android_kernel_cmhtcleo/Documentation/powerpc/dts-bindings/fsl/sec.txt
2010-08-27 11:19:57 +02:00

69 lines
2.7 KiB
Plaintext

Freescale SoC SEC Security Engines
Required properties:
- compatible : Should contain entries for this and backward compatible
SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0"
- reg : Offset and length of the register set for the device
- interrupts : the SEC's interrupt number
- fsl,num-channels : An integer representing the number of channels
available.
- fsl,channel-fifo-len : An integer representing the number of
descriptor pointers each channel fetch fifo can hold.
- fsl,exec-units-mask : The bitmask representing what execution units
(EUs) are available. It's a single 32-bit cell. EU information
should be encoded following the SEC's Descriptor Header Dword
EU_SEL0 field documentation, i.e. as follows:
bit 0 = reserved - should be 0
bit 1 = set if SEC has the ARC4 EU (AFEU)
bit 2 = set if SEC has the DES/3DES EU (DEU)
bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A)
bit 4 = set if SEC has the random number generator EU (RNG)
bit 5 = set if SEC has the public key EU (PKEU)
bit 6 = set if SEC has the AES EU (AESU)
bit 7 = set if SEC has the Kasumi EU (KEU)
bit 8 = set if SEC has the CRC EU (CRCU)
bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
remaining bits are reserved for future SEC EUs.
- fsl,descriptor-types-mask : The bitmask representing what descriptors
are available. It's a single 32-bit cell. Descriptor type information
should be encoded following the SEC's Descriptor Header Dword DESC_TYPE
field documentation, i.e. as follows:
bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type
bit 1 = set if SEC supports the ipsec_esp descriptor type
bit 2 = set if SEC supports the common_nonsnoop desc. type
bit 3 = set if SEC supports the 802.11i AES ccmp desc. type
bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type
bit 5 = set if SEC supports the srtp descriptor type
bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type
bit 7 = set if SEC supports the pkeu_assemble descriptor type
bit 8 = set if SEC supports the aesu_key_expand_output desc.type
bit 9 = set if SEC supports the pkeu_ptmul descriptor type
bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
..and so on and so forth.
Optional properties:
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Example:
/* MPC8548E */
crypto@30000 {
compatible = "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <29 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
};