diff --git a/xCAT-server/share/xcat/netboot/centos/mkhpcimage.example b/xCAT-server/share/xcat/netboot/centos/mkhpcimage.example
deleted file mode 100755
index f2d3f9a2b..000000000
--- a/xCAT-server/share/xcat/netboot/centos/mkhpcimage.example
+++ /dev/null
@@ -1,170 +0,0 @@
-################################################################################
-#  Create a generic HPC image 
-#  This script is an example of how to create an HPC image with xCAT stateless.
-#  in this example you may need to change some of the parameters.  In the future
-#  we should probably place this in the database...
-#  All good sys admins can reproduce their environments.  Creating a stateless 
-#  image should be reproducable.  Doing this with a script is a good idea.
-#  
-################################################################################
-
-
-# specify the OS stuff.  You'll probably want to change this.  If you do then you'll
-# need to make sure there is a *.pkglist and *.exlist
-PROFILE=compute
-ARCH=x86_64
-OS=centos5.3
-
-# this is where the OS image will reside
-IMGROOT=/install/netboot/$OS/$ARCH/$PROFILE/rootimg
-
-# remove the old image if it exists.
-rm -rf /install/netboot/$OS/$ARCH/$PROFILE
-
-# generate the base image
-# for IBM: tg3 in older blades, bnx in newer stuff, and igb in the nehalem based products.
-/opt/xcat/share/xcat/netboot/centos/genimage -i eth0 -n libphy,tg3,bnx2,igb -o $OS -p $PROFILE
-
-# update the yum database in the image
-rm -rf $IMGROOT/etc/yum.repos.d
-yum --installroot=$IMGROOT clean all
-cp -a /etc/yum.repos.d/ $IMGROOT/etc/
-rm -rf $IMGROOT/etc/yum.repos.d/xCAT-*
-
-# no selinux!!
-echo SELINUX=disabled > $IMGROOT/etc/sysconfig/selinux
-
-# fix respawns
-cp $IMGROOT/etc/inittab $IMGROOT/etc/inittab.ORIG
-grep -v 38400 $IMGROOT/etc/inittab.ORIG  > $IMGROOT/etc/inittab
-
-# filesystem setup, you'll want to customize this.  We have swap and scratch
-# configured here.  But if you don't have disks then this may not help.
-# we name our / partition the image name (compute by default) plus a timestamp.
-
-TIME=`date +%s`
-cp $IMGROOT/etc/fstab $IMGROOT/etc/fstab.ORIG
-echo "proc /proc proc rw 0 0
-sysfs /sys sysfs rw 0 0
-devpts /dev/pts devpts rw,gid=5,mode=620 0 0
-$PROFILE-$TIME / tmpfs rw 0 1
-#/dev/sda1  swap  swap defaults 0 0
-#/dev/sda2  /scratch ext3 defaults 0 0
-" > $IMGROOT/etc/fstab
-mkdir $IMGROOT/scratch 
-
-### get ntp to start on boot
-chroot $IMGROOT chkconfig --level 345 ntpd on
-
-#### user stuff so that we can do some work ####
-cp /etc/shadow $IMGROOT/etc/
-cp /etc/group $IMGROOT/etc/
-cp /etc/passwd $IMGROOT/etc/
-cp /etc/hosts $IMGROOT/etc/
-
-### scaling fixes #####
-echo "# increase TCP max buffer size
-net.core.rmem_max = 33554432
-net.core.wmem_max = 33554432
-net.core.rmem_default = 65536
-net.core.wmem_default = 65536
-# increase Linux autotuning TCP buffer limits
-# min, default, and max number of bytes to use
-net.ipv4.tcp_rmem = 4096 33554432 33554432
-net.ipv4.tcp_wmem = 4096 33554432 33554432
-net.ipv4.tcp_mem= 33554432 33554432 33554432
-net.ipv4.route.flush=1
-net.core.netdev_max_backlog=1500
-
-#GPFS / NFS Tuning
-net.ipv4.conf.all.arp_filter = 1
-net.ipv4.conf.all.rp_filter = 1
-net.ipv4.neigh.default.gc_thresh1 = 1024
-net.ipv4.neigh.default.gc_thresh2 = 4096
-net.ipv4.neigh.default.gc_thresh3 = 8192
-net.ipv4.neigh.default.gc_stale_time = 24" >> $IMGROOT/etc/sysctl.conf
-
-## Limits: need to make sure users can have unlimited memory (ulimit -l unlimited)
-cp /etc/security/limits.conf $IMGROOT/etc/security/
-
-### add torque ### 
-/opt/xcat/share/xcat/netboot/add-on/torque/add_torque $IMGROOT mgt /opt/torque / local
-
-# update the limit on pegged memory limit and if they have old xCAT then make sure
-# it says torque instead of pbs in the paths of the config file.
-perl -pi -e 's/ulimit -n 20000/ulimit -n 20000; ulimit -l unlimited/g' $IMGROOT/etc/init.d/pbs_mom
-perl -pi -e 's/spool\/pbs/spool\/torque/g' $IMGROOT/etc/init.d/pbs_mom
-perl -pi -e 's/spool\/pbs/spool\/torque/g' $IMGROOT/etc/init.d/pbs_mom
-perl -pi -e 's/PBS_HOME=\/var\/spool\/pbs/PBS_HOME=\/var\/spool\/torque/g' $IMGROOT/var/spool/torque/mom_priv/epilogue
-perl -pi -e 's/PBS_HOME=\/var\/spool\/pbs/PBS_HOME=\/var\/spool\/torque/g' $IMGROOT/var/spool/torque/mom_priv/prologue
-perl -pi -e 's/PBS_HOME=\/var\/spool\/pbs/PBS_HOME=\/var\/spool\/torque/g' $IMGROOT/var/spool/torque/mom_priv/takedownnode
-
-### stateless init script does NTP, syslog, etc. ####
-cp /etc/localtime $IMGROOT/etc/
-cp /opt/xcat/share/xcat/netboot/add-on/stateless/stateless $IMGROOT/etc/init.d/
-perl -pi -e 's!Mountain!Mexico/General!g' $IMGROOT/etc/init.d/stateless
-perl -pi -e 's/driftfile \/etc\/ntp/driftfile \/var\/lib\/ntp/g' $IMGROOT/etc/init.d/stateless
-perl -pi -e 's/keys \/etc\/ntp/keys \/var\/lib\/ntp/g' $IMGROOT/etc/init.d/stateless
-rm -rf $IMGROOT/etc/sysconfig/clock
-chroot $IMGROOT chkconfig --level 345 stateless on
-chroot $IMGROOT chkconfig --level 345 rsyslog on
-
-### make sure dhcp boot protocol is set to none ###
-perl -pi -e 's/dhcp/none/g' $IMGROOT/etc/sysconfig/network-scripts/ifcfg-eth0
-
-#### add GPFS stuff ###
-# this is an example of a stateless GPFS implementation.  Uncomment the below if you 
-# want GPFS.  Make sure you have the GPFS RPMs to do this.
-#GPFSSRCDIR=/install/GPFS
-#yum --installroot=$IMGROOT -y install glibc ksh compat-libstdc++-33 binutils rsh
-#rpm -ivh --root=$IMGROOT $GPFSSRCDIR/gpfs.base*rpm
-#rpm -ivh --root=$IMGROOT $GPFSSRCDIR/gpfs.gpl*rpm
-#rpm -ivh --root=$IMGROOT $GPFSSRCDIR/gpfs.msg*rpm
-#rpm -Uivh --root=$IMGROOT $GPFSSRCDIR/updates/gpfs.base*rpm
-#rpm -Uivh --root=$IMGROOT $GPFSSRCDIR/updates/gpfs.gpl*rpm
-#rpm -Uivh --root=$IMGROOT $GPFSSRCDIR/updates/gpfs.msg*rpm
-##
-#AUTOGPFSDIR=/opt/xcat/share/xcat/netboot/add-on/autogpfs
-#cp $AUTOGPFSDIR/autogpfsc.pl $IMGROOT/usr/sbin
-#cp $AUTOGPFSDIR/autogpfsc $IMGROOT/etc/init.d/
-#echo "SERVERS=mgt
-#PORT=3003
-#BLOCK=no" >> $IMGROOT/etc/sysconfig/autogpfsc
-#
-#chroot $IMGROOT chkconfig --level 345 autogpfsc on
-#cp $GPFSSRCDIR/2.6.18-128.el5/* $IMGROOT/usr/lpp/mmfs/bin/
-#cp /etc/profile.d/gpfs.sh $IMGROOT/etc/profile.d/
-### End GPFS Stuff ####
-
-
-### IB Stuff ####
-# if you have InfiniBand on your machines then you probably have an OFED distribution you
-# need to add.  Here is an example of how to add it.
-#echo "Adding InfiniBand"
-#yum --installroot=$IMGROOT -y install bind-utils which rpm tcl tk glibc-devel.i386 pciutils expat libgfortran.x86_64 libgomp.x86_64 tcsh
-#
-#IBROOT=/install/voltaire/VoltaireOFED-1.4.2_2-k2.6.18-128.el5-x86_64
-#mount -o bind /proc $IMGROOT/proc
-#mount -o bind /sys $IMGROOT/sys
-#mount -o bind $IBROOT $IMGROOT/mnt
-#chroot $IMGROOT /mnt/install.sh --without-mpi
-#umount $IMGROOT/mnt
-#umount $IMGROOT/sys
-#umount $IMGROOT/proc
-# configure IB IP address
-#echo "IP=\`host \$HOSTNAME-ib0 | awk '{ print \$4 }' | head -1\`" >> $IMGROOT/etc/rc.d/rc.local
-#echo "ifconfig ib0 \$IP" >> $IMGROOT/etc/rc.d/rc.local
-#echo "ifconfig ib0 netmask 255.255.0.0" >> $IMGROOT/etc/rc.d/rc.local
-### End IB Stuff ####
-
-# configure name resolution
-# change this to what you want it to be.  (this is in site.tab as the domain and nameservers)
-echo "search cluster.foo 
-nameserver 172.20.0.1" >$IMGROOT/etc/resolv.conf
-
-
-### uniq-i-fy Torque OS name
-echo "opsys compute_centos5.3" >> $IMGROOT/var/spool/torque/mom_priv/config
-
-packimage -p $PROFILE -a $ARCH -o $OS
-echo "Image $PROFILE-$TIME created"