diff --git a/xCAT-server/share/xcat/netboot/add-on/statelite/rc.localdisk b/xCAT-server/share/xcat/netboot/add-on/statelite/rc.localdisk
deleted file mode 100644
index d6c7883b9..000000000
--- a/xCAT-server/share/xcat/netboot/add-on/statelite/rc.localdisk
+++ /dev/null
@@ -1,280 +0,0 @@
-#! /bin/sh
-
-MNTDIR="/sysroot"
-
-PARTLOG=/tmp/partlog
-PARTFILE=/tmp/partition
-SCRIPTFILE=/tmp/partscript
-
-disk=0
-localspace=0
-swapspace=0
-partnum=0
-
-isscript=0
-isformat=0
-
-# Get the xCAT server from kernel parameter
-for i in `cat /proc/cmdline`; do
-    KEY=`echo $i | awk -F= '{print $1}'`
-    if [ x"$KEY" = x"XCAT" ]; then
-        XCATSERVER=`echo $i | awk -F= '{print $2}'`
-    elif [ x"$KEY" = x"PARTITION" ]; then
-        DOPART="yes"
-    fi
-done
-
-if [ x"$DOPART" != x"yes" ]; then
-    # do nothing
-    echo "local disk: do nothing"
-    exit 0
-fi
-
-if [ x$XCATSERVER = x ]; then
-    echo "Error: Cannot find the xCAT server to configure local disk."
-    exit 1
-fi
-
-xCATCmd () {
-# $1 is the xCAT server
-# $2 is the command
-    arch=`uname -m`
-    if [ x$arch = x"ppc64" ]; then
-        echo "<xcatrequest>\n<command>${2}</command>\n</xcatrequest>" | /usr/sbin/chroot ${MNTDIR} /usr/bin/openssl s_client -quiet -connect ${1} -rand /bin/nice 2>/dev/null
-    else
-        echo "<xcatrequest>\n<command>${2}</command>\n</xcatrequest>" | LD_LIBRARY_PATH=${MNTDIR}/lib64:${MNTDIR}/usr/lib64 ${MNTDIR}/usr/bin/openssl s_client -quiet -connect ${1} -rand /bin/nice 2>/dev/null
-    fi
-}
-
-doconfigure () {
-    # run the configure script
-    if [ $isscript -eq 1 ]; then
-        # run the script
-        chmod +x $SCRIPTFILE
-        $SCRIPTFILE
-        exit 0
-    fi
-
-    if [ x"$enable" != x"yes" ]; then
-        exit 1
-    fi
-    if [ $disk -eq 1 ]; then
-        if [ x"$enablepart" != x"yes" ]; then
-            return
-        fi
-        if [ ! -r $dev ]; then
-            echo "Error: Cannot find the device $dev"
-            exit 1
-        fi
-        if [ ! -r "/sbin/parted" -a ! "/usr/sbin/parted" ]; then
-            echo "Error: Cannot get parted command to do the partitioning for local disk"
-            exit 1
-        fi
-
-        # remove all the partitions on the device
-        # the output of parted -l -s -m should like
-        #BYT;
-        ##/dev/sda:73.4GB:scsi:512:512:msdos:IBM-ESXS ST373455SS;
-        ##1:1049kB:72.3GB:72.3GB:ext4::boot;
-        ##2:72.3GB:73.4GB:1073MB:linux-swap(v1)::;
-
-        `parted -lsm > $PARTLOG`
-        getpart=0
-        while read PLINE
-        do
-            msg=`echo $PLINE | grep 'unrecognised disk label'`
-            if [ x"$msg" != x ]; then
-                devname=`echo $PLINE | awk -F' ' '{print $2}' | sed -e "s/://g"`
-            
-                if [ x$devname = x"$dev" ]; then
-                    #create the label
-                    `parted -s $dev mklabel msdos`
-                fi
-            fi
-        done <  $PARTLOG
-
-        `parted -lsm > $PARTLOG`
-        
-        partinfo=`parted -lsm`
-        # Verbose message
-        echo "Original partition list"
-        echo $partinfo
-        
-        getpart=0
-        while read PLINE
-        do
-            name=`echo $PLINE | awk -F: '{print $1}'`
-            if [ x"$name" = x"BYT;" ]; then
-                if [ $getpart -eq 1 ]; then
-                    #getpart=0
-                    break
-                fi
-            fi
-            if [ x"$name" = x"$dev" ]; then
-                getpart=1
-                localdisksize=`echo $PLINE | awk -F: '{print $2}'`
-                echo "localdisk: $localdisk - $localdisksize"
-            elif [  $getpart -eq 1 -a x$name != "x" -a x$name != x"Error" ]; then
-                if [ x$clear != x ]; then
-                    `parted $dev rm $name >/dev/null`
-                    echo "Remove the partion $name"
-                    sleep 1
-                else
-                    partnum=`expr $partnum + 1`
-                fi
-            fi
-        done < $PARTLOG 
-
-        if [ $getpart -eq 0 ]; then
-            echo "Error: Cannot get partition information for $dev"
-            exit 1
-        fi
-
-        # make the partition
-        parts=`echo $parts | sed -e 's/ //g' | sed -e 's/,/ /g'`
-        endpoint=0
-        for part in $parts
-        do
-            if echo $part | grep '-'; then
-                # should be format 10G-20G
-                start=`echo $part |awk -F- '{print $1}'`
-                end=`echo $part |awk -F- '{print $2}'`
-                echo "Create partition $start - $end"
-                `parted -s $dev mkpart primary $start $end > /dev/null`
-                sleep 1
-            else
-                # should be a number which is the percentage of the total
-                # compute the space depend on the size of disk
-                ldsize=`echo $localdisksize | sed "s/\([0-9\.]*\).*/\1/"`
-                ldunit=`echo $localdisksize | sed "s/[0-9\.]*//" | sed "s/\(.\).*/\1/"`
-                partsize=`echo "$ldsize * $part" | bc`
-                partsize=`echo "$partsize / 100" | bc`
-                start=$endpoint$ldunit
-                endpoint=`expr $endpoint + $partsize`
-                end=$endpoint$ldunit
-                echo "Create partition $start - $end: $fstype"
-                `parted -s $dev mkpart primary $start $end > /dev/null`
-                sleep 1
-            fi
-
-            # create the filesystem
-            if [ x$fstype = x ]; then
-                fstype=ext3
-            fi
-            partnum=`expr $partnum + 1`
-            partdev=$dev$partnum
-            echo "Create filesystem $fstype on $partdev"
-            `mke2fs -q $partdev -t $fstype > /dev/null`
-            sleep 1
-        done
-    elif [ $localspace -eq 1 ]; then
-        if [ x$fstype = x ]; then
-            fstype=ext3
-        fi
-        echo "Mount $dev to /.sllocal with $fstype"
-        `mount -t $fstype $dev $MNTDIR/.sllocal`
-    elif [ $swapspace -eq 1 ]; then
-        echo "Create swap on $dev"
-        `mkswap $dev > /dev/null`
-        echo "Enable swap on $dev"
-        `swapon $dev`
-    fi
-}
-
-xCATCmd $XCATSERVER getpartition \
-    | sed  -e 's/<[^>]*>//g' \
-    | egrep -v '^ *$' \
-    | egrep -v '^#.*$' \
-    | sed -e 's/^ *//' \
-    > $PARTFILE
-
-MAX_RETRIES=15
-RETRY=0
-while [ ! -s $PARTFILE ]; do
-    # the file is empty, we should retry several times
-    RETRY=$(( $RETRY+1 ))
-    if [ $RETRY -eq $MAX_RETRIES ]; then
-        echo "Error: Cannot get the partition configuration file from xCAT server."
-        exit 1
-    fi
-
-    SLI=$(( $RANDOM%50 ))
-    sleep $SLI
-
-    xCATCmd $XCATSERVER getpartition \
-        | sed  -e 's/<[^>]*>//g' \
-        | egrep -v '^ *$' \
-        | sed -e 's/^ *//' \
-        > $PARTFILE
-done
-
-# Parse the argument from the partition file
-while read LINE
-do
-    if [ x$firstline = x ]; then
-        firstline=$LINE
-        # the format of first line should be: type=script|format
-        key=`echo \$firstline |awk -F= '{print \$1}'`
-        if [ x$key != x"type" ]; then
-            echo "Error: Cannot recognize the format of the parition configuration file."
-            exit 1
-        fi
-        value=`echo \$firstline |awk -F= '{print \$2}'`
-        if [ x$value = x"script" ]; then
-            isscript=1
-        elif [ x$value = x"format" ]; then
-            isformat=1
-        fi
-        continue
-    fi
-    if [ $isscript -eq 1 ]; then
-        echo $LINE | sed -e 's/&lt;/</g' -e 's/&gt;/>/g' -e 's/&amp;/&/g' -e 's/&quot;/"/g' -e "s/&apos;/'/g" >> $SCRIPTFILE
-    elif [ $isformat -eq 1 ]; then
-        # parse the attributes for the partition configuration
-        if [ x$LINE = x"[disk]" ]; then
-            doconfigure
-            disk=1
-            partnum=0
-            localspace=0
-            swapspace=0
-            fstype=""
-            dev=""
-            clear=""
-            parts=""
-        elif [ x$LINE = x"[localspace]" ]; then
-            doconfigure
-            disk=0
-            localspace=1
-            swapspace=0
-            dev=""
-            fstype=""
-        elif [ x$LINE = x"[swapspace]" ]; then
-            doconfigure
-            disk=0
-            localspace=0
-            swapspace=1
-            dev=""
-        else
-            key=`echo \$LINE |awk -F= '{print \$1}'`
-            value=`echo \$LINE |awk -F= '{print \$2}'`
-            if [ x$key = x"dev" ]; then
-                dev=$value
-            elif [ x$key = x"clear" ]; then
-                clear=$value
-            elif [ x$key = x"parts" ]; then
-                parts=$value
-            elif [ x$key = x"fstype" ]; then
-                fstype=$value
-            elif [ x$key = x"enable" ]; then
-                enable=$value
-                if [ x$enable != x"yes" ]; then
-                    exit 1
-                fi
-            elif [ x$key = x"enablepart" ]; then
-                enablepart=$value
-            fi 
-        fi
-    fi
-done <  $PARTFILE
-doconfigure
-