From 92abb1e766a98411962ecbe2b33ffee9640a1e88 Mon Sep 17 00:00:00 2001
From: daniceexi <daniceexi@8638fb3e-16cb-4fca-ae20-7b5d299a9bcd>
Date: Sun, 5 Feb 2012 07:15:05 +0000
Subject: [PATCH] update the manpage to support NGP

git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@11477 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
---
 xCAT-client/pods/man1/rscan.1.pod     | 30 +++++++++++++++++++++++++++
 xCAT-client/pods/man1/rspconfig.1.pod | 20 +++++++++++++++++-
 2 files changed, 49 insertions(+), 1 deletion(-)

diff --git a/xCAT-client/pods/man1/rscan.1.pod b/xCAT-client/pods/man1/rscan.1.pod
index 9bff19ffa..52a05893f 100644
--- a/xCAT-client/pods/man1/rscan.1.pod
+++ b/xCAT-client/pods/man1/rscan.1.pod
@@ -15,6 +15,8 @@ I<rscan [-V|--verbose] noderange [-u][-w][-x|-z]>
 
 The rscan command lists hardware information for each node managed by the hardware control points specified in noderange.
 
+For the management module of blade, if the blade server is a NGP power blade, the fsp belongs to the blade server also will be scanned.
+
 Note: The first line of the output always contains information about the hardware control point. When using the rscan command to generate output for HMC or IVM hardware control points, it provides the FSPs and BPAs as part of the output. The only exception is the rscan -u flag which provides updates made hardware control point in the xCAT database. 
 
 =head1 OPTIONS
@@ -29,6 +31,10 @@ B<-V>          Verbose output.
 
 B<-u>          Updates and then prints out node definitions in the xCAT database for CEC/BPA. It updates the existing nodes that contain the same mtms and serial number for nodes managed by the specified hardware control point. This primarily works with CEC/FSP and frame/BPA nodes when the node name is not the same as the managed system name on hardware control point (HMC), This flag will update the BPA/FSP node name definitions to be listed as the managed system name in the xCAT database.  
 
+For the NGP blade server, both the blade server and fsp object of xCAT will be updated if the mpa and slot id are matched to the object which has been defined in the xCAT database.
+
+Note: only the matched object will be updated.
+
 B<-w>          Writes output to xCAT database.
 
 B<-x>          XML format.
@@ -195,6 +201,30 @@ Output is similar to:
     groups=all
     mgt=zvm
 
+6. To scan the NGP blade center:
+
+I<rscan cmm01>
+
+Output is similar to:
+
+  type    name                  id      type-model  serial-number  address
+  cmm     AMM680520153          0       789392X     100048A        cmm01
+  fsp     SN#YL10JH184067-fsp1  1       789542X     10F752A        12.0.0.9
+  blade   SN#YL10JH184067       1       789542X     10F752A
+  fsp     SN#YL10JH184079-fsp1  3       789542X     10F697A        12.0.0.11
+  blade   SN#YL10JH184079       3       789542X     10F697A
+
+7. To update the NGP blade server:
+
+I<rscan cmm01 -u>
+
+Output is similar to:
+
+  cmm    [AMM680520153]         Matched To =>[cmm01]
+  fsp    [SN#YL10JH184067-fsp1] Matched To =>[cmm01node01-fsp]
+  blade  [SN#YL10JH184067]      Matched To =>[cmm01node01]
+  fsp    [SN#YL10JH184079-fsp1] Matched To =>[cmm01node03-fsp]
+  blade  [SN#YL10JH184079]      Matched To =>[cmm01node03]
 
 =head1 FILES
 
diff --git a/xCAT-client/pods/man1/rspconfig.1.pod b/xCAT-client/pods/man1/rspconfig.1.pod
index 619652f32..bf8f863b1 100644
--- a/xCAT-client/pods/man1/rspconfig.1.pod
+++ b/xCAT-client/pods/man1/rspconfig.1.pod
@@ -30,12 +30,16 @@ B<rspconfig> I<noderange> B<sshcfg>={B<enable>|B<disable>}
 
 B<rspconfig> I<noderange> B<snmpcfg>={B<enable>|B<disable>}
 
+B<rspconfig> I<noderange> B<solcfg>={B<enable>|B<disable>}
+
 B<rspconfig> I<noderange> B<pd1>={B<nonred>|B<redwoperf>|B<redwperf>}
 
 B<rspconfig> I<noderange> B<pd2>={B<nonred>|B<redwoperf>|B<redwperf>}
 
 B<rspconfig> I<noderange> B<network>={[B<ip>],[B<host>],[B<gateway>],[B<netmask>]|B<*>}
 
+B<rspconfig> I<noderange> B<initnetwork>={[B<ip>],[B<host>],[B<gateway>],[B<netmask>]|B<*>}
+
 B<rspconfig> I<noderange> B<textid>={B<*|textid>}
 
 B<rspconfig> I<singlenode> B<frame>={B<frame_number>}
@@ -88,6 +92,10 @@ B<rspconfig> I<noderange> B<hostname>={B<*|name>}
 
 B<rspconfig> I<noderange> B<--resetnet>
 
+=head2 FSP of NGP Blade Server Specific:
+
+B<rspconfig> I<noderange> B<network>={[ip],[host],[gateway],[netmask]│*}
+
 =head2 BPA/Frame Specific:
 
 B<rspconfig> I<noderange> {B<network>|B<dev>|B<celogin1>}
@@ -306,7 +314,13 @@ The subnet mask.
 
 =item B<network>={[I<ip>],[I<host>],[I<gateway>],[I<netmask>]|*}
 
-For MPA only. Get or set the MPA network parameters. If '*' is specified, all parameters are read from the xCAT database.
+For MPA:  get or set the MPA network parameters. If '*' is specified, all parameters are read from the xCAT database.
+
+For FSP of NGP blade server: set the network parameters. If '*' is specified, all parameters are read from the xCAT database.
+
+=item B<initnetwork>={[I<ip>],[I<host>],[I<gateway>],[I<netmask>]|*}
+
+For MPA only. Connecting to the IP of MPA from the hosts.otherinterfaces to set the MPA network parameters. If '*' is specified, all parameters are read from the xCAT database.
 
 =item B<network>={I<nic>,{[I<ip>],[I<host>],[I<gateway>],[I<netmask>]}|*}
 
@@ -359,6 +373,10 @@ Enable or disable SNMP on MPA.
 
 Get or set where the SNMP alerts should be sent to.
 
+=item B<solcfg>={I<enable>|I<disable>}
+
+Enable or disable the sol on MPA and blade servers belongs to it.
+
 =item B<spdump>
 
 Performs a service processor dump.