diff --git a/xCAT-client/pods/man8/xcatsetup.8.pod b/xCAT-client/pods/man8/xcatsetup.8.pod index 791cbdfe4..34ec3c7f2 100644 --- a/xCAT-client/pods/man8/xcatsetup.8.pod +++ b/xCAT-client/pods/man8/xcatsetup.8.pod @@ -101,7 +101,7 @@ This sample configuration file is for a 2 building block cluster. # The nameservers in site table will be set with the value of master automatically. xcat-service-lan: - # IP range used for DHCP. If you set the entry, the networks table will be filled + # IP range used for DHCP. If you set the entry, the networks table will be filled # automatically with this range and the dhcp interface will be set in the site table. dhcp-dynamic-range = 50.0.0.0-50.0.0.200 @@ -115,13 +115,22 @@ This sample configuration file is for a 2 building block cluster. num-frames-per-hmc = 3 # this lists which serial numbers go with which frame numbers vpd-file = vpd2bb.stanza + # There are two rules of defining FSP/BPAs. The first defining the node's host name by increasing the last bit + # of IP address, while the second defining the node's name by varying the second bit and the third bit of IP. # This assumes you have 2 service LANs: a primary service LAN 10.230.0.0/255.255.0.0 that all of the port 0's # are connected to, and a backup service LAN 10.231.0.0/255.255.0.0 that all of the port 1's are connected to. - bpa-a-0-starting-ip = 10.230.1.1 - bpa-b-0-starting-ip = 10.230.2.1 - bpa-a-1-starting-ip = 10.231.1.1 - bpa-b-1-starting-ip = 10.231.2.1 - + # bpa-a-0-starting-ip = 10.230.1.1 + # bpa-b-0-starting-ip = 10.230.2.1 + # bpa-a-1-starting-ip = 10.231.1.1 + # bpa-b-1-starting-ip = 10.231.2.1 + # This assumes you have 2 service LANs: a primary service LAN 40.x.y.z/255.0.0.0 that all of the port 0's + # are connected to, and a backup service LAN 41.x.y.z/255.0.0.0 that all of the port 1's are connected to. + # "x" is the frame number and "z" is the bpa/fsp id (1 for the first BPA/FSP in the Frame/CEC, 2 for the + # second BPA/FSP in the Frame/CEC). For BPAs "y" is always be 0 and for FSPs "y" is the cec id. + vlan-1 = 40 + vlan-2 = 41 + + xcat-cecs: # These are the connections to the CECs. Either form of hostname is supported. #hostname-range = cec01-cec64 @@ -134,13 +143,13 @@ This sample configuration file is for a 2 building block cluster. supernode-list = supernodelist2bb.txt # If you do not want to specify the supernode-list at this time and you have a consistent # number of cecs in each frame, you can instead just use this setting: - #num-cecs-per-frame = 12 - fsp-a-0-starting-ip = 10.230.3.1 - fsp-b-0-starting-ip = 10.230.4.1 - fsp-a-1-starting-ip = 10.231.3.1 - fsp-b-1-starting-ip = 10.231.4.1 - - + num-cecs-per-frame = 12 + #fsp-a-0-starting-ip = 10.230.3.1 + #fsp-b-0-starting-ip = 10.230.4.1 + #fsp-a-1-starting-ip = 10.231.3.1 + #fsp-b-1-starting-ip = 10.231.4.1 + + xcat-building-blocks: num-frames-per-bb = 3 num-cecs-per-bb = 32 @@ -149,7 +158,8 @@ This sample configuration file is for a 2 building block cluster. num-lpars-per-cec = 8 # If you set these, then do not set the corresponding attributes in the other node stanzas below. # Except you still need to set xcat-service-nodes:starting-ip (which is the ethernet adapter) - hostname-range = f[1-6]c[01-12]p[1-8] + #hostname-range = f[1-6]c[01-12]p[1-8] + hostname-range = f[1-6]c[01-12]p[01,05,09,13,17,21,25,29] starting-ip = 10.1.1.1 aliases = -hf0 # ml0 is for aix. For linux, use bond0 instead. @@ -162,7 +172,7 @@ This sample configuration file is for a 2 building block cluster. # this is for the ethernet NIC on each SN #hostname-range = sn1-sn4 starting-ip = 10.10.1.1 - # this value is the same format as the hosts.otherinterfaces attribute except + # this value is the same format as the hosts.otherinterfaces attribute except # the IP addresses are starting IP addresses #otherinterfaces = -hf0:10.10.1.1,-hf1:10.11.1.1,-hf2:10.12.1.1,-hf3:10.13.1.1,-ml0:10.14.1.1 @@ -247,9 +257,14 @@ VPD data or supernode numbers at this time. hostname-range = frame[1-2] xcat-cecs: - hostname-range = cec[01-24] + #hostname-range = cec[01-24] + hostname-range = f[1-2]c[01-12] num-cecs-per-frame = 12 + + xcat-lpars: + hostname-range = f[1-2]c[01-12]p[01,05,09,13,17,21,25,29] + =head2 Database Attributes Written The following lists which database attributes are filled in as a result of each stanza. Note that depending on the values @@ -265,7 +280,7 @@ site table: domain, nameservers, topology site table: ea_primary_hmc, ea_backup_hmc -nodelist table: node, groups (all HMCs (hmc) ) +nodelist table: node, groups (all HMCs (hmc) ), hidden hosts table: node, ip @@ -275,11 +290,21 @@ nodetype table: node, nodetype =item B -nodelist table: node, groups (all frames (frame) ) +nodelist table: node, groups (all frames (frame) ), hidden -hosts table: node, ip +ppc table: node, id, hcp, nodetype, sfp -ppc table: node, id, hcp +nodetype table: node, nodetype + +nodehm table: node, mgt + +vpd table: node, serial, mtm, side + +=item B + +nodelist table: node, groups (bpa,all) , hidden + +ppc table: node, id, hcp, nodetype, parent nodetype table: node, nodetype @@ -289,9 +314,8 @@ vpd table: node, serial, mtm, side =item B -nodelist table: node, groups (all CECs (cec), all CECs in a frame (cec) ) +nodelist table: node, groups (all CECs (cec), all CECs in a frame (cec) ), hidden -hosts table: node, ip ppc table: node, supernode, hcp, id, parent @@ -303,9 +327,21 @@ nodegroup table: groupname, grouptype, members, wherevals (all nodes in a CEC ( nodepos: rack, u +=item B + +nodelist table: node, groups (fsp,all), hidden + +ppc table: node, id, hcp, nodetype, parent + +nodetype table: node, nodetype + +nodehm table: node, mgt + +vpd table: node, serial, mtm, side + =item B -site table: sharedtftp +site table: sharedtftp, sshbetweennodes(service) ppc table: node, parent (for frame)