android_bootable_recovery/bootloader.c
Doug Zongker 687bc12ccf save the recovery log from before HTC firmware updates
When doing a firmware (radio or hboot) update on HTC devices, save the
recovery log in block 1 of the cache partition, before the firmware
image and the UI bitmaps.  When we boot back into recovery after the
firmware update to reformat the cache partition, copy that log out of
cache before reformatting it and dump it into the current invocation's
log.

The practical upshot of all this is that we can see the log output
from radio and hboot updates.

Change-Id: Ie0e89566754c88f4bed6a90d8a0aa04047b01a27
2010-01-21 12:50:04 -08:00

371 lines
12 KiB
C

/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "bootloader.h"
#include "common.h"
#include "mtdutils/mtdutils.h"
#include "roots.h"
#include <errno.h>
#include <stdio.h>
#include <string.h>
static const char *CACHE_NAME = "CACHE:";
static const char *MISC_NAME = "MISC:";
static const int MISC_PAGES = 3; // number of pages to save
static const int MISC_COMMAND_PAGE = 1; // bootloader command is this page
#ifdef LOG_VERBOSE
static void dump_data(const char *data, int len) {
int pos;
for (pos = 0; pos < len; ) {
printf("%05x: %02x", pos, data[pos]);
for (++pos; pos < len && (pos % 24) != 0; ++pos) {
printf(" %02x", data[pos]);
}
printf("\n");
}
}
#endif
int get_bootloader_message(struct bootloader_message *out) {
size_t write_size;
const MtdPartition *part = get_root_mtd_partition(MISC_NAME);
if (part == NULL || mtd_partition_info(part, NULL, NULL, &write_size)) {
LOGE("Can't find %s\n", MISC_NAME);
return -1;
}
MtdReadContext *read = mtd_read_partition(part);
if (read == NULL) {
LOGE("Can't open %s\n(%s)\n", MISC_NAME, strerror(errno));
return -1;
}
const ssize_t size = write_size * MISC_PAGES;
char data[size];
ssize_t r = mtd_read_data(read, data, size);
if (r != size) LOGE("Can't read %s\n(%s)\n", MISC_NAME, strerror(errno));
mtd_read_close(read);
if (r != size) return -1;
#ifdef LOG_VERBOSE
printf("\n--- get_bootloader_message ---\n");
dump_data(data, size);
printf("\n");
#endif
memcpy(out, &data[write_size * MISC_COMMAND_PAGE], sizeof(*out));
return 0;
}
int set_bootloader_message(const struct bootloader_message *in) {
size_t write_size;
const MtdPartition *part = get_root_mtd_partition(MISC_NAME);
if (part == NULL || mtd_partition_info(part, NULL, NULL, &write_size)) {
LOGE("Can't find %s\n", MISC_NAME);
return -1;
}
MtdReadContext *read = mtd_read_partition(part);
if (read == NULL) {
LOGE("Can't open %s\n(%s)\n", MISC_NAME, strerror(errno));
return -1;
}
ssize_t size = write_size * MISC_PAGES;
char data[size];
ssize_t r = mtd_read_data(read, data, size);
if (r != size) LOGE("Can't read %s\n(%s)\n", MISC_NAME, strerror(errno));
mtd_read_close(read);
if (r != size) return -1;
memcpy(&data[write_size * MISC_COMMAND_PAGE], in, sizeof(*in));
#ifdef LOG_VERBOSE
printf("\n--- set_bootloader_message ---\n");
dump_data(data, size);
printf("\n");
#endif
MtdWriteContext *write = mtd_write_partition(part);
if (write == NULL) {
LOGE("Can't open %s\n(%s)\n", MISC_NAME, strerror(errno));
return -1;
}
if (mtd_write_data(write, data, size) != size) {
LOGE("Can't write %s\n(%s)\n", MISC_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
if (mtd_write_close(write)) {
LOGE("Can't finish %s\n(%s)\n", MISC_NAME, strerror(errno));
return -1;
}
LOGI("Set boot command \"%s\"\n", in->command[0] != 255 ? in->command : "");
return 0;
}
/* Update Image
*
* - will be stored in the "cache" partition
* - bad blocks will be ignored, like boot.img and recovery.img
* - the first block will be the image header (described below)
* - the size is in BYTES, inclusive of the header
* - offsets are in BYTES from the start of the update header
* - two raw bitmaps will be included, the "busy" and "fail" bitmaps
* - for dream, the bitmaps will be 320x480x16bpp RGB565
*/
#define UPDATE_MAGIC "MSM-RADIO-UPDATE"
#define UPDATE_MAGIC_SIZE 16
#define UPDATE_VERSION 0x00010000
struct update_header {
unsigned char MAGIC[UPDATE_MAGIC_SIZE];
unsigned version;
unsigned size;
unsigned image_offset;
unsigned image_length;
unsigned bitmap_width;
unsigned bitmap_height;
unsigned bitmap_bpp;
unsigned busy_bitmap_offset;
unsigned busy_bitmap_length;
unsigned fail_bitmap_offset;
unsigned fail_bitmap_length;
};
#define LOG_MAGIC "LOGmagic"
#define LOG_MAGIC_SIZE 8
int write_update_for_bootloader(
const char *update, int update_length,
int bitmap_width, int bitmap_height, int bitmap_bpp,
const char *busy_bitmap, const char *fail_bitmap,
const char *log_filename) {
if (ensure_root_path_unmounted(CACHE_NAME)) {
LOGE("Can't unmount %s\n", CACHE_NAME);
return -1;
}
const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
if (part == NULL) {
LOGE("Can't find %s\n", CACHE_NAME);
return -1;
}
MtdWriteContext *write = mtd_write_partition(part);
if (write == NULL) {
LOGE("Can't open %s\n(%s)\n", CACHE_NAME, strerror(errno));
return -1;
}
/* Write an invalid (zero) header first, to disable any previous
* update and any other structured contents (like a filesystem),
* and as a placeholder for the amount of space required.
*/
struct update_header header;
memset(&header, 0, sizeof(header));
const ssize_t header_size = sizeof(header);
if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
LOGE("Can't write header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
/* Write each section individually block-aligned, so we can write
* each block independently without complicated buffering.
*/
memcpy(&header.MAGIC, UPDATE_MAGIC, UPDATE_MAGIC_SIZE);
header.version = UPDATE_VERSION;
header.size = header_size;
if (log_filename != NULL) {
// Write 1 byte into the following block, then fill to the end
// in order to reserve that block. We'll use the block to
// send a copy of the log through to the next invocation of
// recovery. We write the log as late as possible in order to
// capture any messages emitted by this function.
mtd_erase_blocks(write, 0);
if (mtd_write_data(write, (char*) &header, 1) != 1) {
LOGE("Can't write log block to %s\n(%s)\n",
CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
}
off_t image_start_pos = mtd_erase_blocks(write, 0);
header.image_length = update_length;
if ((int) header.image_offset == -1 ||
mtd_write_data(write, update, update_length) != update_length) {
LOGE("Can't write update to %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
off_t busy_start_pos = mtd_erase_blocks(write, 0);
header.image_offset = mtd_find_write_start(write, image_start_pos);
header.bitmap_width = bitmap_width;
header.bitmap_height = bitmap_height;
header.bitmap_bpp = bitmap_bpp;
int bitmap_length = (bitmap_bpp + 7) / 8 * bitmap_width * bitmap_height;
header.busy_bitmap_length = busy_bitmap != NULL ? bitmap_length : 0;
if ((int) header.busy_bitmap_offset == -1 ||
mtd_write_data(write, busy_bitmap, bitmap_length) != bitmap_length) {
LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
off_t fail_start_pos = mtd_erase_blocks(write, 0);
header.busy_bitmap_offset = mtd_find_write_start(write, busy_start_pos);
header.fail_bitmap_length = fail_bitmap != NULL ? bitmap_length : 0;
if ((int) header.fail_bitmap_offset == -1 ||
mtd_write_data(write, fail_bitmap, bitmap_length) != bitmap_length) {
LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
mtd_erase_blocks(write, 0);
header.fail_bitmap_offset = mtd_find_write_start(write, fail_start_pos);
/* Write the header last, after all the blocks it refers to, so that
* when the magic number is installed everything is valid.
*/
if (mtd_write_close(write)) {
LOGE("Can't finish writing %s\n(%s)\n", CACHE_NAME, strerror(errno));
return -1;
}
write = mtd_write_partition(part);
if (write == NULL) {
LOGE("Can't reopen %s\n(%s)\n", CACHE_NAME, strerror(errno));
return -1;
}
if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
LOGE("Can't rewrite header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
if (log_filename != NULL) {
size_t erase_size;
if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
LOGE("Error reading block size\n(%s)\n", strerror(errno));
mtd_write_close(write);
return -1;
}
mtd_erase_blocks(write, 0);
if (erase_size > 0) {
char* log = malloc(erase_size);
FILE* f = fopen(log_filename, "rb");
// The fseek() may fail if it tries to go before the
// beginning of the log, but that's okay because we want
// to be positioned at the start anyway.
fseek(f, -(erase_size-sizeof(size_t)-LOG_MAGIC_SIZE), SEEK_END);
memcpy(log, LOG_MAGIC, LOG_MAGIC_SIZE);
size_t read = fread(log+sizeof(size_t)+LOG_MAGIC_SIZE,
1, erase_size-sizeof(size_t)-LOG_MAGIC_SIZE, f);
LOGI("read %d bytes from log\n", (int)read);
*(size_t *)(log + LOG_MAGIC_SIZE) = read;
fclose(f);
if (mtd_write_data(write, log, erase_size) != erase_size) {
LOGE("failed to store log in cache partition\n(%s)\n",
strerror(errno));
mtd_write_close(write);
}
free(log);
}
}
if (mtd_erase_blocks(write, 0) != image_start_pos) {
LOGE("Misalignment rewriting %s\n(%s)\n", CACHE_NAME, strerror(errno));
mtd_write_close(write);
return -1;
}
if (mtd_write_close(write)) {
LOGE("Can't finish header of %s\n(%s)\n", CACHE_NAME, strerror(errno));
return -1;
}
return 0;
}
void recover_firmware_update_log() {
printf("recovering log from before firmware update\n");
const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
if (part == NULL) {
LOGE("Can't find %s\n", CACHE_NAME);
return;
}
MtdReadContext* read = mtd_read_partition(part);
size_t erase_size;
if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
LOGE("Error reading block size\n(%s)\n", strerror(errno));
mtd_read_close(read);
return;
}
char* buffer = malloc(erase_size);
if (mtd_read_data(read, buffer, erase_size) != erase_size) {
LOGE("Error reading header block\n(%s)\n", strerror(errno));
mtd_read_close(read);
free(buffer);
return;
}
if (mtd_read_data(read, buffer, erase_size) != erase_size) {
LOGE("Error reading log block\n(%s)\n", strerror(errno));
mtd_read_close(read);
free(buffer);
return;
}
mtd_read_close(read);
if (memcmp(buffer, LOG_MAGIC, LOG_MAGIC_SIZE) != 0) {
LOGE("No log from before firmware install\n");
free(buffer);
return;
}
size_t log_size = *(size_t *)(buffer + LOG_MAGIC_SIZE);
LOGI("header has %d bytes of log\n", (int)log_size);
printf("\n###\n### START RECOVERED LOG\n###\n\n");
fwrite(buffer + sizeof(size_t) + LOG_MAGIC_SIZE, 1, log_size, stdout);
printf("\n\n###\n### END RECOVERED LOG\n###\n\n");
free(buffer);
}