740 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			740 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Support for Sharp SL-C7xx PDAs
 | |
|  * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
 | |
|  *
 | |
|  * Copyright (c) 2004-2005 Richard Purdie
 | |
|  *
 | |
|  * Based on Sharp's 2.4 kernel patches/lubbock.c
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/major.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/mmc/host.h>
 | |
| #include <linux/mtd/physmap.h>
 | |
| #include <linux/pm.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/backlight.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/spi/spi.h>
 | |
| #include <linux/spi/ads7846.h>
 | |
| #include <linux/spi/corgi_lcd.h>
 | |
| #include <linux/mtd/sharpsl.h>
 | |
| #include <linux/input/matrix_keypad.h>
 | |
| #include <video/w100fb.h>
 | |
| 
 | |
| #include <asm/setup.h>
 | |
| #include <asm/memory.h>
 | |
| #include <asm/mach-types.h>
 | |
| #include <mach/hardware.h>
 | |
| #include <asm/irq.h>
 | |
| #include <asm/system.h>
 | |
| 
 | |
| #include <asm/mach/arch.h>
 | |
| #include <asm/mach/map.h>
 | |
| #include <asm/mach/irq.h>
 | |
| 
 | |
| #include <mach/pxa25x.h>
 | |
| #include <plat/i2c.h>
 | |
| #include <mach/irda.h>
 | |
| #include <mach/mmc.h>
 | |
| #include <mach/udc.h>
 | |
| #include <mach/pxa2xx_spi.h>
 | |
| #include <mach/corgi.h>
 | |
| #include <mach/sharpsl.h>
 | |
| 
 | |
| #include <asm/mach/sharpsl_param.h>
 | |
| #include <asm/hardware/scoop.h>
 | |
| 
 | |
| #include "generic.h"
 | |
| #include "devices.h"
 | |
| #include "sharpsl.h"
 | |
| 
 | |
| static unsigned long corgi_pin_config[] __initdata = {
 | |
| 	/* Static Memory I/O */
 | |
| 	GPIO78_nCS_2,	/* w100fb */
 | |
| 	GPIO80_nCS_4,	/* scoop */
 | |
| 
 | |
| 	/* SSP1 */
 | |
| 	GPIO23_SSP1_SCLK,
 | |
| 	GPIO25_SSP1_TXD,
 | |
| 	GPIO26_SSP1_RXD,
 | |
| 	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
 | |
| 
 | |
| 	/* I2S */
 | |
| 	GPIO28_I2S_BITCLK_OUT,
 | |
| 	GPIO29_I2S_SDATA_IN,
 | |
| 	GPIO30_I2S_SDATA_OUT,
 | |
| 	GPIO31_I2S_SYNC,
 | |
| 	GPIO32_I2S_SYSCLK,
 | |
| 
 | |
| 	/* Infra-Red */
 | |
| 	GPIO47_FICP_TXD,
 | |
| 	GPIO46_FICP_RXD,
 | |
| 
 | |
| 	/* FFUART */
 | |
| 	GPIO40_FFUART_DTR,
 | |
| 	GPIO41_FFUART_RTS,
 | |
| 	GPIO39_FFUART_TXD,
 | |
| 	GPIO37_FFUART_DSR,
 | |
| 	GPIO34_FFUART_RXD,
 | |
| 	GPIO35_FFUART_CTS,
 | |
| 
 | |
| 	/* PC Card */
 | |
| 	GPIO48_nPOE,
 | |
| 	GPIO49_nPWE,
 | |
| 	GPIO50_nPIOR,
 | |
| 	GPIO51_nPIOW,
 | |
| 	GPIO52_nPCE_1,
 | |
| 	GPIO53_nPCE_2,
 | |
| 	GPIO54_nPSKTSEL,
 | |
| 	GPIO55_nPREG,
 | |
| 	GPIO56_nPWAIT,
 | |
| 	GPIO57_nIOIS16,
 | |
| 
 | |
| 	/* MMC */
 | |
| 	GPIO6_MMC_CLK,
 | |
| 	GPIO8_MMC_CS0,
 | |
| 
 | |
| 	/* GPIO Matrix Keypad */
 | |
| 	GPIO66_GPIO,	/* column 0 */
 | |
| 	GPIO67_GPIO,	/* column 1 */
 | |
| 	GPIO68_GPIO,	/* column 2 */
 | |
| 	GPIO69_GPIO,	/* column 3 */
 | |
| 	GPIO70_GPIO,	/* column 4 */
 | |
| 	GPIO71_GPIO,	/* column 5 */
 | |
| 	GPIO72_GPIO,	/* column 6 */
 | |
| 	GPIO73_GPIO,	/* column 7 */
 | |
| 	GPIO74_GPIO,	/* column 8 */
 | |
| 	GPIO75_GPIO,	/* column 9 */
 | |
| 	GPIO76_GPIO,	/* column 10 */
 | |
| 	GPIO77_GPIO,	/* column 11 */
 | |
| 	GPIO58_GPIO,	/* row 0 */
 | |
| 	GPIO59_GPIO,	/* row 1 */
 | |
| 	GPIO60_GPIO,	/* row 2 */
 | |
| 	GPIO61_GPIO,	/* row 3 */
 | |
| 	GPIO62_GPIO,	/* row 4 */
 | |
| 	GPIO63_GPIO,	/* row 5 */
 | |
| 	GPIO64_GPIO,	/* row 6 */
 | |
| 	GPIO65_GPIO,	/* row 7 */
 | |
| 
 | |
| 	/* GPIO */
 | |
| 	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
 | |
| 	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
 | |
| 	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
 | |
| 	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
 | |
| 	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
 | |
| 
 | |
| 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Corgi SCOOP Device
 | |
|  */
 | |
| static struct resource corgi_scoop_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start		= 0x10800000,
 | |
| 		.end		= 0x10800fff,
 | |
| 		.flags		= IORESOURCE_MEM,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct scoop_config corgi_scoop_setup = {
 | |
| 	.io_dir 	= CORGI_SCOOP_IO_DIR,
 | |
| 	.io_out		= CORGI_SCOOP_IO_OUT,
 | |
| 	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
 | |
| };
 | |
| 
 | |
| struct platform_device corgiscoop_device = {
 | |
| 	.name		= "sharp-scoop",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
|  		.platform_data	= &corgi_scoop_setup,
 | |
| 	},
 | |
| 	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
 | |
| 	.resource	= corgi_scoop_resources,
 | |
| };
 | |
| 
 | |
| static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 | |
| {
 | |
| 	.dev        = &corgiscoop_device.dev,
 | |
| 	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
 | |
| 	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
 | |
| 	.cd_irq_str = "PCMCIA0 CD",
 | |
| },
 | |
| };
 | |
| 
 | |
| static struct scoop_pcmcia_config corgi_pcmcia_config = {
 | |
| 	.devs         = &corgi_pcmcia_scoop[0],
 | |
| 	.num_devs     = 1,
 | |
| };
 | |
| 
 | |
| EXPORT_SYMBOL(corgiscoop_device);
 | |
| 
 | |
| static struct w100_mem_info corgi_fb_mem = {
 | |
| 	.ext_cntl          = 0x00040003,
 | |
| 	.sdram_mode_reg    = 0x00650021,
 | |
| 	.ext_timing_cntl   = 0x10002a4a,
 | |
| 	.io_cntl           = 0x7ff87012,
 | |
| 	.size              = 0x1fffff,
 | |
| };
 | |
| 
 | |
| static struct w100_gen_regs corgi_fb_regs = {
 | |
| 	.lcd_format    = 0x00000003,
 | |
| 	.lcdd_cntl1    = 0x01CC0000,
 | |
| 	.lcdd_cntl2    = 0x0003FFFF,
 | |
| 	.genlcd_cntl1  = 0x00FFFF0D,
 | |
| 	.genlcd_cntl2  = 0x003F3003,
 | |
| 	.genlcd_cntl3  = 0x000102aa,
 | |
| };
 | |
| 
 | |
| static struct w100_gpio_regs corgi_fb_gpio = {
 | |
| 	.init_data1   = 0x000000bf,
 | |
| 	.init_data2   = 0x00000000,
 | |
| 	.gpio_dir1    = 0x00000000,
 | |
| 	.gpio_oe1     = 0x03c0feff,
 | |
| 	.gpio_dir2    = 0x00000000,
 | |
| 	.gpio_oe2     = 0x00000000,
 | |
| };
 | |
| 
 | |
| static struct w100_mode corgi_fb_modes[] = {
 | |
| {
 | |
| 	.xres            = 480,
 | |
| 	.yres            = 640,
 | |
| 	.left_margin     = 0x56,
 | |
| 	.right_margin    = 0x55,
 | |
| 	.upper_margin    = 0x03,
 | |
| 	.lower_margin    = 0x00,
 | |
| 	.crtc_ss         = 0x82360056,
 | |
| 	.crtc_ls         = 0xA0280000,
 | |
| 	.crtc_gs         = 0x80280028,
 | |
| 	.crtc_vpos_gs    = 0x02830002,
 | |
| 	.crtc_rev        = 0x00400008,
 | |
| 	.crtc_dclk       = 0xA0000000,
 | |
| 	.crtc_gclk       = 0x8015010F,
 | |
| 	.crtc_goe        = 0x80100110,
 | |
| 	.crtc_ps1_active = 0x41060010,
 | |
| 	.pll_freq        = 75,
 | |
| 	.fast_pll_freq   = 100,
 | |
| 	.sysclk_src      = CLK_SRC_PLL,
 | |
| 	.sysclk_divider  = 0,
 | |
| 	.pixclk_src      = CLK_SRC_PLL,
 | |
| 	.pixclk_divider  = 2,
 | |
| 	.pixclk_divider_rotated = 6,
 | |
| },{
 | |
| 	.xres            = 240,
 | |
| 	.yres            = 320,
 | |
| 	.left_margin     = 0x27,
 | |
| 	.right_margin    = 0x2e,
 | |
| 	.upper_margin    = 0x01,
 | |
| 	.lower_margin    = 0x00,
 | |
| 	.crtc_ss         = 0x81170027,
 | |
| 	.crtc_ls         = 0xA0140000,
 | |
| 	.crtc_gs         = 0xC0140014,
 | |
| 	.crtc_vpos_gs    = 0x00010141,
 | |
| 	.crtc_rev        = 0x00400008,
 | |
| 	.crtc_dclk       = 0xA0000000,
 | |
| 	.crtc_gclk       = 0x8015010F,
 | |
| 	.crtc_goe        = 0x80100110,
 | |
| 	.crtc_ps1_active = 0x41060010,
 | |
| 	.pll_freq        = 0,
 | |
| 	.fast_pll_freq   = 0,
 | |
| 	.sysclk_src      = CLK_SRC_XTAL,
 | |
| 	.sysclk_divider  = 0,
 | |
| 	.pixclk_src      = CLK_SRC_XTAL,
 | |
| 	.pixclk_divider  = 1,
 | |
| 	.pixclk_divider_rotated = 1,
 | |
| },
 | |
| 
 | |
| };
 | |
| 
 | |
| static struct w100fb_mach_info corgi_fb_info = {
 | |
| 	.init_mode  = INIT_MODE_ROTATED,
 | |
| 	.mem        = &corgi_fb_mem,
 | |
| 	.regs       = &corgi_fb_regs,
 | |
| 	.modelist   = &corgi_fb_modes[0],
 | |
| 	.num_modes  = 2,
 | |
| 	.gpio       = &corgi_fb_gpio,
 | |
| 	.xtal_freq  = 12500000,
 | |
| 	.xtal_dbl   = 0,
 | |
| };
 | |
| 
 | |
| static struct resource corgi_fb_resources[] = {
 | |
| 	[0] = {
 | |
| 		.start   = 0x08000000,
 | |
| 		.end     = 0x08ffffff,
 | |
| 		.flags   = IORESOURCE_MEM,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device corgifb_device = {
 | |
| 	.name           = "w100fb",
 | |
| 	.id             = -1,
 | |
| 	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
 | |
| 	.resource	= corgi_fb_resources,
 | |
| 	.dev            = {
 | |
| 		.platform_data = &corgi_fb_info,
 | |
| 	},
 | |
| 
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Corgi Keyboard Device
 | |
|  */
 | |
| #define CORGI_KEY_CALENDER	KEY_F1
 | |
| #define CORGI_KEY_ADDRESS	KEY_F2
 | |
| #define CORGI_KEY_FN		KEY_F3
 | |
| #define CORGI_KEY_CANCEL	KEY_F4
 | |
| #define CORGI_KEY_OFF		KEY_SUSPEND
 | |
| #define CORGI_KEY_EXOK		KEY_F5
 | |
| #define CORGI_KEY_EXCANCEL	KEY_F6
 | |
| #define CORGI_KEY_EXJOGDOWN	KEY_F7
 | |
| #define CORGI_KEY_EXJOGUP	KEY_F8
 | |
| #define CORGI_KEY_JAP1		KEY_LEFTCTRL
 | |
| #define CORGI_KEY_JAP2		KEY_LEFTALT
 | |
| #define CORGI_KEY_MAIL		KEY_F10
 | |
| #define CORGI_KEY_OK		KEY_F11
 | |
| #define CORGI_KEY_MENU		KEY_F12
 | |
| 
 | |
| static const uint32_t corgikbd_keymap[] = {
 | |
| 	KEY(0, 1, KEY_1),
 | |
| 	KEY(0, 2, KEY_3),
 | |
| 	KEY(0, 3, KEY_5),
 | |
| 	KEY(0, 4, KEY_6),
 | |
| 	KEY(0, 5, KEY_7),
 | |
| 	KEY(0, 6, KEY_9),
 | |
| 	KEY(0, 7, KEY_0),
 | |
| 	KEY(0, 8, KEY_BACKSPACE),
 | |
| 	KEY(1, 1, KEY_2),
 | |
| 	KEY(1, 2, KEY_4),
 | |
| 	KEY(1, 3, KEY_R),
 | |
| 	KEY(1, 4, KEY_Y),
 | |
| 	KEY(1, 5, KEY_8),
 | |
| 	KEY(1, 6, KEY_I),
 | |
| 	KEY(1, 7, KEY_O),
 | |
| 	KEY(1, 8, KEY_P),
 | |
| 	KEY(2, 0, KEY_TAB),
 | |
| 	KEY(2, 1, KEY_Q),
 | |
| 	KEY(2, 2, KEY_E),
 | |
| 	KEY(2, 3, KEY_T),
 | |
| 	KEY(2, 4, KEY_G),
 | |
| 	KEY(2, 5, KEY_U),
 | |
| 	KEY(2, 6, KEY_J),
 | |
| 	KEY(2, 7, KEY_K),
 | |
| 	KEY(3, 0, CORGI_KEY_CALENDER),
 | |
| 	KEY(3, 1, KEY_W),
 | |
| 	KEY(3, 2, KEY_S),
 | |
| 	KEY(3, 3, KEY_F),
 | |
| 	KEY(3, 4, KEY_V),
 | |
| 	KEY(3, 5, KEY_H),
 | |
| 	KEY(3, 6, KEY_M),
 | |
| 	KEY(3, 7, KEY_L),
 | |
| 	KEY(3, 9, KEY_RIGHTSHIFT),
 | |
| 	KEY(4, 0, CORGI_KEY_ADDRESS),
 | |
| 	KEY(4, 1, KEY_A),
 | |
| 	KEY(4, 2, KEY_D),
 | |
| 	KEY(4, 3, KEY_C),
 | |
| 	KEY(4, 4, KEY_B),
 | |
| 	KEY(4, 5, KEY_N),
 | |
| 	KEY(4, 6, KEY_DOT),
 | |
| 	KEY(4, 8, KEY_ENTER),
 | |
| 	KEY(4, 10, KEY_LEFTSHIFT),
 | |
| 	KEY(5, 0, CORGI_KEY_MAIL),
 | |
| 	KEY(5, 1, KEY_Z),
 | |
| 	KEY(5, 2, KEY_X),
 | |
| 	KEY(5, 3, KEY_MINUS),
 | |
| 	KEY(5, 4, KEY_SPACE),
 | |
| 	KEY(5, 5, KEY_COMMA),
 | |
| 	KEY(5, 7, KEY_UP),
 | |
| 	KEY(5, 11, CORGI_KEY_FN),
 | |
| 	KEY(6, 0, KEY_SYSRQ),
 | |
| 	KEY(6, 1, CORGI_KEY_JAP1),
 | |
| 	KEY(6, 2, CORGI_KEY_JAP2),
 | |
| 	KEY(6, 3, CORGI_KEY_CANCEL),
 | |
| 	KEY(6, 4, CORGI_KEY_OK),
 | |
| 	KEY(6, 5, CORGI_KEY_MENU),
 | |
| 	KEY(6, 6, KEY_LEFT),
 | |
| 	KEY(6, 7, KEY_DOWN),
 | |
| 	KEY(6, 8, KEY_RIGHT),
 | |
| 	KEY(7, 0, CORGI_KEY_OFF),
 | |
| 	KEY(7, 1, CORGI_KEY_EXOK),
 | |
| 	KEY(7, 2, CORGI_KEY_EXCANCEL),
 | |
| 	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
 | |
| 	KEY(7, 4, CORGI_KEY_EXJOGUP),
 | |
| };
 | |
| 
 | |
| static struct matrix_keymap_data corgikbd_keymap_data = {
 | |
| 	.keymap		= corgikbd_keymap,
 | |
| 	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
 | |
| };
 | |
| 
 | |
| static const int corgikbd_row_gpios[] =
 | |
| 		{ 58, 59, 60, 61, 62, 63, 64, 65 };
 | |
| static const int corgikbd_col_gpios[] =
 | |
| 		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
 | |
| 
 | |
| static struct matrix_keypad_platform_data corgikbd_pdata = {
 | |
| 	.keymap_data		= &corgikbd_keymap_data,
 | |
| 	.row_gpios		= corgikbd_row_gpios,
 | |
| 	.col_gpios		= corgikbd_col_gpios,
 | |
| 	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
 | |
| 	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
 | |
| 	.col_scan_delay_us	= 10,
 | |
| 	.debounce_ms		= 10,
 | |
| 	.wakeup			= 1,
 | |
| };
 | |
| 
 | |
| static struct platform_device corgikbd_device = {
 | |
| 	.name		= "matrix-keypad",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 		.platform_data = &corgikbd_pdata,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Corgi LEDs
 | |
|  */
 | |
| static struct gpio_led corgi_gpio_leds[] = {
 | |
| 	{
 | |
| 		.name			= "corgi:amber:charge",
 | |
| 		.default_trigger	= "sharpsl-charge",
 | |
| 		.gpio			= CORGI_GPIO_LED_ORANGE,
 | |
| 	},
 | |
| 	{
 | |
| 		.name			= "corgi:green:mail",
 | |
| 		.default_trigger	= "nand-disk",
 | |
| 		.gpio			= CORGI_GPIO_LED_GREEN,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct gpio_led_platform_data corgi_gpio_leds_info = {
 | |
| 	.leds		= corgi_gpio_leds,
 | |
| 	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
 | |
| };
 | |
| 
 | |
| static struct platform_device corgiled_device = {
 | |
| 	.name		= "leds-gpio",
 | |
| 	.id		= -1,
 | |
| 	.dev		= {
 | |
| 		.platform_data = &corgi_gpio_leds_info,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * MMC/SD Device
 | |
|  *
 | |
|  * The card detect interrupt isn't debounced so we delay it by 250ms
 | |
|  * to give the card a chance to fully insert/eject.
 | |
|  */
 | |
| static struct pxamci_platform_data corgi_mci_platform_data = {
 | |
| 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 | |
| 	.gpio_card_detect	= -1,
 | |
| 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 | |
| 	.gpio_power		= CORGI_GPIO_SD_PWR,
 | |
| };
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * Irda
 | |
|  */
 | |
| static struct pxaficp_platform_data corgi_ficp_platform_data = {
 | |
| 	.gpio_pwdown		= CORGI_GPIO_IR_ON,
 | |
| 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 | |
| };
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * USB Device Controller
 | |
|  */
 | |
| static struct pxa2xx_udc_mach_info udc_info __initdata = {
 | |
| 	/* no connect GPIO; corgi can't tell connection status */
 | |
| 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 | |
| };
 | |
| 
 | |
| #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
 | |
| static struct pxa2xx_spi_master corgi_spi_info = {
 | |
| 	.num_chipselect	= 3,
 | |
| };
 | |
| 
 | |
| static void corgi_wait_for_hsync(void)
 | |
| {
 | |
| 	while (gpio_get_value(CORGI_GPIO_HSYNC))
 | |
| 		cpu_relax();
 | |
| 
 | |
| 	while (!gpio_get_value(CORGI_GPIO_HSYNC))
 | |
| 		cpu_relax();
 | |
| }
 | |
| 
 | |
| static struct ads7846_platform_data corgi_ads7846_info = {
 | |
| 	.model			= 7846,
 | |
| 	.vref_delay_usecs	= 100,
 | |
| 	.x_plate_ohms		= 419,
 | |
| 	.y_plate_ohms		= 486,
 | |
| 	.gpio_pendown		= CORGI_GPIO_TP_INT,
 | |
| 	.wait_for_sync		= corgi_wait_for_hsync,
 | |
| };
 | |
| 
 | |
| static struct pxa2xx_spi_chip corgi_ads7846_chip = {
 | |
| 	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
 | |
| };
 | |
| 
 | |
| static void corgi_bl_kick_battery(void)
 | |
| {
 | |
| 	void (*kick_batt)(void);
 | |
| 
 | |
| 	kick_batt = symbol_get(sharpsl_battery_kick);
 | |
| 	if (kick_batt) {
 | |
| 		kick_batt();
 | |
| 		symbol_put(sharpsl_battery_kick);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 | |
| 	.init_mode		= CORGI_LCD_MODE_VGA,
 | |
| 	.max_intensity		= 0x2f,
 | |
| 	.default_intensity	= 0x1f,
 | |
| 	.limit_mask		= 0x0b,
 | |
| 	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
 | |
| 	.gpio_backlight_on	= -1,
 | |
| 	.kick_battery		= corgi_bl_kick_battery,
 | |
| };
 | |
| 
 | |
| static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
 | |
| 	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
 | |
| };
 | |
| 
 | |
| static struct pxa2xx_spi_chip corgi_max1111_chip = {
 | |
| 	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
 | |
| };
 | |
| 
 | |
| static struct spi_board_info corgi_spi_devices[] = {
 | |
| 	{
 | |
| 		.modalias	= "ads7846",
 | |
| 		.max_speed_hz	= 1200000,
 | |
| 		.bus_num	= 1,
 | |
| 		.chip_select	= 0,
 | |
| 		.platform_data	= &corgi_ads7846_info,
 | |
| 		.controller_data= &corgi_ads7846_chip,
 | |
| 		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
 | |
| 	}, {
 | |
| 		.modalias	= "corgi-lcd",
 | |
| 		.max_speed_hz	= 50000,
 | |
| 		.bus_num	= 1,
 | |
| 		.chip_select	= 1,
 | |
| 		.platform_data	= &corgi_lcdcon_info,
 | |
| 		.controller_data= &corgi_lcdcon_chip,
 | |
| 	}, {
 | |
| 		.modalias	= "max1111",
 | |
| 		.max_speed_hz	= 450000,
 | |
| 		.bus_num	= 1,
 | |
| 		.chip_select	= 2,
 | |
| 		.controller_data= &corgi_max1111_chip,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static void __init corgi_init_spi(void)
 | |
| {
 | |
| 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 | |
| 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
 | |
| }
 | |
| #else
 | |
| static inline void corgi_init_spi(void) {}
 | |
| #endif
 | |
| 
 | |
| static struct mtd_partition sharpsl_nand_partitions[] = {
 | |
| 	{
 | |
| 		.name = "System Area",
 | |
| 		.offset = 0,
 | |
| 		.size = 7 * 1024 * 1024,
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "Root Filesystem",
 | |
| 		.offset = 7 * 1024 * 1024,
 | |
| 		.size = 25 * 1024 * 1024,
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "Home Filesystem",
 | |
| 		.offset = MTDPART_OFS_APPEND,
 | |
| 		.size = MTDPART_SIZ_FULL,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 | |
| 
 | |
| static struct nand_bbt_descr sharpsl_bbt = {
 | |
| 	.options = 0,
 | |
| 	.offs = 4,
 | |
| 	.len = 2,
 | |
| 	.pattern = scan_ff_pattern
 | |
| };
 | |
| 
 | |
| static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
 | |
| 	.badblock_pattern	= &sharpsl_bbt,
 | |
| 	.partitions		= sharpsl_nand_partitions,
 | |
| 	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
 | |
| };
 | |
| 
 | |
| static struct resource sharpsl_nand_resources[] = {
 | |
| 	{
 | |
| 		.start	= 0x0C000000,
 | |
| 		.end	= 0x0C000FFF,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device sharpsl_nand_device = {
 | |
| 	.name		= "sharpsl-nand",
 | |
| 	.id		= -1,
 | |
| 	.resource	= sharpsl_nand_resources,
 | |
| 	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
 | |
| 	.dev.platform_data	= &sharpsl_nand_platform_data,
 | |
| };
 | |
| 
 | |
| static struct mtd_partition sharpsl_rom_parts[] = {
 | |
| 	{
 | |
| 		.name	="Boot PROM Filesystem",
 | |
| 		.offset	= 0x00120000,
 | |
| 		.size	= MTDPART_SIZ_FULL,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct physmap_flash_data sharpsl_rom_data = {
 | |
| 	.width		= 2,
 | |
| 	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
 | |
| 	.parts		= sharpsl_rom_parts,
 | |
| };
 | |
| 
 | |
| static struct resource sharpsl_rom_resources[] = {
 | |
| 	{
 | |
| 		.start	= 0x00000000,
 | |
| 		.end	= 0x007fffff,
 | |
| 		.flags	= IORESOURCE_MEM,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct platform_device sharpsl_rom_device = {
 | |
| 	.name	= "physmap-flash",
 | |
| 	.id	= -1,
 | |
| 	.resource = sharpsl_rom_resources,
 | |
| 	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
 | |
| 	.dev.platform_data = &sharpsl_rom_data,
 | |
| };
 | |
| 
 | |
| static struct platform_device *devices[] __initdata = {
 | |
| 	&corgiscoop_device,
 | |
| 	&corgifb_device,
 | |
| 	&corgikbd_device,
 | |
| 	&corgiled_device,
 | |
| 	&sharpsl_nand_device,
 | |
| 	&sharpsl_rom_device,
 | |
| };
 | |
| 
 | |
| static struct i2c_board_info __initdata corgi_i2c_devices[] = {
 | |
| 	{ I2C_BOARD_INFO("wm8731", 0x1b) },
 | |
| };
 | |
| 
 | |
| static void corgi_poweroff(void)
 | |
| {
 | |
| 	if (!machine_is_corgi())
 | |
| 		/* Green LED off tells the bootloader to halt */
 | |
| 		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
 | |
| 
 | |
| 	arm_machine_restart('h', NULL);
 | |
| }
 | |
| 
 | |
| static void corgi_restart(char mode, const char *cmd)
 | |
| {
 | |
| 	if (!machine_is_corgi())
 | |
| 		/* Green LED on tells the bootloader to reboot */
 | |
| 		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
 | |
| 
 | |
| 	arm_machine_restart('h', cmd);
 | |
| }
 | |
| 
 | |
| static void __init corgi_init(void)
 | |
| {
 | |
| 	pm_power_off = corgi_poweroff;
 | |
| 	arm_pm_restart = corgi_restart;
 | |
| 
 | |
| 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 | |
| 	PCFR |= PCFR_OPDE;
 | |
| 
 | |
| 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 | |
| 
 | |
| 	corgi_init_spi();
 | |
| 
 | |
|  	pxa_set_udc_info(&udc_info);
 | |
| 	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 | |
| 	pxa_set_mci_info(&corgi_mci_platform_data);
 | |
| 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 | |
| 	pxa_set_i2c_info(NULL);
 | |
| 	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
 | |
| 
 | |
| 	platform_scoop_config = &corgi_pcmcia_config;
 | |
| 
 | |
| 	if (machine_is_husky())
 | |
| 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 | |
| 
 | |
| 	platform_add_devices(devices, ARRAY_SIZE(devices));
 | |
| }
 | |
| 
 | |
| static void __init fixup_corgi(struct machine_desc *desc,
 | |
| 		struct tag *tags, char **cmdline, struct meminfo *mi)
 | |
| {
 | |
| 	sharpsl_save_param();
 | |
| 	mi->nr_banks=1;
 | |
| 	mi->bank[0].start = 0xa0000000;
 | |
| 	mi->bank[0].node = 0;
 | |
| 	if (machine_is_corgi())
 | |
| 		mi->bank[0].size = (32*1024*1024);
 | |
| 	else
 | |
| 		mi->bank[0].size = (64*1024*1024);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_MACH_CORGI
 | |
| MACHINE_START(CORGI, "SHARP Corgi")
 | |
| 	.phys_io	= 0x40000000,
 | |
| 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 | |
| 	.fixup		= fixup_corgi,
 | |
| 	.map_io		= pxa_map_io,
 | |
| 	.init_irq	= pxa25x_init_irq,
 | |
| 	.init_machine	= corgi_init,
 | |
| 	.timer		= &pxa_timer,
 | |
| MACHINE_END
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_MACH_SHEPHERD
 | |
| MACHINE_START(SHEPHERD, "SHARP Shepherd")
 | |
| 	.phys_io	= 0x40000000,
 | |
| 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 | |
| 	.fixup		= fixup_corgi,
 | |
| 	.map_io		= pxa_map_io,
 | |
| 	.init_irq	= pxa25x_init_irq,
 | |
| 	.init_machine	= corgi_init,
 | |
| 	.timer		= &pxa_timer,
 | |
| MACHINE_END
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_MACH_HUSKY
 | |
| MACHINE_START(HUSKY, "SHARP Husky")
 | |
| 	.phys_io	= 0x40000000,
 | |
| 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 | |
| 	.fixup		= fixup_corgi,
 | |
| 	.map_io		= pxa_map_io,
 | |
| 	.init_irq	= pxa25x_init_irq,
 | |
| 	.init_machine	= corgi_init,
 | |
| 	.timer		= &pxa_timer,
 | |
| MACHINE_END
 | |
| #endif
 | |
| 
 |