Adding a new module that tracks the number of bytes/packets transfered by a network interface, even after the interface has been removed.
This is relevant to track the total data usage in mobile devices whose interfaces are added and removed quite frequently (WiFi, Bluetooth, 3G,..).
Monitoring is done only for devices that are configured with a valid IP address (check to exclude virtual/loopback/tunnel interfaces).
Change-Id: I8ac642af1990433ebd0784e8dbd72bf0714b5bf6
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Included a little modification for the out-of-date HD2 .32 kernel.
- Now button backlight is managed by this driver, also it is configurable by sysfs (number of secs. after backlight will be turned off after last key-press, enable/disable this auto_off feature)
-When disabled auto_off, backlight will go off along with screen backlight.
- Sysfs for num. of seconds : /sys/devices/platform/btn_backlight_manager/off_seconds
(min: 5 sec, max: 60 sec)
- Sysfs for turn on/off auto-off feature: /sys/devices/platform/btn_backlight_manager/auto_off
(0 to disable auto-off, 1 to enable)
- remove all lights.*.so files from /system/lib/hw (backup if u want) and replace with lights.qsd8k.so from Bravo ROM or download from http://www.multiupload.com/2M5T02M3TU
- if button backlight don’t work: turn screen on, press any key and put phone under bright light ( this should activate light sensor and backlight)
Conflicts:
arch/arm/configs/htcleo_defconfig
arch/arm/mach-msm/board-htcleo.h
Add commit from 654ce990ab
For most people the driver works good. I checked the coefficients and the pd_m for the 1230 Battery is correct, so the voltage calculating is ok.
We need a other test to check the pd_t value for the voltage temperatur correction. Still no battery detection. Wince can detect it, we have to find out how this works.
Some identification is missed, have to find it. if I create the devices with node 0, then the driver will have 1. If I do 1 the driver will have 0 . . argh. But do simple a link from 0 ->1 and then it works.
ln -s /dev/msm_camera/control0 /dev/msm_camera/control1
ln -s /dev/msm_camera/frame0 /dev/msm_camera/frame1
ln -s /dev/msm_camera/config0 /dev/msm_camera/config1
