diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/buildkit.conf b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/buildkit.conf deleted file mode 100644 index b99c67f5e..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/buildkit.conf +++ /dev/null @@ -1,307 +0,0 @@ -# Kit Build File -# -# This file was initially auto-generated by the buildkit CLI command. -# To create a new kit, the user should modify this file accordingly. -# Refer to the buildkit manpage for further details. -# - -# kit: This section defines general info for the Kit. -# There must be exactly one kit section in a kit build file. -# -# kit attributes: -# basename (mandatory) Kit base name. e.g., kit-lsf -# description (optional) Kit description. -# version (mandatory) Kit version. e.g., 1.0 -# ostype (mandatory) Kit OS type. Must be Linux. -# AIX is currently not supported. -# isinternal (optional) PCM use only. -# Indicate if Kit is for internal use. -# Use 1 for yes, 0 for no. Default: 0 -# kitdeployparams (optional) Filename containing a list of kit deployment -# parameters, relative to -# /other_files -kit: - basename=teal - description=teal for Linux - version=1.2.0.2 - ostype=Linux - kitlicense=ILAN -# kitdeployparams= - - -# kitrepo: This section defines a Kit Package Repository. -# There must be at least one kitrepo section in a kit build file. -# If you want to support multiple OSes, you should create a separate -# repo for each OS. Also, no two repos can be defined with the same -# OS name, major/minor version and arch. For example, you cannot have -# two repos for RHEL 6.2 ppc64 in the same kit. -# -# kitrepo attributes: -# kitrepoid (mandatory) Kit package repository ID. -# Must be unique within this file. -# osbasename (mandatory) OS distro base name. e.g., rhels. -# osmajorversion (mandatory) OS major version. e.g., 6 -# osminorversion (optional) OS minor version. -# osarch (mandatory) OS architecture. e.g., ppc64 -# compat_osbasenames (optional) Comma-separated list of compatible -# OS distro base names. e.g., centos - -kitrepo: - kitrepoid=rhels6_ppc64 - osbasename=rhels - osmajorversion=6 - osarch=ppc64 - -kitrepo: - kitrepoid=sles11_ppc64 - osbasename=sles - osmajorversion=11 - osarch=ppc64 - - -# kitcomponent: This section defines one Kit Component. -# There can be zero or more kitcomponent sections. -# If you want to build a component which supports multiple OSes, -# you should create one kitcomponent section for each OS. -# Also, no two components in a kit can be defined with the same -# base name. -# You can define multiple kit components with the same base name -# only if each kit component using this base name meets these -# requirements: -# - Each kit component must be defined with the same version -# and release number -# - Each kit component must be defined with a unique kitrepoid - -# -# kitcomponent attributes: -# basename (mandatory) Kit component base name -# description (optional) Kit component description -# version (mandatory) Kit component version -# release (mandatory) Kit component release -# serverroles (mandatory) Comma-separated list of servers that this -# component can install on. Valid values: -# mgtnode,servicenode,mgtnode,loginnode,storagenode -# kitrepoid (mandatory) The ID of the kit package repository this -# component belongs to -# kitcompdeps (optional) Comma-separated list of kit component -# dependencies. These kit components can be included in -# this kit or in other kits. -# ospkgdeps (optional) Comma-separated list of OS package dependencies -# These packages must be shipped with the OS distro. -# kitpkgdeps (optional) Comma-separated list of kit package names that -# will be listed as "REQUIRES" when building this kit -# component. Each package must be defined in a separate -# kitpackage section. Each package must be in the same -# kitrepo as this kit component. -# non_native_pkgs (optional) TBD -- NOT SUPPORTED YET! -# Comma-separated list of non-native package -# paths that will be included as files in this kit -# component. All filenames are relative to -# /source_packages -# Kit component deployment scripts must be specified -# to manage these files. -# driverpacks (optional) Comma-separated list of driver package filenames -# Each driverpack must be defined in a separate kitpackage -# section. -# exlist (optional) Exclude list file for stateless image, relative -# to /other_files -# Kit component deployment scripts (optional) Each attribute specifies -# script path relative to /scripts -# Script attributes: -# preinstall, postinstall, preuninstall, postuninstall, -# preupgrade, postupgrade, postbootscripts -kitcomponent: - basename=teal-base - description=teal for management nodes - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-base >= 1.2.0.2 - -kitcomponent: - basename=teal-isnm - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-test >= 1.2.0.2 - -kitcomponent: - basename=teal-base - description=teal for management nodes - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-base >= 1.2.0.2 - -kitcomponent: - basename=teal-isnm - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-test >= 1.2.0.2 - -# kitpackage: This section defines one Kit Package, and how to build it. -# There can be zero or more kitpackage sections. -# All filenames should be relative paths to -# /source_packages -# If you want to build a package which can run on multiple OSes, -# you have two options: -# 1. Build a separate package for each OS you want to support. -# For this option, you need to define one kitpackage section -# per supported OS. -# 2. Build one package that can run on multiple OSes. -# If you are building an RPM package, you are responsible for -# creating an RPM spec file that can run on multiple OSes. -# For this option, you need to define one kitpackage section -# which contains multiple kitrepoid lines. -# -# kitpackage attributes: -# filename (mandatory) Package filename -# kitrepoid (mandatory) The repo(s) this package belongs to. -# If multiple repos are defined, the package will be built for -# the first repo only. For the other repos, a symlink is created -# to the package built for the first repo. -# Package build methods (optional) -# Define how to build the packages. -# If you don't specify a build method, the default behavior is -# to assume the package is pre-built under -# /source_packages -# All files in this section are relative to -# /source_packages -# There are four methods to build packages. -# 1. Use pre-built RPM package -# isexternalpkg: 'no'|'0', 'yes'|'1' (default: 'no') -# Indicates whether the RPM package will be added to the -# the kit tar file now as part of the kit build process, -# or whether the customer will need to separately -# obtain the RPM pacakage and add it to the kit tar file -# using 'buildkit addpkgs' -# rpm_prebuiltdir: If isexternalpkg=yes, path to directory -# containing pre-built RPM package -# 2. Build RPM from spec + src dir -# rpm_spec: Path to spec file. -# rpm_srcdir: Path to source directory. -# 3. Build RPM from spec + src tarball -# rpm_spec: Path to spec file. -# rpm_srctarball: Path to source tarball. -# 4. Build RPM from source RPM -# rpm_srpm: Path to source RPM package. -kitpackage: - filename=teal-base-1.2.0.2-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-isnm-1.2.0.1-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-ll-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-pnsd-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-sfp-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-test-1.2.0.2-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/buildkit.conf b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/buildkit.conf similarity index 85% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/buildkit.conf rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/buildkit.conf index 9dadf266b..11f9b652b 100644 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/buildkit.conf +++ b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/buildkit.conf @@ -21,9 +21,10 @@ # parameters, relative to # /other_files kit: - basename=teal + basename=teal-rhel description=teal for Linux version=1.2.0.2 + release=1 ostype=Linux kitlicense=ILAN # kitdeployparams= @@ -52,12 +53,6 @@ kitrepo: osmajorversion=6 osarch=x86_64 -kitrepo: - kitrepoid=sles11_x86_64 - osbasename=sles - osmajorversion=11 - osarch=x86_64 - # kitcomponent: This section defines one Kit Component. # There can be zero or more kitcomponent sections. @@ -119,6 +114,26 @@ kitcomponent: kitrepoid=rhels6_x86_64 kitpkgdeps=teal-base >= 1.2.0.2 +kitcomponent: + basename=teal-gpfs + description=teal for gpfs + version=1.2.0.2 + release=1 + serverroles=mgtnode + kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base + kitpkgdeps=teal-gpfs >= 1.2.0.2,teal-gpfs-sn >= 1.2.0.2 + +kitcomponent: + basename=teal-ib + description=teal for ib + version=1.2.0.2 + release=1 + serverroles=mgtnode + kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base + kitpkgdeps=teal-ib >= 1.2.0.2 + kitcomponent: basename=teal-isnm description=teal for isnm @@ -126,6 +141,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-isnm >= 1.2.0.1 kitcomponent: @@ -135,6 +151,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-isnm >= 1.2.0.0 kitcomponent: @@ -153,8 +170,19 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-sfp >= 1.2.0.0 +kitcomponent: + basename=teal-syslog + description=teal for syslog + version=1.2.0.2 + release=1 + serverroles=mgtnode + kitrepoid=rhels6_x86_64 + kitcompdeps=teal-base + kitpkgdeps=teal-syslog >= 1.2.0.2 + kitcomponent: basename=teal-test description=teal test @@ -162,60 +190,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-test >= 1.2.0.2 - -kitcomponent: - basename=teal-base - description=teal for management nodes - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 - kitpkgdeps=teal-base >= 1.2.0.2 - -kitcomponent: - basename=teal-isnm - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-test >= 1.2.0.2 # kitpackage: This section defines one Kit Package, and how to build it. @@ -265,43 +240,65 @@ kitcomponent: # 4. Build RPM from source RPM # rpm_srpm: Path to source RPM package. kitpackage: - filename=teal-base-1.2.0.2-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-base-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-gpfs-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-gpfs-sn-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-ib-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-isnm-1.2.0.1-*.x86_64.rpm + kitrepoid=rhels6_x86_64 # Method 1: Use pre-built RPM package isexternalpkg=yes kitpackage: - filename=teal-isnm-1.2.0.1-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-ll-1.2.0.0-*.x86_64.rpm + kitrepoid=rhels6_x86_64 # Method 1: Use pre-built RPM package isexternalpkg=yes kitpackage: - filename=teal-ll-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-pnsd-1.2.0.0-*.x86_64.rpm + kitrepoid=rhels6_x86_64 # Method 1: Use pre-built RPM package isexternalpkg=yes kitpackage: - filename=teal-pnsd-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-sfp-1.2.0.0-*.x86_64.rpm + kitrepoid=rhels6_x86_64 # Method 1: Use pre-built RPM package isexternalpkg=yes +kitpackage: + filename=teal-syslog-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes kitpackage: - filename=teal-sfp-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 - # Method 1: Use pre-built RPM package - isexternalpkg=yes - - -kitpackage: - filename=teal-test-1.2.0.2-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-test-1.2.0.2-*.x86_64.rpm + kitrepoid=rhels6_x86_64 # Method 1: Use pre-built RPM package isexternalpkg=yes diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/docs/index.html b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/docs/index.html new file mode 100644 index 000000000..cd2e6995d --- /dev/null +++ b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/docs/index.html @@ -0,0 +1,9 @@ + + +Teal Documentation + + +Redirecting to: +https://sourceforge.net/apps/mediawiki/pyteal/index.php?title=Main_Page + + diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/plugins/sample/imageprofile.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/plugins/sample/imageprofile.pm similarity index 100% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/plugins/sample/imageprofile.pm rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/plugins/sample/imageprofile.pm diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/plugins/sample/nodemgmt.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/plugins/sample/nodemgmt.pm similarity index 100% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-ppc64/plugins/sample/nodemgmt.pm rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-rhel-1.2.0-2-x86_64/plugins/sample/nodemgmt.pm diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/buildkit.conf b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/buildkit.conf similarity index 83% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/buildkit.conf rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/buildkit.conf index 1520be8d2..3bf872bb4 100644 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/buildkit.conf +++ b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/buildkit.conf @@ -21,9 +21,10 @@ # parameters, relative to # /other_files kit: - basename=teal + basename=teal-sles description=teal for Linux version=1.2.0.2 + release=1 ostype=Linux kitlicense=ILAN # kitdeployparams= @@ -46,12 +47,6 @@ kit: # compat_osbasenames (optional) Comma-separated list of compatible # OS distro base names. e.g., centos -kitrepo: - kitrepoid=rhels6_x86_64 - osbasename=rhels - osmajorversion=6 - osarch=x86_64 - kitrepo: kitrepoid=sles11_x86_64 osbasename=sles @@ -116,62 +111,29 @@ kitcomponent: version=1.2.0.2 release=1 serverroles=mgtnode - kitrepoid=rhels6_x86_64 + kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-base >= 1.2.0.2 kitcomponent: - basename=teal-isnm - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_x86_64 - kitpkgdeps=teal-test >= 1.2.0.2 - -kitcomponent: - basename=teal-base - description=teal for management nodes + basename=teal-gpfs + description=teal for gpfs version=1.2.0.2 release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 - kitpkgdeps=teal-base >= 1.2.0.2 + kitcompdeps=teal-base + kitpkgdeps=teal-gpfs >= 1.2.0.2,teal-gpfs-sn >= 1.2.0.2 + +kitcomponent: + basename=teal-ib + description=teal for ib + version=1.2.0.2 + release=1 + serverroles=mgtnode + kitrepoid=sles11_x86_64 + kitcompdeps=teal-base + kitpkgdeps=teal-ib >= 1.2.0.2 kitcomponent: basename=teal-isnm @@ -180,6 +142,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-isnm >= 1.2.0.1 kitcomponent: @@ -189,6 +152,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-isnm >= 1.2.0.0 kitcomponent: @@ -198,6 +162,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-pnsd >= 1.2.0.0 kitcomponent: @@ -207,8 +172,19 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-sfp >= 1.2.0.0 +kitcomponent: + basename=teal-syslog + description=teal for syslog + version=1.2.0.2 + release=1 + serverroles=mgtnode + kitrepoid=sles11_x86_64 + kitcompdeps=teal-base + kitpkgdeps=teal-syslog >= 1.2.0.2 + kitcomponent: basename=teal-test description=teal test @@ -216,6 +192,7 @@ kitcomponent: release=1 serverroles=mgtnode kitrepoid=sles11_x86_64 + kitcompdeps=teal-base kitpkgdeps=teal-test >= 1.2.0.2 # kitpackage: This section defines one Kit Package, and how to build it. @@ -254,7 +231,7 @@ kitcomponent: # or whether the customer will need to separately # obtain the RPM pacakage and add it to the kit tar file # using 'buildkit addpkgs' -# rpm_prebuiltdir: If isexternalpkg=no, path to directory +# rpm_prebuiltdir: If isexternalpkg=yes, path to directory # containing pre-built RPM package # 2. Build RPM from spec + src dir # rpm_spec: Path to spec file. @@ -265,43 +242,65 @@ kitcomponent: # 4. Build RPM from source RPM # rpm_srpm: Path to source RPM package. kitpackage: - filename=teal-base-1.2.0.2-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-base-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes + +kitpackage: + filename=teal-gpfs-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes kitpackage: - filename=teal-isnm-1.2.0.1-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-gpfs-sn-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes kitpackage: - filename=teal-ll-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-ib-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes kitpackage: - filename=teal-pnsd-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-isnm-1.2.0.1-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes + kitpackage: - filename=teal-sfp-1.2.0.0-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-ll-1.2.0.0-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes + kitpackage: - filename=teal-test-1.2.0.2-1.x86_64.rpm - kitrepoid=rhels6_x86_64,sles11_x86_64 + filename=teal-pnsd-1.2.0.0-*.x86_64.rpm + kitrepoid=sles11_x86_64 # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= + isexternalpkg=yes + + +kitpackage: + filename=teal-sfp-1.2.0.0-*.x86_64.rpm + kitrepoid=sles11_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-syslog-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + +kitpackage: + filename=teal-test-1.2.0.2-*.x86_64.rpm + kitrepoid=sles11_x86_64 + # Method 1: Use pre-built RPM package + isexternalpkg=yes + diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/docs/index.html b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/docs/index.html new file mode 100644 index 000000000..cd2e6995d --- /dev/null +++ b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/docs/index.html @@ -0,0 +1,9 @@ + + +Teal Documentation + + +Redirecting to: +https://sourceforge.net/apps/mediawiki/pyteal/index.php?title=Main_Page + + diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/plugins/sample/imageprofile.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/plugins/sample/imageprofile.pm similarity index 100% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/plugins/sample/imageprofile.pm rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/plugins/sample/imageprofile.pm diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/plugins/sample/nodemgmt.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/plugins/sample/nodemgmt.pm similarity index 100% rename from xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-x86_64/plugins/sample/nodemgmt.pm rename to xCAT-buildkit/share/xcat/kits/kit_build/teal/partial-teal-sles-1.2.0-2-x86_64/plugins/sample/nodemgmt.pm diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/buildkit.conf b/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/buildkit.conf deleted file mode 100644 index d384bd6ac..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/buildkit.conf +++ /dev/null @@ -1,308 +0,0 @@ -# Kit Build File -# -# This file was initially auto-generated by the buildkit CLI command. -# To create a new kit, the user should modify this file accordingly. -# Refer to the buildkit manpage for further details. -# - -# kit: This section defines general info for the Kit. -# There must be exactly one kit section in a kit build file. -# -# kit attributes: -# basename (mandatory) Kit base name. e.g., kit-lsf -# description (optional) Kit description. -# version (mandatory) Kit version. e.g., 1.0 -# ostype (mandatory) Kit OS type. Must be Linux. -# AIX is currently not supported. -# isinternal (optional) PCM use only. -# Indicate if Kit is for internal use. -# Use 1 for yes, 0 for no. Default: 0 -# kitdeployparams (optional) Filename containing a list of kit deployment -# parameters, relative to -# /other_files -kit: - basename=teal - description=teal for Linux - version=1.2.0.2 - ostype=Linux - kitlicense=ILAN -# kitdeployparams= - - -# kitrepo: This section defines a Kit Package Repository. -# There must be at least one kitrepo section in a kit build file. -# If you want to support multiple OSes, you should create a separate -# repo for each OS. Also, no two repos can be defined with the same -# OS name, major/minor version and arch. For example, you cannot have -# two repos for RHEL 6.2 ppc64 in the same kit. -# -# kitrepo attributes: -# kitrepoid (mandatory) Kit package repository ID. -# Must be unique within this file. -# osbasename (mandatory) OS distro base name. e.g., rhels. -# osmajorversion (mandatory) OS major version. e.g., 6 -# osminorversion (optional) OS minor version. -# osarch (mandatory) OS architecture. e.g., ppc64 -# compat_osbasenames (optional) Comma-separated list of compatible -# OS distro base names. e.g., centos - -kitrepo: - kitrepoid=rhels6_ppc64 - osbasename=rhels - osmajorversion=6 - osarch=ppc64 - -kitrepo: - kitrepoid=sles11_ppc64 - osbasename=sles - osmajorversion=11 - osarch=ppc64 - - -# kitcomponent: This section defines one Kit Component. -# There can be zero or more kitcomponent sections. -# If you want to build a component which supports multiple OSes, -# you should create one kitcomponent section for each OS. -# Also, no two components in a kit can be defined with the same -# base name. -# You can define multiple kit components with the same base name -# only if each kit component using this base name meets these -# requirements: -# - Each kit component must be defined with the same version -# and release number -# - Each kit component must be defined with a unique kitrepoid - -# -# kitcomponent attributes: -# basename (mandatory) Kit component base name -# description (optional) Kit component description -# version (mandatory) Kit component version -# release (mandatory) Kit component release -# serverroles (mandatory) Comma-separated list of servers that this -# component can install on. Valid values: -# mgtnode,servicenode,mgtnode,loginnode,storagenode -# kitrepoid (mandatory) The ID of the kit package repository this -# component belongs to -# kitcompdeps (optional) Comma-separated list of kit component -# dependencies. These kit components can be included in -# this kit or in other kits. -# ospkgdeps (optional) Comma-separated list of OS package dependencies -# These packages must be shipped with the OS distro. -# kitpkgdeps (optional) Comma-separated list of kit package names that -# will be listed as "REQUIRES" when building this kit -# component. Each package must be defined in a separate -# kitpackage section. Each package must be in the same -# kitrepo as this kit component. -# non_native_pkgs (optional) TBD -- NOT SUPPORTED YET! -# Comma-separated list of non-native package -# paths that will be included as files in this kit -# component. All filenames are relative to -# /source_packages -# Kit component deployment scripts must be specified -# to manage these files. -# driverpacks (optional) Comma-separated list of driver package filenames -# Each driverpack must be defined in a separate kitpackage -# section. -# exlist (optional) Exclude list file for stateless image, relative -# to /other_files -# Kit component deployment scripts (optional) Each attribute specifies -# script path relative to /scripts -# Script attributes: -# preinstall, postinstall, preuninstall, postuninstall, -# preupgrade, postupgrade, postbootscripts -kitcomponent: - basename=teal-base_mgtnode - description=teal for management nodes - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - ospkgdeps=pyodbc >= 2.1.7,xCAT >= 2.6.6 - kitpkgdeps=teal-base >= 1.2.0.2 - -kitcomponent: - basename=teal-isnm_mgtnode - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll_mgtnode - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd_mgtnode - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp_mgtnode - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test_mgtnode - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=rhels6_ppc64 - kitpkgdeps=teal-test >= 1.2.0.2 - -kitcomponent: - basename=teal-base_mgtnode - description=teal for management nodes - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-base >= 1.2.0.2 - -kitcomponent: - basename=teal-isnm_mgtnode - description=teal for isnm - version=1.2.0.1 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.1 - -kitcomponent: - basename=teal-ll_mgtnode - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-isnm >= 1.2.0.0 - -kitcomponent: - basename=teal-pnsd_mgtnode - description=teal for pnsd - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-pnsd >= 1.2.0.0 - -kitcomponent: - basename=teal-sfp_mgtnode - description=teal for sfp - version=1.2.0.0 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-sfp >= 1.2.0.0 - -kitcomponent: - basename=teal-test_mgtnode - description=teal test - version=1.2.0.2 - release=1 - serverroles=mgtnode - kitrepoid=sles11_ppc64 - kitpkgdeps=teal-test >= 1.2.0.2 - -# kitpackage: This section defines one Kit Package, and how to build it. -# There can be zero or more kitpackage sections. -# All filenames should be relative paths to -# /source_packages -# If you want to build a package which can run on multiple OSes, -# you have two options: -# 1. Build a separate package for each OS you want to support. -# For this option, you need to define one kitpackage section -# per supported OS. -# 2. Build one package that can run on multiple OSes. -# If you are building an RPM package, you are responsible for -# creating an RPM spec file that can run on multiple OSes. -# For this option, you need to define one kitpackage section -# which contains multiple kitrepoid lines. -# -# kitpackage attributes: -# filename (mandatory) Package filename -# kitrepoid (mandatory) The repo(s) this package belongs to. -# If multiple repos are defined, the package will be built for -# the first repo only. For the other repos, a symlink is created -# to the package built for the first repo. -# Package build methods (optional) -# Define how to build the packages. -# If you don't specify a build method, the default behavior is -# to assume the package is pre-built under -# /source_packages -# All files in this section are relative to -# /source_packages -# There are four methods to build packages. -# 1. Use pre-built RPM package -# isexternalpkg: 'no'|'0', 'yes'|'1' (default: 'no') -# Indicates whether the RPM package will be added to the -# the kit tar file now as part of the kit build process, -# or whether the customer will need to separately -# obtain the RPM pacakage and add it to the kit tar file -# using 'buildkit addpkgs' -# rpm_prebuiltdir: If isexternalpkg=no, path to directory -# containing pre-built RPM package -# 2. Build RPM from spec + src dir -# rpm_spec: Path to spec file. -# rpm_srcdir: Path to source directory. -# 3. Build RPM from spec + src tarball -# rpm_spec: Path to spec file. -# rpm_srctarball: Path to source tarball. -# 4. Build RPM from source RPM -# rpm_srpm: Path to source RPM package. -kitpackage: - filename=teal-base-1.2.0.2-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= - -kitpackage: - filename=teal-isnm-1.2.0.1-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= - -kitpackage: - filename=teal-ll-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= - -kitpackage: - filename=teal-pnsd-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= - -kitpackage: - filename=teal-sfp-1.2.0.0-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= - -kitpackage: - filename=teal-test-1.2.0.2-1.ppc64.rpm - kitrepoid=rhels6_ppc64,sles11_ppc64 - # Method 1: Use pre-built RPM package - isexternalpkg=no - rpm_prebuiltdir= diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/imageprofile.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/imageprofile.pm deleted file mode 100644 index f42b70e7f..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/imageprofile.pm +++ /dev/null @@ -1,175 +0,0 @@ -package xCAT_plugin::<<>>_imageprofile; - -use strict; -use warnings; - -require xCAT::Utils; -require xCAT::Table; -require xCAT::KitPluginUtils; - - -# buildkit Processing -# In order to avoid collisions with other plugins, the package -# name for this plugin must contain the full kit name. -# The buildkit buildtar command will copy this file from your plugins -# directory to the the kit build directory, renaming the file with the -# correct kit name. All strings in this file of the form -# <<>> -# will be replaced with the full kit name. In order for buildkit to -# correctly edit this file, do not remove these strings. - - -# Global Variables - -# This is the full name of the kit which this plugin belongs -# to. The kit name is used by some code in process_request() -# to determine if the plugin should run. When you are testing -# your plugin the kit name should be set to "TESTMODE" to -# bypass the plugin check in process_request(). - -our ($PLUGIN_KITNAME); -#$PLUGIN_KITNAME = "TESTMODE"; -$PLUGIN_KITNAME = "<<>>"; - - -#------------------------------------------------------- - -=head1 - - Image Profile Kit Plugin - This plugin contains commands to run custom actions - during image profile operations. - -=cut - -#------------------------------------------------------- - - -#------------------------------------------------------- - -=head3 handled_commands - - Return list of kit plugin commands handled by this plugin - -=cut - -#------------------------------------------------------- - -sub handled_commands { - return { - kitimagevalidatecomps => '<<>>_imageprofile', - kitimageimport => '<<>>_imageprofile', - }; -} - - -#------------------------------------------------------- - -=head3 process_request - - Process the kit plugin command. - -=cut - -#------------------------------------------------------- - -sub process_request { - my $request = shift; - my $callback = shift; - - # This kit plugin is passed the name of an image profile. - # We need to determine which kits is used by this - # image profile to decide if this plugin should run or not. - - my $imgprofilename = $request->{arg}->[0]; - - my $kitdata = $request->{kitdata}; - if (! defined($kitdata)) { - $kitdata = xCAT::KitPluginUtils->get_kits_used_by_image_profiles([$imgprofilename]); - $request->{kitdata} = $kitdata; - } - - if ($PLUGIN_KITNAME ne "TESTMODE" && ! exists($kitdata->{$PLUGIN_KITNAME})) { - return; - } - - # Name of command and node list - my $command = $request->{command}->[0]; - my $args = $request->{arg}; - - if($command eq 'kitimagevalidatecomps') { - kitimagevalidatecomps($callback, $args); - } - elsif ($command eq 'kitimageimport') { - kitimageimport($callback, $args); - - } else { - my $rsp; - $rsp->{data}->[0] = "Command is not supported"; - xCAT::MsgUtils->message("E", $rsp, $callback); - } -} - - -#------------------------------------------------------- - -=head3 kitimagevalidatecomps - - This command is called to validate new changes to an - image profile's kit component list before the changes - are committed. - -=cut - -#------------------------------------------------------- - -sub kitimagevalidatecomps { - my $callback = shift; - my $args = shift; - my $rsp; - - # Parameters - my $imgprofilename = $args->[0]; - my $newcomplist = $args->[1]; - my @newcomplist = (); - if (defined($newcomplist)) { - @newcomplist = split(/,/, $newcomplist); - } - my $newosdistro = $args->[2]; - my $newosdistroupdate = $args->[3]; - - $rsp->{data}->[0] = "Running kitimagevalidatecomps"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitimageimport - - This command is called after changes to an image profile - have been committed. - -=cut - -#------------------------------------------------------- - -sub kitimageimport { - my $callback = shift; - my $args = shift; - my $rsp; - - # Parameters - my $imgprofilename = $args->[0]; - - $rsp->{data}->[0] = "Running kitimageimport"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/nodemgmt.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/nodemgmt.pm deleted file mode 100644 index 1eb766eb7..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-ppc64/plugins/sample/nodemgmt.pm +++ /dev/null @@ -1,251 +0,0 @@ -package xCAT_plugin::<<>>_nodemgmt; - -use strict; -use warnings; - -require xCAT::Utils; -require xCAT::Table; -require xCAT::KitPluginUtils; - -# buildkit Processing -# In order to avoid collisions with other plugins, the package -# name for this plugin must contain the full kit name. -# The buildkit buildtar command will copy this file from your plugins -# directory to the the kit build directory, renaming the file with the -# correct kit name. All strings in this file of the form -# <<>> -# will be replaced with the full kit name. In order for buildkit to -# correctly edit this file, do not remove these strings. - -# Global Variables - -# This is the full name of the kit which this plugin belongs -# to. The kit name is used by some code in process_request() -# to determine if the plugin should run. When you are testing -# your plugin the kit name should be set to "TESTMODE" to -# bypass the plugin check in process_request(). - -our ($PLUGIN_KITNAME); -#$PLUGIN_KITNAME = "TESTMODE"; -$PLUGIN_KITNAME = "<<>>"; - - -#------------------------------------------------------- - -=head1 - - Node Management Kit Plugin - This plugin contains commands to run custom actions - during node management operations. - -=cut - -#------------------------------------------------------- - - -#------------------------------------------------------- - -=head3 handled_commands - - Return list of kit plugin commands handled by this plugin - -=cut - -#------------------------------------------------------- - -sub handled_commands { - return { - kitnodeadd => '<<>>_nodemgmt', - kitnoderemove => '<<>>_nodemgmt', - kitnodeupdate => '<<>>_nodemgmt', - kitnoderefresh => '<<>>_nodemgmt', - kitnodefinished => '<<>>_nodemgmt', - }; -} - - -#------------------------------------------------------- - -=head3 process_request - - Process the kit plugin command. - -=cut - -#------------------------------------------------------- - -sub process_request { - my $request = shift; - my $callback = shift; - - # Name of command and node list - my $command = $request->{command}->[0]; - my $nodes = $request->{node}; - - # This kit plugin is passed a list of node names. - # We need to determine which kits are used by these - # nodes to decide if this plugin should run or not. - - my $kitdata = $request->{kitdata}; - if (! defined($kitdata)) { - $kitdata = xCAT::KitPluginUtils->get_kits_used_by_nodes($nodes); - $request->{kitdata} = $kitdata; - } - - if ($PLUGIN_KITNAME ne "TESTMODE" && ! exists($kitdata->{$PLUGIN_KITNAME})) { - return; - } - - # Get the nodes using this plugin's kit - $nodes = $kitdata->{$PLUGIN_KITNAME}; - - - if($command eq 'kitnodeadd') { - kitnodeadd($callback, $nodes); - } - elsif ($command eq 'kitnoderemove') { - kitnoderemove($callback, $nodes); - } - elsif ($command eq 'kitnodeupdate') { - kitnodeupdate($callback, $nodes); - } - elsif ($command eq 'kitnoderefresh') { - kitnoderefresh($callback, $nodes); - } - elsif ($command eq 'kitnodefinished') { - kitnodefinished($callback); - - } else { - my $rsp; - $rsp->{data}->[0] = "Command is not supported"; - xCAT::MsgUtils->message("E", $rsp, $callback); - } -} - - -#------------------------------------------------------- - -=head3 kitnodeadd - - This command is called when one or more nodes are added - to the cluster. - -=cut - -#------------------------------------------------------- - -sub kitnodeadd { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnodeadd"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnoderemove - - This command is called when one or more nodes are - removed from the cluster. - -=cut - -#------------------------------------------------------- - -sub kitnoderemove { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnoderemove"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnodeupdate - - This command is called when the configuration of one - or more nodes are updated. - -=cut - -#------------------------------------------------------- - -sub kitnodeupdate { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnodeupdate"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnoderefresh - - This command is called when node-related configuration - files are updated. - -=cut - -#------------------------------------------------------- - -sub kitnoderefresh { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnoderefresh"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnodefinished - - This command is called at the end of a node management - operation. - -=cut - -#------------------------------------------------------- - -sub kitnodefinished { - my $callback = shift; - my $rsp; - - $rsp->{data}->[0] = "Running kitnodefinished"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/imageprofile.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/imageprofile.pm deleted file mode 100644 index f42b70e7f..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/imageprofile.pm +++ /dev/null @@ -1,175 +0,0 @@ -package xCAT_plugin::<<>>_imageprofile; - -use strict; -use warnings; - -require xCAT::Utils; -require xCAT::Table; -require xCAT::KitPluginUtils; - - -# buildkit Processing -# In order to avoid collisions with other plugins, the package -# name for this plugin must contain the full kit name. -# The buildkit buildtar command will copy this file from your plugins -# directory to the the kit build directory, renaming the file with the -# correct kit name. All strings in this file of the form -# <<>> -# will be replaced with the full kit name. In order for buildkit to -# correctly edit this file, do not remove these strings. - - -# Global Variables - -# This is the full name of the kit which this plugin belongs -# to. The kit name is used by some code in process_request() -# to determine if the plugin should run. When you are testing -# your plugin the kit name should be set to "TESTMODE" to -# bypass the plugin check in process_request(). - -our ($PLUGIN_KITNAME); -#$PLUGIN_KITNAME = "TESTMODE"; -$PLUGIN_KITNAME = "<<>>"; - - -#------------------------------------------------------- - -=head1 - - Image Profile Kit Plugin - This plugin contains commands to run custom actions - during image profile operations. - -=cut - -#------------------------------------------------------- - - -#------------------------------------------------------- - -=head3 handled_commands - - Return list of kit plugin commands handled by this plugin - -=cut - -#------------------------------------------------------- - -sub handled_commands { - return { - kitimagevalidatecomps => '<<>>_imageprofile', - kitimageimport => '<<>>_imageprofile', - }; -} - - -#------------------------------------------------------- - -=head3 process_request - - Process the kit plugin command. - -=cut - -#------------------------------------------------------- - -sub process_request { - my $request = shift; - my $callback = shift; - - # This kit plugin is passed the name of an image profile. - # We need to determine which kits is used by this - # image profile to decide if this plugin should run or not. - - my $imgprofilename = $request->{arg}->[0]; - - my $kitdata = $request->{kitdata}; - if (! defined($kitdata)) { - $kitdata = xCAT::KitPluginUtils->get_kits_used_by_image_profiles([$imgprofilename]); - $request->{kitdata} = $kitdata; - } - - if ($PLUGIN_KITNAME ne "TESTMODE" && ! exists($kitdata->{$PLUGIN_KITNAME})) { - return; - } - - # Name of command and node list - my $command = $request->{command}->[0]; - my $args = $request->{arg}; - - if($command eq 'kitimagevalidatecomps') { - kitimagevalidatecomps($callback, $args); - } - elsif ($command eq 'kitimageimport') { - kitimageimport($callback, $args); - - } else { - my $rsp; - $rsp->{data}->[0] = "Command is not supported"; - xCAT::MsgUtils->message("E", $rsp, $callback); - } -} - - -#------------------------------------------------------- - -=head3 kitimagevalidatecomps - - This command is called to validate new changes to an - image profile's kit component list before the changes - are committed. - -=cut - -#------------------------------------------------------- - -sub kitimagevalidatecomps { - my $callback = shift; - my $args = shift; - my $rsp; - - # Parameters - my $imgprofilename = $args->[0]; - my $newcomplist = $args->[1]; - my @newcomplist = (); - if (defined($newcomplist)) { - @newcomplist = split(/,/, $newcomplist); - } - my $newosdistro = $args->[2]; - my $newosdistroupdate = $args->[3]; - - $rsp->{data}->[0] = "Running kitimagevalidatecomps"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitimageimport - - This command is called after changes to an image profile - have been committed. - -=cut - -#------------------------------------------------------- - -sub kitimageimport { - my $callback = shift; - my $args = shift; - my $rsp; - - # Parameters - my $imgprofilename = $args->[0]; - - $rsp->{data}->[0] = "Running kitimageimport"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - diff --git a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/nodemgmt.pm b/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/nodemgmt.pm deleted file mode 100644 index 1eb766eb7..000000000 --- a/xCAT-buildkit/share/xcat/kits/kit_build/teal/teal-x86_64/plugins/sample/nodemgmt.pm +++ /dev/null @@ -1,251 +0,0 @@ -package xCAT_plugin::<<>>_nodemgmt; - -use strict; -use warnings; - -require xCAT::Utils; -require xCAT::Table; -require xCAT::KitPluginUtils; - -# buildkit Processing -# In order to avoid collisions with other plugins, the package -# name for this plugin must contain the full kit name. -# The buildkit buildtar command will copy this file from your plugins -# directory to the the kit build directory, renaming the file with the -# correct kit name. All strings in this file of the form -# <<>> -# will be replaced with the full kit name. In order for buildkit to -# correctly edit this file, do not remove these strings. - -# Global Variables - -# This is the full name of the kit which this plugin belongs -# to. The kit name is used by some code in process_request() -# to determine if the plugin should run. When you are testing -# your plugin the kit name should be set to "TESTMODE" to -# bypass the plugin check in process_request(). - -our ($PLUGIN_KITNAME); -#$PLUGIN_KITNAME = "TESTMODE"; -$PLUGIN_KITNAME = "<<>>"; - - -#------------------------------------------------------- - -=head1 - - Node Management Kit Plugin - This plugin contains commands to run custom actions - during node management operations. - -=cut - -#------------------------------------------------------- - - -#------------------------------------------------------- - -=head3 handled_commands - - Return list of kit plugin commands handled by this plugin - -=cut - -#------------------------------------------------------- - -sub handled_commands { - return { - kitnodeadd => '<<>>_nodemgmt', - kitnoderemove => '<<>>_nodemgmt', - kitnodeupdate => '<<>>_nodemgmt', - kitnoderefresh => '<<>>_nodemgmt', - kitnodefinished => '<<>>_nodemgmt', - }; -} - - -#------------------------------------------------------- - -=head3 process_request - - Process the kit plugin command. - -=cut - -#------------------------------------------------------- - -sub process_request { - my $request = shift; - my $callback = shift; - - # Name of command and node list - my $command = $request->{command}->[0]; - my $nodes = $request->{node}; - - # This kit plugin is passed a list of node names. - # We need to determine which kits are used by these - # nodes to decide if this plugin should run or not. - - my $kitdata = $request->{kitdata}; - if (! defined($kitdata)) { - $kitdata = xCAT::KitPluginUtils->get_kits_used_by_nodes($nodes); - $request->{kitdata} = $kitdata; - } - - if ($PLUGIN_KITNAME ne "TESTMODE" && ! exists($kitdata->{$PLUGIN_KITNAME})) { - return; - } - - # Get the nodes using this plugin's kit - $nodes = $kitdata->{$PLUGIN_KITNAME}; - - - if($command eq 'kitnodeadd') { - kitnodeadd($callback, $nodes); - } - elsif ($command eq 'kitnoderemove') { - kitnoderemove($callback, $nodes); - } - elsif ($command eq 'kitnodeupdate') { - kitnodeupdate($callback, $nodes); - } - elsif ($command eq 'kitnoderefresh') { - kitnoderefresh($callback, $nodes); - } - elsif ($command eq 'kitnodefinished') { - kitnodefinished($callback); - - } else { - my $rsp; - $rsp->{data}->[0] = "Command is not supported"; - xCAT::MsgUtils->message("E", $rsp, $callback); - } -} - - -#------------------------------------------------------- - -=head3 kitnodeadd - - This command is called when one or more nodes are added - to the cluster. - -=cut - -#------------------------------------------------------- - -sub kitnodeadd { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnodeadd"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnoderemove - - This command is called when one or more nodes are - removed from the cluster. - -=cut - -#------------------------------------------------------- - -sub kitnoderemove { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnoderemove"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnodeupdate - - This command is called when the configuration of one - or more nodes are updated. - -=cut - -#------------------------------------------------------- - -sub kitnodeupdate { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnodeupdate"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnoderefresh - - This command is called when node-related configuration - files are updated. - -=cut - -#------------------------------------------------------- - -sub kitnoderefresh { - my $callback = shift; - my $rsp; - - # Parameters - my $nodes = shift; - - $rsp->{data}->[0] = "Running kitnoderefresh"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} - - -#------------------------------------------------------- - -=head3 kitnodefinished - - This command is called at the end of a node management - operation. - -=cut - -#------------------------------------------------------- - -sub kitnodefinished { - my $callback = shift; - my $rsp; - - $rsp->{data}->[0] = "Running kitnodefinished"; - xCAT::MsgUtils->message("I", $rsp, $callback); - - # TODO - # ... ADD YOUR CODE HERE -} -