xcat-core/xCAT-SoftLayer/si-post-install/16all.updatenetwork

#!/bin/bash

# SI post-install script to configure network settings after SI has installed the OS
# SI post-install scripts run in a chroot environment of the final OS image

. /tmp/post-install/variables.txt

bondingopts='mode=4 miimon=100 downdelay=0 updelay=0 lacp_rate=fast xmit_hash_policy=1'

# determine if we should be using a static ip or dhcp
staticIP () {
    # Eventually we should use the SI variable IP_ASSIGNMENT_METHOD below to determine this.
    # But this requires a patch in both xcat/sysclone (to set si_getimage -ip-assignment method)
    # and SI (to set IP_ASSIGNMENT_METHOD as a result of that).  Until both of those patches
    # are in the main releases, assume that if we have set the IPADDR kernel parm for the boot
    # kernel to use static ip, that the final OS should use static ip too.
    # Note: the IPADDR environment variable will be set by SI, even if it got it thru dhcp, so
    #       that is not a reliable way to decide.
    str=`cat /proc/cmdline`
    #str='netmask=255.255.255.192 IPADDR=10.54.51.11 GATEWAY=10.54.51.1 dns=10.54.51.2 hostname=sap64-4 DEVICE=eth0'
    for parm in $str; do
        key=`echo $parm|awk -F= '{print $1}'`
        value=`echo $parm|awk -F= '{print $2}'`
        if [[ $key == "IPADDR" || $key == "ipaddr" ]]; then
            return 0    # yes, we should use static ip
        fi
    done
    if [[ -n $IP_ASSIGNMENT_METHOD && ${IP_ASSIGNMENT_METHOD,,} == "static" ]]; then
        return 0    # this means yes/true
    fi
    return 1
}

#delete the udev rule in the image
rule_file=`ls /etc/udev/rules.d/*net_persistent_names.rules 2>/dev/null`
if [ -n "$rule_file" ];then
    rm -f $rule_file
fi

hostname $HOSTNAME
bond=bond0
if [[ $DEVICE == "eth0" ]]; then
    $DEVICE2=eth2
fi

device_names=`ifconfig -a | grep -i hwaddr | grep -i 'Ethernet' | grep -v usb| awk '{print $1}'`
str_cfg_file=''
if [ -d "/etc/sysconfig/network-scripts/" ];then
    #redhat
    dir="/etc/sysconfig/network-scripts"
    grep -i HOSTNAME /etc/sysconfig/network
    if [ $? -eq 0 ];then
        sed -i "s/HOSTNAME=.*/HOSTNAME=$HOSTNAME/g" /etc/sysconfig/network
    else
        echo "HOSTNAME=$HOSTNAME" >> /etc/sysconfig/network
    fi
    if staticIP; then
        # delete all nic cfg files left over from the golden node
        for i in $device_names;do
            rm -f "$dir/ifcfg-$i"
        done

        # set static ip from variables in variables.txt
        # write ifcfg-bond0.  For now we assume the installnic should be part of bond0,
        # because in SL i think that is always the case.
        i="$bond"
        str_cfg_file="$dir/ifcfg-$i"
        echo "DEVICE=$i" > $str_cfg_file
        echo "BOOTPROTO=none" >> $str_cfg_file
        echo "ONBOOT=yes" >> $str_cfg_file
        echo "USERCTL=no" >> $str_cfg_file
        echo 'BONDING_OPTS="'$bondingopts'"' >> $str_cfg_file
        echo "IPADDR=$IPADDR" >> $str_cfg_file
        echo "NETMASK=$NETMASK" >> $str_cfg_file
        echo "NETWORK=$NETWORK" >> $str_cfg_file
        echo "BROADCAST=$BROADCAST" >> $str_cfg_file
        #todo: add gateway config?  Not sure, because the boot kernels gateway might not be the final OS gateway

        # write ifcfg-eth0
        i="$DEVICE"
        str_cfg_file="$dir/ifcfg-$i"
        echo "DEVICE=$i" > $str_cfg_file
        echo "BOOTPROTO=none" >> $str_cfg_file
        echo "MASTER=$bond" >> $str_cfg_file
        echo "ONBOOT=yes" >> $str_cfg_file
        echo "SLAVE=yes" >> $str_cfg_file
        echo "USERCTL=no" >> $str_cfg_file

        if [[ $DEVICE2 != "" ]]; then
            # write ifcfg-eth0
            i="$DEVICE2"
            str_cfg_file="$dir/ifcfg-$i"
            echo "DEVICE=$i" > $str_cfg_file
            echo "BOOTPROTO=none" >> $str_cfg_file
            echo "MASTER=$bond" >> $str_cfg_file
            echo "ONBOOT=yes" >> $str_cfg_file
            echo "SLAVE=yes" >> $str_cfg_file
            echo "USERCTL=no" >> $str_cfg_file
        fi

        # write modprobe alias config
        str_cfg_file="/etc/modprobe.d/$bond.conf"
        echo "alias $bond bonding" > $str_cfg_file

        #todo: figure out how to set the default gateway in rhel
    else
        # use dhcp for all nics
        for i in $device_names;do
            str_cfg_file="$dir/ifcfg-$i"
            echo "DEVICE=$i" > $str_cfg_file
            echo "BOOTPROTO=dhcp" >> $str_cfg_file
            echo "NM_CONTROLLED=yes" >> $str_cfg_file
            echo "ONBOOT=yes" >> $str_cfg_file
        done
    fi
elif [ -d "/etc/sysconfig/network/" ];then
    #suse
    dir="/etc/sysconfig/network"
    echo "$HOSTNAME" > /etc/HOSTNAME
    if staticIP; then
        # delete all nic cfg files left over from the golden node
        for i in $device_names;do
            rm -f "$dir/ifcfg-$i"
        done

        # set static ip from variables in variables.txt
        # write ifcfg-bond0.  For now we assume the installnic should be part of bond0,
        # because in SL i think that is always the case.
        i="$bond"
        str_cfg_file="$dir/ifcfg-$i"
        echo "BOOTPROTO=static" > $str_cfg_file
        echo "STARTMODE=onboot" >> $str_cfg_file
        echo "BONDING_MASTER=yes" >> $str_cfg_file
        echo "BONDING_MODULE_OPTS='$bondingopts'" >> $str_cfg_file
        echo "NAME='Bonded Interface'" >> $str_cfg_file
        echo "IPADDR=$IPADDR" >> $str_cfg_file
        echo "NETMASK=$NETMASK" >> $str_cfg_file
        echo "NETWORK=$NETWORK" >> $str_cfg_file
        echo "BROADCAST=$BROADCAST" >> $str_cfg_file
        echo "USERCONTROL=no" >> $str_cfg_file
        echo "BONDING_SLAVE_0=$DEVICE" >> $str_cfg_file
        if [[ $DEVICE2 != "" ]]; then
            echo "BONDING_SLAVE_1=$DEVICE2" >> $str_cfg_file
        fi

        # write ifcfg-eth0
        i="$DEVICE"
        str_cfg_file="$dir/ifcfg-$i"
        echo "BOOTPROTO=none" > $str_cfg_file
        echo "STARTMODE=hotplug" >> $str_cfg_file

        if [[ $DEVICE2 != "" ]]; then
            # write ifcfg-eth2
            i="$DEVICE2"
            str_cfg_file="$dir/ifcfg-$i"
            echo "BOOTPROTO=none" > $str_cfg_file
            echo "STARTMODE=hotplug" >> $str_cfg_file
        fi

        # write modprobe alias config
        str_cfg_file="/etc/modprobe.d/$bond.conf"
        echo "alias $bond bonding" > $str_cfg_file

        # set the default gateway (at this point this is the private nic gateway, to handle provision across vlans)
        file=/etc/sysconfig/network/routes
        if grep -q -E '^default ' $file; then
            # replace the default route that is already in there
            sed -i 's/^default .*$/default '$GATEWAY' - -/' $file
        else
            # no default route yet, append to file
            echo "default $GATEWAY - -" >>$file
        fi

        # this was the original config of the eth0 nic (without bonding)
        #echo "DEVICE=$i" > $str_cfg_file
        #echo "BOOTPROTO=static" >> $str_cfg_file
        #echo "STARTMODE=onboot" >> $str_cfg_file
        #echo "IPADDR=$IPADDR" >> $str_cfg_file
        #echo "NETMASK=$NETMASK" >> $str_cfg_file
        #echo "NETWORK=$NETWORK" >> $str_cfg_file
        #echo "BROADCAST=$BROADCAST" >> $str_cfg_file
        #todo: add gateway config?  Not sure, because the boot kernels gateway might not be the final OS gateway
    else
        # use dhcp for all nics
        for i in $device_names;do
            str_cfg_file="$dir/ifcfg-$i"
            echo "DEVICE=$i" > $str_cfg_file
            echo "BOOTPROTO=dhcp" >> $str_cfg_file
            echo "STARTMODE=onboot" >> $str_cfg_file
            echo "DHCLIENT_PRIMARY_DEVICE=yes" >> $str_cfg_file
        done
    fi
else
    #ubuntu
    echo "Does not support ubuntu."
    exit 1
fi