/* * Copyright (C) 2007 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "bootloader.h" #include "common.h" #include "cutils/properties.h" #include "firmware.h" #include "install.h" #include "minui/minui.h" #include "minzip/DirUtil.h" #include "roots.h" #include "recovery_ui.h" #include "extendedcommands.h" #include "commands.h" static const struct option OPTIONS[] = { { "send_intent", required_argument, NULL, 's' }, { "update_package", required_argument, NULL, 'u' }, { "wipe_data", no_argument, NULL, 'w' }, { "wipe_cache", no_argument, NULL, 'c' }, { NULL, 0, NULL, 0 }, }; static int allow_display_toggle = 1; static const char *COMMAND_FILE = "CACHE:recovery/command"; static const char *INTENT_FILE = "CACHE:recovery/intent"; static const char *LOG_FILE = "CACHE:recovery/log"; static const char *SDCARD_PACKAGE_FILE = "SDCARD:update.zip"; static const char *TEMPORARY_LOG_FILE = "/tmp/recovery.log"; /* * The recovery tool communicates with the main system through /cache files. * /cache/recovery/command - INPUT - command line for tool, one arg per line * /cache/recovery/log - OUTPUT - combined log file from recovery run(s) * /cache/recovery/intent - OUTPUT - intent that was passed in * * The arguments which may be supplied in the recovery.command file: * --send_intent=anystring - write the text out to recovery.intent * --update_package=root:path - verify install an OTA package file * --wipe_data - erase user data (and cache), then reboot * --wipe_cache - wipe cache (but not user data), then reboot * * After completing, we remove /cache/recovery/command and reboot. * Arguments may also be supplied in the bootloader control block (BCB). * These important scenarios must be safely restartable at any point: * * FACTORY RESET * 1. user selects "factory reset" * 2. main system writes "--wipe_data" to /cache/recovery/command * 3. main system reboots into recovery * 4. get_args() writes BCB with "boot-recovery" and "--wipe_data" * -- after this, rebooting will restart the erase -- * 5. erase_root() reformats /data * 6. erase_root() reformats /cache * 7. finish_recovery() erases BCB * -- after this, rebooting will restart the main system -- * 8. main() calls reboot() to boot main system * * OTA INSTALL * 1. main system downloads OTA package to /cache/some-filename.zip * 2. main system writes "--update_package=CACHE:some-filename.zip" * 3. main system reboots into recovery * 4. get_args() writes BCB with "boot-recovery" and "--update_package=..." * -- after this, rebooting will attempt to reinstall the update -- * 5. install_package() attempts to install the update * NOTE: the package install must itself be restartable from any point * 6. finish_recovery() erases BCB * -- after this, rebooting will (try to) restart the main system -- * 7. ** if install failed ** * 7a. prompt_and_wait() shows an error icon and waits for the user * 7b; the user reboots (pulling the battery, etc) into the main system * 8. main() calls maybe_install_firmware_update() * ** if the update contained radio/hboot firmware **: * 8a. m_i_f_u() writes BCB with "boot-recovery" and "--wipe_cache" * -- after this, rebooting will reformat cache & restart main system -- * 8b. m_i_f_u() writes firmware image into raw cache partition * 8c. m_i_f_u() writes BCB with "update-radio/hboot" and "--wipe_cache" * -- after this, rebooting will attempt to reinstall firmware -- * 8d. bootloader tries to flash firmware * 8e. bootloader writes BCB with "boot-recovery" (keeping "--wipe_cache") * -- after this, rebooting will reformat cache & restart main system -- * 8f. erase_root() reformats /cache * 8g. finish_recovery() erases BCB * -- after this, rebooting will (try to) restart the main system -- * 9. main() calls reboot() to boot main system */ static const int MAX_ARG_LENGTH = 4096; static const int MAX_ARGS = 100; // open a file given in root:path format, mounting partitions as necessary static FILE* fopen_root_path(const char *root_path, const char *mode) { if (ensure_root_path_mounted(root_path) != 0) { LOGE("Can't mount %s\n", root_path); return NULL; } char path[PATH_MAX] = ""; if (translate_root_path(root_path, path, sizeof(path)) == NULL) { LOGE("Bad path %s\n", root_path); return NULL; } // When writing, try to create the containing directory, if necessary. // Use generous permissions, the system (init.rc) will reset them. if (strchr("wa", mode[0])) dirCreateHierarchy(path, 0777, NULL, 1); FILE *fp = fopen(path, mode); if (fp == NULL && root_path != COMMAND_FILE) LOGE("Can't open %s\n", path); return fp; } // close a file, log an error if the error indicator is set static void check_and_fclose(FILE *fp, const char *name) { fflush(fp); if (ferror(fp)) LOGE("Error in %s\n(%s)\n", name, strerror(errno)); fclose(fp); } // command line args come from, in decreasing precedence: // - the actual command line // - the bootloader control block (one per line, after "recovery") // - the contents of COMMAND_FILE (one per line) static void get_args(int *argc, char ***argv) { struct bootloader_message boot; memset(&boot, 0, sizeof(boot)); get_bootloader_message(&boot); // this may fail, leaving a zeroed structure if (boot.command[0] != 0 && boot.command[0] != 255) { LOGI("Boot command: %.*s\n", sizeof(boot.command), boot.command); } if (boot.status[0] != 0 && boot.status[0] != 255) { LOGI("Boot status: %.*s\n", sizeof(boot.status), boot.status); } struct stat file_info; // --- if arguments weren't supplied, look in the bootloader control block if (*argc <= 1 && 0 != stat("/tmp/.ignorebootmessage", &file_info)) { boot.recovery[sizeof(boot.recovery) - 1] = '\0'; // Ensure termination const char *arg = strtok(boot.recovery, "\n"); if (arg != NULL && !strcmp(arg, "recovery")) { *argv = (char **) malloc(sizeof(char *) * MAX_ARGS); (*argv)[0] = strdup(arg); for (*argc = 1; *argc < MAX_ARGS; ++*argc) { if ((arg = strtok(NULL, "\n")) == NULL) break; (*argv)[*argc] = strdup(arg); } LOGI("Got arguments from boot message\n"); } else if (boot.recovery[0] != 0 && boot.recovery[0] != 255) { LOGE("Bad boot message\n\"%.20s\"\n", boot.recovery); } } // --- if that doesn't work, try the command file if (*argc <= 1) { FILE *fp = fopen_root_path(COMMAND_FILE, "r"); if (fp != NULL) { char *argv0 = (*argv)[0]; *argv = (char **) malloc(sizeof(char *) * MAX_ARGS); (*argv)[0] = argv0; // use the same program name char buf[MAX_ARG_LENGTH]; for (*argc = 1; *argc < MAX_ARGS; ++*argc) { if (!fgets(buf, sizeof(buf), fp)) break; (*argv)[*argc] = strdup(strtok(buf, "\r\n")); // Strip newline. } check_and_fclose(fp, COMMAND_FILE); LOGI("Got arguments from %s\n", COMMAND_FILE); } } // --> write the arguments we have back into the bootloader control block // always boot into recovery after this (until finish_recovery() is called) strlcpy(boot.command, "boot-recovery", sizeof(boot.command)); strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery)); int i; for (i = 1; i < *argc; ++i) { strlcat(boot.recovery, (*argv)[i], sizeof(boot.recovery)); strlcat(boot.recovery, "\n", sizeof(boot.recovery)); } set_bootloader_message(&boot); } void set_sdcard_update_bootloader_message() { struct bootloader_message boot; memset(&boot, 0, sizeof(boot)); strlcpy(boot.command, "boot-recovery", sizeof(boot.command)); strlcpy(boot.recovery, "recovery\n", sizeof(boot.recovery)); set_bootloader_message(&boot); } // clear the recovery command and prepare to boot a (hopefully working) system, // copy our log file to cache as well (for the system to read), and // record any intent we were asked to communicate back to the system. // this function is idempotent: call it as many times as you like. static void finish_recovery(const char *send_intent) { // By this point, we're ready to return to the main system... if (send_intent != NULL) { FILE *fp = fopen_root_path(INTENT_FILE, "w"); if (fp != NULL) { fputs(send_intent, fp); check_and_fclose(fp, INTENT_FILE); } } // Copy logs to cache so the system can find out what happened. FILE *log = fopen_root_path(LOG_FILE, "a"); if (log != NULL) { FILE *tmplog = fopen(TEMPORARY_LOG_FILE, "r"); if (tmplog == NULL) { LOGE("Can't open %s\n", TEMPORARY_LOG_FILE); } else { static long tmplog_offset = 0; fseek(tmplog, tmplog_offset, SEEK_SET); // Since last write char buf[4096]; while (fgets(buf, sizeof(buf), tmplog)) fputs(buf, log); tmplog_offset = ftell(tmplog); check_and_fclose(tmplog, TEMPORARY_LOG_FILE); } check_and_fclose(log, LOG_FILE); } // Reset the bootloader message to revert to a normal main system boot. struct bootloader_message boot; memset(&boot, 0, sizeof(boot)); set_bootloader_message(&boot); // Remove the command file, so recovery won't repeat indefinitely. char path[PATH_MAX] = ""; if (ensure_root_path_mounted(COMMAND_FILE) != 0 || translate_root_path(COMMAND_FILE, path, sizeof(path)) == NULL || (unlink(path) && errno != ENOENT)) { LOGW("Can't unlink %s\n", COMMAND_FILE); } sync(); // For good measure. } static int erase_root(const char *root) { ui_set_background(BACKGROUND_ICON_INSTALLING); ui_show_indeterminate_progress(); ui_print("Formatting %s...\n", root); return format_root_device(root); } static char** prepend_title(char** headers) { char* title[] = { EXPAND(RECOVERY_VERSION), "", NULL }; // count the number of lines in our title, plus the // caller-provided headers. int count = 0; char** p; for (p = title; *p; ++p, ++count); for (p = headers; *p; ++p, ++count); char** new_headers = malloc((count+1) * sizeof(char*)); char** h = new_headers; for (p = title; *p; ++p, ++h) *h = *p; for (p = headers; *p; ++p, ++h) *h = *p; *h = NULL; return new_headers; } int get_menu_selection(char** headers, char** items, int menu_only) { // throw away keys pressed previously, so user doesn't // accidentally trigger menu items. ui_clear_key_queue(); int item_count = ui_start_menu(headers, items); int selected = 0; int chosen_item = -1; while (chosen_item < 0 && chosen_item != GO_BACK) { int key = ui_wait_key(); int visible = ui_text_visible(); int action = device_handle_key(key, visible); if (action < 0) { switch (action) { case HIGHLIGHT_UP: --selected; selected = ui_menu_select(selected); break; case HIGHLIGHT_DOWN: ++selected; selected = ui_menu_select(selected); break; case SELECT_ITEM: chosen_item = selected; #ifdef KEY_POWER_IS_SELECT_ITEM if (chosen_item == item_count) { chosen_item = GO_BACK; } #endif break; case NO_ACTION: break; case GO_BACK: chosen_item = GO_BACK; break; } } else if (!menu_only) { chosen_item = action; } } ui_end_menu(); ui_clear_key_queue(); return chosen_item; } static void wipe_data(int confirm) { if (confirm) { static char** title_headers = NULL; if (title_headers == NULL) { char* headers[] = { "Confirm wipe of all user data?", " THIS CAN NOT BE UNDONE.", "", NULL }; title_headers = prepend_title(headers); } char* items[] = { " No", " No", " No", " No", " No", " No", " No", " Yes -- delete all user data", // [7] " No", " No", " No", NULL }; int chosen_item = get_menu_selection(title_headers, items, 1); if (chosen_item != 7) { return; } } ui_print("\n-- Wiping data...\n"); device_wipe_data(); erase_root("DATA:"); #ifdef HAS_DATADATA erase_root("DATADATA:"); #endif erase_root("CACHE:"); erase_root("SDEXT:"); ui_print("Data wipe complete.\n"); } static void prompt_and_wait() { char** headers = prepend_title(MENU_HEADERS); ui_print(EXPAND(RECOVERY_VERSION)"\n"); for (;;) { finish_recovery(NULL); ui_reset_progress(); allow_display_toggle = 1; int chosen_item = get_menu_selection(headers, MENU_ITEMS, 0); allow_display_toggle = 0; // device-specific code may take some action here. It may // return one of the core actions handled in the switch // statement below. chosen_item = device_perform_action(chosen_item); switch (chosen_item) { case ITEM_REBOOT: return; case ITEM_WIPE_DATA: wipe_data(ui_text_visible()); if (!ui_text_visible()) return; break; case ITEM_WIPE_CACHE: ui_print("\n-- Wiping cache...\n"); erase_root("CACHE:"); ui_print("Cache wipe complete.\n"); if (!ui_text_visible()) return; break; case ITEM_APPLY_SDCARD: ui_print("\n-- Install from sdcard...\n"); set_sdcard_update_bootloader_message(); int status = install_package(SDCARD_PACKAGE_FILE); if (status != INSTALL_SUCCESS) { ui_set_background(BACKGROUND_ICON_ERROR); ui_print("Installation aborted.\n"); } else if (!ui_text_visible()) { return; // reboot if logs aren't visible } else { if (firmware_update_pending()) { ui_print("\nReboot via menu to complete\n" "installation.\n"); } else { ui_print("\nInstall from sdcard complete.\n"); } } break; case ITEM_INSTALL_ZIP: show_install_update_menu(); break; case ITEM_NANDROID: show_nandroid_menu(); break; case ITEM_PARTITION: show_partition_menu(); break; case ITEM_ADVANCED: show_advanced_menu(); break; } } } static void print_property(const char *key, const char *name, void *cookie) { fprintf(stderr, "%s=%s\n", key, name); } int main(int argc, char **argv) { if (strstr(argv[0], "recovery") == NULL) { if (strstr(argv[0], "flash_image") != NULL) return flash_image_main(argc, argv); if (strstr(argv[0], "dump_image") != NULL) return dump_image_main(argc, argv); if (strstr(argv[0], "erase_image") != NULL) return erase_image_main(argc, argv); if (strstr(argv[0], "mkyaffs2image") != NULL) return mkyaffs2image_main(argc, argv); if (strstr(argv[0], "unyaffs") != NULL) return unyaffs_main(argc, argv); if (strstr(argv[0], "amend")) return amend_main(argc, argv); return busybox_driver(argc, argv); } create_fstab(); __system("/sbin/postrecoveryboot.sh"); int is_user_initiated_recovery = 0; time_t start = time(NULL); // If these fail, there's not really anywhere to complain... freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL); freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL); fprintf(stderr, "Starting recovery on %s", ctime(&start)); ui_init(); get_args(&argc, &argv); int previous_runs = 0; const char *send_intent = NULL; const char *update_package = NULL; int wipe_data = 0, wipe_cache = 0; int arg; while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) { switch (arg) { case 'p': previous_runs = atoi(optarg); break; case 's': send_intent = optarg; break; case 'u': update_package = optarg; break; case 'w': wipe_data = wipe_cache = 1; break; case 'c': wipe_cache = 1; break; case '?': LOGE("Invalid command argument\n"); continue; } } fprintf(stderr, "Command:"); for (arg = 0; arg < argc; arg++) { fprintf(stderr, " \"%s\"", argv[arg]); } fprintf(stderr, "\n\n"); property_list(print_property, NULL); fprintf(stderr, "\n"); int status = INSTALL_SUCCESS; RecoveryCommandContext ctx = { NULL }; if (register_update_commands(&ctx)) { LOGE("Can't install update commands\n"); } if (update_package != NULL) { if (wipe_data && erase_root("DATA:")) status = INSTALL_ERROR; status = install_package(update_package); if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n"); } else if (wipe_data) { if (device_wipe_data()) status = INSTALL_ERROR; if (erase_root("DATA:")) status = INSTALL_ERROR; if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR; if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n"); } else if (wipe_cache) { if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR; if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n"); } else { LOGI("Checking for extendedcommand...\n"); status = INSTALL_ERROR; // No command specified // we are starting up in user initiated recovery here // let's set up some default options signature_check_enabled = 0; script_assert_enabled = 0; is_user_initiated_recovery = 1; ui_set_show_text(1); if (extendedcommand_file_exists()) { LOGI("Running extendedcommand...\n"); int ret; if (0 == (ret = run_and_remove_extendedcommand())) { status = INSTALL_SUCCESS; ui_set_show_text(0); } else { handle_failure(ret); } } else { LOGI("Skipping execution of extendedcommand, file not found...\n"); } } if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) ui_set_background(BACKGROUND_ICON_ERROR); if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait(); // If there is a radio image pending, reboot now to install it. maybe_install_firmware_update(send_intent); // Otherwise, get ready to boot the main system... finish_recovery(send_intent); ui_print("Rebooting...\n"); sync(); reboot(RB_AUTOBOOT); return EXIT_SUCCESS; } int get_allow_toggle_display() { return allow_display_toggle; }