xcat-core/buildcore.sh

366 lines
10 KiB
Bash
Raw Normal View History

# The shell is commented out so that it will run in bash on linux and ksh on aix
# !/bin/bash
# Build and upload the xcat-core code, on either linux or aix.
# Getting Started:
# - Check out the xcat-core svn repository (either the trunk or a branch) into
# a dir called <rel>/src/xcat-core, where <rel> is the same as the release dir it will be
# uploaded to in sourceforge (e.g. devel, or 2.3).
# - You probably also want to put root's pub key from the build machine onto sourceforge for
# the upload user listed below, so you don't have to keep entering pw's. You can do this
# at https://sourceforge.net/account/ssh
# - On Linux: make sure createrepo is installed on the build machine
# - On AIX: Install openssl and openssh installp pkgs and run updtvpkg. Install from http://www.perzl.org/aix/
# apr, apr-util, bash, bzip2, db4, expat, gdbm, gettext, glib2, gmp, info, libidn, neon, openssl (won't
# conflict with the installp version), pcre, perl-DBD-SQLite, perl-DBI, popt, python, readline, rsynce, sqlite,
# subversion, unixODBC, wget, zlib.
# - Run this script from the local svn repository you just created. It will create the other
# directories that are needed.
# Usage: buildcore.sh [attr=value attr=value ...]
# PROMOTE=1 - if the attribute "PROMOTE" is specified, means an official dot release.
# Otherwise, and snap build is assumed.
# UP=0 or UP=1 - override the default upload behavior
# SVNUP=<filename> - control which rpms get built by specifying a coresvnup file
# you can change this if you need to
UPLOADUSER=bp-sawyers
OSNAME=$(uname)
if [ "$OSNAME" = "AIX" ]; then
GSA=http://pokgsa.ibm.com/projects/x/xcat/build/linux
fi
set -x
# Process cmd line variable assignments, assigning each attr=val pair to a variable of same name
for i in $*; do
#declare `echo $i|cut -d '=' -f 1`=`echo $i|cut -d '=' -f 2`
export $i
done
if [ "$OSNAME" != "AIX" ]; then
export HOME=/root # This is so rpm and gpg will know home, even in sudo
fi
cd `dirname $0`
# Strip the /src/xcat-core from the end of the dir to get the next dir up and use as the release
CURDIR=`pwd`
#D=${CURDIR/\/src\/xcat-core/}
D=${CURDIR%/src/xcat-core}
REL=`basename $D`
XCATCORE="xcat-core"
svn up Version
VER=`cat Version`
if [ "$PROMOTE" = 1 ]; then
CORE="xcat-core"
if [ "$OSNAME" = "AIX" ]; then
TARNAME=core-aix-$VER.tar.gz
else
TARNAME=xcat-core-$VER.tar.bz2
fi
else
CORE="core-snap"
if [ "$OSNAME" = "AIX" ]; then
TARNAME=core-aix-snap.tar.gz
else
TARNAME=core-rpms-snap.tar.bz2
fi
fi
DESTDIR=../../$XCATCORE
SRCD=core-snap-srpms
if [ "$PROMOTE" != 1 ]; then # very long if statement to not do builds if we are promoting
mkdir -p $DESTDIR
SRCDIR=../../$SRCD
mkdir -p $SRCDIR
GREP=grep
# currently aix builds ppc rpms, but it should build noarch
if [ "$OSNAME" = "AIX" ]; then
NOARCH=ppc
else
NOARCH=noarch
fi
UPLOAD=0
if [ "$OSNAME" = "AIX" ]; then
source=/opt/freeware/src/packages
else
if [ -f /etc/redhat-release ]; then
source="/usr/src/redhat"
else
source="/usr/src/packages"
fi
fi
# If they have not given us a premade update file, do an svn update and capture the results
if [ -z "$SVNUP" ]; then
SVNUP=../coresvnup
svn up > $SVNUP
fi
# If anything has changed, we should rebuild perl-xCAT
BUILDIT=0
if ! $GREP 'At revision' $SVNUP; then
BUILDIT=1
fi
if $GREP xCAT-client $SVNUP; then
UPLOAD=1
./makeclientrpm
rm -f $DESTDIR/xCAT-client*rpm
rm -f $SRCDIR/xCAT-client*rpm
mv $source/RPMS/$NOARCH/xCAT-client-$VER*rpm $DESTDIR/
mv $source/SRPMS/xCAT-client-$VER*rpm $SRCDIR/
fi
if [ "$OSNAME" = "AIX" ]; then
# For the 1st one we overwrite, not append
echo "rpm -Uvh xCAT-client-$VER-*rpm" > $DESTDIR/instxcat
fi
if [ $BUILDIT -eq 1 ]; then # Use to be: $GREP perl-xCAT $SVNUP; then
UPLOAD=1
./makeperlxcatrpm
rm -f $DESTDIR/perl-xCAT*rpm
rm -f $SRCDIR/perl-xCAT*rpm
mv $source/RPMS/$NOARCH/perl-xCAT-$VER*rpm $DESTDIR/
mv $source/SRPMS/perl-xCAT-$VER*rpm $SRCDIR/
fi
if [ "$OSNAME" = "AIX" ]; then
echo "rpm -Uvh perl-xCAT-$VER-*rpm" >> $DESTDIR/instxcat
fi
if $GREP xCAT-UI $SVNUP; then
UPLOAD=1
rm -f $DESTDIR/xCAT-UI*rpm
rm -f $SRCDIR/xCAT-UI*rpm
./makeuirpm
mv $source/RPMS/noarch/xCAT-UI-$VER*rpm $DESTDIR
mv $source/SRPMS/xCAT-UI-$VER*rpm $SRCDIR
fi
if [ "$OSNAME" = "AIX" ]; then
echo "rpm -Uvh xCAT-UI-$VER-*rpm" >> $DESTDIR/instxcat
fi
if $GREP xCAT-server $SVNUP; then
UPLOAD=1
./makeserverrpm
rm -f $DESTDIR/xCAT-server*rpm
rm -f $SRCDIR/xCAT-server*rpm
mv $source/RPMS/$NOARCH/xCAT-server-$VER*rpm $DESTDIR
mv $source/SRPMS/xCAT-server-$VER*rpm $SRCDIR
fi
if [ "$OSNAME" = "AIX" ]; then
echo "rpm -Uvh xCAT-server-$VER-*rpm" >> $DESTDIR/instxcat
fi
if $GREP xCAT-rmc $SVNUP; then
UPLOAD=1
./makermcrpm
rm -f $DESTDIR/xCAT-rmc*rpm
rm -f $SRCDIR/xCAT-rmc*rpm
mv $source/RPMS/$NOARCH/xCAT-rmc-$VER*rpm $DESTDIR
mv $source/SRPMS/xCAT-rmc-$VER*rpm $SRCDIR
fi
if [ "$OSNAME" = "AIX" ]; then
echo "rpm -Uvh xCAT-rmc-$VER-*rpm" >> $DESTDIR/instxcat
fi
if [ "$OSNAME" != "AIX" ]; then
if $GREP xCAT-nbroot $SVNUP; then
UPLOAD=1
./makenbrootrpm x86_64
./makenbrootrpm ppc64
./makenbrootrpm x86
rm -f $DESTDIR/xCAT-nbroot-core*rpm
rm -f $SRCDIR/xCAT-nbroot-core*rpm
mv $source/RPMS/noarch/xCAT-nbroot-core-*rpm $DESTDIR
mv $source/SRPMS/xCAT-nbroot-core-*rpm $SRCDIR
fi
fi
if [ "$OSNAME" != "AIX" ]; then
if $GREP -E '^[UAD] +xCATsn/' $SVNUP; then
UPLOAD=1
rm -f $DESTDIR/xCATsn-$REL*rpm
rm -f $SRCDIR/xCATsn-$REL*rpm
./makexcatsnrpm x86_64
mv $source/RPMS/*/xCATsn-$VER*rpm $DESTDIR
mv $source/SRPMS/xCATsn-$VER*rpm $SRCDIR
./makexcatsnrpm i386
mv $source/RPMS/*/xCATsn-$VER*rpm $DESTDIR
./makexcatsnrpm ppc64
mv $source/RPMS/*/xCATsn-$VER*rpm $DESTDIR
./makexcatsnrpm s390x
mv $source/RPMS/*/xCATsn-$VER*rpm $DESTDIR
fi
fi
if $GREP -E '^[UAD] +xCAT/' $SVNUP; then
UPLOAD=1
rm -f $DESTDIR/xCAT-$REL*rpm
rm -f $SRCDIR/xCAT-$REL*rpm
if [ "$OSNAME" = "AIX" ]; then
./makexcatrpm
mv $source/RPMS/*/xCAT-$VER*rpm $DESTDIR
mv $source/SRPMS/xCAT-$VER*rpm $SRCDIR
echo "rpm -Uvh xCAT-$VER-*rpm" >> $DESTDIR/instxcat
else
./makexcatrpm x86_64
mv $source/RPMS/*/xCAT-$VER*rpm $DESTDIR
mv $source/SRPMS/xCAT-$VER*rpm $SRCDIR
./makexcatrpm i386
mv $source/RPMS/*/xCAT-$VER*rpm $DESTDIR
./makexcatrpm ppc64
mv $source/RPMS/*/xCAT-$VER*rpm $DESTDIR
./makexcatrpm s390x
mv $source/RPMS/*/xCAT-$VER*rpm $DESTDIR
fi
fi
if [ "$OSNAME" = "AIX" ]; then
# add the service node bundle files
cp xCATaixSN.bnd xCATaixSN2.bnd xCATaixSSH.bnd xCATaixSSL.bnd $DESTDIR/
fi
# Decide if anything was built or not
if [ $UPLOAD == 0 -a "$UP" != 1 ]; then
echo "Nothing new detected"
exit 0;
fi
#else we will continue
# Prepare the RPMs for pkging and upload
# get gpg keys in place
if [ "$OSNAME" != "AIX" ]; then
mkdir -p $HOME/.gnupg
for i in pubring.gpg secring.gpg trustdb.gpg; do
if [ ! -f $HOME/.gnupg/$i ] || [ `wc -c $HOME/.gnupg/$i|cut -f 1 -d' '` == 0 ]; then
rm -f $HOME/.gnupg/$i
wget -P $HOME/.gnupg $GSA/keys/$i
chmod 600 $HOME/.gnupg/$i
fi
done
# tell rpm to use gpg to sign
MACROS=$HOME/.rpmmacros
if ! $GREP -q '%_signature gpg' $MACROS 2>/dev/null; then
echo '%_signature gpg' >> $MACROS
fi
if ! $GREP -q '%_gpg_name' $MACROS 2>/dev/null; then
echo '%_gpg_name Jarrod Johnson' >> $MACROS
fi
build-utils/rpmsign.exp $DESTDIR/*rpm
build-utils/rpmsign.exp $SRCDIR/*rpm
createrepo $DESTDIR
createrepo $SRCDIR
rm -f $SRCDIR/repodata/repomd.xml.asc
rm -f $DESTDIR/repodata/repomd.xml.asc
gpg -a --detach-sign $DESTDIR/repodata/repomd.xml
gpg -a --detach-sign $SRCDIR/repodata/repomd.xml
if [ ! -f $DESTDIR/repodata/repomd.xml.key ]; then
wget -P $DESTDIR/repodata $GSA/keys/repomd.xml.key
fi
if [ ! -f $SRCDIR/repodata/repomd.xml.key ]; then
wget -P $SRCDIR/repodata $GSA/keys/repomd.xml.key
fi
fi
# make everything have a group of xcat, so anyone can manage them once they get on SF
if [ "$OSNAME" = "AIX" ]; then
mkgroup xcat 2>/dev/null
chmod +x $DESTDIR/instxcat
else
groupadd -f xcat
fi
chgrp -R xcat $DESTDIR
chmod -R g+w $DESTDIR
chgrp -R xcat $SRCDIR
chmod -R g+w $SRCDIR
fi # end of very long if-not-promote
cd $DESTDIR
if [ "$OSNAME" != "AIX" ]; then
# Modify the repo file to point to either xcat-core or core-snap
# Always recreate it, in case the whole dir was copied from devel to 2.x
cat >xCAT-core.repo << EOF
[xcat-2-core]
name=xCAT 2 Core packages
baseurl=http://xcat.sourceforge.net/yum/$REL/$CORE
enabled=1
gpgcheck=1
gpgkey=http://xcat.sourceforge.net/yum/$REL/$CORE/repodata/repomd.xml.key
EOF
# Create the mklocalrepo script
cat >mklocalrepo.sh << 'EOF2'
#!/bin/sh
cd `dirname $0`
REPOFILE=`basename xCAT-*.repo`
sed -e 's|baseurl=.*|baseurl=file://'`pwd`'|' $REPOFILE | sed -e 's|gpgkey=.*|gpgkey=file://'`pwd`'/repodata/repomd.xml.key|' > /etc/yum.repos.d/$REPOFILE
cd -
EOF2
fi
# Build the tarball
cd ..
if [ "$OSNAME" = "AIX" ]; then
tar -hcvf ${TARNAME%.gz} $XCATCORE
rm -f $TARNAME
gzip ${TARNAME%.gz}
else
tar -hjcvf $TARNAME $XCATCORE
fi
chgrp xcat $TARNAME
chmod g+w $TARNAME
# Decide whether to upload or not
if [ -n "$UP" ] && [ "$UP" == 0 ]; then
exit 0;
fi
#else we will continue
# Upload the individual RPMs to sourceforge
if [ "$OSNAME" = "AIX" ]; then
YUM=aix
else
YUM=yum
fi
if [ ! -e core-snap ]; then
ln -s xcat-core core-snap
fi
while ! rsync -urLv --delete $CORE $UPLOADUSER,xcat@web.sourceforge.net:htdocs/$YUM/$REL/
do : ; done
# Upload the individual source RPMs to sourceforge
while ! rsync -urLv --delete $SRCD $UPLOADUSER,xcat@web.sourceforge.net:htdocs/$YUM/$REL/
do : ; done
# Upload the tarball to sourceforge
if [ "$PROMOTE" = 1 -a "$REL" != "devel" ]; then
# upload tarball to FRS area
#scp $TARNAME $UPLOADUSER@web.sourceforge.net:uploads/
while ! rsync -v $TARNAME $UPLOADUSER,xcat@web.sourceforge.net:/home/frs/project/x/xc/xcat/xcat/$REL.x_$OSNAME/
do : ; done
else
while ! rsync -v $TARNAME $UPLOADUSER,xcat@web.sourceforge.net:htdocs/$YUM/$REL/
do : ; done
fi
# Extract and upload the man pages in html format
if [ "$OSNAME" != "AIX" -a "$REL" = "devel" -a "$PROMOTE" != 1 ]; then
mkdir -p man
cd man
rm -rf opt
rpm2cpio ../$XCATCORE/xCAT-client-*.$NOARCH.rpm | cpio -id '*.html'
rpm2cpio ../$XCATCORE/perl-xCAT-*.$NOARCH.rpm | cpio -id '*.html'
while ! rsync -rv opt/xcat/share/doc/man1 opt/xcat/share/doc/man3 opt/xcat/share/doc/man5 opt/xcat/share/doc/man8 $UPLOADUSER,xcat@web.sourceforge.net:htdocs/
do : ; done
cd ..
fi