658 lines
40 KiB
C
658 lines
40 KiB
C
/* Copyright 2007, Google Inc. */
|
||
|
||
#include <debug.h>
|
||
#include <dev/gpio.h>
|
||
#include <kernel/thread.h>
|
||
#include <mddi.h>
|
||
|
||
#define MDDI_CLIENT_CORE_BASE 0x108000
|
||
#define LCD_CONTROL_BLOCK_BASE 0x110000
|
||
#define SPI_BLOCK_BASE 0x120000
|
||
#define I2C_BLOCK_BASE 0x130000
|
||
#define PWM_BLOCK_BASE 0x140000
|
||
#define GPIO_BLOCK_BASE 0x150000
|
||
#define SYSTEM_BLOCK1_BASE 0x160000
|
||
#define SYSTEM_BLOCK2_BASE 0x170000
|
||
|
||
|
||
#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
|
||
#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
|
||
#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
|
||
#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
|
||
#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
|
||
#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
|
||
#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
|
||
#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
|
||
#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
|
||
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
|
||
#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
|
||
#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
|
||
#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
|
||
#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
|
||
#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
|
||
#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
|
||
#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
|
||
#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
|
||
#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
|
||
#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
|
||
#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
|
||
#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
|
||
|
||
|
||
#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
|
||
#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
|
||
#define START (LCD_CONTROL_BLOCK_BASE|0x08)
|
||
#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
|
||
#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
|
||
#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
|
||
#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
|
||
#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
|
||
#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
|
||
#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
|
||
#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
|
||
|
||
#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
|
||
#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
|
||
#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
|
||
#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
|
||
#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
|
||
#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
|
||
#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
|
||
#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
|
||
#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
|
||
#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
|
||
#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
|
||
#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
|
||
#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
|
||
#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
|
||
#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
|
||
#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
|
||
#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
|
||
#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
|
||
#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
|
||
#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
|
||
#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
|
||
#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
|
||
#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
|
||
#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
|
||
|
||
#define MONI (LCD_CONTROL_BLOCK_BASE|0xB0)
|
||
|
||
#define Current (LCD_CONTROL_BLOCK_BASE|0xC0)
|
||
#define LCD (LCD_CONTROL_BLOCK_BASE|0xC4)
|
||
#define COMMAND (LCD_CONTROL_BLOCK_BASE|0xC8)
|
||
|
||
|
||
#define SSICTL (SPI_BLOCK_BASE|0x00)
|
||
#define SSITIME (SPI_BLOCK_BASE|0x04)
|
||
#define SSITX (SPI_BLOCK_BASE|0x08)
|
||
#define SSIRX (SPI_BLOCK_BASE|0x0C)
|
||
#define SSIINTC (SPI_BLOCK_BASE|0x10)
|
||
#define SSIINTS (SPI_BLOCK_BASE|0x14)
|
||
#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
|
||
#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
|
||
#define SSIID (SPI_BLOCK_BASE|0x20)
|
||
|
||
|
||
#define I2CSETUP (I2C_BLOCK_BASE|0x00)
|
||
#define I2CCTRL (I2C_BLOCK_BASE|0x04)
|
||
|
||
|
||
#define TIMER0LOAD (PWM_BLOCK_BASE|0x00)
|
||
#define TIMER0VALUE (PWM_BLOCK_BASE|0x04)
|
||
#define TIMER0CONTROL (PWM_BLOCK_BASE|0x08)
|
||
#define TIMER0INTCLR (PWM_BLOCK_BASE|0x0C)
|
||
#define TIMER0RIS (PWM_BLOCK_BASE|0x10)
|
||
#define TIMER0MIS (PWM_BLOCK_BASE|0x14)
|
||
#define TIMER0BGLOAD (PWM_BLOCK_BASE|0x18)
|
||
#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
|
||
#define TIMER1LOAD (PWM_BLOCK_BASE|0x20)
|
||
#define TIMER1VALUE (PWM_BLOCK_BASE|0x24)
|
||
#define TIMER1CONTROL (PWM_BLOCK_BASE|0x28)
|
||
#define TIMER1INTCLR (PWM_BLOCK_BASE|0x2C)
|
||
#define TIMER1RIS (PWM_BLOCK_BASE|0x30)
|
||
#define TIMER1MIS (PWM_BLOCK_BASE|0x34)
|
||
#define TIMER1BGLOAD (PWM_BLOCK_BASE|0x38)
|
||
#define PWM1OFF (PWM_BLOCK_BASE|0x3C)
|
||
#define TIMERITCR (PWM_BLOCK_BASE|0x60)
|
||
#define TIMERITOP (PWM_BLOCK_BASE|0x64)
|
||
#define PWMCR (PWM_BLOCK_BASE|0x68)
|
||
#define PWMID (PWM_BLOCK_BASE|0x6C)
|
||
#define PWMMON (PWM_BLOCK_BASE|0x70)
|
||
|
||
|
||
#define GPIODATA (GPIO_BLOCK_BASE|0x00)
|
||
#define GPIODIR (GPIO_BLOCK_BASE|0x04)
|
||
#define GPIOIS (GPIO_BLOCK_BASE|0x08)
|
||
#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
|
||
#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
|
||
#define GPIOIE (GPIO_BLOCK_BASE|0x14)
|
||
#define GPIORIS (GPIO_BLOCK_BASE|0x18)
|
||
#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
|
||
#define GPIOIC (GPIO_BLOCK_BASE|0x20)
|
||
#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
|
||
#define GPIOPC (GPIO_BLOCK_BASE|0x28)
|
||
|
||
#define GPIOID (GPIO_BLOCK_BASE|0x30)
|
||
|
||
|
||
#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
|
||
#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
|
||
#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
|
||
#define CNT_DIS (SYSTEM_BLOCK1_BASE|0x10)
|
||
#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
|
||
#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
|
||
|
||
struct init_table {
|
||
unsigned int reg;
|
||
unsigned int val;
|
||
};
|
||
|
||
static struct init_table toshiba_480x800_init_table[] = {
|
||
{ DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters
|
||
{ DPSET1, 0x00000113 }, // # MDC.DPSET1
|
||
{ DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable
|
||
{ DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL
|
||
{ 0, 15 }, // wait_ms(15);
|
||
{ SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output
|
||
{ CLKENB, 0x000000E9 }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK)
|
||
|
||
{ GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0
|
||
{ GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output)
|
||
{ SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control
|
||
{ GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut
|
||
{ SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment
|
||
{ GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO
|
||
{ GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO
|
||
{ GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear
|
||
{ GPIO_BLOCK_BASE, 0x00040004 }, // # GPI .GPIODATA # Release LCDD reset
|
||
{ GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply
|
||
{ DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up
|
||
{ CLKENB, 0x0000A0EB }, // # enable eDRAM clock
|
||
|
||
{ PWMCR, 0x00000000 }, // # PWM.PWMCR # PWM output enable
|
||
{ 0, 1 }, // wait_ms(1);
|
||
{ SPI_BLOCK_BASE, 0x00060399}, // # SPI .SSICTL # SPI operation mode setting
|
||
{ SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting
|
||
{ CNT_DIS, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting
|
||
{ SPI_BLOCK_BASE, 0x0006039B }, // # SPI .SSICTL # Set SPI active mode
|
||
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode
|
||
{ 0, 2 }, // wait_ms(2);
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX
|
||
{ 0, 2 }, // wait_ms(2);
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX
|
||
{ 0, 2 }, // wait_ms(2);
|
||
|
||
{ SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black
|
||
{ SSITX, 0x00080036 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Memory access control
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x0008003A }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000160 }, // # Display mode setup(2)
|
||
{ SSITX, 0x000800B1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0000015D }, // # RGB Interface data format
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000133 }, // # Drivnig method
|
||
{ SSITX, 0x000800B3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000122 }, // # Booster operation setup
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup
|
||
{ SSITX, 0x000800B5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0000011E }, // # VCS Voltage adjustment (1C->1F for Rev 2)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000127 }, // # VCOM Voltage adjustment
|
||
{ SSITX, 0x000800B7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000103 }, // # Configure an external display signal
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B9 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000124 }, // # DCCK/DCEV timing setup
|
||
{ SSITX, 0x000800BD }, // # Command setting of SPI block
|
||
{ SSITX, 0x000001A1 }, // # ASW signal control
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800BB }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation
|
||
{ SSITX, 0x000800BF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # Dummy display (white/black) count setup for QUAD Data operation
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800BE }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # wait_ms(-out FR count setup (A)
|
||
{ SSITX, 0x000800C0 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B)
|
||
{ SSITX, 0x000800C2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080132 }, // # wait_ms(-in line clock count setup (D)
|
||
{ SSITX, 0x00000132 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080132 }, // # Seep-in line clock count setup (E)
|
||
{ SSITX, 0x00000132 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080132 }, // # wait_ms(-in line clock count setup (F)
|
||
{ SSITX, 0x00000132 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080132 }, // # wait_ms(-in line clock setup (G)
|
||
{ SSITX, 0x00000132 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080164 }, // # Gamma 1 fine tuning (1)
|
||
{ SSITX, 0x00000145 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C8 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2)
|
||
{ SSITX, 0x000800C9 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000152 }, // # Gamma 1 inclination adjustment
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800CA }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800EC }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting]
|
||
{ SSITX, 0x000001FC }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800CF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D0 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x00000104 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x00000128 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x00000128 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080126 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x000001A4 }, //
|
||
{ 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000120 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800EF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080132 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ]
|
||
{ SSITX, 0x00000100 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
|
||
{ BITMAP0, 0x032001E0 }, // MDC.BITMAP0 ); // Setup of PITCH size to Frame buffer1
|
||
{ BITMAP1, 0x032001E0 }, // MDC.BITMAP1 ); // Setup of PITCH size to Frame buffer1
|
||
{ BITMAP2, 0x014000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2
|
||
{ BITMAP3, 0x014000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3
|
||
{ BITMAP4, 0x014000F0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4
|
||
{ CLKENB, 0x0000A1EB }, // SYS.CLKENB ); // DCLK supply
|
||
{ PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable
|
||
{ PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active
|
||
{ PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output)
|
||
{ MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer
|
||
{ HCYCLE, 0x000000FD }, // LCD.HCYCLE ); // Setup to VGA size
|
||
{ HSW, 0x00000003 }, // LCD.HSW
|
||
{ HDE_START, 0x00000007 }, // LCD.HDE_START
|
||
{ HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE
|
||
{ VCYCLE, 0x00000325 }, // LCD.VCYCLE
|
||
{ VSW, 0x00000001 }, // LCD.VSW
|
||
{ VDE_START, 0x00000003 }, // LCD.VDE_START
|
||
{ VDE_SIZE, 0x0000031F }, // LCD.VDE_SIZE
|
||
|
||
{ START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start
|
||
|
||
{ 0, 10 }, // wait_ms( 10 );
|
||
{ SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block
|
||
{ SSITX, 0x00000180 }, // Display data setup
|
||
{ SSITX, 0x0008003B }, // Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // Quad Data configuration - VGA
|
||
{ 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
|
||
{ SSITX, 0x000800B0 }, // Command setting of SPI block
|
||
{ SSITX, 0x00000116 }, // Power supply ON/OFF control
|
||
{ 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
|
||
{ SSITX, 0x000800B8 }, // Command setting of SPI block
|
||
{ SSITX, 0x000801FF }, // Output control
|
||
{ SSITX, 0x000001F5 },
|
||
{ 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty
|
||
{ SSITX, 0x00000011 }, // wait_ms(-out (Command only)
|
||
{ SSITX, 0x00000029 }, // Display on (Command only)
|
||
|
||
//{ SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO
|
||
|
||
{ 0, 0 }
|
||
};
|
||
|
||
static struct init_table toshiba_480x640_init_table[] = {
|
||
{ DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters
|
||
{ DPSET1, 0x00000113 }, // # MDC.DPSET1
|
||
{ DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable
|
||
{ DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL
|
||
{ 0, 14 }, // wait_ms(14);
|
||
{ SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output
|
||
{ CLKENB, 0x000000EF }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK)
|
||
{ GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0
|
||
{ GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output)
|
||
{ SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control
|
||
{ GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut
|
||
{ SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment
|
||
{ GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO
|
||
{ GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO
|
||
{ GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear
|
||
{ GPIO_BLOCK_BASE, 0x00060006 }, // # GPI .GPIODATA # Release LCDD reset
|
||
{ GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply
|
||
{ GPIO_BLOCK_BASE, 0x02000200 }, // # GPI .GPIODATA # TEST LED ON
|
||
{ DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up
|
||
{ TIMER0CONTROL, 0x00000060 }, // # PWM.Timer0Control # PWM0 output stop
|
||
{ PWM_BLOCK_BASE, 0x00001388 }, // # PWM.Timer0Load # PWM0 10kHz , Duty 99 (BackLight OFF)
|
||
//{PWM0OFF, 0x00000001 }, // # PWM.PWM0OFF
|
||
#if 0
|
||
{ PWM0OFF, 0x00001387 }, // SURF 100% backlight
|
||
{ PWM0OFF, 0x00000000 }, // FFA 100% backlight
|
||
#endif
|
||
{ PWM0OFF, 0x000009C3 }, // 50% BL
|
||
{ TIMER1CONTROL, 0x00000060 }, // # PWM.Timer1Control # PWM1 output stop
|
||
{ TIMER1LOAD, 0x00001388 }, // # PWM.Timer1Load # PWM1 10kHz , Duty 99 (BackLight OFF)
|
||
//{PWM1OFF, 0x00000001 }, // # PWM.PWM1OFF
|
||
{ PWM1OFF, 0x00001387 },
|
||
{ TIMER0CONTROL, 0x000000E0 }, // # PWM.Timer0Control # PWM0 output start
|
||
{ TIMER1CONTROL, 0x000000E0 }, // # PWM.Timer1Control # PWM1 output start
|
||
{ PWMCR, 0x00000003 }, // # PWM.PWMCR # PWM output enable
|
||
{ 0, 1 }, // wait_ms(1);
|
||
{ SPI_BLOCK_BASE, 0x00000799 }, // # SPI .SSICTL # SPI operation mode setting
|
||
{ SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting
|
||
{ SPI_BLOCK_BASE, 0x0000079b }, // # SPI .SSICTL # Set SPI active mode
|
||
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode
|
||
{ 0, 1 }, // wait_ms(1);
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX
|
||
{ 0, 1 }, // wait_ms(1);
|
||
{ SSITX, 0x00000000 }, // # SPI.SSITX
|
||
{ 0, 1 }, // wait_ms(1);
|
||
{ SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black
|
||
{ SSITX, 0x00080036 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Memory access control
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800BB }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Display mode setup(2)
|
||
{ SSITX, 0x0008003A }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000160 }, // # RGB Interface data format
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800BF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Drivnig method
|
||
{ SSITX, 0x000800B1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0000015D }, // # Booster operation setup
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000133 }, // # Booster mode setup
|
||
{ SSITX, 0x000800B3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000122 }, // # Booster frequencies setup
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup
|
||
{ SSITX, 0x000800B5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0000011F }, // # VCS Voltage adjustment (1C->1F for Rev 2)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000128 }, // # VCOM Voltage adjustment
|
||
{ SSITX, 0x000800B7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000103 }, // # Configure an external display signal
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800B9 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000120 }, // # DCCK/DCEV timing setup
|
||
{ SSITX, 0x000800BD }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000102 }, // # ASW signal control
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800BE }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation
|
||
{ SSITX, 0x000800C0 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B)
|
||
{ SSITX, 0x000800C2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0008010A }, // # wait_ms(-in line clock count setup (D)
|
||
{ SSITX, 0x0000010A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080160 }, // # Seep-in line clock count setup (E)
|
||
{ SSITX, 0x00000160 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080160 }, // # wait_ms(-in line clock count setup (F)
|
||
{ SSITX, 0x00000160 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080160 }, // # wait_ms(-in line clock setup (G)
|
||
{ SSITX, 0x00000160 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080133 }, // # Gamma 1 fine tuning (1)
|
||
{ SSITX, 0x00000143 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800C8 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2)
|
||
{ SSITX, 0x000800C9 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000133 }, // # Gamma 1 inclination adjustment
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800CA }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800EC }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080102 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting]
|
||
{ SSITX, 0x00000118 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800CF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D0 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x00000104 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D1 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x0000013A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x0000013A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080124 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA]
|
||
{ SSITX, 0x0000016E }, //
|
||
{ 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000124 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800ED }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ]
|
||
{ SSITX, 0x0000010A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table2 for QVGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table2 for QVGA]
|
||
{ SSITX, 0x0000010A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D8 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table2 for QVGA]
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800D9 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table2 for QVGA]
|
||
{ SSITX, 0x00000114 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800DE }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table2 for QVGA]
|
||
{ SSITX, 0x00000114 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800DF }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080112 }, // # ASW timing control (1) [PCLK Sync. Table2 for QVGA]
|
||
{ SSITX, 0x0000013F }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E0 }, // # Command setting of SPI block
|
||
{ SSITX, 0x0000010B }, // # ASW timing control (2) [PCLK Sync. Table2 for QVGA]
|
||
{ SSITX, 0x000800E2 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000101 }, // # Built-in oscillator frequency division setup [Frequency division ratio : 2 (60Hq)
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E3 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000136 }, // # Built-in oscillator clock count setup
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E4 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080100 }, // # CKV timing control for using build-in osc
|
||
{ SSITX, 0x00000103 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E5 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080102 }, // # OEV timing control for using build-in osc
|
||
{ SSITX, 0x00000104 }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E6 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000103 }, // # DCEV timing control for using build-in osc
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E7 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00080104 }, // # ASW timing setup for using build-in osc(1)
|
||
{ SSITX, 0x0000010A }, //
|
||
{ 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty
|
||
{ SSITX, 0x000800E8 }, // # Command setting of SPI block
|
||
{ SSITX, 0x00000104 }, // # ASW timing setup for using build-in osc(2)
|
||
|
||
|
||
{ CLKENB, 0x000001EF }, // # SYS.CLKENB # DCLK enable
|
||
{ START, 0x00000000 }, // # LCD.START # LCDC wait_ms( mode
|
||
{ WRSTB, 0x0000003F }, // # LCD.WRSTB # write_client_reg( strobe
|
||
{ RDSTB, 0x00000432 }, // # LCD.RDSTB # Read strobe
|
||
{ PORT_ENB, 0x00000002 }, // # LCD.PORT_ENB # Asynchronous port enable
|
||
{ VSYNIF, 0x00000000 }, // # LCD.VSYNCIF # VSYNC I/F mode set
|
||
{ ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
|
||
{ ASY_DATB, 0x00000001 }, // # Oscillator start
|
||
{ ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
|
||
{ ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
|
||
{ 0, 10 }, // wait_ms(10);
|
||
{ ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # DUMMY write_client_reg(<28>@*NOTE2
|
||
{ ASY_DATB, 0x80000000 }, //
|
||
{ ASY_DATC, 0x80000000 }, //
|
||
{ ASY_DATD, 0x80000000 }, //
|
||
{ ASY_CMDSET, 0x00000009 }, // # LCD.ASY_CMDSET
|
||
{ ASY_CMDSET, 0x00000008 }, // # LCD.ASY_CMDSET
|
||
{ ASY_DATA, 0x80000007 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
|
||
{ ASY_DATB, 0x00004005 }, // # LCD driver control
|
||
{ ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
|
||
{ ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
|
||
{ 0, 20 }, // wait_ms(20);
|
||
{ ASY_DATA, 0x80000059 }, // # LCD.ASY_DATx # Index setting of SUB LCDD
|
||
{ ASY_DATB, 0x00000000 }, // # LTPS I/F control
|
||
{ ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable
|
||
{ ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable
|
||
|
||
{ VSYNIF, 0x00000001 }, // # LCD.VSYNCIF # VSYNC I/F mode OFF
|
||
{ PORT_ENB, 0x00000001 }, // # LCD.PORT_ENB # SYNC I/F output select
|
||
|
||
/******************************/
|
||
|
||
{ VSYNIF, 0x00000001 }, // VSYNC I/F mode OFF
|
||
{ PORT_ENB, 0x00000001 }, // SYNC I/F mode ON
|
||
|
||
{ BITMAP1, 0x01E000F0 }, // MDC.BITMAP2 ); // Setup of PITCH size to Frame buffer1
|
||
{ BITMAP2, 0x01E000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2
|
||
{ BITMAP3, 0x01E000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3
|
||
{ BITMAP4, 0x00DC00B0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4
|
||
{ CLKENB, 0x000001EF }, // SYS.CLKENB ); // DCLK supply
|
||
{ PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable
|
||
{ PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active
|
||
{ PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output)
|
||
{ MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer
|
||
{ HCYCLE, 0x0000010b }, // LCD.HCYCLE ); // Setup to VGA size
|
||
{ HSW, 0x00000003 }, // LCD.HSW
|
||
{ HDE_START, 0x00000007 }, // LCD.HDE_START
|
||
{ HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE
|
||
{ VCYCLE, 0x00000285 }, // LCD.VCYCLE
|
||
{ VSW, 0x00000001 }, // LCD.VSW
|
||
{ VDE_START, 0x00000003 }, // LCD.VDE_START
|
||
{ VDE_SIZE, 0x0000027F }, // LCD.VDE_SIZE
|
||
|
||
{ START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start
|
||
|
||
{ 0, 10 }, // wait_ms( 10 );
|
||
{ SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block
|
||
{ SSITX, 0x00000180 }, // Display data setup
|
||
{ SSITX, 0x0008003B }, // Command setting of SPI block
|
||
{ SSITX, 0x00000100 }, // Quad Data configuration - VGA
|
||
{ 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
|
||
{ SSITX, 0x000800B0 }, // Command setting of SPI block
|
||
{ SSITX, 0x00000116 }, // Power supply ON/OFF control
|
||
{ 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty
|
||
{ SSITX, 0x000800B8 }, // Command setting of SPI block
|
||
{ SSITX, 0x000801FF }, // Output control
|
||
{ SSITX, 0x000001F5 },
|
||
{ 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty
|
||
{ SSITX, 0x00000011 }, // wait_ms(-out (Command only)
|
||
{ SSITX, 0x00000029 }, // Display on (Command only)
|
||
|
||
{ SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO
|
||
|
||
{ 0, 0 }
|
||
};
|
||
|
||
static void _panel_init(struct init_table *init_table)
|
||
{
|
||
unsigned n;
|
||
|
||
dprintf(INFO, "panel_init()\n");
|
||
|
||
n = 0;
|
||
while (init_table[n].reg != 0 || init_table[n].val != 0) {
|
||
if (init_table[n].reg != 0)
|
||
mddi_remote_write(init_table[n].val, init_table[n].reg);
|
||
else
|
||
mdelay(init_table[n].val);
|
||
n++;
|
||
}
|
||
|
||
dprintf(INFO, "panel_init() done\n");
|
||
}
|
||
|
||
void panel_init(struct mddi_client_caps *client_caps)
|
||
{
|
||
switch(client_caps->manufacturer_name) {
|
||
case 0xd263: // Toshiba
|
||
dprintf(INFO, "Found Toshiba panel\n");
|
||
_panel_init(toshiba_480x800_init_table);
|
||
break;
|
||
case 0x4474: //??
|
||
if (client_caps->product_code == 0xc065)
|
||
dprintf(INFO, "Found WVGA panel\n");
|
||
break;
|
||
}
|
||
}
|
||
|
||
void panel_poweron(void)
|
||
{
|
||
gpio_set(88, 0);
|
||
gpio_config(88, GPIO_OUTPUT);
|
||
udelay(10);
|
||
gpio_set(88, 1);
|
||
mdelay(10);
|
||
|
||
//mdelay(1000); // uncomment for second stage boot
|
||
}
|
||
|
||
void panel_backlight(int on)
|
||
{}
|