if ARCH_MSM choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" select ARCH_MSM_ARM11 select CPU_V6 config ARCH_MSM7225 bool "Qualcomm MSM7225" select ARCH_MSM_ARM11 select CPU_V6 config ARCH_MSM7227 bool "Qualcomm MSM7227" select ARCH_MSM_ARM11 select CPU_V6 config ARCH_MSM7X30 bool "MSM7x30" select ARCH_MSM_SCORPION select CPU_V7 config ARCH_QSD8X50 bool "QSD8x50" select ARCH_MSM_SCORPION select CPU_V7 select VERIFY_PERMISSION_FAULT endchoice config ARCH_MSM_ARM11 bool config ARCH_MSM_SCORPION bool config MSM_MDP22 bool depends on ARCH_MSM7X00A default y config MSM_MDP30 bool depends on ARCH_MSM7225 default y config MSM_MDP302 bool depends on ARCH_MSM7227 default y config MSM_MDP31 bool depends on ARCH_QSD8X50 || ARCH_MSM7X30 default y config MSM_MDP40 bool depends on ARCH_MSM7X30 default y config TURBO_MODE bool "Turbo mode" depends on ARCH_MSM7225 || ARCH_MSM7X00A default n help This option is used to indicate hardware support for running the memory bus at a higher speed.(only for 7X00A/7225) config PERFLOCK depends on CPU_FREQ depends on ARCH_QSD8X50 || ARCH_MSM7X30 || ARCH_MSM7X00A || ARCH_MSM7227 || ARCH_MSM7225 default n bool "HTC Performance Lock" config PERFLOCK_BOOT_LOCK depends on PERFLOCK depends on ARCH_QSD8X50 || ARCH_MSM7X30 || ARCH_MSM7X00A || ARCH_MSM7227 || ARCH_MSM7225 default n bool "Boot Time Performance Lock" config PERFLOCK_SCREEN_POLICY depends on PERFLOCK depends on ARCH_QSD8X50 || ARCH_MSM7X00A || ARCH_MSM7227 || ARCH_MSM7225 default n bool "Change Cpufreq Policy while Screen ON/OFF" config PERFLOCK_SCREEN_ON_MIN depends on PERFLOCK_SCREEN_POLICY int "Minimum speed while screen on" default MSM_CPU_FREQ_ONDEMAND_MIN config PERFLOCK_SCREEN_ON_MAX depends on PERFLOCK_SCREEN_POLICY int "Maximum speed while screen on" default MSM_CPU_FREQ_ONDEMAND_MAX config PERFLOCK_SCREEN_OFF_MIN depends on PERFLOCK_SCREEN_POLICY int "Minimum speed while screen off" default MSM_CPU_FREQ_ONDEMAND_MIN config PERFLOCK_SCREEN_OFF_MAX depends on PERFLOCK_SCREEN_POLICY int "Maximum speed while screen off" default MSM_CPU_FREQ_ONDEMAND_MIN config MSM_AMSS_VERSION int default 6210 if MSM_AMSS_VERSION_6210 default 6220 if MSM_AMSS_VERSION_6220 default 6225 if MSM_AMSS_VERSION_6225 default 6350 if MSM_AMSS_VERSION_6350 default 6355 if MSM_AMSS_VERSION_6355 default 1355 if MSM_AMSS_VERSION_1355 default 4725 if MSM_AMSS_VERSION_4725 default 4735 if MSM_AMSS_VERSION_4735 default 4410 if MSM_AMSS_VERSION_4410 default 3200 if MSM_AMSS_VERSION_3200 default 1170 if MSM_AMSS_VERSION_1170 default 1200 if MSM_AMSS_VERSION_1200 default 1550 if MSM_AMSS_VERSION_1550 choice prompt "AMSS modem firmware version" default MSM_AMSS_VERSION_6225 config MSM_AMSS_VERSION_6210 bool "6.2.10" config MSM_AMSS_VERSION_6220 bool "6.2.20" config MSM_AMSS_VERSION_6225 bool "6.2.20 + New ADSP" config MSM_AMSS_VERSION_6350 bool "6.3.50" config MSM_AMSS_VERSION_6355 bool "6.3.55" config MSM_AMSS_VERSION_1355 bool "1.3.55" config MSM_AMSS_VERSION_4725 bool "4.7.25" config MSM_AMSS_VERSION_4735 bool "4.7.25 + SBA 3001" config MSM_AMSS_VERSION_4410 bool "4.4.10" config MSM_AMSS_VERSION_3200 bool "3.2.00" config MSM_AMSS_VERSION_1170 bool "1.1.70" config MSM_AMSS_VERSION_1200 bool "1.2.00" config MSM_AMSS_VERSION_1550 bool "1.5.50" endchoice config MSM_DEBUG_UART int default 1 if MSM_DEBUG_UART1 default 2 if MSM_DEBUG_UART2 default 3 if MSM_DEBUG_UART3 choice prompt "Debug UART" default MSM_DEBUG_UART_NONE config MSM_DEBUG_UART_NONE bool "None" config MSM_DEBUG_UART1 bool "UART1" config MSM_DEBUG_UART2 bool "UART2" config MSM_DEBUG_UART3 bool "UART3" endchoice config ARCH_MSM7230 bool "MSM7230" depends on ARCH_MSM7X30 config ARCH_MSM7630 bool "MSM7630" depends on ARCH_MSM7X30 comment "MSM Board Type" config MACH_HALIBUT depends on ARCH_MSM7X00A default n bool "Halibut Board (QCT SURF7201A)" help Support for the Qualcomm SURF7201A eval board. config MACH_TROUT depends on ARCH_MSM7X00A default n bool "Trout (HTC Dream, T-Mobile G1, Google ADP1)" help Select this to support HTC Dream, T-Mobile G1, Google ADP1. config MACH_SWORDFISH depends on ARCH_QSD8X50 default n bool "Swordfish Board (QCT SURF8250)" help Support for the Qualcomm SURF8250 eval board. config MACH_SAPPHIRE depends on ARCH_MSM7X00A default n bool "Sapphire" help Support for the HTC Sapphire device. config MACH_HERO depends on ARCH_MSM7X00A default n bool "Hero" help Support for the HTC Hero device. config MACH_DESIREC depends on ARCH_MSM7X00A default n bool "Hero" help Support for the HTC DesireC device. config MACH_HEROC depends on ARCH_MSM7X00A default n bool "Hero" help Support for the HTC HeroC device. config MACH_ORCA depends on ARCH_QSD8X50 default n bool "Orca" help Select this to support the Orca device config MACH_MAHIMAHI depends on ARCH_QSD8X50 default n bool "Mahi-Mahi" help Select this to support the Mahi-Mahi device config MACH_BRAVO depends on ARCH_QSD8X50 default n bool "Bravo" help Select this to support the Bravo device config MACH_HTCLEO depends on ARCH_QSD8X50 default y bool "HTC Leo" help Select this to support the HTC Leo device config USING_BRAVOS_DSP depends on MACH_HTCLEO default n bool "Bravos DSP for Leo" help Enable this if you use Bravos DSP on a Leo config HTCLEO_BLINK_AT_BOOT depends on MACH_HTCLEO default n bool "Blink flash at boot" help Blink flash led during hardware init config HTCLEO_BTN_BACKLIGHT_MANAGER depends on MACH_HTCLEO default y bool "Use button backlight manager" help Use kernel button backlight manager to turn on/off backlight config MACH_PASSIONC depends on ARCH_QSD8X50 default n bool "PassionC" help Select this to support the PassionC device config MACH_BRAVOC depends on ARCH_QSD8X50 default n bool "BravoC" help Select this to support the BravoC device config MACH_INCREDIBLE depends on ARCH_QSD8X50 default n bool "Incredible" help Select this to support the Incredible device config MACH_INCREDIBLEC depends on ARCH_QSD8X50 default n bool "IncredibleC" help Select this to support the IncredibleC device config MACH_SUPERSONIC depends on ARCH_QSD8X50 default n bool "Supersonic" help Select this to support the Supersonic device config MACH_BEE depends on ARCH_MSM7225 default n bool "Bee" help Support for Bee (PDA phone). config MACH_BUZZ depends on ARCH_MSM7225 default n bool "Buzz" help Support for Buzz (PDA phone). config MACH_BUZZC depends on ARCH_MSM7225 default n bool "Buzzc" help Support for Buzzc (PDA phone). config MACH_PARADISE depends on ARCH_MSM7225 default n bool "Paradise" help Support for Paradise (PDA phone). config MACH_BAHAMAS depends on ARCH_MSM7225 default n bool "Bahamas" help Support for Bahamas (PDA phone). config MACH_LEGEND depends on ARCH_MSM7227 default n bool "Legend" help Support for Legend (PDA phone). config MACH_LATTE depends on ARCH_MSM7227 default n bool "Latte" help Support for Latte (PDA phone). config MACH_LIBERTY depends on ARCH_MSM7227 default n bool "Liberty" help Support for Liberty (PDA phone). config MACH_VISION depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 VISION" help Support for the Qualcomm MSM7x30 Vision board. config MACH_LEXIKON depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 LEXIKON" help Support for the Qualcomm MSM7x30 Lexikon board. config MACH_SPEEDY depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 SPEEDY" help Support for the Qualcomm MSM7x30 Speedy board. config MACH_MECHA depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 MECHA" help Support for the Qualcomm MSM7x30 Mecha board. config MACH_BLITZC depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY depends on MACH_MECHA default n bool "MSM7x30 BLITZC" help Support for the Qualcomm MSM7x30 Blitz#C board. config MACH_GLACIER depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 GLACIER" help Support for the Qualcomm MSM7x30 Glacier board. config MACH_SPADE depends on ARCH_MSM7X30 depends on !MSM_STACKED_MEMORY default n bool "MSM7x30 SPADE" help Support for the Qualcomm MSM7x30 Spade board. config TROUT_BATTCHG depends on MACH_TROUT && POWER_SUPPLY default n bool "Trout battery / charger driver" config HTC_BATTCHG depends on MSM_ONCRPCROUTER && POWER_SUPPLY default n bool "HTC battery / charger driver" config HTC_BATTCHG_SMEM depends on HTC_BATTCHG default n bool "Read Battery Info via SMEM" config HTC_PWRSINK depends on MSM_SMD default y bool "HTC Power Sink Driver" config HTC_SLEEP_MODE_GPIO_DUMP default y bool "HTC Sleep Mode GPIO Dump" help Support for dumping GPIO status when enter suspend. config HTC_POWER_COLLAPSE_MAGIC default n bool "Check Power Collapse State" config SMEM_RPC_SERVER_STATE default n bool "Set RPC Server State in SMEM" config BUILD_OMA_DM bool "Build in OMA-DM fixes" default n help For OMA-DM we need to do some additional fixes. config CACHE_FLUSH_RANGE_LIMIT hex "Cache flush range limit" default 0x40000 help When flushing a cache range larger then this (hex) limit, flush the entire cache instead. Flushing a large range can be slower than flushing, then refilling, the entire cache. choice prompt "Default Timer" default MSM7X00A_USE_GP_TIMER config MSM7X00A_USE_GP_TIMER bool "GP Timer" help Low resolution timer that allows power collapse from idle. config MSM7X00A_USE_DG_TIMER bool "DG Timer" help High resolution timer. endchoice choice prompt "Suspend sleep mode" default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND help Allows overriding the sleep mode used. Leave at power collapse suspend unless the arm9 image has problems. config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND bool "Power collapse suspend" help Lowest sleep state. Returns through reset vector. config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE bool "Power collapse" help Sleep state that returns through reset vector. config MSM7X00A_SLEEP_MODE_APPS_SLEEP bool "Apps Sleep" config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT bool "Ramp down cpu clock and wait for interrupt" config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT bool "Wait for interrupt" endchoice config MSM7X00A_SLEEP_MODE int default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT choice prompt "Idle sleep mode" default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE help Allows overriding the sleep mode used from idle. Leave at power collapse suspend unless the arm9 image has problems. config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND bool "Power collapse suspend" help Lowest sleep state. Returns through reset vector. config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE bool "Power collapse" help Sleep state that returns through reset vector. config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP bool "Apps Sleep" config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT bool "Ramp down cpu clock and wait for interrupt" config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT bool "Wait for interrupt" endchoice config MSM7X00A_IDLE_SLEEP_MODE int default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT config MSM7X00A_IDLE_SLEEP_MIN_TIME int "Minimum idle time before sleep" default 20000000 help Minimum idle time in nanoseconds before entering low power mode. config MSM7X00A_IDLE_SPIN_TIME int "Idle spin time before cpu ramp down" default 80000 help Spin time in nanoseconds before ramping down cpu clock and entering any low power state. choice prompt "Suspend sleep limit" default MSM7X00A_SLEEP_NO_LIMIT help Allows overriding the sleep limit used. config MSM7X00A_SLEEP_NO_LIMIT bool "No sleep limit" help No limit sleep and tcxo shutdown. config MSM7X00A_SLEEP_LIMITED_SLEEP bool "Limited sleep" help Do everything except tcxo off. config MSM7X00A_SLEEP_NEGATE_SLEEP bool "No sleep" help Prevent arm9 enter sleep mode. endchoice config MSM7X00A_SLEEP_LIMIT int default 0 if MSM7X00A_SLEEP_NO_LIMIT default 1 if MSM7X00A_SLEEP_LIMITED_SLEEP default 2 if MSM7X00A_SLEEP_NEGATE_SLEEP choice prompt "Idle sleep limit" default MSM7X00A_IDLE_SLEEP_NO_LIMIT help Allows overriding the idle sleep limit used. config MSM7X00A_IDLE_SLEEP_NO_LIMIT bool "No sleep limit" help No limit sleep and tcxo shutdown. config MSM7X00A_IDLE_SLEEP_LIMITED_SLEEP bool "Limited sleep" help Do everything except tcxo off. config MSM7X00A_IDLE_SLEEP_NEGATE_SLEEP bool "No sleep" help Prevent arm9 enter sleep mode. endchoice config MSM7X00A_IDLE_SLEEP_LIMIT int default 0 if MSM7X00A_IDLE_SLEEP_NO_LIMIT default 1 if MSM7X00A_IDLE_SLEEP_LIMITED_SLEEP default 2 if MSM7X00A_IDLE_SLEEP_NEGATE_SLEEP menuconfig MSM_IDLE_STATS bool "Collect idle statistics" default y help Collect idle statistics and export them in proc/msm_pm_stats. if MSM_IDLE_STATS config MSM_IDLE_STATS_FIRST_BUCKET int "First bucket time" default 62500 help Upper time limit in nanosconds of first bucket. config MSM_IDLE_STATS_BUCKET_SHIFT int "Bucket shift" default 2 config MSM_IDLE_STATS_BUCKET_COUNT int "Bucket count" default 10 endif # MSM_IDLE_STATS config MSM_FIQ_SUPPORT default y bool "Enable installation of an FIQ handler." config MSM_SERIAL_DEBUGGER select MSM_FIQ_SUPPORT select KERNEL_DEBUGGER_CORE default n bool "FIQ Mode Serial Debugger" help The FIQ serial debugger can accept commands even when the kernel is unresponsive due to being stuck with interrupts disabled. Depends on the kernel debugger core in drivers/misc. config MSM_SERIAL_DEBUGGER_NO_SLEEP depends on MSM_SERIAL_DEBUGGER default n bool "Keep serial debugger active" help Enables the serial debugger at boot. Passing msm_serial_debugger.no_sleep on the kernel commandline will override this config option. config MSM_SERIAL_DEBUGGER_WAKEUP_IRQ_ALWAYS_ON depends on MSM_SERIAL_DEBUGGER default n bool "Don't disable wakeup IRQ when debugger is active" help Don't disable the wakeup irq when enabling the uart clock. This will cause extra interrupts, but it makes the serial debugger usable with radio builds that ignore the uart clock request in power collapse. config MSM_SERIAL_DEBUGGER_CONSOLE depends on MSM_SERIAL_DEBUGGER default n bool "Console on FIQ Serial Debugger port" help Enables a console so that printk messages are displayed on the debugger serial port as the occur. config MSM_SMD default y bool "MSM Shared Memory Driver (SMD)" help Support for the shared memory interface between the apps processor and the baseband processor. Provides access to the "shared heap", as well as virtual serial channels used to communicate with various services on the baseband processor. config MSM_N_WAY_SMD depends on (MSM_SMD && (ARCH_QSD8X50 || ARCH_MSM7X30 || ARCH_MSM7227)) default y bool "MSM N-WAY SMD support" help Supports APPS-QDSP SMD communication along with normal APPS-MODEM SMD communication. config MSM_ONCRPCROUTER depends on MSM_SMD default y bool "MSM ONCRPC router support" help Support for the MSM ONCRPC router for communication between the ARM9 and ARM11 config MSM_RPCSERVERS depends on MSM_ONCRPCROUTER default y bool "Kernel side RPC server bundle" help none config MSM_RMT_STORAGE_SERVER depends on (ARCH_MSM && MSM_ONCRPCROUTER) default n bool "Remote Storage RPC server" help Provide RPC mechanism for remote processors to access storage device on apps processor. config MSM_DALRPC bool "DAL RPC support" depends on (ARCH_QSD8X50 || ARCH_MSM7X30) default y help Supports RPC calls to DAL devices on remote processor cores. config MSM_DALRPC_TEST tristate "DAL RPC test module" depends on (MSM_DALRPC && DEBUG_FS) default m help Exercises DAL RPC calls to QDSP6. config MSM_CPU_FREQ_SCREEN bool default n depends on HAS_EARLYSUSPEND help Simple cpufreq scaling based on screen ON/OFF. if MSM_CPU_FREQ_SCREEN config MSM_CPU_FREQ_SCREEN_OFF int "Screen off cpu frequency" default 245760 config MSM_CPU_FREQ_SCREEN_ON int "Screen on cpu frequency" default 384000 endif # MSM_CPU_FREQ_SCREEN config MSM_CPU_FREQ_ONDEMAND_MAX int "Max" default 384000 config MSM_CPU_FREQ_ONDEMAND_MIN int "Min" default 245760 config MSM_HW3D tristate "MSM Hardware 3D Register Driver" depends on EARLYSUSPEND default y help Provides access to registers needed by the userspace OpenGL|ES library. config MSM_HW3D_EARLYSUSPEND_ENABLED tristate "MSM Hardware 3D Driver support earlysuspend" depends on MSM_HW3D default y help Provide selection to support earlysuspend in HW3D or not. if !ARCH_QSD8X50 config MSM_ADSP depends on MSM_AMSS_VERSION_6210 || MSM_AMSS_VERSION_6220 || MSM_AMSS_VERSION_6225 || \ MSM_AMSS_VERSION_6350 tristate "MSM ADSP driver" default y help Provides access to registers needed by the userspace aDSP library. config MSM_ADSP_COMP depends on MSM_AMSS_VERSION_6355 || MSM_AMSS_VERSION_1355 || MSM_AMSS_VERSION_4725 || \ MSM_AMSS_VERSION_4735 || MSM_AMSS_VERSION_4410 tristate "MSM ADSP support init info by RPC" default y help Provides access to registers needed by the userspace aDSP library. endif config HTC_ACOUSTIC tristate "HTC acoustic driver" default y help The driver provide user space use shared memory allocate by using RPC code. config HTC_ACOUSTIC_QSD tristate "HTC acoustic driver for QSD" depends on ARCH_QSD8X50 default n help Provides user space use shared memory allocate by using RPC code. Provides headset amp, mic bias and speaker amp control. config MSM_ADSP_REPORT_EVENTS bool "Report modem events from the DSP" default y depends on (MSM_ADSP || MSM7KV2_AUDIO) help Normally, only messages from the aDSP are reported to userspace. With this option, we report events from the aDSP as well. config MSM7KV2_AUDIO bool "MSM7K v2 audio" depends on (ARCH_MSM7X30 && ANDROID_PMEM) default y help Enables QDSP5V2-based audio drivers for audio playbacks and voice call. config MSM_CLOCK_CTRL_DEBUG bool "Enable debugfs interface for clock control" default n depends on DEBUG_FS help When this option is enabled, the clock rate control interface is exported through debugfs. Use this at your own risk! config WIFI_CONTROL_FUNC bool "Enable WiFi control function abstraction" help Enables Power/Reset/Carddetect function abstraction config WIFI_MEM_PREALLOC depends on WIFI_CONTROL_FUNC bool "Preallocate memory for WiFi buffers" help Preallocates memory buffers for WiFi driver config WIFI_NVS_PROC_CREATE bool "Store nvs data into /proc/calibration" help store nvs data into /proc/calibration config MMC_SUPPORT_EXTERNEL_DRIVER bool "support external mmc driver" help Use external mmc driver for specific sdcc controller config MMC_BUSCLK_PWRSAVE bool "disable SD/MMC clocks in idle mode" default n help Clocks are disabled after 1 second of inactivity. config VIRTUAL_KPANIC_PARTITION bool "Create virtual kpanic partition" default n help Creates a virtual mtd partition named 'kpanic', stealing space from the specified mtd partition label. *** DO NOT USE IF YOU ARE USING OTA/RECOVERY *** config QSD_AUDIO bool "QSD audio" depends on (ARCH_QSD8X50) default y help Provides PCM, MP3, and AAC audio playback. config QSD_AUDIO_CALLREC bool "Call recording support [avs333]" depends on QSD_AUDIO default n config VIRTUAL_KPANIC_PSIZE depends on VIRTUAL_KPANIC_PARTITION int "Default kpanic partition size" default 1048576 help Sets the size of the virtual kpanic paritition to create. config QSD_HTC_FM bool "QSD HTC FM" depends on QSD_AUDIO default y help HTC FM driver for QSD config ARCH_MSM_FLASHLIGHT bool "Flashlight Driver" depends on ARCH_MSM help The flashlight driver is for MSM series. config VIRTUAL_KPANIC_SRC depends on VIRTUAL_KPANIC_PARTITION string "Partition to steal from" default "cache" help Sets the partition to steal from to make the virtual one. config MICROP_COMMON tristate "MICROP COMMON Driver" depends on I2C help HTC Microp-P support. config HTC_HEADSET_MGR tristate "HTC headset manager driver" default n help Provides support of HTC headset manager. config HTC_HEADSET_H2W tristate "HTC 2 Wire headset driver" depends on HTC_HEADSET_MGR default n help Provides support of HTC 2 Wire headset. config HTC_HEADSET_GPIO tristate "HTC GPIO headset detection driver" depends on HTC_HEADSET_MGR default n help Provides support of HTC GPIO headset detection. config HTC_HEADSET_MICROP tristate "HTC Micro-P headset detection driver" depends on HTC_HEADSET_MGR && MICROP_COMMON default n help Provides support of HTC Micro-P headset detection. config HTC_HEADSET_PMIC tristate "HTC PMIC headset detection driver" depends on HTC_HEADSET_MGR default n help Provides support of HTC PMIC headset detection. config BUILD_CIQ bool "Build in CIQ fixes" default n help For CIQ we need to do some additional fixes. endif config SMD_OFFSET_TCXO_STAT depends on MSM_SMD hex "SMD offset of total TCXO-off time" default 0x0 help TCXO off time is in tick of sleep clock, 1/32768. config AXI_SCREEN_POLICY depends on ARCH_QSD8X50 || ARCH_MSM7X00A || ARCH_MSM7227 || ARCH_MSM7225 depends on HAS_EARLYSUSPEND bool "Use higher AXI bus while screen ON" default n help Simple AXI scaling based on screen ON/OFF and PWRC. config MSM_NPA bool "Node Power Architecture(NPA) support" default y if ARCH_MSM7X30 help Enable support for Node Power Architecture for aggressive resource power management. NPA provides an interface for resources to export their parameters and clients to request a value. The resources have additional facility to aggreate requests, calculate the resultant value, apply the value and notify the clients of change in state. config MSM_NPA_LOG bool "Node Power Architecture(NPA) logging support" depends on MSM_NPA default y help Enable logging support for NPA. config MSM_NPA_DEBUG bool "Node Power Architecture(NPA) debug support" depends on MSM_NPA default n help Exports functions that can debug or reset NPA internal data structures. config MSM_NPA_REMOTE bool "Node Power Architecture(NPA) remoting" depends on MSM_NPA default n help Enables Linux NPA clients to talk to NPA nodes across processor boundary. config MSM_NPA_REMOTE_ONCRPC bool "Enables NPA remoting through ONCRPC protocol." depends on MSM_NPA && MSM_ONCRPCROUTER select MSM_NPA_REMOTE default n help Enables Linux NPA clients to talk to NPA nodes in the modem using ONCRPC communication protocol. config MSM_NPA_SYSTEM_BUS bool "NPA-managed System Bus (AXI) rates through PM_QOS." depends on MSM_NPA_REMOTE default n help PM_QOS System Bus rate requests are interpreted as 'Flow IDs' and are routed through the NPA framework. config MSM_SSBI tristate "SSBI support" depends on ARCH_MSM7X30 default y help Enable support for SSBI bus. This is required for communicatinig with Qualcomm PMICs and Audio codecs. config PHYS_OFFSET hex depends on MACH_HTCLEO default "0x11800000" if MACH_HTCLEO config HTCLEO_CPU_VOLT bool default y if HTCLEO_NO_UNDERVOLT choice prompt "The minimum amount of voltage feeds into the CPU is" default HTCLEO_NO_UNDERVOLT config HTCLEO_UNDERVOLT_1000 bool "1000 mV" config HTCLEO_UNDERVOLT_925 bool "925 mV" config HTCLEO_UNDERVOLT_800 bool "800 mV - does not work on every device" config HTCLEO_NO_UNDERVOLT bool "DEFAULT - 1050mV" endchoice config HTCLEO_OVERCLOCK bool "Support overclock to 1.190GHz" default n help add overclock ability to 1.190GHz. config HTCLEO_EXOVERCLOCK bool "Support overclock to 1.536GHz" depends on HTCLEO_OVERCLOCK default n help add overclock ability to 1.536GHz. config HTC_FB_CONSOLE bool "Boot console for HTC phones (needs a font which has width <= 8)" default n config HTC_FB_CONSOLE_DELAY bool "Wait some time after each message is printed" default n depends on HTC_FB_CONSOLE config HTC_FB_CONSOLE_BOOT bool "Use console only during boot" default n depends on HTC_FB_CONSOLE config VERY_EARLY_CONSOLE bool "Support for very early consoles" default n help Add support to initialize consoles very early. For this to have effect, the driver must support this and the consoles should be initialized in the board file as soon as possible. config HTCLEO_ENABLE_MULTI_TOUCH bool "Support for multitouch" default y depends on MACH_HTCLEO help Add multitouch support for touchscreen choice prompt "HTCLEO Keymapping" default HTCLEO_KEYMAP_ANDROID config HTCLEO_KEYMAP_ANDROID bool "Keymapping for Android" help Optimized for the default Android GUI config HTCLEO_KEYMAP_DPAD bool "Alternative Keymapping" help Useful in GUIs not designed for touch-only use as this enables four direction keys, alt key and enter key. Assumes landscape orientation. endchoice choice prompt "HTCLEO Backlight API type" default HTCLEO_BACKLIGHT_LED config HTCLEO_BACKLIGHT_LED bool "Backlight control via LED API" help Needed by Google Android config HTCLEO_BACKLIGHT select BACKLIGHT_LCD_SUPPORT bool "Standard backlight API" help Works in standard Linux distros. Tested in GNOME. endchoice