2008-10-17 01:45:03 +00:00
< ? php
// Display a wizard to assist the user in discovering new nodes
$TOPDIR = '..' ;
require_once " $TOPDIR /lib/functions.php " ;
require_once " $TOPDIR /lib/wizard.php " ;
// This array controls the order of pages in the wizard
$pages = array ( 'intro' => 'Discover Hardware' ,
'patterns' => 'Cluster Patterns' ,
2008-11-03 21:47:38 +00:00
'patterns1b' => 'Switch Ports' ,
2008-10-17 01:45:03 +00:00
'patterns2' => 'More Cluster Patterns' ,
'preparemn' => 'Prepare Management Node' ,
'prediscover' => 'Power On Hardware' ,
'discover' => 'Discover HW Control Points' ,
'updatedefs' => 'Update Definitions' ,
'configurehcps' => 'Configure HW Control Points' ,
'createnodes' => 'Create Nodes' ,
2008-11-03 21:47:38 +00:00
/* 'testhcps' => 'Test HW Control', */
2008-10-17 01:45:03 +00:00
'done' => 'Complete' ,
);
if ( isset ( $_REQUEST [ 'page' ])) { displayWizard ( $pages ); }
else { // initial display of the wizard, show the whole page
2008-11-03 21:47:38 +00:00
insertHeader ( 'Discover New Nodes' , array ( 'discover.css' , " $TOPDIR /lib/wizard.css " ), array ( " $TOPDIR /lib/wizard.js " ), array ( 'machines' , 'discover' ));
2008-10-17 01:45:03 +00:00
echo " <div id=content align=center> \n " ;
displayWizard ( $pages );
echo " </div> \n " ; // end the content div
insertFooter ();
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
// Save the values sent up from the previous wizard page into the session.
function savePostVars () {
foreach ( $_POST as $k => $v ) {
if ( $k != 'action' && $k != 'page' ) { $_SESSION [ $k ] = $v ; }
}
}
//-----------------------------------------------------------------------------
// Expand the noderange for non-existing nodes
function expandNR ( $nr ) {
//todo: use xcatd to expand this. Change xcatd around line 998: } elsif ($req->{command}->[0] eq "noderange" and $req->{noderange}) {
// see pping as an example of the client/server for noderange expansion
$a = array ();
if ( empty ( $nr )) return $a ;
list ( $begin , $end ) = explode ( '-' , $nr );
$begParts = array ();
if ( ! preg_match ( '/^(\D+)(\d+)$/' , $begin , $begParts )) { msg ( 'E' , " Error in noderange syntax: $nr " ); return NULL ; }
$endParts = array ();
if ( ! preg_match ( '/^(\D+)(\d+)$/' , $end , $endParts )) { msg ( 'E' , " Error in noderange syntax: $nr " ); return NULL ; }
if ( $begParts [ 1 ] != $endParts [ 1 ]) { msg ( 'E' , " Error in noderange syntax: $nr " ); return NULL ; }
$numlen = strlen ( $begParts [ 2 ]);
for ( $i = $begParts [ 2 ]; $i <= $endParts [ 2 ]; $i ++ ) {
$istr = " $i " ;
if ( strlen ( $istr ) < $numlen ) { $istr = substr ( '000000' , 0 , $numlen - strlen ( $istr )) . $istr ; }
$a [] = " $begParts[1] $istr " ;
}
return $a ;
}
//-----------------------------------------------------------------------------
function intro ( $action , $step ) {
2008-10-17 01:45:03 +00:00
echo " <p>This wizard will guide you through the process of defining the naming conventions within your cluster, discovering the hardware on your network, and automatically defining it in the xCAT database. " ;
echo " Choose which type of hardware you want to discover, and then click Next.</p> \n " ;
2008-10-17 12:51:51 +00:00
// The least hacky way to get this list left justified, but have the block in the center, is to use a table. CSS snobs, just deal with it.
2008-11-03 21:47:38 +00:00
echo " <form><table class=WizardListTable><tr><td><ul class=NoBullet> \n " ;
echo " <li><label class=Disabled><input type=radio name=hwType value=systemx disabled> System x hardware (not implemented yet)</label></li> \n " ;
2008-10-29 13:57:19 +00:00
echo " <li><label><input type=radio name=hwType value=systemp checked> System p hardware (only partially implemented)</label></li> \n " ;
2008-11-03 21:47:38 +00:00
echo " </ul></td></tr></table></form> \n " ;
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function patterns ( $action , $step ) {
echo " <form><table cellspacing=5> \n " ;
2008-10-17 12:51:51 +00:00
echo " <tr><td colspan=2 class=Center><h3>Switch Patterns</h3></td></tr> \n " ;
2008-11-03 21:47:38 +00:00
echo " <tr><td class=Right><label for=switchHostname>Switch Hostname Pattern:</label></td><td class=Left><input type=text name=switchHostname id=switchHostname value=' " , @ $_SESSION [ 'switchHostname' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=switchIP>Switch IP Address Pattern:</label></td><td class=Left><input type=text name=switchIP id=switchIP value=' " , @ $_SESSION [ 'switchIP' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=portsPerSwitch>Number of Ports Per Switch:</label></td><td class=Left><input type=text name=portsPerSwitch id=portsPerSwitch value=' " , @ $_SESSION [ 'portsPerSwitch' ], " '></td></tr> \n " ;
2008-10-17 12:51:51 +00:00
echo " <tr><td colspan=2 class=Center><h3>HMCs</h3></td></tr> \n " ;
2008-11-03 21:47:38 +00:00
echo " <tr><td class=Right><label for=hmcHostname>HMC Hostname Pattern:</label></td><td class=Left><input type=text name=hmcHostname id=hmcHostname value=' " , @ $_SESSION [ 'hmcHostname' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=hmcIP>HMC IP Address Pattern:</label></td><td class=Left><input type=text name=hmcIP id=hmcIP value=' " , @ $_SESSION [ 'hmcIP' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=numCECs>Number of CECs per HMC:</label></td><td class=Left><input type=text name=numCECs id=numCECs value=' " , @ $_SESSION [ 'numCECs' ], " '></td></tr> \n " ;
2008-10-17 12:51:51 +00:00
echo " <tr><td colspan=2 class=Center><h3>Frame (BPA) Patterns</h3></td></tr> \n " ;
2008-11-03 21:47:38 +00:00
echo " <tr><td class=Right><label for=bpaHostname>BPA Hostname Pattern:</label></td><td class=Left><input type=text name=bpaHostname id=bpaHostname value=' " , @ $_SESSION [ 'bpaHostname' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=bpaIP>BPA IP Address Pattern:</label></td><td class=Left><input type=text name=bpaIP id=bpaIP value=' " , @ $_SESSION [ 'bpaIP' ], " '></td></tr> \n " ;
2008-10-17 12:51:51 +00:00
echo " <tr><td colspan=2 class=Center><h3>Drawer (FSP/CEC) Patterns</h3></td></tr> \n " ;
2008-11-03 21:47:38 +00:00
echo " <tr><td class=Right><label for=fspHostname>FSP Hostname Pattern:</label></td><td class=Left><input type=text name=fspHostname id=fspHostname value=' " , @ $_SESSION [ 'fspHostname' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=fspIP>FSP IP Address Pattern:</label></td><td class=Left><input type=text name=fspIP id=fspIP value=' " , @ $_SESSION [ 'fspIP' ], " '></td></tr> \n " ;
echo " </table></form> \n " ;
2008-10-17 01:45:03 +00:00
2008-10-17 12:51:51 +00:00
//todo: get HCP userids/pws from the user
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function patterns1b ( $action , $step ) {
//todo: do validation of all pages that have input
savePostVars ();
// Figure out how many switches there need to be
$hmcs = expandNR ( $_SESSION [ 'hmcHostname' ]);
$bpas = expandNR ( $_SESSION [ 'bpaHostname' ]);
$fsps = expandNR ( $_SESSION [ 'fspHostname' ]);
//echo "<p>", implode(',',$hmcs), "</p>\n";
$total = count ( $hmcs ) + count ( $bpas ) + count ( $fsps );
if ( ! $_SESSION [ 'portsPerSwitch' ]) { $numswitches = 1 ; }
else { $numswitches = ( integer ) ((( $total - 1 ) / $_SESSION [ 'portsPerSwitch' ]) + 1 ); }
//echo "<p>$numswitches</p>\n";
echo " <form><table cellspacing=5> \n " ;
echo " <tr><td colspan=2 class=Center><h3>Switch Port Assignments</h3></td></tr> \n " ;
$switches = expandNR ( $_SESSION [ 'switchHostname' ]);
//todo: if count($switches) != $numswitches, then we have a problem
foreach ( $switches as $k => $sw ) {
$num = $k + 1 ;
echo " <tr><td class=Right><label for=switchSequence $num >Switch Port Sequence for $sw :</label></td><td class=Left><input type=text name=switchSequence $num id=switchSequence $num value=' " , @ $_SESSION [ " switchSequence $num " ], " '></td></tr> \n " ;
}
echo " <tr><td colspan=2 class=Center><h3>Discovery Information</h3></td></tr> \n " ;
echo " <tr><td class=Right><label for=dynamicIP>Dynamic IP Range for DHCP:</label></td><td class=Left><input type=text size=30 name=dynamicIP id=dynamicIP value=' " , @ $_SESSION [ " dynamicIP " ], " '></td></tr> \n " ;
echo " </table></form> \n " ;
}
//-----------------------------------------------------------------------------
function patterns2 ( $action , $step ) {
savePostVars ();
echo " <form><table cellspacing=5> \n " ;
// For now, many of the BB fields are disabled
echo " <tr><td colspan=2 class=Center><h3 class=Disabled>Building Blocks</h3></td></tr> \n " ;
echo " <tr><td class=Right><label for=numFrames class=Disabled>Number of Frames per Building Block:</label></td><td class=Left><input type=text name=numFrames id=numFrames disabled></td></tr> \n " ;
echo " <tr><td class=Right><label for=subnet>Subnet Pattern for Cluster Mgmt LAN:</label></td><td class=Left><input type=text name=subnet id=subnet value=' " , @ $_SESSION [ 'subnet' ], " '></td></tr> " ;
echo " <tr><td colspan=2 class='Center Disabled'>(Subnet address for nodes in each Building Block)</td></tr> \n " ;
echo " <tr><td class=Right><label for=ioNodename class=Disabled>I/O Node Name Pattern:</label></td><td class=Left><input type=text name=ioNodename id=ioNodename disabled></td></tr> \n " ;
echo " <tr><td class=Right><label for=computeNodename>Compute Node Name Pattern:</label></td><td class=Left><input type=text name=computeNodename id=computeNodename value=' " , @ $_SESSION [ 'computeNodename' ], " '></td></tr> \n " ;
echo " <tr><td class=Right><label for=hfiHostname class=Disabled>HFI NIC Hostname Pattern:</label></td><td class=Left><input type=text name=hfiHostname id=hfiHostname disabled></td></tr> \n " ;
echo " <tr><td class=Right><label for=hfiIP class=Disabled>HFI NIC IP Address Pattern:</label></td><td class=Left><input type=text name=hfiIP id=hfiIP disabled></td></tr> \n " ;
2008-10-17 12:51:51 +00:00
echo " <tr><td colspan=2 class=Center><h3>LPAR Information</h3></td></tr> \n " ;
2008-11-03 21:47:38 +00:00
echo " <tr><td class=Right><label for=numLPARs>Number of LPARs per Drawer:</label></td><td class=Left><input type=text name=numLPARs id=numLPARs value=' " , @ $_SESSION [ 'numLPARs' ], " '></td></tr> \n " ;
echo " </table></form> \n " ;
2008-10-17 01:45:03 +00:00
// do we need to get any info about the resources that should be in each lpar, or do we just divide them evenly?
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function preparemn ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-11-03 21:47:38 +00:00
if ( $step == 0 ) {
savePostVars ();
insertProgressTable ( array ( 'Write xCAT switch table.' ,
'Write xCAT hosts table.' ,
'Define networks.' ,
'Configure DHCP.' ,
));
if ( $action != 'back' ) { echo " <script type='text/javascript'>wizardStep(1,false,'');</script> " ; }
}
elseif ( $step == 1 ) { writeSwitchTable ( $step ); }
elseif ( $step == 2 ) { writeHostsTable ( $step ); }
elseif ( $step == 3 ) { setDynRange ( $_SESSION [ " dynamicIP " ], $step ); }
elseif ( $step == 4 ) { makedhcp ( $step ); }
}
//-----------------------------------------------------------------------------
// Using the hcp and switch ranges, write out the switch table
//todo: maybe should not use tabrestore in case we are just discovery additional hw
function writeSwitchTable ( $step ) {
$hmcs = expandNR ( $_SESSION [ 'hmcHostname' ]);
$bpas = expandNR ( $_SESSION [ 'bpaHostname' ]);
$fsps = expandNR ( $_SESSION [ 'fspHostname' ]);
$switches = expandNR ( $_SESSION [ 'switchHostname' ]);
$numports = $_SESSION [ 'portsPerSwitch' ];
$data = array ( array ( '#node,switch,port,vlan,interface,comments,disable' ));
//echo "<p>\n";
foreach ( $switches as $k => $sw ) {
$num = $k + 1 ;
$sequence = $_SESSION [ " switchSequence $num " ];
$seq = preg_split ( '/[\s,]+/' , $sequence );
$port = 1 ;
foreach ( $seq as $s ) { // each $s is something like: FSP:5
list ( $type , $num ) = explode ( ':' , $s );
if ( preg_match ( '/^hmc$/i' , $type )) $ar =& $hmcs ;
elseif ( preg_match ( '/^bpa$/i' , $type )) $ar =& $bpas ;
elseif ( preg_match ( '/^fsp$/i' , $type )) $ar =& $fsps ;
else { msg ( 'E' , " Invalid HW control point type in $s " ); return ; }
if ( $num == '*' ) { $num = count ( $ar ); }
for ( $i = 1 ; $i <= $num ; $i ++ ) {
$node = array_shift ( $ar );
$data [] = array ( $node , $sw , $port );
/* $xml = docmd ( 'nodeadd' , NULL , array ( $node , 'groups=all' , " switch.node= $node " , " switch.switch= $sw " , " switch.port= $port " ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodeadd failed: " . implode ( ' ' , $errors )); return ; }
else { echo " Wrote: $node , $sw , $port <br> \n " ; } */
if ( ++ $port > $numports ) break 2 ;
}
}
}
//echo "</p>\n"; ob_flush(); flush();
//array_unshift($data, array('#node,switch,port,vlan,interface,comments,disable'));
$xml = doTabrestore ( 'switch' , $data );
//$errors = array();
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " tabrestore switch failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
// Using the hcp ranges, write out the hosts table
function writeHostsTable ( $step ) {
$machines = array ();
$machines [ $_SESSION [ 'switchIP' ]] = expandNR ( $_SESSION [ 'switchHostname' ]);
$machines [ $_SESSION [ 'hmcIP' ]] = expandNR ( $_SESSION [ 'hmcHostname' ]);
$machines [ $_SESSION [ 'bpaIP' ]] = expandNR ( $_SESSION [ 'bpaHostname' ]);
$machines [ $_SESSION [ 'fspIP' ]] = expandNR ( $_SESSION [ 'fspHostname' ]);
$machines [ $_SESSION [ 'subnet' ]] = expandNR ( $_SESSION [ 'computeNodename' ]);
$data = array ( array ( '#node,ip,hostnames,comments,disable' ));
//echo "<p>\n";
foreach ( $machines as $ip => $ar ) { // this loop goes thru each type of hw
foreach ( $ar as $hostname ) { // this loop goes thru each of the hostnames for that type of hw
$data [] = array ( $hostname , $ip );
//echo "Wrote: $hostname,$ip<br>\n";
incrementIP ( $ip );
}
}
//echo "</p>\n"; ob_flush(); flush();
$xml = doTabrestore ( 'hosts' , $data );
$errors = array ();
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " tabrestore hosts failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function incrementIP ( & $ip ) {
$parts = explode ( '.' , $ip );
$parts [ 3 ] ++ ;
if ( $parts [ 3 ] >= 255 ) {
$parts [ 2 ] ++ ; $parts [ 3 ] = 1 ;
if ( $parts [ 3 ] >= 255 ) { $parts [ 1 ] ++ ; $parts [ 2 ] = 1 ; } // assume parts[1] is not 255, because we never increment the 1st field
}
$ip = implode ( '.' , $parts );
}
//-----------------------------------------------------------------------------
//todo: we need a better way to change the networks table than tabdump/tabrestore. We can not use chtab because its not client/svr. We can not use chdef because there is no netname defined by makenetworks.
function setDynRange ( $range , $step ) {
// Get the whole table via tabdump
$xml = docmd ( 'tabdump' , '' , array ( 'networks' ));
$data = array ();
foreach ( $xml -> children () as $response ) foreach ( $response -> children () as $line ) {
$line = ( string ) $line ;
if ( ereg ( " ^# " , $line )) { // handle the header specially
$data [] = array ( $line );
continue ;
}
$values = splitTableFields ( $line );
$values [ 8 ] = '"' . $range . '"' ; // dynamicrange is the 9th field
$data [] = $values ;
}
// Now restore that data back into the networks table
$xml = doTabrestore ( 'networks' , $data );
$errors = array ();
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " tabrestore networks failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function makedhcp ( $step ) {
$xml = docmd ( 'makedhcp' , NULL , array ( '-n' ));
$errors = array ();
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " makedhcp failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => TRUE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function prediscover ( $action , $step ) {
2008-10-17 12:51:51 +00:00
echo " <table class=WizardListTable><tr><td> \n " ;
echo " <p>Do the following manual steps now:</p> \n " ;
echo " <ol><li>Power on all of the HMCs.</li> \n " ;
echo " <li>Then power on all of frames.</li> \n " ;
echo " <li>Then click Next to discover the hardware on the service network.</li> \n " ;
echo " </ol></td></tr></table> \n " ;
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function discover ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-11-03 21:47:38 +00:00
if ( $step == 0 ) {
insertProgressTable ( array ( 'Discover HMCs, BPAs, and FSPs.' ));
if ( $action != 'back' ) { echo " <script type='text/javascript'>wizardStep(1,false,'');</script> " ; }
}
elseif ( $step == 1 ) { lsslp ( $step ); }
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
//todo: we are just simulating lsslp right now
function lsslp ( $step ) {
/* todo : show this
echo " <p> " ;
echo " Discovered HMCs: " , $_SESSION [ 'hmcHostname' ], " <br> \n " ;
echo " Discovered BPAs: " , $_SESSION [ 'bpaHostname' ], " <br> \n " ;
echo " Discovered FSPs: " , $_SESSION [ 'fspHostname' ], " <br> \n " ;
echo " </p> \n " ;
*/
//$errors = array();
$xml = docmd ( 'nodeadd' , NULL , array ( $_SESSION [ 'hmcHostname' ], 'groups=hmc,all' , 'nodetype.nodetype=hmc' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodeadd hmc failed: " . implode ( ' ' , $errors )); return ; }
$xml = docmd ( 'nodeadd' , NULL , array ( $_SESSION [ 'bpaHostname' ], 'groups=bpa,all' , 'nodetype.nodetype=bpa' , 'nodehm.mgt=hmc' , 'nodehm.power=hmc' , 'ppc.comments=bpa' , 'vpd.serial=|(\D+)(\d+)|($2)|' , 'vpd.mtm=|(\D+)(\d+)|($1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodeadd bpa failed: " . implode ( ' ' , $errors )); return ; }
// We are assuming there are 4 fsps in each bpa
$xml = docmd ( 'nodeadd' , NULL , array ( $_SESSION [ 'fspHostname' ], 'groups=fsp,all' , 'nodetype.nodetype=fsp' , 'nodehm.mgt=hmc' , 'nodehm.power=hmc' , 'ppc.id=|\D+(\d+)|((($1-1)%4)+1)|' , 'ppc.parent=|(\D+)(\d+)|b((($2-1)/4)+1)|' , 'vpd.serial=|(\D+)(\d+)|($2)|' , 'vpd.mtm=|(\D+)(\d+)|($1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodeadd fsp failed: " . implode ( ' ' , $errors )); return ; }
/*
$xml = docmd ( 'chdef' , NULL , array ( '-t' , 'group' , 'bpa' , 'serial=|(\D+)(\d+)|($2)|' , 'mtm=|(\D+)(\d+)|($1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " chdef bpa failed: " . implode ( ' ' , $errors )); return ; }
$xml = docmd ( 'chdef' , NULL , array ( '-t' , 'group' , 'fsp' , 'serial=|(\D+)(\d+)|($2)|' , 'mtm=|(\D+)(\d+)|($1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " chdef fsp failed: " . implode ( ' ' , $errors )); return ; }
*/
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => TRUE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function updatedefs ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-11-03 21:47:38 +00:00
if ( $step == 0 ) {
insertProgressTable ( array ( 'Determine which CECs each HMC should manage.' ,
'Create HW control point node groups.' ,
'Assign frame numbers.' ,
/* 'Assign supernode numbers and building block numbers.' ,
'Assign building block subnets.' , */
'Update name resolution.' ,
));
if ( $action != 'back' ) { echo " <script type='text/javascript'>wizardStep(1,false,'');</script> " ; }
}
elseif ( $step == 1 ) { assigncecs ( $step ); }
elseif ( $step == 2 ) { createhcpgroups ( $step ); }
elseif ( $step == 3 ) { assignframenums ( $step ); }
elseif ( $step == 4 ) { nameres ( $step ); }
}
//-----------------------------------------------------------------------------
function assigncecs ( $step ) {
$numCECs = $_SESSION [ 'numCECs' ];
$hmcs = expandNR ( $_SESSION [ 'hmcHostname' ]);
$bpas = expandNR ( $_SESSION [ 'bpaHostname' ]);
$fsps = expandNR ( $_SESSION [ 'fspHostname' ]);
$h = 0 ; // start with the 1st hmc
$f = 0 ;
$errors = array ();
// Go thru the fsps taking groups of numCECs and assigning them to the next hmc
while ( TRUE ) {
// Get the next group of fsps
$length = min ( $numCECs , count ( $fsps ) - $f );
$fslice = array_slice ( $fsps , $f , $length );
$xml = docmd ( 'nodech' , implode ( ',' , $fslice ), array ( " ppc.hcp= $hmcs[$h] " ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodech fsp failed: " . implode ( ' ' , $errors )); return ; }
// Decide if we are all out of fsps
$h ++ ;
$f += $length ;
if ( $h >= count ( $hmcs ) || $f >= count ( $fsps )) break ;
}
//todo: how do we decide what bpas to assign to which hmcs?
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function createhcpgroups ( $step ) {
//todo: may need to do this once we are using the real lsslp
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
// Give frame numbers to each bpa
function assignframenums ( $step ) {
$errors = array ();
$xml = docmd ( 'nodech' , 'bpa' , array ( 'ppc.id=|\D+(\d+)|($1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodech bpa failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
// Run makehosts and makedns
function nameres ( $step ) {
$errors = array ();
$xml = docmd ( 'makehosts' , NULL , NULL );
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " makehosts failed: " . implode ( ' ' , $errors )); return ; }
$xml = docmd ( 'makedns' , NULL , NULL );
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " makedns failed: " . implode ( ' ' , $errors )); return ; }
// Send JSON data back to the browser. Todo: handle the errors too.
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => TRUE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
function configurehcps ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-11-03 21:47:38 +00:00
if ( $step == 0 ) {
insertProgressTable ( array ( 'Assign CECs to their HMC.' ,
'Set frame numbers in BPAs.' ,
'Power on CECs to Standby.' ,
));
if ( $action != 'back' ) { echo " <script type='text/javascript'>wizardStep(1,false,'');</script> " ; }
}
elseif ( $step == 1 ) { cecs2hmcs ( $step ); }
elseif ( $step == 2 ) { setframenum ( $step ); }
elseif ( $step == 3 ) { cecs2standby ( $step ); }
2008-10-17 01:45:03 +00:00
//todo: set HCP userids/pws
}
2008-11-03 21:47:38 +00:00
function cecs2hmcs ( $step ) { echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));}
function setframenum ( $step ) { echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => FALSE , 'error' => '' ));}
function cecs2standby ( $step ) { echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => TRUE , 'error' => '' ));}
2008-10-17 01:45:03 +00:00
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function createnodes ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-11-03 21:47:38 +00:00
//todo: need to show progress for each CEC
if ( $step == 0 ) {
insertProgressTable ( array ( 'Create LPARs in each CEC and save node definitions in xCAT database.' ));
if ( $action != 'back' ) { echo " <script type='text/javascript'>wizardStep(1,false,'');</script> " ; }
}
elseif ( $step == 1 ) { createlpars ( $step ); }
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function createlpars ( $step ) {
$numlpars = $_SESSION [ 'numLPARs' ];
$fsps = expandNR ( $_SESSION [ 'fspHostname' ]);
$nodes = expandNR ( $_SESSION [ 'computeNodename' ]);
$samplenode = '' ; //todo: ???
$errors = array ();
$n = 0 ; // index into the nodes array
foreach ( $fsps as $f ) {
$length = min ( $numlpars , count ( $nodes ) - $n );
$nslice = array_slice ( $nodes , $n , $length );
//todo: actually make the lpars
//$xml = docmd('mkvm',NULL,array($samplenode,'-i','1','-n',implode(',',$nslice)));
//if (getXmlErrors($xml,$errors)) { msg('E',"mkvm failed: " . implode(' ',$errors)); return; }
// Decide if we are all out of nodes
$n += $length ;
if ( $n >= count ( $nodes )) break ;
}
//todo: Change this when mkvm is creating the base node definition.
// Also, the following assumes the node range starts with 1 and the fsp node range is simple.
// Really need to do individual nodeadd for each node.
$parts = array ();
preg_match ( '/^(\D+)/' , $_SESSION [ 'fspHostname' ], $parts );
$fsp = $parts [ 1 ];
$xml = docmd ( 'nodeadd' , NULL , array ( $_SESSION [ 'computeNodename' ], 'groups=lpar,all' , 'nodetype.nodetype=lpar,osi' ,
'nodehm.mgt=hmc' , 'nodehm.power=hmc' , 'nodehm.cons=hmc' , 'noderes.netboot=yaboot' ,
'nodetype.arch=ppc64' , 'ppc.id=|\D+(\d+)|((($1-1)%' . $numlpars . ')+1)|' ,
'ppc.parent=|(\D+)(\d+)|' . $fsp . '((($2-1)/' . $numlpars . ')+1)|' ));
if ( getXmlErrors ( $xml , $errors )) { msg ( 'E' , " nodeadd nodes failed: " . implode ( ' ' , $errors )); return ; }
echo json_encode ( array ( 'step' => ( integer ) ++ $step , 'done' => TRUE , 'error' => '' ));
}
//-----------------------------------------------------------------------------
// Currently not used.
function testhcps ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
2008-10-17 12:51:51 +00:00
echo " <table class=WizardProgressTable><ul> \n " ;
2008-11-03 21:47:38 +00:00
echo " <li><img id=chk src=' $TOPDIR /images/unchecked-box.gif'>(Output for rpower stat for sample nodes)</li> \n " ;
echo " <li><img id=chk src=' $TOPDIR /images/unchecked-box.gif'>(Output for rinv for sample nodes)</li> \n " ;
echo " <li><img id=chk src=' $TOPDIR /images/unchecked-box.gif'>(Output for rvitals for sample nodes)</li> \n " ;
2008-10-17 12:51:51 +00:00
echo " </ul></table> \n " ;
2008-10-17 01:45:03 +00:00
}
//-----------------------------------------------------------------------------
2008-11-03 21:47:38 +00:00
function done ( $action , $step ) {
2008-10-17 01:45:03 +00:00
global $TOPDIR ;
echo " <p id=wizardDone>Cluster set up successfully completed!</p> \n " ;
2008-10-17 12:51:51 +00:00
echo " <p>You can now <a href=' $TOPDIR /machines/groups.php'>view your node definitions</a> and start to <a href=' $TOPDIR /deploy/osimages.php'>deploy nodes</a>.</p> \n " ;
2008-10-17 01:45:03 +00:00
}
?>