diff --git a/perl-xCAT/xCAT/Schema.pm b/perl-xCAT/xCAT/Schema.pm index ca45297a8..e68fc9ed3 100644 --- a/perl-xCAT/xCAT/Schema.pm +++ b/perl-xCAT/xCAT/Schema.pm @@ -732,15 +732,16 @@ linuximage => { }, }, winimage => { - cols => [qw(imagename template installto partitionfile comments disable)], + cols => [qw(imagename template installto partitionfile winpepath comments disable)], keys => [qw(imagename)], tablespace =>'XCATTBS32K', table_desc => 'Information about a Windows operating system image that can be used to deploy cluster nodes.', descriptions => { imagename => 'The name of this xCAT OS image definition.', template => 'The fully qualified name of the template file that is used to create the windows unattend.xml file for diskful installation.', - installto => 'The disk and partition that the Windows will be deployed to. The valid format is :. If it is not set, default value is 0:1 for bios boot mode(legacy) and 0:3 for uefi boot mode; If it is set to 1, it means 1:1 for bios boot and 1:3 for uefi boot', - partitionfile => 'The path of partition configuration file. Since the partition configuration for bios boot mode and uefi boot mode are different, this configuration file should include two parts if customer wants to support both bios and uefi mode. If customer just wants to support one of the modes, specify one of them anyway. Example of partition configuration file: [BIOS]xxxxxxx[UEFI]yyyyyyy.', + installto => 'The disk and partition that the Windows will be deployed to. The valid format is :. If not set, default value is 0:1 for bios boot mode(legacy) and 0:3 for uefi boot mode; If setting to 1, it means 1:1 for bios boot and 1:3 for uefi boot', + partitionfile => 'The path of partition configuration file. Since the partition configuration for bios boot mode and uefi boot mode are different, this configuration file should include two parts if customer wants to support both bios and uefi mode. If customer just wants to support one of the modes, specify one of them anyway. Example of partition configuration file: [BIOS]xxxxxxx[UEFI]yyyyyyy. To simplify the setting, you also can set installto in partitionfile with section likes [INSTALLTO]0:1', + winpepath => 'The path of winpe which will be used to boot this image. If the real path is /tftpboot/winboot/winpe1/, the value for winpepath should be set to winboot/winpe1', comments => 'Any user-written notes.', disable => "Set to 'yes' or '1' to comment out this row.", } @@ -2738,6 +2739,11 @@ push(@{$defspec{node}->{'attrs'}}, @nodeattrs); tabentry => 'winimage.partitionfile', access_tabentry => 'winimage.imagename=attr:imagename', }, +{attr_name => 'winpepath', + only_if => 'imagetype=windows', + tabentry => 'winimage.winpepath', + access_tabentry => 'winimage.imagename=attr:imagename', + }, #################### # nimimage table# #################### diff --git a/src/proxydhcp.c b/src/proxydhcp.c index 530fcfad4..cc9a265a3 100644 --- a/src/proxydhcp.c +++ b/src/proxydhcp.c @@ -6,84 +6,275 @@ #include #include #include -int main() { - int serverfd,port; - int getpktinfo = 1; - struct addrinfo hint, *res; - char cmsg[CMSG_SPACE(sizeof(struct in_pktinfo))]; - char clientpacket[1024]; - struct sockaddr_in clientaddr; - struct msghdr msg; - struct cmsghdr *cmsgptr; - struct iovec iov[1]; - unsigned int myip; - char *txtptr; - iov[0].iov_base = clientpacket; - iov[0].iov_len = 1024; - memset(&msg,0,sizeof(msg)); - memset(&clientaddr,0,sizeof(clientaddr)); - msg.msg_name=&clientaddr; - msg.msg_namelen = sizeof(clientaddr); - msg.msg_iov = iov; - msg.msg_iovlen = 1; - msg.msg_control=&cmsg; - msg.msg_controllen = sizeof(cmsg); - - - char bootpmagic[4] = {0x63,0x82,0x53,0x63}; - int pktsize; - int doexit=0; - port = 4011; - memset(&hint,0,sizeof(hint)); - hint.ai_family = PF_INET; /* Would've done UNSPEC, but it doesn't work right and this is heavily v4 specific anyway */ - hint.ai_socktype = SOCK_DGRAM; - hint.ai_flags = AI_PASSIVE; - getaddrinfo(NULL,"4011",&hint,&res); - serverfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol); - if (!serverfd) { fprintf(stderr,"That's odd...\n"); } - setsockopt(serverfd,IPPROTO_IP,IP_PKTINFO,&getpktinfo,sizeof(getpktinfo)); - if (bind(serverfd,res->ai_addr ,res->ai_addrlen) < 0) { - fprintf(stderr,"Unable to bind 4011"); - exit(1); - } - while (!doexit) { - pktsize = recvmsg(serverfd,&msg,0); - if (pktsize < 320) { - continue; - } - if (clientpacket[0] != 1 || memcmp(clientpacket+0xec,bootpmagic,4)) { - continue; - } - for (cmsgptr = CMSG_FIRSTHDR(&msg); cmsgptr != NULL; cmsgptr = CMSG_NXTHDR(&msg,cmsgptr)) { - if (cmsgptr->cmsg_level == IPPROTO_IP && cmsgptr->cmsg_type == IP_PKTINFO) { - myip = ((struct in_pktinfo*)(CMSG_DATA(cmsgptr)))->ipi_addr.s_addr; - } - } - clientpacket[0] = 2; //change to a reply - myip = htonl(myip); //endian neutral change - clientpacket[0x14] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better - clientpacket[0x15] = (myip>>16)&0xff; - clientpacket[0x16] = (myip>>8)&0xff; - clientpacket[0x17] = (myip)&0xff; - txtptr = clientpacket+0x6c; - strncpy(txtptr,"Boot/bootmgfw.efi",128); // keeping 128 in there just in case someone changes the string - clientpacket[0xf0]=0x35; //DHCP MSG type - clientpacket[0xf1]=0x1; // LEN of 1 - clientpacket[0xf2]=0x5; //DHCP ACK - clientpacket[0xf3]=0x36; //DHCP server identifier - clientpacket[0xf4]=0x4; //DHCP server identifier length - clientpacket[0xf5] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better - clientpacket[0xf6] = (myip>>16)&0xff; - clientpacket[0xf7] = (myip>>8)&0xff; - clientpacket[0xf8] = (myip)&0xff; - clientpacket[0xf9] = 0xfc; // dhcp 252 'proxy', but coopeted by bootmgfw, it's actually suggesting the boot config file - clientpacket[0xfa] = 9; //length of 9 - txtptr = clientpacket+0xfb; - strncpy(txtptr,"Boot/BCD",8); - clientpacket[0x103]=0; - clientpacket[0x104]=0xff; - sendto(serverfd,clientpacket,pktsize,0,(struct sockaddr*)&clientaddr,sizeof(clientaddr)); - } +#include +#include + +// the chunk size for each alloc +int chunknum = 200; +int doreload = 0; +int verbose = 0; +char logmsg[50]; + +// the struct to store the winpe configuration for each node +struct nodecfg { + char node[50]; + char data[150]; +}; + +char *data = NULL; // the ptr to the array of all node config +int nodenum = 0; + +// trigger the main program to reload configuration file +void reload(int sig) { + doreload = 1; +} +// the subroutine which is used to load configuration from +// /var/lib/xcat/proxydhcp.cfg to *data +void loadcfg () { + nodenum = 0; + free(data); + data = NULL; + doreload = 0; + + char *dp = NULL; + + FILE *fp; + fp = fopen("/var/lib/xcat/proxydhcp.cfg", "r"); + if (fp) { + int num = chunknum; + int rtime = 1; + while (num == chunknum) { + // realloc the chunknum size of memory each to save memory usage + data = realloc(data, sizeof(struct nodecfg) * chunknum * rtime); + if (NULL == data) { + fprintf (stderr, "Cannot get enough memory.\n"); + free (data); + return; + } + dp = data + sizeof(struct nodecfg) * chunknum * (rtime - 1); + memset(dp, 0, sizeof(struct nodecfg) * chunknum); + num = fread(dp, sizeof (struct nodecfg), chunknum, fp); + nodenum += num; + rtime++; + } + fclose(fp); + } +} + +// get the path of winpe from configuration file which is stored in *data +char *getwinpepath(char *node) { + int i; + struct nodecfg *nc = (struct nodecfg *)data; + for (i=0; inode, node)) { + return nc->data; + } + nc++; + } + + return NULL; +} + + +int main(int argc, char *argv[]) { + int i; + for(i = 0; i < argc; i++) + { + if (strcmp(argv[i], "-V") == 0) { + verbose = 1; + setlogmask(LOG_UPTO(LOG_DEBUG)); + openlog("proxydhcp", LOG_NDELAY, LOG_LOCAL0); + } + } + + // regist my pid to /var/run/xcat/proxydhcp.pid + int pid = getpid(); + FILE *pidf = fopen ("/var/run/xcat/proxydhcp.pid", "w"); + if (pidf) { + fprintf(pidf, "%d", pid); + fclose (pidf); + } else { + fprintf (stderr, "Cannot open /var/run/xcat/proxydhcp.pid\n"); + return 1; + } + + // load configuration at first start + loadcfg(); + + // regist signal SIGUSR1 for triggering reload configuration from outside + struct sigaction sigact; + sigact.sa_handler = &reload; + sigaction(SIGUSR1, &sigact, NULL); + + int serverfd,port; + int getpktinfo = 1; + struct addrinfo hint, *res; + char cmsg[CMSG_SPACE(sizeof(struct in_pktinfo))]; + char clientpacket[1024]; + struct sockaddr_in clientaddr; + struct msghdr msg; + struct cmsghdr *cmsgptr; + struct iovec iov[1]; + unsigned int myip, clientip; + char *txtptr; + iov[0].iov_base = clientpacket; + iov[0].iov_len = 1024; + memset(&msg,0,sizeof(msg)); + memset(&clientaddr,0,sizeof(clientaddr)); + msg.msg_name=&clientaddr; + msg.msg_namelen = sizeof(clientaddr); + msg.msg_iov = iov; + msg.msg_iovlen = 1; + msg.msg_control=&cmsg; + msg.msg_controllen = sizeof(cmsg); + + char defaultwinpe[20] = "Boot/bootmgfw.efi"; + char bootpmagic[4] = {0x63,0x82,0x53,0x63}; + int pktsize; + int doexit=0; + port = 4011; + memset(&hint,0,sizeof(hint)); + hint.ai_family = PF_INET; /* Would've done UNSPEC, but it doesn't work right and this is heavily v4 specific anyway */ + hint.ai_socktype = SOCK_DGRAM; + hint.ai_flags = AI_PASSIVE; + getaddrinfo(NULL,"4011",&hint,&res); + serverfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol); + if (!serverfd) { fprintf(stderr,"That's odd...\n"); } + setsockopt(serverfd,IPPROTO_IP,IP_PKTINFO,&getpktinfo,sizeof(getpktinfo)); + if (bind(serverfd,res->ai_addr ,res->ai_addrlen) < 0) { + fprintf(stderr,"Unable to bind 4011"); + exit(1); + } + + + while (!doexit) { + // use select to wait for the 4011 request packages coming + fd_set fds; + FD_ZERO(&fds); + FD_SET(serverfd, &fds); + struct timeval timeout; + timeout.tv_sec = 30; + timeout.tv_usec = 0; + + int rc; + if ((rc = select(serverfd+1,&fds,0,0, &timeout)) <= 0) { + if (doreload) { + loadcfg(); + fprintf(stderr, "load in select\n"); + } + if (verbose) {syslog(LOG_DEBUG, "reload /var/lib/xcat/proxydhcp.cfg\n");} + continue; + } + + if (doreload) { + loadcfg(); + if (verbose) {syslog(LOG_DEBUG, "reload /var/lib/xcat/proxydhcp.cfg\n");} + } + + pktsize = recvmsg(serverfd,&msg,0); + if (pktsize < 320) { + continue; + } + if (clientpacket[0] != 1 || memcmp(clientpacket+0xec,bootpmagic,4)) { + continue; + } + for (cmsgptr = CMSG_FIRSTHDR(&msg); cmsgptr != NULL; cmsgptr = CMSG_NXTHDR(&msg,cmsgptr)) { + if (cmsgptr->cmsg_level == IPPROTO_IP && cmsgptr->cmsg_type == IP_PKTINFO) { + myip = ((struct in_pktinfo*)(CMSG_DATA(cmsgptr)))->ipi_addr.s_addr; + } + } + + // get the ip of dhcp client + clientip = 0; + int i; + for (i = 0; i< 4; i++) { + clientip = clientip << 8; + clientip += (unsigned char)clientpacket[15-i]; + } + // get the winpe path + struct hostent *host = gethostbyaddr(&clientip, sizeof(clientip), AF_INET); + char *winpepath = defaultwinpe; + if (host) { + if (host->h_name) { + // remove the domain part from hostname + char *place = strstr(host->h_name, "."); + if (place) { + *place = '\0'; + } + + winpepath = getwinpepath(host->h_name); + if (winpepath == NULL) { + winpepath = defaultwinpe; + } + if (verbose) { + sprintf(logmsg, "Received proxydhcp request from %s\n", host->h_name); + syslog(LOG_DEBUG, logmsg); + } + } + } else { + winpepath = defaultwinpe; + } + + // get the Vendor class identifier + char *arch = NULL; + unsigned char *p = clientpacket + 0xf0; + while (*p != 0xff && p < (unsigned char *)clientpacket + pktsize) { + if (*p == 60) { + arch = p + 0x11; + break; + } else { + p += *(p+1) + 2; + } + } + + char winboot[50]; // the bootload of winpe + memset(winboot, 0, 50); + if (0 == memcmp(arch, "00000", 5)) { // bios boot mode + strcpy(winboot, winpepath); + strcat(winboot, "Boot/pxeboot.0"); + } else if (0 == memcmp(arch, "00007", 5)) { // uefi boot mode + strcpy(winboot, winpepath); + strcat(winboot, "Boot/bootmgfw.efi"); + } + + clientpacket[0] = 2; //change to a reply + myip = htonl(myip); //endian neutral change + clientpacket[0x14] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better + clientpacket[0x15] = (myip>>16)&0xff; + clientpacket[0x16] = (myip>>8)&0xff; + clientpacket[0x17] = (myip)&0xff; + txtptr = clientpacket+0x6c; + strncpy(txtptr, winboot ,128); // keeping 128 in there just in case someone changes the string + //strncpy(txtptr,"winboot/new/Boot/bootmgfw.efi",128); // keeping 128 in there just in case someone changes the string + //strncpy(txtptr,"Boot/pxeboot.0",128); // keeping 128 in there just in case someone changes the string + clientpacket[0xf0]=0x35; //DHCP MSG type + clientpacket[0xf1]=0x1; // LEN of 1 + clientpacket[0xf2]=0x5; //DHCP ACK + clientpacket[0xf3]=0x36; //DHCP server identifier + clientpacket[0xf4]=0x4; //DHCP server identifier length + clientpacket[0xf5] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better + clientpacket[0xf6] = (myip>>16)&0xff; + clientpacket[0xf7] = (myip>>8)&0xff; + clientpacket[0xf8] = (myip)&0xff; + + char winBCD[50]; + strcpy(winBCD, winpepath); + strcat(winBCD, "Boot/BCD"); + clientpacket[0xf9] = 0xfc; // dhcp 252 'proxy', but coopeted by bootmgfw, it's actually suggesting the boot config file + clientpacket[0xfa] = strlen(winBCD) + 1; //length of 9 + txtptr = clientpacket+0xfb; + strncpy(txtptr, winBCD, strlen(winBCD)); + clientpacket[0xfa + strlen(winBCD) + 1] = 0; + clientpacket[0xfa + strlen(winBCD) + 2] = 0xff; + sendto(serverfd,clientpacket,pktsize,0,(struct sockaddr*)&clientaddr,sizeof(clientaddr)); + + if (verbose) { + sprintf(logmsg, "Path of bootloader:%s. Path of BCD:%s\n", winboot, winBCD); + syslog(LOG_DEBUG, logmsg); + } + } + + if (verbose) { closelog();} } diff --git a/xCAT-server/lib/xcat/plugins/dhcp.pm b/xCAT-server/lib/xcat/plugins/dhcp.pm index 87d3748d3..33fcb002c 100755 --- a/xCAT-server/lib/xcat/plugins/dhcp.pm +++ b/xCAT-server/lib/xcat/plugins/dhcp.pm @@ -100,6 +100,17 @@ sub check_uefi_support { return 1; } +# check whether the proxydhcp has been enabled. +sub proxydhcp { + my @output = xCAT::Utils->runcmd("ps -C proxydhcp", -1); + if (@output) { + if (grep /proxydhcp/, @output) { + return 1; + } + } + + return 0; +} sub ipIsDynamic { #meant to be v4/v6 agnostic. DHCPv6 however takes some care to allow a dynamic range to overlap static reservations @@ -574,14 +585,18 @@ sub addnode if ($doiscsi and $chainent and $chainent->{currstate} and ($chainent->{currstate} eq 'iscsiboot' or $chainent->{currstate} eq 'boot')) { $lstatements = 'if option client-architecture = 00:00 and not exists gpxe.bus-id { filename = \"xcat/xnba.kpxe\"; } else { filename = \"\"; } '.$lstatements; } else { - #TODO: if windows uefi, do vendor-class-identifier of "PXEClient" to bump it over to proxydhcp.c - if (($douefi == 2 and $chainent->{currstate} =~ /^install/) or $chainent->{currstate} =~ /^winshell/) { #proxy dhcp required in uefi invocation - $lstatements = 'if option user-class-identifier = \"xNBA\" and option client-architecture = 00:00 { always-broadcast on; filename = \"http://'.$nxtsrv.'/tftpboot/xcat/xnba/nodes/'.$node.'\"; } else if option client-architecture = 00:07 or option client-architecture = 00:09 { filename = \"\"; option vendor-class-identifier \"PXEClient\"; } else if option client-architecture = 00:00 { filename = \"xcat/xnba.kpxe\"; } else { filename = \"\"; }'.$lstatements; #Only PXE compliant clients should ever receive xNBA - } elsif ($douefi and $chainent->{currstate} ne "boot" and $chainent->{currstate} ne "iscsiboot") { + # If proxydhcp daemon is enabled for windows deployment, do vendor-class-identifier of "PXEClient" to bump it over to proxydhcp.c + if (($douefi == 2 and $chainent->{currstate} =~ /^install/) or $chainent->{currstate} =~ /^winshell/) { + if (proxydhcp()){ #proxy dhcp required in uefi invocation + $lstatements = 'if option client-architecture = 00:00 or option client-architecture = 00:07 or option client-architecture = 00:09 { filename = \"\"; option vendor-class-identifier \"PXEClient\"; } else { filename = \"\"; }'.$lstatements; #If proxydhcp daemon is enable, use it. + } else { + $lstatements = 'if option user-class-identifier = \"xNBA\" and option client-architecture = 00:00 { always-broadcast on; filename = \"http://'.$nxtsrv.'/tftpboot/xcat/xnba/nodes/'.$node.'\"; } else if option client-architecture = 00:07 or option client-architecture = 00:09 { filename = \"\"; option vendor-class-identifier \"PXEClient\"; } else if option client-architecture = 00:00 { filename = \"xcat/xnba.kpxe\"; } else { filename = \"\"; }'.$lstatements; #Only PXE compliant clients should ever receive xNBA + } + } elsif ($douefi and $chainent->{currstate} ne "boot" and $chainent->{currstate} ne "iscsiboot") { $lstatements = 'if option user-class-identifier = \"xNBA\" and option client-architecture = 00:00 { always-broadcast on; filename = \"http://'.$nxtsrv.'/tftpboot/xcat/xnba/nodes/'.$node.'\"; } else if option user-class-identifier = \"xNBA\" and option client-architecture = 00:09 { filename = \"http://'.$nxtsrv.'/tftpboot/xcat/xnba/nodes/'.$node.'.uefi\"; } else if option client-architecture = 00:07 { filename = \"xcat/xnba.efi\"; } else if option client-architecture = 00:00 { filename = \"xcat/xnba.kpxe\"; } else { filename = \"\"; }'.$lstatements; #Only PXE compliant clients should ever receive xNBA - } else { + } else { $lstatements = 'if option user-class-identifier = \"xNBA\" and option client-architecture = 00:00 { filename = \"http://'.$nxtsrv.'/tftpboot/xcat/xnba/nodes/'.$node.'\"; } else if option client-architecture = 00:00 { filename = \"xcat/xnba.kpxe\"; } else { filename = \"\"; }'.$lstatements; #Only PXE compliant clients should ever receive xNBA - } + } } } #TODO: warn when windows } elsif ($nrent and $nrent->{netboot} and $nrent->{netboot} eq 'pxe' and $lstatements !~ /filename/) { diff --git a/xCAT-server/lib/xcat/plugins/windows.pm b/xCAT-server/lib/xcat/plugins/windows.pm index 820d86b28..c7db3e5b1 100644 --- a/xCAT-server/lib/xcat/plugins/windows.pm +++ b/xCAT-server/lib/xcat/plugins/windows.pm @@ -244,13 +244,15 @@ sub mkinstall my %img_hash=(); my $winimagetab; my $osimagetab; + my $winpepathcfg; # the configuration of winpepath for each node. the format is nodename(50)data(150) + my $dowinpecfg = 0; - unless (-r "$tftpdir/Boot/pxeboot.0" ) { - $callback->( - {error => [ "The Windows netboot image is not created, consult documentation on how to add Windows deployment support to xCAT"],errorcode=>[1] - }); - return; - } + #unless (-r "$tftpdir/Boot/pxeboot.0" ) { + # $callback->( + # {error => [ "The Windows netboot image is not created, consult documentation on how to add Windows deployment support to xCAT"],errorcode=>[1] + # }); + # return; + #} my $xcatsslname=get_server_certname(); unless (-r "$installroot/xcat/ca.pem" and stat("/etc/xcat/cert/ca.pem")->mtime <= stat("$installroot/xcat/ca.pem")->mtime) { mkpath("$installroot/xcat/"); @@ -260,7 +262,13 @@ sub mkinstall # get image attributes my $osents = $ostab->getNodesAttribs(\@nodes, ['profile', 'os', 'arch', 'provmethod']); - + + # get the proxydhcp configuration + if (open (FILE, "; + close(FILE); + } + foreach $node (@nodes) { my $os; @@ -270,6 +278,7 @@ sub mkinstall my $imagename; # set it if running of 'nodeset osimage=xxx' my $partfile; my $installto; + my $winpepath; my $ent = $osents->{$node}->[0]; if ($ent and $ent->{provmethod} and ($ent->{provmethod} ne 'install') and ($ent->{provmethod} ne 'netboot') and ($ent->{provmethod} ne 'statelite')) { @@ -288,7 +297,7 @@ sub mkinstall if (!$winimagetab) { $winimagetab=xCAT::Table->new('winimage', -create=>1); } - my $ref1 = $winimagetab->getAttribs({imagename => $imagename}, 'template', 'installto', 'partitionfile'); + my $ref1 = $winimagetab->getAttribs({imagename => $imagename}, 'template', 'installto', 'partitionfile', 'winpepath'); if ($ref1) { if ($ref1->{'template'}) { $img_hash{$imagename}->{template}=$ref1->{'template'}; @@ -299,6 +308,9 @@ sub mkinstall if ($ref1->{'partitionfile'}) { $img_hash{$imagename}->{partitionfile}=$ref1->{'partitionfile'}; } + if ($ref1->{'winpepath'}) { + $img_hash{$imagename}->{winpepath}=$ref1->{'winpepath'}; + } } } else { $callback->({error => ["The os image $imagename does not exists on the osimage table for $node"], errorcode => [1]}); @@ -313,6 +325,7 @@ sub mkinstall $partfile = $ph->{partitionfile}; $tmplfile = $ph->{template}; $installto = $ph->{installto}; + $winpepath = $ph->{winpepath}; } else { unless ($ent->{os} and $ent->{arch} and $ent->{profile}) { @@ -409,6 +422,36 @@ sub mkinstall next; } + # generate the winpe path configuration file for proxydhcp daemon + if ($winpepath) { + if ($winpepath =~ /^\//) { + $callback->({error =>["The winpepath should be a relative path to /tftpboot/"],errorcode => [1]}); + return; + } + if ($winpepath !~ /\/$/) { + $winpepath .= '/'; + } + } + my $nodename .= pack("a50", $node); + my $winpevalue .= pack("a150", $winpepath); + if ($winpepathcfg =~ /$nodename$winpevalue/) { + ; # do nothing + } elsif ($winpepathcfg =~ /$nodename/) { + $winpepathcfg =~ s/$nodename.{150}/$nodename$winpevalue/; + $dowinpecfg = 1; + } else { + $winpepathcfg .= $nodename; + $winpepathcfg .= $winpevalue; + $dowinpecfg = 1; + } + #} + + # copy bootmgr.exe from winpe path, this is shared by different winpes. + # if it cannot be shared between winpes, we must figure out a fix + if (! -r "$tftpdir/bootmgr.exe") { + copy("$tftpdir/$winpepath/Boot/bootmgr.exe", "$tftpdir/bootmgr.exe"); + } + #Call the Template class to do substitution to produce an unattend.xml file in the autoinst dir my $tmperr; my @utilfiles = ( @@ -440,17 +483,18 @@ sub mkinstall # create the node-specific post script DEPRECATED, don't do #mkpath "/install/postscripts/"; - if (! -r "$tftpdir/Boot/pxeboot.0" ) { + if (! -r "$tftpdir/$winpepath/Boot/pxeboot.0" ) { $callback->( {error => [ "The Windows netboot image is not created, consult documentation on how to add Windows deployment support to xCAT"],errorcode=>[1] }); + return; } elsif (-r $installroot."/$os/$arch/sources/install.wim") { if ($arch =~ /x86/) { $bptab->setNodeAttribs( $node, { - kernel => "Boot/pxeboot.0", + kernel => "$winpepath"."Boot/pxeboot.0", initrd => "", kcmdline => "" } @@ -496,6 +540,8 @@ sub mkinstall $partcfg .= $1; } elsif (/^\[uefi\](.*)/i) { $partcfg .= "[UEFI]$1"; + } elsif (/^\[installto\](.*)/i) { + $installto = $1; } else { $partcfg .= $_; } @@ -571,6 +617,18 @@ sub mkinstall # } # } } + + # generate the winpe path configuration file for proxydhcp daemon + if ($dowinpecfg) { + open (FILE, ">/var/lib/xcat/proxydhcp.cfg"); + print FILE $winpepathcfg; + close (FILE); + + if (open (PDPID, "; + kill 10, $pdpid; + } + } } sub getips { #TODO: all the possible ip addresses my $node = shift; diff --git a/xCAT-server/share/xcat/netboot/windows/fixupunattend.vbs b/xCAT-server/share/xcat/netboot/windows/fixupunattend.vbs index b23a9ad92..ba8f08fad 100644 --- a/xCAT-server/share/xcat/netboot/windows/fixupunattend.vbs +++ b/xCAT-server/share/xcat/netboot/windows/fixupunattend.vbs @@ -73,7 +73,7 @@ Do Until srcfile.AtEndOfStream if partuefi<>"" Then fline = Replace(fline,"==DISKCONFIG==", partuefi) else - fline = Replace(fline,"==DISKCONFIG==","" & instdrv & "true1EFI2602MSR1283Primarytrue") + fline = Replace(fline,"==DISKCONFIG==","" & instdrv & "true1EFI2602MSR1283Primarytrue") end if if instpart<>"0" Then @@ -87,7 +87,7 @@ Do Until srcfile.AtEndOfStream if partbios<>"" Then fline = Replace(fline,"==DISKCONFIG==", partbios) else - fline = Replace(fline,"==DISKCONFIG==", "" & instdrv & "true1Primarytrue") + fline = Replace(fline,"==DISKCONFIG==", "" & instdrv & "true1Primarytrue") end if if instpart<>"0" Then