xcat-core/xCAT-client/bin/db2sqlsetup

#!/usr/bin/env perl
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
#

#-----------------------------------------------------------------------------

=head1   db2sqlsetup 



 This script is called after the installation of DB2 
   on xCAT.  It will automate the setup of the DB2 to run
   xCAT on the IBM DB2 database on AIX and Linux.
   On AIX ( AIX61J - AIX61 TL5(AIX 6.1.5.0)) or later and Linux. 
   As an option it will also setup the ODBC for C/C++ applications
   to be able to use the database.
   It will setup an xcatdb
   database ,a db2instance id, name xcatdb ( same as database), 
   and instance  password to be used in the /etc/xcat/cfgloc file
   to access the database.
   It will interact for the password to assign to the xcatdb 
   for the Unix id and DB2 instance id,
   unless the XCATDB2PW env var is set to the password for the instance id. 
   For Client setup, it will interact for the hostname or ip address
   of the DB2 Server as known by the Service Node, unless the
   XCATDB2SERVER  environement variable is set.
   See man db2setup for more information   
   The script will assume the default install paths of /opt/IBM/db2 for AIX and 
   /opt/ibm/db2 for Linux,  unless overridden with the XCATDB2INSPATH 
   environment variable. 
   The script will assume /var/lib/db2 for the xcat db2 database directory
   unless the 
   DATABASELOC environment variable is set or the site.databaseloc attribute is
   set.  The environment variable should match the
   databaseloc attribute in the site table, but the DATABASELOC environment
   variable will take precedence. DATABASELOC points to the directory that 
   contains the db2 database directory,  so  if DATABASELOC=/db2database then
   the actual location for the db2 database is /db2database/db2.    
   
=cut

BEGIN
{
    $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : '/opt/xcat';
    $::XCATDIR  = $ENV{'XCATDIR'}  ? $ENV{'XCATDIR'}  : '/etc/xcat';
}

# if AIX - make sure we include perl 5.8.2 in INC path.
#       Needed to find perl dependencies shipped in deps tarball.
#    TODO: Remove during FVT should not need because DBD is compiled with
#    5.8.8 and we require 61J or later which runs with 5.8.8 Perl.
if ($^O =~ /^aix/i) {
	unshift(@INC, qw(/usr/opt/perl5/lib/5.8.2/aix-thread-multi /usr/opt/perl5/lib/5.8.2 /usr/opt/perl5/lib/site_perl/5.8.2/aix-thread-multi /usr/opt/perl5/lib/site_perl/5.8.2));
}

use lib "$::XCATROOT/lib/perl";
use DBI;
use xCAT::Utils;
use xCAT::NetworkUtils;
use Getopt::Long;
use xCAT::MsgUtils;
use xCAT::Table;
use Expect;
use Socket;

use strict;

#-----------------------------------------------------------------------------
# Main

$::progname = "db2sqlsetup";
my $args = join ' ', @ARGV;
$::command = "$0 $args";
Getopt::Long::Configure("bundling");
$Getopt::Long::ignorecase = 0;
# parse the options
if (
    !GetOptions(
                'i|init'    => \$::INIT,
                'S|Server'  => \$::SERVER,
                'C|Client'  => \$::CLIENT,
                'N|nostart'      => \$::NOSTART,
                'o|odbc'    => \$::SETUPODBC,
                'h|help'    => \$::HELP,
                'v|version' => \$::VERSION,
                'V|verbose' => \$::VERBOSE,
                'p|passwd' =>  \$::PASSWD,
                'r|rm'      => \$::RM,
    )
  )
{
    &usage;
    exit(1);
}

# display the usage if -h or --help is specified
if ($::HELP)
{
    &usage;
    exit(0);
}

# display the version statement if -v or --version is specified
if ($::VERSION)
{
    my $version = xCAT::Utils->Version();
    xCAT::MsgUtils->message("I", $version);
    exit 0;
}


#
# Get OS
#
if (xCAT::Utils->isAIX())
{
    $::osname = 'AIX';
}
else
{
    $::osname = 'Linux';

    # determine whether redhat or sles
    $::linuxos = xCAT::Utils->osver();
}

# overide the default install path with environment variable
if ($ENV{'XCATDB2INSPATH'})    # input where DB2 is installed
{
    $::installdb2dir = $ENV{'XCATDB2INSPATH'};
}
else
{
    if ($::osname eq 'AIX')
    {
        $::installdb2dir = "/opt/IBM/db2/V9.7";    # default
    }
    else
    {                                              # linux
        $::installdb2dir = "/opt/ibm/db2/V9.7";    # default
    }
}

if ($::RM)
{
	#&remove;
       xCAT::MsgUtils->message("I", "Remove is not currently supported");
	exit(0);
}


if ((!($::INIT)) && (!($::SETUPODBC)) && (!($::PASSWD)))
{
    xCAT::MsgUtils->message("I", "Either -i,-o or -p flag must be chosen");
    &usage;
    exit(1);
}
if (($::NOSTART) && ($::CLIENT))
{
    xCAT::MsgUtils->message("I", "-N is not valid with the -C option. ");
    &usage;
    exit(1);
}
if (($::NOSTART) && (!($::SERVER)))
{
    xCAT::MsgUtils->message("I", "-N must be used with the -S flag. ");
    &usage;
    exit(1);
}
if (($::PASSWD) && ($::VERBOSE))
{
    xCAT::MsgUtils->message("I", "Change password cannot be used with Verbose mode. ");
    &usage;
    exit(1);
}
if ((!($::SERVER)) && (!($::CLIENT))&& (!($::PASSWD)))
{
    xCAT::MsgUtils->message("I", "Either -S, -C, or -p flag must be chosen");
    &usage;
    exit(1);
}
if (($::SERVER) && ($::CLIENT))
{
    xCAT::MsgUtils->message("I", "-S  and -C flag should not be chosen together");
    &usage;
    exit(1);
}

if ((!($::SERVER)) && (!($::CLIENT)) && ($::SETUPODBC))
{
    xCAT::MsgUtils->message("I",
                      "Either -S  or -C flag must be chosen with the -o flag.");
    &usage;
    exit(1);
}

# check to see if only odbc update,  no passwords needed
my $odbconly = 0;
if ((!($::INIT)) && ($::SETUPODBC))
{
    $odbconly = 1;

}


#
# check to see if DB2 is installed, in given location
#
if (!(-e ($::installdb2dir)))
{
    my $message =
      "\nDB2 is not installed. It should be first obtained and installed into $::installdb2dir.";
    xCAT::MsgUtils->message("SE", "$message");
    exit(1);
}

# check to see if the perl DBD for DB2 is installed 
#
my $cmd = "rpm -qa | grep perl-DBD-DB2";
xCAT::Utils->runcmd($cmd, 0);
if ($::RUNCMD_RC != 0)
{
        my $message =
          "\perl-DBD-DB2 is not installed.  It should be first obtained from the xcat dependency tarballs and installed before we can setup DB2";
        xCAT::MsgUtils->message("E", " $cmd failed. $message");
        exit(1);
}

# If setting up the Server, check to see if  DB2  is running
$::db2running     = 0;
$::xcatrunningdb2 = 0; 

# determine the location of the xcatdb instance
#
$::databaseloc            = "/var/lib/db2";    # database location default
$::databaselocdir         = "/var/lib";       # database path 
# if database location environment variable is set, use it
if ($ENV{'DATABASELOC'})    # input where xcatdb is located  
{
    $::databaseloc = $ENV{'DATABASELOC'};
    $::databaselocdir = $ENV{'DATABASELOC'};
    $::databaseloc .="\/db2";
} else { # use site.databaseloc if set
  if (!($::NOSTART)) {
    my $cmd = " XCATBYPASS=1  tabdump site | grep databaseloc";
    my @output = xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC == 0)    # if there 
    {
       (my $attr, my $db) = split(",", $output[0]);
       (my $q, $::databaseloc) = split("\"", $db);
       $::databaselocdir = $::databaseloc;
       $::databaseloc .="\/db2";
   
    }
  }
}


# If not NOSTART where we are setting up DB2 before xCAT is installed. 
# check that they have not defined the databaseloc under the site.installoc 
# directory, default /install.  This is invalid because this directory
# is usually mounted on the Service Nodes.  Error out if they do
# this is really the attribute in installdir which I will check. 
if (!($::NOSTART)){
  my @installlocdir;
  my $cmd = " XCATBYPASS=1  tabdump site | grep installdir";
  my @installlocation = xCAT::Utils->runcmd($cmd, -1);
  if ($::RUNCMD_RC == 0)   
  {
   (my $attr, my $installoc) = split(",", $installlocation[0]);
   (my $q,my $installpt) = split("\"", $installoc);  # remove quotes
   @installlocdir = split '/', $installpt;  # get the base directory

  } else { 
     $installlocdir[1] = "install";   # default
  }
  
  # is it the same as the first directory in databaseloc
  my @dblocdir = split '/', $::databaselocdir;  # get the base directory
  $installlocdir[1] =~ s/\s*//g; #remove blanks
  $dblocdir[1] =~ s/\s*//g; #remove blanks
  if ($installlocdir[1] eq $dblocdir[1] ) { # if they match,error
       xCAT::MsgUtils->message("E", "The site databaseloc  attribute is set to the directory or a sub-directory of the site table installloc or installdir attribute or the default of /install.  This is not a supported configuration.");
       exit(1);
  }
}
if (!(-e $::databaselocdir)){ # if it does not exist, create it
   my $cmd = "mkdir -p $::databaselocdir";
   xCAT::Utils->runcmd($cmd, 0);
   if ($::RUNCMD_RC != 0)
   {
       xCAT::MsgUtils->message("E", " $cmd failed.");
       exit(1);
   }
}
# if we are on the MN ( db2 server) 
if ($::SERVER)
{
    my $cmd = "ps -ef | grep db2";
    my @output = xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC == 0)    # already running
    {
        my $db2check = "db2agent";    # see if really running
        if (grep(/$db2check/, @output))
        {

            if ($::INIT)
            {
                my $message =
                  "DB2 is running.  Database initialization will not take place.";
                xCAT::MsgUtils->message("I", "$message");
            }
            $::db2running = 1;
        }
    }
    if (-e ("/etc/xcat/cfgloc"))    # check to see if xcat is using DB2 already
    {                               # cfgloc exists
        $cmd = "fgrep DB2 /etc/xcat/cfgloc";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC == 0)
        {
            if ($::INIT)
            {
                my $message =
                  "The /etc/xcat/cfgloc file is already configured for DB2. xCAT appears to be already running on DB2.  xcat database configuration will not take place.";
                xCAT::MsgUtils->message("I", "$message");
            }
            $::xcatrunningdb2 = 1;
        }
    }
}

#  if not just odbc update  and xcat MN is not already running on DB2
#   or if we are setting up the  Client and not just the ODBC 
#   or change password
#   then Get  instance password
#
if ((($odbconly == 0) && ($::xcatrunningdb2 == 0)) || (($::CLIENT) && ($odbconly == 0)) || ($::PASSWD))
{
    if ($ENV{'XCATDB2PW'})    # passwd supplied
    {
        $::adminpassword = $ENV{'XCATDB2PW'};
    }
    else
    {                         #prompt for password

        my $msg = "Enter the password for xcatdb instance id: ";
        xCAT::MsgUtils->message('I', "$msg");
        `stty -echo`;
        chop($::adminpassword = <STDIN>);
        `stty echo`;
        $msg = "Retype the password for xcatdb instance id: ";
        xCAT::MsgUtils->message('I', "$msg");
        `stty -echo`;
        chop(my $adminpwd2 = <STDIN>);
        `stty echo`;
        if ($::adminpassword ne $adminpwd2) { # no match
            $msg = "Sorry, passwords do not match. ";
             xCAT::MsgUtils->message('I', "$msg");
             exit 1;
        }
    }
}

# if we are just changing the password for the instance
#  do it and exit
if ($::PASSWD) {
  my $rc=0;
  $rc=&updatepasswd;
  exit $rc;
}

# initial setup request and not already running db2
if (($::INIT) && ($::xcatrunningdb2 == 0))
{
    if (($::SERVER) && (!($::NOSTART))) 
    {    # setting up db2 server on the MN and not nostart option  

        # makesure the daemon is running 
        &startxcatd;
        #
        # Backup current database
        #
        my $homedir = xCAT::Utils->getHomeDir();
        $::backupdir = $homedir;
        if ($::osname eq 'AIX')
        {
            $::backupdir .= "xcat-dbback";
        }
        else
        {
            $::backupdir .= "/xcat-dbback";
        }

        &backupxcatdb;
        # shutdown the xcatd daemon while migrating 
        &shutdownxcatd;

        #
        #  Get MN name from site.master in backed up database
        # if that does not exist use resolved hostname
        # double check site.master for resolution
        my $sitefile = "$::backupdir/site.csv";
        my $cmd      = "grep master $sitefile";
        my @output   = xCAT::Utils->runcmd($cmd, -1);
        my $hname;
        if ($::RUNCMD_RC != 0)    # no entry in site table
        {
            $hname = `hostname`;
            chomp $hname;
        }
        else                      # from site.master
        {
            (my $attr, my $master) = split(",", $output[0]);
            (my $q, $hname) = split("\"", $master);
            chomp $hname;

        }

        my $ipaddr = xCAT::NetworkUtils->getipaddr($hname);
        if ($ipaddr)
        {
            $::MN = $ipaddr;
        }
        else
        {
            xCAT::MsgUtils->message("E",
                                    "Hostname resolution for $hname failed.");
            &startxcatd;
            exit(1);
        }
    }    # end setting up SERVER

    # DB2 not running, or setting up Client, continue setting up DB2
    if (($::db2running == 0) || ($::CLIENT))
    {

        # Add DB2 user and group and xcatdb instance for AIX/Linux
        &mkdb2user;

        # Setup /etc/services
        &setupservices;

        # Setup the xcatdb instance
        &setupinstance;

        #
        # Setup DB2 env variables
        #
        &setupdb2env;

        #
        # Start DB2 server
        #
        if ($::SERVER)
        {
            &db2start;

          #
          # Setup DB2 to restart on reboot  
          #
          &db2reboot;
        }

    }

    # On server, xcat not already configured to run DB2 add xCAT database
    if (($::SERVER) && ($::xcatrunningdb2 == 0))
    {
        #
        # update DBM config 
        #
        &updateDBM;

        #
        # Create the xcatdb database
        #
        &createxcatdb;

        #
        # create cfgloc file
        #
        &createcfgloc;
    }

    # if setting up Client catalog the MN (db2 server address)
    # and create /etc/xcat/cfgloc
    if ($::CLIENT)
    {
        &catalogServer;
        &createcfgloc;
    }
    # add paths to db2 code to roots path.  Need this for LL, but it is
    # convenient
    &adddb2paths;

    #
    # Restore backed up database into DB2
    #
    if ($::SERVER)
    {
       if ($::xcatrunningdb2 == 0) # if not already running on db2
       {
        if (!($::NOSTART)){
          &restorexcatdb;
        }
       }

        if ($::NOSTART) {
          xCAT::MsgUtils->message("I",
                                "xCAT DB2 database is setup.\n");
        } else {
          xCAT::MsgUtils->message("I",
                                "xCAT is  running on the DB2 database.\n");
        }
       # add cron entry for table reorg
       &updatecrontab;

    }
    else  # client
    {
        #
        # start the daemon
        #
        &startxcatd;
        xCAT::MsgUtils->message("SI", "xCAT DB2 Client setup is complete.\n");
    }
}    # end initialization

if ($::SETUPODBC)
{
    # add paths to db2 code to roots path.  Need this for LL, but it is
    # convenient
    &adddb2paths;

    #
    #  set up the ODBC on the Management Node
    #

    &setupODBC;

}


exit;

#####################################
#  subroutines
#####################################

#-----------------------------------------------------------------------------

=head3    usage 
	
	Displays message for -h option

=cut

#-----------------------------------------------------------------------------

sub usage
{
    xCAT::MsgUtils->message(
        'I',
        "Usage:\ndb2sqlsetup - Performs the setup of IBM DB2 for xCAT to use as its database. See man db2sqlsetup for more information."
        );
  my $msg=
      "db2sqlsetup <-h|--help>\n           <-v|--version>\n           <-i|--init> <-S|-C> [-N|--nostart] [-o|--setupODBC] [-V|--verbose]\n           <-o|--setupODBC> <-S|-C> [-V|--verbose]\n           <-p|--passwd> [-S|-C]\n ";

    xCAT::MsgUtils->message('I', "$msg");
}
#-----------------------------------------------------------------------------

=head3    startxcatd 
	
  start the daemon 

=cut

#-----------------------------------------------------------------------------

sub startxcatd 

{
   my $xcmd;
   if ($::osname eq 'AIX')
   {
      if ($ENV{'XCATDB2QUIET'} == 1){    # don't show errors
        $xcmd = "$::XCATROOT/sbin/restartxcatd >/dev/null 2>&1";
      } else {
        $xcmd = "$::XCATROOT/sbin/restartxcatd";
      }

   }
   else
   {
     $xcmd = "service xcatd restart";
   }
   system($xcmd);
}

#-----------------------------------------------------------------------------

=head3    shutdownxcatd 
	
  shutdown the daemon 

=cut

#-----------------------------------------------------------------------------

sub shutdownxcatd

{
    my $msg = "Shutting down the xcatd daemon during database migration.";
    xCAT::MsgUtils->message('I', "$msg");
    my $xcmd;
    if ($::osname eq 'AIX')
    {
        $xcmd = "stopsrc -s xcatd";

    }
    else
    {
        $xcmd = "service xcatd stop";
    }
    system($xcmd);
}

#-----------------------------------------------------------------------------

=head3    backupxcatdb 
	
   Backup xCATdb 

=cut

#-----------------------------------------------------------------------------

sub backupxcatdb

{


        xCAT::MsgUtils->message(
            "I",
            "Backing up xCAT Database to $::backupdir.\nThis could take several minutes."
            );
        if (!(-e $::backupdir))
        {    # does not exist, make it
            my $cmd = "mkdir -p $::backupdir";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("E", " $cmd failed.");
                exit(1);
            }
        }
        else
        {    # remove contents

            my $cmd = "rm -rf $::backupdir/*";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("E", " $cmd failed.");
                exit(1);
            }
        }

        # back it up
        my $cmd = " dumpxCATdb -p $::backupdir";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            xCAT::MsgUtils->message("E", " $cmd failed.");
            exit(1);
        }

}

#-----------------------------------------------------------------------------

=head3  mkdb2user 
	
         adds db2instance user and group and xcatdb instance id 
=cut

#-----------------------------------------------------------------------------

sub mkdb2user
{

    #
    # mk db2 instance group and user
    #

    my $cmd;
    my $makeuser;
    if ($::osname eq 'AIX')
    {
        $cmd = "lsuser xcatdb";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {
          $makeuser =1;  # user does not exist
        } else {   # user exists but check to see if home directory exist
            my $homedir = xCAT::Utils->getHomeDir("xcatdb");
            if (!(-e $homedir)) { # if it does not exist
              $cmd = "rmuser xcatdb";  # we need to remake the user
              xCAT::Utils->runcmd($cmd, 0);
              if ($::RUNCMD_RC != 0)
              {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
              }
              $makeuser =1;  
              
            } else { # user ok , home dir ok
              $makeuser =0;  
            }
        }
        if ($makeuser ==1) {
           $cmd = "lsgroup xcatdb";
           xCAT::Utils->runcmd($cmd, -1);
           if ($::RUNCMD_RC != 0)
           {

              #group does not exist, need to make it
              $cmd = "mkgroup xcatdb";
              xCAT::Utils->runcmd($cmd, 0);
              if ($::RUNCMD_RC != 0)
              {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
              }
            }
            $cmd = "mkuser pgrp=xcatdb home=$::databaseloc shell=/bin/ksh xcatdb";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }
            # touch .profile to makesure it stays owned by xcatd
            $cmd = "touch $::databaseloc/.profile";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }
            $cmd = "chmod 777 $::databaseloc/.profile";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }

        }

        # set xcatdb id password
        my $verboseflg=0;
        if ($::VERBOSE) {   # do not show commands with password
          $verboseflg=1;
          $::VERBOSE=undef;
        }
        $cmd = qq~echo "xcatdb:$::adminpassword" | /bin/chpasswd -c~;
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {

            xCAT::MsgUtils->message("SE", " $cmd failed.");
            exit(1);
        }
        if ($verboseflg == 1) {
          $::VERBOSE=1;
        }
    }
    else
    {    # Linux

        $cmd = "egrep -i \"^xcatdb:\" /etc/passwd";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {
          $makeuser =1;  # user does not exist
        } else {   # user exists but check to see if home directory exist
            my $homedir = xCAT::Utils->getHomeDir("xcatdb");
            if (!(-e $homedir)) { # if it does not exist
              $cmd = "userdel xcatdb";  # we need to remake the user
              xCAT::Utils->runcmd($cmd, 0);
              if ($::RUNCMD_RC != 0)
              {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
              }
              $makeuser =1;  # user does not exist
              
            } else { # user ok , home dir ok
              $makeuser =0;  
            }
        }
        if ($makeuser ==1) {
          $cmd = "egrep -i \"^xcatdb:\" /etc/group";
          xCAT::Utils->runcmd($cmd, -1);
          if ($::RUNCMD_RC != 0)
          {

            #group does not exist, need to make it
            $cmd = "groupadd  xcatdb";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }
          }

          #user does not exist, need to make it
            $cmd = "useradd -d $::databaseloc -g xcatdb -m -s /bin/bash xcatdb";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }

        }

        # set xcatdb id password
        my $verboseflg=0;
        if ($::VERBOSE) {   # do not show commands with password
          $verboseflg=1;
          $::VERBOSE=undef;
        }
        $cmd = qq~echo $::adminpassword | passwd xcatdb --stdin~;
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {

            xCAT::MsgUtils->message("SE", " $cmd failed.");
            exit(1);
        }
        if ($verboseflg == 1) {
          $::VERBOSE=1;
        }
    }

}

#-----------------------------------------------------------------------------

=head3   setupservices   

	
  add db2 xcatdb instance entries into /etc/services on Server or Client 
  

=cut

#-----------------------------------------------------------------------------
sub setupservices
{
    my $cmd;
    $cmd = "egrep -i \"^db2c_xcatdb\" /etc/services";
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)
    {    # if not already there
        open(FILE, ">>/etc/services")
          or die "cannot open file /etc/services\n";
        if ($::SERVER)
        {    # on the server
            print FILE "# xcatdb db2 entries
DB2_xcatdb      60000/tcp
DB2_xcatdb_1    60001/tcp
DB2_xcatdb_2    60002/tcp
DB2_xcatdb_END  60003/tcp
db2c_xcatdb     50001/tcp    # Port for server connection";
        }
        else
        {    # on the client
            print FILE "# xcatdb db2 entries
db2c_xcatdb     50001/tcp    # Port for server connection";
        }
        close FILE;
    }

}

#-----------------------------------------------------------------------------

=head3   setupinstance   

	
 Create the db2 server or client instance 
 For server
 run <db2installpath>/instance/db2icrt -a server -p db2c_xcatdb -u xcatdb xcatdb 
 For Client
 run <db2installpath>/instance/db2icrt -s client xcatdb 


=cut

#-----------------------------------------------------------------------------

sub setupinstance
{
    my $rc = 0;

    #check if instance already exists
    my $cmd = $::installdb2dir;
    $cmd .= "\/instance\/db2ilist ";
    my @output = xCAT::Utils->runcmd($cmd, 0);
    my $check = "xcatdb";    # see if instance exists
    if (!(grep(/$check/, @output)))
    {

        # if xcatdb instance does not exist, setup
        $cmd = $::installdb2dir;    # set db2 path to the create instance cmd
        $cmd .= "\/instance\/db2icrt ";
        if ($::SERVER)
        {

            $cmd .= "-a server -p db2c_xcatdb -u xcatdb xcatdb ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {                       # if error exit
                xCAT::MsgUtils->message("E", " $cmd failed.");
                # start the daemon
                &startxcatd;
                exit(1);
    
            }

            # setup instance
            $cmd = $::installdb2dir;    #
            $cmd .= "\/instance\/db2iset ";
            $cmd .= "-g DB2_PARALLEL_IO=* ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("E", " $cmd failed.");
            }
            $cmd = $::installdb2dir;
            $cmd .= "\/instance\/db2iset ";
            $cmd .= "-g DB2AUTOSTART=yes ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("E", " $cmd failed.");
            }
            $cmd = $::installdb2dir;
            $cmd .= "\/instance\/db2iset ";
            $cmd .= "-g DB2_STRIPED_CONTAINERS=ON ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("E", " $cmd failed.");
            }

            $cmd = "echo \"EXTSHM=ON\" >> $::databaseloc/sqllib/db2profile ";
            xCAT::Utils->runcmd($cmd,0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("I", " $cmd warning.");
            }
            $cmd = "echo \"export EXTSHM\" >> $::databaseloc/sqllib/db2profile ";
            xCAT::Utils->runcmd($cmd,0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("I", " $cmd warning.");
            }

        }
        else
        {    # client setup
            $cmd .= "-s client xcatdb ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {    # if error exit
                xCAT::MsgUtils->message("SE", " $cmd failed.");
                exit(1);
            }
            $cmd = "echo \"EXTSHM=ON\" >> $::databaseloc/sqllib/db2profile ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SI", " $cmd warning.");
            }
            $cmd = "echo \"export EXTSHM\" >> $::databaseloc/sqllib/db2profile ";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("I", " $cmd warning.");
            }

        }
    }
    # for either client or server update
    # su to xcatdb and run more setup
    $cmd = "export EXTSHM=ON ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
      xCAT::MsgUtils->message("SI", " $cmd warning.");
    }
    $cmd = "db2set DB2ENVLIST=EXTSHM  ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
      xCAT::MsgUtils->message("SI", " $cmd warning.");
    }
    
}

#-----------------------------------------------------------------------------

=head3   rundb2cmd  

	
  Run a commmand as the xcatdb instance id 
  Input: command 

=cut

#-----------------------------------------------------------------------------
sub rundb2cmd
{
    my $orgcmd = shift;
    my $rc     = 0;
    my $cmd    = "\'";
    $cmd .= $orgcmd;
    $cmd .= ' 2>&1';
    $cmd .= "\'";
    system("su - xcatdb -c $cmd");
    if ($? > 0)    # error
    {
        $rc = $? >> 8;
    }
    return ($rc);
}

#-----------------------------------------------------------------------------

=head3   setupdb2env  

	
  Setup the db2 environment variables and libpaths

=cut

#-----------------------------------------------------------------------------
sub setupdb2env

{
    if ($::osname eq 'AIX')
    {
        my $cmd = "egrep -i \"DB2INSTANCE\" /etc/profile";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {    # if not already there
            open(FILE, ">>/etc/profile")
              or die "cannot open file /etc/profile\n";
            print FILE "export DB2INSTANCE=xcatdb \n";
            print FILE "export EXTSHM=ON \n";
            close FILE;
        }

    }
    else
    {        # LInux
        my $cmd = "egrep -i \"DB2INSTANCE\" /etc/profile.d/xcatdb2.sh";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {    # if not already there
            open(FILE, ">>/etc/profile.d/xcatdb2.sh")
              or die "cannot open file /etc/profile.d/xcatdb2.sh\n";
            print FILE "export DB2INSTANCE=xcatdb \n";
            print FILE "export EXTSHM=ON \n";
            close FILE;
        }
        my $cmd = "egrep -i \"DB2INSTANCE\" /etc/profile.d/xcatdb2.csh";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {    # if not already there
            open(FILE, ">>/etc/profile.d/xcatdb2.csh")
              or die "cannot open file /etc/profile.d/xcatdb2.csh\n";
            print FILE "setenv DB2INSTANCE \"xcatdb\" \n";
            print FILE "setenv EXTSHM \"ON\" \n";
            close FILE;

        }
        $cmd = "chmod 755 /etc/profile.d/xcatdb2.sh";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
        }
        $cmd = "chmod 755 /etc/profile.d/xcatdb2.csh";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
        }
        my $path = $::installdb2dir;
        $path .="\/lib64";
        # add path of db2 libraries to ld.so.conf
        my $cmd = "egrep -i \"V9.7\" /etc/ld.so.conf";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {    # if not already there
            open(FILE, ">>/etc/ld.so.conf")
              or die "cannot open file /etc/ld.so.conf\n";
            print FILE "$path\n";
            close FILE;
            $cmd = "ldconfig";
            xCAT::Utils->runcmd($cmd);

        }

    }
}

#-----------------------------------------------------------------------------

=head3   db2start 

	
    Start the db2 server 

=cut

#-----------------------------------------------------------------------------

sub db2start
{
    # check to see if xcatdb instance is already running
    my $cmd = "ps -ef | grep xcatdb";
    my @output = xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC == 0)    # already running
    {
        my $db2check = "db2sysc";    # see if really running
        if (grep(/$db2check/, @output))
        {
          return;
        }
    }
    xCAT::MsgUtils->message("I", "Starting the DB2 Server");
    my $cmd;

    # su to xcatdb to start the server
    $cmd = "db2start ";
    my $rc = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        #sleep and try one more time
        xCAT::MsgUtils->message("W", " $cmd failed. Will retry.");
        sleep 20;
        $rc = &rundb2cmd($cmd);
        if ($rc != 0) {
          xCAT::MsgUtils->message("W", " $cmd failed.");
          &startxcatd;
          exit(1);
        }
    }

}

#-----------------------------------------------------------------------------

=head3   catalogServer 

	
   Catalog the location of the db2 server on the Service Node 

=cut

#-----------------------------------------------------------------------------

sub catalogServer
{
    xCAT::MsgUtils->message("I", "Cataloging the DB2 Server");
    my $MN;
    if ($ENV{'XCATDB2SERVER'})
    {    # hostname or ip address supplied
        $MN = $ENV{'XCATDB2SERVER'};
    }
    else
    {
        my $msg =
          "Input the hostname or ip address of the Management Node as known by this Service node.  Should be the same as the site.master attribute: ";

        xCAT::MsgUtils->message('I', "$msg");
        chop($MN = <STDIN>);
    }
    my $cmd;
    my $rc = 0;

    # su to xcatdb and catalog the database server and database
    $cmd = "db2 catalog tcpip node mn  remote $MN server db2c_xcatdb  ";
    $rc  = &rundb2cmd($cmd);
    $cmd = "db2 terminate";                                  # refresh the cache
    $rc  = &rundb2cmd($cmd);
    $cmd = "db2 catalog db xcatdb  as xcatdb at node mn  ";
    $rc  = &rundb2cmd($cmd);
    $cmd = "db2 terminate";                                  # refresh the cache
    $rc  = &rundb2cmd($cmd);

}
#-----------------------------------------------------------------------------

=head3   updateDBM 

	
   Setup configuration requirements for the DBM 

=cut

#-----------------------------------------------------------------------------

sub updateDBM 
{
    xCAT::MsgUtils->message("I",
                 "Updating the DBM.");
    my $cmd;
    my $rc = 0;

    # su to xcatdb to update the DBM 
    $cmd = "db2 -tvf  /opt/xcat/share/xcat/scripts/updateDBM.sql ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("I", " $cmd warning.");
    }


}

#-----------------------------------------------------------------------------

=head3   createxcatdb 

	
   Create the xcat database 

=cut

#-----------------------------------------------------------------------------

sub createxcatdb
{
    xCAT::MsgUtils->message("I",
                 "Creating the xCAT database. This can take several minutes.");
    my $cmd;
    my $rc = 0;
    # need to make sure the createdb.sql script if pointing to the 
    # correct databaseloc,  the default is /var/lib/db2 in the shipped
    # script but this may have been changed by the admin
    # two lines are affected
    #   Create tablespace xcattbs16k pagesize 16k managed by system using
    #('/var/lib/db2 /ts16')  BUFFERPOOL BP16K;
    #Create tablespace xcattbs32k pagesize 32k managed by system using
    #  ('/var/lib/db2 /ts32')  BUFFERPOOL BP32K;
    my $createdb       = "/opt/xcat/share/xcat/scripts/createdb.sql";
    my $createdborg = "/opt/xcat/share/xcat/scripts/createdb.sql.org";
    my $createdbtmp = "/opt/xcat/share/xcat/scripts/createdb.sql.tmp";
    my $cmd;
    my $message;
    if (!(-e $createdborg)) {
      $cmd = "cp $createdb $createdborg";
      xCAT::Utils->runcmd($cmd, 0);
      if ($::RUNCMD_RC != 0)
      {
            xCAT::MsgUtils->message("E", " $cmd failed.");
            exit 1;
      }
    }
    # rm tmp file
    $cmd = "rm $createdbtmp";  # rm tmp file, ignore errors
    xCAT::Utils->runcmd($cmd, -1);
    $cmd = "touch $createdbtmp";
    xCAT::Utils->runcmd($cmd,0 );
    # now read the orginal file and build the tmp file with the correct info
    open (CREATEDB," < $createdb");
    foreach my $line (<CREATEDB>) 
    {
     chop $line;
     if ($line =~ /^Create tablespace/i) {  # line to change
      my $newline;
       if ($line =~ /xcattbs16k/i) {
         $newline="Create tablespace xcattbs16k pagesize 16k managed by system using('$::databaseloc/ts16') BUFFERPOOL BP16K;";
         $cmd="echo \"$newline\" >> $createdbtmp"
       } else {
         $newline="Create tablespace xcattbs32k pagesize 32k managed by system using('$::databaseloc/ts32') BUFFERPOOL BP32K;";
         $cmd="echo \"$newline\" >> $createdbtmp"
       }
     } else { # just put line in new file
       $cmd="echo \"$line\" >> $createdbtmp"
     }
     xCAT::Utils->runcmd($cmd, 0);
     if ($::RUNCMD_RC != 0) {
        xCAT::MsgUtils->message("E", " $cmd failed. Could not build createdb.sql");
        exit 1;
     }
    }
    close CREATEDB;
    # copy tmp back to createdb.sql
    $cmd = "cp $createdbtmp $createdb";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
            xCAT::MsgUtils->message("E", " $cmd failed.");
            exit 1;
    }


    # su to xcatdb to create the database
    $cmd = "db2 -tvf  /opt/xcat/share/xcat/scripts/createdb.sql ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("I", " $cmd warning.");
    }

    # restart the instance to apply the change
    xCAT::MsgUtils->message("I",
             "Database created. Restarting the instance to apply the change. ");
    $cmd = "db2 connect reset ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("I", " $cmd warning.");
    }
    $cmd = "db2 force applications all; db2 terminate; ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("I", " $cmd warning.");
    }
    $cmd = "db2stop ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("E", " $cmd warning.");
        exit(1);
    }
    $cmd = "db2start ";
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("E", " $cmd warning.");
        exit(1);
    }

}

#-----------------------------------------------------------------------------

=head3   db2reboot 

	
    Setup for db2 to start on reboot  

=cut

#-----------------------------------------------------------------------------

sub db2reboot
{
    xCAT::MsgUtils->message("I", "Setting up DB2 to start on reboot");
    my $cmd;

    # su to xcatdb 
    $cmd = "db2iauto -on xcatdb ";
    my $rc = &rundb2cmd($cmd);
    if ($rc != 0)
    {
        xCAT::MsgUtils->message("W", " $cmd failed.");

    }
    # root needs to run the command also
    $cmd = $::installdb2dir;
    $cmd .= "\/bin\/db2iauto -on xcatdb ";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {                       # if error exit
       xCAT::MsgUtils->message("W", " $cmd failed.");
    
    }
    # For redhat 6 need to setup upstart for reboot until DB2 does
    # DB2 will shipped this with 9.7  later PTF
    # check to see DB2 has not already implemented a script in /etc/init
    my $osver=xCAT::Utils->osver;
    if ($osver eq 'rhserver6') {
      # see if left over /etc/init.d/db2xcat then remove it. This was put in
      # by  xcat db2sqlsetup script in the past
      if (-e("/etc/init.d/db2xcat")) {
         $cmd = "chkconfig --del db2xcat";
          xCAT::Utils->runcmd($cmd, 0);
          if ($::RUNCMD_RC != 0)
          {
            xCAT::MsgUtils->message("E", " $cmd failed.");

          }
          $cmd = "rm /etc/init.d/db2xcat";
          xCAT::Utils->runcmd($cmd, 0);
          if ($::RUNCMD_RC != 0)
          {
            xCAT::MsgUtils->message("E", " $cmd failed.");

          }
      
      }     
      $cmd = " fgrep db2fmcd /etc/init/*";
      xCAT::Utils->runcmd($cmd, -1);
      if ($::RUNCMD_RC == 0) {
         my $message = "DB2 /etc/init reboot file already setup";
         xCAT::MsgUtils->message("I", "$message");
      } else {
        $cmd = "cp /opt/xcat/share/xcat/scripts/xcatfmcd.conf /etc/init/xcatfmcd.conf";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            xCAT::MsgUtils->message("E", " $cmd failed. DB2 will not automatical
ly restart on reboot.");
        } 
      }
    }  # end Redhat6


    # setup for any Linux shmmax attribute 
    if ($::osname eq 'Linux') {
      # add setup required for DB2 reboot
      $cmd = " fgrep \"kernel.shmmax = 268435456\" /etc/sysctl.conf";
      xCAT::Utils->runcmd($cmd, -1); # entry not there
      if ($::RUNCMD_RC != 0) {
         $cmd = "echo \"#xcat setup\" >> /etc/sysctl.conf ";
         xCAT::Utils->runcmd($cmd,0);
         if ($::RUNCMD_RC != 0)
         {
            xCAT::MsgUtils->message("I", " $cmd failed.");
         }
         $cmd = "echo \"kernel.shmmax = 268435456\" >> /etc/sysctl.conf ";
         xCAT::Utils->runcmd($cmd,0);
         if ($::RUNCMD_RC != 0)
         {
            xCAT::MsgUtils->message("I", " $cmd failed. DB2 will not automatically restart on reboot.");
         }
      }
   }
  
        
    
}

#-----------------------------------------------------------------------------

=head3   setupODBC 
	
         Will setup the ODBC.  C++ applications are running
		 that need access to the DB2 database for example LoadLeveler.

=cut

#-----------------------------------------------------------------------------

sub setupODBC

{

    #
    # check to see if correct rpms are installed
    #
    # for all OS need unixODBC rpm
    my $cmd = "rpm -qa | grep unixODBC";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
        my $message =
          "\nunixODBC is not installed.  If on AIX, it should be first obtained from the xcat dependency tarballs and installed before we can setup the ODBC. If on Linux, install from the OS CDs. If Redhat and ppc is being used then both unixODBC.*.ppc64 and unixODBC.*.ppc should be installed. ";
        xCAT::MsgUtils->message("E", " $cmd failed. $message");
        exit(1);
    }
    # For CNM you  must have the 32 bit version on Unix ODBC, Pam, 
    # and openssl installed on Redhat.   Put out a warning.
    if ($::linuxos =~ /rh.*/) {
      $cmd = "rpm -qa | grep unixODBC";
      my @output=xCAT::Utils->runcmd($cmd, 0);
      # check for two lines one ppc and one ppc64
      my $foundppc64 =0;
      my $foundppc =0;
      foreach my $line (@output)  {
        if ($line =~ /\.ppc$/i) {
         $foundppc=1;
        }
        if ($line =~ /\.ppc64$/i) {
         $foundppc64=1;
        }
      }
      if (($foundppc64 !=1) || ($foundppc != 1))
      {
        my $message =
          "If Redhat on power is being used then both unixODBC.*.ppc64 and unixODBC.*.ppc rpms must be installed. ";
        xCAT::MsgUtils->message("I", "$message");
    
      }
      # check pam 32 and 64 bit installed
      @output=();
      $cmd = "rpm -qa | grep \^pam-";
      @output=xCAT::Utils->runcmd($cmd, 0);
      # check for two lines one ppc and one ppc64
      $foundppc64 =0;
      $foundppc =0;
      foreach my $line (@output)  {
        if ($line =~ /\.ppc$/i) {
         $foundppc=1;
        }
        if ($line =~ /\.ppc64$/i) {
         $foundppc64=1;
        }
      }
      if (($foundppc64 !=1) || ($foundppc != 1))
      {
        my $message =
          "If Redhat on power is being used then both pam-*.ppc64 and pam-*.ppc rpms must be installed. ";
        xCAT::MsgUtils->message("I", "$message");
    
       }
      # check openssl 32 and 64 bit installed
      @output=();
      $cmd = "rpm -qa | grep \^openssl-";
      @output=xCAT::Utils->runcmd($cmd, 0);
      # check for two lines one ppc and one ppc64
      $foundppc64 =0;
      $foundppc =0;
      foreach my $line (@output)  {
        if ($line =~ /\.ppc$/i) {
         $foundppc=1;
        }
        if ($line =~ /\.ppc64$/i) {
         $foundppc64=1;
        }
      }
      if (($foundppc64 !=1) || ($foundppc != 1))
      {
        my $message =
          "If Redhat on power is being used then both openssl*.ppc64 and openssl*.ppc rpms must be installed. ";
        xCAT::MsgUtils->message("I", "$message");
    
       }
    }




    my @rpmoutput;
    my $odbcinstfile;
    my $odbcfile;
    my $message;

    my $homedir          = xCAT::Utils->getHomeDir();
    my $xcatconfig       = "/etc/xcat/cfgloc";
    my $xcatconfigbackup = "/etc/xcat/cfgloc.db2";
    if (!(-e ($xcatconfig)) && (!(-e ($xcatconfigbackup))))
    {
        $message =
          "The $xcatconfig and $xcatconfigbackup files are missing. You need to configure xCAT for DB2 before setting up the ODBC.";
        xCAT::MsgUtils->message("E", "$message");
        exit(1);

    }
    $cmd = "fgrep -i  DB2 $xcatconfig";
    my @output;
    @output = xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)    # then try backup
    {
        $cmd = "fgrep -i DB2 $xcatconfigbackup";
        @output = xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)    # then try backup
        {
            $message =
              "Cannot find DB2 info in the cfgloc or cfgloc.db2 file. Configuration of ODBC cannot continue.";
            xCAT::MsgUtils->message("E", " $cmd failed. $message");
            exit(1);
        }
    }

    # instance, database and password from cfgloc
    (my $databasehdr, my $instance, my $passwd) = split(/\|/, $output[0]);
    (my $header, my $database) = split(/:/, $databasehdr);

    # The unixODBC Driver Manager loads the DB2 Driver dynamically
    # so the shared object must be extracted from the driver
    if  ($::osname eq 'AIX')
    {
        if (!(-e "$::databaseloc/sqllib/lib/libdb2.so"))
        {
            $cmd = "touch db2sql.test"; # see if this is a writable directory
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                my $message = "You are not in a writable directory. To run this command change to a directory in which db2sqlsetup can create files.";
                xCAT::MsgUtils->message("E", " $cmd failed. $message");
                exit(1);
            }
            $cmd = "ar -x $::databaseloc/sqllib/lib/libdb2.a";
            @rpmoutput = xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                my $message = "Cannot configure the ODBC.";
                xCAT::MsgUtils->message("E", " $cmd failed. $message");
                exit(1);
            }
            $cmd = "mv shr.o $::databaseloc/sqllib/lib/libdb2.so";
            @rpmoutput = xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                my $message = "Cannot configure the ODBC.";
                xCAT::MsgUtils->message("E", " $cmd failed. $message");
                exit(1);
            }
        }
    }

    if (($::linuxos =~ /rh.*/) || ($::osname eq 'AIX'))
    {
        $odbcinstfile = "/etc/odbcinst.ini";
        $odbcfile     = "/etc/odbc.ini";
    }
    else
    {    #sles
        $odbcinstfile = "/etc/unixODBC/odbcinst.ini";
        $odbcfile     = "/etc/unixODBC/odbc.ini";
        xCAT::MsgUtils->message("E", " SLES ODBC support not implemented yet");
        exit(1);
    }

    # setup the odbcinst.ini file
    my $sharedlibaix;
    my $sharedlib32;
    my $sharedlib64;
    if ($::osname eq 'AIX') {
        $sharedlibaix = "$::databaseloc/sqllib/lib/libdb2.so";
    } else {
        $sharedlib32="$::databaseloc/sqllib/lib32/libdb2.so";
        $sharedlib64="$::databaseloc/sqllib/lib/libdb2o.so";
    }
    $cmd = "fgrep -i  DB2 $odbcinstfile ";
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)    # then DB2 entry not there
    {
        my $entry;
        if ($::osname eq 'AIX') {
          $entry =
          "[DB2]\nDescription =  DB2 Driver\nDriver   = $sharedlibaix";
          $cmd = "echo \"$entry\" >> $odbcinstfile";
          xCAT::Utils->runcmd($cmd, 0);
          if ($::RUNCMD_RC != 0)
          {
             $message = "$cmd failed. Could not setup ODBC.";
             xCAT::MsgUtils->message("E", "$message");
             exit(1);
          }
        } else { #RHEL
          $entry =
          "[DB2]\nDescription =  DB2 Driver\nDriver   = $sharedlib32\nDriver64 = $sharedlib64";
          $cmd = "echo \"$entry\" >> $odbcinstfile";
          xCAT::Utils->runcmd($cmd, 0);
          if ($::RUNCMD_RC != 0)
          {
             $message = "$cmd failed. Could not setup ODBC.";
             xCAT::MsgUtils->message("E", "$message");
             exit(1);
          }
        }
        $entry = "FileUsage = 1";
        $cmd   = "echo \"$entry\" >> $odbcinstfile";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            $message = "$cmd failed. Could not setup ODBC.";
            xCAT::MsgUtils->message("E", "$message");
            exit(1);
        }
        $entry = "DontDLClose = 1";
        $cmd   = "echo \"$entry\" >> $odbcinstfile";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            $message = "$cmd failed. Could not setup $odbcinstfile.";
            xCAT::MsgUtils->message("E", "$message");
            exit(1);
        }
        $entry = "Threading = 0";
        $cmd   = "echo \"$entry\" >> $odbcinstfile";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            $message = "$cmd failed. Could not setup $odbcinstfile.";
            xCAT::MsgUtils->message("E", "$message");
            exit(1);
        }

    }
    else
    {    # entry already there
        $message = "$odbcinstfile already configured, will not change.";
        xCAT::MsgUtils->message("I", "$message");
    }

    # setup the Database and instance Name in the  odbc.ini file
    $cmd = "fgrep -i  DB2 $odbcfile";
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)    # then xcat entry not there
    {
        my $entry = "[$instance]\nDriver   = DB2\nDATABASE = xcatdb";
        $cmd = "echo \"$entry\" >> $odbcfile";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            $message = "$cmd failed. Could not setup $odbcfile.";
            xCAT::MsgUtils->message("E", "$message");
            exit(1);

        }
    }
    else
    {    # entry already there
        $message = "$odbcfile already configured, will not change.";
        xCAT::MsgUtils->message("I", "$message");
    }

    # setup $roothome/db2cli.ini so root will not have to specify password
    # when accessing through ODBC
    # setup $::databaseloc/sqllib/cfg/db2cli.ini

    my $db2clifile       = "$::databaseloc/sqllib/cfg/db2cli.ini";
    $cmd = "db2 update cli cfg for section $instance using uid $instance"; 
    my $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
      xCAT::MsgUtils->message("SI", " $cmd warning.");
    }
    $cmd = "db2 update cli cfg for section $instance using pwd $passwd"; 
    $rc  = &rundb2cmd($cmd);
    if ($rc != 0)
    {
      xCAT::MsgUtils->message("SI", " $cmd warning.");
    }
    $cmd = "chown xcatdb $db2clifile";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
        xCAT::MsgUtils->message("E", " $cmd failed.");
    }
    $cmd = "chmod 0600 $db2clifile";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
       xCAT::MsgUtils->message("E", " $cmd failed.");
    }
    my $path= $homedir .= "\/db2cli.ini"; # copy to roots home directory
    $cmd = "cp $db2clifile $path ";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
       xCAT::MsgUtils->message("E", " $cmd failed.");
    }
    $cmd = "chmod 0600 $path";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
       xCAT::MsgUtils->message("E", " $cmd failed.");
    }
    if ($::SERVER) {  # if on the DB2 Server
      # set authorization to client so LoadL id can connect
      $cmd = "db2 update dbm cfg using authentication client immediate"; 
      $rc  = &rundb2cmd($cmd);
      if ($rc != 0)
      {
        xCAT::MsgUtils->message("SI", " $cmd warning.");
      }
    }
}

#-----------------------------------------------------------------------------

=head3   createcfgloc 
	
		 Creates the cfgloc file 
                 to run xCAT on DB2 

=cut

#-----------------------------------------------------------------------------

sub createcfgloc

{
    my $cfgloc       = "/etc/xcat/cfgloc";
    my $dir = "/etc/xcat";
    my $cfglocbackup = "/etc/xcat/cfgloc.xcat.backup";
    my $cmd;
    my $message;
    if (!(-e $dir)){ # if it does not exist, create it
      $cmd = "mkdir -p $dir";
      xCAT::Utils->runcmd($cmd, 0);
      if ($::RUNCMD_RC != 0)
      {
         xCAT::MsgUtils->message("E", " $cmd failed. Cannot create the cfgloc file");
         return 1;
      }
    }

    # if they had an old cfgloc , save it
    if (-e ($cfgloc))
    {
        $cmd = "mv $cfgloc $cfglocbackup";
        xCAT::Utils->runcmd($cmd, 0);
        if ($::RUNCMD_RC != 0)
        {
            xCAT::MsgUtils->message("E", " $cmd failed.");
        }
    }
    my $verboseflg=0;
    if ($::VERBOSE) {   # do not show commands with password
          $verboseflg=1;
          $::VERBOSE=undef;
    }
    my $db2entry = "DB2:xcatdb|xcatdb|$::adminpassword";
    $cmd = "echo \"$db2entry\" > $cfgloc";
    xCAT::Utils->runcmd($cmd, 0);
    if ($::RUNCMD_RC != 0)
    {
        $message = "$cmd failed. Could not setup cfgloc";
        xCAT::MsgUtils->message("SE", "$message");
        exit(1);

    }
    if ($verboseflg == 1) {
          $::VERBOSE=1;
    }

    # allow readonly by root
    chmod 0600, $cfgloc;

}

#-----------------------------------------------------------------------------

=head3   restorexcatdb 
	   
		Restores the database from ~/xcat-dbback and restarts the xcatd using
	        DB2	
	
=cut

#-----------------------------------------------------------------------------

sub restorexcatdb
{
    # set the env variable for Table.pm for the new database
    my $xcatcfg;
    my $cfgl;
    open($cfgl,"<","/etc/xcat/cfgloc");
    $xcatcfg = <$cfgl>;
    close($cfgl);
    chomp($xcatcfg);

    # restore the database
    xCAT::MsgUtils->message(
        "I",
        "Restoring the xCat Database with $::backupdir to DB2 database.\nThis could take several minutes."
        );
    if (!(-d $::backupdir))
    {    # does not exist, error
        xCAT::MsgUtils->message("E",
                       " $::backupdir is missing. Cannot retore the database.");
        exit(1);
    }

    # restore it
    my $cmd = "XCATBYPASS=1 XCATCFG=\"$xcatcfg\" restorexCATdb -p $::backupdir";
    # secure passwords in verbose mode
    my $tmpv = $::VERBOSE;
    $::VERBOSE = 0;
    xCAT::Utils->runcmd($cmd, 0);
    $::VERBOSE = $tmpv;
    if ($::RUNCMD_RC != 0)
    {
        xCAT::MsgUtils->message("E", " $cmd failed.");
        exit(1);
    }

    #
    # start the daemon
    #
    &startxcatd;
}
#-----------------------------------------------------------------------------

=head3   updatecrontab 
	   
	    Sets up a crontab entry to reorg the database, once a week on Sunday 
               night midnight	
	
=cut

#-----------------------------------------------------------------------------

sub  updatecrontab
{
  my $cmd="/opt/xcat/share/xcat/tools/reorgtbls";
  my $entry="0 0 * * 0 $cmd";
  my ($code, $msg)=xCAT::Utils::add_cron_job($entry);
  if ($code==0) {
        xCAT::MsgUtils->message("I", "A crontab entry has been added to run DB2 table reorg once a week on Sunday 12am.\nIf you would like to change this time, use crontab -e to modify the entry for reorgtbls execution.\nYou may also limit the tables to reorg by using the -t parameter on reorgtbls.\nRun reorgtbls -h.");
  } else {
        xCAT::MsgUtils->message("W", " Failed to add crontab entry for Table reorg.");
  }
}
#-----------------------------------------------------------------------------

=head3    adddb2paths
	
 Add paths to db2 commands to /etc/profile and ~.profile 

=cut

#-----------------------------------------------------------------------------

sub adddb2paths

{
   my $cmd;
   if ($::osname eq 'AIX')
   {
        my $profname = "/etc/profile";
        my $cmd = qq~cat $profname | grep "xCAT DB2 setup"~;
        my $outref = xCAT::Utils->runcmd("$cmd", -1);
        if ($::RUNCMD_RC != 0)
        {

            # make back up file
            my $cpcmd = qq~/bin/cp -p $profname $profname.orig1~;
            my $outref = xCAT::Utils->runcmd("$cpcmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not copy $profname.");
            }

            # add DB2 paths
            my $db2paths="$::databaseloc/sqllib/bin:$::databaseloc/sqllib/adm:$::databaseloc/sqllib/misc:$::databaseloc/sqllib/db2tss/bin";

            my $eccmd =
             qq~echo '# xCAT DB2 setup\nPATH=\$PATH:$db2paths\nexport PATH\n' >>$profname~;
            $outref = xCAT::Utils->runcmd("$eccmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not update $profname.");
            }
        } 
        my $homedir = xCAT::Utils->getHomeDir();
        $profname = "$homedir/.profile";
        if (-e ("$profname")) {  # if .profile exists
          $cmd = qq~cat $profname | grep "xCAT DB2 setup"~;
          $outref = xCAT::Utils->runcmd("$cmd", -1);
          if ($::RUNCMD_RC != 0)
          {

            # make back up file
            my $cpcmd = qq~/bin/cp -p $profname $profname.orig1~;
            my $outref = xCAT::Utils->runcmd("$cpcmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not copy $profname.");
            }

            # add DB2 paths
            my $db2paths="$::databaseloc/sqllib/bin:$::databaseloc/sqllib/adm:$::databaseloc/sqllib/misc:$::databaseloc/sqllib/db2tss/bin";

            my $eccmd =
             qq~echo '# xCAT DB2 setup\nPATH=\$PATH:$db2paths\nexport PATH\n' >>$profname~;
            $outref = xCAT::Utils->runcmd("$eccmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not update $profname.");
            }
         }
       }

   }
   else   #Linux
   {
        my $profname = "/etc/profile.d/xcatdb2.sh";
        my $cmd = qq~cat $profname | grep "db2"~;
        my $outref = xCAT::Utils->runcmd("$cmd", -1);
        if ($::RUNCMD_RC != 0)
        {

            # make back up file
            my $cpcmd = qq~/bin/cp -p $profname $profname.orig1~;
            my $outref = xCAT::Utils->runcmd("$cpcmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not copy $profname.");
            }

            # add DB2 paths
            my $db2paths="$::databaseloc/sqllib/bin:$::databaseloc/sqllib/adm:$::databaseloc/sqllib/misc:$::databaseloc/sqllib/db2tss/bin";

            my $eccmd =
             qq~echo 'PATH=\$PATH:$db2paths\nexport PATH\n' >>$profname~;
            $outref = xCAT::Utils->runcmd("$eccmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not update $profname.");
            }
        } 
        my $profname = "/etc/profile.d/xcatdb2.csh";
        my $cmd = qq~cat $profname | grep "db2"~;
        my $outref = xCAT::Utils->runcmd("$cmd", -1);
        if ($::RUNCMD_RC != 0)
        {
         
            # make back up file
            my $cpcmd = qq~/bin/cp -p $profname $profname.orig1~;
            my $outref = xCAT::Utils->runcmd("$cpcmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not copy $profname.");
            }

            # add DB2 paths
            my $db2paths="$::databaseloc/sqllib/bin:$::databaseloc/sqllib/adm:$::databaseloc/sqllib/misc:$::databaseloc/sqllib/db2tss/bin";

            my $eccmd =
             qq~echo 'setenv PATH \${PATH}:$db2paths\n' >>$profname~;
            $outref = xCAT::Utils->runcmd("$eccmd", 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message('E', "Could not update $profname.");
            }
            # set correct permissions
            $cmd = "chmod 755 /etc/profile.d/xcatdb2.sh";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
            }
            $cmd = "chmod 755 /etc/profile.d/xcatdb2.csh";
            xCAT::Utils->runcmd($cmd, 0);
            if ($::RUNCMD_RC != 0)
            {
                xCAT::MsgUtils->message("SE", " $cmd failed.");
            }
        } 
   }
}
#-----------------------------------------------------------------------------

=head3   remove
	   
		remove DB2 on management node or service node. if you want to remove it 
		from service node, you should use -s and -r flag together.
             Note this function is not supported and the code has not been
             kept up to date
	
=cut

#-----------------------------------------------------------------------------
sub remove
{
	my $cmd;
	my @output;
	my $error = 0;
	#see if DB2 is installed
	if (!(-e ($::installdb2dir)))
    {
        my $message =
          "\nDB2 is not installed.";
        xCAT::MsgUtils->message("E", "$message");
        exit(1);
    }
    
    #see if xcat is using DB2
    my $backupdic = "/xcatbackdb2";
    my $xcatconfig = "/etc/xcat/cfgloc";
    if (-e ($xcatconfig))
    {
        # if xcat is using DB2,and in management node backup database and remove db2 from xcat
        my $cmd = "egrep -i \"^DB2:\" /etc/xcat/cfgloc";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC == 0)
        {  
            #if it is management node, need to backup database
            if ($::SERVER)
            {
            	xCAT::MsgUtils->message("I","Begin to backup database, this would take a while");
            	
            	$cmd = "mkdir -p $backupdic";
            	xCAT::Utils->runcmd($cmd, -1);
            	if ($::RUNCMD_RC !=0)
            	{
            		my $message = "can't make a directory $backupdic, try again";
            		$error += 1;
            		xCAT::MsgUtils->message("E", "$message");
            		$backupdic = "/xCATbackupDB";
            		xCAT::Utils->runcmd($cmd, -1);
            		if ($::RUNCMD_RC !=0)
            		{
            			my $message = "fail again, can not make a direcorty $backupdic";
            			xCAT::MsgUtils->message("E", "$message");
            			$error += 1;
            			exit(1);
            		}
            	}
            	
            	my $cmd = "ps -elf|grep xcatd";
                my @output = xCAT::Utils->runcmd($cmd, 0);
                if ($::RUNCMD_RC == 0)
                {      
                    if ($::osname eq 'AIX')
                    {
                    	my $cmd = "startsrc -s xcatd";
                    }
                    else
                    {           
                    	my $cmd = "service xcatd start";
                    }
                    xCAT::Utils->runcmd($cmd, -1);
            	    if ($::RUNCMD_RC !=0)
            	    {
            	    	my $message = "can't start xcatd";
            	    	$error += 1;
            	    	xCAT::MsgUtils->message("E", "$message");
            	    	exit(1);
            	    }
                } 	        	
            	
            	
            	$cmd = "dumpxCATdb -p $backupdic";
                xCAT::Utils->runcmd($cmd, -1);        	
            	if ($::RUNCMD_RC !=0)
            	{        	
            		my $message = "can't dump xcatdb";
            		xCAT::MsgUtils->message("E", "$message");  
            		$error += 1;      			
            	    exit(1);
            	}           	            	
            }
            
            if ($::osname eq 'AIX')
            {
            	my $cmd = "stopsrc -s xcatd";
            }
            else
            {           
            	my $cmd = "service xcatd stop";
            }
            xCAT::Utils->runcmd($cmd, -1);
            if ($::RUNCMD_RC !=0)
            {
            	my $message = "can't stop xcatd";
            	xCAT::MsgUtils->message("E", "$message");
            	$error += 1;
            	exit(1);
            }
                	
            
            my $cmd = "rm -rf /etc/xcat/cfgloc";
            xCAT::Utils->runcmd($cmd, -1);
            if ($::RUNCMD_RC !=0)
            {
            	my $message = "can't remove cfgloc file";
            	xCAT::MsgUtils->message("E", "$message");
            	$error += 1;
            	exit(1);
            }
                	
            if ($::SERVER)
            {        	
                my $cmd = "XCATBYPASS=1 restorexCATdb -p $backupdic";
                xCAT::Utils->runcmd($cmd, -1);   
                if ($::RUNCMD_RC != 0)
                {     	
                	my $message = "can't restore xcat database";
                	xCAT::MsgUtils->message("E", "$message");
                	$error += 1;
                	exit(1);
                }
                
            }
            
            
            if ($::osname eq 'AIX')
            {
            	my $cmd = "startsrc -s xcatd";
            }
            else
            {           
            	my $cmd = "service xcatd start";
            }
            xCAT::Utils->runcmd($cmd, -1);
            if ($::RUNCMD_RC !=0)
            {
            	my $message = "can't start xcatd";
            	xCAT::MsgUtils->message("E", "$message");
            	$error += 1;
            }

            xCAT::MsgUtils->message("I", "Have remove DB2 from xCAT. \n");              
        }
    }
            

    xCAT::MsgUtils->message("I", "Begin to remove DB2 \n");  
    if ($::SERVER)
    { 
        #remove database
        my $cmd = "db2 force application all";
        my $rc = &rundb2cmd($cmd);
        if ($rc != 0)
        {
            xCAT::MsgUtils->message("W", " $cmd failed. \n");
            $error += 1;
            #exit(1);
        }
        
        $cmd = "db2 drop database xcatdb";
        $rc = &rundb2cmd($cmd);
        if ($rc != 0)
        {
            xCAT::MsgUtils->message("W", " $cmd failed.\n");
            $error += 1;
            #exit(1);
        }
        else
        {
            xCAT::MsgUtils->message("W", "db2 stop \n.");
        }
        
        $cmd = "db2stop";
        $rc = &rundb2cmd($cmd);
        if ($rc != 0)
        {
            xCAT::MsgUtils->message("W", " $cmd failed. \n");
            $error += 1;
            #exit(1);
        } 
        
    }
    #remove instance
    $cmd = $::installdb2dir;
    $cmd = $cmd."/instance/db2idrop xcatdb";
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC !=0) 
    {
   	     my $message = "can't drop DB2 instance \n";
   	     xCAT::MsgUtils->message("E", "$message");
   	     exit(1);
    }
    
    #check if all the instances have been removed
    $cmd = $::installdb2dir;
    $cmd = $cmd."/instance/db2ilist";
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC !=0) 
    {
   	     my $message = "there is still instance, can't uninstall DB2\n";
   	     xCAT::MsgUtils->message("E", "$message");
   	     $error += 1;
    }    
    else
    {
        #uninstall DB2
        $cmd = $::installdb2dir;
        $cmd = $cmd."/install/db2_deinstall -a";        	    
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC !=0) 
        {
   	        my $message = "can't uninstall DB2 \n";
   	        xCAT::MsgUtils->message("E", "$message");
   	        $error += 1;
   	        #exit(1);
        }        	                                 
        xCAT::MsgUtils->message("I", "Remove DB2 successfully, begin to cleanup the enviroment. \n");
    }        
    
      
    #unconfig enviroment
    $cmd = "egrep -i \"^db2c_xcatdb\" /etc/services";
    xCAT::Utils->runcmd($cmd, -1);
    my $file1 = "/etc/services";
    if ($::RUNCMD_RC == 0)
    {  
        open(FH,"+<$file1") or die "cannot open file $file1 \n";   
        $cmd = "touch /etc/services.back";
        xCAT::Utils->runcmd($cmd, -1);
        open(DH,"+</etc/services.back") or die "cannot open file services.back \n";  
        foreach (<FH>)
        {
        	my $line = $_;
            if($line !~ /xcatdb/)
            {
                print DH $line;   
             }
        }
        close(FH);
        close(DH);
        $cmd = "mv /etc/services.back $file1";
        xCAT::Utils->runcmd($cmd, -1);          
        #$cmd = "cat $file1 | sed s/.*xcatdb.*// > $file1";
        #xCAT::Utils->runcmd($cmd, -1);        
    }
    
    
    if ($::osname eq 'AIX')
    {
        $cmd = "rmuser xcatdb";
    }
    else
    {
        $cmd = "userdel -f xcatdb";
    }
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)
    {
   	    my $message = "can't remove user xcatdb \n";
   	    xCAT::MsgUtils->message("E", "$message");
   	    $error += 1;
    }                 	

    if ($::osname eq 'AIX')
    {
        $cmd = "rmgroup xcatdb";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC != 0)
        {
   	        my $message = "can't remove group xcatdb \n";
   	        xCAT::MsgUtils->message("E", "$message");
   	        $error += 1;
        }  
    }
   
   
    $cmd = "rm -rf ";
    $cmd = $cmd.$::installdb2dir;	
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)
    {
   	    my $message = "can't remove the directory $::installdb2dir  /db2/V9.7 \n";
   	    xCAT::MsgUtils->message("E", "$message");
   	    $error += 1;
    }
   
    $cmd = "rm -rf $::databaseloc/";	
    xCAT::Utils->runcmd($cmd, -1);
    if ($::RUNCMD_RC != 0)
    {
   	    my $message = "can't remove the directory $::databaseloc \n*";
   	    xCAT::MsgUtils->message("E", "$message");
   	    $error += 1;
    }
   
    my $file2;
    if ($::osname eq 'AIX')
    {
    	$file2 = "/etc/profile";
        open(FH,"+<$file2") or die "cannot open file $file2 \n";   
        $cmd = "touch /etc/tmp.back";
        xCAT::Utils->runcmd($cmd, -1);
        open(DH,"+</etc/tmp.back") or die "cannot open file tmp.back \n";  
        foreach (<FH>)
        {
        	my $line = $_;
            if(($line !~ /xcatdb/) and ($line !~ /EXTSHM/))
            {
                print DH $line;
             }
        }
        close(FH);
        close(DH);
        $cmd = "mv /etc/tmp.back $file2";
        xCAT::Utils->runcmd($cmd, -1);      	
    }
    else
    {   
    	$file2 = "/etc/profile.d/xcat.sh";
        $cmd = "egrep -i \"DB2INSTANCE\" /etc/profile.d/xcat.sh";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC == 0)   
        { 	
            open(FH,"+<$file2") or die "cannot open file $file2 \n";   
            $cmd = "touch /etc/tmp.back";
            xCAT::Utils->runcmd($cmd, -1);
            open(DH,"+</etc/tmp.back") or die "cannot open file tmp.back \n";  
            foreach (<FH>)
            {
            	my $line = $_;
                if(($line !~ /xcatdb/) and ($line !~ /EXTSHM/))
                {
                    print DH $line;
                 }
            }
            close(FH);
            close(DH);
            $cmd = "mv /etc/tmp.back $file2";
            xCAT::Utils->runcmd($cmd, -1);  
        }  
        
    	$file2 = "/etc/profile.d/xcat.csh";
        $cmd = "egrep -i \"DB2INSTANCE\" /etc/profile.d/xcat.csh";
        xCAT::Utils->runcmd($cmd, -1);
        if ($::RUNCMD_RC == 0)   
        { 	
            open(FH,"+<$file2") or die "cannot open file $file2 \n";   
            $cmd = "touch /etc/tmp.back";
            xCAT::Utils->runcmd($cmd, -1);
            open(DH,"+</etc/tmp.back") or die "cannot open file tmp.back \n";  
            foreach (<FH>)
            {
            	my $line = $_;
                if(($line !~ /xcatdb/) and ($line !~ /EXTSHM/))
                {
                    print DH $line;
                 }
            }
            close(FH);
            close(DH);
            $cmd = "mv /etc/tmp.back $file2";
            xCAT::Utils->runcmd($cmd, -1);  
        }           	
    }  
    
    #$cmd = "cat $file2 | sed s/.*xcatdb.*// > $file2";
    #xCAT::Utils->runcmd($cmd, -1);
    #$cmd = "cat $file2 | sed s/.*EXTSHM.*// > $file2";        
    #xCAT::Utils->runcmd($cmd, -1);
        
    xCAT::MsgUtils->message("I", "Cleanup completely finished. $error errors have got. \n");        
    
}
#-----------------------------------------------------------------------------

=head3    updatepasswd 
	
   if -S , then update the xcatdb instance password on the MN
      -C , then update the xcatdb instance password on the clients (SN)
      if just -p , then update the xcatdb intance password on both  

=cut

#-----------------------------------------------------------------------------

sub updatepasswd 

{
  my $rc=0;
  $ENV{'XCATDB2QUIET'} = 1;
  my $updateclient=0;
  my $updateserver=0;
  if ($::SERVER) {  # going to update the server MN
    $updateserver=1;
  }

  if ($::CLIENT) {  # going to update the clients (SNs)
    $updateclient=1;
  }
  if ((!($::CLIENT)) && (!($::SERVER))) { # update both MN and SNs
    $updateserver=1;
    $updateclient=1;
  }
  my $snlist;
  # must read the database before we change the password on the MN
  # to get the list of Service Nodes
  if ($updateclient==1) { 
   if (xCAT::Utils->isMN()) {    # if on Management Node
     my @allSN=xCAT::Utils->getAllSN;
     foreach my $nodes (@allSN) {
       $snlist.=$nodes;
       $snlist.="\,";
     }
     chop $snlist;
   }
  }
  # change password on the MN
  if ($updateserver==1) {  # we will change the MN
     # then shutdown xcatd
     # First change xcatd password
     # change /etc/xcat/cfgloc
     # then restart xcatd
     # change odbc password, if it exists
     &shutdownxcatd;
     &mkdb2user;
     &createcfgloc; 
     &startxcatd;
     &setupODBC;
  }
  # change password on the Service Nodes
  # note this routine will be run on the SN's also from xdsh
  if ($updateclient==1)  {  # Update the clients 
   if (xCAT::Utils->isMN()) {    # if on Management Node
     # xdsh <servicenodes>  -v /opt/xcat/bin/db2sqlsetup -C -p
     my $cmd="xdsh $snlist -v DATABASELOC=$::databaselocdir XCATDB2PW=$::adminpassword \/opt\/xcat\/bin\/db2sqlsetup -C -p";
     # secure passwords in verbose mode
     my $tmpv = $::VERBOSE;
     $::VERBOSE = 0;
     xCAT::Utils->runcmd($cmd, 0);
     if ($::RUNCMD_RC != 0)
     {
         my $cmd2="xdsh $snlist -v DATABASELOC=$::databaselocdir XCATDB2PW=XXXXXX \/opt\/xcat\/bin\/db2sqlsetup -C -p";
        my $message =
          "$cmd2 failed.  Could not change password on all the Service Nodes";
        xCAT::MsgUtils->message("E", "$message");
     }
     $::VERBOSE = $tmpv;
   } else { # on the SN
     &shutdownxcatd;
     &mkdb2user;
     &createcfgloc; 
     &startxcatd;
     &setupODBC;
   }
  }
 
  return $::RUNCMD_RC;
}