8 - - # state 8, Return to Main Menu - set done(8) 0 - set cmd(8) "M" - set msg(8) "$PROGRAM Status: Restored Default Setting.\n" - set pattern(8) "(.*)Navigation key(.*)" - set newstate(8) 9 - - # state 9, Getting to SMS Main Menu - set done(9) 0 - set cmd(9) "0\r" - set msg(9) "$PROGRAM Status: Getting to SMS Main Menu.\n" - set pattern(9) "(.*)Exit SMS(.*)Prompt?(.*)" - set newstate(9) 10 - - # state 10, Exiting SMS - set done(10) 0 - set cmd(10) "Y" - set msg(10) "$PROGRAM Status: Exiting SMS.\n" - set pattern(10) "(.*)ok(.*)0 >(.*)" - set newstate(10) 11 - - # state 11, all done - set done(11) 1 - - set timeout 30 - set state 0 - while { $done($state) == 0 } { - set command $cmd($state) - send_command - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - if { $state == 4 } { - if { $expect_out(6,string) == "None" } { - set state 8 - } - } - - set state $newstate($state) - if { ($state != 8) && ($state != 9) && ($state != 10) } { - set cmd($state) "$expect_out(3,string)\r" - } - } - - -re "THE SELECTED DEVICES WERE NOT DETECTED IN THE SYSTEM" { - send_user "$PROGRAM Status: THE hard disk WERE NOT DETECTED IN THE SYSTEM!\n" - set rc 1 - #return - exit 1 - } - - - timeout { - send_user "$PROGRAM: Timeout in settin boot order\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } -} - - -################################################################### -# -# PROCEDURE -# -# Declare procedure to boot the system from the selected ethernet card. -# -# This routine does the following: -# 1. Initiates the boot across the network. (state 0 or 1) -# -# state 99 is normal exit and state -1 is error exit. -################################################################### -proc boot_network {} { - global rc - global spawn_id_rconsole - global full_path_name - global command - global speed - global duplex - global chosen_adap_type - global server_ip - global client_ip - global gateway_ip - global netmask - global dump_target - global dump_lun - global dump_port - global extra_args - global PROGRAM - global NODENAME - global set_boot_order - set rc 0 - set i 0 - - - nc_msg "$PROGRAM Status: boot_network start\n" - - ################################################################### - # Variables associated with each of the commands sent by this routine - # are defined below. - # - # The done variable is flag that is set to 1 to break out of the loop - # - # The cmd variable is the command to be sent to the chrp interface. - # In one case it set in the special processing code because the - # ihandle is not available then this code is executes. - # - # The msg variable contains the message sent after a successful pattern match - # - # The pattern variable is the pattern passed to expect - # - # The newstate variable indicates what command is to be issued next - ################################################################### - - # If the install adapter is Ethernet or Token Ring, set the speed and - # duplex during boot. - # state 0, stack count 0 - set done(0) 0 - if {$dump_target != ""} { - set net_device(0) "$full_path_name:iscsi,ciaddr=$client_ip,subnet-mask=$netmask,itname=dummy,iport=$dump_port,ilun=$dump_lun,iname=$dump_target,siaddr=$server_ip,2" - set pattern(0) "iSCSI" - } else { - if {$extra_args != "" } { - if { [regexp ":" $server_ip]!=0 } { #ipv6 - set net_device(0) "$full_path_name:ipv6,speed=$speed,duplex=$duplex,siaddr=$server_ip,ciaddr=$client_ip,giaddr=$gateway_ip,filename=$NODENAME,$extra_args" - } else { - set net_device(0) "$full_path_name:speed=$speed,duplex=$duplex,bootp,$server_ip,,$client_ip,$gateway_ip $extra_args" - } - } else { - if { [regexp ":" $server_ip]!=0 } { #ipv6 - set net_device(0) "$full_path_name:ipv6,speed=$speed,duplex=$duplex,siaddr=$server_ip,ciaddr=$client_ip,giaddr=$gateway_ip,filename=$NODENAME" - } else { - set net_device(0) "$full_path_name:speed=$speed,duplex=$duplex,bootp,$server_ip,,$client_ip,$gateway_ip" - } - } - set pattern(0) "BOOTP" - } - set cmd(0) "boot $net_device(0)\r" - set msg(0) "$PROGRAM Status: network boot initiated\n" - set newstate(0) 99 - - # If the install adapter is FDDI, don't set the speed and duplex - # state 1 - set done(1) 0 - set net_device(1) "$full_path_name:bootp,$server_ip,,$client_ip,$gateway_ip" - set cmd(1) "boot $net_device(1)\r" - set msg(1) "$PROGRAM Status: network boot initiated\n" - set pattern(1) "BOOTP" - set newstate(1) 99 - - # state 99, all done - set done(99) 1 - - # state -1, all done - set done(-1) 1 - - if { $chosen_adap_type == "fddi" } { - set state 1 - } else { - if { $speed == "" || $duplex == "" } { - send_user "$PROGRAM: Cannot set speed or duplex for network boot\n" - set rc 1 - return - } - set state 0 - } - - ################################################################## - # Set the boot device order. - ################################################################## - if { $set_boot_order > 0 } { - set done(2) 0 - set msg(2) "$PROGRAM Status: read original boot-device\n" - set cmd(2) "printenv boot-device\r" - set pattern(2) ".*boot-device\\s+(\\S+)(.*)ok(.*)" - set newstate(2) 3 - - set done(3) 0 - set msg(3) "$PROGRAM Status: set the environment variable boot-device\n" - set pattern(3) "(.*)ok(.*)(\[0-9]) >(.*)" - if { $state == 0 } { - set newstate(3) 0 - } else { - set newstate(3) 1 - } - set state 2 - } - - set timeout 30 ;# shouldn't take long - while { $done($state) == 0 } { - set command $cmd($state) - send_command - expect { - -i $spawn_id_rconsole - -nocase - -re $pattern($state) { - if { $state == 2 } { - if { $set_boot_order == 1 } { - ######################################## - # Set network as boot device - ######################################## - set cmd(3) "setenv boot-device $net_device($newstate(3))\r" - } elseif { $set_boot_order == 2 } { - ######################################## - # Set network as 1st boot device,disk as 2nd boot device - ######################################## - set boot_device_bk $expect_out(1,string) - set cmd(3) "setenv boot-device $net_device($newstate(3)) $boot_device_bk\r" - } elseif { $set_boot_order == 3 } { - ######################################## - # Set disk as 1st boot device,network as 2nd boot device - ######################################## - set boot_device_bk $expect_out(1,string) - set cmd(3) "setenv boot-device $boot_device_bk $net_device($newstate(3))\r" - } elseif { $set_boot_order == 4 } { - ######################################## - # set disk as boot device - ######################################## - set boot_device_bk $expect_out(1,string) - set cmd(3) "setenv boot-device $boot_device_bk\r" - } - } - nc_msg $msg($state) - set state $newstate($state) - } - -re "----" { - nc_msg $msg($state) - set state $newstate($state) - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout in boot network\n" - nc_msg "timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } -} - -# -# PROCEDURE -# -# -proc Boot {} { - global rc - global expect_out - global spawn_id_rconsole - global PROGRAM - global NODENAME - - set rc 0 - - nc_msg "$PROGRAM Status: waiting for the boot image to boot up.\n" - - set timeout 1200 ;# could take a while depending on configuration - - # check for bootp response error - expect { - -i $spawn_id_rconsole - -re "RESTART-CMD" { - # If we see a "problem doing RESTART-CMD" message, we re-hit the OPEN-DEV - # issue after firmware rebooted itself and we need to retry the netboot once more - send_user "$PROGRAM: The network boot ended in an error.\n" - send_user "$PROGRAM: Error : $RESTART-CMD\n" - set rc 5 - return - } - -nocase - -re {!([0-9A-F]+)} { - send_user "$PROGRAM: The network boot ended in an error.\n" - nc_msg $expect_out(buffer) - set rc 1 - return - } - -ex {BOOTP} { - nc_msg "$PROGRAM: # Network boot proceeding, exiting.\n" - } - -ex {------} { - nc_msg "$PROGRAM: # Network boot proceeding, exiting.\n" - } - -ex {iSCSI} { - nc_msg "$PROGRAM: # Network boot proceeding, exiting.\n" - } - timeout { - set mins [expr ($timeout/60)] - send_user "$PROGRAM: Timeout waiting for the boot image to boot up. \ - \n$PROGRAM waited '$mins' minutes for the boot image to boot. \ - \nEither the boot up has taken longer than expected or \ - \nthere is a problem with system boot. Check the boot \ - \nof the node to determine if there is a problem.\n" - nc_msg $expect_out(buffer) - set rc 1 - return - } - eof { - send_user "$PROGRAM: Port closed waiting for boot image to boot.\n" - set rc 1 - return - } - } -} - -################################################################### -# -# PROCEDURE -# -# Create multiple open-dev function in Open Firmware to try open -# a device. The original problem is a firmware issue which fails -# to open a device. This procedure will create multiple sub -# function in firmware to circumvent the problem. -# -################################################################### -proc multiple_open-dev {} { - global rc - global expect_out - global spawn_id_rconsole - global PROGRAM - global NODENAME - global comman - global env - global command - - set command "dev /packages/net \r" - send_command - - set command "FALSE value OPEN-DEV_DEBUG \r" - send_command - - if {[info exists env(OPEN_DEV_DEBUG)]} { - set command "TRUE to OPEN-DEV_DEBUG \r" - send_command - } - - set command ": new-open-dev ( str len -- true|false ) \ - open-dev_debug if cr .\" NEW-OPEN-DEV: Entering, Device : \" 2dup type cr then \ - { _str _len ; _n } \ - 0 -> _n \ - get-msecs dup d# 60000 + ( start timeout ) \ - begin \ - ( start timeout ) get-msecs over > if \ - open-dev_debug if \ - ( start timeout ) drop get-msecs swap - \ - cr .\" FAILED TO OPEN DEVICE\" \ - cr .\" NUMBER OF TRIES \" _n .d \ - cr .\" TIME ELAPSED \" ( time ) .d .\" MSECONDS\" cr \ - else \ - ( start timout ) 2drop \ - then \ - false exit \ - else \ - true \ - then \ - while \ - ( start timeout ) \ - _n 1 + -> _n \ - _str _len open-dev ( ihandle|false ) ?dup if \ - -rot ( ihandle start timeout ) \ - open-dev_debug if \ - ( start timeout ) drop get-msecs swap - \ - cr .\" SUCCESSFULLY OPENED DEVICE\" \ - cr .\" NUMBER OF TRIES \" _n .d \ - cr .\" TIME ELAPSED \" ( time ) .d .\" MSECONDS\" cr \ - else \ - ( start timeout ) 2drop \ - then \ - ( ihandle ) exit \ - then \ - ( start timeout ) \ - repeat \ - ; \r" - send_command - - set command " patch new-open-dev open-dev net-ping \r" - send_command - - set timeout 30 - expect { - -i $spawn_id_rconsole - -re "patch new-open-dev(.*)>" { - nc_msg "$PROGRAM Status: at End of multiple_open-dev \n" - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } -} - -################################################################### -# -# PROCEDURE -# -# Declare procedure to get additional firmware debug statement. -# -################################################################### -proc Firmware_Dump { device_path phandle } { - global rc - global expect_out - global spawn_id_rconsole - global PROGRAM - global NODENAME - global command - - nc_msg "$PROGRAM Status: Firmware_Dump start\n" - - # state 0 - set done(0) 0 - set cmd(0) "dev /packages/obp-tftp\r" - set msg(0) "$PROGRAM Status: selected /packages/obp_tftp\n" - set pattern(0) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(0) 1 - - # state 1 - set done(1) 0 - set cmd(1) ": testing1 .\" OBP-TFTP entry\" cr init-nvram-adptr-parms ;\r" - set msg(1) "$PROGRAM Status: running test - OBP-TFTP entry\n" - set pattern(1) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(1) 2 - - # state 2 - set done(2) 0 - set cmd(2) ": testing2 .\" OBP-TFTP exit, TRUE\" cr true ;\r" - set msg(2) "$PROGRAM Status: running test - OBP-TFTP exit\n" - set pattern(2) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(2) 3 - - # state 3 - set done(3) 0 - set cmd(3) "patch testing1 init-nvram-adptr-parms open\r" - set msg(3) "$PROGRAM Status: running test - patch testing1\n" - set pattern(3) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(3) 4 - - # state 4 - set done(4) 0 - set cmd(4) "patch testing2 true open\r" - set msg(4) "$PROGRAM Status: running test - patch testing2\n" - set pattern(4) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(4) 5 - - # state 5 - set done(5) 0 - set cmd(5) "dev $device_path\r" - set msg(5) "$PROGRAM Status: running test - dev $device_path\n" - set pattern(5) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(5) 6 - - # state 6 - set done(6) 0 - set cmd(6) "true to debug-init\r" - set msg(6) "$PROGRAM Status: running test - true to debug-init\n" - set pattern(6) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(6) 7 - - # state 7 - set done(7) 0 - set cmd(7) "true to debug-error\r" - set msg(7) "$PROGRAM Status: running test - true to debug-error\n" - set pattern(7) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(7) 8 - - # state 8 - set done(8) 0 - set cmd(8) "$phandle to active-package\r" - set msg(8) "$PROGRAM Status: running $phandle to active-package\n" - set pattern(8) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(8) 9 - - # state 9 - set done(9) 0 - set cmd(9) ".properties\r" - set msg(9) "$PROGRAM Status: running .properies\n" - set pattern(9) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(9) 10 - - # state 10 - set done(10) 0 - set cmd(10) "clear\r" - set msg(10) "$PROGRAM Status: running clear\n" - set pattern(10) "(.*)ok(.*)(\[0-9]) >(.*)" - set newstate(10) 11 - - # state 11, all done - set done(11) 1 - - set state 0 - set timeout 30 ;# shouldn't take long - while { $done($state) == 0 } { - set command $cmd($state) - nc_msg "$PROGRAM Status: command is $cmd($state)\n" - send_command - expect { - -i $spawn_id_rconsole - -re $pattern($state) { - nc_msg $msg($state) - set state $newstate($state) - } - -re "]" { - send_user "$PROGRAM: Unexpected prompt\n" - set rc 1 - return - } - -re "(.*)DEFAULT(.*)" { - send_user "$PROGRAM: Default catch error\n" - set rc 1 - return - } - timeout { - send_user "$PROGRAM: Timeout\n" - nc_msg "$PROGRAM Status: timeout state is $state\n" - set rc 1 - return - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - set rc 1 - return - } - } - } -} - - - -# -# Main MAIN main -# -set BINPATH "/opt/xcat/bin" -set PROGRAM "lpar_netboot" - -set CONSOLEBIN "/opt/xcat/bin/rcons" - -set noboot 0 ;# default is to boot -set Boot_timeout 3000 - -global expect_out -global loc_code -# Flags and initial variable -set discovery 0 -set discover_all 0 -set hdr_printed 0 -set verbose 0 -set discover_macaddr 0 -set rc 0 -set debug_flag 0 -set rmvterm_flag 0 -set immed_flag 0 -set from_of 0 -set dev_type_found 0 -set list_physical 0 -set set_boot_order 0 -set colon 0 -set choice 0 -set full_path_name "" -set adap_speed "" -set adap_duplex "" -set client_ip "" -set server_ip "" -set gateway_ip "" -set extra_args "" -set macaddress "" -set netmask "" -set dump_target "" -set dump_lun "" -set dump_port "" -set phys_loc "" -set userid "" -set passwd "" -set prompt "\\\$ \$" -set ssh_spawn_id 0 -set mac_address "" - -# List supported network adapters here. dev_pat is an array of regexp patterns -# the script searches for in the device tree listing. dev_type is the type -# of device displayed in the output. -set dev_pat(0) "ethernet" -set dev_type(0) "ent" -set dev_pat(1) "token-ring" -set dev_type(1) "tok" -set dev_pat(2) "fddi" -set dev_type(2) "fddi" -set dev_count [array size dev_pat] - -# -# Log the process id -# -set proc_id [ eval pid ] -nc_msg "$PROGRAM Status: process id is $proc_id\n" - -# -# -# Process command line options and parameters -# -# -while { [llength $argv] > 0} { - set flag [lindex $argv 0] - switch -glob -- $flag { - - "-A" { set discover_all 1 - set argv [lrange $argv 1 end] - } - - "-C" { set client_ip [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-D" { set discovery 1 - set argv [lrange $argv 1 end] - } - - "-G" { set gateway_ip [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-P" { set list_physical 1 - set argv [lrange $argv 1 end] - } - - "-M" { set discover_macaddr 1 - set argv [lrange $argv 1 end] - } - - "-N" { set netmask [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-S" { set server_ip [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-c" { set colon 1 - set argv [lrange $argv 1 end] - } - - "-d" { set adap_duplex [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-f" { set rmvterm_flag 1 - set argv [lrange $argv 1 end] - } - - "-g" { set extra_args [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-i" { set immed_flag 1 - set argv [lrange $argv 1 end] - } - - "-o" { set from_of 1 - set argv [lrange $argv 1 end] - } - - "-w" { set set_boot_order [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-L" { set dump_lun [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-l" { set phys_loc [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-m" { set macaddress [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-n" { set noboot 1 - set argv [lrange $argv 1 end] - } - - "-p" { set dump_port [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-s" { set adap_speed [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-T" { set dump_target [lindex $argv 1] - set argv [lrange $argv 2 end] - } - - "-t" { set list_type [lindex $argv 1] - set argv [lrange $argv 2 end] - - if { $list_type == "hfi-ent" } { - set dev_pat(0) "hfi-ethernet" - set dev_type(0) "hfi-ent" - } - - # - # Validate the argument - # - set dev_type_found 0 - foreach dev [array names dev_type] { - if {$dev_type($dev) == $list_type} { - set dev_type_found 1 - break - } - } - - if {$dev_type_found == 0 } { - send_user "$PROGRAM:$dev_type_found, '$list_type' is not a valid adapter choice\n" - exit 1 - } - } - - "-v" { set verbose 1 - set argv [lrange $argv 1 end] - } - - "-x" { set debug_flag 1 - set argv [lrange $argv 1 end] - } - - "--help" { - usage - } - - "-*" { send_user "$PROGRAM: Illegal option: $flag\n" - usage - } - - default {break} - } -} - -if { [llength $argv] < 1 } { - send_user "$PROGRAM: Missing parameter\n" - usage -} - -set arg0 [lindex $argv 0] -set arg1 [lindex $argv 1] - -if { [llength $argv] > 10 } { - send_user "$PROGRAM: Extraneous parameter(s)\n" - usage -} - -if { $list_physical == 0 } { - set dev_pat(3) "l-lan" - set dev_type(3) "ent" - set dev_count [array size dev_pat] -} else { - set dev_pat(3) "" - set dev_type(3) "" - set dev_count [array size dev_pat] -} - -if { $set_boot_order > 1 } { - set dev_pat(4) "scsi" - set dev_type(4) "disk" - set dev_count [array size dev_pat] -} - -set node [lindex $argv 0] -set profile [lindex $argv 1] -set manage [lindex $argv 2] -set lparid [lindex $argv 3] -set hcp [lindex $argv 4] -set name [lindex $argv 5] - -if {$dev_type_found} { nc_msg "$PROGRAM Status: List only $list_type adapters\n" } -if {$noboot} { nc_msg "$PROGRAM Status: -n (no boot) flag detected\n" } -if {$discovery} { nc_msg "$PROGRAM Status: -D (discovery) flag detected\n" } -if {$discover_all} { nc_msg "$PROGRAM Status: -A (discover all) flag detected\n" } -if {$verbose} { nc_msg "$PROGRAM Status: -v (verbose debug) flag detected\n" } -if {$discover_macaddr} { nc_msg "$PROGRAM Status: -M (discover mac address) flag detected\n" } -if {$immed_flag} { nc_msg "$PROGRAM Status: -i (force immediate shutdown) flag detected\n" } -if {$list_physical} { nc_msg "$PROGRAM Status: -P (list only phsical network) flag detected\n"} -if {$colon} { nc_msg "$PROGRAM Status: -c (list colon separated ) flag detected\n" } - -if {$debug_flag} { - nc_msg "$PROGRAM Status: -d (debug) flag detected\n" - exp_internal 1 - log_user 1 -} - -if {$discovery && $adap_speed != ""} { nc_msg "$PROGRAM Status: using adapter speed of $adap_speed\n" } -if {$discovery && $adap_duplex != ""} { nc_msg "$PROGRAM Status: using adapter duplex of $adap_duplex\n" } -if {$discovery && $server_ip != ""} { nc_msg "$PROGRAM Status: using server IP address of $server_ip\n" } -if {$discovery && $client_ip != ""} { nc_msg "$PROGRAM Status: using client IP address of $client_ip\n" } -if {$discovery && $gateway_ip != ""} { nc_msg "$PROGRAM Status: using gateway IP address of $gateway_ip\n" } -if {$discovery && $macaddress != ""} { nc_msg "$PROGRAM Status: using macaddress of $macaddress\n" } -if {$discovery && $phys_loc != ""} { nc_msg "$PROGRAM Status: using physical location code of $phys_loc\n" } - -nc_msg "node: $node\n" -nc_msg "name: $name\n" -set node $name - - -set NODENAME $node - -ck_args - -if {$extra_args != "" } { nc_msg "$PROGRAM Status: extra arguments sent to booting: $extra_args\n" } - -if { ! $noboot } { - set hdw_addr "" - set speed $adap_speed - set duplex $adap_duplex -} - -# Get userid and password -set userid $env(HCP_USERID) -set passwd $env(HCP_PASSWD) - -# -# Connect to the remote server -# -nc_msg "$PROGRAM Status: connecting to $hcp\n" -#connect -nc_msg "$PROGRAM Status: finished connecting to $hcp\n" - -# -# open the S1 serial port -# -nc_msg "$PROGRAM Status: open port\n" - -if [ catch { spawn $CONSOLEBIN $name -f } rsconole_pid ] { - send_user "Unable to spawn console connection to $hcp\n" - exit 1 -} - -set spawn_id_rconsole $spawn_id -nc_msg "$PROGRAM Status: spawn_id is $spawn_id\n" - -# -# Signal handling stuff -# -trap { - global PROGRAM - set signal SIG[trap -name] - send_user "$PROGRAM: Received signal named '$signal'\n" - exec kill -KILL $spawn_id_rconsole $ssh_spawn_id - exit -1 -} {INT HUP QUIT TERM} - -set timeout 30 -set pwd_sent 0 -send_user "# Connecting to $name\n" - -expect { - -i $spawn_id_rconsole \ - -re "Enter.* for help.*" { - send_user "# Connected\n" - } - timeout { - send_user "$PROGRAM: Timeout waiting for console connection\n" - exit 1 - } - eof { - send_user "$PROGRAM: Please make sure rcons $name works\n" - exit 1 - } -} - -send_user "# Checking for power off.\n" - -run_lssyscfg - -if { [string compare "$msg" "Not Available"] == 0 } { - send_user "$PROGRAM: LPAR is Not Available. Please make sure the CEC's state\n" - set rc 1 - exit 1 -} - -if { $from_of } { - if { ([string compare "$msg" "open-firmware"] != 0) && ([string compare "$msg" "Open Firmware"] != 0) } { - send_user "$PROGRAM: You used the -o option. Please make sure the LPAR's initial state is open firmware\n" - set rc 1 - exit 1 - - } -} - -if { $from_of != 1 } { -if { ([string compare "$msg" "Off"] == 0) || ([string compare "$msg" "off"] == 0) || ([string compare "$msg" "Not Activated"] == 0) } { - send_user "# Power off complete.\n" -} else { - - # - # power off the node - # - send_user "# Power off the node.\n" - set cmd "0" - - if { $immed_flag } { - #set cmd "chsysstate -r lpar -o shutdown -m \"$manage\" --immed -n \"$node\"" - set cmd [list exec $BINPATH/rpower $node off] - } else { - #set cmd "chsysstate -r lpar -o shutdown -m \"$manage\" -n \"$node\"" - set cmd [list exec $BINPATH/rpower $node off] - } - set timeout 120 - set rc [catch $cmd msg] - - if { $rc } { - send_user "$PROGRAM: Cannot power off $NODENAME\n" - nc_msg "$PROGRAM Status: error from rpower command\n" - send_user "$PROGRAM: Error : $msg\n" - exit 1 - } - - send_user "# Wait for power off.\n" - - # - # chsysstate will return a successful result if it was able to pass the power - # command from the IVM to the node, but the node may not be powered off yet. Need - # to query to make sure the node is off before we continue - # - set done 0 - set query_count 0 - while { ! $done } { - run_lssyscfg - - # - # separate the nodename from the query status - # - if { ([string compare "$msg" "Off"] == 0) || ([string compare "$msg" "off"] == 0) || ([string compare "$msg" "Not Activated"] == 0) } { - send_user "# Power off complete.\n" - set done 1 - continue - } - - incr query_count - if { $query_count > 300 } { - send_user "$PROGRAM: Timed out waiting for power off of $NODENAME\n" - nc_msg "$PROGRAM Status: error from rpower command : \"$msg\"\n" - exit 1 - } - - sleep 1 - } -} - - - -set done 0 -set retry_count 0 -if { $set_boot_order > 1 } { - send_user "$PROGRAM Status: Power on $NODENAME to SMS.\n" - set timeout 120 - while { ! $done } { - set cmd [list exec $BINPATH/rpower $node sms] - set rc [catch $cmd msg] - nc_msg "$PROGRAM Status: wait for power on\n" - - if { $rc } { - if { $retry_count == 3 } { - nc_msg "$PROGRAM Status: error from rpower command: $msg\n" - send_user "$PROGRAM Status: error from rpower command: $msg\n" - exit 1 - } - sleep 1 - incr retry_count - } else { - set done 1 - } - - } -} else { - send_user "# Power on $NODENAME to Open Firmware.\n" - set timeout 120 - while { ! $done } { - #send -i $ssh_spawn_id "chsysstate -r lpar -o on -b of -m \"$manage\" -n \"$node\" -f \"$profile\"; echo Rc=\$\?\r" - set cmd [list exec $BINPATH/rpower $node of] - set rc [catch $cmd msg] - nc_msg "$PROGRAM Status: wait for power on\n" - - if { $rc } { - if { $retry_count == 3 } { - nc_msg "$PROGRAM Status: error from rpower command: $msg\n" - send_user "$PROGRAM Status: error from rpower command: $msg\n" - exit 1 - } - sleep 1 - incr retry_count - } else { - set done 1 - } - - } -} - -nc_msg "$PROGRAM Status: wait for power on\n" - -if { $rc } { - send_user "$PROGRAM: Cannot power on $NODENAME\n" - nc_msg "$PROGRAM Status: error from rpower command\n" - send_user "$PROGRAM: Error : $msg\n" - exit 1 -} - -# -# Verify node is powered on before continuing -# -set done 0 -set query_count 0 -while { ! $done } { - run_lssyscfg - - # - # separate the nodename from the query status - # - if { ([string compare "$msg" "Open Firmware"] == 0) || ([string compare "$msg" "Open firmware"] == 0) || ([string compare "$msg" "open-firmware"] == 0) } { - send_user "# Power on complete.\n" - set done 1 - continue - } - - set timeout 1 - expect { - -i $spawn_id_rconsole - -re "(.*)elect this consol(.*)" { - nc_msg "$PROGRAM Status: selecting active console\n" - set command "0" - send_command - } - } - - incr query_count - - if { $query_count > 300 } { - send_user "$PROGRAM: Timed out waiting for power on of $NODENAME\n" - nc_msg "$PROGRAM Status: error from rpower command : \"$msg\" \n" - exit 1 - } - - sleep 1 -} -} -set retry 0 -set done 0 -set timeout 10 -nc_msg "$PROGRAM Status: Check for active console.\n" -while { ! $done } { - expect { - -i $spawn_id_rconsole - -re "ok(.*)0 >" { - nc_msg "$PROGRAM Status: at ok prompt\n" - set done 1 - } - -re "(.*)elect this consol(.*)" { - nc_msg "$PROGRAM Status: selecting active console\n" - set command "0" - send_command - } - -re "English|French|German|Italian|Spanish|Portuguese|Chinese|Japanese|Korean" { - nc_msg "$PROGRAM Status: Languagae Selection Panel received\n" - set command "2\r" - send_command - } - -re "'admin'" { - nc_msg "$PROGRAM Status: No password specified\n" - send_user "$PROGRAM: No password specified\n" - exit 1 - } - -re "Invalid Password" { - nc_msg "$PROGRAM Status: FSP password is invalid.\n" - send_user "$PROGRAM Status: FSP password is invalid.\n" - exit 1 - } - -re "SMS(.*)Navigation Keys" { - nc_msg "$PROGRAM Status: SMS\n" - set done 1 - } - - timeout { - set command "\r" - send_command - incr retry - if { $retry == 9 } { - send_user "$PROGRAM: Timeout waiting for ok prompt; exiting.\n" - exit 1 - } - } - eof { - send_user "$PROGRAM: Cannot connect to $NODENAME\n" - exit 1 - } - } -} - -if { $set_boot_order > 1 } { - set_disk_boot -} - -global phandle - -set done 0 -set retry 0 -exec sleep 1 -while { ! $done } { - # - # Call get_phandle to gather information for all the supported network adapters - # in the device tree. - # - get_phandle - - if { $rc } { - incr retry - set command "\r" - send_command - if { $retry == 3 } { - send_user "$PROGRAM: Unable to obtain network adapter information. Quitting.\n" - exit 1 - } - } else { - set done 1 - } -} - -# Call multiple_open-dev to circumvent firmware OPEN-DEV failure -multiple_open-dev -if { $rc } { - nc_msg "Unable to create multiple_open-dev.\n" - send_user "$PROGRAM: Unable to obtain network adapter information. Quitting.\n" - exit 1 -} - -if { $discovery } { - send_user "# Client IP address is $client_ip\n" - send_user "# Server IP address is $server_ip\n" - send_user "# Gateway IP address is $gateway_ip\n" -} - -if { $noboot } { # Display information for all supported adapters - - if {[info exists list_type]} { - set match_pat $list_type - } else { - set match_pat ".*" ;# match anything - } - - if { $colon } { - send_user "#Type:Location_Code:MAC_Address:Full_Path_Name:Ping_Result:Device_Type:Size_MB:OS:OS_Version:\n" - } else { - send_user "# Type \tLocation Code \tMAC Address\t Full Path Name\t Ping Result\n" - } - - - if { $discover_all } { - for {set i 1} {$i <= $adapter_found} {incr i 1} { - if {[regexp $match_pat $adap_type($i)] != 0 } { - if { $adap_type($i) != "hfi-ent" } { - set mac_address [get_mac_addr $phandle_array($i)] - set loc_code [get_adaptr_loc $phandle_array($i)] - } - - set ping_result "" - if { $discovery } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - nc_msg "$PROGRAM Status: ping_server returns $ping_rc\n" - if { $ping_rc != 0 } { - set ping_result "unsuccessful" - } else { - set ping_result "successful" - } - } - - if { $adap_type($i) == "hfi-ent" } { - set mac_address [get_mac_addr $phandle_array($i)] - set loc_code [get_adaptr_loc $phandle_array($i)] - } - - if { [string first "vdevice" "$full_path_name_array($i)"] != -1 } { - set device_type "virtual" - } else { - set device_type "physical" - } - - if { $colon } { - send_user "$adap_type($i)\:$loc_code\:$mac_address\:$full_path_name_array($i)\:$ping_result\:$device_type\:\:\:\:\n" - } else { - send_user "$adap_type($i) $loc_code $mac_address $full_path_name_array($i) $ping_result $device_type\n" - } - } - } - - } else { - for {set i 1} {$i <= $adapter_found} {incr i 1} { - if {[regexp $match_pat $adap_type($i)] != 0 } { - if { $adap_type($i) == "hfi-ent" } { - set mac_address [get_mac_addr $phandle_array($i)] - set loc_code [get_adaptr_loc $phandle_array($i)] - } - set ping_result "" - if { $discovery } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - nc_msg "$PROGRAM Status: ping_server returns $ping_rc\n" - if { $ping_rc != 0 } { - set ping_result "unsuccessful" - } else { - set ping_result "successful" - } - } - if { $adap_type($i) == "hfi-ent" } { - set mac_address [get_mac_addr $phandle_array($i)] - set loc_code [get_adaptr_loc $phandle_array($i)] - } - if { [string first "vdevice" "$full_path_name_array($i)"] != -1 } { - set device_type "virtual" - } else { - set device_type "physical" - } - - if { $colon } { - send_user "$adap_type($i)\:$loc_code\:$mac_address\:$full_path_name_array($i)\:$ping_result\:$device_type\:\:\:\:\n" - } else { - send_user "$adap_type($i) $loc_code $mac_address $full_path_name_array($i) $ping_result $device_type\n" - } - break; - } - } - } - - if { $from_of != 1 } { - - nc_msg "$PROGRAM Status: power off the node after noboot == 1\n" - set cmd "0" - - if { $immed_flag } { - #set cmd "chsysstate -r lpar -o shutdown -m \"$manage\" --immed -n \"$node\"" - set cmd [list exec $BINPATH/rpower $node off] - } else { - #set cmd "chsysstate -r lpar -o shutdown -m \"$manage\" -n \"$node\"" - set cmd [list exec $BINPATH/rpower $node off] - } - set timeout 120 - set rc [catch $cmd msg] - - if { $rc } { - send_user "$PROGRAM: Cannot power off $NODENAME\n" - nc_msg "$PROGRAM Status: error from rpower command\n" - send_user "$PROGRAM: Error : $msg\n" - exit 1 - } - } -} else { # Do a network boot - - # Loop throught the adapters and perform a ping test to discover an - # adapter that pings successfully, then use that adapter to network boot. - if { $discover_all == 1 } { - for {set i 1} {$i <= $adapter_found} {incr i 1} { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - - # if ping was successful, then use that adapter for lpar_netboot - if { $ping_rc == 0 } { - set phandle $phandle_array($i) - set full_path_name $full_path_name_array($i) - set chosen_adap_type $adap_type($i) - - break - } - } - } elseif { $macaddress != "" } { - set match 0 - for {set i 1} {$i <= $adapter_found} {incr i 1} { - if {[regexp "hfi-ent" $adap_type($i)] } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - } - set mac_address [get_mac_addr $phandle_array($i)] - if { [string first "$mac_address" "$macaddress"] != -1 } { - if { $discovery == 1 } { - if { $adap_type($i) != "hfi-ent" } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - } - if { $ping_rc != 0 } { - send_user "$PROGRAM: Unable to boot network adapter.\n" - exit 1 - } - } - set phandle $phandle_array($i) - set full_path_name $full_path_name_array($i) - set chosen_adap_type $adap_type($i) - set match 1 - break - } - } - if { !$match } { - send_user "$PROGRAM: Can not find mac address '$macaddress'\n" - exit 1 - } - } elseif { $phys_loc != "" } { - set match 0 - for {set i 1} {$i <= $adapter_found} {incr i 1} { - set loc_code [get_adaptr_loc $phandle_array($i)] - if { [string first "$phys_loc" "$loc_code"] != -1 } { - if { $discovery == 1 } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - if { $ping_rc != 0 } { - send_user "$PROGRAM: Unable to boot network adapter.\n" - exit 1 - } - } - set phandle $phandle_array($i) - set full_path_name $full_path_name_array($i) - set chosen_adap_type $adap_type($i) - set match 1 - break - } - } - if { !$match } { - send_user "$PROGRAM: Can not find physical location '$phys_loc'\n" - exit 1 - } - } else { - # - # Use the first ethernet adapter in the - # device tree. - # - for {set i 1} {$i <= $adapter_found} {incr i 1} { - if { $adap_type($i) == $list_type } { - if { $discovery == 1 } { - set ping_rc [ping_server $full_path_name_array($i) $phandle_array($i)] - if { $ping_rc != 0 } { - exit 1 - } - } - set phandle $phandle_array($i) - set full_path_name $full_path_name_array($i) - set chosen_adap_type $adap_type($i) - break - } - } - } - - if { $full_path_name == "" } { - send_user "$PROGRAM: Unable to boot network adapter.\n" - exit 1 - } else { - send_user "# Network booting install adapter.\n" - boot_network - } - - if { $rc == 0 } { - send_user "# bootp sent over network.\n" - - Boot - } else { - nc_msg "return code $rc from boot_network\n" - } - - if { $rc == 5} { - # Need to retry network boot because of intermittant network failure - # after partition reboot. Force partition to stop at Open Firmware prompt. - expect { - -i $spawn_id_rconsole - -re "keyboard" { - set command "8" - send_command - sleep 10 - } - timeout { - send_user "$PROGRAM: Timeout; exiting\n" - exit 1 - } - eof { - send_user "$PROGRAM: cannot connect to $NODENAME" - exit 1 - } - send_user "# Network booting install adapter.\n" - nc_msg "Retrying network-boot from RESTART-CMD error.\n" - set done 0 - while { ! $done } { - boot_network - if { $rc == 0 } { - set done 1 - } else { - # try again in 10 seconds - sleep 10 - } - } - } - send_user "# bootp sent over network.\n" - Boot - } -} - -# -# mission accomplished, beam me up scotty. -# -if { !$noboot } { - if { $rc == 0 } { - send_user "# Finished.\n" - } else { - send_user "# Finished in an error.\n" - } -} else { - set done 0 - set query_count 0 - while { ! $done } { - run_lssyscfg - - # - # separate the nodename from the query status - # - if { $from_of != 1 } { - if { ([string compare "$msg" "Off"] == 0) || ([string compare "$msg" "off"] == 0) || ([string compare "$msg" "Not Activated"] == 0) } { - set done 1 - } - } else { - if { ([string compare "$msg" "open-firmware"] == 0) || ([string compare "$msg" "Open Firmware"] == 0) } { - set done 1 - } - } - - incr query_count - if { $query_count > 60 } { - set done 1 - } - - sleep 1 - } -} - -set command "~." -send_command - -exit $rc diff --git a/xCAT-server/share/xcat/cons/blade.expect b/xCAT-server/share/xcat/cons/blade.expect deleted file mode 100755 index e4fe11cb7..000000000 --- a/xCAT-server/share/xcat/cons/blade.expect +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/env expect - -set timeout 45 - -set bcmm [lindex $argv 0] -set bayno [lindex $argv 1] -set username [lindex $argv 2] -set password [lindex $argv 3] -set cmdline "console -o -T blade\[$bayno\]" - -spawn telnet $bcmm -expect -re ".*username: " -send "$username\r" -expect -re ".*password: " -send "$password\r" -expect -re ".*system> " -send "$cmdline\r" -expect { - eof { - exit - } - -re ".*system> " { - sleep 5 - send "$cmdline\r" - } - "?" { - interact { - -o - "system> " { - sleep 5 - send "$cmdline\r" - } - } - } -} diff --git a/xCAT-server/share/xcat/cons/hpblade.expect b/xCAT-server/share/xcat/cons/hpblade.expect deleted file mode 100755 index 99ff947bb..000000000 --- a/xCAT-server/share/xcat/cons/hpblade.expect +++ /dev/null @@ -1,17 +0,0 @@ -#!/usr/bin/expect -f -# -# © Copyright 2009 Hewlett-Packard Development Company, L.P. -# EPL license http://www.eclipse.org/legal/epl-v10.html -# - -set send_slow {1 0.02} - -expect "" -sleep 5 - -send -s "vsp" -sleep 1 - -send "\r" - -exit 0 diff --git a/xCAT/xCAT.spec b/xCAT/xCAT.spec index 1c4100c08..fc6398257 100644 --- a/xCAT/xCAT.spec +++ b/xCAT/xCAT.spec @@ -24,7 +24,7 @@ Conflicts: xCATsn Requires: xCAT-server xCAT-client perl-DBD-SQLite %ifos linux -Requires: dhcp httpd nfs-utils expect nmap fping bind perl-XML-Parser vsftpd perl(CGI) +Requires: dhcp httpd nfs-utils nmap fping bind perl-XML-Parser vsftpd perl(CGI) Requires: /etc/xinetd.d/tftp %ifarch s390x # No additional requires for zLinux right now diff --git a/xCATsn/xCATsn.spec b/xCATsn/xCATsn.spec index 98d201d48..0cf43a7c6 100644 --- a/xCATsn/xCATsn.spec +++ b/xCATsn/xCATsn.spec @@ -25,7 +25,7 @@ Conflicts: xCAT %ifos linux # yaboot-xcat is pulled in so any SN can manage ppc nodes -Requires: dhcp httpd nfs-utils expect nmap fping bind perl-XML-Parser vsftpd +Requires: dhcp httpd nfs-utils nmap fping bind perl-XML-Parser vsftpd %ifarch ppc64 Requires: perl-IO-Stty %endif