add ping-all sample

git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@13666 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd

xCAT-IBMhpc/share/xcat/IBMhpc/ping-all/README.AIX

@@ -0,0 +1,44 @@
+Run as root on the EMS.
+
+This test uses xdsh and uses "lpar" for the node group. Use a different node group if desired.
+
+Note xdsh can leave behind processes if you do a <CNTRL-C> in the middle of a command.  
+To gaurd against results which are messed up by old copies of the ping test, kill
+any leftover ping processes.
+
+
+1)  Create the ping_address_file. This is only required if changes have been made since the last
+    run; e.g., octants deconfigured, ARP entries changed, etc.
+
+    "./create_ping_address_file [interface]"    
+
+    If the "interface" argument is not provided, it defaults to "ml0" as the interface to test.
+
+    Remove any nodes you don't want to run the ping test.
+
+2)  Copy "ping_address_file" to /tmp on each node:
+
+    xdcp lpar -v ping_address_file /tmp
+
+3)  Copy "ping_all" to /tmp on each node:
+
+    xdcp lpar -v ping_all /tmp
+     
+4)  Remove any output files from previous runs:
+
+    xdsh lpar -v "rm /tmp/ping.all.out 2>/dev/null"
+
+5)  Run the ping test:
+
+    "./start_ping_all"
+
+    Each node in the test will write any ping failures to "/tmp/ping.all.out" (local /tmp on each node).
+    (No "ping.all.out" file indicates no ping failures.)
+
+6)  To determine if we have ping failures:
+
+    xdsh lpar -v "ls -l /tmp/ping.all.out 2>/dev/null" | sort -n +5
+
+    If a given set of "ping.all.out" files are the same length, it's likely they will have 
+    duplicate ping failures.
+

xCAT-IBMhpc/share/xcat/IBMhpc/ping-all/create_ping_address_file

@@ -0,0 +1,10 @@
+#!/bin/ksh
+if [[ -n $1 ]] then
+    interface=$1
+else 
+    interface=ml0
+fi
+
+xdsh lpar -v "/usr/sbin/ifconfig $interface | grep inet | cut -d':' -f2   | cut -d' ' -f2 | head -2 " | sort -n | tee ping_address_file  
+
+

xCAT-IBMhpc/share/xcat/IBMhpc/ping-all/ping_address_file.sample

@@ -0,0 +1,4 @@
+c250f08c01ap01: 30.8.1.1
+c250f08c01ap05: 30.8.1.5
+c250f08c01ap09: 30.8.1.9
+c250f08c01ap13: 30.8.1.13

xCAT-IBMhpc/share/xcat/IBMhpc/ping-all/ping_all

@@ -0,0 +1,88 @@
+#!/bin/ksh
+
+function do_pings {
+    #set -x 
+
+    integer dest_array_index=0
+    integer total_ping_count=0
+    integer ping_loop_count=0
+    integer tmp_fail_int=0
+    integer total_fails=0
+
+    dest_array_index=0
+    ping_loop_count=ping_loop_count+1
+
+    cat $file | grep -v "^#" |
+    while read input_file_line ; do
+        switch_dest=$( print $input_file_line | awk ' { print $2 } ' )
+        netstat -in | grep -q "$switch_dest "
+        if [[ $? -ne 0 ]] then
+            dest_hostname=$( print $input_file_line | awk ' { print $1 } ' )
+            dest_array_index=dest_array_index+1
+            total_ping_count=total_ping_count+1
+
+            #ping -c 2 $switch_dest | grep "100% packet loss"
+            #echo `hostname` pinging $switch_dest
+            ping -f -c 10 $switch_dest | grep -q "100% packet loss"
+            if [[ $? -eq 0 ]] then
+                total_fails=total_fails+1
+
+                #hack for now to try to clear bad ml0 routes
+                #echo  "`hostname -s`:removing $switch_dest from ml route table to attempt route refresh"
+                /usr/sbin/mltdd_dump -d $switch_dest
+                #remove following comment to print data back to (typically NFS mounted) common dir
+
+                ##### To remove write output to NFS output, you can comment the following line
+                #ping -f -c 10 $switch_dest | grep "100% packet loss"
+
+                ping -f -c 10 $switch_dest | grep "100% packet loss" >> /tmp/ping.all.out
+
+                dest_failures[$dest_array_index]=${dest_failures[dest_array_index]}+1
+                tmp_fail_int=${dest_failures[dest_array_index]}
+                total_fail_rate=$(print "$total_fails/$total_ping_count*100" | bc -l | awk ' { printf(" %4.2f\n", $0 ) } ' )
+                dest_fail_rate=$(print "$tmp_fail_int/$ping_loop_count*100" | bc -l | awk ' { printf(" %4.2f\n", $0 ) } ')
+
+                ##### To remove write output to NFS output, you can comment the following line
+                #print "failure to $dest_hostname $switch_dest total: $total_fail_rate cur: $dest_array_index $dest_fail_rate num_pings: $ping_loop_count"
+
+                print "failure to $dest_hostname $switch_dest total: $total_fail_rate cur: $dest_array_index $dest_fail_rate num_pings: $ping_loop_count" >> /tmp/ping.all.out
+            fi
+
+        fi
+    done
+}
+
+#main
+unset found_flag
+rm /tmp/ping.all.out 2>/dev/null
+
+if [[ -z $1 ]] then
+   file=ping_address_file
+else
+   file=$1
+fi
+
+ifconfig -a  | grep 'inet ' | awk ' { print $2 } ' | grep -v 127.0.0.1 | 
+while read my_address ; do
+    ##print "checking $my_address"
+    grep -q " ${my_address}$" $file
+    if [[ $? -eq 0 ]] then
+        ##print "Found my address: $my_address"
+        integer starting_line=$(grep -n " $my_address$" $file | awk -F ":" ' { print $1 } ' )
+        integer starting_line_minus_1=$starting_line-1
+        tail +${starting_line} $file         >  /tmp/current_ping_address_file
+        head -${starting_line_minus_1} $file >> /tmp/current_ping_address_file
+        file=/tmp/current_ping_address_file 
+        do_pings
+        found_flag=1
+        break
+    fi
+done
+
+if [[ -z $found_flag ]] then
+    print "Unable to find my entry in the $file for host: $(hostname -s)"
+    exit 1
+fi
+
+rm /tmp/current_ping_address_file 2>/dev/null
+exit 0

xCAT-IBMhpc/share/xcat/IBMhpc/ping-all/start_ping_all

@@ -0,0 +1,4 @@
+#!/bin/ksh
+
+xdsh lpar -v "cd /tmp; ./ping_all ./ping_address_file"
+