/* * Copyright (c) 2006-2008 Intel Corporation * Copyright (c) 2007 Dave Airlie * * DRM core CRTC related functions * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. * * Authors: * Keith Packard * Eric Anholt * Dave Airlie * Jesse Barnes */ #include "drmP.h" #include "drm_crtc.h" #include "drm_crtc_helper.h" #include "drm_fb_helper.h" static void drm_mode_validate_flag(struct drm_connector *connector, int flags) { struct drm_display_mode *mode, *t; if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE)) return; list_for_each_entry_safe(mode, t, &connector->modes, head) { if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && !(flags & DRM_MODE_FLAG_INTERLACE)) mode->status = MODE_NO_INTERLACE; if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && !(flags & DRM_MODE_FLAG_DBLSCAN)) mode->status = MODE_NO_DBLESCAN; } return; } /** * drm_helper_probe_connector_modes - get complete set of display modes * @dev: DRM device * @maxX: max width for modes * @maxY: max height for modes * * LOCKING: * Caller must hold mode config lock. * * Based on @dev's mode_config layout, scan all the connectors and try to detect * modes on them. Modes will first be added to the connector's probed_modes * list, then culled (based on validity and the @maxX, @maxY parameters) and * put into the normal modes list. * * Intended to be used either at bootup time or when major configuration * changes have occurred. * * FIXME: take into account monitor limits * * RETURNS: * Number of modes found on @connector. */ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY) { struct drm_device *dev = connector->dev; struct drm_display_mode *mode, *t; struct drm_connector_helper_funcs *connector_funcs = connector->helper_private; int count = 0; int mode_flags = 0; DRM_DEBUG_KMS("%s\n", drm_get_connector_name(connector)); /* set all modes to the unverified state */ list_for_each_entry_safe(mode, t, &connector->modes, head) mode->status = MODE_UNVERIFIED; if (connector->force) { if (connector->force == DRM_FORCE_ON) connector->status = connector_status_connected; else connector->status = connector_status_disconnected; if (connector->funcs->force) connector->funcs->force(connector); } else connector->status = connector->funcs->detect(connector); if (connector->status == connector_status_disconnected) { DRM_DEBUG_KMS("%s is disconnected\n", drm_get_connector_name(connector)); goto prune; } count = (*connector_funcs->get_modes)(connector); if (!count) { count = drm_add_modes_noedid(connector, 800, 600); if (!count) return 0; } drm_mode_connector_list_update(connector); if (maxX && maxY) drm_mode_validate_size(dev, &connector->modes, maxX, maxY, 0); if (connector->interlace_allowed) mode_flags |= DRM_MODE_FLAG_INTERLACE; if (connector->doublescan_allowed) mode_flags |= DRM_MODE_FLAG_DBLSCAN; drm_mode_validate_flag(connector, mode_flags); list_for_each_entry_safe(mode, t, &connector->modes, head) { if (mode->status == MODE_OK) mode->status = connector_funcs->mode_valid(connector, mode); } prune: drm_mode_prune_invalid(dev, &connector->modes, true); if (list_empty(&connector->modes)) return 0; drm_mode_sort(&connector->modes); DRM_DEBUG_KMS("Probed modes for %s\n", drm_get_connector_name(connector)); list_for_each_entry_safe(mode, t, &connector->modes, head) { mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); drm_mode_debug_printmodeline(mode); } return count; } EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); int drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX, uint32_t maxY) { struct drm_connector *connector; int count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { count += drm_helper_probe_single_connector_modes(connector, maxX, maxY); } return count; } EXPORT_SYMBOL(drm_helper_probe_connector_modes); /** * drm_helper_encoder_in_use - check if a given encoder is in use * @encoder: encoder to check * * LOCKING: * Caller must hold mode config lock. * * Walk @encoders's DRM device's mode_config and see if it's in use. * * RETURNS: * True if @encoder is part of the mode_config, false otherwise. */ bool drm_helper_encoder_in_use(struct drm_encoder *encoder) { struct drm_connector *connector; struct drm_device *dev = encoder->dev; list_for_each_entry(connector, &dev->mode_config.connector_list, head) if (connector->encoder == encoder) return true; return false; } EXPORT_SYMBOL(drm_helper_encoder_in_use); /** * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config * @crtc: CRTC to check * * LOCKING: * Caller must hold mode config lock. * * Walk @crtc's DRM device's mode_config and see if it's in use. * * RETURNS: * True if @crtc is part of the mode_config, false otherwise. */ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) { struct drm_encoder *encoder; struct drm_device *dev = crtc->dev; /* FIXME: Locking around list access? */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder)) return true; return false; } EXPORT_SYMBOL(drm_helper_crtc_in_use); /** * drm_disable_unused_functions - disable unused objects * @dev: DRM device * * LOCKING: * Caller must hold mode config lock. * * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled * by calling its dpms function, which should power it off. */ void drm_helper_disable_unused_functions(struct drm_device *dev) { struct drm_encoder *encoder; struct drm_connector *connector; struct drm_encoder_helper_funcs *encoder_funcs; struct drm_crtc *crtc; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder) continue; if (connector->status == connector_status_disconnected) connector->encoder = NULL; } list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { encoder_funcs = encoder->helper_private; if (!drm_helper_encoder_in_use(encoder)) { if (encoder_funcs->disable) (*encoder_funcs->disable)(encoder); else (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); /* disconnector encoder from any connector */ encoder->crtc = NULL; } } list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc->enabled = drm_helper_crtc_in_use(crtc); if (!crtc->enabled) { crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); crtc->fb = NULL; } } } EXPORT_SYMBOL(drm_helper_disable_unused_functions); static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *connector, int width, int height) { struct drm_display_mode *mode; list_for_each_entry(mode, &connector->modes, head) { if (drm_mode_width(mode) > width || drm_mode_height(mode) > height) continue; if (mode->type & DRM_MODE_TYPE_PREFERRED) return mode; } return NULL; } static bool drm_has_cmdline_mode(struct drm_connector *connector) { struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; struct drm_fb_helper_cmdline_mode *cmdline_mode; if (!fb_help_conn) return false; cmdline_mode = &fb_help_conn->cmdline_mode; return cmdline_mode->specified; } static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height) { struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private; struct drm_fb_helper_cmdline_mode *cmdline_mode; struct drm_display_mode *mode = NULL; if (!fb_help_conn) return mode; cmdline_mode = &fb_help_conn->cmdline_mode; if (cmdline_mode->specified == false) return mode; /* attempt to find a matching mode in the list of modes * we have gotten so far, if not add a CVT mode that conforms */ if (cmdline_mode->rb || cmdline_mode->margins) goto create_mode; list_for_each_entry(mode, &connector->modes, head) { /* check width/height */ if (mode->hdisplay != cmdline_mode->xres || mode->vdisplay != cmdline_mode->yres) continue; if (cmdline_mode->refresh_specified) { if (mode->vrefresh != cmdline_mode->refresh) continue; } if (cmdline_mode->interlace) { if (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) continue; } return mode; } create_mode: mode = drm_cvt_mode(connector->dev, cmdline_mode->xres, cmdline_mode->yres, cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, cmdline_mode->rb, cmdline_mode->interlace, cmdline_mode->margins); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); list_add(&mode->head, &connector->modes); return mode; } static bool drm_connector_enabled(struct drm_connector *connector, bool strict) { bool enable; if (strict) { enable = connector->status == connector_status_connected; } else { enable = connector->status != connector_status_disconnected; } return enable; } static void drm_enable_connectors(struct drm_device *dev, bool *enabled) { bool any_enabled = false; struct drm_connector *connector; int i = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { enabled[i] = drm_connector_enabled(connector, true); DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id, enabled[i] ? "yes" : "no"); any_enabled |= enabled[i]; i++; } if (any_enabled) return; i = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { enabled[i] = drm_connector_enabled(connector, false); i++; } } static bool drm_target_preferred(struct drm_device *dev, struct drm_display_mode **modes, bool *enabled, int width, int height) { struct drm_connector *connector; int i = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (enabled[i] == false) { i++; continue; } DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n", connector->base.id); /* got for command line mode first */ modes[i] = drm_pick_cmdline_mode(connector, width, height); if (!modes[i]) { DRM_DEBUG_KMS("looking for preferred mode on connector %d\n", connector->base.id); modes[i] = drm_has_preferred_mode(connector, width, height); } /* No preferred modes, pick one off the list */ if (!modes[i] && !list_empty(&connector->modes)) { list_for_each_entry(modes[i], &connector->modes, head) break; } DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name : "none"); i++; } return true; } static int drm_pick_crtcs(struct drm_device *dev, struct drm_crtc **best_crtcs, struct drm_display_mode **modes, int n, int width, int height) { int c, o; struct drm_connector *connector; struct drm_connector_helper_funcs *connector_funcs; struct drm_encoder *encoder; struct drm_crtc *best_crtc; int my_score, best_score, score; struct drm_crtc **crtcs, *crtc; if (n == dev->mode_config.num_connector) return 0; c = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (c == n) break; c++; } best_crtcs[n] = NULL; best_crtc = NULL; best_score = drm_pick_crtcs(dev, best_crtcs, modes, n+1, width, height); if (modes[n] == NULL) return best_score; crtcs = kmalloc(dev->mode_config.num_connector * sizeof(struct drm_crtc *), GFP_KERNEL); if (!crtcs) return best_score; my_score = 1; if (connector->status == connector_status_connected) my_score++; if (drm_has_cmdline_mode(connector)) my_score++; if (drm_has_preferred_mode(connector, width, height)) my_score++; connector_funcs = connector->helper_private; encoder = connector_funcs->best_encoder(connector); if (!encoder) goto out; connector->encoder = encoder; /* select a crtc for this connector and then attempt to configure remaining connectors */ c = 0; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if ((encoder->possible_crtcs & (1 << c)) == 0) { c++; continue; } for (o = 0; o < n; o++) if (best_crtcs[o] == crtc) break; if (o < n) { /* ignore cloning for now */ c++; continue; } crtcs[n] = crtc; memcpy(crtcs, best_crtcs, n * sizeof(struct drm_crtc *)); score = my_score + drm_pick_crtcs(dev, crtcs, modes, n + 1, width, height); if (score > best_score) { best_crtc = crtc; best_score = score; memcpy(best_crtcs, crtcs, dev->mode_config.num_connector * sizeof(struct drm_crtc *)); } c++; } out: kfree(crtcs); return best_score; } static void drm_setup_crtcs(struct drm_device *dev) { struct drm_crtc **crtcs; struct drm_display_mode **modes; struct drm_encoder *encoder; struct drm_connector *connector; bool *enabled; int width, height; int i, ret; DRM_DEBUG_KMS("\n"); width = dev->mode_config.max_width; height = dev->mode_config.max_height; /* clean out all the encoder/crtc combos */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { encoder->crtc = NULL; } crtcs = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_crtc *), GFP_KERNEL); modes = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_display_mode *), GFP_KERNEL); enabled = kcalloc(dev->mode_config.num_connector, sizeof(bool), GFP_KERNEL); drm_enable_connectors(dev, enabled); ret = drm_target_preferred(dev, modes, enabled, width, height); if (!ret) DRM_ERROR("Unable to find initial modes\n"); DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n", width, height); drm_pick_crtcs(dev, crtcs, modes, 0, width, height); i = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct drm_display_mode *mode = modes[i]; struct drm_crtc *crtc = crtcs[i]; if (connector->encoder == NULL) { i++; continue; } if (mode && crtc) { DRM_DEBUG_KMS("desired mode %s set on crtc %d\n", mode->name, crtc->base.id); crtc->desired_mode = mode; connector->encoder->crtc = crtc; } else { connector->encoder->crtc = NULL; connector->encoder = NULL; } i++; } kfree(crtcs); kfree(modes); kfree(enabled); } /** * drm_encoder_crtc_ok - can a given crtc drive a given encoder? * @encoder: encoder to test * @crtc: crtc to test * * Return false if @encoder can't be driven by @crtc, true otherwise. */ static bool drm_encoder_crtc_ok(struct drm_encoder *encoder, struct drm_crtc *crtc) { struct drm_device *dev; struct drm_crtc *tmp; int crtc_mask = 1; WARN(!crtc, "checking null crtc?"); dev = crtc->dev; list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { if (tmp == crtc) break; crtc_mask <<= 1; } if (encoder->possible_crtcs & crtc_mask) return true; return false; } /* * Check the CRTC we're going to map each output to vs. its current * CRTC. If they don't match, we have to disable the output and the CRTC * since the driver will have to re-route things. */ static void drm_crtc_prepare_encoders(struct drm_device *dev) { struct drm_encoder_helper_funcs *encoder_funcs; struct drm_encoder *encoder; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { encoder_funcs = encoder->helper_private; /* Disable unused encoders */ if (encoder->crtc == NULL) (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); /* Disable encoders whose CRTC is about to change */ if (encoder_funcs->get_crtc && encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); } } /** * drm_crtc_set_mode - set a mode * @crtc: CRTC to program * @mode: mode to use * @x: width of mode * @y: height of mode * * LOCKING: * Caller must hold mode config lock. * * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance * to fixup or reject the mode prior to trying to set it. * * RETURNS: * True if the mode was set successfully, or false otherwise. */ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_display_mode *adjusted_mode, saved_mode; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_encoder_helper_funcs *encoder_funcs; int saved_x, saved_y; struct drm_encoder *encoder; bool ret = true; adjusted_mode = drm_mode_duplicate(dev, mode); crtc->enabled = drm_helper_crtc_in_use(crtc); if (!crtc->enabled) return true; saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; /* Update crtc values up front so the driver can rely on them for mode * setting. */ crtc->mode = *mode; crtc->x = x; crtc->y = y; /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc != crtc) continue; encoder_funcs = encoder->helper_private; if (!(ret = encoder_funcs->mode_fixup(encoder, mode, adjusted_mode))) { goto done; } } if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) { goto done; } /* Prepare the encoders and CRTCs before setting the mode. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc != crtc) continue; encoder_funcs = encoder->helper_private; /* Disable the encoders as the first thing we do. */ encoder_funcs->prepare(encoder); } drm_crtc_prepare_encoders(dev); crtc_funcs->prepare(crtc); /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); if (!ret) goto done; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc != crtc) continue; DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder), mode->name, mode->base.id); encoder_funcs = encoder->helper_private; encoder_funcs->mode_set(encoder, mode, adjusted_mode); } /* Now enable the clocks, plane, pipe, and connectors that we set up. */ crtc_funcs->commit(crtc); list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc != crtc) continue; encoder_funcs = encoder->helper_private; encoder_funcs->commit(encoder); } /* XXX free adjustedmode */ drm_mode_destroy(dev, adjusted_mode); /* FIXME: add subpixel order */ done: if (!ret) { crtc->mode = saved_mode; crtc->x = saved_x; crtc->y = saved_y; } return ret; } EXPORT_SYMBOL(drm_crtc_helper_set_mode); /** * drm_crtc_helper_set_config - set a new config from userspace * @crtc: CRTC to setup * @crtc_info: user provided configuration * @new_mode: new mode to set * @connector_set: set of connectors for the new config * @fb: new framebuffer * * LOCKING: * Caller must hold mode config lock. * * Setup a new configuration, provided by the user in @crtc_info, and enable * it. * * RETURNS: * Zero. (FIXME) */ int drm_crtc_helper_set_config(struct drm_mode_set *set) { struct drm_device *dev; struct drm_crtc *save_crtcs, *new_crtc, *crtc; struct drm_encoder *save_encoders, *new_encoder, *encoder; struct drm_framebuffer *old_fb = NULL; bool mode_changed = false; /* if true do a full mode set */ bool fb_changed = false; /* if true and !mode_changed just do a flip */ struct drm_connector *save_connectors, *connector; int count = 0, ro, fail = 0; struct drm_crtc_helper_funcs *crtc_funcs; int ret = 0; DRM_DEBUG_KMS("\n"); if (!set) return -EINVAL; if (!set->crtc) return -EINVAL; if (!set->crtc->helper_private) return -EINVAL; crtc_funcs = set->crtc->helper_private; DRM_DEBUG_KMS("crtc: %p %d fb: %p connectors: %p num_connectors:" " %d (x, y) (%i, %i)\n", set->crtc, set->crtc->base.id, set->fb, set->connectors, (int)set->num_connectors, set->x, set->y); dev = set->crtc->dev; /* Allocate space for the backup of all (non-pointer) crtc, encoder and * connector data. */ save_crtcs = kzalloc(dev->mode_config.num_crtc * sizeof(struct drm_crtc), GFP_KERNEL); if (!save_crtcs) return -ENOMEM; save_encoders = kzalloc(dev->mode_config.num_encoder * sizeof(struct drm_encoder), GFP_KERNEL); if (!save_encoders) { kfree(save_crtcs); return -ENOMEM; } save_connectors = kzalloc(dev->mode_config.num_connector * sizeof(struct drm_connector), GFP_KERNEL); if (!save_connectors) { kfree(save_crtcs); kfree(save_encoders); return -ENOMEM; } /* Copy data. Note that driver private data is not affected. * Should anything bad happen only the expected state is * restored, not the drivers personal bookkeeping. */ count = 0; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { save_crtcs[count++] = *crtc; } count = 0; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { save_encoders[count++] = *encoder; } count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { save_connectors[count++] = *connector; } /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); mode_changed = true; } else if (set->fb == NULL) { mode_changed = true; } else if ((set->fb->bits_per_pixel != set->crtc->fb->bits_per_pixel) || set->fb->depth != set->crtc->fb->depth) fb_changed = true; else fb_changed = true; } if (set->x != set->crtc->x || set->y != set->crtc->y) fb_changed = true; if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { DRM_DEBUG_KMS("modes are different, full mode set\n"); drm_mode_debug_printmodeline(&set->crtc->mode); drm_mode_debug_printmodeline(set->mode); mode_changed = true; } /* a) traverse passed in connector list and get encoders for them */ count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct drm_connector_helper_funcs *connector_funcs = connector->helper_private; new_encoder = connector->encoder; for (ro = 0; ro < set->num_connectors; ro++) { if (set->connectors[ro] == connector) { new_encoder = connector_funcs->best_encoder(connector); /* if we can't get an encoder for a connector we are setting now - then fail */ if (new_encoder == NULL) /* don't break so fail path works correct */ fail = 1; break; } } if (new_encoder != connector->encoder) { DRM_DEBUG_KMS("encoder changed, full mode switch\n"); mode_changed = true; /* If the encoder is reused for another connector, then * the appropriate crtc will be set later. */ if (connector->encoder) connector->encoder->crtc = NULL; connector->encoder = new_encoder; } } if (fail) { ret = -EINVAL; goto fail; } count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder) continue; if (connector->encoder->crtc == set->crtc) new_crtc = NULL; else new_crtc = connector->encoder->crtc; for (ro = 0; ro < set->num_connectors; ro++) { if (set->connectors[ro] == connector) new_crtc = set->crtc; } /* Make sure the new CRTC will work with the encoder */ if (new_crtc && !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { ret = -EINVAL; goto fail; } if (new_crtc != connector->encoder->crtc) { DRM_DEBUG_KMS("crtc changed, full mode switch\n"); mode_changed = true; connector->encoder->crtc = new_crtc; } DRM_DEBUG_KMS("setting connector %d crtc to %p\n", connector->base.id, new_crtc); } /* mode_set_base is not a required function */ if (fb_changed && !crtc_funcs->mode_set_base) mode_changed = true; if (mode_changed) { old_fb = set->crtc->fb; set->crtc->fb = set->fb; set->crtc->enabled = (set->mode != NULL); if (set->mode != NULL) { DRM_DEBUG_KMS("attempting to set mode from" " userspace\n"); drm_mode_debug_printmodeline(set->mode); if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, old_fb)) { DRM_ERROR("failed to set mode on crtc %p\n", set->crtc); ret = -EINVAL; goto fail; } /* TODO are these needed? */ set->crtc->desired_x = set->x; set->crtc->desired_y = set->y; set->crtc->desired_mode = set->mode; } drm_helper_disable_unused_functions(dev); } else if (fb_changed) { set->crtc->x = set->x; set->crtc->y = set->y; old_fb = set->crtc->fb; if (set->crtc->fb != set->fb) set->crtc->fb = set->fb; ret = crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb); if (ret != 0) goto fail; } kfree(save_connectors); kfree(save_encoders); kfree(save_crtcs); return 0; fail: /* Restore all previous data. */ count = 0; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { *crtc = save_crtcs[count++]; } count = 0; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { *encoder = save_encoders[count++]; } count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { *connector = save_connectors[count++]; } kfree(save_connectors); kfree(save_encoders); kfree(save_crtcs); return ret; } EXPORT_SYMBOL(drm_crtc_helper_set_config); bool drm_helper_plugged_event(struct drm_device *dev) { DRM_DEBUG_KMS("\n"); drm_helper_probe_connector_modes(dev, dev->mode_config.max_width, dev->mode_config.max_height); drm_setup_crtcs(dev); /* alert the driver fb layer */ dev->mode_config.funcs->fb_changed(dev); /* FIXME: send hotplug event */ return true; } /** * drm_initial_config - setup a sane initial connector configuration * @dev: DRM device * * LOCKING: * Called at init time, must take mode config lock. * * Scan the CRTCs and connectors and try to put together an initial setup. * At the moment, this is a cloned configuration across all heads with * a new framebuffer object as the backing store. * * RETURNS: * Zero if everything went ok, nonzero otherwise. */ bool drm_helper_initial_config(struct drm_device *dev) { int count = 0; /* disable all the possible outputs/crtcs before entering KMS mode */ drm_helper_disable_unused_functions(dev); drm_fb_helper_parse_command_line(dev); count = drm_helper_probe_connector_modes(dev, dev->mode_config.max_width, dev->mode_config.max_height); /* * we shouldn't end up with no modes here. */ WARN(!count, "No connectors reported connected with modes\n"); drm_setup_crtcs(dev); /* alert the driver fb layer */ dev->mode_config.funcs->fb_changed(dev); return 0; } EXPORT_SYMBOL(drm_helper_initial_config); static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder) { int dpms = DRM_MODE_DPMS_OFF; struct drm_connector *connector; struct drm_device *dev = encoder->dev; list_for_each_entry(connector, &dev->mode_config.connector_list, head) if (connector->encoder == encoder) if (connector->dpms < dpms) dpms = connector->dpms; return dpms; } static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) { int dpms = DRM_MODE_DPMS_OFF; struct drm_connector *connector; struct drm_device *dev = crtc->dev; list_for_each_entry(connector, &dev->mode_config.connector_list, head) if (connector->encoder && connector->encoder->crtc == crtc) if (connector->dpms < dpms) dpms = connector->dpms; return dpms; } /** * drm_helper_connector_dpms * @connector affected connector * @mode DPMS mode * * Calls the low-level connector DPMS function, then * calls appropriate encoder and crtc DPMS functions as well */ void drm_helper_connector_dpms(struct drm_connector *connector, int mode) { struct drm_encoder *encoder = connector->encoder; struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; int old_dpms; if (mode == connector->dpms) return; old_dpms = connector->dpms; connector->dpms = mode; /* from off to on, do crtc then encoder */ if (mode < old_dpms) { if (crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; if (crtc_funcs->dpms) (*crtc_funcs->dpms) (crtc, drm_helper_choose_crtc_dpms(crtc)); } if (encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; if (encoder_funcs->dpms) (*encoder_funcs->dpms) (encoder, drm_helper_choose_encoder_dpms(encoder)); } } /* from on to off, do encoder then crtc */ if (mode > old_dpms) { if (encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; if (encoder_funcs->dpms) (*encoder_funcs->dpms) (encoder, drm_helper_choose_encoder_dpms(encoder)); } if (crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; if (crtc_funcs->dpms) (*crtc_funcs->dpms) (crtc, drm_helper_choose_crtc_dpms(crtc)); } } return; } EXPORT_SYMBOL(drm_helper_connector_dpms); /** * drm_hotplug_stage_two * @dev DRM device * @connector hotpluged connector * * LOCKING. * Caller must hold mode config lock, function might grab struct lock. * * Stage two of a hotplug. * * RETURNS: * Zero on success, errno on failure. */ int drm_helper_hotplug_stage_two(struct drm_device *dev) { drm_helper_plugged_event(dev); return 0; } EXPORT_SYMBOL(drm_helper_hotplug_stage_two); int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, struct drm_mode_fb_cmd *mode_cmd) { fb->width = mode_cmd->width; fb->height = mode_cmd->height; fb->pitch = mode_cmd->pitch; fb->bits_per_pixel = mode_cmd->bpp; fb->depth = mode_cmd->depth; return 0; } EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); int drm_helper_resume_force_mode(struct drm_device *dev) { struct drm_crtc *crtc; int ret; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->enabled) continue; ret = drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb); if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); } /* disable the unused connectors while restoring the modesetting */ drm_helper_disable_unused_functions(dev); return 0; } EXPORT_SYMBOL(drm_helper_resume_force_mode);