<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2009, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->

<!-- These resources are around just to allow their values to be customized
     for different hardware and product builds. -->
<resources>
    <!-- Flag indicating whether we should enable the automatic brightness in Settings.
         config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
    <bool name="config_automatic_brightness_available">true</bool>

    <!-- There is no charging LED. -->
    <bool name="config_unplugTurnsOnScreen">true</bool>

    <!-- Our amoled doesn't animate well. -->
    <bool name="config_animateScreenLights">false</bool>

    <!-- disable menu hard key on Crespo in non-pattern lockscreen -->
    <bool name="config_disableMenuKeyInLockScreen">true</bool>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 zones as follows:

         Zone 0:        0 <= LUX < array[0]
         Zone 1:        array[0] <= LUX < array[1]
         ...
         Zone N:        array[N - 1] <= LUX < array[N]
         Zone N + 1:    array[N] <= LUX < infinity

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
        <item>10</item>
        <item>160</item>
        <item>225</item>
        <item>320</item>
        <item>640</item>
        <item>1280</item>
        <item>2600</item>
        <item>10240</item>
    </integer-array>

    <!-- Array of output values for LCD backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
    -->
    <integer-array name="config_autoBrightnessLcdBacklightValues">
        <item>20</item>
        <item>20</item>
        <item>20</item>
        <item>20</item>
        <item>35</item>
        <item>50</item>
        <item>50</item>
        <item>100</item>
        <item>255</item>
    </integer-array>

    <!-- Array of output values for button backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
    -->
    <integer-array name="config_autoBrightnessButtonBacklightValues">
        <item>255</item>
        <item>255</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
    </integer-array>

    <!-- Array of output values for keyboard backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         Crespo has no keyboard so all values are zero.
    -->
    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
    </integer-array>
    
    <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 
         specified -->
    <string name="default_wallpaper_component">com.android.wallpaper/.nexus.NexusWallpaper</string>

    <integer name="config_deskDockKeepsScreenOn">0</integer>
    <integer name="config_carDockKeepsScreenOn">1</integer>

    <!-- Default color for notification LED is white -->
    <color name="config_defaultNotificationColor">#ffffffff</color>

    <!-- Default blink frequency for notification LED is 9 seconds. -->
    <integer name="config_defaultNotificationLedOff">9000</integer>

    <!-- Component name of the service providing network location support. -->
    <string name="config_networkLocationProvider">com.google.android.location.NetworkLocationProvider</string>

    <!-- Component name of the service providing geocoder API support. -->
    <string name="config_geocodeProvider">com.google.android.location.GeocodeProvider</string>


    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
         Please don't copy them, copy anything else. -->

    <!-- This string array should be overridden by the device to present a list of network
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[Connection name],[ConnectivityManager connection type],
         [associated radio-type],[priority]  -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1"</item>
        <item>"mobile,0,0,0"</item>
        <item>"mobile_mms,2,0,2"</item>
        <item>"mobile_supl,3,0,2"</item>
        <item>"mobile_dun,4,0,4"</item>
        <item>"mobile_hipri,5,0,3"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
    <string-array translatable="false" name="config_tether_usb_regexs">
        <item>"usb0"</item>
    </string-array>

    <!-- Regex array of allowable upstream ifaces for tethering - for example if you want
         tethering on a new interface called "foo2" add <item>"foo\\d"</item> to the array -->
    <string-array translatable="false" name="config_tether_upstream_regexs">
        <item>"pdp\\d"</item>
        <item>"eth\\d"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
        <item>"wl0.1"</item>
    </string-array>


    <!-- Boolean indicating if we require the use of DUN on mobile for tethering -->
    <bool translatable="false" name="config_tether_dun_required">false</bool>

    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
    <integer-array name="config_keyboardTapVibePattern">
        <item>30</item>
    </integer-array>

    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
    <integer-array name="config_safeModeDisabledVibePattern">
        <item>1</item>
    </integer-array>

    <!-- crespo doesn't handle this blur effect very quickly. -->
    <bool name="config_sf_slowBlur">true</bool>


    <!-- Boolean indicating if restoring network selection should be skipped -->
    <!-- The restoring is handled by modem if it is true -->
    <bool translatable="false" name="skip_restoring_network_selection">true</bool>
</resources>
