616 lines
15 KiB
C
616 lines
15 KiB
C
/*
|
|
* GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200
|
|
*
|
|
* Copyright (c) 2009 Manuel Lauss.
|
|
*
|
|
* Licensed under the terms outlined in the file COPYING.
|
|
*/
|
|
|
|
#ifndef _ALCHEMY_GPIO_AU1000_H_
|
|
#define _ALCHEMY_GPIO_AU1000_H_
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
|
|
/* The default GPIO numberspace as documented in the Alchemy manuals.
|
|
* GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block.
|
|
*/
|
|
#define ALCHEMY_GPIO1_BASE 0
|
|
#define ALCHEMY_GPIO2_BASE 200
|
|
|
|
#define ALCHEMY_GPIO1_NUM 32
|
|
#define ALCHEMY_GPIO2_NUM 16
|
|
#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
|
|
#define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)
|
|
|
|
#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off))
|
|
|
|
|
|
static inline int au1000_gpio1_to_irq(int gpio)
|
|
{
|
|
return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
|
|
}
|
|
|
|
static inline int au1000_gpio2_to_irq(int gpio)
|
|
{
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_AU1000
|
|
static inline int au1000_irq_to_gpio(int irq)
|
|
{
|
|
if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31))
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
|
|
|
|
return -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
static inline int au1500_gpio1_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO1_BASE;
|
|
|
|
switch (gpio) {
|
|
case 0 ... 15:
|
|
case 20:
|
|
case 23 ... 28: return MAKE_IRQ(1, gpio);
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static inline int au1500_gpio2_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO2_BASE;
|
|
|
|
switch (gpio) {
|
|
case 0 ... 3: return MAKE_IRQ(1, 16 + gpio - 0);
|
|
case 4 ... 5: return MAKE_IRQ(1, 21 + gpio - 4);
|
|
case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6);
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_AU1500
|
|
static inline int au1500_irq_to_gpio(int irq)
|
|
{
|
|
switch (irq) {
|
|
case AU1000_GPIO_0 ... AU1000_GPIO_15:
|
|
case AU1500_GPIO_20:
|
|
case AU1500_GPIO_23 ... AU1500_GPIO_28:
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
|
|
case AU1500_GPIO_200 ... AU1500_GPIO_203:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0;
|
|
case AU1500_GPIO_204 ... AU1500_GPIO_205:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4;
|
|
case AU1500_GPIO_206 ... AU1500_GPIO_207:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
|
|
case AU1500_GPIO_208_215:
|
|
return ALCHEMY_GPIO2_BASE + 8;
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
static inline int au1100_gpio1_to_irq(int gpio)
|
|
{
|
|
return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
|
|
}
|
|
|
|
static inline int au1100_gpio2_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO2_BASE;
|
|
|
|
if ((gpio >= 8) && (gpio <= 15))
|
|
return MAKE_IRQ(0, 29); /* shared GPIO208_215 */
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_AU1100
|
|
static inline int au1100_irq_to_gpio(int irq)
|
|
{
|
|
switch (irq) {
|
|
case AU1000_GPIO_0 ... AU1000_GPIO_31:
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
|
|
case AU1100_GPIO_208_215:
|
|
return ALCHEMY_GPIO2_BASE + 8;
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
static inline int au1550_gpio1_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO1_BASE;
|
|
|
|
switch (gpio) {
|
|
case 0 ... 15:
|
|
case 20 ... 28: return MAKE_IRQ(1, gpio);
|
|
case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16);
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static inline int au1550_gpio2_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO2_BASE;
|
|
|
|
switch (gpio) {
|
|
case 0: return MAKE_IRQ(1, 16);
|
|
case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */
|
|
case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6);
|
|
case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_AU1550
|
|
static inline int au1550_irq_to_gpio(int irq)
|
|
{
|
|
switch (irq) {
|
|
case AU1000_GPIO_0 ... AU1000_GPIO_15:
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
|
|
case AU1550_GPIO_200:
|
|
case AU1500_GPIO_201_205:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0;
|
|
case AU1500_GPIO_16 ... AU1500_GPIO_28:
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16;
|
|
case AU1500_GPIO_206 ... AU1500_GPIO_208_218:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
static inline int au1200_gpio1_to_irq(int gpio)
|
|
{
|
|
return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
|
|
}
|
|
|
|
static inline int au1200_gpio2_to_irq(int gpio)
|
|
{
|
|
gpio -= ALCHEMY_GPIO2_BASE;
|
|
|
|
switch (gpio) {
|
|
case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0);
|
|
case 3: return MAKE_IRQ(0, 22);
|
|
case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4);
|
|
case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_AU1200
|
|
static inline int au1200_irq_to_gpio(int irq)
|
|
{
|
|
switch (irq) {
|
|
case AU1000_GPIO_0 ... AU1000_GPIO_31:
|
|
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
|
|
case AU1200_GPIO_200 ... AU1200_GPIO_202:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0;
|
|
case AU1200_GPIO_203:
|
|
return ALCHEMY_GPIO2_BASE + 3;
|
|
case AU1200_GPIO_204 ... AU1200_GPIO_208_215:
|
|
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4;
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* GPIO1 block macros for common linux gpio functions.
|
|
*/
|
|
static inline void alchemy_gpio1_set_value(int gpio, int v)
|
|
{
|
|
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
|
|
unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
|
|
au_writel(mask, r);
|
|
au_sync();
|
|
}
|
|
|
|
static inline int alchemy_gpio1_get_value(int gpio)
|
|
{
|
|
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
|
|
return au_readl(SYS_PINSTATERD) & mask;
|
|
}
|
|
|
|
static inline int alchemy_gpio1_direction_input(int gpio)
|
|
{
|
|
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
|
|
au_writel(mask, SYS_TRIOUTCLR);
|
|
au_sync();
|
|
return 0;
|
|
}
|
|
|
|
static inline int alchemy_gpio1_direction_output(int gpio, int v)
|
|
{
|
|
/* hardware switches to "output" mode when one of the two
|
|
* "set_value" registers is accessed.
|
|
*/
|
|
alchemy_gpio1_set_value(gpio, v);
|
|
return 0;
|
|
}
|
|
|
|
static inline int alchemy_gpio1_is_valid(int gpio)
|
|
{
|
|
return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX));
|
|
}
|
|
|
|
static inline int alchemy_gpio1_to_irq(int gpio)
|
|
{
|
|
#if defined(CONFIG_SOC_AU1000)
|
|
return au1000_gpio1_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1100)
|
|
return au1100_gpio1_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1500)
|
|
return au1500_gpio1_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1550)
|
|
return au1550_gpio1_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1200)
|
|
return au1200_gpio1_to_irq(gpio);
|
|
#else
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* GPIO2 block macros for common linux GPIO functions. The 'gpio'
|
|
* parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
|
|
*/
|
|
static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
|
|
{
|
|
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
|
|
unsigned long d = au_readl(GPIO2_DIR);
|
|
if (to_out)
|
|
d |= mask;
|
|
else
|
|
d &= ~mask;
|
|
au_writel(d, GPIO2_DIR);
|
|
au_sync();
|
|
}
|
|
|
|
static inline void alchemy_gpio2_set_value(int gpio, int v)
|
|
{
|
|
unsigned long mask;
|
|
mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
|
|
au_writel(mask, GPIO2_OUTPUT);
|
|
au_sync();
|
|
}
|
|
|
|
static inline int alchemy_gpio2_get_value(int gpio)
|
|
{
|
|
return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
|
|
}
|
|
|
|
static inline int alchemy_gpio2_direction_input(int gpio)
|
|
{
|
|
unsigned long flags;
|
|
local_irq_save(flags);
|
|
__alchemy_gpio2_mod_dir(gpio, 0);
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
static inline int alchemy_gpio2_direction_output(int gpio, int v)
|
|
{
|
|
unsigned long flags;
|
|
alchemy_gpio2_set_value(gpio, v);
|
|
local_irq_save(flags);
|
|
__alchemy_gpio2_mod_dir(gpio, 1);
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
static inline int alchemy_gpio2_is_valid(int gpio)
|
|
{
|
|
return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX));
|
|
}
|
|
|
|
static inline int alchemy_gpio2_to_irq(int gpio)
|
|
{
|
|
#if defined(CONFIG_SOC_AU1000)
|
|
return au1000_gpio2_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1100)
|
|
return au1100_gpio2_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1500)
|
|
return au1500_gpio2_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1550)
|
|
return au1550_gpio2_to_irq(gpio);
|
|
#elif defined(CONFIG_SOC_AU1200)
|
|
return au1200_gpio2_to_irq(gpio);
|
|
#else
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
/**********************************************************************/
|
|
|
|
/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
|
|
* SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this
|
|
* register enables use of GPIOs as wake source.
|
|
*/
|
|
static inline void alchemy_gpio1_input_enable(void)
|
|
{
|
|
au_writel(0, SYS_PININPUTEN); /* the write op is key */
|
|
au_sync();
|
|
}
|
|
|
|
/* GPIO2 shared interrupts and control */
|
|
|
|
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
|
|
{
|
|
unsigned long r = au_readl(GPIO2_INTENABLE);
|
|
if (en)
|
|
r |= 1 << gpio2;
|
|
else
|
|
r &= ~(1 << gpio2);
|
|
au_writel(r, GPIO2_INTENABLE);
|
|
au_sync();
|
|
}
|
|
|
|
/**
|
|
* alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
|
|
* @gpio2: The GPIO2 pin to activate (200...215).
|
|
*
|
|
* GPIO208-215 have one shared interrupt line to the INTC. They are
|
|
* and'ed with a per-pin enable bit and finally or'ed together to form
|
|
* a single irq request (useful for active-high sources).
|
|
* With this function, a pins' individual contribution to the int request
|
|
* can be enabled. As with all other GPIO-based interrupts, the INTC
|
|
* must be programmed to accept the GPIO208_215 interrupt as well.
|
|
*
|
|
* NOTE: Calling this macro is only necessary for GPIO208-215; all other
|
|
* GPIO2-based interrupts have their own request to the INTC. Please
|
|
* consult your Alchemy databook for more information!
|
|
*
|
|
* NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request
|
|
* line to the INTC, GPIO201_205. This function can be used for those
|
|
* as well.
|
|
*
|
|
* NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace
|
|
* (200-215 by default). No sanity checks are made,
|
|
*/
|
|
static inline void alchemy_gpio2_enable_int(int gpio2)
|
|
{
|
|
unsigned long flags;
|
|
|
|
gpio2 -= ALCHEMY_GPIO2_BASE;
|
|
|
|
#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
|
|
/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
|
|
gpio2 -= 8;
|
|
#endif
|
|
local_irq_save(flags);
|
|
__alchemy_gpio2_mod_int(gpio2, 1);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution.
|
|
* @gpio2: The GPIO2 pin to activate (200...215).
|
|
*
|
|
* see function alchemy_gpio2_enable_int() for more information.
|
|
*/
|
|
static inline void alchemy_gpio2_disable_int(int gpio2)
|
|
{
|
|
unsigned long flags;
|
|
|
|
gpio2 -= ALCHEMY_GPIO2_BASE;
|
|
|
|
#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
|
|
/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
|
|
gpio2 -= 8;
|
|
#endif
|
|
local_irq_save(flags);
|
|
__alchemy_gpio2_mod_int(gpio2, 0);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* alchemy_gpio2_enable - Activate GPIO2 block.
|
|
*
|
|
* The GPIO2 block must be enabled excplicitly to work. On systems
|
|
* where this isn't done by the bootloader, this macro can be used.
|
|
*/
|
|
static inline void alchemy_gpio2_enable(void)
|
|
{
|
|
au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */
|
|
au_sync();
|
|
au_writel(1, GPIO2_ENABLE); /* clock enabled */
|
|
au_sync();
|
|
}
|
|
|
|
/**
|
|
* alchemy_gpio2_disable - disable GPIO2 block.
|
|
*
|
|
* Disable and put GPIO2 block in low-power mode.
|
|
*/
|
|
static inline void alchemy_gpio2_disable(void)
|
|
{
|
|
au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */
|
|
au_sync();
|
|
}
|
|
|
|
/**********************************************************************/
|
|
|
|
/* wrappers for on-chip gpios; can be used before gpio chips have been
|
|
* registered with gpiolib.
|
|
*/
|
|
static inline int alchemy_gpio_direction_input(int gpio)
|
|
{
|
|
return (gpio >= ALCHEMY_GPIO2_BASE) ?
|
|
alchemy_gpio2_direction_input(gpio) :
|
|
alchemy_gpio1_direction_input(gpio);
|
|
}
|
|
|
|
static inline int alchemy_gpio_direction_output(int gpio, int v)
|
|
{
|
|
return (gpio >= ALCHEMY_GPIO2_BASE) ?
|
|
alchemy_gpio2_direction_output(gpio, v) :
|
|
alchemy_gpio1_direction_output(gpio, v);
|
|
}
|
|
|
|
static inline int alchemy_gpio_get_value(int gpio)
|
|
{
|
|
return (gpio >= ALCHEMY_GPIO2_BASE) ?
|
|
alchemy_gpio2_get_value(gpio) :
|
|
alchemy_gpio1_get_value(gpio);
|
|
}
|
|
|
|
static inline void alchemy_gpio_set_value(int gpio, int v)
|
|
{
|
|
if (gpio >= ALCHEMY_GPIO2_BASE)
|
|
alchemy_gpio2_set_value(gpio, v);
|
|
else
|
|
alchemy_gpio1_set_value(gpio, v);
|
|
}
|
|
|
|
static inline int alchemy_gpio_is_valid(int gpio)
|
|
{
|
|
return (gpio >= ALCHEMY_GPIO2_BASE) ?
|
|
alchemy_gpio2_is_valid(gpio) :
|
|
alchemy_gpio1_is_valid(gpio);
|
|
}
|
|
|
|
static inline int alchemy_gpio_cansleep(int gpio)
|
|
{
|
|
return 0; /* Alchemy never gets tired */
|
|
}
|
|
|
|
static inline int alchemy_gpio_to_irq(int gpio)
|
|
{
|
|
return (gpio >= ALCHEMY_GPIO2_BASE) ?
|
|
alchemy_gpio2_to_irq(gpio) :
|
|
alchemy_gpio1_to_irq(gpio);
|
|
}
|
|
|
|
static inline int alchemy_irq_to_gpio(int irq)
|
|
{
|
|
#if defined(CONFIG_SOC_AU1000)
|
|
return au1000_irq_to_gpio(irq);
|
|
#elif defined(CONFIG_SOC_AU1100)
|
|
return au1100_irq_to_gpio(irq);
|
|
#elif defined(CONFIG_SOC_AU1500)
|
|
return au1500_irq_to_gpio(irq);
|
|
#elif defined(CONFIG_SOC_AU1550)
|
|
return au1550_irq_to_gpio(irq);
|
|
#elif defined(CONFIG_SOC_AU1200)
|
|
return au1200_irq_to_gpio(irq);
|
|
#else
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
/**********************************************************************/
|
|
|
|
/* Linux gpio framework integration.
|
|
*
|
|
* 4 use cases of Au1000-Au1200 GPIOS:
|
|
*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
|
|
* Board must register gpiochips.
|
|
*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
|
|
* 2 (1 for Au1000) gpio_chips are registered.
|
|
*
|
|
*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
|
|
* the boards' gpio.h must provide the linux gpio wrapper functions,
|
|
*
|
|
*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
|
|
* inlinable gpio functions are provided which enable access to the
|
|
* Au1000 gpios only by using the numbers straight out of the data-
|
|
* sheets.
|
|
|
|
* Cases 1 and 3 are intended for boards which want to provide their own
|
|
* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
|
|
* which are in part provided by spare Au1000 GPIO pins and in part by
|
|
* an external FPGA but you still want them to be accssible in linux
|
|
* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
|
|
* as required).
|
|
*/
|
|
|
|
#ifndef CONFIG_GPIOLIB
|
|
|
|
|
|
#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
|
|
|
|
static inline int gpio_direction_input(int gpio)
|
|
{
|
|
return alchemy_gpio_direction_input(gpio);
|
|
}
|
|
|
|
static inline int gpio_direction_output(int gpio, int v)
|
|
{
|
|
return alchemy_gpio_direction_output(gpio, v);
|
|
}
|
|
|
|
static inline int gpio_get_value(int gpio)
|
|
{
|
|
return alchemy_gpio_get_value(gpio);
|
|
}
|
|
|
|
static inline void gpio_set_value(int gpio, int v)
|
|
{
|
|
alchemy_gpio_set_value(gpio, v);
|
|
}
|
|
|
|
static inline int gpio_is_valid(int gpio)
|
|
{
|
|
return alchemy_gpio_is_valid(gpio);
|
|
}
|
|
|
|
static inline int gpio_cansleep(int gpio)
|
|
{
|
|
return alchemy_gpio_cansleep(gpio);
|
|
}
|
|
|
|
static inline int gpio_to_irq(int gpio)
|
|
{
|
|
return alchemy_gpio_to_irq(gpio);
|
|
}
|
|
|
|
static inline int irq_to_gpio(int irq)
|
|
{
|
|
return alchemy_irq_to_gpio(irq);
|
|
}
|
|
|
|
static inline int gpio_request(unsigned gpio, const char *label)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void gpio_free(unsigned gpio)
|
|
{
|
|
}
|
|
|
|
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
|
|
|
|
|
|
#else /* CONFIG GPIOLIB */
|
|
|
|
|
|
/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
|
|
#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
|
|
|
|
/* get everything through gpiolib */
|
|
#define gpio_to_irq __gpio_to_irq
|
|
#define gpio_get_value __gpio_get_value
|
|
#define gpio_set_value __gpio_set_value
|
|
#define gpio_cansleep __gpio_cansleep
|
|
#define irq_to_gpio alchemy_irq_to_gpio
|
|
|
|
#include <asm-generic/gpio.h>
|
|
|
|
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
|
|
|
|
|
|
#endif /* !CONFIG_GPIOLIB */
|
|
|
|
#endif /* _ALCHEMY_GPIO_AU1000_H_ */
|