android_kernel_cmhtcleo/arch/arm/plat-omap/fb.c
2010-08-27 11:19:57 +02:00

344 lines
8.9 KiB
C

/*
* File: arch/arm/plat-omap/fb.c
*
* Framebuffer device registration for TI OMAP platforms
*
* Copyright (C) 2006 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/sram.h>
#include <mach/omapfb.h>
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static struct omapfb_platform_data omapfb_config;
static int config_invalid;
static int configured_regions;
static u64 omap_fb_dma_mask = ~(u32)0;
static struct platform_device omap_fb_device = {
.name = "omapfb",
.id = -1,
.dev = {
.dma_mask = &omap_fb_dma_mask,
.coherent_dma_mask = ~(u32)0,
.platform_data = &omapfb_config,
},
.num_resources = 0,
};
static inline int ranges_overlap(unsigned long start1, unsigned long size1,
unsigned long start2, unsigned long size2)
{
return (start1 >= start2 && start1 < start2 + size2) ||
(start2 >= start1 && start2 < start1 + size1);
}
static inline int range_included(unsigned long start1, unsigned long size1,
unsigned long start2, unsigned long size2)
{
return start1 >= start2 && start1 + size1 <= start2 + size2;
}
/* Check if there is an overlapping region. */
static int fbmem_region_reserved(unsigned long start, size_t size)
{
struct omapfb_mem_region *rg;
int i;
rg = &omapfb_config.mem_desc.region[0];
for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
if (!rg->paddr)
/* Empty slot. */
continue;
if (ranges_overlap(start, size, rg->paddr, rg->size))
return 1;
}
return 0;
}
/*
* Get the region_idx`th region from board config/ATAG and convert it to
* our internal format.
*/
static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
{
const struct omap_fbmem_config *conf;
u32 paddr;
conf = omap_get_nr_config(OMAP_TAG_FBMEM,
struct omap_fbmem_config, region_idx);
if (conf == NULL)
return -ENOENT;
paddr = conf->start;
/*
* Low bits encode the page allocation mode, if high bits
* are zero. Otherwise we need a page aligned fixed
* address.
*/
memset(rg, 0, sizeof(*rg));
rg->type = paddr & ~PAGE_MASK;
rg->paddr = paddr & PAGE_MASK;
rg->size = PAGE_ALIGN(conf->size);
return 0;
}
static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
unsigned long mem_start,
unsigned long mem_size)
{
/*
* Check if the configuration specifies the type explicitly.
* type = 0 && paddr = 0, a default don't care case maps to
* the SDRAM type.
*/
if (rg->type || (!rg->type && !rg->paddr))
return 0;
if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
rg->type = mem_type;
return 0;
}
/* Can't determine it. */
return -1;
}
static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
unsigned long start_avail, unsigned size_avail)
{
unsigned long paddr = rg->paddr;
size_t size = rg->size;
if (rg->type > OMAPFB_MEMTYPE_MAX) {
printk(KERN_ERR
"Invalid start address for FB region %d\n", region_idx);
return -EINVAL;
}
if (!rg->size) {
printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
return -EINVAL;
}
if (!paddr)
/* Allocate this dynamically, leave paddr 0 for now. */
return 0;
/*
* Fixed region for the given RAM range. Check if it's already
* reserved by the FB code or someone else.
*/
if (fbmem_region_reserved(paddr, size) ||
!range_included(paddr, size, start_avail, size_avail)) {
printk(KERN_ERR "Trying to use reserved memory "
"for FB region %d\n", region_idx);
return -EINVAL;
}
return 0;
}
/*
* Called from map_io. We need to call to this early enough so that we
* can reserve the fixed SDRAM regions before VM could get hold of them.
*/
void __init omapfb_reserve_sdram(void)
{
struct bootmem_data *bdata;
unsigned long sdram_start, sdram_size;
unsigned long reserved;
int i;
if (config_invalid)
return;
bdata = NODE_DATA(0)->bdata;
sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
reserved = 0;
for (i = 0; ; i++) {
struct omapfb_mem_region rg;
if (get_fbmem_region(i, &rg) < 0)
break;
if (i == OMAPFB_PLANE_NUM) {
printk(KERN_ERR
"Extraneous FB mem configuration entries\n");
config_invalid = 1;
return;
}
/* Check if it's our memory type. */
if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
sdram_start, sdram_size) < 0 ||
(rg.type != OMAPFB_MEMTYPE_SDRAM))
continue;
BUG_ON(omapfb_config.mem_desc.region[i].size);
if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
config_invalid = 1;
return;
}
if (rg.paddr) {
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
reserved += rg.size;
}
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
omapfb_config.mem_desc.region_cnt = i;
if (reserved)
pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
reserved);
}
/*
* Called at sram init time, before anything is pushed to the SRAM stack.
* Because of the stack scheme, we will allocate everything from the
* start of the lowest address region to the end of SRAM. This will also
* include padding for page alignment and possible holes between regions.
*
* As opposed to the SDRAM case, we'll also do any dynamic allocations at
* this point, since the driver built as a module would have problem with
* freeing / reallocating the regions.
*/
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
unsigned long pstart_avail,
unsigned long size_avail)
{
struct omapfb_mem_region rg;
unsigned long pend_avail;
unsigned long reserved;
int i;
if (config_invalid)
return 0;
reserved = 0;
pend_avail = pstart_avail + size_avail;
for (i = 0; ; i++) {
if (get_fbmem_region(i, &rg) < 0)
break;
if (i == OMAPFB_PLANE_NUM) {
printk(KERN_ERR
"Extraneous FB mem configuration entries\n");
config_invalid = 1;
return 0;
}
/* Check if it's our memory type. */
if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
sram_pstart, sram_size) < 0 ||
(rg.type != OMAPFB_MEMTYPE_SRAM))
continue;
BUG_ON(omapfb_config.mem_desc.region[i].size);
if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
config_invalid = 1;
return 0;
}
if (!rg.paddr) {
/* Dynamic allocation */
if ((size_avail & PAGE_MASK) < rg.size) {
printk("Not enough SRAM for FB region %d\n",
i);
config_invalid = 1;
return 0;
}
size_avail = (size_avail - rg.size) & PAGE_MASK;
rg.paddr = pstart_avail + size_avail;
}
/* Reserve everything above the start of the region. */
if (pend_avail - rg.paddr > reserved)
reserved = pend_avail - rg.paddr;
size_avail = pend_avail - reserved - pstart_avail;
/*
* We have a kernel mapping for this already, so the
* driver won't have to make one.
*/
rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
omapfb_config.mem_desc.region_cnt = i;
if (reserved)
pr_info("Reserving %lu bytes SRAM for frame buffer\n",
reserved);
return reserved;
}
void omapfb_set_ctrl_platform_data(void *data)
{
omapfb_config.ctrl_platform_data = data;
}
static inline int omap_init_fb(void)
{
const struct omap_lcd_config *conf;
if (config_invalid)
return 0;
if (configured_regions != omapfb_config.mem_desc.region_cnt) {
printk(KERN_ERR "Invalid FB mem configuration entries\n");
return 0;
}
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf == NULL) {
if (configured_regions)
/* FB mem config, but no LCD config? */
printk(KERN_ERR "Missing LCD configuration\n");
return 0;
}
omapfb_config.lcd = *conf;
return platform_device_register(&omap_fb_device);
}
arch_initcall(omap_init_fb);
#else
void omapfb_reserve_sdram(void) {}
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
unsigned long start_avail,
unsigned long size_avail)
{
return 0;
}
#endif