xcat-core/xCAT/postscripts/configbond

#! /bin/bash
# IBM(c) 2014 EPL license http://www.eclipse.org/legal/epl-v10.html

# Usage:
# configbond bondname nic1@nic2@... [opt1@opt2@...]
#
# Description:
#   This script is used to configure bond interface base on the arguments from the 
#   command line and the network information from nics and networks tables.
#
#   This script will create bond interface named <bondname> with 'nic1','nic2'... as slave
#   devices. The bonding options 'opt1','opt2'... will be configured to bond interface.
#   
#   The network information for the bond interface will be gotten from the nics.nicsip and
#   nics.nicnetworks for interface <bondname>. If cannot get for <bondname>, try to 
#   search for nic1. If failed too, then nic2 ...
#   
#   It only supports to configure one bond device at each run. If you want to create
#   multiple bond devices, call it multiple times.
#
# Note:
#   This script only works for IPv4 so far.


# Following are examples of variables which are exported from mypostscript. Mostly, we need the nics and 
# networks related varirables which are exported from xcat nics and networks tables.
#   NICIPS=bond0!10.0.0.12
#   NICTYPES=bond0!Ethernet
#   NICHOSTNAMESUFFIXES=bond0!-bond0
#   NICNETWORKS=bond0!10_0_0_0-255_255_255_0
#   NICCUSTOMSCRIPTS=bond0!configbond 
#   NETWORKS_LINES=2
#   NETWORKS_LINE1=netname=10_0_0_0-255_255_255_0||net=10.0.0.0||mask=255.255.255.0||mgtifname=eth1||gateway=<xcatmaster>||dhcpserver=||tftpserver=10.0.0.10||nameservers=||ntpservers=||logservers=||dynamicrange=||staticrange=||staticrangeincrement=||nodehostname=||ddnsdomain=||vlanid=||domain=||disable=||comments=
#   NETWORKS_LINE2=netname=10_0_2_0-255_255_255_0||net=10.0.2.0||mask=255.255.255.0||mgtifname=eth0||gateway=10.0.2.2||dhcpserver=||tftpserver=10.0.2.15||nameservers=||ntpservers=||logservers=||dynamicrange=||staticrange=||staticrangeincrement=||nodehostname=||ddnsdomain=||vlanid=||domain=||disable=||comments=


# load library for network caculation
if [ "$(uname -s|tr 'A-Z' 'a-z')" = "linux" ];then
   str_dir_name=`dirname $0`
   . $str_dir_name/xcatlib.sh
fi

# Subroutine to display message and pass it to syslog
# Usage: showmsg "message to putput" ["error"]
function showmsg() {
    msg="configbond: $1"
    error=$2

    if [ -n "$error" ]; then
        $(logger -t xcat -p local4.err $msg)
    else
        $(logger -t xcat -p local4.info $msg)
    fi
    
    echo $msg
}

# Check OS version and get the directory of network configuration file
str_bond_name=''
str_os_type=`uname | tr 'A-Z' 'a-z'`
str_cfg_dir=''
str_temp=''
if [ "$str_os_type" = "linux" ];then
    str_temp=`echo $OSVER | grep -E '(sles|suse)'`
    if [ -f "/etc/redhat-release" ];then
        str_os_type="redhat"
        str_cfg_dir="/etc/sysconfig/network-scripts"
    elif [ -f "/etc/SuSE-release" -o -n "$str_temp" ];then
        str_os_type="sles"
        str_cfg_dir="/etc/sysconfig/network"
    else
        showmsg "Only supports RHEL and SLES" "error"
        exit -1
    fi
else
    showmsg "Does NOT support non-Linux Operating System" "error"
    exit -1 
fi


# Parse arguments
old_ifs=$IFS
IFS=$'@'

if [ $# -eq 2 ];then
    array_bond_opts="mode=4 miimon=100 downdelay=0 updelay=0 lacp_rate=fast xmit_hash_policy=1"
elif [ $# -eq 3 ]; then
    array_bond_opts=($3)
else
    showmsg "Only supports 2 or 3 arguments. Usage: configbond bondname nic1@nic2@... [opt1@opt2@...]"
    exit -1
fi

str_bond_name=$1
array_bond_slaves=($2)
IFS=$old_ifs

# examples of variables
#   str_bond_name=bond0
#   array_bond_slaves=(eth1 eth2)
#   array_bond_opts=(mode=1 miimon=100)

# Check the existence of slave devices and remove the inactive ones
realdevs=$(ip addr show 2>&1 | grep -E '^[1-9]' | cut -d: -f2)
for slave in ${array_bond_slaves[*]}; do
    active=0
    for rdev in $realdevs; do
        if [ $rdev = $slave ]; then
            active=1
        fi
    done
    if [ $active -eq 0 ]; then
        showmsg "Warning: device $slave does not exist. It will not be configured as a slave device."
        # remove the device from slave list
        allslaves=${array_bond_slaves[*]}
        allslaves=${allslaves/$slave/}
        array_bond_slaves=($allslaves)
    fi
done

if [ ${#array_bond_slaves[*]} -eq 0 ]; then
    showmsg "No available slave devices to use." "error"
    exit -1
fi

showmsg "Create bond interface $str_bond_name with slaves=\"${array_bond_slaves[*]}\" opts=\"${array_bond_opts[*]}\""

# Get bond device's IP address
str_bond_ip=""
if [ -z "$NICIPS" ]; then
    showmsg "Failed to get IP for bond interface: $str_bond_name. No IP is set in nics.nicips table."
    exit 1
else
    for devname in $str_bond_name ${array_bond_slaves[*]}; do    # for each "bondname nic1 nic2 ..."
        for ifipinfo in ${NICIPS//,/ }; do    # for each "ifname!ifip"
            old_ifs=$IFS
            IFS=$'!'
            arrayifinfo=($ifipinfo)    # [0] - ifname; [1] - if ip address
            IFS=$old_ifs

            if [ "$devname" = "${arrayifinfo[0]}" ]; then
                str_bond_ip=${arrayifinfo[1]}
                break 2
            fi
        done
    done
fi

# remove the left part from |. that means only keeping the first ip in the interface if there are alias ip
str_bond_ip=${str_bond_ip%%|*}

if [ -z "str_bond_ip" ]; then
    showmsg "Failed to get IP for $str_bond_name ${array_bond_slaves[*]} from $NICIPS"
    exit 1
fi

# Get the network and netmask info for the $str_bond_ip from networks table
str_bond_net=
str_bond_mask=
num_i=1
while [ $num_i -le $NETWORKS_LINES ];do
    eval str_bond_network=\$NETWORKS_LINE$num_i
    str_temp_net=${str_bond_network#*net=}    # remove the left part from 'net='
    str_temp_net=${str_temp_net%%|*}             # remove the right part from first '|'
    str_temp_mask=${str_bond_network#*mask=}    # remove the left part from 'mask='
    str_temp_mask=${str_temp_mask%%|*}             # remove the right part from first '|'
    
    str_temp_net1=$(v4calcnet $str_bond_ip $str_temp_mask)
    str_temp_net2=$(v4calcnet $str_temp_net $str_temp_mask)
    if [ "$str_temp_net1" = "$str_temp_net2" ];then
        str_bond_net=$str_temp_net
        str_bond_mask=$str_temp_mask
        break
    fi
    num_i=$((num_i+1))
done

if [ -z "$str_bond_net" ] || [ -z "$str_bond_mask" ]; then
    showmsg "Cannot find network information for bond IP $str_bond_ip from networks table." "error"
    exit 1
fi

showmsg "IP information for $str_bond_name: IP=$str_bond_ip; network=$str_bond_net; netmask=$str_bond_mask"

# Create bond config file

str_master_file="${str_cfg_dir}/ifcfg-${str_bond_name}"

if [ "$str_os_type" = "redhat" ];then
    # Create the master file
    cat > $str_master_file <<EOF
DEVICE=${str_bond_name}
BOOTPROTO=none
IPADDR=${str_bond_ip}
NETMASK=${str_bond_mask}
ONBOOT=yes
USERCTL=no
BONDING_OPTS="${array_bond_opts[*]}"
EOF

    # Create the slave files
    for slave in ${array_bond_slaves[*]}; do
        str_slave_file="${str_cfg_dir}/ifcfg-${slave}"
        cat > $str_slave_file <<EOF
DEVICE=${slave}
MASTER=${str_bond_name}
SLAVE=yes
BOOTPROTO=none
ONBOOT=yes
USERCTL=no
EOF
    done

elif [ "$str_os_type" = "sles" ];then
    # Create the master file
    cat > $str_master_file <<EOF
NAME='Bonded Interface'
BOOTPROTO=static
BONDING_MASTER=yes
IPADDR=${str_bond_ip}
NETMASK=${str_bond_mask}
STARTMODE=onboot
USERCONTROL=no
BONDING_MODULE_OPTS="${array_bond_opts[*]}"
EOF

   # Create the slave entries and files
   num_index=0
   for slave in ${array_bond_slaves[*]}; do
       # this is a special part to inject each slave device to master cfg
       echo "BONDING_SLAVE_${num_index}=$slave" >> $str_master_file
       num_index=$((num_index+1))

       str_slave_file="${str_cfg_dir}/ifcfg-${slave}"
       echo "BOOTPROTO=none" > $str_slave_file
       echo "STARTMODE=hotplug" >> $str_slave_file
   done
fi

# add bonding driver alias for <bondname>
echo "alias $str_bond_name bonding" > /etc/modprobe.d/$str_bond_name.conf

# Bring down the salve devices first
for slave in ${str_bond_name} ${array_bond_slaves[*]}; do
    $(ifdown $slave &>/dev/null)
done

# Bring up bond device
$(ifup ${str_bond_name} &>/dev/null)

if [ $? -ne 0 ]; then
    showmsg "Failed to bring up $str_bond_name" "error"
    exit 1
fi

showmsg "Finished the configuration for bond interface $str_bond_name"
exit 0