Initial commit of files

Signed-off-by: Arif Ali <mail@arif-ali.co.uk>
2014-09-24 20:40:46 +01:00
commit 86a59e7ede
41 changed files with 2171 additions and 0 deletions
--- a/packstack/packstack-answers-aali.txt
+++ b/packstack/packstack-answers-aali.txt
@ -0,0 +1,503 @@
+[general]
+
+# Path to a Public key to install on servers. If a usable key has not
+# been installed on the remote servers the user will be prompted for a
+# password and this key will be installed so the password will not be
+# required again
+CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
+
+# Set to 'y' if you would like Packstack to install MySQL
+CONFIG_MYSQL_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Image
+# Service (Glance)
+CONFIG_GLANCE_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Block
+# Storage (Cinder)
+CONFIG_CINDER_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Compute
+# (Nova)
+CONFIG_NOVA_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Networking (Neutron). Otherwise Nova Network will be used.
+CONFIG_NEUTRON_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Dashboard (Horizon)
+CONFIG_HORIZON_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Object
+# Storage (Swift)
+CONFIG_SWIFT_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Metering (Ceilometer)
+CONFIG_CEILOMETER_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Orchestration (Heat)
+CONFIG_HEAT_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install the OpenStack
+# Client packages. An admin "rc" file will also be installed
+CONFIG_CLIENT_INSTALL=y
+
+# Comma separated list of NTP servers. Leave plain if Packstack
+# should not install ntpd on instances.
+CONFIG_NTP_SERVERS=
+
+# Set to 'y' if you would like Packstack to install Nagios to monitor
+# OpenStack hosts
+CONFIG_NAGIOS_INSTALL=n
+
+# Comma separated list of servers to be excluded from installation in
+# case you are running Packstack the second time with the same answer
+# file and don't want Packstack to touch these servers. Leave plain if
+# you don't need to exclude any server.
+EXCLUDE_SERVERS=
+
+# Set to 'y' if you want to run OpenStack services in debug mode.
+# Otherwise set to 'n'.
+CONFIG_DEBUG_MODE=n
+
+# The IP address of the server on which to install OpenStack services
+# specific to controller role such as API servers, Horizon, etc.
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+
+# The list of IP addresses of the server on which to install the Nova
+# compute service
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+
+# The list of IP addresses of the server on which to install the
+# network service such as Nova network or Neutron
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+
+# Set to 'y' if you want to use VMware vCenter as hypervisor and
+# storage. Otherwise set to 'n'.
+CONFIG_VMWARE_BACKEND=n
+
+# The IP address of the VMware vCenter server
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+
+# The username to authenticate to VMware vCenter server
+CONFIG_VCENTER_USER=
+
+# The password to authenticate to VMware vCenter server
+CONFIG_VCENTER_PASSWORD=
+
+# The name of the vCenter cluster
+CONFIG_VCENTER_CLUSTER_NAME=
+
+# To subscribe each server to EPEL enter "y"
+CONFIG_USE_EPEL=n
+
+# A comma separated list of URLs to any additional yum repositories
+# to install
+CONFIG_REPO=
+
+# To subscribe each server with Red Hat subscription manager, include
+# this with CONFIG_RH_PW
+CONFIG_RH_USER=
+
+# To subscribe each server with Red Hat subscription manager, include
+# this with CONFIG_RH_USER
+CONFIG_RH_PW=
+
+# To enable RHEL optional repos use value "y"
+CONFIG_RH_OPTIONAL=y
+
+# To subscribe each server with RHN Satellite,fill Satellite's URL
+# here. Note that either satellite's username/password or activation
+# key has to be provided
+CONFIG_SATELLITE_URL=
+
+# Username to access RHN Satellite
+CONFIG_SATELLITE_USER=
+
+# Password to access RHN Satellite
+CONFIG_SATELLITE_PW=
+
+# Activation key for subscription to RHN Satellite
+CONFIG_SATELLITE_AKEY=
+
+# Specify a path or URL to a SSL CA certificate to use
+CONFIG_SATELLITE_CACERT=
+
+# If required specify the profile name that should be used as an
+# identifier for the system in RHN Satellite
+CONFIG_SATELLITE_PROFILE=
+
+# Comma separated list of flags passed to rhnreg_ks. Valid flags are:
+# novirtinfo, norhnsd, nopackages
+CONFIG_SATELLITE_FLAGS=
+
+# Specify a HTTP proxy to use with RHN Satellite
+CONFIG_SATELLITE_PROXY=
+
+# Specify a username to use with an authenticated HTTP proxy
+CONFIG_SATELLITE_PROXY_USER=
+
+# Specify a password to use with an authenticated HTTP proxy.
+CONFIG_SATELLITE_PROXY_PW=
+
+# Set the AMQP service backend. Allowed values are: qpid, rabbitmq
+CONFIG_AMQP_BACKEND=rabbitmq
+
+# The IP address of the server on which to install the AMQP service
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+
+# Enable SSL for the AMQP service
+CONFIG_AMQP_ENABLE_SSL=n
+
+# Enable Authentication for the AMQP service
+CONFIG_AMQP_ENABLE_AUTH=n
+
+# The password for the NSS certificate database of the AMQP service
+CONFIG_AMQP_NSS_CERTDB_PW=f0b6acd5054c43c7afa1c33f563e9d0a
+
+# The port in which the AMQP service listens to SSL connections
+CONFIG_AMQP_SSL_PORT=5671
+
+# The filename of the certificate that the AMQP service is going to
+# use
+CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
+
+# The filename of the private key that the AMQP service is going to
+# use
+CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
+
+# Auto Generates self signed SSL certificate and key
+CONFIG_AMQP_SSL_SELF_SIGNED=y
+
+# User for amqp authentication
+CONFIG_AMQP_AUTH_USER=amqp_user
+
+# Password for user authentication
+CONFIG_AMQP_AUTH_PASSWORD=728c1ff2fcf148d4
+
+# The IP address of the server on which to install MySQL or IP
+# address of DB server to use if MySQL installation was not selected
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+
+# Username for the MySQL admin user
+CONFIG_MYSQL_USER=root
+
+# Password for the MySQL admin user
+CONFIG_MYSQL_PW=319fae3b53744e31
+
+# The password to use for the Keystone to access DB
+CONFIG_KEYSTONE_DB_PW=a659bf672e4d4f22
+
+# The token to use for the Keystone service api
+CONFIG_KEYSTONE_ADMIN_TOKEN=754396839efa495ba055c85776b70820
+
+# The password to use for the Keystone admin user
+CONFIG_KEYSTONE_ADMIN_PW=570dd01940b84b35
+
+# The password to use for the Keystone demo user
+CONFIG_KEYSTONE_DEMO_PW=9b6e5dfbb2b144a7
+
+# Kestone token format. Use either UUID or PKI
+CONFIG_KEYSTONE_TOKEN_FORMAT=PKI
+
+# The password to use for the Glance to access DB
+CONFIG_GLANCE_DB_PW=611d0dddefd34aee
+
+# The password to use for the Glance to authenticate with Keystone
+CONFIG_GLANCE_KS_PW=8d56529eead24bd0
+
+# The password to use for the Cinder to access DB
+CONFIG_CINDER_DB_PW=77bf5c95a5e04ba2
+
+# The password to use for the Cinder to authenticate with Keystone
+CONFIG_CINDER_KS_PW=076a9a22343b4733
+
+# The Cinder backend to use, valid options are: lvm, gluster, nfs
+CONFIG_CINDER_BACKEND=lvm
+
+# Create Cinder's volumes group. This should only be done for testing
+# on a proof-of-concept installation of Cinder. This will create a
+# file-backed volume group and is not suitable for production usage.
+CONFIG_CINDER_VOLUMES_CREATE=y
+
+# Cinder's volumes group size. Note that actual volume size will be
+# extended with 3% more space for VG metadata.
+CONFIG_CINDER_VOLUMES_SIZE=20G
+
+# A single or comma separated list of gluster volume shares to mount,
+# eg: ip-address:/vol-name, domain:/vol-name
+CONFIG_CINDER_GLUSTER_MOUNTS=
+
+# A single or comma seprated list of NFS exports to mount, eg: ip-
+# address:/export-name
+CONFIG_CINDER_NFS_MOUNTS=
+
+# The password to use for the Nova to access DB
+CONFIG_NOVA_DB_PW=7cbfd80d43c94d74
+
+# The password to use for the Nova to authenticate with Keystone
+CONFIG_NOVA_KS_PW=88f81273f4dd487f
+
+# The overcommitment ratio for virtual to physical CPUs. Set to 1.0
+# to disable CPU overcommitment
+CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
+
+# The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
+# disable RAM overcommitment
+CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
+
+# Private interface for Flat DHCP on the Nova compute servers
+CONFIG_NOVA_COMPUTE_PRIVIF=lo
+
+# Nova network manager
+CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
+
+# Public interface on the Nova network server
+CONFIG_NOVA_NETWORK_PUBIF=enp2s1f0
+
+# Private interface for network manager on the Nova network server
+CONFIG_NOVA_NETWORK_PRIVIF=enp2s1f1
+
+# IP Range for network manager
+CONFIG_NOVA_NETWORK_FIXEDRANGE=10.0.0.0/24
+
+# IP Range for Floating IP's
+CONFIG_NOVA_NETWORK_FLOATRANGE=192.168.33.0/24
+
+# Name of the default floating pool to which the specified floating
+# ranges are added to
+CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
+
+# Automatically assign a floating IP to new instances
+CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
+
+# First VLAN for private networks
+CONFIG_NOVA_NETWORK_VLAN_START=100
+
+# Number of networks to support
+CONFIG_NOVA_NETWORK_NUMBER=1
+
+# Number of addresses in each private subnet
+CONFIG_NOVA_NETWORK_SIZE=255
+
+# The password to use for Neutron to authenticate with Keystone
+CONFIG_NEUTRON_KS_PW=39f95ea7d0564478
+
+# The password to use for Neutron to access DB
+CONFIG_NEUTRON_DB_PW=fd538aa5046544ab
+
+# The name of the bridge that the Neutron L3 agent will use for
+# external traffic, or 'provider' if using provider networks
+CONFIG_NEUTRON_L3_EXT_BRIDGE=provider
+
+# The name of the L2 plugin to be used with Neutron
+CONFIG_NEUTRON_L2_PLUGIN=ml2
+
+# Neutron metadata agent password
+CONFIG_NEUTRON_METADATA_PW=31e36f06e240407b
+
+# Set to 'y' if you would like Packstack to install Neutron LBaaS
+CONFIG_LBAAS_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install Neutron L3
+# Metering agent
+CONFIG_NEUTRON_METERING_AGENT_INSTALL=n
+
+# Whether to configure neutron Firewall as a Service
+CONFIG_NEUTRON_FWAAS=n
+
+# A comma separated list of network type driver entrypoints to be
+# loaded from the neutron.ml2.type_drivers namespace.
+CONFIG_NEUTRON_ML2_TYPE_DRIVERS=gre,flat
+
+# A comma separated ordered list of network_types to allocate as
+# tenant networks. The value 'local' is only useful for single-box
+# testing but provides no connectivity between hosts.
+CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=gre
+
+# A comma separated ordered list of networking mechanism driver
+# entrypoints to be loaded from the neutron.ml2.mechanism_drivers
+# namespace.
+CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
+
+# A comma separated  list of physical_network names with which flat
+# networks can be created. Use * to allow flat networks with arbitrary
+# physical_network names.
+CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
+
+# A comma separated list of <physical_network>:<vlan_min>:<vlan_max>
+# or <physical_network> specifying physical_network names usable for
+# VLAN provider and tenant networks, as well as ranges of VLAN tags on
+# each available for allocation to tenant networks.
+CONFIG_NEUTRON_ML2_VLAN_RANGES=physnet_ocfcust,physnet_stackint
+
+# A comma separated list of <tun_min>:<tun_max> tuples enumerating
+# ranges of GRE tunnel IDs that are available for tenant network
+# allocation. Should be an array with tun_max +1 - tun_min > 1000000
+CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=
+
+# Multicast group for VXLAN. If unset, disables VXLAN enable sending
+# allocate broadcast traffic to this multicast group. When left
+# unconfigured, will disable multicast VXLAN mode. Should be an
+# Multicast IP (v4 or v6) address.
+CONFIG_NEUTRON_ML2_VXLAN_GROUP=
+
+# A comma separated list of <vni_min>:<vni_max> tuples enumerating
+# ranges of VXLAN VNI IDs that are available for tenant network
+# allocation. Min value is 0 and Max value is 16777215.
+CONFIG_NEUTRON_ML2_VNI_RANGES=10:100
+
+# The name of the L2 agent to be used with Neutron
+CONFIG_NEUTRON_L2_AGENT=openvswitch
+
+# The type of network to allocate for tenant networks (eg. vlan,
+# local)
+CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
+
+# A comma separated list of VLAN ranges for the Neutron linuxbridge
+# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
+CONFIG_NEUTRON_LB_VLAN_RANGES=physnet_ocfcust,physnet_stackint
+
+# A comma separated list of interface mappings for the Neutron
+# linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
+# :br-eth3)
+CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=physnet_ocfcust:br-ocfcust,physnet_stackint:br-stackint
+
+# Type of network to allocate for tenant networks (eg. vlan, local,
+# gre, vxlan)
+CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=gre
+
+# A comma separated list of VLAN ranges for the Neutron openvswitch
+# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
+CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet_ocfcust,physnet_stackint
+
+# A comma separated list of bridge mappings for the Neutron
+# openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
+# :br-eth3)
+CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet_ocfcust:br-ocfcust,physnet_stackint:br-stackint
+
+# A comma separated list of colon-separated OVS bridge:interface
+# pairs. The interface will be added to the associated bridge.
+CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-ocfcust:enp2s1f1,br-stackint:enp2s1f0
+
+# A comma separated list of tunnel ranges for the Neutron openvswitch
+# plugin (eg. 1:1000)
+CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1:1000
+
+# The interface for the OVS tunnel. Packstack will override the IP
+# address used for tunnels on this hypervisor to the IP found on the
+# specified interface. (eg. eth1)
+CONFIG_NEUTRON_OVS_TUNNEL_IF=enp2s1f0
+
+# VXLAN UDP port
+CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
+
+# To set up Horizon communication over https set this to 'y'
+CONFIG_HORIZON_SSL=n
+
+# PEM encoded certificate to be used for ssl on the https server,
+# leave blank if one should be generated, this certificate should not
+# require a passphrase
+CONFIG_SSL_CERT=
+
+# SSL keyfile corresponding to the certificate if one was entered
+CONFIG_SSL_KEY=
+
+# PEM encoded CA certificates from which the certificate chain of the
+# server certificate can be assembled.
+CONFIG_SSL_CACHAIN=
+
+# The password to use for the Swift to authenticate with Keystone
+CONFIG_SWIFT_KS_PW=c08a7bb1ab92457a
+
+# A comma separated list of devices which to use as Swift Storage
+# device. Each entry should take the format /path/to/dev, for example
+# /dev/vdb will install /dev/vdb as Swift storage device (packstack
+# does not create the filesystem, you must do this first). If value is
+# omitted Packstack will create a loopback device for test setup
+CONFIG_SWIFT_STORAGES=
+
+# Number of swift storage zones, this number MUST be no bigger than
+# the number of storage devices configured
+CONFIG_SWIFT_STORAGE_ZONES=1
+
+# Number of swift storage replicas, this number MUST be no bigger
+# than the number of storage zones configured
+CONFIG_SWIFT_STORAGE_REPLICAS=1
+
+# FileSystem type for storage nodes
+CONFIG_SWIFT_STORAGE_FSTYPE=ext4
+
+# Shared secret for Swift
+CONFIG_SWIFT_HASH=8df5b55cb0764613
+
+# Size of the swift loopback file storage device
+CONFIG_SWIFT_STORAGE_SIZE=2G
+
+# Whether to provision for demo usage and testing. Note that
+# provisioning is only supported for all-in-one installations.
+CONFIG_PROVISION_DEMO=n
+
+# Whether to configure tempest for testing
+CONFIG_PROVISION_TEMPEST=n
+
+# The name of the Tempest Provisioning user. If you don't provide a
+# user name, Tempest will be configured in a standalone mode
+CONFIG_PROVISION_TEMPEST_USER=
+
+# The password to use for the Tempest Provisioning user
+CONFIG_PROVISION_TEMPEST_USER_PW=09ca53eaf69446d8
+
+# The CIDR network address for the floating IP subnet
+CONFIG_PROVISION_DEMO_FLOATRANGE=192.168.33.0/24
+
+# The uri of the tempest git repository to use
+CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
+
+# The revision of the tempest git repository to use
+CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
+
+# Whether to configure the ovs external bridge in an all-in-one
+# deployment
+CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
+
+# The password used by Heat user to authenticate against MySQL
+CONFIG_HEAT_DB_PW=51fe4152d696444c
+
+# The encryption key to use for authentication info in database
+CONFIG_HEAT_AUTH_ENC_KEY=2ec055ce175c4cd2
+
+# The password to use for the Heat to authenticate with Keystone
+CONFIG_HEAT_KS_PW=9de88192682742ae
+
+# Set to 'y' if you would like Packstack to install Heat CloudWatch
+# API
+CONFIG_HEAT_CLOUDWATCH_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install Heat
+# CloudFormation API
+CONFIG_HEAT_CFN_INSTALL=n
+
+# Name of Keystone domain for Heat
+CONFIG_HEAT_DOMAIN=heat
+
+# Name of Keystone domain admin user for Heat
+CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
+
+# Password for Keystone domain admin user for Heat
+CONFIG_HEAT_DOMAIN_PASSWORD=99ac906641844f27
+
+# Secret key for signing metering messages
+CONFIG_CEILOMETER_SECRET=82fd834fdfd74dcb
+
+# The password to use for Ceilometer to authenticate with Keystone
+CONFIG_CEILOMETER_KS_PW=c053923e1a564e69
+
+# The IP address of the server on which to install MongoDB
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+# The password of the nagiosadmin user on the Nagios server
+CONFIG_NAGIOS_PW=c8e697956bcf49ab
--- a/packstack/packstack-answers-multi.txt
+++ b/packstack/packstack-answers-multi.txt
@ -0,0 +1,29 @@
+[general]
+CONFIG_NTP_SERVERS=192.168.33.200
+CONFIG_KEYSTONE_ADMIN_PW=openstack
+CONFIG_USE_EPEL=n
+
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+CONFIG_HORIZON_SSL=y
+CONFIG_PROVISION_DEMO=n
+
+CONFIG_CEILOMETER_INSTALL=n
+CONFIG_NAGIOS_INSTALL=n
+CONFIG_SWIFT_INSTALL=n
+
+CONFIG_NEUTRON_L2_PLUGIN=ml2
+CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vlan
+CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vlan
+CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
+CONFIG_NEUTRON_ML2_VLAN_RANGES=physnet_xcat:1000:2000
+CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vlan
+CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet_xcat:1000:2000
+CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet_xcat:br-xcat
+CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-xcat:enp2s1f0
--- a/packstack/packstack-answers-orig.txt
+++ b/packstack/packstack-answers-orig.txt
@ -0,0 +1,503 @@
+[general]
+
+# Path to a Public key to install on servers. If a usable key has not
+# been installed on the remote servers the user will be prompted for a
+# password and this key will be installed so the password will not be
+# required again
+CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
+
+# Set to 'y' if you would like Packstack to install MySQL
+CONFIG_MYSQL_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Image
+# Service (Glance)
+CONFIG_GLANCE_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Block
+# Storage (Cinder)
+CONFIG_CINDER_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Compute
+# (Nova)
+CONFIG_NOVA_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Networking (Neutron). Otherwise Nova Network will be used.
+CONFIG_NEUTRON_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Dashboard (Horizon)
+CONFIG_HORIZON_INSTALL=y
+
+# Set to 'y' if you would like Packstack to install OpenStack Object
+# Storage (Swift)
+CONFIG_SWIFT_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Metering (Ceilometer)
+CONFIG_CEILOMETER_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install OpenStack
+# Orchestration (Heat)
+CONFIG_HEAT_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install the OpenStack
+# Client packages. An admin "rc" file will also be installed
+CONFIG_CLIENT_INSTALL=y
+
+# Comma separated list of NTP servers. Leave plain if Packstack
+# should not install ntpd on instances.
+CONFIG_NTP_SERVERS=
+
+# Set to 'y' if you would like Packstack to install Nagios to monitor
+# OpenStack hosts
+CONFIG_NAGIOS_INSTALL=n
+
+# Comma separated list of servers to be excluded from installation in
+# case you are running Packstack the second time with the same answer
+# file and don't want Packstack to touch these servers. Leave plain if
+# you don't need to exclude any server.
+EXCLUDE_SERVERS=
+
+# Set to 'y' if you want to run OpenStack services in debug mode.
+# Otherwise set to 'n'.
+CONFIG_DEBUG_MODE=n
+
+# The IP address of the server on which to install OpenStack services
+# specific to controller role such as API servers, Horizon, etc.
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+
+# The list of IP addresses of the server on which to install the Nova
+# compute service
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+
+# The list of IP addresses of the server on which to install the
+# network service such as Nova network or Neutron
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+
+# Set to 'y' if you want to use VMware vCenter as hypervisor and
+# storage. Otherwise set to 'n'.
+CONFIG_VMWARE_BACKEND=n
+
+# The IP address of the VMware vCenter server
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+
+# The username to authenticate to VMware vCenter server
+CONFIG_VCENTER_USER=
+
+# The password to authenticate to VMware vCenter server
+CONFIG_VCENTER_PASSWORD=
+
+# The name of the vCenter cluster
+CONFIG_VCENTER_CLUSTER_NAME=
+
+# To subscribe each server to EPEL enter "y"
+CONFIG_USE_EPEL=n
+
+# A comma separated list of URLs to any additional yum repositories
+# to install
+CONFIG_REPO=
+
+# To subscribe each server with Red Hat subscription manager, include
+# this with CONFIG_RH_PW
+CONFIG_RH_USER=
+
+# To subscribe each server with Red Hat subscription manager, include
+# this with CONFIG_RH_USER
+CONFIG_RH_PW=
+
+# To enable RHEL optional repos use value "y"
+CONFIG_RH_OPTIONAL=y
+
+# To subscribe each server with RHN Satellite,fill Satellite's URL
+# here. Note that either satellite's username/password or activation
+# key has to be provided
+CONFIG_SATELLITE_URL=
+
+# Username to access RHN Satellite
+CONFIG_SATELLITE_USER=
+
+# Password to access RHN Satellite
+CONFIG_SATELLITE_PW=
+
+# Activation key for subscription to RHN Satellite
+CONFIG_SATELLITE_AKEY=
+
+# Specify a path or URL to a SSL CA certificate to use
+CONFIG_SATELLITE_CACERT=
+
+# If required specify the profile name that should be used as an
+# identifier for the system in RHN Satellite
+CONFIG_SATELLITE_PROFILE=
+
+# Comma separated list of flags passed to rhnreg_ks. Valid flags are:
+# novirtinfo, norhnsd, nopackages
+CONFIG_SATELLITE_FLAGS=
+
+# Specify a HTTP proxy to use with RHN Satellite
+CONFIG_SATELLITE_PROXY=
+
+# Specify a username to use with an authenticated HTTP proxy
+CONFIG_SATELLITE_PROXY_USER=
+
+# Specify a password to use with an authenticated HTTP proxy.
+CONFIG_SATELLITE_PROXY_PW=
+
+# Set the AMQP service backend. Allowed values are: qpid, rabbitmq
+CONFIG_AMQP_BACKEND=rabbitmq
+
+# The IP address of the server on which to install the AMQP service
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+
+# Enable SSL for the AMQP service
+CONFIG_AMQP_ENABLE_SSL=n
+
+# Enable Authentication for the AMQP service
+CONFIG_AMQP_ENABLE_AUTH=n
+
+# The password for the NSS certificate database of the AMQP service
+CONFIG_AMQP_NSS_CERTDB_PW=f0b6acd5054c43c7afa1c33f563e9d0a
+
+# The port in which the AMQP service listens to SSL connections
+CONFIG_AMQP_SSL_PORT=5671
+
+# The filename of the certificate that the AMQP service is going to
+# use
+CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
+
+# The filename of the private key that the AMQP service is going to
+# use
+CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
+
+# Auto Generates self signed SSL certificate and key
+CONFIG_AMQP_SSL_SELF_SIGNED=y
+
+# User for amqp authentication
+CONFIG_AMQP_AUTH_USER=amqp_user
+
+# Password for user authentication
+CONFIG_AMQP_AUTH_PASSWORD=728c1ff2fcf148d4
+
+# The IP address of the server on which to install MySQL or IP
+# address of DB server to use if MySQL installation was not selected
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+
+# Username for the MySQL admin user
+CONFIG_MYSQL_USER=root
+
+# Password for the MySQL admin user
+CONFIG_MYSQL_PW=319fae3b53744e31
+
+# The password to use for the Keystone to access DB
+CONFIG_KEYSTONE_DB_PW=a659bf672e4d4f22
+
+# The token to use for the Keystone service api
+CONFIG_KEYSTONE_ADMIN_TOKEN=754396839efa495ba055c85776b70820
+
+# The password to use for the Keystone admin user
+CONFIG_KEYSTONE_ADMIN_PW=570dd01940b84b35
+
+# The password to use for the Keystone demo user
+CONFIG_KEYSTONE_DEMO_PW=9b6e5dfbb2b144a7
+
+# Kestone token format. Use either UUID or PKI
+CONFIG_KEYSTONE_TOKEN_FORMAT=PKI
+
+# The password to use for the Glance to access DB
+CONFIG_GLANCE_DB_PW=611d0dddefd34aee
+
+# The password to use for the Glance to authenticate with Keystone
+CONFIG_GLANCE_KS_PW=8d56529eead24bd0
+
+# The password to use for the Cinder to access DB
+CONFIG_CINDER_DB_PW=77bf5c95a5e04ba2
+
+# The password to use for the Cinder to authenticate with Keystone
+CONFIG_CINDER_KS_PW=076a9a22343b4733
+
+# The Cinder backend to use, valid options are: lvm, gluster, nfs
+CONFIG_CINDER_BACKEND=lvm
+
+# Create Cinder's volumes group. This should only be done for testing
+# on a proof-of-concept installation of Cinder. This will create a
+# file-backed volume group and is not suitable for production usage.
+CONFIG_CINDER_VOLUMES_CREATE=y
+
+# Cinder's volumes group size. Note that actual volume size will be
+# extended with 3% more space for VG metadata.
+CONFIG_CINDER_VOLUMES_SIZE=20G
+
+# A single or comma separated list of gluster volume shares to mount,
+# eg: ip-address:/vol-name, domain:/vol-name
+CONFIG_CINDER_GLUSTER_MOUNTS=
+
+# A single or comma seprated list of NFS exports to mount, eg: ip-
+# address:/export-name
+CONFIG_CINDER_NFS_MOUNTS=
+
+# The password to use for the Nova to access DB
+CONFIG_NOVA_DB_PW=7cbfd80d43c94d74
+
+# The password to use for the Nova to authenticate with Keystone
+CONFIG_NOVA_KS_PW=88f81273f4dd487f
+
+# The overcommitment ratio for virtual to physical CPUs. Set to 1.0
+# to disable CPU overcommitment
+CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
+
+# The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
+# disable RAM overcommitment
+CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
+
+# Private interface for Flat DHCP on the Nova compute servers
+CONFIG_NOVA_COMPUTE_PRIVIF=lo
+
+# Nova network manager
+CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
+
+# Public interface on the Nova network server
+CONFIG_NOVA_NETWORK_PUBIF=enp2s1f0
+
+# Private interface for network manager on the Nova network server
+CONFIG_NOVA_NETWORK_PRIVIF=enp2s1f1
+
+# IP Range for network manager
+CONFIG_NOVA_NETWORK_FIXEDRANGE=10.0.0.0/24
+
+# IP Range for Floating IP's
+CONFIG_NOVA_NETWORK_FLOATRANGE=192.168.33.0/24
+
+# Name of the default floating pool to which the specified floating
+# ranges are added to
+CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
+
+# Automatically assign a floating IP to new instances
+CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
+
+# First VLAN for private networks
+CONFIG_NOVA_NETWORK_VLAN_START=100
+
+# Number of networks to support
+CONFIG_NOVA_NETWORK_NUMBER=1
+
+# Number of addresses in each private subnet
+CONFIG_NOVA_NETWORK_SIZE=255
+
+# The password to use for Neutron to authenticate with Keystone
+CONFIG_NEUTRON_KS_PW=39f95ea7d0564478
+
+# The password to use for Neutron to access DB
+CONFIG_NEUTRON_DB_PW=fd538aa5046544ab
+
+# The name of the bridge that the Neutron L3 agent will use for
+# external traffic, or 'provider' if using provider networks
+CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
+
+# The name of the L2 plugin to be used with Neutron
+CONFIG_NEUTRON_L2_PLUGIN=ml2
+
+# Neutron metadata agent password
+CONFIG_NEUTRON_METADATA_PW=31e36f06e240407b
+
+# Set to 'y' if you would like Packstack to install Neutron LBaaS
+CONFIG_LBAAS_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install Neutron L3
+# Metering agent
+CONFIG_NEUTRON_METERING_AGENT_INSTALL=n
+
+# Whether to configure neutron Firewall as a Service
+CONFIG_NEUTRON_FWAAS=n
+
+# A comma separated list of network type driver entrypoints to be
+# loaded from the neutron.ml2.type_drivers namespace.
+CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
+
+# A comma separated ordered list of network_types to allocate as
+# tenant networks. The value 'local' is only useful for single-box
+# testing but provides no connectivity between hosts.
+CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
+
+# A comma separated ordered list of networking mechanism driver
+# entrypoints to be loaded from the neutron.ml2.mechanism_drivers
+# namespace.
+CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
+
+# A comma separated  list of physical_network names with which flat
+# networks can be created. Use * to allow flat networks with arbitrary
+# physical_network names.
+CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
+
+# A comma separated list of <physical_network>:<vlan_min>:<vlan_max>
+# or <physical_network> specifying physical_network names usable for
+# VLAN provider and tenant networks, as well as ranges of VLAN tags on
+# each available for allocation to tenant networks.
+CONFIG_NEUTRON_ML2_VLAN_RANGES=physnet1
+
+# A comma separated list of <tun_min>:<tun_max> tuples enumerating
+# ranges of GRE tunnel IDs that are available for tenant network
+# allocation. Should be an array with tun_max +1 - tun_min > 1000000
+CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=
+
+# Multicast group for VXLAN. If unset, disables VXLAN enable sending
+# allocate broadcast traffic to this multicast group. When left
+# unconfigured, will disable multicast VXLAN mode. Should be an
+# Multicast IP (v4 or v6) address.
+CONFIG_NEUTRON_ML2_VXLAN_GROUP=
+
+# A comma separated list of <vni_min>:<vni_max> tuples enumerating
+# ranges of VXLAN VNI IDs that are available for tenant network
+# allocation. Min value is 0 and Max value is 16777215.
+CONFIG_NEUTRON_ML2_VNI_RANGES=10:100
+
+# The name of the L2 agent to be used with Neutron
+CONFIG_NEUTRON_L2_AGENT=openvswitch
+
+# The type of network to allocate for tenant networks (eg. vlan,
+# local)
+CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
+
+# A comma separated list of VLAN ranges for the Neutron linuxbridge
+# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
+CONFIG_NEUTRON_LB_VLAN_RANGES=physnet1
+
+# A comma separated list of interface mappings for the Neutron
+# linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
+# :br-eth3)
+CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=physnet1:br-ex
+
+# Type of network to allocate for tenant networks (eg. vlan, local,
+# gre, vxlan)
+CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=gre
+
+# A comma separated list of VLAN ranges for the Neutron openvswitch
+# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
+CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet1
+
+# A comma separated list of bridge mappings for the Neutron
+# openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
+# :br-eth3)
+CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex
+
+# A comma separated list of colon-separated OVS bridge:interface
+# pairs. The interface will be added to the associated bridge.
+CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
+
+# A comma separated list of tunnel ranges for the Neutron openvswitch
+# plugin (eg. 1:1000)
+CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1000:3000
+
+# The interface for the OVS tunnel. Packstack will override the IP
+# address used for tunnels on this hypervisor to the IP found on the
+# specified interface. (eg. eth1)
+CONFIG_NEUTRON_OVS_TUNNEL_IF=enp2s1f1
+
+# VXLAN UDP port
+CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
+
+# To set up Horizon communication over https set this to 'y'
+CONFIG_HORIZON_SSL=n
+
+# PEM encoded certificate to be used for ssl on the https server,
+# leave blank if one should be generated, this certificate should not
+# require a passphrase
+CONFIG_SSL_CERT=
+
+# SSL keyfile corresponding to the certificate if one was entered
+CONFIG_SSL_KEY=
+
+# PEM encoded CA certificates from which the certificate chain of the
+# server certificate can be assembled.
+CONFIG_SSL_CACHAIN=
+
+# The password to use for the Swift to authenticate with Keystone
+CONFIG_SWIFT_KS_PW=c08a7bb1ab92457a
+
+# A comma separated list of devices which to use as Swift Storage
+# device. Each entry should take the format /path/to/dev, for example
+# /dev/vdb will install /dev/vdb as Swift storage device (packstack
+# does not create the filesystem, you must do this first). If value is
+# omitted Packstack will create a loopback device for test setup
+CONFIG_SWIFT_STORAGES=
+
+# Number of swift storage zones, this number MUST be no bigger than
+# the number of storage devices configured
+CONFIG_SWIFT_STORAGE_ZONES=1
+
+# Number of swift storage replicas, this number MUST be no bigger
+# than the number of storage zones configured
+CONFIG_SWIFT_STORAGE_REPLICAS=1
+
+# FileSystem type for storage nodes
+CONFIG_SWIFT_STORAGE_FSTYPE=ext4
+
+# Shared secret for Swift
+CONFIG_SWIFT_HASH=8df5b55cb0764613
+
+# Size of the swift loopback file storage device
+CONFIG_SWIFT_STORAGE_SIZE=2G
+
+# Whether to provision for demo usage and testing. Note that
+# provisioning is only supported for all-in-one installations.
+CONFIG_PROVISION_DEMO=n
+
+# Whether to configure tempest for testing
+CONFIG_PROVISION_TEMPEST=n
+
+# The name of the Tempest Provisioning user. If you don't provide a
+# user name, Tempest will be configured in a standalone mode
+CONFIG_PROVISION_TEMPEST_USER=
+
+# The password to use for the Tempest Provisioning user
+CONFIG_PROVISION_TEMPEST_USER_PW=09ca53eaf69446d8
+
+# The CIDR network address for the floating IP subnet
+CONFIG_PROVISION_DEMO_FLOATRANGE=192.168.33.0/24
+
+# The uri of the tempest git repository to use
+CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
+
+# The revision of the tempest git repository to use
+CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
+
+# Whether to configure the ovs external bridge in an all-in-one
+# deployment
+CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=y
+
+# The password used by Heat user to authenticate against MySQL
+CONFIG_HEAT_DB_PW=51fe4152d696444c
+
+# The encryption key to use for authentication info in database
+CONFIG_HEAT_AUTH_ENC_KEY=2ec055ce175c4cd2
+
+# The password to use for the Heat to authenticate with Keystone
+CONFIG_HEAT_KS_PW=9de88192682742ae
+
+# Set to 'y' if you would like Packstack to install Heat CloudWatch
+# API
+CONFIG_HEAT_CLOUDWATCH_INSTALL=n
+
+# Set to 'y' if you would like Packstack to install Heat
+# CloudFormation API
+CONFIG_HEAT_CFN_INSTALL=n
+
+# Name of Keystone domain for Heat
+CONFIG_HEAT_DOMAIN=heat
+
+# Name of Keystone domain admin user for Heat
+CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
+
+# Password for Keystone domain admin user for Heat
+CONFIG_HEAT_DOMAIN_PASSWORD=99ac906641844f27
+
+# Secret key for signing metering messages
+CONFIG_CEILOMETER_SECRET=82fd834fdfd74dcb
+
+# The password to use for Ceilometer to authenticate with Keystone
+CONFIG_CEILOMETER_KS_PW=c053923e1a564e69
+
+# The IP address of the server on which to install MongoDB
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+# The password of the nagiosadmin user on the Nagios server
+CONFIG_NAGIOS_PW=c8e697956bcf49ab
--- a/packstack/packstack-answers-single.txt
+++ b/packstack/packstack-answers-single.txt
@ -0,0 +1,15 @@
+[general]
+CONFIG_NTP_SERVERS=192.168.33.200
+CONFIG_KEYSTONE_ADMIN_PW=openstack
+CONFIG_USE_EPEL=n
+
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+CONFIG_HORIZON_SSL=y
+CONFIG_PROVISION_DEMO=n
--- a/reposync/centos.repo
+++ b/reposync/centos.repo
@ -0,0 +1,23 @@
+[extras-7]
+name=CentOS Extras 7
+baseurl=http://mirror.centos.org/centos/7/extras/x86_64
+enabled=1
+gpgcheck=0
+
+[extras-6]
+name=CentOS Extras 6
+baseurl=http://mirror.centos.org/centos/6/extras/x86_64
+enabled=1
+gpgcheck=0
+
+[updates-7]
+name=CentOS Updates 7
+baseurl=http://mirror.centos.org/centos/7/updates/x86_64
+enabled=1
+gpgcheck=0
+
+[updates-6]
+name=CentOS Updates 6
+baseurl=http://mirror.centos.org/centos/6/updates/x86_64
+enabled=1
+gpgcheck=0
--- a/reposync/epel.repo
+++ b/reposync/epel.repo
@ -0,0 +1,12 @@
+[epel-7]
+name=EPEL 7
+baseurl=http://dl.fedoraproject.org/pub/epel/7/x86_64/
+enabled=1
+gpgcheck=0
+
+[epel-6]
+name=EPEL 6
+baseurl=http://dl.fedoraproject.org/pub/epel/6/x86_64/
+enabled=1
+gpgcheck=0
+
--- a/reposync/puppet.repo
+++ b/reposync/puppet.repo
@ -0,0 +1,24 @@
+[puppet-7]
+name=Puppet EL 7
+baseurl=http://yum.puppetlabs.com/el/7/products/x86_64/
+enabled=1
+gpgcheck=0
+
+[puppet-6]
+name=Puppet EL 6
+baseurl=http://yum.puppetlabs.com/el/6/products/x86_64/
+enabled=1
+gpgcheck=0
+
+[puppet-deps-7]
+name=Puppet dependencies EL 7
+baseurl=http://yum.puppetlabs.com/el/7/dependencies/x86_64/
+enabled=1
+gpgcheck=0
+
+[puppet-deps-6]
+name=Puppet dependencies EL 6
+baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64/
+enabled=1
+gpgcheck=0
+
--- a/reposync/rdo-openstack.repo
+++ b/reposync/rdo-openstack.repo
@ -0,0 +1,17 @@
+[rdo-openstack-epel-7]
+name=RDO OpenStack for EL 7
+baseurl=https://repos.fedorapeople.org/repos/openstack/openstack-icehouse/epel-7/
+enabled=1
+gpgcheck=0
+
+[rdo-openstack-epel-6]
+name=RDO OpenStack for EL 6
+baseurl=https://repos.fedorapeople.org/repos/openstack/openstack-icehouse/epel-6/
+enabled=1
+gpgcheck=0
+
+[rdo-openstack-juno-epel-7]
+name=RDO OpenStack Juno for EL 7
+baseurl=https://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7/
+enabled=1
+gpgcheck=0
--- a/reposync/yum.conf
+++ b/reposync/yum.conf
@ -0,0 +1,24 @@
+[main]
+cachedir=/var/cache/yum/$basearch/$releasever
+keepcache=0
+debuglevel=2
+logfile=/var/log/yum.log
+exactarch=1
+obsoletes=1
+gpgcheck=1
+plugins=1
+installonly_limit=3
+reposdir=/etc/reposync.repos.d
+
+#  This is the default, if you make this bigger yum won't see if the metadata
+# is newer on the remote and so you'll "gain" the bandwidth of not having to
+# download the new metadata and "pay" for it by yum not having correct
+# information.
+#  It is esp. important, to have correct metadata, for distributions like
+# Fedora which don't keep old packages around. If you don't like this checking
+# interupting your command line usage, it's much better to have something
+# manually check the metadata once an hour (yum-updatesd will do this).
+# metadata_expire=90m
+
+# PUT YOUR REPOS HERE OR IN separate files named file.repo
+# in /etc/yum.repos.d
--- a/xcat/c6-os/controller.otherpkgs.pkglist
+++ b/xcat/c6-os/controller.otherpkgs.pkglist
@ -0,0 +1,52 @@
+## PackStack/Puppet
+puppet
+openstack-packstack
+openstack-puppet-modules
+erlang
+
+## Pre-reqs
+mariadb-galera-server
+rabbitmq-server
+
+## OpenStack Deps
+openstack-utils
+openstack-selinux
+
+## Nova
+openstack-nova
+openstack-nova-novncproxy
+openstack-nova-console
+
+## Neutron
+openstack-neutron
+
+## Glance
+openstack-glance
+
+## KeyStone
+openstack-keystone
+
+## Swift
+openstack-swift
+openstack-swift-proxy
+openstack-swift-object
+openstack-swift-container
+openstack-swift-account
+
+## Dashboard
+openstack-dashboard
+
+## Telemetry
+mongodb-server
+openstack-ceilometer-*
+python-ceilometer
+python-ceilometerclient
+
+## Cinder
+openstack-cinder
+
+## Nagios
+nagios
+nagios-devel
+nagios-plugins*
+nrpe
--- a/xcat/c6-os/controller.partfile
+++ b/xcat/c6-os/controller.partfile
@ -0,0 +1,9 @@
+part /boot --fstype=ext4 --size=1024
+part /boot/efi --fstype=vfat --size=100
+part pv.1 --grow --size=1
+
+volgroup system --pesize=4096 pv.1
+
+logvol / --fstype=ext4 --name=root --vgname=system --size=20480
+logvol swap --name=swap --vgname=system --size=8192
+logvol /var --fstype=ext4 --name=var --vgname=system --size=40960
--- a/xcat/c6-os/controller.pkglist
+++ b/xcat/c6-os/controller.pkglist
@ -0,0 +1,25 @@
+xauth
+xorg-x11-utils
+kernel-devel
+qemu-kvm
+httpd
+php
+gcc
+glibc
+glibc-common
+scsi-target-utils
+yum-plugin-priorities
+xinetd
+memcached
+mod_wsgi
+mod_ssl
+python-memcached
+gd
+gd-devel
+openssl
+scsi-target-utils
+yum-plugin-priorities
+xinetd
+-*-firmware
+-wpa_supplicant
+-wireless-tools
--- a/xcat/c6-os/nova.otherpkgs.pkglist
+++ b/xcat/c6-os/nova.otherpkgs.pkglist
@ -0,0 +1,25 @@
+## OpenStack Deps
+rdo-openstack/openstack-utils
+rdo-openstack/openstack-selinux
+
+## Nova
+rdo-openstack/openstack-nova-compute
+
+## Neutron
+rdo-openstack/openstack-neutron
+
+## Telemetry
+rdo-openstack/openstack-ceilometer-compute
+
+## Nagios
+epel/nagios-plugins*
+epel/nrpe
+
+## Foreman
+foreman/foreman
+
+## Puppet
+puppet/puppet
+
+## Ruby
+ruby/ruby193-ruby
--- a/xcat/c6-os/nova.partfile
+++ b/xcat/c6-os/nova.partfile
@ -0,0 +1,9 @@
+part /boot --fstype=ext4 --size=1024
+part /boot/efi --fstype=vfat --size=100
+part pv.1 --grow --size=1
+
+volgroup system --pesize=4096 pv.1
+
+logvol / --fstype=ext4 --name=root --vgname=system --size=20480
+logvol swap --name=swap --vgname=system --size=8192
+logvol /var --fstype=ext4 --name=var --vgname=system --size=40960
--- a/xcat/c6-os/nova.pkglist
+++ b/xcat/c6-os/nova.pkglist
@ -0,0 +1,25 @@
+xauth
+xorg-x11-utils
+kernel-devel
+qemu-kvm
+httpd
+php
+gcc
+glibc
+glibc-common
+scsi-target-utils
+yum-plugin-priorities
+xinetd
+memcached
+mod_wsgi
+mod_ssl
+python-memcached
+gd
+gd-devel
+openssl
+scsi-target-utils
+yum-plugin-priorities
+xinetd
+-*-firmware
+-wpa_supplicant
+-wireless-tools
--- a/xcat/c7-os/common.juno.tmpl
+++ b/xcat/c7-os/common.juno.tmpl
@ -0,0 +1,154 @@
+#
+#cmdline
+
+lang en_US
+#KICKSTARTNET#
+
+#
+# Where's the source?
+# nfs --server hostname.of.server or IP --dir /path/to/RH/CD/image
+#
+#nfs --server #XCATVAR:INSTALL_NFS# --dir #XCATVAR:INSTALL_SRC_DIR#
+
+%include /tmp/repos
+
+#device ethernet e100
+keyboard "us"
+
+#
+# Clear the MBR
+#
+zerombr
+
+#
+# Wipe out the disk
+#
+clearpart --all --initlabel
+#clearpart --linux
+#key --skip
+
+#
+# Customize to fit your needs
+#
+
+#XCAT_PARTITION_START#
+#No RAID
+#/boot really significant for this sort of setup nowadays?
+#part /boot --size 50 --fstype ext3
+%include /tmp/partitioning
+#part swap --size 1024 
+#part / --size 1 --grow --fstype ext4
+#XCAT_PARTITION_END#
+
+#RAID 0 /scr for performance
+#part / --size 1024 --ondisk sda
+#part swap --size 512 --ondisk sda
+#part /var --size 1024 --ondisk sdb
+#part swap --size 512 --ondisk sdb
+#part raid.01 --size 1 --grow --ondisk sda
+#part raid.02 --size 1 --grow --ondisk sdb
+#raid /scr --level 0 --device md0 raid.01 raid.02
+
+#Full RAID 1 Sample
+#part raid.01 --size 50 --ondisk sda
+#part raid.02 --size 50 --ondisk sdb
+#raid /boot --level 1 --device md0 raid.01 raid.02
+#
+#part raid.11 --size 1024 --ondisk sda
+#part raid.12 --size 1024 --ondisk sdb
+#raid / --level 1 --device md1 raid.11 raid.12
+#
+#part raid.21 --size 1024 --ondisk sda
+#part raid.22 --size 1024 --ondisk sdb
+#raid /var --level 1 --device md2 raid.21 raid.22
+#
+#part raid.31 --size 1024 --ondisk sda
+#part raid.32 --size 1024 --ondisk sdb
+#raid swap --level 1 --device md3 raid.31 raid.32
+#
+#part raid.41 --size 1 --grow --ondisk sda
+#part raid.42 --size 1 --grow --ondisk sdb
+#raid /scr --level 1 --device md4 raid.41 raid.42
+
+#
+# bootloader config
+# --append <args>
+# --useLilo
+# --md5pass <crypted MD5 password for GRUB>
+#
+bootloader
+
+#
+# install or upgrade
+#
+install
+
+#
+# text mode install (default is graphical)
+#
+text
+
+#
+# firewall
+#
+#firewall --disabled
+
+#
+# Select a zone
+# Add the --utc switch if your hardware clock is set to GMT
+#
+#timezone US/Hawaii
+#timezone US/Pacific
+#timezone US/Mountain
+#timezone US/Central
+#timezone US/Eastern
+timezone --utc "#TABLE:site:key=timezone:value#"
+
+#
+# Don't do X
+#
+skipx
+
+
+#
+# To generate an encrypted root password use:
+#
+# perl -e 'print crypt("blah","Xa") . "\n";'p
+# openssl passwd -apr1 -salt xxxxxxxx password
+# 
+# where "blah" is your root password.
+#
+#rootpw --iscrypted XaLGAVe1C41x2
+#rootpw XaLGAVe1C41x2 --iscrypted
+rootpw --iscrypted #CRYPT:passwd:key=system,username=root:password#
+
+#
+# NIS setup: auth --enablenis --nisdomain sensenet 
+# --nisserver neptune --useshadow --enablemd5
+#
+# OR
+auth --useshadow --enablemd5
+
+
+#
+# SE Linux
+#
+selinux --permissive
+
+#
+# Reboot after installation
+#
+reboot
+
+#
+#end of section
+#
+%packages
+#INCLUDE_DEFAULT_PKGLIST#
+%end
+%pre
+#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/pre.rh.rhel7#
+%end
+%post
+#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.xcat#
+%end
--- a/xcat/c7-os/controller.juno.otherpkgs.pkglist
+++ b/xcat/c7-os/controller.juno.otherpkgs.pkglist
@ -0,0 +1,62 @@
+## PackStack/Puppet
+puppet/puppet
+rdo-openstack-juno/openstack-packstack
+rdo-openstack-juno/openstack-puppet-modules
+epel/erlang
+
+## Pre-reqs
+rdo-openstack-juno/mariadb-galera-server
+rdo-openstack-juno/rabbitmq-server
+
+## OpenStack Deps
+rdo-openstack-juno/openstack-utils
+rdo-openstack-juno/openstack-selinux
+
+## Nova
+rdo-openstack-juno/openstack-nova
+rdo-openstack-juno/openstack-nova-novncproxy
+rdo-openstack-juno/openstack-nova-console
+
+## Neutron
+rdo-openstack-juno/openstack-neutron
+rdo-openstack-juno/openstack-neutron-ml2
+rdo-openstack-juno/openstack-neutron-openvswitch
+rdo-openstack-juno/openvswitch
+
+## Glance
+rdo-openstack-juno/openstack-glance
+
+## KeyStone
+rdo-openstack-juno/openstack-keystone
+
+## Swift
+rdo-openstack-juno/openstack-swift
+rdo-openstack-juno/openstack-swift-proxy
+rdo-openstack-juno/openstack-swift-object
+rdo-openstack-juno/openstack-swift-container
+rdo-openstack-juno/openstack-swift-account
+
+## Dashboard
+rdo-openstack-juno/openstack-dashboard
+
+## Telemetry
+rdo-openstack-juno/mongodb-server
+rdo-openstack-juno/openstack-ceilometer-*
+rdo-openstack-juno/python-ceilometer
+rdo-openstack-juno/python-ceilometerclient
+
+## Cinder
+rdo-openstack-juno/openstack-cinder
+
+## Heat
+rdo-openstack-juno/openstack-heat-api
+
+## Nagios
+epel/nagios
+epel/nagios-devel
+epel/nagios-plugins*
+epel/nrpe
+
+## Misc
+epel/scsi-target-utils
+extras/python-itsdangerous
--- a/xcat/c7-os/controller.otherpkgs.pkglist
+++ b/xcat/c7-os/controller.otherpkgs.pkglist
@ -0,0 +1,62 @@
+## PackStack/Puppet
+puppet/puppet
+rdo-openstack/openstack-packstack
+rdo-openstack/openstack-puppet-modules
+epel/erlang
+
+## Pre-reqs
+rdo-openstack/mariadb-galera-server
+rdo-openstack/rabbitmq-server
+
+## OpenStack Deps
+rdo-openstack/openstack-utils
+rdo-openstack/openstack-selinux
+
+## Nova
+rdo-openstack/openstack-nova
+rdo-openstack/openstack-nova-novncproxy
+rdo-openstack/openstack-nova-console
+
+## Neutron
+rdo-openstack/openstack-neutron
+rdo-openstack/openstack-neutron-ml2
+rdo-openstack/openstack-neutron-openvswitch
+rdo-openstack/openvswitch
+
+## Glance
+rdo-openstack/openstack-glance
+
+## KeyStone
+rdo-openstack/openstack-keystone
+
+## Swift
+rdo-openstack/openstack-swift
+rdo-openstack/openstack-swift-proxy
+rdo-openstack/openstack-swift-object
+rdo-openstack/openstack-swift-container
+rdo-openstack/openstack-swift-account
+
+## Dashboard
+rdo-openstack/openstack-dashboard
+
+## Telemetry
+rdo-openstack/mongodb-server
+rdo-openstack/openstack-ceilometer-*
+rdo-openstack/python-ceilometer
+rdo-openstack/python-ceilometerclient
+
+## Cinder
+rdo-openstack/openstack-cinder
+
+## Heat
+rdo-openstack/openstack-heat-api
+
+## Nagios
+epel/nagios
+epel/nagios-devel
+epel/nagios-plugins*
+epel/nrpe
+
+## Misc
+epel/scsi-target-utils
+extras/python-itsdangerous
--- a/xcat/c7-os/controller.partfile
+++ b/xcat/c7-os/controller.partfile
@ -0,0 +1,9 @@
+part /boot --fstype=ext4 --size=1024
+part /boot/efi --fstype=vfat --size=100
+part pv.1 --grow --size=1
+
+volgroup system --pesize=4096 pv.1
+
+logvol / --fstype=ext4 --name=root --vgname=system --size=20480
+logvol swap --name=swap --vgname=system --size=8192
+logvol /var --fstype=ext4 --name=var --vgname=system --size=40960
--- a/xcat/c7-os/controller.pkglist
+++ b/xcat/c7-os/controller.pkglist
@ -0,0 +1,25 @@
+#INCLUDE:/opt/xcat/share/xcat/install/rh/compute.rhel7.pkglist#
+gcc
+gd
+gd-devel
+glibc
+glibc.i686
+glibc-common
+httpd
+kernel-devel
+memcached
+mod_ssl
+mod_wsgi
+openssl
+patch
+php
+python-memcached
+qemu-kvm
+xinetd
+xauth
+xorg-x11-utils
+yum-plugin-priorities
+yum-utils
+-*-firmware
+-wpa_supplicant
+-wireless-tools
--- a/xcat/c7-os/controller.synclist
+++ b/xcat/c7-os/controller.synclist
--- a/xcat/c7-os/nova.juno.otherpkgs.pkglist
+++ b/xcat/c7-os/nova.juno.otherpkgs.pkglist
@ -0,0 +1,25 @@
+## PackStack/Puppet
+puppet/puppet
+
+## OpenStack Deps
+rdo-openstack-juno/openstack-utils
+rdo-openstack-juno/openstack-selinux
+
+## Nova
+rdo-openstack-juno/openstack-nova-compute
+
+## Neutron
+rdo-openstack-juno/openstack-neutron
+rdo-openstack-juno/openstack-neutron-openvswitch
+rdo-openstack-juno/openstack-neutron-ml2
+
+## Telemetry
+rdo-openstack-juno/openstack-ceilometer-compute
+
+## Nagios
+epel/nagios-plugins*
+epel/nrpe
+
+## Misc
+epel/scsi-target-utils
+extras/python-greenlet
--- a/xcat/c7-os/nova.otherpkgs.pkglist
+++ b/xcat/c7-os/nova.otherpkgs.pkglist
@ -0,0 +1,24 @@
+## PackStack/Puppet
+puppet/puppet
+
+## OpenStack Deps
+rdo-openstack/openstack-utils
+rdo-openstack/openstack-selinux
+
+## Nova
+rdo-openstack/openstack-nova-compute
+
+## Neutron
+rdo-openstack/openstack-neutron
+rdo-openstack/openstack-neutron-openvswitch
+rdo-openstack/openstack-neutron-ml2
+
+## Telemetry
+rdo-openstack/openstack-ceilometer-compute
+
+## Nagios
+epel/nagios-plugins*
+epel/nrpe
+
+## Misc
+epel/scsi-target-utils
--- a/xcat/c7-os/nova.partfile
+++ b/xcat/c7-os/nova.partfile
@ -0,0 +1,9 @@
+part /boot --fstype=ext4 --size=1024
+part /boot/efi --fstype=vfat --size=100
+part pv.1 --grow --size=1
+
+volgroup system --pesize=4096 pv.1
+
+logvol / --fstype=ext4 --name=root --vgname=system --size=20480
+logvol swap --name=swap --vgname=system --size=8192
+logvol /var --fstype=ext4 --name=var --vgname=system --size=40960
--- a/xcat/c7-os/nova.pkglist
+++ b/xcat/c7-os/nova.pkglist
@ -0,0 +1,26 @@
+#INCLUDE:/opt/xcat/share/xcat/install/rh/compute.rhel7.pkglist#
+gcc
+gd
+gd-devel
+glibc
+glibc.i686
+glibc-common
+httpd
+kernel-devel
+libvirt
+memcached
+mod_ssl
+mod_wsgi
+openssl
+patch
+php
+python-memcached
+qemu-kvm
+xinetd
+xauth
+xorg-x11-utils
+yum-plugin-priorities
+yum-utils
+-*-firmware
+-wpa_supplicant
+-wireless-tools
--- a/xcat/osimages/c6-os-nova.osimage
+++ b/xcat/osimages/c6-os-nova.osimage
@ -0,0 +1,18 @@
+# <xCAT data object stanza file>
+
+c6-os-nova:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos6.5
+    otherpkgdir=/install/post/otherpkgs/el6
+    otherpkglist=/install/templates/c6-os/nova.otherpkgs.pkglist
+    partitionfile=/install/templates/c6-os/nova.partfile
+    pkgdir=/install/centos6.5/x86_64,/install/centos6.5/updates/x86_64
+    pkglist=/install/templates/c6-os/nova.pkglist
+    postbootscripts=confignics
+    profile=nova
+    provmethod=install
+    synclists=/install/templates/c6-os/nova.synclist
+    template=/opt/xcat/share/xcat/install/centos/compute.centos6.tmpl
--- a/xcat/osimages/c6-os.osimage
+++ b/xcat/osimages/c6-os.osimage
@ -0,0 +1,19 @@
+# <xCAT data object stanza file>
+
+c7-os-juno-nova:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos7.0
+    otherpkgdir=/install/post/otherpkgs/el7
+    otherpkglist=/install/templates/c7-os/nova.juno.otherpkgs.pkglist
+    partitionfile=/install/templates/c7-os/nova.partfile
+    pkgdir=/install/centos7.0/x86_64,/install/centos7.0/updates/x86_64
+    pkglist=/install/templates/c7-os/nova.pkglist
+    postbootscripts=confignics
+    postscripts=hardeths
+    profile=nova
+    provmethod=install
+    synclists=/install/templates/c7-os/nova.synclist
+    template=/install/templates/c7-os/common.juno.tmpl
--- a/xcat/osimages/c7-os-juno-nova.osimage
+++ b/xcat/osimages/c7-os-juno-nova.osimage
@ -0,0 +1,19 @@
+# <xCAT data object stanza file>
+
+c7-os-juno-nova:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos7.0
+    otherpkgdir=/install/post/otherpkgs/el7
+    otherpkglist=/install/templates/c7-os/nova.juno.otherpkgs.pkglist
+    partitionfile=/install/templates/c7-os/nova.partfile
+    pkgdir=/install/centos7.0/x86_64,/install/centos7.0/updates/x86_64
+    pkglist=/install/templates/c7-os/nova.pkglist
+    postbootscripts=confignics
+    postscripts=hardeths
+    profile=nova
+    provmethod=install
+    synclists=/install/templates/c7-os/nova.synclist
+    template=/install/templates/c7-os/common.juno.tmpl
--- a/xcat/osimages/c7-os-juno.osimage
+++ b/xcat/osimages/c7-os-juno.osimage
@ -0,0 +1,19 @@
+# <xCAT data object stanza file>
+
+c7-os-juno:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos7.0
+    otherpkgdir=/install/post/otherpkgs/el7
+    otherpkglist=/install/templates/c7-os/controller.juno.otherpkgs.pkglist
+    partitionfile=/install/templates/c7-os/controller.partfile
+    pkgdir=/install/centos7.0/x86_64,/install/centos7.0/updates/x86_64
+    pkglist=/install/templates/c7-os/controller.pkglist
+    postbootscripts=setup_extnw -n xcat_pub,packstack-openstack,add_glance_images
+    postscripts=confignics,hardeths
+    profile=controller
+    provmethod=install
+    synclists=/install/templates/c7-os/controller.synclist
+    template=/install/templates/c7-os/common.juno.tmpl
--- a/xcat/osimages/c7-os-nova.osimage
+++ b/xcat/osimages/c7-os-nova.osimage
@ -0,0 +1,19 @@
+# <xCAT data object stanza file>
+
+c7-os-nova:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos7.0
+    otherpkgdir=/install/post/otherpkgs/el7
+    otherpkglist=/install/templates/c7-os/nova.otherpkgs.pkglist
+    partitionfile=/install/templates/c7-os/nova.partfile
+    pkgdir=/install/centos7.0/x86_64,/install/centos7.0/updates/x86_64
+    pkglist=/install/templates/c7-os/nova.pkglist
+    postbootscripts=confignics
+    postscripts=hardeths
+    profile=nova
+    provmethod=install
+    synclists=/install/templates/c7-os/nova.synclist
+    template=/opt/xcat/share/xcat/install/rh/compute.rhel7.tmpl
--- a/xcat/osimages/c7-os.osimage
+++ b/xcat/osimages/c7-os.osimage
@ -0,0 +1,19 @@
+# <xCAT data object stanza file>
+
+c7-os:
+    objtype=osimage
+    imagetype=linux
+    osarch=x86_64
+    osname=Linux
+    osvers=centos7.0
+    otherpkgdir=/install/post/otherpkgs/el7
+    otherpkglist=/install/templates/c7-os/controller.otherpkgs.pkglist
+    partitionfile=/install/templates/c7-os/controller.partfile
+    pkgdir=/install/centos7.0/x86_64,/install/centos7.0/updates/x86_64
+    pkglist=/install/templates/c7-os/controller.pkglist
+    postbootscripts=setup_extnw -n xcat_pub,packstack-openstack,add_glance_images
+    postscripts=confignics,hardeths
+    profile=controller
+    provmethod=install
+    synclists=/install/templates/c7-os/controller.synclist
+    template=/opt/xcat/share/xcat/install/rh/compute.rhel7.tmpl
--- a/xcat/postscripts/data/packstack/c7-patches/apache-puppet.patch
+++ b/xcat/postscripts/data/packstack/c7-patches/apache-puppet.patch
@ -0,0 +1,11 @@
+--- a/manifests/version.pp     2014-08-27 12:24:57.659804760 +0100
+++ b/manifests/version.pp  2014-08-27 12:25:06.841971767 +0100
+@@ -5,7 +5,7 @@
+ class apache::version {
+   case $::osfamily {
+     'RedHat': {
+-      if ($::operatingsystem == 'Fedora' and $::operatingsystemrelease >= 18) or ($::operatingsystem != 'Fedora' and $::operatingsystemrelease >= 7) {
+      if ($::operatingsystem == 'Fedora' and $::operatingsystemrelease >= 18) or ($::operatingsystem != 'Fedora' and $::operatingsystemmajrelease >= 7) {
+         $default = 2.4
+       } else {
+         $default = 2.2
--- a/xcat/postscripts/data/packstack/c7-patches/mysql-puppet.patch
+++ b/xcat/postscripts/data/packstack/c7-patches/mysql-puppet.patch
@ -0,0 +1,60 @@
+diff --git a/manifests/params.pp b/manifests/params.pp
+index 0e91e81..f1964d4 100644
+--- a/manifests/params.pp
+++ b/manifests/params.pp
+@@ -38,8 +38,8 @@
+             $provider = 'mysql'
+           }
+         }
+-        'RedHat': {
+-          if $::operatingsystemrelease >= 7 {
+        /^(RedHat|CentOS|Scientific)$/: {
+          if $::operatingsystemmajrelease >= 7 {
+             $provider = 'mariadb'
+           } else {
+             $provider = 'mysql'
+diff --git a/spec/classes/mysql_server_spec.rb b/spec/classes/mysql_server_spec.rb
+index e21f22c..3184f65 100644
+--- a/spec/classes/mysql_server_spec.rb
+++ b/spec/classes/mysql_server_spec.rb
+@@ -75,6 +75,40 @@
+     end
+   end
+ 
+  context 'mysql::server::install on RHEL 7' do
+    let :facts do
+      { :osfamily                  => 'RedHat',
+        :operatingsystem           => 'RedHat',
+        :operatingsystemmajrelease => 7
+      }
+    end
+
+    let(:params) {{ :package_ensure => 'present', :name => 'mariadb-server' }}
+    it do
+      should contain_package('mysql-server').with({
+      :ensure => :present,
+      :name   => 'mariadb-server',
+    })
+    end
+  end
+
+  context 'mysql::server::install on CentOS 7' do
+    let :facts do
+      { :osfamily                  => 'RedHat',
+        :operatingsystem           => 'CentOS',
+        :operatingsystemmajrelease => 7
+      }
+    end
+
+    let(:params) {{ :package_ensure => 'present', :name => 'mariadb-server' }}
+    it do
+      should contain_package('mysql-server').with({
+      :ensure => :present,
+      :name   => 'mariadb-server',
+    })
+    end
+  end
+
+   context 'mysql::server::config' do
+     it do
+       should contain_file('/etc/mysql').with({
--- a/xcat/postscripts/data/packstack/c7-patches/nova-puppet.patch
+++ b/xcat/postscripts/data/packstack/c7-patches/nova-puppet.patch
@ -0,0 +1,15 @@
+diff --git a/manifests/params.pp b/manifests/params.pp
+index f553567..e62f58d 100644
+--- a/manifests/params.pp
+++ b/manifests/params.pp
+@@ -44,8 +44,8 @@
+         'Fedora', 'RedHat': {
+           $special_service_provider = undef
+         }
+-        'RedHat': {
+-          if ($::operatingsystemrelease < 7) {
+        'RedHat', 'CentOS', 'Scientific': {
+          if ($::operatingsystemmajrelease < 7) {
+             $special_service_provider = 'init'
+           } else {
+             $special_service_provider = undef
--- a/xcat/postscripts/data/packstack/c7-patches/python.patch
+++ b/xcat/postscripts/data/packstack/c7-patches/python.patch
@ -0,0 +1,38 @@
+diff --git a/packstack/puppet/templates/amqp.pp b/packstack/puppet/templates/amqp.pp
+index 15d7b5d..ca79707 100644
+--- a/packstack/puppet/templates/amqp.pp
+++ b/packstack/puppet/templates/amqp.pp
+@@ -44,7 +44,7 @@
+     }
+ 
+     'RedHat', 'CentOS': {
+-      if $::operatingsystemrelease >= 7 {
+      if $::operatingsystemmajrelease >= 7 {
+         $config = '/etc/qpid/qpidd.conf'
+       } else {
+         $config = '/etc/qpidd.conf'
+diff --git a/packstack/puppet/templates/mysql_install.pp b/packstack/puppet/templates/mysql_install.pp
+index 1364f79..6a33cba 100644
+--- a/packstack/puppet/templates/mysql_install.pp
+++ b/packstack/puppet/templates/mysql_install.pp
+@@ -1,6 +1,6 @@
+ 
+ # on EL6 we need to wait for innodb changes before starting mysqld
+-if $::operatingsystem in ['RedHat','CentOS','Scientific'] and $::operatingsystemrelease < 7 {
+if $::operatingsystem in ['RedHat','CentOS','Scientific'] and $::operatingsystemmajrelease < 7 {
+     $manage_service = false
+     service { 'mysqld':
+       enable  => true,
+diff --git a/packstack/puppet/templates/prescript.pp b/packstack/puppet/templates/prescript.pp
+index 4c95292..32d53e8 100644
+--- a/packstack/puppet/templates/prescript.pp
+++ b/packstack/puppet/templates/prescript.pp
+@@ -10,7 +10,7 @@
+ }
+ 
+ # For older RHEL-6 releases kernel/iptools does not support netns
+-if $::operatingsystem in $el_releases and $::operatingsystemrelease < 7 {
+if $::operatingsystem in $el_releases and $::operatingsystemmajrelease < 7 {
+   $info = "The RDO kernel that includes network namespace (netns) support has been installed on host $::ipaddress."
+   $warning = " This is a community supplied kernel and is not officially supported by Red Hat. Installing this kernel on RHEL systems may impact your ability to get support from Red Hat."
+ 
--- a/xcat/postscripts/data/packstack/packstack-answers-multi.txt
+++ b/xcat/postscripts/data/packstack/packstack-answers-multi.txt
@ -0,0 +1,29 @@
+[general]
+CONFIG_NTP_SERVERS=192.168.33.200
+CONFIG_KEYSTONE_ADMIN_PW=openstack
+CONFIG_USE_EPEL=n
+
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+CONFIG_HORIZON_SSL=y
+CONFIG_PROVISION_DEMO=n
+
+CONFIG_CEILOMETER_INSTALL=n
+CONFIG_NAGIOS_INSTALL=n
+CONFIG_SWIFT_INSTALL=n
+
+CONFIG_NEUTRON_L2_PLUGIN=ml2
+CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vlan
+CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vlan
+CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
+CONFIG_NEUTRON_ML2_VLAN_RANGES=physnet_xcat:1000:2000
+CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vlan
+CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet_xcat:1000:2000
+CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet_xcat:br-xcat
+CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-xcat:enp2s1f0
--- a/xcat/postscripts/data/packstack/packstack-answers-single.txt
+++ b/xcat/postscripts/data/packstack/packstack-answers-single.txt
@ -0,0 +1,15 @@
+[general]
+CONFIG_NTP_SERVERS=192.168.33.200
+CONFIG_KEYSTONE_ADMIN_PW=openstack
+CONFIG_USE_EPEL=n
+
+CONFIG_CONTROLLER_HOST=##OPENSTACK_MASTER##
+CONFIG_COMPUTE_HOSTS=##OPENSTACK_MASTER##
+CONFIG_NETWORK_HOSTS=##OPENSTACK_MASTER##
+CONFIG_VCENTER_HOST=##OPENSTACK_MASTER##
+CONFIG_AMQP_HOST=##OPENSTACK_MASTER##
+CONFIG_MYSQL_HOST=##OPENSTACK_MASTER##
+CONFIG_MONGODB_HOST=##OPENSTACK_MASTER##
+
+CONFIG_HORIZON_SSL=y
+CONFIG_PROVISION_DEMO=n
--- a/xcat/postscripts/data/packstack/packstack-answers.txt
+++ b/xcat/postscripts/data/packstack/packstack-answers.txt
@ -0,0 +1 @@
+packstack-answers-multi.txt
--- a/xcat/postscripts/scripts/add_glance_images
+++ b/xcat/postscripts/scripts/add_glance_images
@ -0,0 +1,16 @@
+#!/bin/sh
+
+mkdir -p /post
+mount $MASTER:$INSTALLDIR /post
+
+IMAGEDIR=/post/data/openstack/images
+
+. ~/keystonerc_admin
+
+glance image-create --name cento6.4-gold --is-public=True --disk-format=raw --container-format=bare --file $IMAGEDIR/centos6.4-x86_64-gold-master.img
+glance image-create --name cento6.4-min  --is-public=True --disk-format=qcow2 --container-format=bare --file $IMAGEDIR/CentOS-6.4-x86_64-Minimal-OpenStack.image.qcow2c
+glance image-create --name rhel7-beta    --is-public=True --disk-format=qcow2 --container-format=bare --file $IMAGEDIR/rhel-7-public-beta-x86_64-kvm.qcow2
+glance image-create --name centos7       --is-public=True --disk-format=qcow2 --container-format=bare --file $IMAGEDIR/CentOS-7-x86_64-GenericCloud.qcow2
+glance image-create --name ubuntu14.04   --is-public=True --disk-format=raw --container-format=bare --file $IMAGEDIR/ubuntu-14.04-server-cloudimg-amd64-disk1.img
+
+umount /post
--- a/xcat/postscripts/scripts/packstack-openstack
+++ b/xcat/postscripts/scripts/packstack-openstack
@ -0,0 +1,89 @@
+#!/bin/sh
+
+#set -ax
+
+PACKSTACKDIR=/xcatpost/ocf/data/packstack
+IMAGEDIR=/post/data/openstack/images
+ANSWERS_FILE=packstack-answers.txt
+
+export HOME=/root
+
+IP=$(nslookup $NODE-pub | grep Address: | tail -n 1 | awk '{print $2}')
+
+sed s/##OPENSTACK_MASTER##/$IP/g ${PACKSTACKDIR}/${ANSWERS_FILE} > /tmp/${ANSWERS_FILE}
+
+packstack --answer-file=/tmp/${ANSWERS_FILE}
+
+. /root/keystonerc_admin
+
+# Add the bridge networks
+ovs-vsctl add-br br-external
+ovs-vsctl add-port br-external enp2s1f1
+
+ovs-vsctl add-br br-internal
+ovs-vsctl add-port br-internal enp2s1f0
+
+# Remove the default networks
+neutron router-gateway-clear router1
+neutron subnet-delete public_subnet
+neutron net-delete public
+
+nova flavor-create m1.nano auto 128 1 1
+
+# Add the relevant networks on the cluster
+neutron net-create ext_net --router:external=True 
+neutron subnet-create --name ext_subnet --disable-dhcp ext_net 192.168.33.0/24 \
+    --gateway 192.168.33.254 --allocation-pool start=192.168.33.161,end=192.168.33.190
+
+neutron net-create int_net
+neutron subnet-create --name int_subnet --disable-dhcp int_net 10.0.0.0/23 \
+    --gateway 10.0.0.201 --allocation-pool start=10.0.0.161,end=10.0.0.190
+
+# Add the default cirros image from xCAT's local repo
+mkdir -p /post
+mount $MASTER:$INSTALLDIR /post
+glance image-create --name cirros --is-public=True --disk-format=raw --container-format=bare --file $IMAGEDIR/cirros-0.3.1-x86_64-disk.img
+umount /post
+
+# Create the temporary demo user
+keystone tenant-create --name demo
+keystone user-create --name demo --pass demo
+keystone user-role-add --user demo --role _member_ --tenant demo
+
+cat > /root/keystonerc_demo << EOF
+export OS_USERNAME=demo
+export OS_TENANT_NAME=demo
+export OS_PASSWORD=demo
+export OS_AUTH_URL=http://$IP:5000/v2.0/
+export PS1='[\u@\h \W(keystone_demo)]\$ '
+EOF
+
+. /root/keystonerc_demo
+
+# Create the ssh key, and add to OpenStack
+ssh-keygen -t rsa -b 4096 -N '' -f /root/id_rsa_demo
+nova keypair-add --pub-key /root/id_rsa_demo.pub demo
+
+# Remove the default networks if they have been created
+neutron router-interface-delete router1 private_subnet
+neutron subnet-delete private_subnet
+neutron net-delete private
+
+# Create the private network and router under the demo tenant
+neutron net-create stack_net_priv
+neutron subnet-create --name stack_subnet_priv --dns-nameserver 8.8.8.8 stack_net_priv 10.0.8.0/24
+
+neutron router-create extnet_stackrouter
+neutron router-gateway-set extnet_stackrouter ext_net
+neutron router-interface-add extnet_stackrouter stack_net_priv
+
+# Allow ssh and ping from the default security group
+neutron security-group-rule-create --protocol icmp default
+neutron security-group-rule-create --protocol tcp   --port-range-min 22 --port-range-max 22 default
+
+################################
+#
+## Create a new VM 
+#nova boot --poll --flavor m1.nano --image cirros   --nic net-id=d418cb0f-4ccb-4a1b-9fec-5fa23e20d9e7 --key-name demo test0
+#
+################################
--- a/xcat/postscripts/scripts/setup_extnw
+++ b/xcat/postscripts/scripts/setup_extnw
@ -0,0 +1,93 @@
+#!/bin/bash
+
+#################################################################################
+# Copyright Arif Ali - aali@ocf.co.uk, OCF Plc.                                 #
+# Copyright from 2014 to the legal extent of UK law.                            #
+# Distribution is only permitted with written consent from Arif Ali or OCF Plc. #
+#################################################################################
+#                                                                               #
+# Authors: Arif Ali - aali@ocf.co.uk, OCF plc                                   #
+#                                                                               #
+#################################################################################
+
+#
+# This script allows you add the an external gateway and dns for external network
+# access. This is useful for login nodes, or atleast external facing nodes
+# 
+# We just need to set the networkname as referenced in the networks table to use
+# in this script using the -s paramater
+#
+# The script will by default will only work with the login profile, you can change
+# that using the -p flag
+#
+# This is a Linux only script
+#
+
+#set -ax
+
+logger -t xcat "Install: $0 $*"
+
+usage() { echo "$0 -n <netname> [-i <installroot>]" 1>&2; exit 1; }
+
+while getopts i:n:? flag; do
+  case $flag in
+    i)
+      installroot=$OPTARG
+      ;;
+    n)
+      NETNAME=$OPTARG
+      ;;
+    ?)
+      usage
+      ;;
+  esac
+done
+
+[[ -z "$NETNAME" ]] && usage
+[[ -z "$installroot" ]] && installroot=/
+
+num_index=1
+found=0
+
+# go through all the networks defined, and check to see if it is in $NETNAME
+while [ $num_index -le $NETWORKS_LINES ]; do
+  eval str_temp=\$NETWORKS_LINE$num_index
+  str_temp_name=`echo $str_temp | awk -F'netname=' '{print $2}' | awk -F'|' '{print $1}'`
+  if [ "$str_temp_name" = "${NETNAME}" ];then
+      found=1
+      break
+  fi
+  num_index=$((num_index+1))
+done
+
+# If we don't find the defined network, then exit
+[ $found -eq 0 ] && exit 0
+
+# Do the gateway
+str_gateway=`echo $str_temp | awk -F'gateway=' '{print $2}' | awk -F'|' '{print $1}'`
+
+if [ $str_gateway != "" ]; then
+
+  sed -ibak -e '/GATEWAY/d' $installroot/etc/sysconfig/network
+  echo GATEWAY=$str_gateway >> $installroot/etc/sysconfig/network
+
+  ip route del default
+  ip route add default via $str_gateway
+
+fi
+
+# Do the nameservers
+str_nameservers=`echo $str_temp | awk -F'nameservers=' '{print $2}' | awk -F'|' '{print $1}'`
+
+if [[ $str_nameservers != "" ]]; then
+
+  for nameserver in `echo $str_nameservers | tr ',' ' '` ; do
+
+    if [[ ! `grep $nameserver $installroot/etc/resolv.conf` ]] ; then
+      echo "nameserver $nameserver" >> $installroot/etc/resolv.conf
+    fi
+
+    done
+
+fi
+