283 lines
		
	
	
		
			6.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			283 lines
		
	
	
		
			6.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 *    pata_winbond.c - Winbond VLB ATA controllers
 | 
						|
 *	(C) 2006 Red Hat
 | 
						|
 *
 | 
						|
 *    Support for the Winbond 83759A when operating in advanced mode.
 | 
						|
 *    Multichip mode is not currently supported.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/blkdev.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <scsi/scsi_host.h>
 | 
						|
#include <linux/libata.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
 | 
						|
#define DRV_NAME "pata_winbond"
 | 
						|
#define DRV_VERSION "0.0.3"
 | 
						|
 | 
						|
#define NR_HOST 4	/* Two winbond controllers, two channels each */
 | 
						|
 | 
						|
struct winbond_data {
 | 
						|
	unsigned long config;
 | 
						|
	struct platform_device *platform_dev;
 | 
						|
};
 | 
						|
 | 
						|
static struct ata_host *winbond_host[NR_HOST];
 | 
						|
static struct winbond_data winbond_data[NR_HOST];
 | 
						|
static int nr_winbond_host;
 | 
						|
 | 
						|
#ifdef MODULE
 | 
						|
static int probe_winbond = 1;
 | 
						|
#else
 | 
						|
static int probe_winbond;
 | 
						|
#endif
 | 
						|
 | 
						|
static DEFINE_SPINLOCK(winbond_lock);
 | 
						|
 | 
						|
static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
 | 
						|
{
 | 
						|
	unsigned long flags;
 | 
						|
	spin_lock_irqsave(&winbond_lock, flags);
 | 
						|
	outb(reg, port + 0x01);
 | 
						|
	outb(val, port + 0x02);
 | 
						|
	spin_unlock_irqrestore(&winbond_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static u8 winbond_readcfg(unsigned long port, u8 reg)
 | 
						|
{
 | 
						|
	u8 val;
 | 
						|
 | 
						|
	unsigned long flags;
 | 
						|
	spin_lock_irqsave(&winbond_lock, flags);
 | 
						|
	outb(reg, port + 0x01);
 | 
						|
	val = inb(port + 0x02);
 | 
						|
	spin_unlock_irqrestore(&winbond_lock, flags);
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
 | 
						|
{
 | 
						|
	struct ata_timing t;
 | 
						|
	struct winbond_data *winbond = ap->host->private_data;
 | 
						|
	int active, recovery;
 | 
						|
	u8 reg;
 | 
						|
	int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
 | 
						|
 | 
						|
	reg = winbond_readcfg(winbond->config, 0x81);
 | 
						|
 | 
						|
	/* Get the timing data in cycles */
 | 
						|
	if (reg & 0x40)		/* Fast VLB bus, assume 50MHz */
 | 
						|
		ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
 | 
						|
	else
 | 
						|
		ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 | 
						|
 | 
						|
	active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
 | 
						|
	recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
 | 
						|
	timing = (active << 4) | recovery;
 | 
						|
	winbond_writecfg(winbond->config, timing, reg);
 | 
						|
 | 
						|
	/* Load the setup timing */
 | 
						|
 | 
						|
	reg = 0x35;
 | 
						|
	if (adev->class != ATA_DEV_ATA)
 | 
						|
		reg |= 0x08;	/* FIFO off */
 | 
						|
	if (!ata_pio_need_iordy(adev))
 | 
						|
		reg |= 0x02;	/* IORDY off */
 | 
						|
	reg |= (clamp_val(t.setup, 0, 3) << 6);
 | 
						|
	winbond_writecfg(winbond->config, timing + 1, reg);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static unsigned int winbond_data_xfer(struct ata_device *dev,
 | 
						|
			unsigned char *buf, unsigned int buflen, int rw)
 | 
						|
{
 | 
						|
	struct ata_port *ap = dev->link->ap;
 | 
						|
	int slop = buflen & 3;
 | 
						|
 | 
						|
	if (ata_id_has_dword_io(dev->id)) {
 | 
						|
		if (rw == READ)
 | 
						|
			ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 | 
						|
		else
 | 
						|
			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 | 
						|
 | 
						|
		if (unlikely(slop)) {
 | 
						|
			__le32 pad;
 | 
						|
			if (rw == READ) {
 | 
						|
				pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
 | 
						|
				memcpy(buf + buflen - slop, &pad, slop);
 | 
						|
			} else {
 | 
						|
				memcpy(&pad, buf + buflen - slop, slop);
 | 
						|
				iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
 | 
						|
			}
 | 
						|
			buflen += 4 - slop;
 | 
						|
		}
 | 
						|
	} else
 | 
						|
		buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
 | 
						|
 | 
						|
	return buflen;
 | 
						|
}
 | 
						|
 | 
						|
static struct scsi_host_template winbond_sht = {
 | 
						|
	ATA_PIO_SHT(DRV_NAME),
 | 
						|
};
 | 
						|
 | 
						|
static struct ata_port_operations winbond_port_ops = {
 | 
						|
	.inherits	= &ata_sff_port_ops,
 | 
						|
	.sff_data_xfer	= winbond_data_xfer,
 | 
						|
	.cable_detect	= ata_cable_40wire,
 | 
						|
	.set_piomode	= winbond_set_piomode,
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 *	winbond_init_one		-	attach a winbond interface
 | 
						|
 *	@type: Type to display
 | 
						|
 *	@io: I/O port start
 | 
						|
 *	@irq: interrupt line
 | 
						|
 *	@fast: True if on a > 33Mhz VLB
 | 
						|
 *
 | 
						|
 *	Register a VLB bus IDE interface. Such interfaces are PIO and we
 | 
						|
 *	assume do not support IRQ sharing.
 | 
						|
 */
 | 
						|
 | 
						|
static __init int winbond_init_one(unsigned long port)
 | 
						|
{
 | 
						|
	struct platform_device *pdev;
 | 
						|
	u8 reg;
 | 
						|
	int i, rc;
 | 
						|
 | 
						|
	reg = winbond_readcfg(port, 0x81);
 | 
						|
	reg |= 0x80;	/* jumpered mode off */
 | 
						|
	winbond_writecfg(port, 0x81, reg);
 | 
						|
	reg = winbond_readcfg(port, 0x83);
 | 
						|
	reg |= 0xF0;	/* local control */
 | 
						|
	winbond_writecfg(port, 0x83, reg);
 | 
						|
	reg = winbond_readcfg(port, 0x85);
 | 
						|
	reg |= 0xF0;	/* programmable timing */
 | 
						|
	winbond_writecfg(port, 0x85, reg);
 | 
						|
 | 
						|
	reg = winbond_readcfg(port, 0x81);
 | 
						|
 | 
						|
	if (!(reg & 0x03))		/* Disabled */
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	for (i = 0; i < 2 ; i ++) {
 | 
						|
		unsigned long cmd_port = 0x1F0 - (0x80 * i);
 | 
						|
		unsigned long ctl_port = cmd_port + 0x206;
 | 
						|
		struct ata_host *host;
 | 
						|
		struct ata_port *ap;
 | 
						|
		void __iomem *cmd_addr, *ctl_addr;
 | 
						|
 | 
						|
		if (!(reg & (1 << i)))
 | 
						|
			continue;
 | 
						|
 | 
						|
		pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
 | 
						|
		if (IS_ERR(pdev))
 | 
						|
			return PTR_ERR(pdev);
 | 
						|
 | 
						|
		rc = -ENOMEM;
 | 
						|
		host = ata_host_alloc(&pdev->dev, 1);
 | 
						|
		if (!host)
 | 
						|
			goto err_unregister;
 | 
						|
		ap = host->ports[0];
 | 
						|
 | 
						|
		rc = -ENOMEM;
 | 
						|
		cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
 | 
						|
		ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
 | 
						|
		if (!cmd_addr || !ctl_addr)
 | 
						|
			goto err_unregister;
 | 
						|
 | 
						|
		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
 | 
						|
 | 
						|
		ap->ops = &winbond_port_ops;
 | 
						|
		ap->pio_mask = ATA_PIO4;
 | 
						|
		ap->flags |= ATA_FLAG_SLAVE_POSS;
 | 
						|
		ap->ioaddr.cmd_addr = cmd_addr;
 | 
						|
		ap->ioaddr.altstatus_addr = ctl_addr;
 | 
						|
		ap->ioaddr.ctl_addr = ctl_addr;
 | 
						|
		ata_sff_std_ports(&ap->ioaddr);
 | 
						|
 | 
						|
		/* hook in a private data structure per channel */
 | 
						|
		host->private_data = &winbond_data[nr_winbond_host];
 | 
						|
		winbond_data[nr_winbond_host].config = port;
 | 
						|
		winbond_data[nr_winbond_host].platform_dev = pdev;
 | 
						|
 | 
						|
		/* activate */
 | 
						|
		rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
 | 
						|
				       &winbond_sht);
 | 
						|
		if (rc)
 | 
						|
			goto err_unregister;
 | 
						|
 | 
						|
		winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
 err_unregister:
 | 
						|
	platform_device_unregister(pdev);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *	winbond_init		-	attach winbond interfaces
 | 
						|
 *
 | 
						|
 *	Attach winbond IDE interfaces by scanning the ports it may occupy.
 | 
						|
 */
 | 
						|
 | 
						|
static __init int winbond_init(void)
 | 
						|
{
 | 
						|
	static const unsigned long config[2] = { 0x130, 0x1B0 };
 | 
						|
 | 
						|
	int ct = 0;
 | 
						|
	int i;
 | 
						|
 | 
						|
	if (probe_winbond == 0)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	/*
 | 
						|
 	 *	Check both base addresses
 | 
						|
	 */
 | 
						|
 | 
						|
	for (i = 0; i < 2; i++) {
 | 
						|
		if (probe_winbond & (1<<i)) {
 | 
						|
			int ret = 0;
 | 
						|
			unsigned long port = config[i];
 | 
						|
 | 
						|
			if (request_region(port, 2, "pata_winbond")) {
 | 
						|
				ret = winbond_init_one(port);
 | 
						|
				if (ret <= 0)
 | 
						|
					release_region(port, 2);
 | 
						|
				else ct+= ret;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
	if (ct != 0)
 | 
						|
		return 0;
 | 
						|
	return -ENODEV;
 | 
						|
}
 | 
						|
 | 
						|
static __exit void winbond_exit(void)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < nr_winbond_host; i++) {
 | 
						|
		ata_host_detach(winbond_host[i]);
 | 
						|
		release_region(winbond_data[i].config, 2);
 | 
						|
		platform_device_unregister(winbond_data[i].platform_dev);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
MODULE_AUTHOR("Alan Cox");
 | 
						|
MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_VERSION(DRV_VERSION);
 | 
						|
 | 
						|
module_init(winbond_init);
 | 
						|
module_exit(winbond_exit);
 | 
						|
 | 
						|
module_param(probe_winbond, int, 0);
 | 
						|
 |