diff --git a/xCAT-client-2.0/share/man/man1/reventlog.1 b/xCAT-client-2.0/share/man/man1/reventlog.1
new file mode 100644
index 000000000..aa0f04d0c
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man1/reventlog.1
@@ -0,0 +1,130 @@
+.\" Process this file with
+.\" groff -man -Tascii reventlog.1
+.\"
+.TH REVENTLOG 1 "Jan 2008" xCAT "xCAT"
+.SH NAME
+reventlog \- retrieve or clear remote hardware event logs
+.SH SYNOPSIS
+.B reventlog
+[\fInoderange\fR] [\fInumber of entries\fR|\fIall\fR|\fIclear\fR]
+
+.B reventlog
+[\fI-h\fR|\fI--help\fR|\fI-v\fR|\fI--version\fR]
+.SH DESCRIPTION
+.B reventlog
+can display any number of remote hardware event log entries
+or clear them for a range of nodes.  See
+.BR noderange (3).
+Hardware event logs are stored on each servers service processor.
+.SH OPTIONS
+.IP \fIn\fR
+Retrieve \fIn\fR number of entries.
+
+.IP \fBall\fR
+Retrieve all entries.
+
+.IP \fBclear\fR
+Clear event logs.
+
+.IP \fB-h\fR|\fB--help\fR
+Print help.
+
+.IP \fB-v\fR|\fB--version\fR
+Print version.
+
+
+.SH DIAGNOSTICS
+The following diagnostics may be issued on stdout/stderr:
+
+is not a node or a group
+.RS
+Node or group is not defined in
+.BR nodelist.tab (5).
+.RE 
+
+function not supported
+.RS
+Node does not support remote event log retrieval or remote event log retrieval method not supported.
+.RE
+
+ping to $SPN failed
+.RS
+Where $SPN = the Service Processor Network defined in
+.BR mp.tab (5).
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+telnet timeout
+.RS
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+connection refused
+.RS
+Returned if telnet fails.  PCI MPA may be in use or telnet interface is locked up.  
+.BR mpareset (1)
+can be used to reboot the PCI MPA. 
+.RE
+
+unknown asma $host
+.RS
+Returned if not in /etc/hosts or DNS.
+.RE
+
+name lookup failure
+.RS
+Returned if not in DNS.
+.RE
+
+node not on asma $SPN
+.RS
+Where $SPN = the SPN defined for that node in in
+.BR mp.tab (5).  
+Use 
+.BR mpncheck (1)
+$SPN to verify.  Check cabling and try 
+.BR
+mpareset (1).
+.RE
+
+remote session timeout
+.RS
+Communication with SPN was successful but communication with node failed.  Check cabling.  Try removing power from node, wait 10 seconds, then restore.
+
+.SH EXAMPLES
+
+\fIreventlog node4,node5 5\fR
+
+node4: SERVPROC I 09/06/00 15:23:33 Remote Login Successful User ID = USERID[00]
+.br
+node4: SERVPROC I 09/06/00 15:23:32 System spn1 started a RS485 connection with us[00]
+.br
+node4: SERVPROC I 09/06/00 15:22:35 RS485 connection to system spn1 has ended[00]
+.br
+node4: SERVPROC I 09/06/00 15:22:32 Remote Login Successful User ID = USERID[00]
+.br
+node4: SERVPROC I 09/06/00 15:22:31 System spn1 started a RS485 connection with us[00]
+.br
+node5: SERVPROC I 09/06/00 15:22:32 Remote Login Successful User ID = USERID[00]
+.br
+node5: SERVPROC I 09/06/00 15:22:31 System spn1 started a RS485 connection with us[00]
+.br
+node5: SERVPROC I 09/06/00 15:21:34 RS485 connection to system spn1 has ended[00]
+.br
+node5: SERVPROC I 09/06/00 15:21:30 Remote Login Successful User ID = USERID[00]
+.br
+node5: SERVPROC I 09/06/00 15:21:29 System spn1 started a RS485 connection with us[00]
+.br
+
+\fIreventlog node4,node5 clear\fR
+
+node4: clear
+.br
+node5: clear
+.SH "FILES"
+.IX Header "FILES"
+/opt/xcat/bin/reventlog
+.SH "NOTES"
+.IX Header "NOTES"
+This command is part of the xCAT software product.
+
diff --git a/xCAT-client-2.0/share/man/man1/rinv.1 b/xCAT-client-2.0/share/man/man1/rinv.1
new file mode 100644
index 000000000..f7225b313
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man1/rinv.1
@@ -0,0 +1,148 @@
+.\" Process this file with
+.\" groff -man -Tascii rinv.1
+.\"
+.TH RINV 1 "Jan 2008" xCAT "xCAT"
+.SH NAME
+rinv \- remote hardware inventory
+.SH SYNOPSIS
+.B rinv
+[\fInoderange\fR] [\fIpci\fR|\fIconfig\fR|\fImodel\fR|\fIserial\fR|\fIasset\fR|\fIall\fR]
+
+.B rinv
+[\fI-h\fR|\fI--help\fR|\fI-v\fR|\fI--version\fR]
+.SH DESCRIPTION
+.B rinv
+retrieves hardware configuration information from the on-board Service Processor
+for a single or range of nodes and groups.
+.SH OPTIONS
+.IP \fBpci\fR
+Retrieves PCI bus information.
+
+.IP \fBconfig\fR
+Retrieves number of processors, speed, total memory, and DIMM locations.
+
+.IP \fBmodel\fR
+Retrieves model number.
+
+.IP \fBserial\fR
+Retrieves serial number.
+
+.IP \fBasset\fR
+Retrieves asset tag.  Usually it's the MAC address of eth0.
+
+.IP \fBall\fR
+All of the above.
+
+.IP \fB-h\fR|\fB--help\fR
+Print help.
+
+.IP \fB-v\fR|\fB--version\fR
+Print version.
+
+.SH DIAGNOSTICS
+The following diagnostics may be issued on stdout/stderr:
+
+is not a node or a group
+.RS
+Node or group is not defined in
+.BR nodelist.tab (5).
+.RE 
+
+function not supported
+.RS
+Node does not support remote power control or remote power control method not supported.
+.RE
+
+ping to $SPN failed
+.RS
+Where $SPN = the Service Processor Network defined in
+.BR mp.tab (5).
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+telnet timeout
+.RS
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+connection refused
+.RS
+Returned if telnet fails.  PCI MPA may be in use or telnet interface is locked up.  
+.BR mpareset (1)
+can be used to reboot the PCI MPA. 
+.RE
+
+unknown asma $host
+.RS
+Returned if not in /etc/hosts or DNS.
+.RE
+
+name lookup failure
+.RS
+Returned if not in DNS.
+.RE
+
+node not on asma $SPN
+.RS
+Where $SPN = the SPN defined for that node in in
+.BR mp.tab (5).  
+Use 
+.BR mpncheck (1)
+$SPN to verify.  Check cabling and try 
+.BR
+mpareset (1).
+.RE
+
+remote session timeout
+.RS
+Communication with SPN was successful but communication with node failed.  Check cabling.  Try removing power from node, wait 10 seconds, then restore.
+.SH EXAMPLES
+
+\fIrinv node5 all\fR
+
+node5: Machine Type/Model 865431Z
+.br
+node5: Serial Number 23C5030
+.br
+node5: Asset Tag 00:06:29:1F:01:1A
+.br
+node5: PCI Information
+.br
+node5: Bus  VendID   DevID   RevID   Description                    Slot  Pass/Fail 
+.br
+node5:  0    1166    0009     06     Host Bridge                      0     PASS 
+.br
+node5:  0    1166    0009     06     Host Bridge                      0     PASS 
+.br
+node5:  0    5333    8A22     04     VGA Compatible Controller        0     PASS 
+.br
+node5:  0    8086    1229     08     Ethernet Controller              0     PASS 
+.br
+node5:  0    8086    1229     08     Ethernet Controller              0     PASS 
+.br
+node5:  0    1166    0200     50     ISA Bridge                       0     PASS 
+.br
+node5:  0    1166    0211     00     IDE Controller                   0     PASS 
+.br
+node5:  0    1166    0220     04     Universal Serial Bus             0     PASS 
+.br
+node5:  1    9005    008F     02     SCSI Bus Controller              0     PASS 
+.br
+node5:  1    14C1    8043     03     Unknown Device Type              2     PASS 
+.br
+node5: Machine Configuration Info
+.br
+node5: Number of Processors:   2
+.br
+node5: Processor Speed: 866 MHz
+.br
+node5: Total Memory:   512 MB
+.br
+node5: Memory DIMM locations:  Slot(s)  3  4 
+.br
+.SH "FILES"
+.IX Header "FILES"
+/opt/xcat/bin/rinv
+.SH "NOTES"
+.IX Header "NOTES"
+This command is part of the xCAT software product.
diff --git a/xCAT-client-2.0/share/man/man1/rnetboot.1 b/xCAT-client-2.0/share/man/man1/rnetboot.1
new file mode 100644
index 000000000..054327469
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man1/rnetboot.1
@@ -0,0 +1,165 @@
+.\" Automatically generated by Pod::Man version 1.02
+.\" Tue Jan  8 10:33:42 2008
+.\"
+.\" Standard preamble:
+.\" ======================================================================
+.de Sh \" Subsection heading
+.br
+.if t .Sp
+.ne 5
+.PP
+\fB\\$1\fR
+.PP
+..
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Ip \" List item
+.br
+.ie \\n(.$>=3 .ne \\$3
+.el .ne 3
+.IP "\\$1" \\$2
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  | will give a
+.\" real vertical bar.  \*(C+ will give a nicer C++.  Capital omega is used
+.\" to do unbreakable dashes and therefore won't be available.  \*(C` and
+.\" \*(C' expand to `' in nroff, nothing in troff, for use with C<>
+.tr \(*W-|\(bv\*(Tr
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` `
+.    ds C' '
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+'br\}
+.\"
+.\" If the F register is turned on, we'll generate index entries on stderr
+.\" for titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and
+.\" index entries marked with X<> in POD.  Of course, you'll have to process
+.\" the output yourself in some meaningful fashion.
+.if \nF \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+.    .
+.    nr % 0
+.    rr F
+.\}
+.\"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it
+.\" makes way too many mistakes in technical documents.
+.hy 0
+.if n .na
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.bd B 3
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ======================================================================
+.\"
+.IX Title "RNETBOOT.1 1"
+.TH RNETBOOT.1 1 "perl v5.6.0" "2008-01-08" "User Contributed Perl Documentation"
+.UC
+.SH "NAME"
+\&\fBrnetboot\fR \-Will force an unattended network install for a range of nodes (diskless) Front end to nodeset noderange netboot; rpower noderange boot.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+\&\fBrnetboot\fR
+\&\fInoderange\fR
+.PP
+\&\fBrnetboot\fR
+[\fB\-h\fR|\fB\*(--help\fR]
+.PP
+\&\fBrnetboot\fR
+[\fB\-v\fR|\fB\*(--version\fR]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fBrnetboot\fRWill force an unattended network install for a range of nodes (diskless) Front end to nodeset noderange netboot; rpower noderange boot.  
+.SH "EXAMPLES"
+.IX Header "EXAMPLES"
+.Vb 4
+\&  rnetboot 1,3
+\&  rnetboot 14-56,70-203
+\&  rnetboot 1,3,14-56,70-203
+\&  rnetboot all,-129-256
+.Ve
diff --git a/xCAT-client-2.0/share/man/man1/rpower.1 b/xCAT-client-2.0/share/man/man1/rpower.1
new file mode 100644
index 000000000..4ef566d95
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man1/rpower.1
@@ -0,0 +1,208 @@
+.\" Automatically generated by Pod::Man version 1.02
+.\" Tue Jan  8 10:48:25 2008
+.\"
+.\" Standard preamble:
+.\" ======================================================================
+.de Sh \" Subsection heading
+.br
+.if t .Sp
+.ne 5
+.PP
+\fB\\$1\fR
+.PP
+..
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Ip \" List item
+.br
+.ie \\n(.$>=3 .ne \\$3
+.el .ne 3
+.IP "\\$1" \\$2
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  | will give a
+.\" real vertical bar.  \*(C+ will give a nicer C++.  Capital omega is used
+.\" to do unbreakable dashes and therefore won't be available.  \*(C` and
+.\" \*(C' expand to `' in nroff, nothing in troff, for use with C<>
+.tr \(*W-|\(bv\*(Tr
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` `
+.    ds C' '
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+'br\}
+.\"
+.\" If the F register is turned on, we'll generate index entries on stderr
+.\" for titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and
+.\" index entries marked with X<> in POD.  Of course, you'll have to process
+.\" the output yourself in some meaningful fashion.
+.if \nF \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+.    .
+.    nr % 0
+.    rr F
+.\}
+.\"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it
+.\" makes way too many mistakes in technical documents.
+.hy 0
+.if n .na
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.bd B 3
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ======================================================================
+.\"
+.IX Title "RPOWER.1 1"
+.TH RPOWER.1 1 "perl v5.6.0" "2008-01-08" "User Contributed Perl Documentation"
+.UC
+.SH "NAME"
+rpower \- remote power control
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+\&\fBrpower\fR
+\&\fInoderange\fR
+\&\fBon\fR|\fBoff\fR|\fBstat\fR|\fBstate\fR|\fBreset\fR|\fBboot\fR|\fBcycle\fR
+.PP
+\&\fBrpower\fR
+[\fB\-h\fR|\fB\*(--help\fR]
+.PP
+\&\fBrpower\fR
+[\fB\-v\fR|\fB\*(--version\fR]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+\&\fIrpower\fR controls the power for a single or range of nodes.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+.Ip "\fBon\fR" 4
+.IX Item "on"
+Turn power on.
+.Ip "\fBoff\fR" 4
+.IX Item "off"
+Turn power off.
+.Ip "\fBstat\fR|\fBstate\fR" 4
+.IX Item "stat|state"
+Print the current power state/status.
+.Ip "\fBreset\fR" 4
+.IX Item "reset"
+Send a hard reset.
+.Ip "\fBboot\fR" 4
+.IX Item "boot"
+If off, then power on.
+If on, then hard reset.
+The option is recommended over \fBcycle\fR.
+.Ip "\fBcycle\fR" 4
+.IX Item "cycle"
+Power off, then on.
+.Ip "\fB\-h\fR, \fB\*(--help\fR" 4
+.IX Item "-h, help"
+Help.
+Prints out a brief help message.
+.Ip "\fB\-v\fR, \fB\*(--version\fR" 4
+.IX Item "-v, version"
+Version.
+Display the version number.
+.SH "ENVIRONMENT"
+.IX Header "ENVIRONMENT"
+.SH "EXAMPLES"
+.IX Header "EXAMPLES"
+\fIrpower node4,node5 stat\fR
+
+node4: on
+.br
+node5: off
+
+\fIrpower node5 on\fR
+
+node5: on
+
+.SH "FILES"
+.IX Header "FILES"
+/opt/xcat/bin/rpower
+.SH "NOTES"
+.IX Header "NOTES"
+This command is part of the xCAT software product.
diff --git a/xCAT-client-2.0/share/man/man1/rvitals.1 b/xCAT-client-2.0/share/man/man1/rvitals.1
new file mode 100644
index 000000000..2f3654c58
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man1/rvitals.1
@@ -0,0 +1,169 @@
+.\" Process this file with
+.\" groff -man -Tascii rvitals.1
+.\"
+.TH RVITALS 1 "Jan 2008" xCAT "xCAT"
+.SH NAME
+rvitals \- remote hardware vitals
+.SH SYNOPSIS
+.B rvitals
+[\fInoderange\fR] [\fIcputemp\fR|\fIdisktemp\fR|\fIambtemp\fR|\fItemp\fR]
+
+.B rvitals
+[\fInoderange\fR] [\fIvoltage\fR|\fIfanspeed\fR|\fIpower\fR|\fIpowertime\fR]
+
+.B rvitals
+[\fInoderange\fR] [\fIreboots\fR|\fIstate\fR|\fIall\fR]
+
+.B rvitals
+[\fI-h\fR|\fI--help\fR|\fI-v\fR|\fI--version\fR]
+.SH DESCRIPTION
+.B rvitals
+retrieves hardware vital information from the on-board Service Processor
+for a single or range of nodes and groups.
+.SH OPTIONS
+.IP \fBcputemp\fR
+Retrieves CPU temperatures.
+
+.IP \fBdisktemp\fR
+Retrieves HD back plane temperatures.
+
+.IP \fBambtemp\fR
+Retrieves ambient temperatures.
+
+.IP \fBtemp\fR
+Retrieves all temperatures.
+
+.IP \fBvoltage\fR
+Retrieves power supply and VRM voltage readings.
+
+.IP \fBfanspeed\fR
+Retrieves fan speeds.
+
+.IP \fBpower\fR
+Retrieves power status.
+
+.IP \fBpowertime\fR
+Retrieves total power uptime.  This value only increases, unless the
+Service Processor flash gets updated.
+
+.IP \fBreboot\fR
+Retrieves total number of reboots.  This value only increases, unless the
+Service Processor flash gets updated.
+
+.IP \fBstate\fR
+Retrieves the system state.
+
+.IP \fBall\fR
+All of the above.
+
+.IP \fB-h\fR|\fB--help\fR
+Print help.
+
+.IP \fB-v\fR|\fB--version\fR
+Print version.
+
+.SH DIAGNOSTICS
+The following diagnostics may be issued on stdout/stderr:
+
+is not a node or a group
+.RS
+Node or group is not defined in
+.BR nodelist.tab (5).
+.RE 
+
+function not supported
+.RS
+Node does not support remote power control or remote power control method not supported.
+.RE
+
+ping to $SPN failed
+.RS
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+telnet timeout
+.RS
+PCI MPA adapter may not have power.  Check Ethernet cable and IP.
+.RE
+
+connection refused
+.RS
+Returned if telnet fails.  PCI MPA may be in use or telnet interface is locked up.  
+.BR mpareset (1)
+can be used to reboot the PCI MPA. 
+.RE
+
+unknown asma $host
+.RS
+Returned if not in /etc/hosts or DNS.
+.RE
+
+name lookup failure
+.RS
+Returned if not in DNS.
+.RE
+
+node not on asma $SPN
+.RS
+Where $SPN = the SPN defined for that node in in
+.BR mp.tab (5).  
+Use 
+.BR mpncheck (1)
+$SPN to verify.  Check cabling and try 
+.BR
+mpareset (1).
+.RE
+
+remote session timeout
+.RS
+Communication with SPN was successful but communication with node failed.  Check cabling.  Try removing power from node, wait 10 seconds, then restore.
+.SH EXAMPLES
+
+\fIrvitals node5 all\fR
+
+node5: CPU 1 Temperature: + 29.00 C (+ 84.2 F)
+.br
+node5: CPU 2 Temperature: + 19.00 C (+ 66.2 F)
+.br
+node5: DASD Sensor 1 Temperature: + 32.00 C (+ 89.6 F)
+.br
+node5: System Ambient Temperature Temperature: + 26.00 C (+ 78.8 F)
+.br
+node5: +5V Voltage: +  5.01V
+.br
+node5: +3V Voltage: +  3.29V
+.br
+node5: +12V Voltage: + 11.98V
+.br
+node5: +2.5V Voltage: +  2.52V
+.br
+node5: VRM1 Voltage: +  1.61V
+.br
+node5: VRM2 Voltage: +  1.61V
+.br
+node5: Fan 1 Percent of max:    100%
+.br
+node5: Fan 2 Percent of max:    100%
+.br
+node5: Fan 3 Percent of max:    100%
+.br
+node5: Fan 4 Percent of max:    100%
+.br
+node5: Fan 5 Percent of max:    100%
+.br
+node5: Fan 6 Percent of max:    100%
+.br
+node5: Current Power Status On
+.br
+node5: Power On Seconds   11855915
+.br
+node5: Number of Reboots    930
+.br
+node5: System State Booting OS or in unsupported OS
+.br
+.SH "FILES"
+.IX Header "FILES"
+/opt/xcat/bin/rvitals
+.SH "NOTES"
+.IX Header "NOTES"
+This command is part of the xCAT software product.
diff --git a/xCAT-client-2.0/share/man/man8/getmacs.8 b/xCAT-client-2.0/share/man/man8/getmacs.8
new file mode 100644
index 000000000..6903d15e0
--- /dev/null
+++ b/xCAT-client-2.0/share/man/man8/getmacs.8
@@ -0,0 +1,165 @@
+.\" Automatically generated by Pod::Man version 1.02
+.\" Tue Jan  8 10:43:59 2008
+.\"
+.\" Standard preamble:
+.\" ======================================================================
+.de Sh \" Subsection heading
+.br
+.if t .Sp
+.ne 5
+.PP
+\fB\\$1\fR
+.PP
+..
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Ip \" List item
+.br
+.ie \\n(.$>=3 .ne \\$3
+.el .ne 3
+.IP "\\$1" \\$2
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+
+.fi
+..
+.\" Set up some character translations and predefined strings.  \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote.  | will give a
+.\" real vertical bar.  \*(C+ will give a nicer C++.  Capital omega is used
+.\" to do unbreakable dashes and therefore won't be available.  \*(C` and
+.\" \*(C' expand to `' in nroff, nothing in troff, for use with C<>
+.tr \(*W-|\(bv\*(Tr
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+.    ds -- \(*W-
+.    ds PI pi
+.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
+.    ds L" ""
+.    ds R" ""
+.    ds C` `
+.    ds C' '
+'br\}
+.el\{\
+.    ds -- \|\(em\|
+.    ds PI \(*p
+.    ds L" ``
+.    ds R" ''
+'br\}
+.\"
+.\" If the F register is turned on, we'll generate index entries on stderr
+.\" for titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and
+.\" index entries marked with X<> in POD.  Of course, you'll have to process
+.\" the output yourself in some meaningful fashion.
+.if \nF \{\
+.    de IX
+.    tm Index:\\$1\t\\n%\t"\\$2"
+.    .
+.    nr % 0
+.    rr F
+.\}
+.\"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it
+.\" makes way too many mistakes in technical documents.
+.hy 0
+.if n .na
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
+.bd B 3
+.    \" fudge factors for nroff and troff
+.if n \{\
+.    ds #H 0
+.    ds #V .8m
+.    ds #F .3m
+.    ds #[ \f1
+.    ds #] \fP
+.\}
+.if t \{\
+.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+.    ds #V .6m
+.    ds #F 0
+.    ds #[ \&
+.    ds #] \&
+.\}
+.    \" simple accents for nroff and troff
+.if n \{\
+.    ds ' \&
+.    ds ` \&
+.    ds ^ \&
+.    ds , \&
+.    ds ~ ~
+.    ds /
+.\}
+.if t \{\
+.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+.    \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+.    \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+.    \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+.    ds : e
+.    ds 8 ss
+.    ds o a
+.    ds d- d\h'-1'\(ga
+.    ds D- D\h'-1'\(hy
+.    ds th \o'bp'
+.    ds Th \o'LP'
+.    ds ae ae
+.    ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ======================================================================
+.\"
+.IX Title "GETMACS.8 1"
+.TH GETMACS.8 1 "perl v5.6.0" "2008-01-08" "User Contributed Perl Documentation"
+.UC
+.SH "NAME"
+\&\fBgetmacs\fR \- Collect mac addresses. 
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+\&\fBgetmacs\fR
+\&\fInoderange\fR
+.PP
+\&\fBgetmacs\fR
+[\fB\-h\fR|\fB\*(--help\fR]
+.PP
+\&\fBgetmacs\fR
+[\fB\-v\fR|\fB\*(--version\fR]
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+Collects \s-1MAC\s0 addresses of the input noderange.  
+.SH "EXAMPLES"
+.IX Header "EXAMPLES"
+.Vb 4
+\& getmacs 1,3 
+\& getmacs 14-56,70-203 
+\& getmacs 1,3,14-56,70-203 
+\& getmacs all,-129-256
+.Ve