4542 lines
		
	
	
		
			119 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			4542 lines
		
	
	
		
			119 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/******************************************************************************
 | 
						|
* This software may be used and distributed according to the terms of
 | 
						|
* the GNU General Public License (GPL), incorporated herein by reference.
 | 
						|
* Drivers based on or derived from this code fall under the GPL and must
 | 
						|
* retain the authorship, copyright and license notice.  This file is not
 | 
						|
* a complete program and may only be used when the entire operating
 | 
						|
* system is licensed under the GPL.
 | 
						|
* See the file COPYING in this distribution for more information.
 | 
						|
*
 | 
						|
* vxge-main.c: Driver for Neterion Inc's X3100 Series 10GbE PCIe I/O
 | 
						|
*              Virtualized Server Adapter.
 | 
						|
* Copyright(c) 2002-2009 Neterion Inc.
 | 
						|
*
 | 
						|
* The module loadable parameters that are supported by the driver and a brief
 | 
						|
* explanation of all the variables:
 | 
						|
* vlan_tag_strip:
 | 
						|
*	Strip VLAN Tag enable/disable. Instructs the device to remove
 | 
						|
*	the VLAN tag from all received tagged frames that are not
 | 
						|
*	replicated at the internal L2 switch.
 | 
						|
*		0 - Do not strip the VLAN tag.
 | 
						|
*		1 - Strip the VLAN tag.
 | 
						|
*
 | 
						|
* addr_learn_en:
 | 
						|
*	Enable learning the mac address of the guest OS interface in
 | 
						|
*	a virtualization environment.
 | 
						|
*		0 - DISABLE
 | 
						|
*		1 - ENABLE
 | 
						|
*
 | 
						|
* max_config_port:
 | 
						|
*	Maximum number of port to be supported.
 | 
						|
*		MIN -1 and MAX - 2
 | 
						|
*
 | 
						|
* max_config_vpath:
 | 
						|
*	This configures the maximum no of VPATH configures for each
 | 
						|
* 	device function.
 | 
						|
*		MIN - 1 and MAX - 17
 | 
						|
*
 | 
						|
* max_config_dev:
 | 
						|
*	This configures maximum no of Device function to be enabled.
 | 
						|
*		MIN - 1 and MAX - 17
 | 
						|
*
 | 
						|
******************************************************************************/
 | 
						|
 | 
						|
#include <linux/if_vlan.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/tcp.h>
 | 
						|
#include <net/ip.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <linux/etherdevice.h>
 | 
						|
#include "vxge-main.h"
 | 
						|
#include "vxge-reg.h"
 | 
						|
 | 
						|
MODULE_LICENSE("Dual BSD/GPL");
 | 
						|
MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O"
 | 
						|
	"Virtualized Server Adapter");
 | 
						|
 | 
						|
static struct pci_device_id vxge_id_table[] __devinitdata = {
 | 
						|
	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID,
 | 
						|
	PCI_ANY_ID},
 | 
						|
	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID,
 | 
						|
	PCI_ANY_ID},
 | 
						|
	{0}
 | 
						|
};
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(pci, vxge_id_table);
 | 
						|
 | 
						|
VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE);
 | 
						|
VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT);
 | 
						|
VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT);
 | 
						|
VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT);
 | 
						|
VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT);
 | 
						|
VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV);
 | 
						|
 | 
						|
static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] =
 | 
						|
		{0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31};
 | 
						|
static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] =
 | 
						|
	{[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF};
 | 
						|
module_param_array(bw_percentage, uint, NULL, 0);
 | 
						|
 | 
						|
static struct vxge_drv_config *driver_config;
 | 
						|
 | 
						|
static inline int is_vxge_card_up(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	return test_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
}
 | 
						|
 | 
						|
static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo)
 | 
						|
{
 | 
						|
	unsigned long flags = 0;
 | 
						|
	struct sk_buff **skb_ptr = NULL;
 | 
						|
	struct sk_buff **temp;
 | 
						|
#define NR_SKB_COMPLETED 128
 | 
						|
	struct sk_buff *completed[NR_SKB_COMPLETED];
 | 
						|
	int more;
 | 
						|
 | 
						|
	do {
 | 
						|
		more = 0;
 | 
						|
		skb_ptr = completed;
 | 
						|
 | 
						|
		if (spin_trylock_irqsave(&fifo->tx_lock, flags)) {
 | 
						|
			vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr,
 | 
						|
						NR_SKB_COMPLETED, &more);
 | 
						|
			spin_unlock_irqrestore(&fifo->tx_lock, flags);
 | 
						|
		}
 | 
						|
		/* free SKBs */
 | 
						|
		for (temp = completed; temp != skb_ptr; temp++)
 | 
						|
			dev_kfree_skb_irq(*temp);
 | 
						|
	} while (more) ;
 | 
						|
}
 | 
						|
 | 
						|
static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* Complete all transmits */
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
		VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo);
 | 
						|
}
 | 
						|
 | 
						|
static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct vxge_ring *ring;
 | 
						|
 | 
						|
	/* Complete all receives*/
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		ring = &vdev->vpaths[i].ring;
 | 
						|
		vxge_hw_vpath_poll_rx(ring->handle);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * MultiQ manipulation helper functions
 | 
						|
 */
 | 
						|
void vxge_stop_all_tx_queue(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct net_device *dev = vdev->ndev;
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_STOP;
 | 
						|
	}
 | 
						|
	netif_tx_stop_all_queues(dev);
 | 
						|
}
 | 
						|
 | 
						|
void vxge_stop_tx_queue(struct vxge_fifo *fifo)
 | 
						|
{
 | 
						|
	struct net_device *dev = fifo->ndev;
 | 
						|
 | 
						|
	struct netdev_queue *txq = NULL;
 | 
						|
	if (fifo->tx_steering_type == TX_MULTIQ_STEERING)
 | 
						|
		txq = netdev_get_tx_queue(dev, fifo->driver_id);
 | 
						|
	else {
 | 
						|
		txq = netdev_get_tx_queue(dev, 0);
 | 
						|
		fifo->queue_state = VPATH_QUEUE_STOP;
 | 
						|
	}
 | 
						|
 | 
						|
	netif_tx_stop_queue(txq);
 | 
						|
}
 | 
						|
 | 
						|
void vxge_start_all_tx_queue(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct net_device *dev = vdev->ndev;
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START;
 | 
						|
	}
 | 
						|
	netif_tx_start_all_queues(dev);
 | 
						|
}
 | 
						|
 | 
						|
static void vxge_wake_all_tx_queue(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct net_device *dev = vdev->ndev;
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START;
 | 
						|
	}
 | 
						|
	netif_tx_wake_all_queues(dev);
 | 
						|
}
 | 
						|
 | 
						|
void vxge_wake_tx_queue(struct vxge_fifo *fifo, struct sk_buff *skb)
 | 
						|
{
 | 
						|
	struct net_device *dev = fifo->ndev;
 | 
						|
 | 
						|
	int vpath_no = fifo->driver_id;
 | 
						|
	struct netdev_queue *txq = NULL;
 | 
						|
	if (fifo->tx_steering_type == TX_MULTIQ_STEERING) {
 | 
						|
		txq = netdev_get_tx_queue(dev, vpath_no);
 | 
						|
		if (netif_tx_queue_stopped(txq))
 | 
						|
			netif_tx_wake_queue(txq);
 | 
						|
	} else {
 | 
						|
		txq = netdev_get_tx_queue(dev, 0);
 | 
						|
		if (fifo->queue_state == VPATH_QUEUE_STOP)
 | 
						|
			if (netif_tx_queue_stopped(txq)) {
 | 
						|
				fifo->queue_state = VPATH_QUEUE_START;
 | 
						|
				netif_tx_wake_queue(txq);
 | 
						|
			}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_callback_link_up
 | 
						|
 *
 | 
						|
 * This function is called during interrupt context to notify link up state
 | 
						|
 * change.
 | 
						|
 */
 | 
						|
void
 | 
						|
vxge_callback_link_up(struct __vxge_hw_device *hldev)
 | 
						|
{
 | 
						|
	struct net_device *dev = hldev->ndev;
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		vdev->ndev->name, __func__, __LINE__);
 | 
						|
	printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name);
 | 
						|
	vdev->stats.link_up++;
 | 
						|
 | 
						|
	netif_carrier_on(vdev->ndev);
 | 
						|
	vxge_wake_all_tx_queue(vdev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_callback_link_down
 | 
						|
 *
 | 
						|
 * This function is called during interrupt context to notify link down state
 | 
						|
 * change.
 | 
						|
 */
 | 
						|
void
 | 
						|
vxge_callback_link_down(struct __vxge_hw_device *hldev)
 | 
						|
{
 | 
						|
	struct net_device *dev = hldev->ndev;
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
 | 
						|
	printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name);
 | 
						|
 | 
						|
	vdev->stats.link_down++;
 | 
						|
	netif_carrier_off(vdev->ndev);
 | 
						|
	vxge_stop_all_tx_queue(vdev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_rx_alloc
 | 
						|
 *
 | 
						|
 * Allocate SKB.
 | 
						|
 */
 | 
						|
static struct sk_buff*
 | 
						|
vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size)
 | 
						|
{
 | 
						|
	struct net_device    *dev;
 | 
						|
	struct sk_buff       *skb;
 | 
						|
	struct vxge_rx_priv *rx_priv;
 | 
						|
 | 
						|
	dev = ring->ndev;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		ring->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
 | 
						|
 | 
						|
	/* try to allocate skb first. this one may fail */
 | 
						|
	skb = netdev_alloc_skb(dev, skb_size +
 | 
						|
	VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
 | 
						|
	if (skb == NULL) {
 | 
						|
		vxge_debug_mem(VXGE_ERR,
 | 
						|
			"%s: out of memory to allocate SKB", dev->name);
 | 
						|
		ring->stats.skb_alloc_fail++;
 | 
						|
		return NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_mem(VXGE_TRACE,
 | 
						|
		"%s: %s:%d  Skb : 0x%p", ring->ndev->name,
 | 
						|
		__func__, __LINE__, skb);
 | 
						|
 | 
						|
	skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
 | 
						|
 | 
						|
	rx_priv->skb = skb;
 | 
						|
	rx_priv->skb_data = NULL;
 | 
						|
	rx_priv->data_size = skb_size;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	return skb;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_rx_map
 | 
						|
 */
 | 
						|
static int vxge_rx_map(void *dtrh, struct vxge_ring *ring)
 | 
						|
{
 | 
						|
	struct vxge_rx_priv *rx_priv;
 | 
						|
	dma_addr_t dma_addr;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		ring->ndev->name, __func__, __LINE__);
 | 
						|
	rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
 | 
						|
 | 
						|
	rx_priv->skb_data = rx_priv->skb->data;
 | 
						|
	dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
 | 
						|
				rx_priv->data_size, PCI_DMA_FROMDEVICE);
 | 
						|
 | 
						|
	if (dma_addr == 0) {
 | 
						|
		ring->stats.pci_map_fail++;
 | 
						|
		return -EIO;
 | 
						|
	}
 | 
						|
	vxge_debug_mem(VXGE_TRACE,
 | 
						|
		"%s: %s:%d  1 buffer mode dma_addr = 0x%llx",
 | 
						|
		ring->ndev->name, __func__, __LINE__,
 | 
						|
		(unsigned long long)dma_addr);
 | 
						|
	vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size);
 | 
						|
 | 
						|
	rx_priv->data_dma = dma_addr;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_rx_initial_replenish
 | 
						|
 * Allocation of RxD as an initial replenish procedure.
 | 
						|
 */
 | 
						|
static enum vxge_hw_status
 | 
						|
vxge_rx_initial_replenish(void *dtrh, void *userdata)
 | 
						|
{
 | 
						|
	struct vxge_ring *ring = (struct vxge_ring *)userdata;
 | 
						|
	struct vxge_rx_priv *rx_priv;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		ring->ndev->name, __func__, __LINE__);
 | 
						|
	if (vxge_rx_alloc(dtrh, ring,
 | 
						|
			  VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL)
 | 
						|
		return VXGE_HW_FAIL;
 | 
						|
 | 
						|
	if (vxge_rx_map(dtrh, ring)) {
 | 
						|
		rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
 | 
						|
		dev_kfree_skb(rx_priv->skb);
 | 
						|
 | 
						|
		return VXGE_HW_FAIL;
 | 
						|
	}
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	return VXGE_HW_OK;
 | 
						|
}
 | 
						|
 | 
						|
static inline void
 | 
						|
vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan,
 | 
						|
		 int pkt_length, struct vxge_hw_ring_rxd_info *ext_info)
 | 
						|
{
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
			ring->ndev->name, __func__, __LINE__);
 | 
						|
	skb_record_rx_queue(skb, ring->driver_id);
 | 
						|
	skb->protocol = eth_type_trans(skb, ring->ndev);
 | 
						|
 | 
						|
	ring->stats.rx_frms++;
 | 
						|
	ring->stats.rx_bytes += pkt_length;
 | 
						|
 | 
						|
	if (skb->pkt_type == PACKET_MULTICAST)
 | 
						|
		ring->stats.rx_mcast++;
 | 
						|
 | 
						|
	vxge_debug_rx(VXGE_TRACE,
 | 
						|
		"%s: %s:%d  skb protocol = %d",
 | 
						|
		ring->ndev->name, __func__, __LINE__, skb->protocol);
 | 
						|
 | 
						|
	if (ring->gro_enable) {
 | 
						|
		if (ring->vlgrp && ext_info->vlan &&
 | 
						|
			(ring->vlan_tag_strip ==
 | 
						|
				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
 | 
						|
			vlan_gro_receive(ring->napi_p, ring->vlgrp,
 | 
						|
					ext_info->vlan, skb);
 | 
						|
		else
 | 
						|
			napi_gro_receive(ring->napi_p, skb);
 | 
						|
	} else {
 | 
						|
		if (ring->vlgrp && vlan &&
 | 
						|
			(ring->vlan_tag_strip ==
 | 
						|
				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
 | 
						|
			vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan);
 | 
						|
		else
 | 
						|
			netif_receive_skb(skb);
 | 
						|
	}
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring,
 | 
						|
				    struct vxge_rx_priv *rx_priv)
 | 
						|
{
 | 
						|
	pci_dma_sync_single_for_device(ring->pdev,
 | 
						|
		rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE);
 | 
						|
 | 
						|
	vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size);
 | 
						|
	vxge_hw_ring_rxd_pre_post(ring->handle, dtr);
 | 
						|
}
 | 
						|
 | 
						|
static inline void vxge_post(int *dtr_cnt, void **first_dtr,
 | 
						|
			     void *post_dtr, struct __vxge_hw_ring *ringh)
 | 
						|
{
 | 
						|
	int dtr_count = *dtr_cnt;
 | 
						|
	if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) {
 | 
						|
		if (*first_dtr)
 | 
						|
			vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr);
 | 
						|
		*first_dtr = post_dtr;
 | 
						|
	} else
 | 
						|
		vxge_hw_ring_rxd_post_post(ringh, post_dtr);
 | 
						|
	dtr_count++;
 | 
						|
	*dtr_cnt = dtr_count;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_rx_1b_compl
 | 
						|
 *
 | 
						|
 * If the interrupt is because of a received frame or if the receive ring
 | 
						|
 * contains fresh as yet un-processed frames, this function is called.
 | 
						|
 */
 | 
						|
enum vxge_hw_status
 | 
						|
vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 | 
						|
		 u8 t_code, void *userdata)
 | 
						|
{
 | 
						|
	struct vxge_ring *ring = (struct vxge_ring *)userdata;
 | 
						|
	struct  net_device *dev = ring->ndev;
 | 
						|
	unsigned int dma_sizes;
 | 
						|
	void *first_dtr = NULL;
 | 
						|
	int dtr_cnt = 0;
 | 
						|
	int data_size;
 | 
						|
	dma_addr_t data_dma;
 | 
						|
	int pkt_length;
 | 
						|
	struct sk_buff *skb;
 | 
						|
	struct vxge_rx_priv *rx_priv;
 | 
						|
	struct vxge_hw_ring_rxd_info ext_info;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		ring->ndev->name, __func__, __LINE__);
 | 
						|
	ring->pkts_processed = 0;
 | 
						|
 | 
						|
	vxge_hw_ring_replenish(ringh, 0);
 | 
						|
 | 
						|
	do {
 | 
						|
		prefetch((char *)dtr + L1_CACHE_BYTES);
 | 
						|
		rx_priv = vxge_hw_ring_rxd_private_get(dtr);
 | 
						|
		skb = rx_priv->skb;
 | 
						|
		data_size = rx_priv->data_size;
 | 
						|
		data_dma = rx_priv->data_dma;
 | 
						|
		prefetch(rx_priv->skb_data);
 | 
						|
 | 
						|
		vxge_debug_rx(VXGE_TRACE,
 | 
						|
			"%s: %s:%d  skb = 0x%p",
 | 
						|
			ring->ndev->name, __func__, __LINE__, skb);
 | 
						|
 | 
						|
		vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes);
 | 
						|
		pkt_length = dma_sizes;
 | 
						|
 | 
						|
		pkt_length -= ETH_FCS_LEN;
 | 
						|
 | 
						|
		vxge_debug_rx(VXGE_TRACE,
 | 
						|
			"%s: %s:%d  Packet Length = %d",
 | 
						|
			ring->ndev->name, __func__, __LINE__, pkt_length);
 | 
						|
 | 
						|
		vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info);
 | 
						|
 | 
						|
		/* check skb validity */
 | 
						|
		vxge_assert(skb);
 | 
						|
 | 
						|
		prefetch((char *)skb + L1_CACHE_BYTES);
 | 
						|
		if (unlikely(t_code)) {
 | 
						|
 | 
						|
			if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) !=
 | 
						|
				VXGE_HW_OK) {
 | 
						|
 | 
						|
				ring->stats.rx_errors++;
 | 
						|
				vxge_debug_rx(VXGE_TRACE,
 | 
						|
					"%s: %s :%d Rx T_code is %d",
 | 
						|
					ring->ndev->name, __func__,
 | 
						|
					__LINE__, t_code);
 | 
						|
 | 
						|
				/* If the t_code is not supported and if the
 | 
						|
				 * t_code is other than 0x5 (unparseable packet
 | 
						|
				 * such as unknown UPV6 header), Drop it !!!
 | 
						|
				 */
 | 
						|
				vxge_re_pre_post(dtr, ring, rx_priv);
 | 
						|
 | 
						|
				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
 | 
						|
				ring->stats.rx_dropped++;
 | 
						|
				continue;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) {
 | 
						|
 | 
						|
			if (vxge_rx_alloc(dtr, ring, data_size) != NULL) {
 | 
						|
 | 
						|
				if (!vxge_rx_map(dtr, ring)) {
 | 
						|
					skb_put(skb, pkt_length);
 | 
						|
 | 
						|
					pci_unmap_single(ring->pdev, data_dma,
 | 
						|
						data_size, PCI_DMA_FROMDEVICE);
 | 
						|
 | 
						|
					vxge_hw_ring_rxd_pre_post(ringh, dtr);
 | 
						|
					vxge_post(&dtr_cnt, &first_dtr, dtr,
 | 
						|
						ringh);
 | 
						|
				} else {
 | 
						|
					dev_kfree_skb(rx_priv->skb);
 | 
						|
					rx_priv->skb = skb;
 | 
						|
					rx_priv->data_size = data_size;
 | 
						|
					vxge_re_pre_post(dtr, ring, rx_priv);
 | 
						|
 | 
						|
					vxge_post(&dtr_cnt, &first_dtr, dtr,
 | 
						|
						ringh);
 | 
						|
					ring->stats.rx_dropped++;
 | 
						|
					break;
 | 
						|
				}
 | 
						|
			} else {
 | 
						|
				vxge_re_pre_post(dtr, ring, rx_priv);
 | 
						|
 | 
						|
				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
 | 
						|
				ring->stats.rx_dropped++;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			struct sk_buff *skb_up;
 | 
						|
 | 
						|
			skb_up = netdev_alloc_skb(dev, pkt_length +
 | 
						|
				VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
 | 
						|
			if (skb_up != NULL) {
 | 
						|
				skb_reserve(skb_up,
 | 
						|
				    VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
 | 
						|
 | 
						|
				pci_dma_sync_single_for_cpu(ring->pdev,
 | 
						|
					data_dma, data_size,
 | 
						|
					PCI_DMA_FROMDEVICE);
 | 
						|
 | 
						|
				vxge_debug_mem(VXGE_TRACE,
 | 
						|
					"%s: %s:%d  skb_up = %p",
 | 
						|
					ring->ndev->name, __func__,
 | 
						|
					__LINE__, skb);
 | 
						|
				memcpy(skb_up->data, skb->data, pkt_length);
 | 
						|
 | 
						|
				vxge_re_pre_post(dtr, ring, rx_priv);
 | 
						|
 | 
						|
				vxge_post(&dtr_cnt, &first_dtr, dtr,
 | 
						|
					ringh);
 | 
						|
				/* will netif_rx small SKB instead */
 | 
						|
				skb = skb_up;
 | 
						|
				skb_put(skb, pkt_length);
 | 
						|
			} else {
 | 
						|
				vxge_re_pre_post(dtr, ring, rx_priv);
 | 
						|
 | 
						|
				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
 | 
						|
				vxge_debug_rx(VXGE_ERR,
 | 
						|
					"%s: vxge_rx_1b_compl: out of "
 | 
						|
					"memory", dev->name);
 | 
						|
				ring->stats.skb_alloc_fail++;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) &&
 | 
						|
		    !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) &&
 | 
						|
		    ring->rx_csum && /* Offload Rx side CSUM */
 | 
						|
		    ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK &&
 | 
						|
		    ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK)
 | 
						|
			skb->ip_summed = CHECKSUM_UNNECESSARY;
 | 
						|
		else
 | 
						|
			skb->ip_summed = CHECKSUM_NONE;
 | 
						|
 | 
						|
		vxge_rx_complete(ring, skb, ext_info.vlan,
 | 
						|
			pkt_length, &ext_info);
 | 
						|
 | 
						|
		ring->budget--;
 | 
						|
		ring->pkts_processed++;
 | 
						|
		if (!ring->budget)
 | 
						|
			break;
 | 
						|
 | 
						|
	} while (vxge_hw_ring_rxd_next_completed(ringh, &dtr,
 | 
						|
		&t_code) == VXGE_HW_OK);
 | 
						|
 | 
						|
	if (first_dtr)
 | 
						|
		vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
				"%s:%d  Exiting...",
 | 
						|
				__func__, __LINE__);
 | 
						|
	return VXGE_HW_OK;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_xmit_compl
 | 
						|
 *
 | 
						|
 * If an interrupt was raised to indicate DMA complete of the Tx packet,
 | 
						|
 * this function is called. It identifies the last TxD whose buffer was
 | 
						|
 * freed and frees all skbs whose data have already DMA'ed into the NICs
 | 
						|
 * internal memory.
 | 
						|
 */
 | 
						|
enum vxge_hw_status
 | 
						|
vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
 | 
						|
		enum vxge_hw_fifo_tcode t_code, void *userdata,
 | 
						|
		struct sk_buff ***skb_ptr, int nr_skb, int *more)
 | 
						|
{
 | 
						|
	struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
 | 
						|
	struct sk_buff *skb, **done_skb = *skb_ptr;
 | 
						|
	int pkt_cnt = 0;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d Entered....", __func__, __LINE__);
 | 
						|
 | 
						|
	do {
 | 
						|
		int frg_cnt;
 | 
						|
		skb_frag_t *frag;
 | 
						|
		int i = 0, j;
 | 
						|
		struct vxge_tx_priv *txd_priv =
 | 
						|
			vxge_hw_fifo_txdl_private_get(dtr);
 | 
						|
 | 
						|
		skb = txd_priv->skb;
 | 
						|
		frg_cnt = skb_shinfo(skb)->nr_frags;
 | 
						|
		frag = &skb_shinfo(skb)->frags[0];
 | 
						|
 | 
						|
		vxge_debug_tx(VXGE_TRACE,
 | 
						|
				"%s: %s:%d fifo_hw = %p dtr = %p "
 | 
						|
				"tcode = 0x%x", fifo->ndev->name, __func__,
 | 
						|
				__LINE__, fifo_hw, dtr, t_code);
 | 
						|
		/* check skb validity */
 | 
						|
		vxge_assert(skb);
 | 
						|
		vxge_debug_tx(VXGE_TRACE,
 | 
						|
			"%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d",
 | 
						|
			fifo->ndev->name, __func__, __LINE__,
 | 
						|
			skb, txd_priv, frg_cnt);
 | 
						|
		if (unlikely(t_code)) {
 | 
						|
			fifo->stats.tx_errors++;
 | 
						|
			vxge_debug_tx(VXGE_ERR,
 | 
						|
				"%s: tx: dtr %p completed due to "
 | 
						|
				"error t_code %01x", fifo->ndev->name,
 | 
						|
				dtr, t_code);
 | 
						|
			vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code);
 | 
						|
		}
 | 
						|
 | 
						|
		/*  for unfragmented skb */
 | 
						|
		pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
 | 
						|
				skb_headlen(skb), PCI_DMA_TODEVICE);
 | 
						|
 | 
						|
		for (j = 0; j < frg_cnt; j++) {
 | 
						|
			pci_unmap_page(fifo->pdev,
 | 
						|
					txd_priv->dma_buffers[i++],
 | 
						|
					frag->size, PCI_DMA_TODEVICE);
 | 
						|
			frag += 1;
 | 
						|
		}
 | 
						|
 | 
						|
		vxge_hw_fifo_txdl_free(fifo_hw, dtr);
 | 
						|
 | 
						|
		/* Updating the statistics block */
 | 
						|
		fifo->stats.tx_frms++;
 | 
						|
		fifo->stats.tx_bytes += skb->len;
 | 
						|
 | 
						|
		*done_skb++ = skb;
 | 
						|
 | 
						|
		if (--nr_skb <= 0) {
 | 
						|
			*more = 1;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		pkt_cnt++;
 | 
						|
		if (pkt_cnt > fifo->indicate_max_pkts)
 | 
						|
			break;
 | 
						|
 | 
						|
	} while (vxge_hw_fifo_txdl_next_completed(fifo_hw,
 | 
						|
				&dtr, &t_code) == VXGE_HW_OK);
 | 
						|
 | 
						|
	*skb_ptr = done_skb;
 | 
						|
	vxge_wake_tx_queue(fifo, skb);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
				"%s: %s:%d  Exiting...",
 | 
						|
				fifo->ndev->name, __func__, __LINE__);
 | 
						|
	return VXGE_HW_OK;
 | 
						|
}
 | 
						|
 | 
						|
/* select a vpath to transmit the packet */
 | 
						|
static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb,
 | 
						|
	int *do_lock)
 | 
						|
{
 | 
						|
	u16 queue_len, counter = 0;
 | 
						|
	if (skb->protocol == htons(ETH_P_IP)) {
 | 
						|
		struct iphdr *ip;
 | 
						|
		struct tcphdr *th;
 | 
						|
 | 
						|
		ip = ip_hdr(skb);
 | 
						|
 | 
						|
		if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
 | 
						|
			th = (struct tcphdr *)(((unsigned char *)ip) +
 | 
						|
					ip->ihl*4);
 | 
						|
 | 
						|
			queue_len = vdev->no_of_vpath;
 | 
						|
			counter = (ntohs(th->source) +
 | 
						|
				ntohs(th->dest)) &
 | 
						|
				vdev->vpath_selector[queue_len - 1];
 | 
						|
			if (counter >= queue_len)
 | 
						|
				counter = queue_len - 1;
 | 
						|
 | 
						|
			if (ip->protocol == IPPROTO_UDP) {
 | 
						|
#ifdef NETIF_F_LLTX
 | 
						|
				*do_lock = 0;
 | 
						|
#endif
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return counter;
 | 
						|
}
 | 
						|
 | 
						|
static enum vxge_hw_status vxge_search_mac_addr_in_list(
 | 
						|
	struct vxge_vpath *vpath, u64 del_mac)
 | 
						|
{
 | 
						|
	struct list_head *entry, *next;
 | 
						|
	list_for_each_safe(entry, next, &vpath->mac_addr_list) {
 | 
						|
		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac)
 | 
						|
			return TRUE;
 | 
						|
	}
 | 
						|
	return FALSE;
 | 
						|
}
 | 
						|
 | 
						|
static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header)
 | 
						|
{
 | 
						|
	struct macInfo mac_info;
 | 
						|
	u8 *mac_address = NULL;
 | 
						|
	u64 mac_addr = 0, vpath_vector = 0;
 | 
						|
	int vpath_idx = 0;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxge_vpath *vpath = NULL;
 | 
						|
	struct __vxge_hw_device *hldev;
 | 
						|
 | 
						|
	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
	mac_address = (u8 *)&mac_addr;
 | 
						|
	memcpy(mac_address, mac_header, ETH_ALEN);
 | 
						|
 | 
						|
	/* Is this mac address already in the list? */
 | 
						|
	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
 | 
						|
		vpath = &vdev->vpaths[vpath_idx];
 | 
						|
		if (vxge_search_mac_addr_in_list(vpath, mac_addr))
 | 
						|
			return vpath_idx;
 | 
						|
	}
 | 
						|
 | 
						|
	memset(&mac_info, 0, sizeof(struct macInfo));
 | 
						|
	memcpy(mac_info.macaddr, mac_header, ETH_ALEN);
 | 
						|
 | 
						|
	/* Any vpath has room to add mac address to its da table? */
 | 
						|
	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
 | 
						|
		vpath = &vdev->vpaths[vpath_idx];
 | 
						|
		if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) {
 | 
						|
			/* Add this mac address to this vpath */
 | 
						|
			mac_info.vpath_no = vpath_idx;
 | 
						|
			mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
 | 
						|
			status = vxge_add_mac_addr(vdev, &mac_info);
 | 
						|
			if (status != VXGE_HW_OK)
 | 
						|
				return -EPERM;
 | 
						|
			return vpath_idx;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST;
 | 
						|
	vpath_idx = 0;
 | 
						|
	mac_info.vpath_no = vpath_idx;
 | 
						|
	/* Is the first vpath already selected as catch-basin ? */
 | 
						|
	vpath = &vdev->vpaths[vpath_idx];
 | 
						|
	if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) {
 | 
						|
		/* Add this mac address to this vpath */
 | 
						|
		if (FALSE == vxge_mac_list_add(vpath, &mac_info))
 | 
						|
			return -EPERM;
 | 
						|
		return vpath_idx;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Select first vpath as catch-basin */
 | 
						|
	vpath_vector = vxge_mBIT(vpath->device_id);
 | 
						|
	status = vxge_hw_mgmt_reg_write(vpath->vdev->devh,
 | 
						|
				vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
				0,
 | 
						|
				(ulong)offsetof(
 | 
						|
					struct vxge_hw_mrpcim_reg,
 | 
						|
					rts_mgr_cbasin_cfg),
 | 
						|
				vpath_vector);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_tx(VXGE_ERR,
 | 
						|
			"%s: Unable to set the vpath-%d in catch-basin mode",
 | 
						|
			VXGE_DRIVER_NAME, vpath->device_id);
 | 
						|
		return -EPERM;
 | 
						|
	}
 | 
						|
 | 
						|
	if (FALSE == vxge_mac_list_add(vpath, &mac_info))
 | 
						|
		return -EPERM;
 | 
						|
 | 
						|
	return vpath_idx;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_xmit
 | 
						|
 * @skb : the socket buffer containing the Tx data.
 | 
						|
 * @dev : device pointer.
 | 
						|
 *
 | 
						|
 * This function is the Tx entry point of the driver. Neterion NIC supports
 | 
						|
 * certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
 | 
						|
 * NOTE: when device cant queue the pkt, just the trans_start variable will
 | 
						|
 * not be upadted.
 | 
						|
*/
 | 
						|
static netdev_tx_t
 | 
						|
vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 | 
						|
{
 | 
						|
	struct vxge_fifo *fifo = NULL;
 | 
						|
	void *dtr_priv;
 | 
						|
	void *dtr = NULL;
 | 
						|
	struct vxgedev *vdev = NULL;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	int frg_cnt, first_frg_len;
 | 
						|
	skb_frag_t *frag;
 | 
						|
	int i = 0, j = 0, avail;
 | 
						|
	u64 dma_pointer;
 | 
						|
	struct vxge_tx_priv *txdl_priv = NULL;
 | 
						|
	struct __vxge_hw_fifo *fifo_hw;
 | 
						|
	int offload_type;
 | 
						|
	unsigned long flags = 0;
 | 
						|
	int vpath_no = 0;
 | 
						|
	int do_spin_tx_lock = 1;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
			dev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	/* A buffer with no data will be dropped */
 | 
						|
	if (unlikely(skb->len <= 0)) {
 | 
						|
		vxge_debug_tx(VXGE_ERR,
 | 
						|
			"%s: Buffer has no data..", dev->name);
 | 
						|
		dev_kfree_skb(skb);
 | 
						|
		return NETDEV_TX_OK;
 | 
						|
	}
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev))) {
 | 
						|
		vxge_debug_tx(VXGE_ERR,
 | 
						|
			"%s: vdev not initialized", dev->name);
 | 
						|
		dev_kfree_skb(skb);
 | 
						|
		return NETDEV_TX_OK;
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.addr_learn_en) {
 | 
						|
		vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN);
 | 
						|
		if (vpath_no == -EPERM) {
 | 
						|
			vxge_debug_tx(VXGE_ERR,
 | 
						|
				"%s: Failed to store the mac address",
 | 
						|
				dev->name);
 | 
						|
			dev_kfree_skb(skb);
 | 
						|
			return NETDEV_TX_OK;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING)
 | 
						|
		vpath_no = skb_get_queue_mapping(skb);
 | 
						|
	else if (vdev->config.tx_steering_type == TX_PORT_STEERING)
 | 
						|
		vpath_no = vxge_get_vpath_no(vdev, skb, &do_spin_tx_lock);
 | 
						|
 | 
						|
	vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no);
 | 
						|
 | 
						|
	if (vpath_no >= vdev->no_of_vpath)
 | 
						|
		vpath_no = 0;
 | 
						|
 | 
						|
	fifo = &vdev->vpaths[vpath_no].fifo;
 | 
						|
	fifo_hw = fifo->handle;
 | 
						|
 | 
						|
	if (do_spin_tx_lock)
 | 
						|
		spin_lock_irqsave(&fifo->tx_lock, flags);
 | 
						|
	else {
 | 
						|
		if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
 | 
						|
			return NETDEV_TX_LOCKED;
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) {
 | 
						|
		if (netif_subqueue_stopped(dev, skb)) {
 | 
						|
			spin_unlock_irqrestore(&fifo->tx_lock, flags);
 | 
						|
			return NETDEV_TX_BUSY;
 | 
						|
		}
 | 
						|
	} else if (unlikely(fifo->queue_state == VPATH_QUEUE_STOP)) {
 | 
						|
		if (netif_queue_stopped(dev)) {
 | 
						|
			spin_unlock_irqrestore(&fifo->tx_lock, flags);
 | 
						|
			return NETDEV_TX_BUSY;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw);
 | 
						|
	if (avail == 0) {
 | 
						|
		vxge_debug_tx(VXGE_ERR,
 | 
						|
			"%s: No free TXDs available", dev->name);
 | 
						|
		fifo->stats.txd_not_free++;
 | 
						|
		vxge_stop_tx_queue(fifo);
 | 
						|
		goto _exit2;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Last TXD?  Stop tx queue to avoid dropping packets.  TX
 | 
						|
	 * completion will resume the queue.
 | 
						|
	 */
 | 
						|
	if (avail == 1)
 | 
						|
		vxge_stop_tx_queue(fifo);
 | 
						|
 | 
						|
	status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv);
 | 
						|
	if (unlikely(status != VXGE_HW_OK)) {
 | 
						|
		vxge_debug_tx(VXGE_ERR,
 | 
						|
		   "%s: Out of descriptors .", dev->name);
 | 
						|
		fifo->stats.txd_out_of_desc++;
 | 
						|
		vxge_stop_tx_queue(fifo);
 | 
						|
		goto _exit2;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_tx(VXGE_TRACE,
 | 
						|
		"%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p",
 | 
						|
		dev->name, __func__, __LINE__,
 | 
						|
		fifo_hw, dtr, dtr_priv);
 | 
						|
 | 
						|
	if (vdev->vlgrp && vlan_tx_tag_present(skb)) {
 | 
						|
		u16 vlan_tag = vlan_tx_tag_get(skb);
 | 
						|
		vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag);
 | 
						|
	}
 | 
						|
 | 
						|
	first_frg_len = skb_headlen(skb);
 | 
						|
 | 
						|
	dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len,
 | 
						|
				PCI_DMA_TODEVICE);
 | 
						|
 | 
						|
	if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) {
 | 
						|
		vxge_hw_fifo_txdl_free(fifo_hw, dtr);
 | 
						|
		vxge_stop_tx_queue(fifo);
 | 
						|
		fifo->stats.pci_map_fail++;
 | 
						|
		goto _exit2;
 | 
						|
	}
 | 
						|
 | 
						|
	txdl_priv = vxge_hw_fifo_txdl_private_get(dtr);
 | 
						|
	txdl_priv->skb = skb;
 | 
						|
	txdl_priv->dma_buffers[j] = dma_pointer;
 | 
						|
 | 
						|
	frg_cnt = skb_shinfo(skb)->nr_frags;
 | 
						|
	vxge_debug_tx(VXGE_TRACE,
 | 
						|
			"%s: %s:%d skb = %p txdl_priv = %p "
 | 
						|
			"frag_cnt = %d dma_pointer = 0x%llx", dev->name,
 | 
						|
			__func__, __LINE__, skb, txdl_priv,
 | 
						|
			frg_cnt, (unsigned long long)dma_pointer);
 | 
						|
 | 
						|
	vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
 | 
						|
		first_frg_len);
 | 
						|
 | 
						|
	frag = &skb_shinfo(skb)->frags[0];
 | 
						|
	for (i = 0; i < frg_cnt; i++) {
 | 
						|
		/* ignore 0 length fragment */
 | 
						|
		if (!frag->size)
 | 
						|
			continue;
 | 
						|
 | 
						|
		dma_pointer =
 | 
						|
			(u64)pci_map_page(fifo->pdev, frag->page,
 | 
						|
				frag->page_offset, frag->size,
 | 
						|
				PCI_DMA_TODEVICE);
 | 
						|
 | 
						|
		if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer)))
 | 
						|
			goto _exit0;
 | 
						|
		vxge_debug_tx(VXGE_TRACE,
 | 
						|
			"%s: %s:%d frag = %d dma_pointer = 0x%llx",
 | 
						|
				dev->name, __func__, __LINE__, i,
 | 
						|
				(unsigned long long)dma_pointer);
 | 
						|
 | 
						|
		txdl_priv->dma_buffers[j] = dma_pointer;
 | 
						|
		vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
 | 
						|
					frag->size);
 | 
						|
		frag += 1;
 | 
						|
	}
 | 
						|
 | 
						|
	offload_type = vxge_offload_type(skb);
 | 
						|
 | 
						|
	if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
 | 
						|
 | 
						|
		int mss = vxge_tcp_mss(skb);
 | 
						|
		if (mss) {
 | 
						|
			vxge_debug_tx(VXGE_TRACE,
 | 
						|
				"%s: %s:%d mss = %d",
 | 
						|
				dev->name, __func__, __LINE__, mss);
 | 
						|
			vxge_hw_fifo_txdl_mss_set(dtr, mss);
 | 
						|
		} else {
 | 
						|
			vxge_assert(skb->len <=
 | 
						|
				dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE);
 | 
						|
			vxge_assert(0);
 | 
						|
			goto _exit1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (skb->ip_summed == CHECKSUM_PARTIAL)
 | 
						|
		vxge_hw_fifo_txdl_cksum_set_bits(dtr,
 | 
						|
					VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN |
 | 
						|
					VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN |
 | 
						|
					VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN);
 | 
						|
 | 
						|
	vxge_hw_fifo_txdl_post(fifo_hw, dtr);
 | 
						|
#ifdef NETIF_F_LLTX
 | 
						|
	dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
 | 
						|
#endif
 | 
						|
	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 | 
						|
 | 
						|
	VXGE_COMPLETE_VPATH_TX(fifo);
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
 | 
						|
		dev->name, __func__, __LINE__);
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
 | 
						|
_exit0:
 | 
						|
	vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name);
 | 
						|
 | 
						|
_exit1:
 | 
						|
	j = 0;
 | 
						|
	frag = &skb_shinfo(skb)->frags[0];
 | 
						|
 | 
						|
	pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++],
 | 
						|
			skb_headlen(skb), PCI_DMA_TODEVICE);
 | 
						|
 | 
						|
	for (; j < i; j++) {
 | 
						|
		pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j],
 | 
						|
			frag->size, PCI_DMA_TODEVICE);
 | 
						|
		frag += 1;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_hw_fifo_txdl_free(fifo_hw, dtr);
 | 
						|
_exit2:
 | 
						|
	dev_kfree_skb(skb);
 | 
						|
	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 | 
						|
	VXGE_COMPLETE_VPATH_TX(fifo);
 | 
						|
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_rx_term
 | 
						|
 *
 | 
						|
 * Function will be called by hw function to abort all outstanding receive
 | 
						|
 * descriptors.
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata)
 | 
						|
{
 | 
						|
	struct vxge_ring *ring = (struct vxge_ring *)userdata;
 | 
						|
	struct vxge_rx_priv *rx_priv =
 | 
						|
		vxge_hw_ring_rxd_private_get(dtrh);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
			ring->ndev->name, __func__, __LINE__);
 | 
						|
	if (state != VXGE_HW_RXD_STATE_POSTED)
 | 
						|
		return;
 | 
						|
 | 
						|
	pci_unmap_single(ring->pdev, rx_priv->data_dma,
 | 
						|
		rx_priv->data_size, PCI_DMA_FROMDEVICE);
 | 
						|
 | 
						|
	dev_kfree_skb(rx_priv->skb);
 | 
						|
	rx_priv->skb_data = NULL;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d  Exiting...",
 | 
						|
		ring->ndev->name, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_tx_term
 | 
						|
 *
 | 
						|
 * Function will be called to abort all outstanding tx descriptors
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata)
 | 
						|
{
 | 
						|
	struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
 | 
						|
	skb_frag_t *frag;
 | 
						|
	int i = 0, j, frg_cnt;
 | 
						|
	struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh);
 | 
						|
	struct sk_buff *skb = txd_priv->skb;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	if (state != VXGE_HW_TXDL_STATE_POSTED)
 | 
						|
		return;
 | 
						|
 | 
						|
	/* check skb validity */
 | 
						|
	vxge_assert(skb);
 | 
						|
	frg_cnt = skb_shinfo(skb)->nr_frags;
 | 
						|
	frag = &skb_shinfo(skb)->frags[0];
 | 
						|
 | 
						|
	/*  for unfragmented skb */
 | 
						|
	pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
 | 
						|
		skb_headlen(skb), PCI_DMA_TODEVICE);
 | 
						|
 | 
						|
	for (j = 0; j < frg_cnt; j++) {
 | 
						|
		pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++],
 | 
						|
			       frag->size, PCI_DMA_TODEVICE);
 | 
						|
		frag += 1;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_kfree_skb(skb);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_set_multicast
 | 
						|
 * @dev: pointer to the device structure
 | 
						|
 *
 | 
						|
 * Entry point for multicast address enable/disable
 | 
						|
 * This function is a driver entry point which gets called by the kernel
 | 
						|
 * whenever multicast addresses must be enabled/disabled. This also gets
 | 
						|
 * called to set/reset promiscuous mode. Depending on the deivce flag, we
 | 
						|
 * determine, if multicast address must be enabled or if promiscuous mode
 | 
						|
 * is to be disabled etc.
 | 
						|
 */
 | 
						|
static void vxge_set_multicast(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct dev_mc_list *mclist;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	int i, mcast_cnt = 0;
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct macInfo mac_info;
 | 
						|
	int vpath_idx = 0;
 | 
						|
	struct vxge_mac_addrs *mac_entry;
 | 
						|
	struct list_head *list_head;
 | 
						|
	struct list_head *entry, *next;
 | 
						|
	u8 *mac_address = NULL;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	hldev = (struct __vxge_hw_device  *)vdev->devh;
 | 
						|
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev)))
 | 
						|
		return;
 | 
						|
 | 
						|
	if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
			vxge_assert(vdev->vpaths[i].is_open);
 | 
						|
			status = vxge_hw_vpath_mcast_enable(
 | 
						|
						vdev->vpaths[i].handle);
 | 
						|
			vdev->all_multi_flg = 1;
 | 
						|
		}
 | 
						|
	} else if ((dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
			vxge_assert(vdev->vpaths[i].is_open);
 | 
						|
			status = vxge_hw_vpath_mcast_disable(
 | 
						|
						vdev->vpaths[i].handle);
 | 
						|
			vdev->all_multi_flg = 1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (status != VXGE_HW_OK)
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"failed to %s multicast, status %d",
 | 
						|
			dev->flags & IFF_ALLMULTI ?
 | 
						|
			"enable" : "disable", status);
 | 
						|
 | 
						|
	if (!vdev->config.addr_learn_en) {
 | 
						|
		if (dev->flags & IFF_PROMISC) {
 | 
						|
			for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
				vxge_assert(vdev->vpaths[i].is_open);
 | 
						|
				status = vxge_hw_vpath_promisc_enable(
 | 
						|
						vdev->vpaths[i].handle);
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
				vxge_assert(vdev->vpaths[i].is_open);
 | 
						|
				status = vxge_hw_vpath_promisc_disable(
 | 
						|
						vdev->vpaths[i].handle);
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	memset(&mac_info, 0, sizeof(struct macInfo));
 | 
						|
	/* Update individual M_CAST address list */
 | 
						|
	if ((!vdev->all_multi_flg) && dev->mc_count) {
 | 
						|
 | 
						|
		mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
 | 
						|
		list_head = &vdev->vpaths[0].mac_addr_list;
 | 
						|
		if ((dev->mc_count +
 | 
						|
			(vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) >
 | 
						|
				vdev->vpaths[0].max_mac_addr_cnt)
 | 
						|
			goto _set_all_mcast;
 | 
						|
 | 
						|
		/* Delete previous MC's */
 | 
						|
		for (i = 0; i < mcast_cnt; i++) {
 | 
						|
			if (!list_empty(list_head))
 | 
						|
				mac_entry = (struct vxge_mac_addrs *)
 | 
						|
					list_first_entry(list_head,
 | 
						|
						struct vxge_mac_addrs,
 | 
						|
						item);
 | 
						|
 | 
						|
			list_for_each_safe(entry, next, list_head) {
 | 
						|
 | 
						|
				mac_entry = (struct vxge_mac_addrs *) entry;
 | 
						|
				/* Copy the mac address to delete */
 | 
						|
				mac_address = (u8 *)&mac_entry->macaddr;
 | 
						|
				memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
 | 
						|
 | 
						|
				/* Is this a multicast address */
 | 
						|
				if (0x01 & mac_info.macaddr[0]) {
 | 
						|
					for (vpath_idx = 0; vpath_idx <
 | 
						|
						vdev->no_of_vpath;
 | 
						|
						vpath_idx++) {
 | 
						|
						mac_info.vpath_no = vpath_idx;
 | 
						|
						status = vxge_del_mac_addr(
 | 
						|
								vdev,
 | 
						|
								&mac_info);
 | 
						|
					}
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		/* Add new ones */
 | 
						|
		for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
 | 
						|
			i++, mclist = mclist->next) {
 | 
						|
 | 
						|
			memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN);
 | 
						|
			for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
 | 
						|
					vpath_idx++) {
 | 
						|
				mac_info.vpath_no = vpath_idx;
 | 
						|
				mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
 | 
						|
				status = vxge_add_mac_addr(vdev, &mac_info);
 | 
						|
				if (status != VXGE_HW_OK) {
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
						"%s:%d Setting individual"
 | 
						|
						"multicast address failed",
 | 
						|
						__func__, __LINE__);
 | 
						|
					goto _set_all_mcast;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		return;
 | 
						|
_set_all_mcast:
 | 
						|
		mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
 | 
						|
		/* Delete previous MC's */
 | 
						|
		for (i = 0; i < mcast_cnt; i++) {
 | 
						|
 | 
						|
			list_for_each_safe(entry, next, list_head) {
 | 
						|
 | 
						|
				mac_entry = (struct vxge_mac_addrs *) entry;
 | 
						|
				/* Copy the mac address to delete */
 | 
						|
				mac_address = (u8 *)&mac_entry->macaddr;
 | 
						|
				memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
 | 
						|
 | 
						|
				/* Is this a multicast address */
 | 
						|
				if (0x01 & mac_info.macaddr[0])
 | 
						|
					break;
 | 
						|
			}
 | 
						|
 | 
						|
			for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
 | 
						|
					vpath_idx++) {
 | 
						|
				mac_info.vpath_no = vpath_idx;
 | 
						|
				status = vxge_del_mac_addr(vdev, &mac_info);
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		/* Enable all multicast */
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
			vxge_assert(vdev->vpaths[i].is_open);
 | 
						|
			status = vxge_hw_vpath_mcast_enable(
 | 
						|
						vdev->vpaths[i].handle);
 | 
						|
			if (status != VXGE_HW_OK) {
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"%s:%d Enabling all multicasts failed",
 | 
						|
					 __func__, __LINE__);
 | 
						|
			}
 | 
						|
			vdev->all_multi_flg = 1;
 | 
						|
		}
 | 
						|
		dev->flags |= IFF_ALLMULTI;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_set_mac_addr
 | 
						|
 * @dev: pointer to the device structure
 | 
						|
 *
 | 
						|
 * Update entry "0" (default MAC addr)
 | 
						|
 */
 | 
						|
static int vxge_set_mac_addr(struct net_device *dev, void *p)
 | 
						|
{
 | 
						|
	struct sockaddr *addr = p;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct macInfo mac_info_new, mac_info_old;
 | 
						|
	int vpath_idx = 0;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	hldev = vdev->devh;
 | 
						|
 | 
						|
	if (!is_valid_ether_addr(addr->sa_data))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	memset(&mac_info_new, 0, sizeof(struct macInfo));
 | 
						|
	memset(&mac_info_old, 0, sizeof(struct macInfo));
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...",
 | 
						|
		__func__, __LINE__);
 | 
						|
 | 
						|
	/* Get the old address */
 | 
						|
	memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len);
 | 
						|
 | 
						|
	/* Copy the new address */
 | 
						|
	memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len);
 | 
						|
 | 
						|
	/* First delete the old mac address from all the vpaths
 | 
						|
	as we can't specify the index while adding new mac address */
 | 
						|
	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
 | 
						|
		struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx];
 | 
						|
		if (!vpath->is_open) {
 | 
						|
			/* This can happen when this interface is added/removed
 | 
						|
			to the bonding interface. Delete this station address
 | 
						|
			from the linked list */
 | 
						|
			vxge_mac_list_del(vpath, &mac_info_old);
 | 
						|
 | 
						|
			/* Add this new address to the linked list
 | 
						|
			for later restoring */
 | 
						|
			vxge_mac_list_add(vpath, &mac_info_new);
 | 
						|
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		/* Delete the station address */
 | 
						|
		mac_info_old.vpath_no = vpath_idx;
 | 
						|
		status = vxge_del_mac_addr(vdev, &mac_info_old);
 | 
						|
	}
 | 
						|
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev))) {
 | 
						|
		memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 | 
						|
		return VXGE_HW_OK;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Set this mac address to all the vpaths */
 | 
						|
	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
 | 
						|
		mac_info_new.vpath_no = vpath_idx;
 | 
						|
		mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
 | 
						|
		status = vxge_add_mac_addr(vdev, &mac_info_new);
 | 
						|
		if (status != VXGE_HW_OK)
 | 
						|
			return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_vpath_intr_enable
 | 
						|
 * @vdev: pointer to vdev
 | 
						|
 * @vp_id: vpath for which to enable the interrupts
 | 
						|
 *
 | 
						|
 * Enables the interrupts for the vpath
 | 
						|
*/
 | 
						|
void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id)
 | 
						|
{
 | 
						|
	struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
 | 
						|
	int msix_id, alarm_msix_id;
 | 
						|
	int tim_msix_id[4] = {[0 ...3] = 0};
 | 
						|
 | 
						|
	vxge_hw_vpath_intr_enable(vpath->handle);
 | 
						|
 | 
						|
	if (vdev->config.intr_type == INTA)
 | 
						|
		vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle);
 | 
						|
	else {
 | 
						|
		msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE;
 | 
						|
		alarm_msix_id =
 | 
						|
			VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2;
 | 
						|
 | 
						|
		tim_msix_id[0] = msix_id;
 | 
						|
		tim_msix_id[1] = msix_id + 1;
 | 
						|
		vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id,
 | 
						|
			alarm_msix_id);
 | 
						|
 | 
						|
		vxge_hw_vpath_msix_unmask(vpath->handle, msix_id);
 | 
						|
		vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1);
 | 
						|
 | 
						|
		/* enable the alarm vector */
 | 
						|
		vxge_hw_vpath_msix_unmask(vpath->handle, alarm_msix_id);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_vpath_intr_disable
 | 
						|
 * @vdev: pointer to vdev
 | 
						|
 * @vp_id: vpath for which to disable the interrupts
 | 
						|
 *
 | 
						|
 * Disables the interrupts for the vpath
 | 
						|
*/
 | 
						|
void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id)
 | 
						|
{
 | 
						|
	struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
 | 
						|
	int msix_id;
 | 
						|
 | 
						|
	vxge_hw_vpath_intr_disable(vpath->handle);
 | 
						|
 | 
						|
	if (vdev->config.intr_type == INTA)
 | 
						|
		vxge_hw_vpath_inta_mask_tx_rx(vpath->handle);
 | 
						|
	else {
 | 
						|
		msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE;
 | 
						|
		vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
 | 
						|
		vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1);
 | 
						|
 | 
						|
		/* disable the alarm vector */
 | 
						|
		msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2;
 | 
						|
		vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_reset_vpath
 | 
						|
 * @vdev: pointer to vdev
 | 
						|
 * @vp_id: vpath to reset
 | 
						|
 *
 | 
						|
 * Resets the vpath
 | 
						|
*/
 | 
						|
static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	/* check if device is down already */
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev)))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/* is device reset already scheduled */
 | 
						|
	if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (vdev->vpaths[vp_id].handle) {
 | 
						|
		if (vxge_hw_vpath_reset(vdev->vpaths[vp_id].handle)
 | 
						|
				== VXGE_HW_OK) {
 | 
						|
			if (is_vxge_card_up(vdev) &&
 | 
						|
				vxge_hw_vpath_recover_from_reset(
 | 
						|
					vdev->vpaths[vp_id].handle)
 | 
						|
					!= VXGE_HW_OK) {
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"vxge_hw_vpath_recover_from_reset"
 | 
						|
					"failed for vpath:%d", vp_id);
 | 
						|
				return status;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"vxge_hw_vpath_reset failed for"
 | 
						|
				"vpath:%d", vp_id);
 | 
						|
				return status;
 | 
						|
		}
 | 
						|
	} else
 | 
						|
		return VXGE_HW_FAIL;
 | 
						|
 | 
						|
	vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]);
 | 
						|
	vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]);
 | 
						|
 | 
						|
	/* Enable all broadcast */
 | 
						|
	vxge_hw_vpath_bcast_enable(vdev->vpaths[vp_id].handle);
 | 
						|
 | 
						|
	/* Enable the interrupts */
 | 
						|
	vxge_vpath_intr_enable(vdev, vp_id);
 | 
						|
 | 
						|
	smp_wmb();
 | 
						|
 | 
						|
	/* Enable the flow of traffic through the vpath */
 | 
						|
	vxge_hw_vpath_enable(vdev->vpaths[vp_id].handle);
 | 
						|
 | 
						|
	smp_wmb();
 | 
						|
	vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[vp_id].handle);
 | 
						|
	vdev->vpaths[vp_id].ring.last_status = VXGE_HW_OK;
 | 
						|
 | 
						|
	/* Vpath reset done */
 | 
						|
	clear_bit(vp_id, &vdev->vp_reset);
 | 
						|
 | 
						|
	/* Start the vpath queue */
 | 
						|
	vxge_wake_tx_queue(&vdev->vpaths[vp_id].fifo, NULL);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int do_vxge_reset(struct vxgedev *vdev, int event)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	int ret = 0, vp_id, i;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) {
 | 
						|
		/* check if device is down already */
 | 
						|
		if (unlikely(!is_vxge_card_up(vdev)))
 | 
						|
			return 0;
 | 
						|
 | 
						|
		/* is reset already scheduled */
 | 
						|
		if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
 | 
						|
			return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (event == VXGE_LL_FULL_RESET) {
 | 
						|
		/* wait for all the vpath reset to complete */
 | 
						|
		for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
 | 
						|
			while (test_bit(vp_id, &vdev->vp_reset))
 | 
						|
				msleep(50);
 | 
						|
		}
 | 
						|
 | 
						|
		/* if execution mode is set to debug, don't reset the adapter */
 | 
						|
		if (unlikely(vdev->exec_mode)) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: execution mode is debug, returning..",
 | 
						|
				vdev->ndev->name);
 | 
						|
		clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
		vxge_stop_all_tx_queue(vdev);
 | 
						|
		return 0;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (event == VXGE_LL_FULL_RESET) {
 | 
						|
		vxge_hw_device_intr_disable(vdev->devh);
 | 
						|
 | 
						|
		switch (vdev->cric_err_event) {
 | 
						|
		case VXGE_HW_EVENT_UNKNOWN:
 | 
						|
			vxge_stop_all_tx_queue(vdev);
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"fatal: %s: Disabling device due to"
 | 
						|
				"unknown error",
 | 
						|
				vdev->ndev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		case VXGE_HW_EVENT_RESET_START:
 | 
						|
			break;
 | 
						|
		case VXGE_HW_EVENT_RESET_COMPLETE:
 | 
						|
		case VXGE_HW_EVENT_LINK_DOWN:
 | 
						|
		case VXGE_HW_EVENT_LINK_UP:
 | 
						|
		case VXGE_HW_EVENT_ALARM_CLEARED:
 | 
						|
		case VXGE_HW_EVENT_ECCERR:
 | 
						|
		case VXGE_HW_EVENT_MRPCIM_ECCERR:
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		case VXGE_HW_EVENT_FIFO_ERR:
 | 
						|
		case VXGE_HW_EVENT_VPATH_ERR:
 | 
						|
			break;
 | 
						|
		case VXGE_HW_EVENT_CRITICAL_ERR:
 | 
						|
			vxge_stop_all_tx_queue(vdev);
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"fatal: %s: Disabling device due to"
 | 
						|
				"serious error",
 | 
						|
				vdev->ndev->name);
 | 
						|
			/* SOP or device reset required */
 | 
						|
			/* This event is not currently used */
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		case VXGE_HW_EVENT_SERR:
 | 
						|
			vxge_stop_all_tx_queue(vdev);
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"fatal: %s: Disabling device due to"
 | 
						|
				"serious error",
 | 
						|
				vdev->ndev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		case VXGE_HW_EVENT_SRPCIM_SERR:
 | 
						|
		case VXGE_HW_EVENT_MRPCIM_SERR:
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		case VXGE_HW_EVENT_SLOT_FREEZE:
 | 
						|
			vxge_stop_all_tx_queue(vdev);
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"fatal: %s: Disabling device due to"
 | 
						|
				"slot freeze",
 | 
						|
				vdev->ndev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		default:
 | 
						|
			break;
 | 
						|
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET))
 | 
						|
		vxge_stop_all_tx_queue(vdev);
 | 
						|
 | 
						|
	if (event == VXGE_LL_FULL_RESET) {
 | 
						|
		status = vxge_reset_all_vpaths(vdev);
 | 
						|
		if (status != VXGE_HW_OK) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"fatal: %s: can not reset vpaths",
 | 
						|
				vdev->ndev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (event == VXGE_LL_COMPL_RESET) {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			if (vdev->vpaths[i].handle) {
 | 
						|
				if (vxge_hw_vpath_recover_from_reset(
 | 
						|
					vdev->vpaths[i].handle)
 | 
						|
						!= VXGE_HW_OK) {
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
						"vxge_hw_vpath_recover_"
 | 
						|
						"from_reset failed for vpath: "
 | 
						|
						"%d", i);
 | 
						|
					ret = -EPERM;
 | 
						|
					goto out;
 | 
						|
				}
 | 
						|
				} else {
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
					"vxge_hw_vpath_reset failed for "
 | 
						|
						"vpath:%d", i);
 | 
						|
					ret = -EPERM;
 | 
						|
					goto out;
 | 
						|
				}
 | 
						|
	}
 | 
						|
 | 
						|
	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) {
 | 
						|
		/* Reprogram the DA table with populated mac addresses */
 | 
						|
		for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
 | 
						|
			vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]);
 | 
						|
			vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]);
 | 
						|
		}
 | 
						|
 | 
						|
		/* enable vpath interrupts */
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			vxge_vpath_intr_enable(vdev, i);
 | 
						|
 | 
						|
		vxge_hw_device_intr_enable(vdev->devh);
 | 
						|
 | 
						|
		smp_wmb();
 | 
						|
 | 
						|
		/* Indicate card up */
 | 
						|
		set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
 | 
						|
		/* Get the traffic to flow through the vpaths */
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
			vxge_hw_vpath_enable(vdev->vpaths[i].handle);
 | 
						|
			smp_wmb();
 | 
						|
			vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle);
 | 
						|
		}
 | 
						|
 | 
						|
		vxge_wake_all_tx_queue(vdev);
 | 
						|
	}
 | 
						|
 | 
						|
out:
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
 | 
						|
	/* Indicate reset done */
 | 
						|
	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET))
 | 
						|
		clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_reset
 | 
						|
 * @vdev: pointer to ll device
 | 
						|
 *
 | 
						|
 * driver may reset the chip on events of serr, eccerr, etc
 | 
						|
 */
 | 
						|
int vxge_reset(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_poll - Receive handler when Receive Polling is used.
 | 
						|
 * @dev: pointer to the device structure.
 | 
						|
 * @budget: Number of packets budgeted to be processed in this iteration.
 | 
						|
 *
 | 
						|
 * This function comes into picture only if Receive side is being handled
 | 
						|
 * through polling (called NAPI in linux). It mostly does what the normal
 | 
						|
 * Rx interrupt handler does in terms of descriptor and packet processing
 | 
						|
 * but not in an interrupt context. Also it will process a specified number
 | 
						|
 * of packets at most in one iteration. This value is passed down by the
 | 
						|
 * kernel as the function argument 'budget'.
 | 
						|
 */
 | 
						|
static int vxge_poll_msix(struct napi_struct *napi, int budget)
 | 
						|
{
 | 
						|
	struct vxge_ring *ring =
 | 
						|
		container_of(napi, struct vxge_ring, napi);
 | 
						|
	int budget_org = budget;
 | 
						|
	ring->budget = budget;
 | 
						|
 | 
						|
	vxge_hw_vpath_poll_rx(ring->handle);
 | 
						|
 | 
						|
	if (ring->pkts_processed < budget_org) {
 | 
						|
		napi_complete(napi);
 | 
						|
		/* Re enable the Rx interrupts for the vpath */
 | 
						|
		vxge_hw_channel_msix_unmask(
 | 
						|
				(struct __vxge_hw_channel *)ring->handle,
 | 
						|
				ring->rx_vector_no);
 | 
						|
	}
 | 
						|
 | 
						|
	return ring->pkts_processed;
 | 
						|
}
 | 
						|
 | 
						|
static int vxge_poll_inta(struct napi_struct *napi, int budget)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev = container_of(napi, struct vxgedev, napi);
 | 
						|
	int pkts_processed = 0;
 | 
						|
	int i;
 | 
						|
	int budget_org = budget;
 | 
						|
	struct vxge_ring *ring;
 | 
						|
 | 
						|
	struct __vxge_hw_device  *hldev = (struct __vxge_hw_device *)
 | 
						|
		pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		ring = &vdev->vpaths[i].ring;
 | 
						|
		ring->budget = budget;
 | 
						|
		vxge_hw_vpath_poll_rx(ring->handle);
 | 
						|
		pkts_processed += ring->pkts_processed;
 | 
						|
		budget -= ring->pkts_processed;
 | 
						|
		if (budget <= 0)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	VXGE_COMPLETE_ALL_TX(vdev);
 | 
						|
 | 
						|
	if (pkts_processed < budget_org) {
 | 
						|
		napi_complete(napi);
 | 
						|
		/* Re enable the Rx interrupts for the ring */
 | 
						|
		vxge_hw_device_unmask_all(hldev);
 | 
						|
		vxge_hw_device_flush_io(hldev);
 | 
						|
	}
 | 
						|
 | 
						|
	return pkts_processed;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_NET_POLL_CONTROLLER
 | 
						|
/**
 | 
						|
 * vxge_netpoll - netpoll event handler entry point
 | 
						|
 * @dev : pointer to the device structure.
 | 
						|
 * Description:
 | 
						|
 *      This function will be called by upper layer to check for events on the
 | 
						|
 * interface in situations where interrupts are disabled. It is used for
 | 
						|
 * specific in-kernel networking tasks, such as remote consoles and kernel
 | 
						|
 * debugging over the network (example netdump in RedHat).
 | 
						|
 */
 | 
						|
static void vxge_netpoll(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	if (pci_channel_offline(vdev->pdev))
 | 
						|
		return;
 | 
						|
 | 
						|
	disable_irq(dev->irq);
 | 
						|
	vxge_hw_device_clear_tx_rx(hldev);
 | 
						|
 | 
						|
	vxge_hw_device_clear_tx_rx(hldev);
 | 
						|
	VXGE_COMPLETE_ALL_RX(vdev);
 | 
						|
	VXGE_COMPLETE_ALL_TX(vdev);
 | 
						|
 | 
						|
	enable_irq(dev->irq);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
	return;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
/* RTH configuration */
 | 
						|
static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxge_hw_rth_hash_types hash_types;
 | 
						|
	u8 itable[256] = {0}; /* indirection table */
 | 
						|
	u8 mtable[256] = {0}; /* CPU to vpath mapping  */
 | 
						|
	int index;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Filling
 | 
						|
	 * 	- itable with bucket numbers
 | 
						|
	 * 	- mtable with bucket-to-vpath mapping
 | 
						|
	 */
 | 
						|
	for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) {
 | 
						|
		itable[index] = index;
 | 
						|
		mtable[index] = index % vdev->no_of_vpath;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Fill RTH hash types */
 | 
						|
	hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4;
 | 
						|
	hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4;
 | 
						|
	hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6;
 | 
						|
	hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6;
 | 
						|
	hash_types.hash_type_tcpipv6ex_en =
 | 
						|
					vdev->config.rth_hash_type_tcpipv6ex;
 | 
						|
	hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex;
 | 
						|
 | 
						|
	/* set indirection table, bucket-to-vpath mapping */
 | 
						|
	status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles,
 | 
						|
						vdev->no_of_vpath,
 | 
						|
						mtable, itable,
 | 
						|
						vdev->config.rth_bkt_sz);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"RTH indirection table configuration failed "
 | 
						|
			"for vpath:%d", vdev->vpaths[0].device_id);
 | 
						|
		return status;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	* Because the itable_set() method uses the active_table field
 | 
						|
	* for the target virtual path the RTH config should be updated
 | 
						|
	* for all VPATHs. The h/w only uses the lowest numbered VPATH
 | 
						|
	* when steering frames.
 | 
						|
	*/
 | 
						|
	 for (index = 0; index < vdev->no_of_vpath; index++) {
 | 
						|
		status = vxge_hw_vpath_rts_rth_set(
 | 
						|
				vdev->vpaths[index].handle,
 | 
						|
				vdev->config.rth_algorithm,
 | 
						|
				&hash_types,
 | 
						|
				vdev->config.rth_bkt_sz);
 | 
						|
 | 
						|
		 if (status != VXGE_HW_OK) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"RTH configuration failed for vpath:%d",
 | 
						|
				vdev->vpaths[index].device_id);
 | 
						|
			return status;
 | 
						|
		 }
 | 
						|
	 }
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac)
 | 
						|
{
 | 
						|
	struct vxge_mac_addrs *new_mac_entry;
 | 
						|
	u8 *mac_address = NULL;
 | 
						|
 | 
						|
	if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT)
 | 
						|
		return TRUE;
 | 
						|
 | 
						|
	new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC);
 | 
						|
	if (!new_mac_entry) {
 | 
						|
		vxge_debug_mem(VXGE_ERR,
 | 
						|
			"%s: memory allocation failed",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		return FALSE;
 | 
						|
	}
 | 
						|
 | 
						|
	list_add(&new_mac_entry->item, &vpath->mac_addr_list);
 | 
						|
 | 
						|
	/* Copy the new mac address to the list */
 | 
						|
	mac_address = (u8 *)&new_mac_entry->macaddr;
 | 
						|
	memcpy(mac_address, mac->macaddr, ETH_ALEN);
 | 
						|
 | 
						|
	new_mac_entry->state = mac->state;
 | 
						|
	vpath->mac_addr_cnt++;
 | 
						|
 | 
						|
	/* Is this a multicast address */
 | 
						|
	if (0x01 & mac->macaddr[0])
 | 
						|
		vpath->mcast_addr_cnt++;
 | 
						|
 | 
						|
	return TRUE;
 | 
						|
}
 | 
						|
 | 
						|
/* Add a mac address to DA table */
 | 
						|
enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxge_vpath *vpath;
 | 
						|
	enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode;
 | 
						|
 | 
						|
	if (0x01 & mac->macaddr[0]) /* multicast address */
 | 
						|
		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE;
 | 
						|
	else
 | 
						|
		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE;
 | 
						|
 | 
						|
	vpath = &vdev->vpaths[mac->vpath_no];
 | 
						|
	status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr,
 | 
						|
						mac->macmask, duplicate_mode);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"DA config add entry failed for vpath:%d",
 | 
						|
			vpath->device_id);
 | 
						|
	} else
 | 
						|
		if (FALSE == vxge_mac_list_add(vpath, mac))
 | 
						|
			status = -EPERM;
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac)
 | 
						|
{
 | 
						|
	struct list_head *entry, *next;
 | 
						|
	u64 del_mac = 0;
 | 
						|
	u8 *mac_address = (u8 *) (&del_mac);
 | 
						|
 | 
						|
	/* Copy the mac address to delete from the list */
 | 
						|
	memcpy(mac_address, mac->macaddr, ETH_ALEN);
 | 
						|
 | 
						|
	list_for_each_safe(entry, next, &vpath->mac_addr_list) {
 | 
						|
		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) {
 | 
						|
			list_del(entry);
 | 
						|
			kfree((struct vxge_mac_addrs *)entry);
 | 
						|
			vpath->mac_addr_cnt--;
 | 
						|
 | 
						|
			/* Is this a multicast address */
 | 
						|
			if (0x01 & mac->macaddr[0])
 | 
						|
				vpath->mcast_addr_cnt--;
 | 
						|
			return TRUE;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return FALSE;
 | 
						|
}
 | 
						|
/* delete a mac address from DA table */
 | 
						|
enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxge_vpath *vpath;
 | 
						|
 | 
						|
	vpath = &vdev->vpaths[mac->vpath_no];
 | 
						|
	status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr,
 | 
						|
						mac->macmask);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"DA config delete entry failed for vpath:%d",
 | 
						|
			vpath->device_id);
 | 
						|
	} else
 | 
						|
		vxge_mac_list_del(vpath, mac);
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/* list all mac addresses from DA table */
 | 
						|
enum vxge_hw_status
 | 
						|
static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath,
 | 
						|
					struct macInfo *mac)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	unsigned char macmask[ETH_ALEN];
 | 
						|
	unsigned char macaddr[ETH_ALEN];
 | 
						|
 | 
						|
	status = vxge_hw_vpath_mac_addr_get(vpath->handle,
 | 
						|
				macaddr, macmask);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"DA config list entry failed for vpath:%d",
 | 
						|
			vpath->device_id);
 | 
						|
		return status;
 | 
						|
	}
 | 
						|
 | 
						|
	while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) {
 | 
						|
 | 
						|
		status = vxge_hw_vpath_mac_addr_get_next(vpath->handle,
 | 
						|
				macaddr, macmask);
 | 
						|
		if (status != VXGE_HW_OK)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/* Store all vlan ids from the list to the vid table */
 | 
						|
enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxgedev *vdev = vpath->vdev;
 | 
						|
	u16 vid;
 | 
						|
 | 
						|
	if (vdev->vlgrp && vpath->is_open) {
 | 
						|
 | 
						|
		for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
 | 
						|
			if (!vlan_group_get_device(vdev->vlgrp, vid))
 | 
						|
				continue;
 | 
						|
			/* Add these vlan to the vid table */
 | 
						|
			status = vxge_hw_vpath_vid_add(vpath->handle, vid);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/* Store all mac addresses from the list to the DA table */
 | 
						|
enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct macInfo mac_info;
 | 
						|
	u8 *mac_address = NULL;
 | 
						|
	struct list_head *entry, *next;
 | 
						|
 | 
						|
	memset(&mac_info, 0, sizeof(struct macInfo));
 | 
						|
 | 
						|
	if (vpath->is_open) {
 | 
						|
 | 
						|
		list_for_each_safe(entry, next, &vpath->mac_addr_list) {
 | 
						|
			mac_address =
 | 
						|
				(u8 *)&
 | 
						|
				((struct vxge_mac_addrs *)entry)->macaddr;
 | 
						|
			memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
 | 
						|
			((struct vxge_mac_addrs *)entry)->state =
 | 
						|
				VXGE_LL_MAC_ADDR_IN_DA_TABLE;
 | 
						|
			/* does this mac address already exist in da table? */
 | 
						|
			status = vxge_search_mac_addr_in_da_table(vpath,
 | 
						|
				&mac_info);
 | 
						|
			if (status != VXGE_HW_OK) {
 | 
						|
				/* Add this mac address to the DA table */
 | 
						|
				status = vxge_hw_vpath_mac_addr_add(
 | 
						|
					vpath->handle, mac_info.macaddr,
 | 
						|
					mac_info.macmask,
 | 
						|
				    VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE);
 | 
						|
				if (status != VXGE_HW_OK) {
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
					    "DA add entry failed for vpath:%d",
 | 
						|
					    vpath->device_id);
 | 
						|
					((struct vxge_mac_addrs *)entry)->state
 | 
						|
						= VXGE_LL_MAC_ADDR_IN_LIST;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/* reset vpaths */
 | 
						|
enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
		if (vdev->vpaths[i].handle) {
 | 
						|
			if (vxge_hw_vpath_reset(vdev->vpaths[i].handle)
 | 
						|
					== VXGE_HW_OK) {
 | 
						|
				if (is_vxge_card_up(vdev) &&
 | 
						|
					vxge_hw_vpath_recover_from_reset(
 | 
						|
						vdev->vpaths[i].handle)
 | 
						|
						!= VXGE_HW_OK) {
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
						"vxge_hw_vpath_recover_"
 | 
						|
						"from_reset failed for vpath: "
 | 
						|
						"%d", i);
 | 
						|
					return status;
 | 
						|
				}
 | 
						|
			} else {
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"vxge_hw_vpath_reset failed for "
 | 
						|
					"vpath:%d", i);
 | 
						|
					return status;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/* close vpaths */
 | 
						|
void vxge_close_vpaths(struct vxgedev *vdev, int index)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	for (i = index; i < vdev->no_of_vpath; i++) {
 | 
						|
		if (vdev->vpaths[i].handle && vdev->vpaths[i].is_open) {
 | 
						|
			vxge_hw_vpath_close(vdev->vpaths[i].handle);
 | 
						|
			vdev->stats.vpaths_open--;
 | 
						|
		}
 | 
						|
		vdev->vpaths[i].is_open = 0;
 | 
						|
		vdev->vpaths[i].handle  = NULL;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/* open vpaths */
 | 
						|
int vxge_open_vpaths(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	int i;
 | 
						|
	u32 vp_id = 0;
 | 
						|
	struct vxge_hw_vpath_attr attr;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		vxge_assert(vdev->vpaths[i].is_configured);
 | 
						|
		attr.vp_id = vdev->vpaths[i].device_id;
 | 
						|
		attr.fifo_attr.callback = vxge_xmit_compl;
 | 
						|
		attr.fifo_attr.txdl_term = vxge_tx_term;
 | 
						|
		attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv);
 | 
						|
		attr.fifo_attr.userdata = (void *)&vdev->vpaths[i].fifo;
 | 
						|
 | 
						|
		attr.ring_attr.callback = vxge_rx_1b_compl;
 | 
						|
		attr.ring_attr.rxd_init = vxge_rx_initial_replenish;
 | 
						|
		attr.ring_attr.rxd_term = vxge_rx_term;
 | 
						|
		attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv);
 | 
						|
		attr.ring_attr.userdata = (void *)&vdev->vpaths[i].ring;
 | 
						|
 | 
						|
		vdev->vpaths[i].ring.ndev = vdev->ndev;
 | 
						|
		vdev->vpaths[i].ring.pdev = vdev->pdev;
 | 
						|
		status = vxge_hw_vpath_open(vdev->devh, &attr,
 | 
						|
				&(vdev->vpaths[i].handle));
 | 
						|
		if (status == VXGE_HW_OK) {
 | 
						|
			vdev->vpaths[i].fifo.handle =
 | 
						|
			    (struct __vxge_hw_fifo *)attr.fifo_attr.userdata;
 | 
						|
			vdev->vpaths[i].ring.handle =
 | 
						|
			    (struct __vxge_hw_ring *)attr.ring_attr.userdata;
 | 
						|
			vdev->vpaths[i].fifo.tx_steering_type =
 | 
						|
				vdev->config.tx_steering_type;
 | 
						|
			vdev->vpaths[i].fifo.ndev = vdev->ndev;
 | 
						|
			vdev->vpaths[i].fifo.pdev = vdev->pdev;
 | 
						|
			vdev->vpaths[i].fifo.indicate_max_pkts =
 | 
						|
				vdev->config.fifo_indicate_max_pkts;
 | 
						|
			vdev->vpaths[i].ring.rx_vector_no = 0;
 | 
						|
			vdev->vpaths[i].ring.rx_csum = vdev->rx_csum;
 | 
						|
			vdev->vpaths[i].is_open = 1;
 | 
						|
			vdev->vp_handles[i] = vdev->vpaths[i].handle;
 | 
						|
			vdev->vpaths[i].ring.gro_enable =
 | 
						|
						vdev->config.gro_enable;
 | 
						|
			vdev->vpaths[i].ring.vlan_tag_strip =
 | 
						|
						vdev->vlan_tag_strip;
 | 
						|
			vdev->stats.vpaths_open++;
 | 
						|
		} else {
 | 
						|
			vdev->stats.vpath_open_fail++;
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: vpath: %d failed to open "
 | 
						|
				"with status: %d",
 | 
						|
			    vdev->ndev->name, vdev->vpaths[i].device_id,
 | 
						|
				status);
 | 
						|
			vxge_close_vpaths(vdev, 0);
 | 
						|
			return -EPERM;
 | 
						|
		}
 | 
						|
 | 
						|
		vp_id =
 | 
						|
		  ((struct __vxge_hw_vpath_handle *)vdev->vpaths[i].handle)->
 | 
						|
		  vpath->vp_id;
 | 
						|
		vdev->vpaths_deployed |= vxge_mBIT(vp_id);
 | 
						|
	}
 | 
						|
	return VXGE_HW_OK;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 *  vxge_isr_napi
 | 
						|
 *  @irq: the irq of the device.
 | 
						|
 *  @dev_id: a void pointer to the hldev structure of the Titan device
 | 
						|
 *  @ptregs: pointer to the registers pushed on the stack.
 | 
						|
 *
 | 
						|
 *  This function is the ISR handler of the device when napi is enabled. It
 | 
						|
 *  identifies the reason for the interrupt and calls the relevant service
 | 
						|
 *  routines.
 | 
						|
 */
 | 
						|
static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct net_device *dev;
 | 
						|
	struct __vxge_hw_device *hldev;
 | 
						|
	u64 reason;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *) dev_id;;
 | 
						|
 | 
						|
	vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	dev = vdev->ndev;
 | 
						|
	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
	if (pci_channel_offline(vdev->pdev))
 | 
						|
		return IRQ_NONE;
 | 
						|
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev)))
 | 
						|
		return IRQ_NONE;
 | 
						|
 | 
						|
	status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode,
 | 
						|
			&reason);
 | 
						|
	if (status == VXGE_HW_OK) {
 | 
						|
		vxge_hw_device_mask_all(hldev);
 | 
						|
 | 
						|
		if (reason &
 | 
						|
			VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT(
 | 
						|
			vdev->vpaths_deployed >>
 | 
						|
			(64 - VXGE_HW_MAX_VIRTUAL_PATHS))) {
 | 
						|
 | 
						|
			vxge_hw_device_clear_tx_rx(hldev);
 | 
						|
			napi_schedule(&vdev->napi);
 | 
						|
			vxge_debug_intr(VXGE_TRACE,
 | 
						|
				"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
			return IRQ_HANDLED;
 | 
						|
		} else
 | 
						|
			vxge_hw_device_unmask_all(hldev);
 | 
						|
	} else if (unlikely((status == VXGE_HW_ERR_VPATH) ||
 | 
						|
		(status == VXGE_HW_ERR_CRITICAL) ||
 | 
						|
		(status == VXGE_HW_ERR_FIFO))) {
 | 
						|
		vxge_hw_device_mask_all(hldev);
 | 
						|
		vxge_hw_device_flush_io(hldev);
 | 
						|
		return IRQ_HANDLED;
 | 
						|
	} else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
	return IRQ_NONE;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PCI_MSI
 | 
						|
 | 
						|
static irqreturn_t
 | 
						|
vxge_tx_msix_handle(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id;
 | 
						|
 | 
						|
	VXGE_COMPLETE_VPATH_TX(fifo);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t
 | 
						|
vxge_rx_msix_napi_handle(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct vxge_ring *ring = (struct vxge_ring *)dev_id;
 | 
						|
 | 
						|
	/* MSIX_IDX for Rx is 1 */
 | 
						|
	vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle,
 | 
						|
					ring->rx_vector_no);
 | 
						|
 | 
						|
	napi_schedule(&ring->napi);
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t
 | 
						|
vxge_alarm_msix_handle(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id;
 | 
						|
	struct vxgedev *vdev = vpath->vdev;
 | 
						|
	int alarm_msix_id =
 | 
						|
		VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle,
 | 
						|
			alarm_msix_id);
 | 
						|
 | 
						|
		status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle,
 | 
						|
			vdev->exec_mode);
 | 
						|
		if (status == VXGE_HW_OK) {
 | 
						|
 | 
						|
			vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle,
 | 
						|
				alarm_msix_id);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		vxge_debug_intr(VXGE_ERR,
 | 
						|
			"%s: vxge_hw_vpath_alarm_process failed %x ",
 | 
						|
			VXGE_DRIVER_NAME, status);
 | 
						|
	}
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static int vxge_alloc_msix(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int j, i, ret = 0;
 | 
						|
	int intr_cnt = 0;
 | 
						|
	int alarm_msix_id = 0, msix_intr_vect = 0;
 | 
						|
	vdev->intr_cnt = 0;
 | 
						|
 | 
						|
	/* Tx/Rx MSIX Vectors count */
 | 
						|
	vdev->intr_cnt = vdev->no_of_vpath * 2;
 | 
						|
 | 
						|
	/* Alarm MSIX Vectors count */
 | 
						|
	vdev->intr_cnt++;
 | 
						|
 | 
						|
	intr_cnt = (vdev->max_vpath_supported * 2) + 1;
 | 
						|
	vdev->entries = kzalloc(intr_cnt * sizeof(struct msix_entry),
 | 
						|
						GFP_KERNEL);
 | 
						|
	if (!vdev->entries) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: memory allocation failed",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		return  -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	vdev->vxge_entries = kzalloc(intr_cnt * sizeof(struct vxge_msix_entry),
 | 
						|
							GFP_KERNEL);
 | 
						|
	if (!vdev->vxge_entries) {
 | 
						|
		vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		kfree(vdev->entries);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Last vector in the list is used for alarm */
 | 
						|
	alarm_msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2;
 | 
						|
	for (i = 0, j = 0; i < vdev->max_vpath_supported; i++) {
 | 
						|
 | 
						|
		msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE;
 | 
						|
 | 
						|
		/* Initialize the fifo vector */
 | 
						|
		vdev->entries[j].entry = msix_intr_vect;
 | 
						|
		vdev->vxge_entries[j].entry = msix_intr_vect;
 | 
						|
		vdev->vxge_entries[j].in_use = 0;
 | 
						|
		j++;
 | 
						|
 | 
						|
		/* Initialize the ring vector */
 | 
						|
		vdev->entries[j].entry = msix_intr_vect + 1;
 | 
						|
		vdev->vxge_entries[j].entry = msix_intr_vect + 1;
 | 
						|
		vdev->vxge_entries[j].in_use = 0;
 | 
						|
		j++;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Initialize the alarm vector */
 | 
						|
	vdev->entries[j].entry = alarm_msix_id;
 | 
						|
	vdev->vxge_entries[j].entry = alarm_msix_id;
 | 
						|
	vdev->vxge_entries[j].in_use = 0;
 | 
						|
 | 
						|
	ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt);
 | 
						|
	/* if driver request exceeeds available irq's, request with a small
 | 
						|
	 * number.
 | 
						|
	*/
 | 
						|
	if (ret > 0) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: MSI-X enable failed for %d vectors, available: %d",
 | 
						|
			VXGE_DRIVER_NAME, intr_cnt, ret);
 | 
						|
		vdev->max_vpath_supported = vdev->no_of_vpath;
 | 
						|
		intr_cnt = (vdev->max_vpath_supported * 2) + 1;
 | 
						|
 | 
						|
		/* Reset the alarm vector setting */
 | 
						|
		vdev->entries[j].entry = 0;
 | 
						|
		vdev->vxge_entries[j].entry = 0;
 | 
						|
 | 
						|
		/* Initialize the alarm vector with new setting */
 | 
						|
		vdev->entries[intr_cnt - 1].entry = alarm_msix_id;
 | 
						|
		vdev->vxge_entries[intr_cnt - 1].entry = alarm_msix_id;
 | 
						|
		vdev->vxge_entries[intr_cnt - 1].in_use = 0;
 | 
						|
 | 
						|
		ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt);
 | 
						|
		if (!ret)
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: MSI-X enabled for %d vectors",
 | 
						|
				VXGE_DRIVER_NAME, intr_cnt);
 | 
						|
	}
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: MSI-X enable failed for %d vectors, ret: %d",
 | 
						|
			VXGE_DRIVER_NAME, intr_cnt, ret);
 | 
						|
		kfree(vdev->entries);
 | 
						|
		kfree(vdev->vxge_entries);
 | 
						|
		vdev->entries = NULL;
 | 
						|
		vdev->vxge_entries = NULL;
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int vxge_enable_msix(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
 | 
						|
	int i, ret = 0;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	/* 0 - Tx, 1 - Rx  */
 | 
						|
	int tim_msix_id[4];
 | 
						|
	int alarm_msix_id = 0, msix_intr_vect = 0;
 | 
						|
	vdev->intr_cnt = 0;
 | 
						|
 | 
						|
	/* allocate msix vectors */
 | 
						|
	ret = vxge_alloc_msix(vdev);
 | 
						|
	if (!ret) {
 | 
						|
		/* Last vector in the list is used for alarm */
 | 
						|
		alarm_msix_id =
 | 
						|
			VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2;
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
 | 
						|
			/* If fifo or ring are not enabled
 | 
						|
			   the MSIX vector for that should be set to 0
 | 
						|
			   Hence initializeing this array to all 0s.
 | 
						|
			*/
 | 
						|
			memset(tim_msix_id, 0, sizeof(tim_msix_id));
 | 
						|
			msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE;
 | 
						|
			tim_msix_id[0] = msix_intr_vect;
 | 
						|
 | 
						|
			tim_msix_id[1] = msix_intr_vect + 1;
 | 
						|
			vdev->vpaths[i].ring.rx_vector_no = tim_msix_id[1];
 | 
						|
 | 
						|
			status = vxge_hw_vpath_msix_set(
 | 
						|
						vdev->vpaths[i].handle,
 | 
						|
						tim_msix_id, alarm_msix_id);
 | 
						|
			if (status != VXGE_HW_OK) {
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"vxge_hw_vpath_msix_set "
 | 
						|
					"failed with status : %x", status);
 | 
						|
				kfree(vdev->entries);
 | 
						|
				kfree(vdev->vxge_entries);
 | 
						|
				pci_disable_msix(vdev->pdev);
 | 
						|
				return -ENODEV;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void vxge_rem_msix_isr(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int intr_cnt;
 | 
						|
 | 
						|
	for (intr_cnt = 0; intr_cnt < (vdev->max_vpath_supported * 2 + 1);
 | 
						|
		intr_cnt++) {
 | 
						|
		if (vdev->vxge_entries[intr_cnt].in_use) {
 | 
						|
			synchronize_irq(vdev->entries[intr_cnt].vector);
 | 
						|
			free_irq(vdev->entries[intr_cnt].vector,
 | 
						|
				vdev->vxge_entries[intr_cnt].arg);
 | 
						|
			vdev->vxge_entries[intr_cnt].in_use = 0;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	kfree(vdev->entries);
 | 
						|
	kfree(vdev->vxge_entries);
 | 
						|
	vdev->entries = NULL;
 | 
						|
	vdev->vxge_entries = NULL;
 | 
						|
 | 
						|
	if (vdev->config.intr_type == MSI_X)
 | 
						|
		pci_disable_msix(vdev->pdev);
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static void vxge_rem_isr(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	hldev = (struct __vxge_hw_device  *) pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
#ifdef CONFIG_PCI_MSI
 | 
						|
	if (vdev->config.intr_type == MSI_X) {
 | 
						|
		vxge_rem_msix_isr(vdev);
 | 
						|
	} else
 | 
						|
#endif
 | 
						|
	if (vdev->config.intr_type == INTA) {
 | 
						|
			synchronize_irq(vdev->pdev->irq);
 | 
						|
			free_irq(vdev->pdev->irq, vdev);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int vxge_add_isr(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
#ifdef CONFIG_PCI_MSI
 | 
						|
	int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
 | 
						|
	u64 function_mode = vdev->config.device_hw_info.function_mode;
 | 
						|
	int pci_fun = PCI_FUNC(vdev->pdev->devfn);
 | 
						|
 | 
						|
	if (vdev->config.intr_type == MSI_X)
 | 
						|
		ret = vxge_enable_msix(vdev);
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME);
 | 
						|
		if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
 | 
						|
			test_and_set_bit(__VXGE_STATE_CARD_UP,
 | 
						|
				&driver_config->inta_dev_open))
 | 
						|
			return VXGE_HW_FAIL;
 | 
						|
		else {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: Defaulting to INTA", VXGE_DRIVER_NAME);
 | 
						|
			vdev->config.intr_type = INTA;
 | 
						|
			vxge_hw_device_set_intr_type(vdev->devh,
 | 
						|
				VXGE_HW_INTR_MODE_IRQLINE);
 | 
						|
			vxge_close_vpaths(vdev, 1);
 | 
						|
			vdev->no_of_vpath = 1;
 | 
						|
			vdev->stats.vpaths_open = 1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.intr_type == MSI_X) {
 | 
						|
		for (intr_idx = 0;
 | 
						|
		     intr_idx < (vdev->no_of_vpath *
 | 
						|
			VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) {
 | 
						|
 | 
						|
			msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE;
 | 
						|
			irq_req = 0;
 | 
						|
 | 
						|
			switch (msix_idx) {
 | 
						|
			case 0:
 | 
						|
				snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
 | 
						|
					"%s:vxge fn: %d vpath: %d Tx MSI-X: %d",
 | 
						|
					vdev->ndev->name, pci_fun, vp_idx,
 | 
						|
					vdev->entries[intr_cnt].entry);
 | 
						|
				ret = request_irq(
 | 
						|
				    vdev->entries[intr_cnt].vector,
 | 
						|
					vxge_tx_msix_handle, 0,
 | 
						|
					vdev->desc[intr_cnt],
 | 
						|
					&vdev->vpaths[vp_idx].fifo);
 | 
						|
					vdev->vxge_entries[intr_cnt].arg =
 | 
						|
						&vdev->vpaths[vp_idx].fifo;
 | 
						|
				irq_req = 1;
 | 
						|
				break;
 | 
						|
			case 1:
 | 
						|
				snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
 | 
						|
					"%s:vxge fn: %d vpath: %d Rx MSI-X: %d",
 | 
						|
					vdev->ndev->name, pci_fun, vp_idx,
 | 
						|
					vdev->entries[intr_cnt].entry);
 | 
						|
				ret = request_irq(
 | 
						|
				    vdev->entries[intr_cnt].vector,
 | 
						|
					vxge_rx_msix_napi_handle,
 | 
						|
					0,
 | 
						|
					vdev->desc[intr_cnt],
 | 
						|
					&vdev->vpaths[vp_idx].ring);
 | 
						|
					vdev->vxge_entries[intr_cnt].arg =
 | 
						|
						&vdev->vpaths[vp_idx].ring;
 | 
						|
				irq_req = 1;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
 | 
						|
			if (ret) {
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"%s: MSIX - %d  Registration failed",
 | 
						|
					vdev->ndev->name, intr_cnt);
 | 
						|
				vxge_rem_msix_isr(vdev);
 | 
						|
				if ((function_mode ==
 | 
						|
					VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
 | 
						|
					test_and_set_bit(__VXGE_STATE_CARD_UP,
 | 
						|
						&driver_config->inta_dev_open))
 | 
						|
					return VXGE_HW_FAIL;
 | 
						|
				else {
 | 
						|
					vxge_hw_device_set_intr_type(
 | 
						|
						vdev->devh,
 | 
						|
						VXGE_HW_INTR_MODE_IRQLINE);
 | 
						|
						vdev->config.intr_type = INTA;
 | 
						|
					vxge_debug_init(VXGE_ERR,
 | 
						|
						"%s: Defaulting to INTA"
 | 
						|
						, vdev->ndev->name);
 | 
						|
					vxge_close_vpaths(vdev, 1);
 | 
						|
					vdev->no_of_vpath = 1;
 | 
						|
					vdev->stats.vpaths_open = 1;
 | 
						|
					goto INTA_MODE;
 | 
						|
				}
 | 
						|
			}
 | 
						|
 | 
						|
			if (irq_req) {
 | 
						|
				/* We requested for this msix interrupt */
 | 
						|
				vdev->vxge_entries[intr_cnt].in_use = 1;
 | 
						|
				vxge_hw_vpath_msix_unmask(
 | 
						|
					vdev->vpaths[vp_idx].handle,
 | 
						|
					intr_idx);
 | 
						|
				intr_cnt++;
 | 
						|
			}
 | 
						|
 | 
						|
			/* Point to next vpath handler */
 | 
						|
			if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0)
 | 
						|
				&& (vp_idx < (vdev->no_of_vpath - 1)))
 | 
						|
					vp_idx++;
 | 
						|
		}
 | 
						|
 | 
						|
		intr_cnt = vdev->max_vpath_supported * 2;
 | 
						|
		snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
 | 
						|
			"%s:vxge Alarm fn: %d MSI-X: %d",
 | 
						|
			vdev->ndev->name, pci_fun,
 | 
						|
			vdev->entries[intr_cnt].entry);
 | 
						|
		/* For Alarm interrupts */
 | 
						|
		ret = request_irq(vdev->entries[intr_cnt].vector,
 | 
						|
					vxge_alarm_msix_handle, 0,
 | 
						|
					vdev->desc[intr_cnt],
 | 
						|
					&vdev->vpaths[vp_idx]);
 | 
						|
		if (ret) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: MSIX - %d Registration failed",
 | 
						|
				vdev->ndev->name, intr_cnt);
 | 
						|
			vxge_rem_msix_isr(vdev);
 | 
						|
			if ((function_mode ==
 | 
						|
				VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
 | 
						|
				test_and_set_bit(__VXGE_STATE_CARD_UP,
 | 
						|
						&driver_config->inta_dev_open))
 | 
						|
				return VXGE_HW_FAIL;
 | 
						|
			else {
 | 
						|
				vxge_hw_device_set_intr_type(vdev->devh,
 | 
						|
						VXGE_HW_INTR_MODE_IRQLINE);
 | 
						|
				vdev->config.intr_type = INTA;
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"%s: Defaulting to INTA",
 | 
						|
					vdev->ndev->name);
 | 
						|
				vxge_close_vpaths(vdev, 1);
 | 
						|
				vdev->no_of_vpath = 1;
 | 
						|
				vdev->stats.vpaths_open = 1;
 | 
						|
				goto INTA_MODE;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle,
 | 
						|
					intr_idx - 2);
 | 
						|
		vdev->vxge_entries[intr_cnt].in_use = 1;
 | 
						|
		vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[vp_idx];
 | 
						|
	}
 | 
						|
INTA_MODE:
 | 
						|
#endif
 | 
						|
	snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name);
 | 
						|
 | 
						|
	if (vdev->config.intr_type == INTA) {
 | 
						|
		ret = request_irq((int) vdev->pdev->irq,
 | 
						|
			vxge_isr_napi,
 | 
						|
			IRQF_SHARED, vdev->desc[0], vdev);
 | 
						|
		if (ret) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s %s-%d: ISR registration failed",
 | 
						|
				VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq);
 | 
						|
			return -ENODEV;
 | 
						|
		}
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"new %s-%d line allocated",
 | 
						|
			"IRQ", vdev->pdev->irq);
 | 
						|
	}
 | 
						|
 | 
						|
	return VXGE_HW_OK;
 | 
						|
}
 | 
						|
 | 
						|
static void vxge_poll_vp_reset(unsigned long data)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *)data;
 | 
						|
	int i, j = 0;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		if (test_bit(i, &vdev->vp_reset)) {
 | 
						|
			vxge_reset_vpath(vdev, i);
 | 
						|
			j++;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	if (j && (vdev->config.intr_type != MSI_X)) {
 | 
						|
		vxge_hw_device_unmask_all(vdev->devh);
 | 
						|
		vxge_hw_device_flush_io(vdev->devh);
 | 
						|
	}
 | 
						|
 | 
						|
	mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2);
 | 
						|
}
 | 
						|
 | 
						|
static void vxge_poll_vp_lockup(unsigned long data)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *)data;
 | 
						|
	int i;
 | 
						|
	struct vxge_ring *ring;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		ring = &vdev->vpaths[i].ring;
 | 
						|
		/* Did this vpath received any packets */
 | 
						|
		if (ring->stats.prev_rx_frms == ring->stats.rx_frms) {
 | 
						|
			status = vxge_hw_vpath_check_leak(ring->handle);
 | 
						|
 | 
						|
			/* Did it received any packets last time */
 | 
						|
			if ((VXGE_HW_FAIL == status) &&
 | 
						|
				(VXGE_HW_FAIL == ring->last_status)) {
 | 
						|
 | 
						|
				/* schedule vpath reset */
 | 
						|
				if (!test_and_set_bit(i, &vdev->vp_reset)) {
 | 
						|
 | 
						|
					/* disable interrupts for this vpath */
 | 
						|
					vxge_vpath_intr_disable(vdev, i);
 | 
						|
 | 
						|
					/* stop the queue for this vpath */
 | 
						|
					vxge_stop_tx_queue(&vdev->vpaths[i].
 | 
						|
								fifo);
 | 
						|
					continue;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
		ring->stats.prev_rx_frms = ring->stats.rx_frms;
 | 
						|
		ring->last_status = status;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check every 1 milli second */
 | 
						|
	mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_open
 | 
						|
 * @dev: pointer to the device structure.
 | 
						|
 *
 | 
						|
 * This function is the open entry point of the driver. It mainly calls a
 | 
						|
 * function to allocate Rx buffers and inserts them into the buffer
 | 
						|
 * descriptors and then enables the Rx part of the NIC.
 | 
						|
 * Return value: '0' on success and an appropriate (-)ve integer as
 | 
						|
 * defined in errno.h file on failure.
 | 
						|
 */
 | 
						|
int
 | 
						|
vxge_open(struct net_device *dev)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct __vxge_hw_device *hldev;
 | 
						|
	int ret = 0;
 | 
						|
	int i;
 | 
						|
	u64 val64, function_mode;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d", dev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
 | 
						|
	function_mode = vdev->config.device_hw_info.function_mode;
 | 
						|
 | 
						|
	/* make sure you have link off by default every time Nic is
 | 
						|
	 * initialized */
 | 
						|
	netif_carrier_off(dev);
 | 
						|
 | 
						|
	/* Check for another device already opn with INTA */
 | 
						|
	if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
 | 
						|
		test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) {
 | 
						|
		ret = -EPERM;
 | 
						|
		goto out0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Open VPATHs */
 | 
						|
	status = vxge_open_vpaths(vdev);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: fatal: Vpath open failed", vdev->ndev->name);
 | 
						|
		ret = -EPERM;
 | 
						|
		goto out0;
 | 
						|
	}
 | 
						|
 | 
						|
	vdev->mtu = dev->mtu;
 | 
						|
 | 
						|
	status = vxge_add_isr(vdev);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: fatal: ISR add failed", dev->name);
 | 
						|
		ret = -EPERM;
 | 
						|
		goto out1;
 | 
						|
	}
 | 
						|
 | 
						|
 | 
						|
	if (vdev->config.intr_type != MSI_X) {
 | 
						|
		netif_napi_add(dev, &vdev->napi, vxge_poll_inta,
 | 
						|
			vdev->config.napi_weight);
 | 
						|
		napi_enable(&vdev->napi);
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			vdev->vpaths[i].ring.napi_p = &vdev->napi;
 | 
						|
	} else {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
			netif_napi_add(dev, &vdev->vpaths[i].ring.napi,
 | 
						|
			    vxge_poll_msix, vdev->config.napi_weight);
 | 
						|
			napi_enable(&vdev->vpaths[i].ring.napi);
 | 
						|
			vdev->vpaths[i].ring.napi_p =
 | 
						|
				&vdev->vpaths[i].ring.napi;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* configure RTH */
 | 
						|
	if (vdev->config.rth_steering) {
 | 
						|
		status = vxge_rth_configure(vdev);
 | 
						|
		if (status != VXGE_HW_OK) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: fatal: RTH configuration failed",
 | 
						|
				dev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out2;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		/* set initial mtu before enabling the device */
 | 
						|
		status = vxge_hw_vpath_mtu_set(vdev->vpaths[i].handle,
 | 
						|
						vdev->mtu);
 | 
						|
		if (status != VXGE_HW_OK) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: fatal: can not set new MTU", dev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto out2;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev);
 | 
						|
	vxge_debug_init(vdev->level_trace,
 | 
						|
		"%s: MTU is %d", vdev->ndev->name, vdev->mtu);
 | 
						|
	VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev);
 | 
						|
 | 
						|
	/* Reprogram the DA table with populated mac addresses */
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		vxge_restore_vpath_mac_addr(&vdev->vpaths[i]);
 | 
						|
		vxge_restore_vpath_vid_table(&vdev->vpaths[i]);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Enable vpath to sniff all unicast/multicast traffic that not
 | 
						|
	 * addressed to them. We allow promiscous mode for PF only
 | 
						|
	 */
 | 
						|
 | 
						|
	val64 = 0;
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
 | 
						|
		val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i);
 | 
						|
 | 
						|
	vxge_hw_mgmt_reg_write(vdev->devh,
 | 
						|
		vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
		0,
 | 
						|
		(ulong)offsetof(struct vxge_hw_mrpcim_reg,
 | 
						|
			rxmac_authorize_all_addr),
 | 
						|
		val64);
 | 
						|
 | 
						|
	vxge_hw_mgmt_reg_write(vdev->devh,
 | 
						|
		vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
		0,
 | 
						|
		(ulong)offsetof(struct vxge_hw_mrpcim_reg,
 | 
						|
			rxmac_authorize_all_vid),
 | 
						|
		val64);
 | 
						|
 | 
						|
	vxge_set_multicast(dev);
 | 
						|
 | 
						|
	/* Enabling Bcast and mcast for all vpath */
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		status = vxge_hw_vpath_bcast_enable(vdev->vpaths[i].handle);
 | 
						|
		if (status != VXGE_HW_OK)
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s : Can not enable bcast for vpath "
 | 
						|
				"id %d", dev->name, i);
 | 
						|
		if (vdev->config.addr_learn_en) {
 | 
						|
			status =
 | 
						|
			    vxge_hw_vpath_mcast_enable(vdev->vpaths[i].handle);
 | 
						|
			if (status != VXGE_HW_OK)
 | 
						|
				vxge_debug_init(VXGE_ERR,
 | 
						|
					"%s : Can not enable mcast for vpath "
 | 
						|
					"id %d", dev->name, i);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_hw_device_setpause_data(vdev->devh, 0,
 | 
						|
		vdev->config.tx_pause_enable,
 | 
						|
		vdev->config.rx_pause_enable);
 | 
						|
 | 
						|
	if (vdev->vp_reset_timer.function == NULL)
 | 
						|
		vxge_os_timer(vdev->vp_reset_timer,
 | 
						|
			vxge_poll_vp_reset, vdev, (HZ/2));
 | 
						|
 | 
						|
	if (vdev->vp_lockup_timer.function == NULL)
 | 
						|
		vxge_os_timer(vdev->vp_lockup_timer,
 | 
						|
			vxge_poll_vp_lockup, vdev, (HZ/2));
 | 
						|
 | 
						|
	set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
 | 
						|
	smp_wmb();
 | 
						|
 | 
						|
	if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) {
 | 
						|
		netif_carrier_on(vdev->ndev);
 | 
						|
		printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name);
 | 
						|
		vdev->stats.link_up++;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_hw_device_intr_enable(vdev->devh);
 | 
						|
 | 
						|
	smp_wmb();
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		vxge_hw_vpath_enable(vdev->vpaths[i].handle);
 | 
						|
		smp_wmb();
 | 
						|
		vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle);
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_start_all_tx_queue(vdev);
 | 
						|
	goto out0;
 | 
						|
 | 
						|
out2:
 | 
						|
	vxge_rem_isr(vdev);
 | 
						|
 | 
						|
	/* Disable napi */
 | 
						|
	if (vdev->config.intr_type != MSI_X)
 | 
						|
		napi_disable(&vdev->napi);
 | 
						|
	else {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			napi_disable(&vdev->vpaths[i].ring.napi);
 | 
						|
	}
 | 
						|
 | 
						|
out1:
 | 
						|
	vxge_close_vpaths(vdev, 0);
 | 
						|
out0:
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
				"%s: %s:%d  Exiting...",
 | 
						|
				dev->name, __func__, __LINE__);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* Loop throught the mac address list and delete all the entries */
 | 
						|
void vxge_free_mac_add_list(struct vxge_vpath *vpath)
 | 
						|
{
 | 
						|
 | 
						|
	struct list_head *entry, *next;
 | 
						|
	if (list_empty(&vpath->mac_addr_list))
 | 
						|
		return;
 | 
						|
 | 
						|
	list_for_each_safe(entry, next, &vpath->mac_addr_list) {
 | 
						|
		list_del(entry);
 | 
						|
		kfree((struct vxge_mac_addrs *)entry);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void vxge_napi_del_all(struct vxgedev *vdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	if (vdev->config.intr_type != MSI_X)
 | 
						|
		netif_napi_del(&vdev->napi);
 | 
						|
	else {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			netif_napi_del(&vdev->vpaths[i].ring.napi);
 | 
						|
	}
 | 
						|
	return;
 | 
						|
}
 | 
						|
 | 
						|
int do_vxge_close(struct net_device *dev, int do_io)
 | 
						|
{
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct __vxge_hw_device *hldev;
 | 
						|
	int i;
 | 
						|
	u64 val64, vpath_vector;
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 | 
						|
		dev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
 | 
						|
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev)))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/* If vxge_handle_crit_err task is executing,
 | 
						|
	 * wait till it completes. */
 | 
						|
	while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
 | 
						|
		msleep(50);
 | 
						|
 | 
						|
	clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
	if (do_io) {
 | 
						|
		/* Put the vpath back in normal mode */
 | 
						|
		vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id);
 | 
						|
		status = vxge_hw_mgmt_reg_read(vdev->devh,
 | 
						|
				vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
				0,
 | 
						|
				(ulong)offsetof(
 | 
						|
					struct vxge_hw_mrpcim_reg,
 | 
						|
					rts_mgr_cbasin_cfg),
 | 
						|
				&val64);
 | 
						|
 | 
						|
		if (status == VXGE_HW_OK) {
 | 
						|
			val64 &= ~vpath_vector;
 | 
						|
			status = vxge_hw_mgmt_reg_write(vdev->devh,
 | 
						|
					vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
					0,
 | 
						|
					(ulong)offsetof(
 | 
						|
						struct vxge_hw_mrpcim_reg,
 | 
						|
						rts_mgr_cbasin_cfg),
 | 
						|
					val64);
 | 
						|
		}
 | 
						|
 | 
						|
		/* Remove the function 0 from promiscous mode */
 | 
						|
		vxge_hw_mgmt_reg_write(vdev->devh,
 | 
						|
			vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
			0,
 | 
						|
			(ulong)offsetof(struct vxge_hw_mrpcim_reg,
 | 
						|
				rxmac_authorize_all_addr),
 | 
						|
			0);
 | 
						|
 | 
						|
		vxge_hw_mgmt_reg_write(vdev->devh,
 | 
						|
			vxge_hw_mgmt_reg_type_mrpcim,
 | 
						|
			0,
 | 
						|
			(ulong)offsetof(struct vxge_hw_mrpcim_reg,
 | 
						|
				rxmac_authorize_all_vid),
 | 
						|
			0);
 | 
						|
 | 
						|
		smp_wmb();
 | 
						|
	}
 | 
						|
	del_timer_sync(&vdev->vp_lockup_timer);
 | 
						|
 | 
						|
	del_timer_sync(&vdev->vp_reset_timer);
 | 
						|
 | 
						|
	/* Disable napi */
 | 
						|
	if (vdev->config.intr_type != MSI_X)
 | 
						|
		napi_disable(&vdev->napi);
 | 
						|
	else {
 | 
						|
		for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
			napi_disable(&vdev->vpaths[i].ring.napi);
 | 
						|
	}
 | 
						|
 | 
						|
	netif_carrier_off(vdev->ndev);
 | 
						|
	printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name);
 | 
						|
	vxge_stop_all_tx_queue(vdev);
 | 
						|
 | 
						|
	/* Note that at this point xmit() is stopped by upper layer */
 | 
						|
	if (do_io)
 | 
						|
		vxge_hw_device_intr_disable(vdev->devh);
 | 
						|
 | 
						|
	mdelay(1000);
 | 
						|
 | 
						|
	vxge_rem_isr(vdev);
 | 
						|
 | 
						|
	vxge_napi_del_all(vdev);
 | 
						|
 | 
						|
	if (do_io)
 | 
						|
		vxge_reset_all_vpaths(vdev);
 | 
						|
 | 
						|
	vxge_close_vpaths(vdev, 0);
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s: %s:%d  Exiting...", dev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open);
 | 
						|
	clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_close
 | 
						|
 * @dev: device pointer.
 | 
						|
 *
 | 
						|
 * This is the stop entry point of the driver. It needs to undo exactly
 | 
						|
 * whatever was done by the open entry point, thus it's usually referred to
 | 
						|
 * as the close function.Among other things this function mainly stops the
 | 
						|
 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
 | 
						|
 * Return value: '0' on success and an appropriate (-)ve integer as
 | 
						|
 * defined in errno.h file on failure.
 | 
						|
 */
 | 
						|
int
 | 
						|
vxge_close(struct net_device *dev)
 | 
						|
{
 | 
						|
	do_vxge_close(dev, 1);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_change_mtu
 | 
						|
 * @dev: net device pointer.
 | 
						|
 * @new_mtu :the new MTU size for the device.
 | 
						|
 *
 | 
						|
 * A driver entry point to change MTU size for the device. Before changing
 | 
						|
 * the MTU the device must be stopped.
 | 
						|
 */
 | 
						|
static int vxge_change_mtu(struct net_device *dev, int new_mtu)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev = netdev_priv(dev);
 | 
						|
 | 
						|
	vxge_debug_entryexit(vdev->level_trace,
 | 
						|
		"%s:%d", __func__, __LINE__);
 | 
						|
	if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) {
 | 
						|
		vxge_debug_init(vdev->level_err,
 | 
						|
			"%s: mtu size is invalid", dev->name);
 | 
						|
		return -EPERM;
 | 
						|
	}
 | 
						|
 | 
						|
	/* check if device is down already */
 | 
						|
	if (unlikely(!is_vxge_card_up(vdev))) {
 | 
						|
		/* just store new value, will use later on open() */
 | 
						|
		dev->mtu = new_mtu;
 | 
						|
		vxge_debug_init(vdev->level_err,
 | 
						|
			"%s", "device is down on MTU change");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_init(vdev->level_trace,
 | 
						|
		"trying to apply new MTU %d", new_mtu);
 | 
						|
 | 
						|
	if (vxge_close(dev))
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	dev->mtu = new_mtu;
 | 
						|
	vdev->mtu = new_mtu;
 | 
						|
 | 
						|
	if (vxge_open(dev))
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	vxge_debug_init(vdev->level_trace,
 | 
						|
		"%s: MTU changed to %d", vdev->ndev->name, new_mtu);
 | 
						|
 | 
						|
	vxge_debug_entryexit(vdev->level_trace,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_get_stats
 | 
						|
 * @dev: pointer to the device structure
 | 
						|
 *
 | 
						|
 * Updates the device statistics structure. This function updates the device
 | 
						|
 * statistics structure in the net_device structure and returns a pointer
 | 
						|
 * to the same.
 | 
						|
 */
 | 
						|
static struct net_device_stats *
 | 
						|
vxge_get_stats(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct net_device_stats *net_stats;
 | 
						|
	int k;
 | 
						|
 | 
						|
	vdev = netdev_priv(dev);
 | 
						|
 | 
						|
	net_stats = &vdev->stats.net_stats;
 | 
						|
 | 
						|
	memset(net_stats, 0, sizeof(struct net_device_stats));
 | 
						|
 | 
						|
	for (k = 0; k < vdev->no_of_vpath; k++) {
 | 
						|
		net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms;
 | 
						|
		net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes;
 | 
						|
		net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors;
 | 
						|
		net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast;
 | 
						|
		net_stats->rx_dropped +=
 | 
						|
			vdev->vpaths[k].ring.stats.rx_dropped;
 | 
						|
 | 
						|
		net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms;
 | 
						|
		net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes;
 | 
						|
		net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors;
 | 
						|
	}
 | 
						|
 | 
						|
	return net_stats;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_ioctl
 | 
						|
 * @dev: Device pointer.
 | 
						|
 * @ifr: An IOCTL specific structure, that can contain a pointer to
 | 
						|
 *       a proprietary structure used to pass information to the driver.
 | 
						|
 * @cmd: This is used to distinguish between the different commands that
 | 
						|
 *       can be passed to the IOCTL functions.
 | 
						|
 *
 | 
						|
 * Entry point for the Ioctl.
 | 
						|
 */
 | 
						|
static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 | 
						|
{
 | 
						|
	return -EOPNOTSUPP;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_tx_watchdog
 | 
						|
 * @dev: pointer to net device structure
 | 
						|
 *
 | 
						|
 * Watchdog for transmit side.
 | 
						|
 * This function is triggered if the Tx Queue is stopped
 | 
						|
 * for a pre-defined amount of time when the Interface is still up.
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_tx_watchdog(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	vdev->cric_err_event = VXGE_HW_EVENT_RESET_START;
 | 
						|
 | 
						|
	vxge_reset(vdev);
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_vlan_rx_register
 | 
						|
 * @dev: net device pointer.
 | 
						|
 * @grp: vlan group
 | 
						|
 *
 | 
						|
 * Vlan group registration
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct vxge_vpath *vpath;
 | 
						|
	int vp;
 | 
						|
	u64 vid;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	int i;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	vpath = &vdev->vpaths[0];
 | 
						|
	if ((NULL == grp) && (vpath->is_open)) {
 | 
						|
		/* Get the first vlan */
 | 
						|
		status = vxge_hw_vpath_vid_get(vpath->handle, &vid);
 | 
						|
 | 
						|
		while (status == VXGE_HW_OK) {
 | 
						|
 | 
						|
			/* Delete this vlan from the vid table */
 | 
						|
			for (vp = 0; vp < vdev->no_of_vpath; vp++) {
 | 
						|
				vpath = &vdev->vpaths[vp];
 | 
						|
				if (!vpath->is_open)
 | 
						|
					continue;
 | 
						|
 | 
						|
				vxge_hw_vpath_vid_delete(vpath->handle, vid);
 | 
						|
			}
 | 
						|
 | 
						|
			/* Get the next vlan to be deleted */
 | 
						|
			vpath = &vdev->vpaths[0];
 | 
						|
			status = vxge_hw_vpath_vid_get(vpath->handle, &vid);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	vdev->vlgrp = grp;
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		if (vdev->vpaths[i].is_configured)
 | 
						|
			vdev->vpaths[i].ring.vlgrp = grp;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_vlan_rx_add_vid
 | 
						|
 * @dev: net device pointer.
 | 
						|
 * @vid: vid
 | 
						|
 *
 | 
						|
 * Add the vlan id to the devices vlan id table
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct vxge_vpath *vpath;
 | 
						|
	int vp_id;
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	/* Add these vlan to the vid table */
 | 
						|
	for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
 | 
						|
		vpath = &vdev->vpaths[vp_id];
 | 
						|
		if (!vpath->is_open)
 | 
						|
			continue;
 | 
						|
		vxge_hw_vpath_vid_add(vpath->handle, vid);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_vlan_rx_add_vid
 | 
						|
 * @dev: net device pointer.
 | 
						|
 * @vid: vid
 | 
						|
 *
 | 
						|
 * Remove the vlan id from the device's vlan id table
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct vxge_vpath *vpath;
 | 
						|
	int vp_id;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
 | 
						|
	vlan_group_set_device(vdev->vlgrp, vid, NULL);
 | 
						|
 | 
						|
	/* Delete this vlan from the vid table */
 | 
						|
	for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
 | 
						|
		vpath = &vdev->vpaths[vp_id];
 | 
						|
		if (!vpath->is_open)
 | 
						|
			continue;
 | 
						|
		vxge_hw_vpath_vid_delete(vpath->handle, vid);
 | 
						|
	}
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
static const struct net_device_ops vxge_netdev_ops = {
 | 
						|
	.ndo_open               = vxge_open,
 | 
						|
	.ndo_stop               = vxge_close,
 | 
						|
	.ndo_get_stats          = vxge_get_stats,
 | 
						|
	.ndo_start_xmit         = vxge_xmit,
 | 
						|
	.ndo_validate_addr      = eth_validate_addr,
 | 
						|
	.ndo_set_multicast_list = vxge_set_multicast,
 | 
						|
 | 
						|
	.ndo_do_ioctl           = vxge_ioctl,
 | 
						|
 | 
						|
	.ndo_set_mac_address    = vxge_set_mac_addr,
 | 
						|
	.ndo_change_mtu         = vxge_change_mtu,
 | 
						|
	.ndo_vlan_rx_register   = vxge_vlan_rx_register,
 | 
						|
	.ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid,
 | 
						|
	.ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid,
 | 
						|
 | 
						|
	.ndo_tx_timeout         = vxge_tx_watchdog,
 | 
						|
#ifdef CONFIG_NET_POLL_CONTROLLER
 | 
						|
	.ndo_poll_controller    = vxge_netpoll,
 | 
						|
#endif
 | 
						|
};
 | 
						|
 | 
						|
int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 | 
						|
				   struct vxge_config *config,
 | 
						|
				   int high_dma, int no_of_vpath,
 | 
						|
				   struct vxgedev **vdev_out)
 | 
						|
{
 | 
						|
	struct net_device *ndev;
 | 
						|
	enum vxge_hw_status status = VXGE_HW_OK;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	int i, ret = 0, no_of_queue = 1;
 | 
						|
	u64 stat;
 | 
						|
 | 
						|
	*vdev_out = NULL;
 | 
						|
	if (config->tx_steering_type == TX_MULTIQ_STEERING)
 | 
						|
		no_of_queue = no_of_vpath;
 | 
						|
 | 
						|
	ndev = alloc_etherdev_mq(sizeof(struct vxgedev),
 | 
						|
			no_of_queue);
 | 
						|
	if (ndev == NULL) {
 | 
						|
		vxge_debug_init(
 | 
						|
			vxge_hw_device_trace_level_get(hldev),
 | 
						|
		"%s : device allocation failed", __func__);
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto _out0;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_entryexit(
 | 
						|
		vxge_hw_device_trace_level_get(hldev),
 | 
						|
		"%s: %s:%d  Entering...",
 | 
						|
		ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	vdev = netdev_priv(ndev);
 | 
						|
	memset(vdev, 0, sizeof(struct vxgedev));
 | 
						|
 | 
						|
	vdev->ndev = ndev;
 | 
						|
	vdev->devh = hldev;
 | 
						|
	vdev->pdev = hldev->pdev;
 | 
						|
	memcpy(&vdev->config, config, sizeof(struct vxge_config));
 | 
						|
	vdev->rx_csum = 1;	/* Enable Rx CSUM by default. */
 | 
						|
 | 
						|
	SET_NETDEV_DEV(ndev, &vdev->pdev->dev);
 | 
						|
 | 
						|
	ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
 | 
						|
				NETIF_F_HW_VLAN_FILTER;
 | 
						|
	/*  Driver entry points */
 | 
						|
	ndev->irq = vdev->pdev->irq;
 | 
						|
	ndev->base_addr = (unsigned long) hldev->bar0;
 | 
						|
 | 
						|
	ndev->netdev_ops = &vxge_netdev_ops;
 | 
						|
 | 
						|
	ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT;
 | 
						|
 | 
						|
	initialize_ethtool_ops(ndev);
 | 
						|
 | 
						|
	/* Allocate memory for vpath */
 | 
						|
	vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) *
 | 
						|
				no_of_vpath, GFP_KERNEL);
 | 
						|
	if (!vdev->vpaths) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: vpath memory allocation failed",
 | 
						|
			vdev->ndev->name);
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto _out1;
 | 
						|
	}
 | 
						|
 | 
						|
	ndev->features |= NETIF_F_SG;
 | 
						|
 | 
						|
	ndev->features |= NETIF_F_HW_CSUM;
 | 
						|
	vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 | 
						|
		"%s : checksuming enabled", __func__);
 | 
						|
 | 
						|
	if (high_dma) {
 | 
						|
		ndev->features |= NETIF_F_HIGHDMA;
 | 
						|
		vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 | 
						|
			"%s : using High DMA", __func__);
 | 
						|
	}
 | 
						|
 | 
						|
	ndev->features |= NETIF_F_TSO | NETIF_F_TSO6;
 | 
						|
 | 
						|
	if (vdev->config.gro_enable)
 | 
						|
		ndev->features |= NETIF_F_GRO;
 | 
						|
 | 
						|
	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING)
 | 
						|
		ndev->real_num_tx_queues = no_of_vpath;
 | 
						|
 | 
						|
#ifdef NETIF_F_LLTX
 | 
						|
	ndev->features |= NETIF_F_LLTX;
 | 
						|
#endif
 | 
						|
 | 
						|
	for (i = 0; i < no_of_vpath; i++)
 | 
						|
		spin_lock_init(&vdev->vpaths[i].fifo.tx_lock);
 | 
						|
 | 
						|
	if (register_netdev(ndev)) {
 | 
						|
		vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 | 
						|
			"%s: %s : device registration failed!",
 | 
						|
			ndev->name, __func__);
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto _out2;
 | 
						|
	}
 | 
						|
 | 
						|
	/*  Set the factory defined MAC address initially */
 | 
						|
	ndev->addr_len = ETH_ALEN;
 | 
						|
 | 
						|
	/* Make Link state as off at this point, when the Link change
 | 
						|
	 * interrupt comes the state will be automatically changed to
 | 
						|
	 * the right state.
 | 
						|
	 */
 | 
						|
	netif_carrier_off(ndev);
 | 
						|
 | 
						|
	vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 | 
						|
		"%s: Ethernet device registered",
 | 
						|
		ndev->name);
 | 
						|
 | 
						|
	*vdev_out = vdev;
 | 
						|
 | 
						|
	/* Resetting the Device stats */
 | 
						|
	status = vxge_hw_mrpcim_stats_access(
 | 
						|
				hldev,
 | 
						|
				VXGE_HW_STATS_OP_CLEAR_ALL_STATS,
 | 
						|
				0,
 | 
						|
				0,
 | 
						|
				&stat);
 | 
						|
 | 
						|
	if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION)
 | 
						|
		vxge_debug_init(
 | 
						|
			vxge_hw_device_trace_level_get(hldev),
 | 
						|
			"%s: device stats clear returns"
 | 
						|
			"VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name);
 | 
						|
 | 
						|
	vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev),
 | 
						|
		"%s: %s:%d  Exiting...",
 | 
						|
		ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	return ret;
 | 
						|
_out2:
 | 
						|
	kfree(vdev->vpaths);
 | 
						|
_out1:
 | 
						|
	free_netdev(ndev);
 | 
						|
_out0:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_device_unregister
 | 
						|
 *
 | 
						|
 * This function will unregister and free network device
 | 
						|
 */
 | 
						|
void
 | 
						|
vxge_device_unregister(struct __vxge_hw_device *hldev)
 | 
						|
{
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct net_device *dev;
 | 
						|
	char buf[IFNAMSIZ];
 | 
						|
#if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
 | 
						|
	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
 | 
						|
	u32 level_trace;
 | 
						|
#endif
 | 
						|
 | 
						|
	dev = hldev->ndev;
 | 
						|
	vdev = netdev_priv(dev);
 | 
						|
#if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
 | 
						|
	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
 | 
						|
	level_trace = vdev->level_trace;
 | 
						|
#endif
 | 
						|
	vxge_debug_entryexit(level_trace,
 | 
						|
		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	memcpy(buf, vdev->ndev->name, IFNAMSIZ);
 | 
						|
 | 
						|
	/* in 2.6 will call stop() if device is up */
 | 
						|
	unregister_netdev(dev);
 | 
						|
 | 
						|
	flush_scheduled_work();
 | 
						|
 | 
						|
	vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf);
 | 
						|
	vxge_debug_entryexit(level_trace,
 | 
						|
		"%s: %s:%d  Exiting...", buf, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * vxge_callback_crit_err
 | 
						|
 *
 | 
						|
 * This function is called by the alarm handler in interrupt context.
 | 
						|
 * Driver must analyze it based on the event type.
 | 
						|
 */
 | 
						|
static void
 | 
						|
vxge_callback_crit_err(struct __vxge_hw_device *hldev,
 | 
						|
			enum vxge_hw_event type, u64 vp_id)
 | 
						|
{
 | 
						|
	struct net_device *dev = hldev->ndev;
 | 
						|
	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
 | 
						|
	int vpath_idx;
 | 
						|
 | 
						|
	vxge_debug_entryexit(vdev->level_trace,
 | 
						|
		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	/* Note: This event type should be used for device wide
 | 
						|
	 * indications only - Serious errors, Slot freeze and critical errors
 | 
						|
	 */
 | 
						|
	vdev->cric_err_event = type;
 | 
						|
 | 
						|
	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++)
 | 
						|
		if (vdev->vpaths[vpath_idx].device_id == vp_id)
 | 
						|
			break;
 | 
						|
 | 
						|
	if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) {
 | 
						|
		if (type == VXGE_HW_EVENT_SLOT_FREEZE) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: Slot is frozen", vdev->ndev->name);
 | 
						|
		} else if (type == VXGE_HW_EVENT_SERR) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: Encountered Serious Error",
 | 
						|
				vdev->ndev->name);
 | 
						|
		} else if (type == VXGE_HW_EVENT_CRITICAL_ERR)
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: Encountered Critical Error",
 | 
						|
				vdev->ndev->name);
 | 
						|
	}
 | 
						|
 | 
						|
	if ((type == VXGE_HW_EVENT_SERR) ||
 | 
						|
		(type == VXGE_HW_EVENT_SLOT_FREEZE)) {
 | 
						|
		if (unlikely(vdev->exec_mode))
 | 
						|
			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
	} else if (type == VXGE_HW_EVENT_CRITICAL_ERR) {
 | 
						|
		vxge_hw_device_mask_all(hldev);
 | 
						|
		if (unlikely(vdev->exec_mode))
 | 
						|
			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
	} else if ((type == VXGE_HW_EVENT_FIFO_ERR) ||
 | 
						|
		  (type == VXGE_HW_EVENT_VPATH_ERR)) {
 | 
						|
 | 
						|
		if (unlikely(vdev->exec_mode))
 | 
						|
			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
 | 
						|
		else {
 | 
						|
			/* check if this vpath is already set for reset */
 | 
						|
			if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) {
 | 
						|
 | 
						|
				/* disable interrupts for this vpath */
 | 
						|
				vxge_vpath_intr_disable(vdev, vpath_idx);
 | 
						|
 | 
						|
				/* stop the queue for this vpath */
 | 
						|
				vxge_stop_tx_queue(&vdev->vpaths[vpath_idx].
 | 
						|
							fifo);
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_entryexit(vdev->level_trace,
 | 
						|
		"%s: %s:%d  Exiting...",
 | 
						|
		vdev->ndev->name, __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
static void verify_bandwidth(void)
 | 
						|
{
 | 
						|
	int i, band_width, total = 0, equal_priority = 0;
 | 
						|
 | 
						|
	/* 1. If user enters 0 for some fifo, give equal priority to all */
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
		if (bw_percentage[i] == 0) {
 | 
						|
			equal_priority = 1;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (!equal_priority) {
 | 
						|
		/* 2. If sum exceeds 100, give equal priority to all */
 | 
						|
		for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
			if (bw_percentage[i] == 0xFF)
 | 
						|
				break;
 | 
						|
 | 
						|
			total += bw_percentage[i];
 | 
						|
			if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) {
 | 
						|
				equal_priority = 1;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (!equal_priority) {
 | 
						|
		/* Is all the bandwidth consumed? */
 | 
						|
		if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) {
 | 
						|
			if (i < VXGE_HW_MAX_VIRTUAL_PATHS) {
 | 
						|
				/* Split rest of bw equally among next VPs*/
 | 
						|
				band_width =
 | 
						|
				  (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) /
 | 
						|
					(VXGE_HW_MAX_VIRTUAL_PATHS - i);
 | 
						|
				if (band_width < 2) /* min of 2% */
 | 
						|
					equal_priority = 1;
 | 
						|
				else {
 | 
						|
					for (; i < VXGE_HW_MAX_VIRTUAL_PATHS;
 | 
						|
						i++)
 | 
						|
						bw_percentage[i] =
 | 
						|
							band_width;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		} else if (i < VXGE_HW_MAX_VIRTUAL_PATHS)
 | 
						|
			equal_priority = 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (equal_priority) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Assigning equal bandwidth to all the vpaths",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX /
 | 
						|
					VXGE_HW_MAX_VIRTUAL_PATHS;
 | 
						|
		for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
 | 
						|
			bw_percentage[i] = bw_percentage[0];
 | 
						|
	}
 | 
						|
 | 
						|
	return;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Vpath configuration
 | 
						|
 */
 | 
						|
static int __devinit vxge_config_vpaths(
 | 
						|
			struct vxge_hw_device_config *device_config,
 | 
						|
			u64 vpath_mask, struct vxge_config *config_param)
 | 
						|
{
 | 
						|
	int i, no_of_vpaths = 0, default_no_vpath = 0, temp;
 | 
						|
	u32 txdl_size, txdl_per_memblock;
 | 
						|
 | 
						|
	temp = driver_config->vpath_per_dev;
 | 
						|
	if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) &&
 | 
						|
		(max_config_dev == VXGE_MAX_CONFIG_DEV)) {
 | 
						|
		/* No more CPU. Return vpath number as zero.*/
 | 
						|
		if (driver_config->g_no_cpus == -1)
 | 
						|
			return 0;
 | 
						|
 | 
						|
		if (!driver_config->g_no_cpus)
 | 
						|
			driver_config->g_no_cpus = num_online_cpus();
 | 
						|
 | 
						|
		driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1;
 | 
						|
		if (!driver_config->vpath_per_dev)
 | 
						|
			driver_config->vpath_per_dev = 1;
 | 
						|
 | 
						|
		for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
 | 
						|
			if (!vxge_bVALn(vpath_mask, i, 1))
 | 
						|
				continue;
 | 
						|
			else
 | 
						|
				default_no_vpath++;
 | 
						|
		if (default_no_vpath < driver_config->vpath_per_dev)
 | 
						|
			driver_config->vpath_per_dev = default_no_vpath;
 | 
						|
 | 
						|
		driver_config->g_no_cpus = driver_config->g_no_cpus -
 | 
						|
				(driver_config->vpath_per_dev * 2);
 | 
						|
		if (driver_config->g_no_cpus <= 0)
 | 
						|
			driver_config->g_no_cpus = -1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (driver_config->vpath_per_dev == 1) {
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s: Disable tx and rx steering, "
 | 
						|
			"as single vpath is configured", VXGE_DRIVER_NAME);
 | 
						|
		config_param->rth_steering = NO_STEERING;
 | 
						|
		config_param->tx_steering_type = NO_STEERING;
 | 
						|
		device_config->rth_en = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* configure bandwidth */
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
 | 
						|
		device_config->vp_config[i].min_bandwidth = bw_percentage[i];
 | 
						|
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
		device_config->vp_config[i].vp_id = i;
 | 
						|
		device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU;
 | 
						|
		if (no_of_vpaths < driver_config->vpath_per_dev) {
 | 
						|
			if (!vxge_bVALn(vpath_mask, i, 1)) {
 | 
						|
				vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
					"%s: vpath: %d is not available",
 | 
						|
					VXGE_DRIVER_NAME, i);
 | 
						|
				continue;
 | 
						|
			} else {
 | 
						|
				vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
					"%s: vpath: %d available",
 | 
						|
					VXGE_DRIVER_NAME, i);
 | 
						|
				no_of_vpaths++;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
				"%s: vpath: %d is not configured, "
 | 
						|
				"max_config_vpath exceeded",
 | 
						|
				VXGE_DRIVER_NAME, i);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		/* Configure Tx fifo's */
 | 
						|
		device_config->vp_config[i].fifo.enable =
 | 
						|
						VXGE_HW_FIFO_ENABLE;
 | 
						|
		device_config->vp_config[i].fifo.max_frags =
 | 
						|
				MAX_SKB_FRAGS;
 | 
						|
		device_config->vp_config[i].fifo.memblock_size =
 | 
						|
			VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE;
 | 
						|
 | 
						|
		txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd);
 | 
						|
		txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size;
 | 
						|
 | 
						|
		device_config->vp_config[i].fifo.fifo_blocks =
 | 
						|
			((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1;
 | 
						|
 | 
						|
		device_config->vp_config[i].fifo.intr =
 | 
						|
				VXGE_HW_FIFO_QUEUE_INTR_DISABLE;
 | 
						|
 | 
						|
		/* Configure tti properties */
 | 
						|
		device_config->vp_config[i].tti.intr_enable =
 | 
						|
					VXGE_HW_TIM_INTR_ENABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.btimer_val =
 | 
						|
			(VXGE_TTI_BTIMER_VAL * 1000) / 272;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.timer_ac_en =
 | 
						|
				VXGE_HW_TIM_TIMER_AC_ENABLE;
 | 
						|
 | 
						|
		/* For msi-x with napi (each vector
 | 
						|
		has a handler of its own) -
 | 
						|
		Set CI to OFF for all vpaths */
 | 
						|
		device_config->vp_config[i].tti.timer_ci_en =
 | 
						|
			VXGE_HW_TIM_TIMER_CI_DISABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.timer_ri_en =
 | 
						|
				VXGE_HW_TIM_TIMER_RI_DISABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.util_sel =
 | 
						|
			VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.ltimer_val =
 | 
						|
			(VXGE_TTI_LTIMER_VAL * 1000) / 272;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.rtimer_val =
 | 
						|
			(VXGE_TTI_RTIMER_VAL * 1000) / 272;
 | 
						|
 | 
						|
		device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A;
 | 
						|
		device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B;
 | 
						|
		device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C;
 | 
						|
		device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A;
 | 
						|
		device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B;
 | 
						|
		device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C;
 | 
						|
		device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D;
 | 
						|
 | 
						|
		/* Configure Rx rings */
 | 
						|
		device_config->vp_config[i].ring.enable  =
 | 
						|
						VXGE_HW_RING_ENABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].ring.ring_blocks  =
 | 
						|
						VXGE_HW_DEF_RING_BLOCKS;
 | 
						|
		device_config->vp_config[i].ring.buffer_mode =
 | 
						|
			VXGE_HW_RING_RXD_BUFFER_MODE_1;
 | 
						|
		device_config->vp_config[i].ring.rxds_limit  =
 | 
						|
				VXGE_HW_DEF_RING_RXDS_LIMIT;
 | 
						|
		device_config->vp_config[i].ring.scatter_mode =
 | 
						|
					VXGE_HW_RING_SCATTER_MODE_A;
 | 
						|
 | 
						|
		/* Configure rti properties */
 | 
						|
		device_config->vp_config[i].rti.intr_enable =
 | 
						|
					VXGE_HW_TIM_INTR_ENABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.btimer_val =
 | 
						|
			(VXGE_RTI_BTIMER_VAL * 1000)/272;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.timer_ac_en =
 | 
						|
						VXGE_HW_TIM_TIMER_AC_ENABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.timer_ci_en =
 | 
						|
						VXGE_HW_TIM_TIMER_CI_DISABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.timer_ri_en =
 | 
						|
						VXGE_HW_TIM_TIMER_RI_DISABLE;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.util_sel =
 | 
						|
				VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.urange_a =
 | 
						|
						RTI_RX_URANGE_A;
 | 
						|
		device_config->vp_config[i].rti.urange_b =
 | 
						|
						RTI_RX_URANGE_B;
 | 
						|
		device_config->vp_config[i].rti.urange_c =
 | 
						|
						RTI_RX_URANGE_C;
 | 
						|
		device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A;
 | 
						|
		device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B;
 | 
						|
		device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C;
 | 
						|
		device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.rtimer_val =
 | 
						|
			(VXGE_RTI_RTIMER_VAL * 1000) / 272;
 | 
						|
 | 
						|
		device_config->vp_config[i].rti.ltimer_val =
 | 
						|
			(VXGE_RTI_LTIMER_VAL * 1000) / 272;
 | 
						|
 | 
						|
		device_config->vp_config[i].rpa_strip_vlan_tag =
 | 
						|
			vlan_tag_strip;
 | 
						|
	}
 | 
						|
 | 
						|
	driver_config->vpath_per_dev = temp;
 | 
						|
	return no_of_vpaths;
 | 
						|
}
 | 
						|
 | 
						|
/* initialize device configuratrions */
 | 
						|
static void __devinit vxge_device_config_init(
 | 
						|
				struct vxge_hw_device_config *device_config,
 | 
						|
				int *intr_type)
 | 
						|
{
 | 
						|
	/* Used for CQRQ/SRQ. */
 | 
						|
	device_config->dma_blockpool_initial =
 | 
						|
			VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE;
 | 
						|
 | 
						|
	device_config->dma_blockpool_max =
 | 
						|
			VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE;
 | 
						|
 | 
						|
	if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT)
 | 
						|
		max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT;
 | 
						|
 | 
						|
#ifndef CONFIG_PCI_MSI
 | 
						|
	vxge_debug_init(VXGE_ERR,
 | 
						|
		"%s: This Kernel does not support "
 | 
						|
		"MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME);
 | 
						|
	*intr_type = INTA;
 | 
						|
#endif
 | 
						|
 | 
						|
	/* Configure whether MSI-X or IRQL. */
 | 
						|
	switch (*intr_type) {
 | 
						|
	case INTA:
 | 
						|
		device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE;
 | 
						|
		break;
 | 
						|
 | 
						|
	case MSI_X:
 | 
						|
		device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
	/* Timer period between device poll */
 | 
						|
	device_config->device_poll_millis = VXGE_TIMER_DELAY;
 | 
						|
 | 
						|
	/* Configure mac based steering. */
 | 
						|
	device_config->rts_mac_en = addr_learn_en;
 | 
						|
 | 
						|
	/* Configure Vpaths */
 | 
						|
	device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT;
 | 
						|
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ",
 | 
						|
			__func__);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d",
 | 
						|
			device_config->dma_blockpool_initial);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d",
 | 
						|
			device_config->dma_blockpool_max);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d",
 | 
						|
			device_config->intr_mode);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d",
 | 
						|
			device_config->device_poll_millis);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d",
 | 
						|
			device_config->rts_mac_en);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d",
 | 
						|
			device_config->rth_en);
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d",
 | 
						|
			device_config->rth_it_type);
 | 
						|
}
 | 
						|
 | 
						|
static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE,
 | 
						|
		"%s: %d Vpath(s) opened",
 | 
						|
		vdev->ndev->name, vdev->no_of_vpath);
 | 
						|
 | 
						|
	switch (vdev->config.intr_type) {
 | 
						|
	case INTA:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Interrupt type INTA", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
 | 
						|
	case MSI_X:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Interrupt type MSI-X", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.rth_steering) {
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: RTH steering enabled for TCP_IPV4",
 | 
						|
			vdev->ndev->name);
 | 
						|
	} else {
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: RTH steering disabled", vdev->ndev->name);
 | 
						|
	}
 | 
						|
 | 
						|
	switch (vdev->config.tx_steering_type) {
 | 
						|
	case NO_STEERING:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx steering disabled", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
	case TX_PRIORITY_STEERING:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Unsupported tx steering option",
 | 
						|
			vdev->ndev->name);
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx steering disabled", vdev->ndev->name);
 | 
						|
		vdev->config.tx_steering_type = 0;
 | 
						|
		break;
 | 
						|
	case TX_VLAN_STEERING:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Unsupported tx steering option",
 | 
						|
			vdev->ndev->name);
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx steering disabled", vdev->ndev->name);
 | 
						|
		vdev->config.tx_steering_type = 0;
 | 
						|
		break;
 | 
						|
	case TX_MULTIQ_STEERING:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx multiqueue steering enabled",
 | 
						|
			vdev->ndev->name);
 | 
						|
		break;
 | 
						|
	case TX_PORT_STEERING:
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx port steering enabled",
 | 
						|
			vdev->ndev->name);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Unsupported tx steering type",
 | 
						|
			vdev->ndev->name);
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Tx steering disabled", vdev->ndev->name);
 | 
						|
		vdev->config.tx_steering_type = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (vdev->config.gro_enable) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Generic receive offload enabled",
 | 
						|
			vdev->ndev->name);
 | 
						|
	} else
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Generic receive offload disabled",
 | 
						|
			vdev->ndev->name);
 | 
						|
 | 
						|
	if (vdev->config.addr_learn_en)
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: MAC Address learning enabled", vdev->ndev->name);
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE,
 | 
						|
		"%s: Rx doorbell mode enabled", vdev->ndev->name);
 | 
						|
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
		if (!vxge_bVALn(vpath_mask, i, 1))
 | 
						|
			continue;
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s: MTU size - %d", vdev->ndev->name,
 | 
						|
			((struct __vxge_hw_device  *)(vdev->devh))->
 | 
						|
				config.vp_config[i].mtu);
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: VLAN tag stripping %s", vdev->ndev->name,
 | 
						|
			((struct __vxge_hw_device  *)(vdev->devh))->
 | 
						|
				config.vp_config[i].rpa_strip_vlan_tag
 | 
						|
			? "Enabled" : "Disabled");
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Ring blocks : %d", vdev->ndev->name,
 | 
						|
			((struct __vxge_hw_device  *)(vdev->devh))->
 | 
						|
				config.vp_config[i].ring.ring_blocks);
 | 
						|
		vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Fifo blocks : %d", vdev->ndev->name,
 | 
						|
			((struct __vxge_hw_device  *)(vdev->devh))->
 | 
						|
				config.vp_config[i].fifo.fifo_blocks);
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s: Max frags : %d", vdev->ndev->name,
 | 
						|
			((struct __vxge_hw_device  *)(vdev->devh))->
 | 
						|
				config.vp_config[i].fifo.max_frags);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM
 | 
						|
/**
 | 
						|
 * vxge_pm_suspend - vxge power management suspend entry point
 | 
						|
 *
 | 
						|
 */
 | 
						|
static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state)
 | 
						|
{
 | 
						|
	return -ENOSYS;
 | 
						|
}
 | 
						|
/**
 | 
						|
 * vxge_pm_resume - vxge power management resume entry point
 | 
						|
 *
 | 
						|
 */
 | 
						|
static int vxge_pm_resume(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	return -ENOSYS;
 | 
						|
}
 | 
						|
 | 
						|
#endif
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_io_error_detected - called when PCI error is detected
 | 
						|
 * @pdev: Pointer to PCI device
 | 
						|
 * @state: The current pci connection state
 | 
						|
 *
 | 
						|
 * This function is called after a PCI bus error affecting
 | 
						|
 * this device has been detected.
 | 
						|
 */
 | 
						|
static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev,
 | 
						|
						pci_channel_state_t state)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev =
 | 
						|
		(struct __vxge_hw_device  *) pci_get_drvdata(pdev);
 | 
						|
	struct net_device *netdev = hldev->ndev;
 | 
						|
 | 
						|
	netif_device_detach(netdev);
 | 
						|
 | 
						|
	if (state == pci_channel_io_perm_failure)
 | 
						|
		return PCI_ERS_RESULT_DISCONNECT;
 | 
						|
 | 
						|
	if (netif_running(netdev)) {
 | 
						|
		/* Bring down the card, while avoiding PCI I/O */
 | 
						|
		do_vxge_close(netdev, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	pci_disable_device(pdev);
 | 
						|
 | 
						|
	return PCI_ERS_RESULT_NEED_RESET;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_io_slot_reset - called after the pci bus has been reset.
 | 
						|
 * @pdev: Pointer to PCI device
 | 
						|
 *
 | 
						|
 * Restart the card from scratch, as if from a cold-boot.
 | 
						|
 * At this point, the card has exprienced a hard reset,
 | 
						|
 * followed by fixups by BIOS, and has its config space
 | 
						|
 * set up identically to what it was at cold boot.
 | 
						|
 */
 | 
						|
static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev =
 | 
						|
		(struct __vxge_hw_device  *) pci_get_drvdata(pdev);
 | 
						|
	struct net_device *netdev = hldev->ndev;
 | 
						|
 | 
						|
	struct vxgedev *vdev = netdev_priv(netdev);
 | 
						|
 | 
						|
	if (pci_enable_device(pdev)) {
 | 
						|
		printk(KERN_ERR "%s: "
 | 
						|
			"Cannot re-enable device after reset\n",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		return PCI_ERS_RESULT_DISCONNECT;
 | 
						|
	}
 | 
						|
 | 
						|
	pci_set_master(pdev);
 | 
						|
	vxge_reset(vdev);
 | 
						|
 | 
						|
	return PCI_ERS_RESULT_RECOVERED;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_io_resume - called when traffic can start flowing again.
 | 
						|
 * @pdev: Pointer to PCI device
 | 
						|
 *
 | 
						|
 * This callback is called when the error recovery driver tells
 | 
						|
 * us that its OK to resume normal operation.
 | 
						|
 */
 | 
						|
static void vxge_io_resume(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev =
 | 
						|
		(struct __vxge_hw_device  *) pci_get_drvdata(pdev);
 | 
						|
	struct net_device *netdev = hldev->ndev;
 | 
						|
 | 
						|
	if (netif_running(netdev)) {
 | 
						|
		if (vxge_open(netdev)) {
 | 
						|
			printk(KERN_ERR "%s: "
 | 
						|
				"Can't bring device back up after reset\n",
 | 
						|
				VXGE_DRIVER_NAME);
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	netif_device_attach(netdev);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_probe
 | 
						|
 * @pdev : structure containing the PCI related information of the device.
 | 
						|
 * @pre: List of PCI devices supported by the driver listed in vxge_id_table.
 | 
						|
 * Description:
 | 
						|
 * This function is called when a new PCI device gets detected and initializes
 | 
						|
 * it.
 | 
						|
 * Return value:
 | 
						|
 * returns 0 on success and negative on failure.
 | 
						|
 *
 | 
						|
 */
 | 
						|
static int __devinit
 | 
						|
vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	enum vxge_hw_status status;
 | 
						|
	int ret;
 | 
						|
	int high_dma = 0;
 | 
						|
	u64 vpath_mask = 0;
 | 
						|
	struct vxgedev *vdev;
 | 
						|
	struct vxge_config ll_config;
 | 
						|
	struct vxge_hw_device_config *device_config = NULL;
 | 
						|
	struct vxge_hw_device_attr attr;
 | 
						|
	int i, j, no_of_vpath = 0, max_vpath_supported = 0;
 | 
						|
	u8 *macaddr;
 | 
						|
	struct vxge_mac_addrs *entry;
 | 
						|
	static int bus = -1, device = -1;
 | 
						|
	u8 new_device = 0;
 | 
						|
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 | 
						|
	attr.pdev = pdev;
 | 
						|
 | 
						|
	if (bus != pdev->bus->number)
 | 
						|
		new_device = 1;
 | 
						|
	if (device != PCI_SLOT(pdev->devfn))
 | 
						|
		new_device = 1;
 | 
						|
 | 
						|
	bus = pdev->bus->number;
 | 
						|
	device = PCI_SLOT(pdev->devfn);
 | 
						|
 | 
						|
	if (new_device) {
 | 
						|
		if (driver_config->config_dev_cnt &&
 | 
						|
		   (driver_config->config_dev_cnt !=
 | 
						|
			driver_config->total_dev_cnt))
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: Configured %d of %d devices",
 | 
						|
				VXGE_DRIVER_NAME,
 | 
						|
				driver_config->config_dev_cnt,
 | 
						|
				driver_config->total_dev_cnt);
 | 
						|
		driver_config->config_dev_cnt = 0;
 | 
						|
		driver_config->total_dev_cnt = 0;
 | 
						|
		driver_config->g_no_cpus = 0;
 | 
						|
		driver_config->vpath_per_dev = max_config_vpath;
 | 
						|
	}
 | 
						|
 | 
						|
	driver_config->total_dev_cnt++;
 | 
						|
	if (++driver_config->config_dev_cnt > max_config_dev) {
 | 
						|
		ret = 0;
 | 
						|
		goto _exit0;
 | 
						|
	}
 | 
						|
 | 
						|
	device_config = kzalloc(sizeof(struct vxge_hw_device_config),
 | 
						|
		GFP_KERNEL);
 | 
						|
	if (!device_config) {
 | 
						|
		ret = -ENOMEM;
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"device_config : malloc failed %s %d",
 | 
						|
			__FILE__, __LINE__);
 | 
						|
		goto _exit0;
 | 
						|
	}
 | 
						|
 | 
						|
	memset(&ll_config, 0, sizeof(struct vxge_config));
 | 
						|
	ll_config.tx_steering_type = TX_MULTIQ_STEERING;
 | 
						|
	ll_config.intr_type = MSI_X;
 | 
						|
	ll_config.napi_weight = NEW_NAPI_WEIGHT;
 | 
						|
	ll_config.rth_steering = RTH_STEERING;
 | 
						|
 | 
						|
	/* get the default configuration parameters */
 | 
						|
	vxge_hw_device_config_default_get(device_config);
 | 
						|
 | 
						|
	/* initialize configuration parameters */
 | 
						|
	vxge_device_config_init(device_config, &ll_config.intr_type);
 | 
						|
 | 
						|
	ret = pci_enable_device(pdev);
 | 
						|
	if (ret) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s : can not enable PCI device", __func__);
 | 
						|
		goto _exit0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s : using 64bit DMA", __func__);
 | 
						|
 | 
						|
		high_dma = 1;
 | 
						|
 | 
						|
		if (pci_set_consistent_dma_mask(pdev,
 | 
						|
						0xffffffffffffffffULL)) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s : unable to obtain 64bit DMA for "
 | 
						|
				"consistent allocations", __func__);
 | 
						|
			ret = -ENOMEM;
 | 
						|
			goto _exit1;
 | 
						|
		}
 | 
						|
	} else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) {
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s : using 32bit DMA", __func__);
 | 
						|
	} else {
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto _exit1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s : request regions failed", __func__);
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto _exit1;
 | 
						|
	}
 | 
						|
 | 
						|
	pci_set_master(pdev);
 | 
						|
 | 
						|
	attr.bar0 = pci_ioremap_bar(pdev, 0);
 | 
						|
	if (!attr.bar0) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s : cannot remap io memory bar0", __func__);
 | 
						|
		ret = -ENODEV;
 | 
						|
		goto _exit2;
 | 
						|
	}
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
		"pci ioremap bar0: %p:0x%llx",
 | 
						|
		attr.bar0,
 | 
						|
		(unsigned long long)pci_resource_start(pdev, 0));
 | 
						|
 | 
						|
	status = vxge_hw_device_hw_info_get(attr.bar0,
 | 
						|
			&ll_config.device_hw_info);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Reading of hardware info failed."
 | 
						|
			"Please try upgrading the firmware.", VXGE_DRIVER_NAME);
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto _exit3;
 | 
						|
	}
 | 
						|
 | 
						|
	if (ll_config.device_hw_info.fw_version.major !=
 | 
						|
		VXGE_DRIVER_FW_VERSION_MAJOR) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Incorrect firmware version."
 | 
						|
			"Please upgrade the firmware to version 1.x.x",
 | 
						|
			VXGE_DRIVER_NAME);
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto _exit3;
 | 
						|
	}
 | 
						|
 | 
						|
	vpath_mask = ll_config.device_hw_info.vpath_mask;
 | 
						|
	if (vpath_mask == 0) {
 | 
						|
		vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
			"%s: No vpaths available in device", VXGE_DRIVER_NAME);
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto _exit3;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_debug_ll_config(VXGE_TRACE,
 | 
						|
		"%s:%d  Vpath mask = %llx", __func__, __LINE__,
 | 
						|
		(unsigned long long)vpath_mask);
 | 
						|
 | 
						|
	/* Check how many vpaths are available */
 | 
						|
	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
		if (!((vpath_mask) & vxge_mBIT(i)))
 | 
						|
			continue;
 | 
						|
		max_vpath_supported++;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
 | 
						|
	if ((VXGE_HW_FUNCTION_MODE_SRIOV ==
 | 
						|
		ll_config.device_hw_info.function_mode) &&
 | 
						|
		(max_config_dev > 1) && (pdev->is_physfn)) {
 | 
						|
			ret = pci_enable_sriov(pdev, max_config_dev - 1);
 | 
						|
			if (ret)
 | 
						|
				vxge_debug_ll_config(VXGE_ERR,
 | 
						|
					"Failed to enable SRIOV: %d \n", ret);
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Configure vpaths and get driver configured number of vpaths
 | 
						|
	 * which is less than or equal to the maximum vpaths per function.
 | 
						|
	 */
 | 
						|
	no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config);
 | 
						|
	if (!no_of_vpath) {
 | 
						|
		vxge_debug_ll_config(VXGE_ERR,
 | 
						|
			"%s: No more vpaths to configure", VXGE_DRIVER_NAME);
 | 
						|
		ret = 0;
 | 
						|
		goto _exit3;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Setting driver callbacks */
 | 
						|
	attr.uld_callbacks.link_up = vxge_callback_link_up;
 | 
						|
	attr.uld_callbacks.link_down = vxge_callback_link_down;
 | 
						|
	attr.uld_callbacks.crit_err = vxge_callback_crit_err;
 | 
						|
 | 
						|
	status = vxge_hw_device_initialize(&hldev, &attr, device_config);
 | 
						|
	if (status != VXGE_HW_OK) {
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"Failed to initialize device (%d)", status);
 | 
						|
			ret = -EINVAL;
 | 
						|
			goto _exit3;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
 | 
						|
 | 
						|
	/* set private device info */
 | 
						|
	pci_set_drvdata(pdev, hldev);
 | 
						|
 | 
						|
	ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
 | 
						|
	ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
 | 
						|
	ll_config.addr_learn_en = addr_learn_en;
 | 
						|
	ll_config.rth_algorithm = RTH_ALG_JENKINS;
 | 
						|
	ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
 | 
						|
	ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
 | 
						|
	ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
 | 
						|
	ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
 | 
						|
	ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
 | 
						|
	ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
 | 
						|
	ll_config.rth_bkt_sz = RTH_BUCKET_SIZE;
 | 
						|
	ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
 | 
						|
	ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
 | 
						|
 | 
						|
	if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
 | 
						|
		&vdev)) {
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto _exit4;
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
 | 
						|
	VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
 | 
						|
		vxge_hw_device_trace_level_get(hldev));
 | 
						|
 | 
						|
	/* set private HW device info */
 | 
						|
	hldev->ndev = vdev->ndev;
 | 
						|
	vdev->mtu = VXGE_HW_DEFAULT_MTU;
 | 
						|
	vdev->bar0 = attr.bar0;
 | 
						|
	vdev->max_vpath_supported = max_vpath_supported;
 | 
						|
	vdev->no_of_vpath = no_of_vpath;
 | 
						|
 | 
						|
	/* Virtual Path count */
 | 
						|
	for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 | 
						|
		if (!vxge_bVALn(vpath_mask, i, 1))
 | 
						|
			continue;
 | 
						|
		if (j >= vdev->no_of_vpath)
 | 
						|
			break;
 | 
						|
 | 
						|
		vdev->vpaths[j].is_configured = 1;
 | 
						|
		vdev->vpaths[j].device_id = i;
 | 
						|
		vdev->vpaths[j].fifo.driver_id = j;
 | 
						|
		vdev->vpaths[j].ring.driver_id = j;
 | 
						|
		vdev->vpaths[j].vdev = vdev;
 | 
						|
		vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath;
 | 
						|
		memcpy((u8 *)vdev->vpaths[j].macaddr,
 | 
						|
				(u8 *)ll_config.device_hw_info.mac_addrs[i],
 | 
						|
				ETH_ALEN);
 | 
						|
 | 
						|
		/* Initialize the mac address list header */
 | 
						|
		INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list);
 | 
						|
 | 
						|
		vdev->vpaths[j].mac_addr_cnt = 0;
 | 
						|
		vdev->vpaths[j].mcast_addr_cnt = 0;
 | 
						|
		j++;
 | 
						|
	}
 | 
						|
	vdev->exec_mode = VXGE_EXEC_MODE_DISABLE;
 | 
						|
	vdev->max_config_port = max_config_port;
 | 
						|
 | 
						|
	vdev->vlan_tag_strip = vlan_tag_strip;
 | 
						|
 | 
						|
	/* map the hashing selector table to the configured vpaths */
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
		vdev->vpath_selector[i] = vpath_selector[i];
 | 
						|
 | 
						|
	macaddr = (u8 *)vdev->vpaths[0].macaddr;
 | 
						|
 | 
						|
	ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
 | 
						|
	ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
 | 
						|
	ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s",
 | 
						|
		vdev->ndev->name, ll_config.device_hw_info.serial_number);
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s",
 | 
						|
		vdev->ndev->name, ll_config.device_hw_info.part_number);
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
 | 
						|
		vdev->ndev->name, ll_config.device_hw_info.product_desc);
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE,
 | 
						|
		"%s: MAC ADDR: %02X:%02X:%02X:%02X:%02X:%02X",
 | 
						|
		vdev->ndev->name, macaddr[0], macaddr[1], macaddr[2],
 | 
						|
		macaddr[3], macaddr[4], macaddr[5]);
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d",
 | 
						|
		vdev->ndev->name, vxge_hw_device_link_width_get(hldev));
 | 
						|
 | 
						|
	vxge_debug_init(VXGE_TRACE,
 | 
						|
		"%s: Firmware version : %s Date : %s", vdev->ndev->name,
 | 
						|
		ll_config.device_hw_info.fw_version.version,
 | 
						|
		ll_config.device_hw_info.fw_date.date);
 | 
						|
 | 
						|
	if (new_device) {
 | 
						|
		switch (ll_config.device_hw_info.function_mode) {
 | 
						|
		case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
 | 
						|
			vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Single Function Mode Enabled", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
		case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
 | 
						|
			vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Multi Function Mode Enabled", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
		case VXGE_HW_FUNCTION_MODE_SRIOV:
 | 
						|
			vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Single Root IOV Mode Enabled", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
		case VXGE_HW_FUNCTION_MODE_MRIOV:
 | 
						|
			vxge_debug_init(VXGE_TRACE,
 | 
						|
			"%s: Multi Root IOV Mode Enabled", vdev->ndev->name);
 | 
						|
		break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	vxge_print_parm(vdev, vpath_mask);
 | 
						|
 | 
						|
	/* Store the fw version for ethttool option */
 | 
						|
	strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version);
 | 
						|
	memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN);
 | 
						|
	memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN);
 | 
						|
 | 
						|
	/* Copy the station mac address to the list */
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		entry =	(struct vxge_mac_addrs *)
 | 
						|
				kzalloc(sizeof(struct vxge_mac_addrs),
 | 
						|
					GFP_KERNEL);
 | 
						|
		if (NULL == entry) {
 | 
						|
			vxge_debug_init(VXGE_ERR,
 | 
						|
				"%s: mac_addr_list : memory allocation failed",
 | 
						|
				vdev->ndev->name);
 | 
						|
			ret = -EPERM;
 | 
						|
			goto _exit5;
 | 
						|
		}
 | 
						|
		macaddr = (u8 *)&entry->macaddr;
 | 
						|
		memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
 | 
						|
		list_add(&entry->item, &vdev->vpaths[i].mac_addr_list);
 | 
						|
		vdev->vpaths[i].mac_addr_cnt = 1;
 | 
						|
	}
 | 
						|
 | 
						|
	kfree(device_config);
 | 
						|
	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
 | 
						|
		vdev->ndev->name, __func__, __LINE__);
 | 
						|
 | 
						|
	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
 | 
						|
	VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
 | 
						|
		vxge_hw_device_trace_level_get(hldev));
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
_exit5:
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++)
 | 
						|
		vxge_free_mac_add_list(&vdev->vpaths[i]);
 | 
						|
 | 
						|
	vxge_device_unregister(hldev);
 | 
						|
_exit4:
 | 
						|
	pci_disable_sriov(pdev);
 | 
						|
	vxge_hw_device_terminate(hldev);
 | 
						|
_exit3:
 | 
						|
	iounmap(attr.bar0);
 | 
						|
_exit2:
 | 
						|
	pci_release_regions(pdev);
 | 
						|
_exit1:
 | 
						|
	pci_disable_device(pdev);
 | 
						|
_exit0:
 | 
						|
	kfree(device_config);
 | 
						|
	driver_config->config_dev_cnt--;
 | 
						|
	pci_set_drvdata(pdev, NULL);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * vxge_rem_nic - Free the PCI device
 | 
						|
 * @pdev: structure containing the PCI related information of the device.
 | 
						|
 * Description: This function is called by the Pci subsystem to release a
 | 
						|
 * PCI device and free up all resource held up by the device.
 | 
						|
 */
 | 
						|
static void __devexit
 | 
						|
vxge_remove(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	struct __vxge_hw_device  *hldev;
 | 
						|
	struct vxgedev *vdev = NULL;
 | 
						|
	struct net_device *dev;
 | 
						|
	int i = 0;
 | 
						|
#if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
 | 
						|
	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
 | 
						|
	u32 level_trace;
 | 
						|
#endif
 | 
						|
 | 
						|
	hldev = (struct __vxge_hw_device  *) pci_get_drvdata(pdev);
 | 
						|
 | 
						|
	if (hldev == NULL)
 | 
						|
		return;
 | 
						|
	dev = hldev->ndev;
 | 
						|
	vdev = netdev_priv(dev);
 | 
						|
 | 
						|
#if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
 | 
						|
	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
 | 
						|
	level_trace = vdev->level_trace;
 | 
						|
#endif
 | 
						|
	vxge_debug_entryexit(level_trace,
 | 
						|
		"%s:%d", __func__, __LINE__);
 | 
						|
 | 
						|
	vxge_debug_init(level_trace,
 | 
						|
		"%s : removing PCI device...", __func__);
 | 
						|
	vxge_device_unregister(hldev);
 | 
						|
 | 
						|
	for (i = 0; i < vdev->no_of_vpath; i++) {
 | 
						|
		vxge_free_mac_add_list(&vdev->vpaths[i]);
 | 
						|
		vdev->vpaths[i].mcast_addr_cnt = 0;
 | 
						|
		vdev->vpaths[i].mac_addr_cnt = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	kfree(vdev->vpaths);
 | 
						|
 | 
						|
	iounmap(vdev->bar0);
 | 
						|
 | 
						|
	pci_disable_sriov(pdev);
 | 
						|
 | 
						|
	/* we are safe to free it now */
 | 
						|
	free_netdev(dev);
 | 
						|
 | 
						|
	vxge_debug_init(level_trace,
 | 
						|
		"%s:%d  Device unregistered", __func__, __LINE__);
 | 
						|
 | 
						|
	vxge_hw_device_terminate(hldev);
 | 
						|
 | 
						|
	pci_disable_device(pdev);
 | 
						|
	pci_release_regions(pdev);
 | 
						|
	pci_set_drvdata(pdev, NULL);
 | 
						|
	vxge_debug_entryexit(level_trace,
 | 
						|
		"%s:%d  Exiting...", __func__, __LINE__);
 | 
						|
}
 | 
						|
 | 
						|
static struct pci_error_handlers vxge_err_handler = {
 | 
						|
	.error_detected = vxge_io_error_detected,
 | 
						|
	.slot_reset = vxge_io_slot_reset,
 | 
						|
	.resume = vxge_io_resume,
 | 
						|
};
 | 
						|
 | 
						|
static struct pci_driver vxge_driver = {
 | 
						|
	.name = VXGE_DRIVER_NAME,
 | 
						|
	.id_table = vxge_id_table,
 | 
						|
	.probe = vxge_probe,
 | 
						|
	.remove = __devexit_p(vxge_remove),
 | 
						|
#ifdef CONFIG_PM
 | 
						|
	.suspend = vxge_pm_suspend,
 | 
						|
	.resume = vxge_pm_resume,
 | 
						|
#endif
 | 
						|
	.err_handler = &vxge_err_handler,
 | 
						|
};
 | 
						|
 | 
						|
static int __init
 | 
						|
vxge_starter(void)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
	char version[32];
 | 
						|
	snprintf(version, 32, "%s", DRV_VERSION);
 | 
						|
 | 
						|
	printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n",
 | 
						|
		VXGE_DRIVER_NAME);
 | 
						|
	printk(KERN_CRIT "%s: Driver version: %s\n",
 | 
						|
			VXGE_DRIVER_NAME, version);
 | 
						|
 | 
						|
	verify_bandwidth();
 | 
						|
 | 
						|
	driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL);
 | 
						|
	if (!driver_config)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	ret = pci_register_driver(&vxge_driver);
 | 
						|
 | 
						|
	if (driver_config->config_dev_cnt &&
 | 
						|
	   (driver_config->config_dev_cnt != driver_config->total_dev_cnt))
 | 
						|
		vxge_debug_init(VXGE_ERR,
 | 
						|
			"%s: Configured %d of %d devices",
 | 
						|
			VXGE_DRIVER_NAME, driver_config->config_dev_cnt,
 | 
						|
			driver_config->total_dev_cnt);
 | 
						|
 | 
						|
	if (ret)
 | 
						|
		kfree(driver_config);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void __exit
 | 
						|
vxge_closer(void)
 | 
						|
{
 | 
						|
	pci_unregister_driver(&vxge_driver);
 | 
						|
	kfree(driver_config);
 | 
						|
}
 | 
						|
module_init(vxge_starter);
 | 
						|
module_exit(vxge_closer);
 |