247 lines
6.4 KiB
C
247 lines
6.4 KiB
C
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/amigahw.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "wd33c93.h"
|
|
#include "a3000.h"
|
|
|
|
#include<linux/stat.h>
|
|
|
|
#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
|
|
#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
|
|
|
|
static struct Scsi_Host *a3000_host = NULL;
|
|
|
|
static int a3000_release(struct Scsi_Host *instance);
|
|
|
|
static irqreturn_t a3000_intr (int irq, void *dummy)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int status = DMA(a3000_host)->ISTR;
|
|
|
|
if (!(status & ISTR_INT_P))
|
|
return IRQ_NONE;
|
|
if (status & ISTR_INTS)
|
|
{
|
|
spin_lock_irqsave(a3000_host->host_lock, flags);
|
|
wd33c93_intr (a3000_host);
|
|
spin_unlock_irqrestore(a3000_host->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
|
|
{
|
|
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
|
|
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
|
|
|
|
/*
|
|
* if the physical address has the wrong alignment, or if
|
|
* physical address is bad, or if it is a write and at the
|
|
* end of a physical memory chunk, then allocate a bounce
|
|
* buffer
|
|
*/
|
|
if (addr & A3000_XFER_MASK)
|
|
{
|
|
HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
|
|
& ~0x1ff;
|
|
HDATA(a3000_host)->dma_bounce_buffer =
|
|
kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL);
|
|
|
|
/* can't allocate memory; use PIO */
|
|
if (!HDATA(a3000_host)->dma_bounce_buffer) {
|
|
HDATA(a3000_host)->dma_bounce_len = 0;
|
|
return 1;
|
|
}
|
|
|
|
if (!dir_in) {
|
|
/* copy to bounce buffer for a write */
|
|
memcpy (HDATA(a3000_host)->dma_bounce_buffer,
|
|
cmd->SCp.ptr, cmd->SCp.this_residual);
|
|
}
|
|
|
|
addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer);
|
|
}
|
|
|
|
/* setup dma direction */
|
|
if (!dir_in)
|
|
cntr |= CNTR_DDIR;
|
|
|
|
/* remember direction */
|
|
HDATA(a3000_host)->dma_dir = dir_in;
|
|
|
|
DMA(a3000_host)->CNTR = cntr;
|
|
|
|
/* setup DMA *physical* address */
|
|
DMA(a3000_host)->ACR = addr;
|
|
|
|
if (dir_in)
|
|
/* invalidate any cache */
|
|
cache_clear (addr, cmd->SCp.this_residual);
|
|
else
|
|
/* push any dirty cache */
|
|
cache_push (addr, cmd->SCp.this_residual);
|
|
|
|
/* start DMA */
|
|
mb(); /* make sure setup is completed */
|
|
DMA(a3000_host)->ST_DMA = 1;
|
|
mb(); /* make sure DMA has started before next IO */
|
|
|
|
/* return success */
|
|
return 0;
|
|
}
|
|
|
|
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
|
|
int status)
|
|
{
|
|
/* disable SCSI interrupts */
|
|
unsigned short cntr = CNTR_PDMD;
|
|
|
|
if (!HDATA(instance)->dma_dir)
|
|
cntr |= CNTR_DDIR;
|
|
|
|
DMA(instance)->CNTR = cntr;
|
|
mb(); /* make sure CNTR is updated before next IO */
|
|
|
|
/* flush if we were reading */
|
|
if (HDATA(instance)->dma_dir) {
|
|
DMA(instance)->FLUSH = 1;
|
|
mb(); /* don't allow prefetch */
|
|
while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
|
|
barrier();
|
|
mb(); /* no IO until FLUSH is done */
|
|
}
|
|
|
|
/* clear a possible interrupt */
|
|
/* I think that this CINT is only necessary if you are
|
|
* using the terminal count features. HM 7 Mar 1994
|
|
*/
|
|
DMA(instance)->CINT = 1;
|
|
|
|
/* stop DMA */
|
|
DMA(instance)->SP_DMA = 1;
|
|
mb(); /* make sure DMA is stopped before next IO */
|
|
|
|
/* restore the CONTROL bits (minus the direction flag) */
|
|
DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
|
|
mb(); /* make sure CNTR is updated before next IO */
|
|
|
|
/* copy from a bounce buffer, if necessary */
|
|
if (status && HDATA(instance)->dma_bounce_buffer) {
|
|
if (SCpnt) {
|
|
if (HDATA(instance)->dma_dir && SCpnt)
|
|
memcpy (SCpnt->SCp.ptr,
|
|
HDATA(instance)->dma_bounce_buffer,
|
|
SCpnt->SCp.this_residual);
|
|
kfree (HDATA(instance)->dma_bounce_buffer);
|
|
HDATA(instance)->dma_bounce_buffer = NULL;
|
|
HDATA(instance)->dma_bounce_len = 0;
|
|
} else {
|
|
kfree (HDATA(instance)->dma_bounce_buffer);
|
|
HDATA(instance)->dma_bounce_buffer = NULL;
|
|
HDATA(instance)->dma_bounce_len = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init a3000_detect(struct scsi_host_template *tpnt)
|
|
{
|
|
wd33c93_regs regs;
|
|
|
|
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
|
|
return 0;
|
|
if (!request_mem_region(0xDD0000, 256, "wd33c93"))
|
|
return 0;
|
|
|
|
tpnt->proc_name = "A3000";
|
|
tpnt->proc_info = &wd33c93_proc_info;
|
|
|
|
a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata));
|
|
if (a3000_host == NULL)
|
|
goto fail_register;
|
|
|
|
a3000_host->base = ZTWO_VADDR(0xDD0000);
|
|
a3000_host->irq = IRQ_AMIGA_PORTS;
|
|
DMA(a3000_host)->DAWR = DAWR_A3000;
|
|
regs.SASR = &(DMA(a3000_host)->SASR);
|
|
regs.SCMD = &(DMA(a3000_host)->SCMD);
|
|
HDATA(a3000_host)->no_sync = 0xff;
|
|
HDATA(a3000_host)->fast = 0;
|
|
HDATA(a3000_host)->dma_mode = CTRL_DMA;
|
|
wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
|
|
if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
|
|
a3000_intr))
|
|
goto fail_irq;
|
|
DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
|
|
|
|
return 1;
|
|
|
|
fail_irq:
|
|
wd33c93_release();
|
|
scsi_unregister(a3000_host);
|
|
fail_register:
|
|
release_mem_region(0xDD0000, 256);
|
|
return 0;
|
|
}
|
|
|
|
static int a3000_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
/* FIXME perform bus-specific reset */
|
|
|
|
/* FIXME 2: kill this entire function, which should
|
|
cause mid-layer to call wd33c93_host_reset anyway? */
|
|
|
|
spin_lock_irq(cmd->device->host->host_lock);
|
|
wd33c93_host_reset(cmd);
|
|
spin_unlock_irq(cmd->device->host->host_lock);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
#define HOSTS_C
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.proc_name = "A3000",
|
|
.name = "Amiga 3000 built-in SCSI",
|
|
.detect = a3000_detect,
|
|
.release = a3000_release,
|
|
.queuecommand = wd33c93_queuecommand,
|
|
.eh_abort_handler = wd33c93_abort,
|
|
.eh_bus_reset_handler = a3000_bus_reset,
|
|
.eh_host_reset_handler = wd33c93_host_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.use_clustering = ENABLE_CLUSTERING
|
|
};
|
|
|
|
|
|
#include "scsi_module.c"
|
|
|
|
static int a3000_release(struct Scsi_Host *instance)
|
|
{
|
|
wd33c93_release();
|
|
DMA(instance)->CNTR = 0;
|
|
release_mem_region(0xDD0000, 256);
|
|
free_irq(IRQ_AMIGA_PORTS, a3000_intr);
|
|
return 1;
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|