676 lines
20 KiB
C
676 lines
20 KiB
C
/*
|
|
* sbus.c: UltraSparc SBUS controller support.
|
|
*
|
|
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/io.h>
|
|
#include <asm/upa.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/oplib.h>
|
|
#include <asm/starfire.h>
|
|
|
|
#include "iommu_common.h"
|
|
|
|
#define MAP_BASE ((u32)0xc0000000)
|
|
|
|
/* Offsets from iommu_regs */
|
|
#define SYSIO_IOMMUREG_BASE 0x2400UL
|
|
#define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */
|
|
#define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */
|
|
#define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */
|
|
#define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */
|
|
#define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */
|
|
#define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */
|
|
#define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */
|
|
#define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */
|
|
|
|
#define IOMMU_DRAM_VALID (1UL << 30UL)
|
|
|
|
/* Offsets from strbuf_regs */
|
|
#define SYSIO_STRBUFREG_BASE 0x2800UL
|
|
#define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */
|
|
#define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */
|
|
#define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */
|
|
#define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */
|
|
#define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */
|
|
#define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */
|
|
#define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */
|
|
|
|
#define STRBUF_TAG_VALID 0x02UL
|
|
|
|
/* Enable 64-bit DVMA mode for the given device. */
|
|
void sbus_set_sbus64(struct device *dev, int bursts)
|
|
{
|
|
struct iommu *iommu = dev->archdata.iommu;
|
|
struct of_device *op = to_of_device(dev);
|
|
const struct linux_prom_registers *regs;
|
|
unsigned long cfg_reg;
|
|
int slot;
|
|
u64 val;
|
|
|
|
regs = of_get_property(op->node, "reg", NULL);
|
|
if (!regs) {
|
|
printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %s\n",
|
|
op->node->full_name);
|
|
return;
|
|
}
|
|
slot = regs->which_io;
|
|
|
|
cfg_reg = iommu->write_complete_reg;
|
|
switch (slot) {
|
|
case 0:
|
|
cfg_reg += 0x20UL;
|
|
break;
|
|
case 1:
|
|
cfg_reg += 0x28UL;
|
|
break;
|
|
case 2:
|
|
cfg_reg += 0x30UL;
|
|
break;
|
|
case 3:
|
|
cfg_reg += 0x38UL;
|
|
break;
|
|
case 13:
|
|
cfg_reg += 0x40UL;
|
|
break;
|
|
case 14:
|
|
cfg_reg += 0x48UL;
|
|
break;
|
|
case 15:
|
|
cfg_reg += 0x50UL;
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
};
|
|
|
|
val = upa_readq(cfg_reg);
|
|
if (val & (1UL << 14UL)) {
|
|
/* Extended transfer mode already enabled. */
|
|
return;
|
|
}
|
|
|
|
val |= (1UL << 14UL);
|
|
|
|
if (bursts & DMA_BURST8)
|
|
val |= (1UL << 1UL);
|
|
if (bursts & DMA_BURST16)
|
|
val |= (1UL << 2UL);
|
|
if (bursts & DMA_BURST32)
|
|
val |= (1UL << 3UL);
|
|
if (bursts & DMA_BURST64)
|
|
val |= (1UL << 4UL);
|
|
upa_writeq(val, cfg_reg);
|
|
}
|
|
EXPORT_SYMBOL(sbus_set_sbus64);
|
|
|
|
/* INO number to IMAP register offset for SYSIO external IRQ's.
|
|
* This should conform to both Sunfire/Wildfire server and Fusion
|
|
* desktop designs.
|
|
*/
|
|
#define SYSIO_IMAP_SLOT0 0x2c00UL
|
|
#define SYSIO_IMAP_SLOT1 0x2c08UL
|
|
#define SYSIO_IMAP_SLOT2 0x2c10UL
|
|
#define SYSIO_IMAP_SLOT3 0x2c18UL
|
|
#define SYSIO_IMAP_SCSI 0x3000UL
|
|
#define SYSIO_IMAP_ETH 0x3008UL
|
|
#define SYSIO_IMAP_BPP 0x3010UL
|
|
#define SYSIO_IMAP_AUDIO 0x3018UL
|
|
#define SYSIO_IMAP_PFAIL 0x3020UL
|
|
#define SYSIO_IMAP_KMS 0x3028UL
|
|
#define SYSIO_IMAP_FLPY 0x3030UL
|
|
#define SYSIO_IMAP_SHW 0x3038UL
|
|
#define SYSIO_IMAP_KBD 0x3040UL
|
|
#define SYSIO_IMAP_MS 0x3048UL
|
|
#define SYSIO_IMAP_SER 0x3050UL
|
|
#define SYSIO_IMAP_TIM0 0x3060UL
|
|
#define SYSIO_IMAP_TIM1 0x3068UL
|
|
#define SYSIO_IMAP_UE 0x3070UL
|
|
#define SYSIO_IMAP_CE 0x3078UL
|
|
#define SYSIO_IMAP_SBERR 0x3080UL
|
|
#define SYSIO_IMAP_PMGMT 0x3088UL
|
|
#define SYSIO_IMAP_GFX 0x3090UL
|
|
#define SYSIO_IMAP_EUPA 0x3098UL
|
|
|
|
#define bogon ((unsigned long) -1)
|
|
static unsigned long sysio_irq_offsets[] = {
|
|
/* SBUS Slot 0 --> 3, level 1 --> 7 */
|
|
SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
|
|
SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
|
|
SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
|
|
SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
|
|
SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
|
|
SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
|
|
SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
|
|
SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
|
|
|
|
/* Onboard devices (not relevant/used on SunFire). */
|
|
SYSIO_IMAP_SCSI,
|
|
SYSIO_IMAP_ETH,
|
|
SYSIO_IMAP_BPP,
|
|
bogon,
|
|
SYSIO_IMAP_AUDIO,
|
|
SYSIO_IMAP_PFAIL,
|
|
bogon,
|
|
bogon,
|
|
SYSIO_IMAP_KMS,
|
|
SYSIO_IMAP_FLPY,
|
|
SYSIO_IMAP_SHW,
|
|
SYSIO_IMAP_KBD,
|
|
SYSIO_IMAP_MS,
|
|
SYSIO_IMAP_SER,
|
|
bogon,
|
|
bogon,
|
|
SYSIO_IMAP_TIM0,
|
|
SYSIO_IMAP_TIM1,
|
|
bogon,
|
|
bogon,
|
|
SYSIO_IMAP_UE,
|
|
SYSIO_IMAP_CE,
|
|
SYSIO_IMAP_SBERR,
|
|
SYSIO_IMAP_PMGMT,
|
|
};
|
|
|
|
#undef bogon
|
|
|
|
#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
|
|
|
|
/* Convert Interrupt Mapping register pointer to associated
|
|
* Interrupt Clear register pointer, SYSIO specific version.
|
|
*/
|
|
#define SYSIO_ICLR_UNUSED0 0x3400UL
|
|
#define SYSIO_ICLR_SLOT0 0x3408UL
|
|
#define SYSIO_ICLR_SLOT1 0x3448UL
|
|
#define SYSIO_ICLR_SLOT2 0x3488UL
|
|
#define SYSIO_ICLR_SLOT3 0x34c8UL
|
|
static unsigned long sysio_imap_to_iclr(unsigned long imap)
|
|
{
|
|
unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
|
|
return imap + diff;
|
|
}
|
|
|
|
static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino)
|
|
{
|
|
struct iommu *iommu = op->dev.archdata.iommu;
|
|
unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
|
|
unsigned long imap, iclr;
|
|
int sbus_level = 0;
|
|
|
|
imap = sysio_irq_offsets[ino];
|
|
if (imap == ((unsigned long)-1)) {
|
|
prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
|
|
ino);
|
|
prom_halt();
|
|
}
|
|
imap += reg_base;
|
|
|
|
/* SYSIO inconsistency. For external SLOTS, we have to select
|
|
* the right ICLR register based upon the lower SBUS irq level
|
|
* bits.
|
|
*/
|
|
if (ino >= 0x20) {
|
|
iclr = sysio_imap_to_iclr(imap);
|
|
} else {
|
|
int sbus_slot = (ino & 0x18)>>3;
|
|
|
|
sbus_level = ino & 0x7;
|
|
|
|
switch(sbus_slot) {
|
|
case 0:
|
|
iclr = reg_base + SYSIO_ICLR_SLOT0;
|
|
break;
|
|
case 1:
|
|
iclr = reg_base + SYSIO_ICLR_SLOT1;
|
|
break;
|
|
case 2:
|
|
iclr = reg_base + SYSIO_ICLR_SLOT2;
|
|
break;
|
|
default:
|
|
case 3:
|
|
iclr = reg_base + SYSIO_ICLR_SLOT3;
|
|
break;
|
|
};
|
|
|
|
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
|
|
}
|
|
return build_irq(sbus_level, iclr, imap);
|
|
}
|
|
|
|
/* Error interrupt handling. */
|
|
#define SYSIO_UE_AFSR 0x0030UL
|
|
#define SYSIO_UE_AFAR 0x0038UL
|
|
#define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
|
|
#define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
|
|
#define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
|
|
#define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
|
|
#define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
|
|
#define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
|
|
#define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */
|
|
#define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */
|
|
#define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
|
|
#define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
|
|
#define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
|
|
static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
|
|
{
|
|
struct of_device *op = dev_id;
|
|
struct iommu *iommu = op->dev.archdata.iommu;
|
|
unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
|
|
unsigned long afsr_reg, afar_reg;
|
|
unsigned long afsr, afar, error_bits;
|
|
int reported, portid;
|
|
|
|
afsr_reg = reg_base + SYSIO_UE_AFSR;
|
|
afar_reg = reg_base + SYSIO_UE_AFAR;
|
|
|
|
/* Latch error status. */
|
|
afsr = upa_readq(afsr_reg);
|
|
afar = upa_readq(afar_reg);
|
|
|
|
/* Clear primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR |
|
|
SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR);
|
|
upa_writeq(error_bits, afsr_reg);
|
|
|
|
portid = of_getintprop_default(op->node, "portid", -1);
|
|
|
|
/* Log the error. */
|
|
printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
|
|
portid,
|
|
(((error_bits & SYSIO_UEAFSR_PPIO) ?
|
|
"PIO" :
|
|
((error_bits & SYSIO_UEAFSR_PDRD) ?
|
|
"DVMA Read" :
|
|
((error_bits & SYSIO_UEAFSR_PDWR) ?
|
|
"DVMA Write" : "???")))));
|
|
printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n",
|
|
portid,
|
|
(afsr & SYSIO_UEAFSR_DOFF) >> 45UL,
|
|
(afsr & SYSIO_UEAFSR_SIZE) >> 42UL,
|
|
(afsr & SYSIO_UEAFSR_MID) >> 37UL);
|
|
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
|
|
printk("SYSIO[%x]: Secondary UE errors [", portid);
|
|
reported = 0;
|
|
if (afsr & SYSIO_UEAFSR_SPIO) {
|
|
reported++;
|
|
printk("(PIO)");
|
|
}
|
|
if (afsr & SYSIO_UEAFSR_SDRD) {
|
|
reported++;
|
|
printk("(DVMA Read)");
|
|
}
|
|
if (afsr & SYSIO_UEAFSR_SDWR) {
|
|
reported++;
|
|
printk("(DVMA Write)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define SYSIO_CE_AFSR 0x0040UL
|
|
#define SYSIO_CE_AFAR 0x0048UL
|
|
#define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
|
|
#define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
|
|
#define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
|
|
#define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */
|
|
#define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
|
|
#define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
|
|
#define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */
|
|
#define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */
|
|
#define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */
|
|
#define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
|
|
#define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
|
|
#define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
|
|
static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
|
|
{
|
|
struct of_device *op = dev_id;
|
|
struct iommu *iommu = op->dev.archdata.iommu;
|
|
unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
|
|
unsigned long afsr_reg, afar_reg;
|
|
unsigned long afsr, afar, error_bits;
|
|
int reported, portid;
|
|
|
|
afsr_reg = reg_base + SYSIO_CE_AFSR;
|
|
afar_reg = reg_base + SYSIO_CE_AFAR;
|
|
|
|
/* Latch error status. */
|
|
afsr = upa_readq(afsr_reg);
|
|
afar = upa_readq(afar_reg);
|
|
|
|
/* Clear primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR |
|
|
SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR);
|
|
upa_writeq(error_bits, afsr_reg);
|
|
|
|
portid = of_getintprop_default(op->node, "portid", -1);
|
|
|
|
printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
|
|
portid,
|
|
(((error_bits & SYSIO_CEAFSR_PPIO) ?
|
|
"PIO" :
|
|
((error_bits & SYSIO_CEAFSR_PDRD) ?
|
|
"DVMA Read" :
|
|
((error_bits & SYSIO_CEAFSR_PDWR) ?
|
|
"DVMA Write" : "???")))));
|
|
|
|
/* XXX Use syndrome and afar to print out module string just like
|
|
* XXX UDB CE trap handler does... -DaveM
|
|
*/
|
|
printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n",
|
|
portid,
|
|
(afsr & SYSIO_CEAFSR_DOFF) >> 45UL,
|
|
(afsr & SYSIO_CEAFSR_ESYND) >> 48UL,
|
|
(afsr & SYSIO_CEAFSR_SIZE) >> 42UL,
|
|
(afsr & SYSIO_CEAFSR_MID) >> 37UL);
|
|
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
|
|
|
|
printk("SYSIO[%x]: Secondary CE errors [", portid);
|
|
reported = 0;
|
|
if (afsr & SYSIO_CEAFSR_SPIO) {
|
|
reported++;
|
|
printk("(PIO)");
|
|
}
|
|
if (afsr & SYSIO_CEAFSR_SDRD) {
|
|
reported++;
|
|
printk("(DVMA Read)");
|
|
}
|
|
if (afsr & SYSIO_CEAFSR_SDWR) {
|
|
reported++;
|
|
printk("(DVMA Write)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define SYSIO_SBUS_AFSR 0x2010UL
|
|
#define SYSIO_SBUS_AFAR 0x2018UL
|
|
#define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */
|
|
#define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */
|
|
#define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */
|
|
#define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */
|
|
#define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */
|
|
#define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */
|
|
#define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */
|
|
#define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */
|
|
#define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */
|
|
#define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */
|
|
#define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */
|
|
#define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */
|
|
static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
|
|
{
|
|
struct of_device *op = dev_id;
|
|
struct iommu *iommu = op->dev.archdata.iommu;
|
|
unsigned long afsr_reg, afar_reg, reg_base;
|
|
unsigned long afsr, afar, error_bits;
|
|
int reported, portid;
|
|
|
|
reg_base = iommu->write_complete_reg - 0x2000UL;
|
|
afsr_reg = reg_base + SYSIO_SBUS_AFSR;
|
|
afar_reg = reg_base + SYSIO_SBUS_AFAR;
|
|
|
|
afsr = upa_readq(afsr_reg);
|
|
afar = upa_readq(afar_reg);
|
|
|
|
/* Clear primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR |
|
|
SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR);
|
|
upa_writeq(error_bits, afsr_reg);
|
|
|
|
portid = of_getintprop_default(op->node, "portid", -1);
|
|
|
|
/* Log the error. */
|
|
printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
|
|
portid,
|
|
(((error_bits & SYSIO_SBAFSR_PLE) ?
|
|
"Late PIO Error" :
|
|
((error_bits & SYSIO_SBAFSR_PTO) ?
|
|
"Time Out" :
|
|
((error_bits & SYSIO_SBAFSR_PBERR) ?
|
|
"Error Ack" : "???")))),
|
|
(afsr & SYSIO_SBAFSR_RD) ? 1 : 0);
|
|
printk("SYSIO[%x]: size[%lx] MID[%lx]\n",
|
|
portid,
|
|
(afsr & SYSIO_SBAFSR_SIZE) >> 42UL,
|
|
(afsr & SYSIO_SBAFSR_MID) >> 37UL);
|
|
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
|
|
printk("SYSIO[%x]: Secondary SBUS errors [", portid);
|
|
reported = 0;
|
|
if (afsr & SYSIO_SBAFSR_SLE) {
|
|
reported++;
|
|
printk("(Late PIO Error)");
|
|
}
|
|
if (afsr & SYSIO_SBAFSR_STO) {
|
|
reported++;
|
|
printk("(Time Out)");
|
|
}
|
|
if (afsr & SYSIO_SBAFSR_SBERR) {
|
|
reported++;
|
|
printk("(Error Ack)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
/* XXX check iommu/strbuf for further error status XXX */
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define ECC_CONTROL 0x0020UL
|
|
#define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */
|
|
#define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */
|
|
#define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */
|
|
|
|
#define SYSIO_UE_INO 0x34
|
|
#define SYSIO_CE_INO 0x35
|
|
#define SYSIO_SBUSERR_INO 0x36
|
|
|
|
static void __init sysio_register_error_handlers(struct of_device *op)
|
|
{
|
|
struct iommu *iommu = op->dev.archdata.iommu;
|
|
unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
|
|
unsigned int irq;
|
|
u64 control;
|
|
int portid;
|
|
|
|
portid = of_getintprop_default(op->node, "portid", -1);
|
|
|
|
irq = sbus_build_irq(op, SYSIO_UE_INO);
|
|
if (request_irq(irq, sysio_ue_handler, 0,
|
|
"SYSIO_UE", op) < 0) {
|
|
prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n",
|
|
portid);
|
|
prom_halt();
|
|
}
|
|
|
|
irq = sbus_build_irq(op, SYSIO_CE_INO);
|
|
if (request_irq(irq, sysio_ce_handler, 0,
|
|
"SYSIO_CE", op) < 0) {
|
|
prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n",
|
|
portid);
|
|
prom_halt();
|
|
}
|
|
|
|
irq = sbus_build_irq(op, SYSIO_SBUSERR_INO);
|
|
if (request_irq(irq, sysio_sbus_error_handler, 0,
|
|
"SYSIO_SBERR", op) < 0) {
|
|
prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n",
|
|
portid);
|
|
prom_halt();
|
|
}
|
|
|
|
/* Now turn the error interrupts on and also enable ECC checking. */
|
|
upa_writeq((SYSIO_ECNTRL_ECCEN |
|
|
SYSIO_ECNTRL_UEEN |
|
|
SYSIO_ECNTRL_CEEN),
|
|
reg_base + ECC_CONTROL);
|
|
|
|
control = upa_readq(iommu->write_complete_reg);
|
|
control |= 0x100UL; /* SBUS Error Interrupt Enable */
|
|
upa_writeq(control, iommu->write_complete_reg);
|
|
}
|
|
|
|
/* Boot time initialization. */
|
|
static void __init sbus_iommu_init(struct of_device *op)
|
|
{
|
|
const struct linux_prom64_registers *pr;
|
|
struct device_node *dp = op->node;
|
|
struct iommu *iommu;
|
|
struct strbuf *strbuf;
|
|
unsigned long regs, reg_base;
|
|
int i, portid;
|
|
u64 control;
|
|
|
|
pr = of_get_property(dp, "reg", NULL);
|
|
if (!pr) {
|
|
prom_printf("sbus_iommu_init: Cannot map SYSIO "
|
|
"control registers.\n");
|
|
prom_halt();
|
|
}
|
|
regs = pr->phys_addr;
|
|
|
|
iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC);
|
|
if (!iommu)
|
|
goto fatal_memory_error;
|
|
strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC);
|
|
if (!strbuf)
|
|
goto fatal_memory_error;
|
|
|
|
op->dev.archdata.iommu = iommu;
|
|
op->dev.archdata.stc = strbuf;
|
|
op->dev.archdata.numa_node = -1;
|
|
|
|
reg_base = regs + SYSIO_IOMMUREG_BASE;
|
|
iommu->iommu_control = reg_base + IOMMU_CONTROL;
|
|
iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE;
|
|
iommu->iommu_flush = reg_base + IOMMU_FLUSH;
|
|
iommu->iommu_tags = iommu->iommu_control +
|
|
(IOMMU_TAGDIAG - IOMMU_CONTROL);
|
|
|
|
reg_base = regs + SYSIO_STRBUFREG_BASE;
|
|
strbuf->strbuf_control = reg_base + STRBUF_CONTROL;
|
|
strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH;
|
|
strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC;
|
|
|
|
strbuf->strbuf_enabled = 1;
|
|
|
|
strbuf->strbuf_flushflag = (volatile unsigned long *)
|
|
((((unsigned long)&strbuf->__flushflag_buf[0])
|
|
+ 63UL)
|
|
& ~63UL);
|
|
strbuf->strbuf_flushflag_pa = (unsigned long)
|
|
__pa(strbuf->strbuf_flushflag);
|
|
|
|
/* The SYSIO SBUS control register is used for dummy reads
|
|
* in order to ensure write completion.
|
|
*/
|
|
iommu->write_complete_reg = regs + 0x2000UL;
|
|
|
|
portid = of_getintprop_default(op->node, "portid", -1);
|
|
printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n",
|
|
portid, regs);
|
|
|
|
/* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
|
|
if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1))
|
|
goto fatal_memory_error;
|
|
|
|
control = upa_readq(iommu->iommu_control);
|
|
control = ((7UL << 16UL) |
|
|
(0UL << 2UL) |
|
|
(1UL << 1UL) |
|
|
(1UL << 0UL));
|
|
upa_writeq(control, iommu->iommu_control);
|
|
|
|
/* Clean out any cruft in the IOMMU using
|
|
* diagnostic accesses.
|
|
*/
|
|
for (i = 0; i < 16; i++) {
|
|
unsigned long dram, tag;
|
|
|
|
dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL);
|
|
tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL);
|
|
|
|
dram += (unsigned long)i * 8UL;
|
|
tag += (unsigned long)i * 8UL;
|
|
upa_writeq(0, dram);
|
|
upa_writeq(0, tag);
|
|
}
|
|
upa_readq(iommu->write_complete_reg);
|
|
|
|
/* Give the TSB to SYSIO. */
|
|
upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase);
|
|
|
|
/* Setup streaming buffer, DE=1 SB_EN=1 */
|
|
control = (1UL << 1UL) | (1UL << 0UL);
|
|
upa_writeq(control, strbuf->strbuf_control);
|
|
|
|
/* Clear out the tags using diagnostics. */
|
|
for (i = 0; i < 16; i++) {
|
|
unsigned long ptag, ltag;
|
|
|
|
ptag = strbuf->strbuf_control +
|
|
(STRBUF_PTAGDIAG - STRBUF_CONTROL);
|
|
ltag = strbuf->strbuf_control +
|
|
(STRBUF_LTAGDIAG - STRBUF_CONTROL);
|
|
ptag += (unsigned long)i * 8UL;
|
|
ltag += (unsigned long)i * 8UL;
|
|
|
|
upa_writeq(0UL, ptag);
|
|
upa_writeq(0UL, ltag);
|
|
}
|
|
|
|
/* Enable DVMA arbitration for all devices/slots. */
|
|
control = upa_readq(iommu->write_complete_reg);
|
|
control |= 0x3fUL;
|
|
upa_writeq(control, iommu->write_complete_reg);
|
|
|
|
/* Now some Xfire specific grot... */
|
|
if (this_is_starfire)
|
|
starfire_hookup(portid);
|
|
|
|
sysio_register_error_handlers(op);
|
|
return;
|
|
|
|
fatal_memory_error:
|
|
prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
|
|
}
|
|
|
|
static int __init sbus_init(void)
|
|
{
|
|
struct device_node *dp;
|
|
|
|
for_each_node_by_name(dp, "sbus") {
|
|
struct of_device *op = of_find_device_by_node(dp);
|
|
|
|
sbus_iommu_init(op);
|
|
of_propagate_archdata(op);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(sbus_init);
|