initial push

Android.mk

@@ -0,0 +1,25 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+ifeq ($(TARGET_DEVICE),galaxys2)
+
+ifneq ($(TARGET_SIMULATOR),true)
+include $(call all-makefiles-under,$(LOCAL_PATH))
+endif
+
+endif
+
+

AndroidBoard.mk

@@ -0,0 +1,8 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+ALL_PREBUILT += $(INSTALLED_KERNEL_TARGET)
+
+# include the non-open-source counterpart to this file
+-include vendor/samsung/galaxys2/AndroidBoardVendor.mk

AndroidProducts.mk

@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2008 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#
+# This file should set PRODUCT_MAKEFILES to a list of product makefiles
+# to expose to the build system.  LOCAL_DIR will already be set to
+# the directory containing this file.
+#
+# This file may not rely on the value of any variable other than
+# LOCAL_DIR; do not use any conditionals, and do not look up the
+# value of any variable that isn't set in this file or in a file that
+# it includes.
+#
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/full_galaxys2.mk

BoardConfig.mk

@@ -0,0 +1,101 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# BoardConfig.mk
+#
+# Product-specific compile-time definitions.
+#
+
+# Set this up here so that BoardVendorConfig.mk can override it
+BOARD_USES_GENERIC_AUDIO := false
+BOARD_USES_LIBSECRIL_STUB := true
+
+# Use the non-open-source parts, if they're present
+-include vendor/samsung/galaxys2/BoardConfigVendor.mk
+
+TARGET_CPU_ABI := armeabi-v7a
+TARGET_CPU_ABI2 := armeabi
+TARGET_ARCH_VARIANT := armv7-a-neon
+ARCH_ARM_HAVE_TLS_REGISTER := true
+TARGET_GLOBAL_CFLAGS += -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
+TARGET_GLOBAL_CPPFLAGS += -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
+
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_RADIOIMAGE := true
+
+TARGET_PROVIDES_INIT := true
+TARGET_PROVIDES_INIT_TARGET_RC := true
+TARGET_BOARD_PLATFORM := s5pv310
+TARGET_BOOTLOADER_BOARD_NAME := c1
+TARGET_RECOVERY_INITRC := device/samsung/c1-common/recovery.rc
+
+BOARD_MOBILEDATA_INTERFACE_NAME = "pdp0"
+
+# Camera
+USE_CAMERA_STUB := false
+ifeq ($(USE_CAMERA_STUB),false)
+BOARD_CAMERA_LIBRARIES := libcamera
+endif
+
+# Bluetooth
+BOARD_HAVE_BLUETOOTH := true
+BOARD_HAVE_BLUETOOTH_BCM := true
+
+# FM Radio
+BOARD_HAVE_FM_RADIO := true
+BOARD_GLOBAL_CFLAGS += -DHAVE_FM_RADIO
+BOARD_FM_DEVICE := si4709
+
+# FIXME
+BOARD_NAND_PAGE_SIZE := 4096 -s 128
+# FIXME
+BOARD_KERNEL_PAGESIZE := 4096
+BOARD_KERNEL_BASE := 0x40000000
+BOARD_KERNEL_CMDLINE := console=ttySAC2,115200 consoleblank=0
+TARGET_PREBUILT_KERNEL := device/samsung/galaxys2/kernel
+
+BOARD_BOOTIMAGE_PARTITION_SIZE := 8388608
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 536870912
+# FIXME
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 8388608
+# FIXME
+BOARD_FLASH_BLOCK_SIZE := 4096
+
+# Connectivity - Wi-Fi
+WPA_SUPPLICANT_VERSION := VER_0_6_X
+BOARD_WPA_SUPPLICANT_DRIVER := WEXT
+BOARD_WLAN_DEVICE := bcm4330
+WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/dhd.ko"
+WIFI_DRIVER_FW_STA_PATH     := "system/vendor/firmware/bcm4330_sta.bin"
+WIFI_DRIVER_FW_AP_PATH      := ""
+WIFI_DRIVER_MODULE_NAME     :=  "dhd"
+WIFI_DRIVER_MODULE_ARG      :=  "firmware_path=/system/vendor/firmware/bcm4330_sta.bin nvram_path=/system/vendor/firmware/nvram_net.txt"
+
+# Vold
+BOARD_VOLD_EMMC_SHARES_DEV_MAJOR := true
+
+# Recovery
+TARGET_USERIMAGES_USE_EXT4 := true
+BOARD_HAS_NO_SELECT_BUTTON := true
+BOARD_USES_MMCUTILS := true
+BOARD_HAS_NO_MISC_PARTITION := true
+
+BOARD_CUSTOM_BOOTIMG_MK := device/samsung/c1-common/shbootimg.mk
+TARGET_RECOVERY_PRE_COMMAND="echo 1 > /cache/.startrecovery; sync;"
+
+# assert
+TARGET_OTA_ASSERT_DEVICE := galaxys2,GT-I9100
+
+# Include aries specific stuff
+-include device/samsung/c1-common/Android.mk

CleanSpec.mk

@@ -0,0 +1,60 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+$(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+$(call add-clean-step, rm -rf $(TARGET_OUT)/build.prop)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/SHARED_LIBRARIES/libaudio_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/SHARED_LIBRARIES/libaudio_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/STATIC_LIBRARIES/libasound_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/EXECUTABLES/alsa_*)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/system/bin/alsa_*)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/system/etc/asound.conf)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/system/usr/share/alsa)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/PACKAGING/systemimage_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/galaxys2/obj/SHARED_LIBRARIES/libaudio_intermediates)

board-info.txt

@@ -0,0 +1,3 @@
+require board=c1
+require version-bootloader=I9100XWKE7
+require version-baseband=I9100XWKE7

extract-files.sh

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DEVICE=galaxys2
+COMMON=c1-common
+MANUFACTURER=samsung
+
+mkdir -p ../../../vendor/$MANUFACTURER/$DEVICE/proprietary
+mkdir -p ../../../vendor/$MANUFACTURER/$COMMON/proprietary
+
+# galaxys2
+
+
+# c1-common
+
+
+
+(cat << EOF) | sed s/__DEVICE__/$DEVICE/g | sed s/__MANUFACTURER__/$MANUFACTURER/g > ../../../vendor/$MANUFACTURER/$DEVICE/$DEVICE-vendor-blobs.mk
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Prebuilt libraries that are needed to build open-source libraries
+PRODUCT_COPY_FILES := \\
+
+# All the blobs necessary for galaxys2 devices
+PRODUCT_COPY_FILES += \\
+
+EOF
+
+
+(cat << EOF) | sed s/__COMMON__/$COMMON/g | sed s/__MANUFACTURER__/$MANUFACTURER/g > ../../../vendor/$MANUFACTURER/$COMMON/c1-vendor-blobs.mk
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# All the blobs necessary for galaxys devices
+PRODUCT_COPY_FILES += \\
+
+EOF
+
+./setup-makefiles.sh

full_galaxys2.mk

@@ -0,0 +1,37 @@
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# This file is the build configuration for a full Android
+# build for crespo hardware. This cleanly combines a set of
+# device-specific aspects (drivers) with a device-agnostic
+# product configuration (apps).
+#
+
+# Inherit from those products. Most specific first.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
+# This is where we'd set a backup provider if we had one
+#$(call inherit-product, device/sample/products/backup_overlay.mk)
+$(call inherit-product, device/samsung/galaxys2/galaxys2.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full.mk)
+
+# Galaxy S uses high-density artwork where available
+PRODUCT_LOCALES += hdpi
+
+# Discard inherited values and use our own instead.
+PRODUCT_NAME := full_galaxys2
+PRODUCT_DEVICE := galaxys2
+PRODUCT_BRAND := samsung
+PRODUCT_MANUFACTURER := samsung
+PRODUCT_MODEL := GT-I9100

galaxys2.mk

@@ -0,0 +1,153 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# This file is the device-specific product definition file for
+# crespo. It lists all the overlays, files, modules and properties
+# that are specific to this hardware: i.e. those are device-specific
+# drivers, configuration files, settings, etc...
+
+# Note that crespo is not a fully open device. Some of the drivers
+# aren't publicly available in all circumstances, which means that some
+# of the hardware capabilities aren't present in builds where those
+# drivers aren't available. Such cases are handled by having this file
+# separated into two halves: this half here contains the parts that
+# are available to everyone, while another half in the vendor/ hierarchy
+# augments that set with the parts that are only relevant when all the
+# associated drivers are available. Aspects that are irrelevant but
+# harmless in no-driver builds should be kept here for simplicity and
+# transparency. There are two variants of the half that deals with
+# the unavailable drivers: one is directly checked into the unreleased
+# vendor tree and is used by engineers who have access to it. The other
+# is generated by setup-makefile.sh in the same directory as this files,
+# and is used by people who have access to binary versions of the drivers
+# but not to the original vendor tree. Be sure to update both.
+
+
+# These is the hardware-specific overlay, which points to the location
+# of hardware-specific resource overrides, typically the frameworks and
+# application settings that are stored in resourced.
+DEVICE_PACKAGE_OVERLAYS := device/samsung/c1-common/overlay
+
+# These are the hardware-specific configuration files
+PRODUCT_COPY_FILES := \
+	device/samsung/c1-common/asound.conf:system/etc/asound.conf \
+	device/samsung/c1-common/gps.conf:system/etc/gps.conf \
+	device/samsung/c1-common/nvram_net.txt:system/etc/nvram_net.txt \
+	device/samsung/c1-common/sirfgps.conf:system/etc/sirfgps.conf \
+	device/samsung/c1-common/vold.fstab:system/etc/vold.fstab \
+	device/samsung/c1-common/egl.cfg:system/lib/egl/egl.cfg
+
+# Init files
+PRODUCT_COPY_FILES += \
+	device/samsung/c1-common/init.c1.rc:root/init.c1.rc \
+	device/samsung/c1-common/ueventd.c1.rc:root/ueventd.c1.rc
+
+# Prebuilt kl keymaps
+PRODUCT_COPY_FILES += \
+	device/samsung/c1-common/keylayout/AVRCP.kl:system/usr/keylayout/AVRCP.kl \
+	device/samsung/c1-common/keylayout/Broadcom_Bluetooth_HID.kl:system/usr/keylayout/Broadcom_Bluetooth_HID.kl \
+	device/samsung/c1-common/keylayout/qwerty.kl:system/usr/keylayout/qwerty.kl \
+	device/samsung/c1-common/keylayout/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
+	device/samsung/c1-common/keylayout/sec_key.kl:system/usr/keylayout/sec_key.kl \
+	device/samsung/c1-common/keylayout/sec_touchkey.kl:system/usr/keylayout/sec_touchkey.kl
+
+# configuration files
+PRODUCT_COPY_FILES += \
+	device/samsung/c1-common/media_profiles.xml:system/etc/media_profiles.xml
+
+# apns config file
+PRODUCT_COPY_FILES += \
+        vendor/cyanogen/prebuilt/common/etc/apns-conf.xml:system/etc/apns-conf.xml
+
+# These are the hardware-specific features
+PRODUCT_COPY_FILES += \
+	frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
+	frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
+	frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
+	frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
+        frameworks/base/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml \
+	frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
+	frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
+	frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
+	frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
+	frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
+	frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
+	packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml
+
+# The OpenGL ES API level that is natively supported by this device.
+# This is a 16.16 fixed point number
+PRODUCT_PROPERTY_OVERRIDES := \
+    ro.opengles.version=131072
+
+# These are the hardware-specific settings that are stored in system properties.
+# Note that the only such settings should be the ones that are too low-level to
+# be reachable from resources or other mechanisms.
+PRODUCT_PROPERTY_OVERRIDES += \
+       wifi.interface=eth0 \
+       wifi.supplicant_scan_interval=20 \
+       ro.telephony.ril_class=samsung \
+       mobiledata.interfaces=pdp0,eth0,gprs,ppp0 \
+       dalvik.vm.heapsize=32m \
+       persist.service.usb.setting=0 \
+       dev.sfbootcomplete=0
+
+# enable Google-specific location features,
+# like NetworkLocationProvider and LocationCollector
+PRODUCT_PROPERTY_OVERRIDES += \
+        ro.com.google.locationfeatures=1 \
+        ro.com.google.networklocation=1
+
+# Extended JNI checks
+# The extended JNI checks will cause the system to run more slowly, but they can spot a variety of nasty bugs 
+# before they have a chance to cause problems.
+# Default=true for development builds, set by android buildsystem.
+PRODUCT_PROPERTY_OVERRIDES += \
+    ro.kernel.android.checkjni=0 \
+    dalvik.vm.checkjni=false
+
+# we have enough storage space to hold precise GC data
+PRODUCT_TAGS += dalvik.gc.type-precise
+
+# Screen density is actually considered a locale (since it is taken into account
+# the the build-time selection of resources). The product definitions including
+# this file must pay attention to the fact that the first entry in the final
+# PRODUCT_LOCALES expansion must not be a density.
+PRODUCT_LOCALES := hdpi
+
+# kernel modules
+PRODUCT_COPY_FILES += \
+    device/samsung/galaxys2/dhd.ko:system/lib/modules/dhd.ko \
+    device/samsung/galaxys2/cifs.ko:system/lib/modules/cifs.ko \
+    device/samsung/galaxys2/bthid.ko:system/lib/modules/bthid.ko \
+    device/samsung/galaxys2/j4fs.ko:system/lib/modules/j4fs.ko \
+    device/samsung/galaxys2/vibrator.ko:system/lib/modules/vibrator.ko \
+    device/samsung/galaxys2/gspca_main.ko:system/lib/modules/gspca_main.ko \
+    device/samsung/galaxys2/Si4709_driver.ko:system/lib/modules/Si4709_driver.ko \
+    device/samsung/galaxys2/scsi_wait_scan.ko:system/lib/modules/scsi_wait_scan.ko
+
+ifeq ($(TARGET_PREBUILT_KERNEL),)
+    LOCAL_KERNEL := device/samsung/galaxys2/kernel
+else
+    LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
+endif
+
+PRODUCT_COPY_FILES += \
+    $(LOCAL_KERNEL):kernel
+
+# See comment at the top of this file. This is where the other
+# half of the device-specific product definition file takes care
+# of the aspects that require proprietary drivers that aren't
+# commonly available
+$(call inherit-product-if-exists, vendor/samsung/galaxys2/galaxys2-vendor.mk)

recovery.fstab

@@ -0,0 +1,12 @@
+# mount point	fstype		device
+
+/boot		emmc		/dev/block/mmcblk0p5
+/recovery	emmc		/dev/block/mmcblk0p6
+
+/cache		ext4		/dev/block/mmcblk0p7
+/system		ext4		/dev/block/mmcblk0p9
+/data		ext4		/dev/block/mmcblk0p10
+
+/ums    	ext4		/dev/block/mmcblk0p11
+/sdcard		vfat		/dev/block/
+/emmc		vfat		/dev/block/

setup-makefiles.sh

@@ -0,0 +1,111 @@
+#!/bin/sh
+
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DEVICE=galaxys2
+COMMON=c1-common
+MANUFACTURER=samsung
+
+mkdir -p ../../../vendor/$MANUFACTURER/$DEVICE
+
+(cat << EOF) | sed s/__DEVICE__/$DEVICE/g | sed s/__MANUFACTURER__/$MANUFACTURER/g | sed s/__COMMON__/$COMMON/g > ../../../vendor/$MANUFACTURER/$DEVICE/$DEVICE-vendor.mk
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Live wallpaper packages and Themes
+PRODUCT_PACKAGES := \\
+    LiveWallpapers \\
+    LiveWallpapersPicker \\
+    MagicSmokeWallpapers \\
+    VisualizationWallpapers \\
+    librs_jni
+
+# Publish that we support the live wallpaper feature.
+PRODUCT_COPY_FILES := \\
+    packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:/system/etc/permissions/android.software.live_wallpaper.xml
+
+# Pick up overlay for features that depend on non-open-source files
+DEVICE_PACKAGE_OVERLAYS := vendor/__MANUFACTURER__/c1-common/overlay
+
+\$(call inherit-product, vendor/__MANUFACTURER__/__DEVICE__/__DEVICE__-vendor-blobs.mk)
+\$(call inherit-product, vendor/__MANUFACTURER__/__COMMON__/c1-vendor-blobs.mk)
+EOF
+
+
+(cat << EOF) | sed s/__DEVICE__/$DEVICE/g | sed s/__MANUFACTURER__/$MANUFACTURER/g > ../../../vendor/$MANUFACTURER/$DEVICE/BoardConfigVendor.mk
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+BOARD_GPS_LIBRARIES := libgps
+
+USE_CAMERA_STUB := false
+
+BOARD_USES_GENERIC_AUDIO := false
+
+BOARD_USES_LIBSECRIL_STUB := false
+
+BOARD_NO_PAGE_FLIPPING := false
+BOARD_NO_32BPP := false
+
+EOF
+
+
+mkdir -p ../../../vendor/$MANUFACTURER/$COMMON/overlay/packages/apps/Launcher2/res/layout
+(cat << EOF) | sed s/__DEVICE__/$DEVICE/g | sed s/__MANUFACTURER__/$MANUFACTURER/g > ../../../vendor/$MANUFACTURER/$COMMON/overlay/packages/apps/Launcher2/res/layout/all_apps.xml
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2010 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- This file is generated by device/__MANUFACTURER__/__DEVICE__/setup-makefiles.sh -->
+
+<!-- switch to all_apps_3d on devices that support RenderScript -->
+<merge xmlns:android="http://schemas.android.com/apk/res/android">
+    <include layout="@layout/all_apps_3d" />
+</merge>
+EOF

vendorsetup.sh

@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2008 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This file is executed by build/envsetup.sh, and can use anything
+# defined in envsetup.sh.
+#
+# In particular, you can add lunch options with the add_lunch_combo
+# function: add_lunch_combo generic-eng
+
+add_lunch_combo full_galaxys2-eng