cLK/lk/platform/qsd8k/gpio_hw.h

119 lines
4.8 KiB
C
Raw Permalink Normal View History

2011-11-06 23:26:22 +00:00
/*
* Copyright (c) 2008, Google Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef __PLATFORM_QSD8K_GPIO_HW_H
#define __PLATFORM_QSD8K_GPIO_HW_H
#define MSM_GPIO1_BASE 0xA9000000
#define MSM_GPIO2_BASE 0xA9100000
#define GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
#define GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
/* output value */
#define GPIO_OUT_0 GPIO1_REG(0x00) /* gpio 15-0 */
#define GPIO_OUT_1 GPIO2_REG(0x00) /* gpio 42-16 */
#define GPIO_OUT_2 GPIO1_REG(0x04) /* gpio 67-43 */
#define GPIO_OUT_3 GPIO1_REG(0x08) /* gpio 94-68 */
#define GPIO_OUT_4 GPIO1_REG(0x0C) /* gpio 103-95 */
#define GPIO_OUT_5 GPIO1_REG(0x10) /* gpio 121-104 */
#define GPIO_OUT_6 GPIO1_REG(0x14) /* gpio 152-122 */
#define GPIO_OUT_7 GPIO1_REG(0x18) /* gpio 164-153 */
/* same pin map as above, output enable */
#define GPIO_OE_0 GPIO1_REG(0x20)
#define GPIO_OE_1 GPIO2_REG(0x08)
#define GPIO_OE_2 GPIO1_REG(0x24)
#define GPIO_OE_3 GPIO1_REG(0x28)
#define GPIO_OE_4 GPIO1_REG(0x2C)
#define GPIO_OE_5 GPIO1_REG(0x30)
#define GPIO_OE_6 GPIO1_REG(0x34)
#define GPIO_OE_7 GPIO1_REG(0x38)
/* same pin map as above, input read */
#define GPIO_IN_0 GPIO1_REG(0x50)
#define GPIO_IN_1 GPIO2_REG(0x20)
#define GPIO_IN_2 GPIO1_REG(0x54)
#define GPIO_IN_3 GPIO1_REG(0x58)
#define GPIO_IN_4 GPIO1_REG(0x5C)
#define GPIO_IN_5 GPIO1_REG(0x60)
#define GPIO_IN_6 GPIO1_REG(0x64)
#define GPIO_IN_7 GPIO1_REG(0x68)
/* same pin map as above, 1=edge 0=level interrup */
#define GPIO_INT_EDGE_0 GPIO1_REG(0x70)
#define GPIO_INT_EDGE_1 GPIO2_REG(0x50)
#define GPIO_INT_EDGE_2 GPIO1_REG(0x74)
#define GPIO_INT_EDGE_3 GPIO1_REG(0x78)
#define GPIO_INT_EDGE_4 GPIO1_REG(0x7C)
#define GPIO_INT_EDGE_5 GPIO1_REG(0x80)
#define GPIO_INT_EDGE_6 GPIO1_REG(0x84)
#define GPIO_INT_EDGE_7 GPIO1_REG(0x88)
/* same pin map as above, 1=positive 0=negative */
#define GPIO_INT_POS_0 GPIO1_REG(0x90)
#define GPIO_INT_POS_1 GPIO2_REG(0x58)
#define GPIO_INT_POS_2 GPIO1_REG(0x94)
#define GPIO_INT_POS_3 GPIO1_REG(0x98)
#define GPIO_INT_POS_4 GPIO1_REG(0x9C)
#define GPIO_INT_POS_5 GPIO1_REG(0xA0)
#define GPIO_INT_POS_6 GPIO1_REG(0xA4)
#define GPIO_INT_POS_7 GPIO1_REG(0xA8)
/* same pin map as above, interrupt enable */
#define GPIO_INT_EN_0 GPIO1_REG(0xB0)
#define GPIO_INT_EN_1 GPIO2_REG(0x60)
#define GPIO_INT_EN_2 GPIO1_REG(0xB4)
#define GPIO_INT_EN_3 GPIO1_REG(0xB8)
#define GPIO_INT_EN_4 GPIO1_REG(0xBC)
#define GPIO_INT_EN_5 GPIO1_REG(0xC0)
#define GPIO_INT_EN_6 GPIO1_REG(0xC4)
#define GPIO_INT_EN_7 GPIO1_REG(0xC8)
/* same pin map as above, write 1 to clear interrupt */
#define GPIO_INT_CLEAR_0 GPIO1_REG(0xD0)
#define GPIO_INT_CLEAR_1 GPIO2_REG(0x68)
#define GPIO_INT_CLEAR_2 GPIO1_REG(0xD4)
#define GPIO_INT_CLEAR_3 GPIO1_REG(0xD8)
#define GPIO_INT_CLEAR_4 GPIO1_REG(0xDC)
#define GPIO_INT_CLEAR_5 GPIO1_REG(0xE0)
#define GPIO_INT_CLEAR_6 GPIO1_REG(0xE4)
#define GPIO_INT_CLEAR_7 GPIO1_REG(0xE8)
/* same pin map as above, 1=interrupt pending */
#define GPIO_INT_STATUS_0 GPIO1_REG(0xF0)
#define GPIO_INT_STATUS_1 GPIO2_REG(0x70)
#define GPIO_INT_STATUS_2 GPIO1_REG(0xF4)
#define GPIO_INT_STATUS_3 GPIO1_REG(0xF8)
#define GPIO_INT_STATUS_4 GPIO1_REG(0xFC)
#define GPIO_INT_STATUS_5 GPIO1_REG(0x100)
#define GPIO_INT_STATUS_6 GPIO1_REG(0x103)
#define GPIO_INT_STATUS_7 GPIO1_REG(0x108)
#endif