/* drivers/misc/bma150_spi.c - bma150 G-sensor driver
 *
 * Copyright (C) 2009 HTC Corporation.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <asm/uaccess.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/bma150.h>
#include <asm/gpio.h>
#include <linux/earlysuspend.h>
#include <linux/platform_device.h>
#include <mach/atmega_microp.h>

struct early_suspend bma_early_suspend;

static struct bma150_platform_data *this_pdata;

static struct mutex gsensor_RW_mutex;
static struct mutex gsensor_set_mode_mutex;

static int spi_microp_enable(uint8_t on)
{
	int ret;
	ret = microp_spi_vote_enable(SPI_GSENSOR, on);
	if (ret < 0)
		printk(KERN_ERR "%s: i2c_write_block fail\n", __func__);

	return ret;
}

static int spi_gsensor_read(uint8_t *data)
{
	int ret;

	mutex_lock(&gsensor_RW_mutex);

	ret = microp_i2c_write(MICROP_I2C_WCMD_GSENSOR_REG_DATA_REQ, data, 1);
	if (ret < 0) {
		printk(KERN_ERR "%s: i2c_write_block fail\n", __func__);
		mutex_unlock(&gsensor_RW_mutex);
		return ret;
	}

	ret = microp_i2c_read(MICROP_I2C_RCMD_GSENSOR_REG_DATA, data, 2);
	if (ret < 0) {
		printk(KERN_ERR "%s: i2c_read_block fail\n", __func__);
		mutex_unlock(&gsensor_RW_mutex);
		return ret;
	}

	mutex_unlock(&gsensor_RW_mutex);

	return ret;
}

static int spi_gsensor_write(uint8_t *data)
{
	int ret;

	mutex_lock(&gsensor_RW_mutex);

	ret = microp_i2c_write(MICROP_I2C_WCMD_GSENSOR_REG, data, 2);
	if (ret < 0) {
		printk(KERN_ERR "%s: i2c_write_block fail\n", __func__);
		mutex_unlock(&gsensor_RW_mutex);
		return ret;
	}

	mutex_unlock(&gsensor_RW_mutex);

	return ret;
}

static int spi_gsensor_init_hw(void)
{
	char buffer[2];

	memset(buffer, 0x0, sizeof(buffer));
	buffer[0] = RANGE_BWIDTH_REG;
	if (spi_gsensor_read(buffer) < 0)
		return -EIO;

	/*printk("spi_gsensor_init_hw,read RANGE_BWIDTH_REG = %x "
	, buffer[1]);*/

	buffer[1] = (buffer[1]&0xe0);
	buffer[0] = RANGE_BWIDTH_REG;
	if (spi_gsensor_write(buffer) < 0)
		return -EIO;

	buffer[0] = SMB150_CONF2_REG;
	if (spi_gsensor_read(buffer) < 0)
		return -EIO;

	buffer[1] = buffer[1]|1<<3;
	buffer[0] = SMB150_CONF2_REG;
	if (spi_gsensor_write(buffer) < 0)
		return -EIO;

	return 0;
}

/*
static int spi_gsensor_read_version(void)
{
	uint8_t buffer[2];
	int ret = -EIO;

	buffer[0] = VERSION_REG;
	buffer[1] = 1;
	ret = spi_gsensor_read(buffer);
	if (ret < 0) {
		printk(KERN_ERR "%s: get al_version fail(%d)\n", __func__, ret);
		return ret;
	}
	printk(KERN_INFO "%s: al_version: 0x%2.2X\n", __func__, buffer[0]);

	buffer[0] = CHIP_ID_REG;
	buffer[1] = 1;
	ret = spi_gsensor_read(buffer);
	if (ret < 0) {
		printk(KERN_ERR "%s: get chip_id fail(%d)\n", __func__, ret);
		return ret;
	}
	printk(KERN_INFO "%s: chip_id: 0x%2.2X\n", __func__, buffer[0]);
	return 0;
}
*/
static int spi_bma150_TransRBuff(short *rbuf)
{
	int ret;
	unsigned char buffer[6];
	memset(buffer, 0, 6);

	mutex_lock(&gsensor_RW_mutex);

	buffer[0] = 1;
	ret = microp_i2c_write(MICROP_I2C_WCMD_GSENSOR_DATA_REQ, buffer, 1);
	if (ret < 0) {
		printk(KERN_ERR "%s: i2c_write_block fail\n", __func__);
		mutex_unlock(&gsensor_RW_mutex);
		return ret;
	}

	if (this_pdata && this_pdata->microp_new_cmd &&
			this_pdata->microp_new_cmd == 1) {
		/*printk(KERN_DEBUG "%s: New MicroP command\n", __func__);*/
		ret = microp_i2c_read(MICROP_I2C_RCMD_GSENSOR_DATA, buffer, 6);
		rbuf[0] = buffer[0]<<2|buffer[1]>>6;
		if (rbuf[0]&0x200)
			rbuf[0] -= 1<<10;
		rbuf[1] = buffer[2]<<2|buffer[3]>>6;
		if (rbuf[1]&0x200)
			rbuf[1] -= 1<<10;
		rbuf[2] = buffer[4]<<2|buffer[5]>>6;
		if (rbuf[2]&0x200)
			rbuf[2] -= 1<<10;
	} else {
		/* For Passion with V01 ~ V05 Microp */
		/*printk(KERN_DEBUG "%s: Old MicroP command\n", __func__);*/
		ret = microp_i2c_read(MICROP_I2C_RCMD_GSENSOR_X_DATA,
					buffer, 2);
		if (ret < 0) {
			printk(KERN_ERR "%s: i2c_read_block fail\n", __func__);
			mutex_unlock(&gsensor_RW_mutex);
			return ret;
		}
		rbuf[0] = buffer[0]<<2|buffer[1]>>6;
		if (rbuf[0]&0x200)
			rbuf[0] -= 1<<10;

		ret = microp_i2c_read(MICROP_I2C_RCMD_GSENSOR_Y_DATA,
					buffer, 2);
		if (ret < 0) {
			printk(KERN_ERR "%s: i2c_read_block fail\n", __func__);
			mutex_unlock(&gsensor_RW_mutex);
			return ret;
			}
		rbuf[1] = buffer[0]<<2|buffer[1]>>6;
		if (rbuf[1]&0x200)
			rbuf[1] -= 1<<10;

		ret = microp_i2c_read(MICROP_I2C_RCMD_GSENSOR_Z_DATA,
					buffer, 2);
		if (ret < 0) {
			printk(KERN_ERR "%s: i2c_read_block fail\n", __func__);
			mutex_unlock(&gsensor_RW_mutex);
			return ret;
			}
		rbuf[2] = buffer[0]<<2|buffer[1]>>6;
		if (rbuf[2]&0x200)
			rbuf[2] -= 1<<10;
	}
/*	printk("X=%d, Y=%d, Z=%d\n",rbuf[0],rbuf[1],rbuf[2]);*/

/*	printk(KERN_DEBUG "%s: 0x%2.2X 0x%2.2X 0x%2.2X \
0x%2.2X 0x%2.2X 0x%2.2X\n",
		__func__, buffer[0], buffer[1], buffer[2], \
		buffer[3], buffer[4], buffer[5]);*/

	mutex_unlock(&gsensor_RW_mutex);

	return 1;
}

static int __spi_bma150_set_mode(char mode)
{
	char buffer[2];
	int ret;
	mutex_lock(&gsensor_set_mode_mutex);
	if (mode == BMA_MODE_NORMAL) {
		spi_microp_enable(1);
		printk(KERN_INFO "%s: BMA get into NORMAL mode!\n",
			__func__);
	}

	buffer[0] = SMB150_CTRL_REG;
	ret = spi_gsensor_read(buffer);
	if (ret < 0) {
		mutex_unlock(&gsensor_set_mode_mutex);
		return -1;
	}

	buffer[1] = (buffer[1]&0xfe)|mode;
	buffer[0] = SMB150_CTRL_REG;
	ret = spi_gsensor_write(buffer);

	if (mode == BMA_MODE_SLEEP) {
		spi_microp_enable(0);
		printk(KERN_INFO "%s: BMA get into SLEEP mode!\n",
			__func__);
	}
	mutex_unlock(&gsensor_set_mode_mutex);
	return ret;
}


static int spi_bma150_open(struct inode *inode, struct file *file)
{
	return nonseekable_open(inode, file);
}

static int spi_bma150_release(struct inode *inode, struct file *file)
{
	return 0;
}

static int spi_bma150_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
	   unsigned long arg)
{
	void __user *argp = (void __user *)arg;
	char rwbuf[8];
	char *toRbuf;
	int ret = -1;
	short buf[8], temp;

	switch (cmd) {
	case BMA_IOCTL_READ:
	case BMA_IOCTL_WRITE:
	case BMA_IOCTL_SET_MODE:
		if (copy_from_user(&rwbuf, argp, sizeof(rwbuf)))
			return -EFAULT;
		break;
	case BMA_IOCTL_READ_ACCELERATION:
		if (copy_from_user(&buf, argp, sizeof(buf)))
			return -EFAULT;
		break;
	default:
		break;
	}

	switch (cmd) {
	case BMA_IOCTL_INIT:
		ret = spi_gsensor_init_hw();
		if (ret < 0)
			return ret;
		break;

	case BMA_IOCTL_READ:
		if (rwbuf[0] < 1)
			return -EINVAL;
		ret = spi_gsensor_read(&rwbuf[1]);
		if (ret < 0)
			return ret;
		break;
	case BMA_IOCTL_WRITE:
		if (rwbuf[0] < 2)
			return -EINVAL;
		ret = spi_gsensor_write(&rwbuf[1]);
		if (ret < 0)
			return ret;
		break;
	case BMA_IOCTL_READ_ACCELERATION:
		ret = spi_bma150_TransRBuff(&buf[0]);
		if (ret < 0)
			return ret;
		break;
	case BMA_IOCTL_SET_MODE:
		/*printk(KERN_DEBUG
		"%s: BMA_IOCTL_SET_MODE by ioctl = %d\n",
			__func__,rwbuf[0]);*/
		ret = __spi_bma150_set_mode(rwbuf[0]);
		if (ret < 0)
			return ret;
		break;
	case BMA_IOCTL_GET_INT:
		temp = 0;
		break;
	case BMA_IOCTL_GET_CHIP_LAYOUT:
		if (this_pdata)
			temp = this_pdata->chip_layout;
		break;
	default:
		return -ENOTTY;
	}

	switch (cmd) {
	case BMA_IOCTL_READ:
		toRbuf = &rwbuf[1];
		if (copy_to_user(argp, toRbuf, sizeof(rwbuf)-1))
			return -EFAULT;
		break;
	case BMA_IOCTL_READ_ACCELERATION:
		if (copy_to_user(argp, &buf, sizeof(buf)))
			return -EFAULT;
		break;
	case BMA_IOCTL_GET_INT:
		if (copy_to_user(argp, &temp, sizeof(temp)))
			return -EFAULT;
		break;
	case BMA_IOCTL_GET_CHIP_LAYOUT:
		if (copy_to_user(argp, &temp, sizeof(temp)))
			return -EFAULT;
		break;
	default:
		break;
	}

	return 0;
}

static struct file_operations spi_bma_fops = {
	.owner = THIS_MODULE,
	.open = spi_bma150_open,
	.release = spi_bma150_release,
	.ioctl = spi_bma150_ioctl,
};

static struct miscdevice spi_bma_device = {
	.minor = MISC_DYNAMIC_MINOR,
	.name = "bma150",
	.fops = &spi_bma_fops,
};

static void bma150_early_suspend(struct early_suspend *handler)
{
	int ret = 0;
	ret = __spi_bma150_set_mode(BMA_MODE_SLEEP);

	/*printk(KERN_DEBUG
		"%s: spi_bma150_set_mode returned = %d!\n",
			__func__, ret);*/
}

static void bma150_early_resume(struct early_suspend *handler)
{
	/*printk(KERN_DEBUG
		"%s: spi_bma150_set_mode returned = %d!\n",
			__func__, ret);*/
}

static int spi_gsensor_initial(void)
{
	int ret;
/*	ret = spi_microp_enable(1);
	if (ret < 0) {
		printk(KERN_ERR "%s: spi_microp_enable fail\n", __func__);
		return ret;
	}*/
/*	ret = spi_gsensor_read_version();
	if (ret < 0) {
		printk(KERN_ERR "%s: get version fail\n", __func__);
		return ret;
	}*/

/*	ret = microp_gsensor_init_hw(client);
	if (ret < 0) {
		printk(KERN_ERR "%s: init g-sensor fail\n", __func__);
		return ret;
	}
*/
	ret = misc_register(&spi_bma_device);
	if (ret < 0) {
		printk(KERN_ERR "%s: init misc_register fail\n", __func__);
		return ret;
	}

	mutex_init(&gsensor_RW_mutex);
	mutex_init(&gsensor_set_mode_mutex);


	ret = spi_microp_enable(1);
	if (ret) {
		printk(KERN_ERR "%s: spi_microp_enable(1) fail!\n", __func__);
		goto err_spi_enable;
	}

	ret = __spi_bma150_set_mode(BMA_MODE_SLEEP);
	if (ret) {
		printk(KERN_ERR "%s: set BMA_MODE_SLEEP fail!\n", __func__);
		goto err_set_mode;
	}

	bma_early_suspend.suspend = bma150_early_suspend;
	bma_early_suspend.resume = bma150_early_resume;
	register_early_suspend(&bma_early_suspend);

	return 0;

err_set_mode:
	spi_microp_enable(0);
err_spi_enable:
	misc_deregister(&spi_bma_device);

	return ret;
}

static int  spi_bma150_probe(struct platform_device *pdev)
{
	printk(KERN_INFO "%s: G-sensor connect with microP: "
			"start initial\n", __func__);

	this_pdata = pdev->dev.platform_data;
/*
	printk(KERN_DEBUG "%s: this_pdata->microp_new_cmd = %d\n",
			__func__, this_pdata->microp_new_cmd);
*/
	spi_gsensor_initial();

	return 0;
}

static int spi_bma150_remove(struct platform_device *pdev)
{
	mutex_destroy(&gsensor_set_mode_mutex);
	return 0;
}

static struct platform_driver spi_bma150_driver = {
	.probe		= spi_bma150_probe,
	.remove		= spi_bma150_remove,
	.driver		= {
		.name		= BMA150_G_SENSOR_NAME,
		.owner		= THIS_MODULE,
	},
};

static int __init spi_bma150_init(void)
{
	return platform_driver_register(&spi_bma150_driver);

}

static void __exit spi_bma150_exit(void)
{
	platform_driver_unregister(&spi_bma150_driver);
}

module_init(spi_bma150_init);
module_exit(spi_bma150_exit);

MODULE_DESCRIPTION("BMA150 G-sensor driver");
MODULE_LICENSE("GPL");