android/android_kernel_cmhtcleo
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Files
0321ede21fa674f0ce35d2ff52ae48a314d747ac
android_kernel_cmhtcleo/arch/arm/plat-omap/include/mach/mux.h
Markinus e34adb00cb Add EVOs source as default
2010-08-27 11:19:57 +02:00

915 lines
19 KiB
C
Raw Blame History

/*
* arch/arm/plat-omap/include/mach/mux.h
*
* Table of the Omap register configurations for the FUNC_MUX and
* PULL_DWN combinations.
*
* Copyright (C) 2004 - 2008 Texas Instruments Inc.
* Copyright (C) 2003 - 2008 Nokia Corporation
*
* Written by Tony Lindgren
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* NOTE: Please use the following naming style for new pin entries.
* For example, W8_1610_MMC2_DAT0, where:
* - W8 = ball
* - 1610 = 1510 or 1610, none if common for both 1510 and 1610
* - MMC2_DAT0 = function
*/
#ifndef __ASM_ARCH_MUX_H
#define __ASM_ARCH_MUX_H
#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
#ifdef CONFIG_OMAP_MUX_DEBUG
#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
.mux_reg = FUNC_MUX_CTRL_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
.pull_reg = PULL_DWN_CTRL_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
.pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
.mux_reg = OMAP730_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
.pull_reg = OMAP730_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
.mux_reg = OMAP850_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \
.pull_reg = OMAP850_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#else
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
#define MUX_REG_730(reg, mode_offset, mode) \
.mux_reg = OMAP730_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define MUX_REG_850(reg, mode_offset, mode) \
.mux_reg = OMAP850_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
pull_reg, pull_bit, pull_status, \
pu_pd_reg, pu_pd_status, debug_status) \
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG(mux_reg, mode_offset, mode) \
PULL_REG(pull_reg, pull_bit, pull_status) \
PU_PD_REG(pu_pd_reg, pu_pd_status) \
},
/*
* OMAP730/850 has a slightly different config for the pin mux.
* - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
* as mux config
*/
#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
pull_bit, pull_status, debug_status)\
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG_730(mux_reg, mode_offset, mode) \
PULL_REG_730(mux_reg, pull_bit, pull_status) \
PU_PD_REG(NA, 0) \
},
#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \
pull_bit, pull_status, debug_status)\
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG_850(mux_reg, mode_offset, mode) \
PULL_REG_850(mux_reg, pull_bit, pull_status) \
PU_PD_REG(NA, 0) \
},
#define MUX_CFG_24XX(desc, reg_offset, mode, \
pull_en, pull_mode, dbg) \
{ \
.name = desc, \
.debug = dbg, \
.mux_reg = reg_offset, \
.mask = mode, \
.pull_val = pull_en, \
.pu_pd_val = pull_mode, \
},
/* 24xx/34xx mux bit defines */
#define OMAP2_PULL_ENA (1 << 3)
#define OMAP2_PULL_UP (1 << 4)
#define OMAP2_ALTELECTRICALSEL (1 << 5)
/* 34xx specific mux bit defines */
#define OMAP3_INPUT_EN (1 << 8)
#define OMAP3_OFF_EN (1 << 9)
#define OMAP3_OFFOUT_EN (1 << 10)
#define OMAP3_OFFOUT_VAL (1 << 11)
#define OMAP3_OFF_PULL_EN (1 << 12)
#define OMAP3_OFF_PULL_UP (1 << 13)
#define OMAP3_WAKEUP_EN (1 << 14)
/* 34xx mux mode options for each pin. See TRM for options */
#define OMAP34XX_MUX_MODE0 0
#define OMAP34XX_MUX_MODE1 1
#define OMAP34XX_MUX_MODE2 2
#define OMAP34XX_MUX_MODE3 3
#define OMAP34XX_MUX_MODE4 4
#define OMAP34XX_MUX_MODE5 5
#define OMAP34XX_MUX_MODE6 6
#define OMAP34XX_MUX_MODE7 7
/* 34xx active pin states */
#define OMAP34XX_PIN_OUTPUT 0
#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
| OMAP2_PULL_UP)
#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
/* 34xx off mode states */
#define OMAP34XX_PIN_OFF_NONE 0
#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
| OMAP3_OFFOUT_VAL)
#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
| OMAP3_OFF_PULL_UP)
#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
.name = desc, \
.debug = 0, \
.mux_reg = reg_offset, \
.mux_val = mux_value \
},
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
#if defined(CONFIG_ARCH_OMAP34XX)
u16 mux_val; /* Wake-up, off mode, pull, mux mode */
#endif
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
const char *pull_name;
const unsigned int pull_reg;
const unsigned char pull_val;
const unsigned char pull_bit;
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
#endif
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
const char *mux_reg_name;
#endif
};
enum omap730_index {
/* OMAP 730 keyboard */
E2_730_KBR0,
J7_730_KBR1,
E1_730_KBR2,
F3_730_KBR3,
D2_730_KBR4,
C2_730_KBC0,
D3_730_KBC1,
E4_730_KBC2,
F4_730_KBC3,
E3_730_KBC4,
/* USB */
AA17_730_USB_DM,
W16_730_USB_PU_EN,
W17_730_USB_VBUSI,
};
enum omap850_index {
/* OMAP 850 keyboard */
E2_850_KBR0,
J7_850_KBR1,
E1_850_KBR2,
F3_850_KBR3,
D2_850_KBR4,
C2_850_KBC0,
D3_850_KBC1,
E4_850_KBC2,
F4_850_KBC3,
E3_850_KBC4,
/* USB */
AA17_850_USB_DM,
W16_850_USB_PU_EN,
W17_850_USB_VBUSI,
};
enum omap1xxx_index {
/* UART1 (BT_UART_GATING)*/
UART1_TX = 0,
UART1_RTS,
/* UART2 (COM_UART_GATING)*/
UART2_TX,
UART2_RX,
UART2_CTS,
UART2_RTS,
/* UART3 (GIGA_UART_GATING) */
UART3_TX,
UART3_RX,
UART3_CTS,
UART3_RTS,
UART3_CLKREQ,
UART3_BCLK, /* 12MHz clock out */
Y15_1610_UART3_RTS,
/* PWT & PWL */
PWT,
PWL,
/* USB master generic */
R18_USB_VBUS,
R18_1510_USB_GPIO0,
W4_USB_PUEN,
W4_USB_CLKO,
W4_USB_HIGHZ,
W4_GPIO58,
/* USB1 master */
USB1_SUSP,
USB1_SEO,
W13_1610_USB1_SE0,
USB1_TXEN,
USB1_TXD,
USB1_VP,
USB1_VM,
USB1_RCV,
USB1_SPEED,
R13_1610_USB1_SPEED,
R13_1710_USB1_SE0,
/* USB2 master */
USB2_SUSP,
USB2_VP,
USB2_TXEN,
USB2_VM,
USB2_RCV,
USB2_SEO,
USB2_TXD,
/* OMAP-1510 GPIO */
R18_1510_GPIO0,
R19_1510_GPIO1,
M14_1510_GPIO2,
/* OMAP1610 GPIO */
P18_1610_GPIO3,
Y15_1610_GPIO17,
/* OMAP-1710 GPIO */
R18_1710_GPIO0,
V2_1710_GPIO10,
N21_1710_GPIO14,
W15_1710_GPIO40,
/* MPUIO */
MPUIO2,
N15_1610_MPUIO2,
MPUIO4,
MPUIO5,
T20_1610_MPUIO5,
W11_1610_MPUIO6,
V10_1610_MPUIO7,
W11_1610_MPUIO9,
V10_1610_MPUIO10,
W10_1610_MPUIO11,
E20_1610_MPUIO13,
U20_1610_MPUIO14,
E19_1610_MPUIO15,
/* MCBSP2 */
MCBSP2_CLKR,
MCBSP2_CLKX,
MCBSP2_DR,
MCBSP2_DX,
MCBSP2_FSR,
MCBSP2_FSX,
/* MCBSP3 */
MCBSP3_CLKX,
/* Misc ballouts */
BALLOUT_V8_ARMIO3,
N20_HDQ,
/* OMAP-1610 MMC2 */
W8_1610_MMC2_DAT0,
V8_1610_MMC2_DAT1,
W15_1610_MMC2_DAT2,
R10_1610_MMC2_DAT3,
Y10_1610_MMC2_CLK,
Y8_1610_MMC2_CMD,
V9_1610_MMC2_CMDDIR,
V5_1610_MMC2_DATDIR0,
W19_1610_MMC2_DATDIR1,
R18_1610_MMC2_CLKIN,
/* OMAP-1610 External Trace Interface */
M19_1610_ETM_PSTAT0,
L15_1610_ETM_PSTAT1,
L18_1610_ETM_PSTAT2,
L19_1610_ETM_D0,
J19_1610_ETM_D6,
J18_1610_ETM_D7,
/* OMAP16XX GPIO */
P20_1610_GPIO4,
V9_1610_GPIO7,
W8_1610_GPIO9,
N20_1610_GPIO11,
N19_1610_GPIO13,
P10_1610_GPIO22,
V5_1610_GPIO24,
AA20_1610_GPIO_41,
W19_1610_GPIO48,
M7_1610_GPIO62,
V14_16XX_GPIO37,
R9_16XX_GPIO18,
L14_16XX_GPIO49,
/* OMAP-1610 uWire */
V19_1610_UWIRE_SCLK,
U18_1610_UWIRE_SDI,
W21_1610_UWIRE_SDO,
N14_1610_UWIRE_CS0,
P15_1610_UWIRE_CS3,
N15_1610_UWIRE_CS1,
/* OMAP-1610 SPI */
U19_1610_SPIF_SCK,
U18_1610_SPIF_DIN,
P20_1610_SPIF_DIN,
W21_1610_SPIF_DOUT,
R18_1610_SPIF_DOUT,
N14_1610_SPIF_CS0,
N15_1610_SPIF_CS1,
T19_1610_SPIF_CS2,
P15_1610_SPIF_CS3,
/* OMAP-1610 Flash */
L3_1610_FLASH_CS2B_OE,
M8_1610_FLASH_CS2B_WE,
/* First MMC */
MMC_CMD,
MMC_DAT1,
MMC_DAT2,
MMC_DAT0,
MMC_CLK,
MMC_DAT3,
/* OMAP-1710 MMC CMDDIR and DATDIR0 */
M15_1710_MMC_CLKI,
P19_1710_MMC_CMDDIR,
P20_1710_MMC_DATDIR0,
/* OMAP-1610 USB0 alternate pin configuration */
W9_USB0_TXEN,
AA9_USB0_VP,
Y5_USB0_RCV,
R9_USB0_VM,
V6_USB0_TXD,
W5_USB0_SE0,
V9_USB0_SPEED,
V9_USB0_SUSP,
/* USB2 */
W9_USB2_TXEN,
AA9_USB2_VP,
Y5_USB2_RCV,
R9_USB2_VM,
V6_USB2_TXD,
W5_USB2_SE0,
/* 16XX UART */
R13_1610_UART1_TX,
V14_16XX_UART1_RX,
R14_1610_UART1_CTS,
AA15_1610_UART1_RTS,
R9_16XX_UART2_RX,
L14_16XX_UART3_RX,
/* I2C OMAP-1610 */
I2C_SCL,
I2C_SDA,
/* Keypad */
F18_1610_KBC0,
D20_1610_KBC1,
D19_1610_KBC2,
E18_1610_KBC3,
C21_1610_KBC4,
G18_1610_KBR0,
F19_1610_KBR1,
H14_1610_KBR2,
E20_1610_KBR3,
E19_1610_KBR4,
N19_1610_KBR5,
/* Power management */
T20_1610_LOW_PWR,
/* MCLK Settings */
V5_1710_MCLK_ON,
V5_1710_MCLK_OFF,
R10_1610_MCLK_ON,
R10_1610_MCLK_OFF,
/* CompactFlash controller */
P11_1610_CF_CD2,
R11_1610_CF_IOIS16,
V10_1610_CF_IREQ,
W10_1610_CF_RESET,
W11_1610_CF_CD1,
/* parallel camera */
J15_1610_CAM_LCLK,
J18_1610_CAM_D7,
J19_1610_CAM_D6,
J14_1610_CAM_D5,
K18_1610_CAM_D4,
K19_1610_CAM_D3,
K15_1610_CAM_D2,
K14_1610_CAM_D1,
L19_1610_CAM_D0,
L18_1610_CAM_VS,
L15_1610_CAM_HS,
M19_1610_CAM_RSTZ,
Y15_1610_CAM_OUTCLK,
/* serial camera */
H19_1610_CAM_EXCLK,
Y12_1610_CCP_CLKP,
W13_1610_CCP_CLKM,
W14_1610_CCP_DATAP,
Y14_1610_CCP_DATAM,
};
enum omap24xx_index {
/* 24xx I2C */
M19_24XX_I2C1_SCL,
L15_24XX_I2C1_SDA,
J15_24XX_I2C2_SCL,
H19_24XX_I2C2_SDA,
/* 24xx Menelaus interrupt */
W19_24XX_SYS_NIRQ,
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
/* 24xx GPMC chipselects, wait pin monitoring */
E2_GPMC_NCS2,
L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
P1_GPMC_WAIT3,
/* 242X McBSP */
Y15_24XX_MCBSP2_CLKX,
R14_24XX_MCBSP2_FSX,
W15_24XX_MCBSP2_DR,
V15_24XX_MCBSP2_DX,
/* 24xx GPIO */
M21_242X_GPIO11,
P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
Y11_242X_GPIO16,
AA12_242X_GPIO17,
AA8_242X_GPIO58,
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
N15_24XX_GPIO85,
M15_24XX_GPIO92,
P20_24XX_GPIO93,
P18_24XX_GPIO95,
M18_24XX_GPIO96,
L14_24XX_GPIO97,
J15_24XX_GPIO99,
V14_24XX_GPIO117,
P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
W2_242X_GPIO50,
U4_242X_GPIO51,
V3_242X_GPIO52,
V2_242X_GPIO53,
V6_242X_GPIO53,
T4_242X_GPIO54,
Y4_242X_GPIO54,
T3_242X_GPIO55,
U2_242X_GPIO56,
/* 24xx external DMA requests */
AA10_242X_DMAREQ0,
AA6_242X_DMAREQ1,
E4_242X_DMAREQ2,
G4_242X_DMAREQ3,
D3_242X_DMAREQ4,
E3_242X_DMAREQ5,
/* UART3 */
K15_24XX_UART3_TX,
K14_24XX_UART3_RX,
/* MMC/SDIO */
G19_24XX_MMC_CLKO,
H18_24XX_MMC_CMD,
F20_24XX_MMC_DAT0,
H14_24XX_MMC_DAT1,
E19_24XX_MMC_DAT2,
D19_24XX_MMC_DAT3,
F19_24XX_MMC_DAT_DIR0,
E20_24XX_MMC_DAT_DIR1,
F18_24XX_MMC_DAT_DIR2,
E18_24XX_MMC_DAT_DIR3,
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
/* Full speed USB */
J20_24XX_USB0_PUEN,
J19_24XX_USB0_VP,
K20_24XX_USB0_VM,
J18_24XX_USB0_RCV,
K19_24XX_USB0_TXEN,
J14_24XX_USB0_SE0,
K18_24XX_USB0_DAT,
N14_24XX_USB1_SE0,
W12_24XX_USB1_SE0,
P15_24XX_USB1_DAT,
R13_24XX_USB1_DAT,
W20_24XX_USB1_TXEN,
P13_24XX_USB1_TXEN,
V19_24XX_USB1_RCV,
V12_24XX_USB1_RCV,
AA10_24XX_USB2_SE0,
Y11_24XX_USB2_DAT,
AA12_24XX_USB2_TXEN,
AA6_24XX_USB2_RCV,
AA4_24XX_USB2_TLLSE0,
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
V18_24XX_KBR2,
M21_24XX_KBR3,
E5__24XX_KBR4,
M18_24XX_KBR5,
R20_24XX_KBC0,
M14_24XX_KBC1,
H19_24XX_KBC2,
V17_24XX_KBC3,
P21_24XX_KBC4,
L14_24XX_KBC5,
N19_24XX_KBC6,
/* 24xx Menelaus Keypad GPIO */
B3__24XX_KBR5,
AA4_24XX_KBC2,
B13_24XX_KBC6,
/* 2430 USB */
AD9_2430_USB0_PUEN,
Y11_2430_USB0_VP,
AD7_2430_USB0_VM,
AE7_2430_USB0_RCV,
AD4_2430_USB0_TXEN,
AF9_2430_USB0_SE0,
AE6_2430_USB0_DAT,
AD24_2430_USB1_SE0,
AB24_2430_USB1_RCV,
Y25_2430_USB1_TXEN,
AA26_2430_USB1_DAT,
/* 2430 HS-USB */
AD9_2430_USB0HS_DATA3,
Y11_2430_USB0HS_DATA4,
AD7_2430_USB0HS_DATA5,
AE7_2430_USB0HS_DATA6,
AD4_2430_USB0HS_DATA2,
AF9_2430_USB0HS_DATA0,
AE6_2430_USB0HS_DATA1,
AE8_2430_USB0HS_CLK,
AD8_2430_USB0HS_DIR,
AE5_2430_USB0HS_STP,
AE9_2430_USB0HS_NXT,
AC7_2430_USB0HS_DATA7,
/* 2430 McBSP */
AD6_2430_MCBSP_CLKS,
AB2_2430_MCBSP1_CLKR,
AD5_2430_MCBSP1_FSR,
AA1_2430_MCBSP1_DX,
AF3_2430_MCBSP1_DR,
AB3_2430_MCBSP1_FSX,
Y9_2430_MCBSP1_CLKX,
AC10_2430_MCBSP2_FSX,
AD16_2430_MCBSP2_CLX,
AE13_2430_MCBSP2_DX,
AD13_2430_MCBSP2_DR,
AC10_2430_MCBSP2_FSX_OFF,
AD16_2430_MCBSP2_CLX_OFF,
AE13_2430_MCBSP2_DX_OFF,
AD13_2430_MCBSP2_DR_OFF,
AC9_2430_MCBSP3_CLKX,
AE4_2430_MCBSP3_FSX,
AE2_2430_MCBSP3_DR,
AF4_2430_MCBSP3_DX,
N3_2430_MCBSP4_CLKX,
AD23_2430_MCBSP4_DR,
AB25_2430_MCBSP4_DX,
AC25_2430_MCBSP4_FSX,
AE16_2430_MCBSP5_CLKX,
AF12_2430_MCBSP5_FSX,
K7_2430_MCBSP5_DX,
M1_2430_MCBSP5_DR,
/* 2430 McSPI*/
Y18_2430_MCSPI1_CLK,
AD15_2430_MCSPI1_SIMO,
AE17_2430_MCSPI1_SOMI,
U1_2430_MCSPI1_CS0,
/* Touchscreen GPIO */
AF19_2430_GPIO_85,
};
enum omap34xx_index {
/* 34xx I2C */
K21_34XX_I2C1_SCL,
J21_34XX_I2C1_SDA,
AF15_34XX_I2C2_SCL,
AE15_34XX_I2C2_SDA,
AF14_34XX_I2C3_SCL,
AG14_34XX_I2C3_SDA,
AD26_34XX_I2C4_SCL,
AE26_34XX_I2C4_SDA,
/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
Y8_3430_USB1HS_PHY_CLK,
Y9_3430_USB1HS_PHY_STP,
AA14_3430_USB1HS_PHY_DIR,
AA11_3430_USB1HS_PHY_NXT,
W13_3430_USB1HS_PHY_DATA0,
W12_3430_USB1HS_PHY_DATA1,
W11_3430_USB1HS_PHY_DATA2,
Y11_3430_USB1HS_PHY_DATA3,
W9_3430_USB1HS_PHY_DATA4,
Y12_3430_USB1HS_PHY_DATA5,
W8_3430_USB1HS_PHY_DATA6,
Y13_3430_USB1HS_PHY_DATA7,
/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
AA8_3430_USB2HS_PHY_CLK,
AA10_3430_USB2HS_PHY_STP,
AA9_3430_USB2HS_PHY_DIR,
AB11_3430_USB2HS_PHY_NXT,
AB10_3430_USB2HS_PHY_DATA0,
AB9_3430_USB2HS_PHY_DATA1,
W3_3430_USB2HS_PHY_DATA2,
T4_3430_USB2HS_PHY_DATA3,
T3_3430_USB2HS_PHY_DATA4,
R3_3430_USB2HS_PHY_DATA5,
R4_3430_USB2HS_PHY_DATA6,
T2_3430_USB2HS_PHY_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 1*/
Y8_3430_USB1HS_TLL_CLK,
Y9_3430_USB1HS_TLL_STP,
AA14_3430_USB1HS_TLL_DIR,
AA11_3430_USB1HS_TLL_NXT,
W13_3430_USB1HS_TLL_DATA0,
W12_3430_USB1HS_TLL_DATA1,
W11_3430_USB1HS_TLL_DATA2,
Y11_3430_USB1HS_TLL_DATA3,
W9_3430_USB1HS_TLL_DATA4,
Y12_3430_USB1HS_TLL_DATA5,
W8_3430_USB1HS_TLL_DATA6,
Y13_3430_USB1HS_TLL_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 2*/
AA8_3430_USB2HS_TLL_CLK,
AA10_3430_USB2HS_TLL_STP,
AA9_3430_USB2HS_TLL_DIR,
AB11_3430_USB2HS_TLL_NXT,
AB10_3430_USB2HS_TLL_DATA0,
AB9_3430_USB2HS_TLL_DATA1,
W3_3430_USB2HS_TLL_DATA2,
T4_3430_USB2HS_TLL_DATA3,
T3_3430_USB2HS_TLL_DATA4,
R3_3430_USB2HS_TLL_DATA5,
R4_3430_USB2HS_TLL_DATA6,
T2_3430_USB2HS_TLL_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 3*/
AA6_3430_USB3HS_TLL_CLK,
AB3_3430_USB3HS_TLL_STP,
AA3_3430_USB3HS_TLL_DIR,
Y3_3430_USB3HS_TLL_NXT,
AA5_3430_USB3HS_TLL_DATA0,
Y4_3430_USB3HS_TLL_DATA1,
Y5_3430_USB3HS_TLL_DATA2,
W5_3430_USB3HS_TLL_DATA3,
AB12_3430_USB3HS_TLL_DATA4,
AB13_3430_USB3HS_TLL_DATA5,
AA13_3430_USB3HS_TLL_DATA6,
AA12_3430_USB3HS_TLL_DATA7,
/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
AF10_3430_USB1FS_PHY_MM1_RXDP,
AG9_3430_USB1FS_PHY_MM1_RXDM,
W13_3430_USB1FS_PHY_MM1_RXRCV,
W12_3430_USB1FS_PHY_MM1_TXSE0,
W11_3430_USB1FS_PHY_MM1_TXDAT,
Y11_3430_USB1FS_PHY_MM1_TXEN_N,
/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
AF7_3430_USB2FS_PHY_MM2_RXDP,
AH7_3430_USB2FS_PHY_MM2_RXDM,
AB10_3430_USB2FS_PHY_MM2_RXRCV,
AB9_3430_USB2FS_PHY_MM2_TXSE0,
W3_3430_USB2FS_PHY_MM2_TXDAT,
T4_3430_USB2FS_PHY_MM2_TXEN_N,
/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
AH3_3430_USB3FS_PHY_MM3_RXDP,
AE3_3430_USB3FS_PHY_MM3_RXDM,
AD1_3430_USB3FS_PHY_MM3_RXRCV,
AE1_3430_USB3FS_PHY_MM3_TXSE0,
AD2_3430_USB3FS_PHY_MM3_TXDAT,
AC1_3430_USB3FS_PHY_MM3_TXEN_N,
/* 34xx GPIO
* - normally these are bidirectional, no internal pullup/pulldown
* - "_UP" suffix (GPIO3_UP) if internal pullup is configured
* - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
* - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
*/
AF26_34XX_GPIO0,
AF22_34XX_GPIO9,
AG9_34XX_GPIO23,
AH8_34XX_GPIO29,
U8_34XX_GPIO54_OUT,
U8_34XX_GPIO54_DOWN,
L8_34XX_GPIO63,
G25_34XX_GPIO86_OUT,
AG4_34XX_GPIO134_OUT,
AF4_34XX_GPIO135_OUT,
AE4_34XX_GPIO136_OUT,
AF6_34XX_GPIO140_UP,
AE6_34XX_GPIO141,
AF5_34XX_GPIO142,
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
H16_34XX_SDRC_CKE0,
H17_34XX_SDRC_CKE1,
/* MMC1 */
N28_3430_MMC1_CLK,
M27_3430_MMC1_CMD,
N27_3430_MMC1_DAT0,
N26_3430_MMC1_DAT1,
N25_3430_MMC1_DAT2,
P28_3430_MMC1_DAT3,
P27_3430_MMC1_DAT4,
P26_3430_MMC1_DAT5,
R27_3430_MMC1_DAT6,
R25_3430_MMC1_DAT7,
/* MMC2 */
AE2_3430_MMC2_CLK,
AG5_3430_MMC2_CMD,
AH5_3430_MMC2_DAT0,
AH4_3430_MMC2_DAT1,
AG4_3430_MMC2_DAT2,
AF4_3430_MMC2_DAT3,
/* MMC3 */
AF10_3430_MMC3_CLK,
AC3_3430_MMC3_CMD,
AE11_3430_MMC3_DAT0,
AH9_3430_MMC3_DAT1,
AF13_3430_MMC3_DAT2,
AF13_3430_MMC3_DAT3,
/* SYS_NIRQ T2 INT1 */
AF26_34XX_SYS_NIRQ,
};
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
int (*cfg_reg)(const struct pin_config *cfg);
};
#ifdef CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
extern int omap1_mux_init(void);
extern int omap2_mux_init(void);
extern int omap_mux_register(struct omap_mux_cfg *);
extern int omap_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
static inline int omap1_mux_init(void) { return 0; }
static inline int omap2_mux_init(void) { return 0; }
static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink